* Makefile.tpl (all.normal): Rename to all.
(all): Replace with a rule to pick the default
target from configure.
(all-gcc, configure-gcc): Use conditionals to
do nothing when toplevel bootstrap is going on.
(GCC directory bootstrap) [gcc-bootstrap]: Disable.
(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
* configure.in: Support --enable-bootstrap.
* Makefile.def: Remove new- prefix from toplevel
bootstrap targets.
* Makefile.tpl: Likewise.
* Makefile.def: Add bootstrap_stage 4. Add bootstrap2
target.
* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
$(RECURSE_FLAGS) to recursive invocation of make.
* Makefile.in: Regenerate.
* configure: Regenerate.
(STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
(NORMAL_TARGET_EXPORTS): New macros. Use them in all the recursive
targets.
* Makefile.in: Regenerate.
* Makefile.tpl: Whenever a recursive target is defined, wrap
it in a special @if/@endif block, and prepare its maybe
dependency in the @if/@endif block
* configure.in: Instead of writing maybe dependencies, remove
the @if/@endif statements, and remove the @if/@endif blocks
that remain.
* configure: Regenerate.
* Makefile.in: Regenerate.
2004-04-27 Paolo Bonzini <bonzini@gnu.org>
Revert:
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): Mark with the bootstrap
flag packages on which gcc depends.
* Makefile.tpl (all-bootstrap): Use it.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
* configure: Regenerate.
* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
* gcc/Makefile.tpl (compare): Use the result of the test.
* gcc/Makefile.in: Regenerate.
2004-04-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
Always relocate gcc and prev-gcc to the original names, even
if the build fails.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
New targets.
PR bootstrap/14871
* Makefile.tpl: If we don't have built-in-tree target tools,
use the ones found by configure rather than hacking around with
program_transform_name.
* configure.in: Give Makefile.tpl the information necessary
to do that.
* Makefile.in: Regenerate.
* configure: Regenerate.
2004-04-06 Nathanael Nerode <neroden@gcc.gnu.org>
PR bootstrap/14760
* configure.in: When computing baseargs, strip *all* copies of
offending options. Also, don't match/substitute the trailing space,
so that this actually works when two similar options are separated by
only one space.
* configure: Regenerate.
2004-04-06 David Edelsohn <edelsohn@gnu.org>
* configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
to set @stage2_werror_flag@.
* configure: Regenerate.
* Makefile.tpl (top level bootstrap support): Pass
@stage2_werror_flag@ down to configure in stages 2 and 3.
* Makefile.in: Regenerate.
* Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
for stages 2 and 3 as well as in make. As a consequence, remove
OUTPUT_OPTION (now detected by configure) from the flags passed down
to make.
* Makefile.in: Regenerate.
* Makefile.tpl (new-bootstrap): Fix typo.
* Makefile.in: Regenerate.
into their proper sections.
* Makefile.tpl (top level bootstrap support): Move disabling
of coverage flags from 'make' to 'configure'; improve comments.
* Makefile.in: Regenerate.
* Makefile.tpl (experimental top level bootstrap) Move stage1
language setting from all- target to configure- target; disable
intermodule optimization in stage 1; prevent gratuitous rebuilds
of stage 1.
* Makefile.in: Regenerate.
* configure.in: Comma-separate stage 1 language list for top
level bootstrap.
* configure: Regenerate.
* Makefile.tpl: Clean up experimental top level bootstrap support:
note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
prev-gcc in configure- targets as well as all- targets.
* Makefile.in: Regenerate.
* configure.in: Switch more things to use maybe dependencies.
* Makefile.tpl: Switch more things to use maybe dependencies.
Factor out common code from autogen IF statements.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.in: Switch more things to use maybe dependencies.
Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
* configure: Regenerate.
* Makefile.tpl: Switch more things to use maybe dependencies.
* Makefile.in: Regenerate.
<config>
* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
GCC_TOPLEV_SUBDIRS.
(multilib.ts): ... this. Moved into...
(multilib.out): ... this. Don't use sub-make.
($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
$(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
(configure-build-[+module+], configure-[+module+],
configure-target-[+module+], configure-gcc): ... these. Test
for Makefile existence. Drop config.status from dependencies.
* Makefile.in: Rebuilt.
* configure.in: Move gcc-version-trigger to the end of
ac_configure_args. Add comments to maybedep.tmp and
serdep.tmp. Introduce --disable-serial-configure. Remove
nonopt from baseargs, matching and removing corresponding
whitespace while at it.
* configure: Rebuilt.
program_transform_name to standard idiom.
(AUTOGEN, AUTOCONF): Define.
(Makefile.in): Use $(AUTOGEN).
(Makefile): Depend on config.status, and use autoconf-style rule to
build it. Move original commands to...
(config.status): ... this new target.
(configure): Add $(srcdir). Depend on config/acx.m4. Use
$(AUTOCONF).
* Makefile.in: Rebuilt.
* Makefile.tpl: Change dependency for */multilib.out so that
it works when gcc isn't in the tree.
* configure.in: Substitute more.
* configure: Run subconfigures from the Makefile.
* Makefile.tpl: Run subconfigures from the Makefile; add a few
convenience targets. Make sure gcc isn't rebuilt after bootstrap.
* configure.in: ...to here.
* configure.in: Separate subconfigure options added by this file from
options given by the user. Add machinery to put args for host
subconfigures into the Makefile.
* Makefile.tpl: Remove 'vault' targets.
* Makefile.tpl: Reorder and comment dependencies.
* Makefile.in: Regenerate.
(Continuing slow-motion replay)
* configure: More autoconf-style substitutions.
* Makefile.tpl: More autoconf-style substitutions.
* Makefile.in: Regenerate.
2002-11-30 Nathanael Nerode <neroden@gcc.gnu.org>
(Continuing slow-motion replay)
* configure: Substitute more variables in a more autoconf-friendly
way. Simplify slightly.
* Makefile.tpl: Make more variables substitutable in an
autoconf-friendly way.
* Makefile.in: Regenerate.
(Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
* configure: Remove 'removing', which doesn't work. Replace $subdir
with . everywhere. Replace $subdirs with ''. Replace $makesrcdir
with $srcdir. Reformat indentation. Substitute some variables
formerly hard-coded in the Makefile for build=host.
* Makefile.tpl: Autogenerate more; make more autoconf-friendly.
* Makefile.def: Autogenerate more.
* Makefile.in: Regenerate.
* Makefile.tpl: Make SET_LIB_PATH substitution more autoconfy.
* Makefile.tpl: Make RPATH_ENVVAR substitution more autoconfy.
* configure.in: Make SET_LIB_PATH substitution more autoconfy.
* configure.in: Make RPATH_ENVVAR substitution more autoconfy.
* Makefile.in: Regenerate.
* Makefile.tpl: Make more autoconf-friendly.
* Makefile.in: Regenerate.
* configure: Make substitution more autoconf-like.
2002-09-28 Richard Earnshaw <rearnsha@arm.com>
* configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
single entry to handle all these.
(arm-*-elf, strongarm-*-elf, xscale-*-elf): Likewise. Also enable
libjava on arm-*-elf.
* Makefile.def: New file.
* Makefile.tpl: New file.
* Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.
* configure.in: Minor rearrangement. Simplify tests.
