2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mn10300/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: d10v/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: erc32/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: frv/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: h8300/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: m32r/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mcore/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mips/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: v850/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: common/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* common.m4: New file, based on of aclocal.m4.
Index: arm/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
* interp.c (RAISE_EXCEPTION_IF_IN_DELAY_SLOT): New macro.
(in_delay_slot): New flag variable.
(Delay_Slot): Set in_delay_slot.
(sim_resume): Reset in_delay_slot after leaving code switch.
* gencode.c (op tab): Call RAISE_EXCEPTION_IF_IN_DELAY_SLOT for all
instructions not allowed in delay slots.
Commited by Corinna Vinschen <vinschen@redhat.com>
Introduce SH2a support.
* interp.c: Change type of jump table to short. Add various macros.
(sim_load): Save the bfd machine code.
(sim_create_inferior): Ditto.
(union saved_state_type): Add tbr, ibnr and ibcr registers.
Move bfd_mach to end of struct. Add regstack pointer.
(init_dsp): Don't swap contents of sh_dsp_table any more. Instead
use it directly in its own switch statement. Allocate space for 512
register banks.
(do_long_move_insn): New function.
(do_blog_insn): Ditto.
(trap): Use trap #13 and trap #14 to set ibnr and ibcr.
* gencode.c: Move movx/movy insns into separate switch statement.
(op tab): Add sh2a insns. Reject instructions that are disabled
on that chip.
(gensim_caselist): Generate default case here instead of in caller.
(gensim): Generate two separate switch statements. Call
gensim_caselist once for each (for movsxy_tab and for tab).
Add tokens for r15 and multiple regs.
(conflict_warn, warn_conflicts): Add for debugging.
* gencode.c (table): Change from char to short.
(dumptable): Change generated table from char to short.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): char to short.
(init_dsp): Compute size of sh_dsp_table.
(sim_resume): Change jump_table from char to short.
* gencode.c (expand_opcode): Simplify and reorganize.
Eliminate "shift" parameter. Eliminate "4 bits at a time"
assumption. Flatten switch statement to a single level.
Add "eeee" token for even-numbered registers.
(bton): Delete.
(fsca): Use "eeee" token.
(ppi_moves): Rename to "expand_ppi_movxy". Do the ddt
[movx/movy] expansion here, as well as the ppi expansion.
(gensim_caselist): Accept 'eeee' along with 'nnnn'.
* callback.h (struct host_callback_struct): New members ftruncate
and truncate.
gdb:
sim/common:
* callback.c (os_ftruncate, os_truncate): New functions.
(default_callback): Initialize ftruncate and truncate members.
sim/sh:
* syscall.h (SYS_truncate, SYS_ftruncate): Define.
* interp.c (trap): Add support for SYS_ftruncate and SYS_truncate.
* sim/sh/gencode.c ( tab[] ): Addition of MAC.L handler and
correction for MAC.W handler
* sim/sh/interp.c ( macl ): New Function. Implementation of
MAC.L handler.
* gencode.c (pshl): Change < to <= (shift by 16 is allowed).
Cast argument of >> to unsigned to prevent sign extension.
(psha): Change < to <= (shift by 32 is allowed).
* gencode.c: A few more fix-ups of refs and defs.
(frchg): Raise SIGILL if in double-precision mode.
(ldtlb): We don't simulate cache, so this is a no-op.
(movsxy_tab): Correct a few bit pattern errors.
* gencode.c (ppi_gensim): For a conditional ppi insn, if the
condition is false, we want to return (not break). A break
will take us to the end of the function where registers will
be updated, whereas the desired outcome is for nothing to change.
* gencode.c (op tab): Some fix-ups of refs and defs.
(ocbi, ocbp): Cache not simulated, but may cause memory fault.
(gensym_caselist): Add default case to switch statement.
(expand_ppi_code): Add default case to switch statement.
This patch fixes the gcc.dg/nest.c failures for sh-elf.
Fri Oct 11 16:22:28 2002 J"orn Rennecke <joern.rennecke@superh.com>
* interp.c (trap): Return int. Take extra parameter for address
of the trap instruction. Changed all callers.
Add case 33 for profiling.
* gencode.c (trapa): Handle trap 33 using the trap function.
Add read of vector for generic traps.
* sim-sh.h: Add enum constants for sh[1-4], sh3e, sh3?-dsp,
renumbering the sh-dsp registers to use distinct numbers.
sim/sh:
* Makefile.in (interp.o): Depend on $(srcroot)/include/gdb/sim-sh.h.
* interp.c: Include "gdb/sim-sh.h".
(sim_store_register, sim_fetch_register): Use constants defined there.
gdb:
* sh-tdep.c (sh_dsp_register_sim_regno): New function.
(sh_gdbarch_init): Use it for sh-dsp.
later inspection by the trap handler.
(count_argc): New function.
(prog_argv): Declare static.
(sim_write): Declare.
(trap): Implement argc, argnlen and argn system calls. Do not
abort on unknown system calls--simply return -1.
* syscall.h (SYS_argc, SYS_argnlen, SYS_argn): Define.
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
Add file sim-hload.c - generic load for hardware only simulators.
Review each simulators sim_open, sim_load, sim_create_inferior so that
they more closely match required behavour.
that image properties such as endianness can be checked.
More strongly document the expected behavour of each of the sim_*
interfaces.
Add default endian argument to simulator config macro
SIM_AC_OPTION_ENDIAN. Use in sim_config.
o Provide poll_quit callback to simulators
so that they can poll for SIGINT on
clueless OS's.
o Add sim_stop to simulators so that clients
can request a halt (eg gdbtk's STOP button)
Works for PPC!
o Re-arange remote-sim.c so that the
hard work is moved from gdbsim_resume()
to gdbsim_wait() (where it should be).
* interp.c (target_byte_order): Delete.
(sim_kind, myname, little_endian_p): New static locals.
(init_pointers): Use little_endian_p instead of target_byte_order.
(sim_resume): Likewise.
(sim_open): Set sim_kind, myname. Set little_endian_p from -E arg.
(sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
load file into simulator. Set start address from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
* Make-common.in (CSEARCH): Do not include the gdb directory in
the search path.
* Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE,
SIM_WARNING): Drop, requiring the simulator specific Makefile.in
to explicitly incorporate these.
* aclocal.m4 (--enable-sim-alignment); New option. Strongly
specify the alignment restrictions of the target architecture -
without this option all alignment restrictions are accomodated.
(--enable-sim-assert): New option. Conditionally compile in
assertion statements.
(--enable-sim-float): New option. Strongly specify the target's
floating point support.
(--enable-sim-hardware): New option. Specify the hardware devices
included in the simulation.
(--enable-sim-packages): New option. Specify the hardware
packages included in the simulation.
(--enable-sim-regparm): New option. Specify that parameters be
passed in registers instead of on the stack.
(--enable-sim-reserved-bits): New option. Specify that reserved
bits within an instruction are are correctly set.
(--enable-sim-smp): New option. Specify the level of SMP support
to be included in the simulator.
(--enable-sim-stdcall): New option. Specify an alternative
function call convention.
(--enable-sim-xor-endian): New option. Configure xor-endian
support used by some targets to implement bi-endian support.
scheme which is more compatible with WinGDB builds.
* configure.in: Improve comment on how to run autoconf.
* configure: Re-run autoconf to get new ../common/aclocal.m4.
* Makefile.in: Use autoconf substitution to install common
makefile fragment.
* configure: Rebuild.
* Makefile.in (INSTALL): Revert to using install.sh.
(INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL).
(INSTALL_XFORM, INSTALL_XFORM1): Restore.
(CC_FOR_BUILD): Restore.
(gencode): Build using $(CC_FOR_BUILD).
(install): Don't install in $(tooldir).
(struct save_state): Add fields for floating point registers,
FPSCR and FPUL.
(sim_resume): Add 'F' for accessing floating point registers
in the save state structure.
* gencode.c: Add sh3e opcodes.
(gensym): Define a buffer for int<->fp conversions.
First cut at simulating sh3e instructions. Basic stuff should work;
instructions using fpul and fpscr are completely untested... Sanitized
away for now (sh3e).
([r|w][bwl]at[little|big]) New functions.
(sim_resume): If GO32 check for interrupt every now
and again. Decrement PC if SIGBUS seen.
* run.c (main): Return result of simulated _exit.
* interp.c: #include "remote-sim.h".
(sim_resume): int result, new arg `siggnal'.
(sim_write): Use SIM_ADDR for type of arg `addr'.
(sim_read): Use SIM_ADDR for type of arg `addr'.
Use unsigned char * for `buffer'.
(sim_store_register): int result.
(sim_fetch_register): Ditto.
(sim_stop_reason): Renamed from sim_stop_signal. New arg `reason'.
(sim_set_pc): int result, use SIM_ADDR for type of arg `x'.
(sim_info): int result, new args `verbose', `printf_fn'.
(sim_kill): int result.
(sim_open): int result, new arg `name'.
* run.c: #include <stdio.h>
(main): Update call to sim_info.
