Add a new target method to_record_will_replay to query if there is a record
target that will replay at least one thread matching the argument PTID if it
were executed in the argument execution direction.
gdb/
* record-btrace.c ((record_btrace_will_replay): New.
(init_record_btrace_ops): Initialize to_record_will_replay.
* record-full.c ((record_full_will_replay): New.
(init_record_full_ops): Initialize to_record_will_replay.
* target-delegates.c: Regenerated.
* target.c (target_record_will_replay): New.
* target.h (struct target_ops) <to_record_will_replay>: New.
(target_record_will_replay): New.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
The record btrace target does not allow accessing memory and storing registers
while replaying. For multi-threaded applications, this prevents those
accesses also for threads that are at the end of their execution history as
long as at least one thread is replaying.
Change this to only check if the selected thread is replaying. This allows
threads that are at the end of their execution history to read and write
memory and to store registers.
Also change the error message to reflect this change.
gdb/
* record-btrace.c (record_btrace_xfer_partial)
(record_btrace_store_registers, record_btrace_prepare_to_store):
Call record_btrace_is_replaying with inferior_ptid instead of
minus_one_ptid.
(record_btrace_store_registers): Change error message.
The to_record_is_replaying target method is used to query record targets if
they are replaying. This is currently interpreted as "is any thread being
replayed".
Add a PTID argument and change the interpretation to "is any thread matching
PTID being replayed".
Change all users to pass minus_one_ptid to preserve the old meaning.
The record full target does not really support multi-threading and ignores
the PTID argument.
gdb/
* record-btrace.c (record_btrace_is_replaying): Add ptid argument.
Update users to pass minus_one_ptid.
* record-full.c (record_full_is_replaying): Add ptid argument (ignored).
* record.c (cmd_record_delete): Pass inferior_ptid to
target_record_is_replaying.
* target-delegates.c: Regenerated.
* target.c (target_record_is_replaying): Add ptid argument.
* target.h (struct target_ops) <to_record_is_replaying>: Add ptid
argument.
(target_record_is_replaying): Add ptid argument.
A thread that runs out of its execution history is stopped. We already set
stop_pc and call stop_waiting. But we do not switch to the stopped thread.
In normal_stop, we call finish_thread_state_cleanup to set a thread's running
state. In all-stop mode, we call it with minus_one_ptid; in non-stop mode, we
only call it for inferior_ptid.
If in non-stop mode normal_stop is called on behalf of a thread that is not
inferior_ptid, that other thread will still be reported as running. If it is
actually stopped it can't be resumed again.
Record targets traditionally don't support non-stop and only resume
inferior_ptid. So this has not been a problem, so far.
Switch to the eventing thread for NO_HISTORY events as preparation to support
non-stop for the record btrace target.
gdb/
* infrun.c (handle_inferior_event_1): Switch to the eventing thread
in the TARKET_WAITKIND_NO_HISTORY case.
The record btrace target runs synchronous with GDB. That is, GDB steps
resumed threads in record btrace's to_wait method. Without GDB calling
to_wait, nothing happens 'on the target'.
Check for further expected events in to_wait before reporting the current
event and mark record btrace's async event handler in async mode.
gdb/
* record-btrace.c (record_btrace_maybe_mark_async_event): New.
(record_btrace_wait): Call record_btrace_maybe_mark_async_event.
Get_current_frame uses inferior_ptid. In record_btrace_start_replaying,
we need to get the current frame of the argument thread. So far, this
has always been inferior_ptid. With non-stop, this is not guaranteed.
Temporarily set inferior_ptid to the ptid of the argument thread.
We already temporarily set the argument thread's executing flag to false.
Move both into a new function get_thread_current_frame that does the temporary
adjustments, calls get_current_frame, and restores the previous values.
gdb/
* record-btrace.c (get_thread_current_frame): New.
(record_btrace_start_replaying): Call get_thread_current_frame.
The record targets are implicitly schedlocked. They only step the current
thread and keep other threads where they are.
Change record btrace to step all requested threads in to_resume.
For maintenance and debugging, we keep the old behaviour when the target below
is not non-stop. Enable with "maint set target-non-stop on".
gdb/
* record-btrace.c (record_btrace_resume_thread): A move request
overwrites a previous move request.
(record_btrace_find_resume_thread): Removed.
(record_btrace_resume): Resume all requested threads.
Record btrace's to_wait method picks a single thread to step. When passed
minus_one_ptid, it picks the current thread. All other threads remain where
they are.
Change this to step all resumed threads together, one step at a time, until
the first thread reports an event.
We do delay reporting NO_HISTORY events until there are no other events to
report to prevent threads at the end of their execution history from starving
other threads.
We keep threads at the end of their execution history moving and replaying
until we announce their stop in to_wait. This shouldn't really be user-visible
but its a detail worth mentioning.
Since record btrace's to_resume method also picks only a single thread to
resume, there shouldn't be a difference with the current all-stop.
With non-stop or all-stop on top of non-stop, we will see differences. The
behaviour should be more natural as we're moving all threads.
gdb/
* record-btrace.c: Include vec.h.
(record_btrace_find_thread_to_move): Removed.
(btrace_step_no_resumed, btrace_step_again)
(record_btrace_stop_replaying_at_end): New.
(record_btrace_cancel_resume): Call record_btrace_stop_replaying_at_end.
(record_btrace_single_step_forward): Remove calls to
record_btrace_stop_replaying.
(record_btrace_step_thread): Do only one step for BTHR_CONT and
BTHR_RCONT. Keep threads at the end of their history moving.
(record_btrace_wait): Call record_btrace_step_thread for all threads
until one reports an event. Call record_btrace_stop_replaying_at_end
for the eventing thread.
If a single-step ended right at the end of the execution history, we forgot
to announce that. Fix it.
gdb/
* record-btrace.c (record_btrace_single_step_forward): Return
NO_HISTORY if a step brings us to the end of the execution history.
Breakpoints are only checked for BTHR_CONT and BTHR_RCONT stepping requests.
A BTHR_STEP and BTHR_RSTEP request will always report stopped without reason.
Since breakpoints are reported correctly, I assume infrun is handling this.
Move the breakpoint check into the btrace single stepping functions. This
will cause us to report breakpoint hits now also for single-step requests.
One thing to notice is that
- when executing forwards, the breakpoint is checked before 'executing'
the instruction, i.e. before moving the PC to the next instruction.
- when executing backwards, the breakpoint is checked after 'executing'
the instruction, i.e. after moving the PC to the preceding instruction
in the recorded execution.
There is code in infrun (see, for example proceed and adjust_pc_after_break)
that handles this and also depends on this behaviour.
gdb/
* record-btrace.c (record_btrace_step_thread): Move breakpoint check
to ...
(record_btrace_single_step_forward): ... here and
(record_btrace_single_step_backward): ... here.
The code for BTHR_STEP and BTHR_CONT is fairly similar. Extract the common
parts into a new function record_btrace_single_step_forward. The function
returns TARGET_WAITKIND_SPURIOUS to indicate that the single-step completed
without triggering a trap.
Same for BTHR_RSTEP and BTHR_RCONT.
gdb/
* record-btrace.c (btrace_step_spurious)
(record_btrace_single_step_forward)
(record_btrace_single_step_backward): New.
(record_btrace_step_thread): Call record_btrace_single_step_forward
and record_btrace_single_step_backward.
There are two places where record_btrace_step_thread checks for a breakpoint
at the current replay position. Move this code into its own function.
gdb/
* record-btrace.c (record_btrace_replay_at_breakpoint): New.
(record_btrace_step_thread): Call record_btrace_replay_at_breakpoint.
Add support for the to_stop target method to the btrace record target.
gdb/
* btrace.h (enum btrace_thread_flag) <BTHR_STOP>: New.
* record-btrace (record_btrace_resume_thread): Clear BTHR_STOP.
(record_btrace_find_thread_to_move): Also accept threads that have
BTHR_STOP set.
(btrace_step_stopped_on_request, record_btrace_stop): New.
(record_btrace_step_thread): Support BTHR_STOP.
(record_btrace_wait): Also clear BTHR_STOP when stopping other threads.
(init_record_btrace_ops): Initialize to_stop.
The record btrace target stops other threads in non-stop mode after stepping
the to-be-resumed thread.
The check is done on the non_stop variable. It should rather be done on
target_is_non_stop_p (). With all-stop on top of non-stop, infrun will
take care of stopping other threads.
gdb/
* record-btrace.c (record_btrace_wait): Replace non_stop check with
target_is_non_stop_p ().
Sometimes it may be of benefit to force use of the __tls_get_addr_opt
call stub even when the glibc being used during linking does not
advertise __tls_get_addr_opt.
bfd/
* elf64-ppc.h (struct ppc64_elf_params <tls_get_addr_opt>): Rename
from no_tls_get_addr_opt.
* elf64-ppc.c: Update for rename and inversion of tls_get_addr_opt.
(ppc64_elf_tls_setup): Set tls_get_addr_opt to 0 only when at
default of -1.
ld/
* emultempl/ppc64elf.em (params): Init tls_get_addr_opt field to -1.
(OPTION_TLS_GET_ADDR_OPT): Define.
(PARSE_AND_LIST_LONGOPTS): Handle --tls-get-addr-opt.
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Likewise.
* ld.texinfo: Document --tls-get-addr-optimize and
--no-tls-get-addr-optimize.
Giving linker script symbols defined outside of output sections a
section-relative value early, leads to them being used in expressions
as if they were defined inside an output section. This can mean loss
of the section VMA, and wrong results.
ld/
PR ld/18963
* ldexp.h (struct ldexp_control): Add rel_from_abs.
(ldexp_finalize_syms): Declare.
* ldexp.c (new_rel_from_abs): Keep absolute for expressions
outside of output section statements. Set rel_from_abs.
(make_abs, exp_fold_tree, exp_fold_tree_no_dot): Clear rel_from_abs.
(struct definedness_hash_entry): Add final_sec, and comment.
(update_definedness): Set final_sec.
(set_sym_sections, ldexp_finalize_syms): New functions.
* ldlang.c (lang_process): Call ldexp_finalize_syms.
ld/testsuite
PR ld/18963
* ld-scripts/pr18963.d,
* ld-scripts/pr18963.t: New test.
* ld-scripts/expr.exp: Run it.
* ld-elf/provide-hidden-2.ld: Explicitly make "dot" absolute.
* ld-mips-elf/gp-hidden.sd: Don't care about _gp section.
* ld-mips-elf/no-shared-1-n32.d: Don't care about symbol shown at
start of .data section.
* ld-mips-elf/no-shared-1-n64.d: Likewise.
* ld-mips-elf/no-shared-1-o32.d: Likewise.
This patch adds a test case for tracepoints with a condition expression.
Each case will test a condition against the number of frames that should
have been traced. Some of these tests fail on x86_64 and others on
i386, which have been marked as known failures for now, see PR/18955.
gdb/testsuite/ChangeLog:
2015-09-17 Pierre Langlois <pierre.langlois@arm.com>
Yao Qi <yao.qi@linaro.org>
* gdb.trace/trace-condition.c: New file.
* gdb.trace/trace-condition.exp: New file.
This patch fixes the argument passed to compiled_cond. It should be
regs buffer instead of tracepoint_hit_ctx. Test case is added as
well for testing compiled-cond.
gdb/gdbserver/ChangeLog
2015-09-16 Wei-cheng Wang <cole945@gmail.com>
* tracepoint.c (eval_result_type): Change prototype.
(condition_true_at_tracepoint): Fix argument to compiled_cond.
gdb/testsuite/ChangeLog
2015-09-16 Wei-cheng Wang <cole945@gmail.com>
* gdb.trace/ftrace.exp: (test_ftrace_condition) New function
for testing bytecode compilation.
On software single-step targets that don't support displaced stepping,
threads keep hitting each other's single-step breakpoints, and then
GDB needs to pause all threads to step past those. The end result is
that progress in the main thread will be slower and it may take a bit
longer for the signal to be queued. This patch bumps the timeout on
such targets.
gdb/testsuite/ChangeLog:
2015-09-16 Pedro Alves <palves@redhat.com>
Sandra Loosemore <sandra@codesourcery.com>
* gdb.threads/non-stop-fair-events.c (timeout): New global.
(SECONDS): Redefine.
(main): Call pthread_kill and alarm early.
* gdb.threads/non-stop-fair-events.exp: Probe displaced stepping
support.
(test): If the target can't hardware step and doesn't support
displaced stepping, increase the timeout.
If we enable infrun debug running this test, it quickly fails with a
full expect buffer. That can be simply handled with a couple
exp_continues. As it's annoying to hack this every time we need to
debug the test, this patch adds bits to enable debugging support
easily, with a one-line change.
And then, if any iteration of the test fails, we end up with a long
cascade of time outs. Just bail out when we see the first fail.
gdb/testsuite/
2015-09-16 Pedro Alves <palves@redhat.com>
* gdb.threads/non-stop-fair-events.exp (gdb_test_no_anchor)
(enable_debug): New procedures.
(test): Use them. Bail out if waiting for threads fails.
(top level): Bail out if a test fails.
This patch adds gdb.asm/aarch64.inc, so asm-source.exp isn't skipped
on aarch64 any more.
gdb/testsuite:
2015-09-16 Yao Qi <yao.qi@linaro.org>
* gdb.asm/asm-source.exp: Set asm-arch for
aarch64*-*-* target.
* gdb.asm/aarch64.inc: New file.
I chose insertion sort since relocs are mostly sorted, but there is a
common case we can handle better; A run of relocs put out of order
due to not linking input files in order.
PR 18867
* elflink.c (elf_link_adjust_relocs): Modify insertion sort to
insert a run. Return status in case of malloc failure.
Adjust callers.
This change is relevant only for standard DWARF (as opposed to the GNAT
encodings extensions): at the time of writing it only makes a difference
with GCC patches that are to be integrated: see the patch series
submission at
<https://gcc.gnu.org/ml/gcc-patches/2015-07/msg01353.html>.
Given the following Ada declarations:
subtype Small_Int is Natural range 0 .. 100;
type R_Type (L : Small_Int := 0) is record
S : String (1 .. L);
end record;
type A_Type is array (Natural range <>) of R_Type;
A : A_Type := (1 => (L => 0, S => ""),
2 => (L => 2, S => "ab"));
Before this change, we would get the following GDB session:
(gdb) ptype a
type = array (1 .. 2) of foo.r_type <packed: 838-bit elements>
This is wrong: "a" is not a packed array. This output comes from the
fact that, because R_Type has a dynamic size (with a maximum), the
compiler has to describe in the debugging information the size allocated
for each array element (i.e. the stride, in DWARF parlance: see
DW_AT_byte_stride). Ada type printing currently assumes that arrays
with a stride are packed, hence the above output.
In practice, GNAT never performs bit-packing for arrays that contain
variable-sized elements. Leveraging this fact, this patch enhances type
printing so that ptype does not pretend that arrays are packed when they
have a stride and they contain dynamic elements. After this change, we
get the following expected output:
(gdb) ptype a
type = array (1 .. 2) of foo.r_type
gdb/ChangeLog:
* ada-typeprint.c (print_array_type): Do not describe arrays as
packed when they embed dynamic elements.
gdb/testsuite/ChangeLog:
* gdb.ada/array_of_variable_length.exp: New testcase.
* gdb.ada/array_of_variable_length/foo.adb: New file.
* gdb.ada/array_of_variable_length/pck.adb: New file.
* gdb.ada/array_of_variable_length/pck.ads: New file.
Tested on x86_64-linux, no regression.
clang names the local variable t_structs_a.buf.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.exp (do_function_calls): Handle clang naming
of function static local variable.
2015-09-15 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (elf_xtensa_be_plt_entry)
(elf_xtensa_le_plt_entry): Emit 'entry' instruction only for
windowed ABI.
(elf_xtensa_create_plt_entry): Generate 'l32r' offsets and fix
up instructions according to ABI.
The previous manual change was wrong. The vfork parent thread ID
should be reported with the usual "thread" magic register:
Sending packet: $vCont;c:p7260.7260#1e...Packet received: OK
- Notification received: Stop:T05vforkdone:;
+ Notification received: Stop:T05vforkdone:;thread:p7260.7260
^^^^^^^^^^^^^^^^^
This is already how the parent is reported in the vfork/fork events,
and is actually what the fix made gdbserver do. Following the
documentation change, the event would have been reported like this
instead:
Notification received: Stop:T05vforkdone:p7260.7260
gdb/doc/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
PR remote/18965
* gdb.texinfo (Stop Reply Packets): Revert previous change to
the vforkdone description.
ppc64le loses control when stepping between two PLT-called functions inside
a shared library:
29 shlib_second (); /* first-hit */^M
(gdb) PASS: gdb.base/solib-intra-step.exp: first-hit
step^M
^M
Program received signal SIGABRT, Aborted.^M
0x00003fffb7cbe578 in __GI_raise (sig=<optimized out>) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56^M
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);^M
(gdb) FAIL: gdb.base/solib-intra-step.exp: second-hit
->
29 shlib_second (); /* first-hit */^M
(gdb) PASS: gdb.base/solib-intra-step.exp: first-hit
step^M
shlib_second () at ./gdb.base/solib-intra-step-lib.c:23^M
23 abort (); /* second-hit */^M
(gdb) PASS: gdb.base/solib-intra-step.exp: second-hit
This is because gdbarch_skip_trampoline_code() will resolve the final function
as shlib_second+0 and place there the breakpoint, but ld.so will jump after
the breakpoint - at shlib_second+8 - as it is ELFv2 local symbol optimization:
Dump of assembler code for function shlib_second:
0x0000000000000804 <+0>: addis r2,r12,2
0x0000000000000808 <+4>: addi r2,r2,30668
0x000000000000080c <+8>: mflr r0
Currently gdbarch_skip_entrypoint() has been called in skip_prologue_sal() and
fill_in_stop_func() but that is not enough. I believe
gdbarch_skip_entrypoint() should be called after every
gdbarch_skip_trampoline_code().
gdb/ChangeLog
2015-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* linespec.c (minsym_found): Call gdbarch_skip_entrypoint.
* ppc64-tdep.c (ppc64_skip_trampoline_code): Rename to ...
(ppc64_skip_trampoline_code_1): ... here.
(ppc64_skip_trampoline_code): New wrapper function.
* symtab.c (find_function_start_sal): Call gdbarch_skip_entrypoint.
gdb/testsuite/ChangeLog
2015-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.opt/solib-intra-step-lib.c: New file.
* gdb.opt/solib-intra-step-main.c: New file.
* gdb.opt/solib-intra-step.exp: New file.
gdb/ChangeLog -> gdb/gdbserver/ChangeLog
2015-09-15 Pedro Alves <palves@redhat.com>
PR remote/18965
* remote-utils.c (prepare_resume_reply): Merge
TARGET_WAITKIND_VFORK_DONE switch case with the
TARGET_WAITKIND_FORKED case.
The vforkdone stop reply misses indicating the thread ID of the vfork
parent which the event relates to:
@cindex vfork events, remote reply
@item vfork
The packet indicates that @code{vfork} was called, and @var{r}
is the thread ID of the new child process. Refer to
@ref{thread-id syntax} for the format of the @var{thread-id}
field. This packet is only applicable to targets that support
vfork events.
@cindex vforkdone events, remote reply
@item vforkdone
The packet indicates that a child process created by a vfork
has either called @code{exec} or terminated, so that the
address spaces of the parent and child process are no longer
shared. The @var{r} part is ignored. This packet is only
applicable to targets that support vforkdone events.
Unfortunately, this is not just a documentation issue. GDBserver
is really not specifying the thread ID. I noticed because
in non-stop mode, gdb complains:
[Thread 6089.6089] #1 stopped.
#0 0x0000003615a011f0 in ?? ()
0x0000003615a011f0 in ?? ()
(gdb) set debug remote 1
(gdb) c
Continuing.
Sending packet: $QPassSignals:e;10;14;17;1a;1b;1c;21;24;25;2c;4c;#5f...Packet received: OK
Sending packet: $vCont;c:p17c9.17c9#88...Packet received: OK
Notification received: Stop:T05vfork:p17ce.17ce;06:40d7ffffff7f0000;07:30d7ffffff7f0000;10:e4c9eb1536000000;thread:p17c9.17c9;core:2;
Sending packet: $vStopped#55...Packet received: OK
Sending packet: $D;17ce#af...Packet received: OK
Sending packet: $vCont;c:p17c9.17c9#88...Packet received: OK
Notification received: Stop:T05vforkdone:;
No process or thread specified in stop reply: T05vforkdone:;
(gdb)
This is not non-stop-mode-specific, however. Consider e.g., that in
all-stop, you may be debugging more than one process at the same time.
You continue, and both processes vfork. So when you next get a
T05vforkdone, there's no way to tell which of the parent processes is
done with the vfork.
Tests will be added later.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
PR remote/18965
* remote-utils.c (prepare_resume_reply): Merge
TARGET_WAITKIND_VFORK_DONE switch case with the
TARGET_WAITKIND_FORKED case.
gdb/doc/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
PR remote/18965
* gdb.texinfo (Stop Reply Packets): Explain that vforkdone's 'r'
part indicates the thread ID of the parent process.
gdb.threads/non-ldr-exc-3.exp is sometimes failing like this:
[Switching to Thread 6831.6832]
Breakpoint 2, thread_execler (arg=0x0) at /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/non-ldr-exc-3.c:41
41 if (execl (image, image, argv1, NULL) == -1) /* break-here */
PASS: gdb.threads/non-ldr-exc-3.exp: lock-sched=on,non-stop=off: continue to breakpoint
(gdb) set scheduler-locking on
(gdb) FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched=on,non-stop=off: set scheduler-locking on
The problem is that the gdb_test_multiple is missing the prompt
anchor. The problem was introduced by 2fd33e9448. This reverts the
hunk that introduced the problem, reverting back to
gdb_continue_to_breakpoint.
gdb/testsuite/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
* gdb.threads/non-ldr-exc-3.exp (do_test): Use
gdb_continue_to_breakpoint instead of gdb_test_multiple.
Nowadays, GDB only knows whether architecture supports hardware single
step or software single step (through gdbarch hook software_single_step),
and for a given instruction or instruction sequence, GDB knows how to
do single step (hardware or software). However, GDB doesn't know whether
the target supports hardware single step. It is possible that the
architecture doesn't support hardware single step, such as arm, but
the target supports, such as simulator. This was discussed in this
thread https://www.sourceware.org/ml/gdb/2009-12/msg00033.html before.
I encounter this problem for aarch64 multi-arch support. When aarch64
debugs arm program, gdbarch is arm, so software single step is still
used. However, the underneath linux kernel does support hardware
single step, so IWBN to use it.
This patch is to add a new target_ops hook to_can_do_single_step, and
only use it in arm_linux_software_single_step to decide whether or not
to use hardware single step. On the native aarch64 linux target, 1 is
returned. On other targets, -1 is returned. On the remote target, if
the target supports s and S actions in the vCont? reply, then target
can do single step. However, old GDBserver will send s and S in the
reply to vCont?, which will confuse new GDB. For example, old GDBserver
on arm-linux will send s and S in the reply to vCont?, but it doesn't
support hardware single step. On the other hand, new GDBserver, on
arm-linux for example, will not send s and S in the reply to vCont?,
but old GDB thinks it doesn't support vCont packet at all. In order
to address this problem, I add a new qSupported feature vContSupported,
which indicates GDB wants to know the supported actions in the reply
to vCont?, and qSupported response contains vContSupported if the
stub is able tell supported vCont actions in the reply of vCont?.
If the patched GDB talks with patched GDBserver on x86, the RSP traffic
is like this:
-> $qSupported:...+;vContSupported+
<- ...+;vContSupported+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
then, GDB knows the stub can do single step, and may stop using software
single step even the architecture doesn't support hardware single step.
If the patched GDB talks with patched GDBserver on arm, the last vCont?
reply will become:
<- vCont;c;C;t
GDB thinks the target doesn't support single step, so it will use software
single step.
If the patched GDB talks with unpatched GDBserver, the RSP traffic is like
this:
-> $qSupported:...+;vContSupported+
<- ...+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
although GDBserver returns s and S, GDB still thinks GDBserver may not
support single step because it doesn't support vContSupported.
If the unpatched GDB talks with patched GDBserver on x86, the RSP traffic
is like:
-> $qSupported:...+;
<- ...+;vContSupported+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
Since GDB doesn't sent vContSupported in the qSupported feature, GDBserver
sends s and S regardless of the support of hardware single step.
gdb:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_can_do_single_step): New
function.
(_initialize_aarch64_linux_nat): Install it to to_can_do_single_step.
* arm-linux-tdep.c (arm_linux_software_single_step): Return 0
if target_can_do_single_step returns 1.
* remote.c (struct vCont_action_support) <s, S>: New fields.
(PACKET_vContSupported): New enum.
(remote_protocol_features): New element for vContSupported.
(remote_query_supported): Append "vContSupported+".
(remote_vcont_probe): Remove support_s and support_S, use
rs->supports_vCont.s and rs->supports_vCont.S instead. Disable
vCont packet if c and C actions are not supported.
(remote_can_do_single_step): New function.
(init_remote_ops): Install it to to_can_do_single_step.
(_initialize_remote): Call add_packet_config_cmd.
* target.h (struct target_ops) <to_can_do_single_step>: New field.
(target_can_do_single_step): New macro.
* target-delegates.c: Re-generated.
gdb/gdbserver:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* server.c (vCont_supported): New global variable.
(handle_query): Set vCont_supported to 1 if "vContSupported+"
matches. Append ";vContSupported+" to own_buf.
(handle_v_requests): Append ";s;S" to own_buf if target supports
hardware single step or vCont_supported is false.
(capture_main): Set vCont_supported to zero.
gdb/doc:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (General Query Packets): Add vContSupported to
tables of 'gdbfeatures' and 'stub features' supported in the
qSupported packet, as well as to the list containing stub
feature details.
In my patch https://sourceware.org/ml/gdb-patches/2015-04/msg01110.html
a new target_ops hook supports_conditional_breakpoints was added to
disable conditional breakpoints if target doesn't have hardware single
step. This patch is to generalize this hook from
supports_conditional_breakpoints to supports_hardware_single_step,
so that the following patch can use it.
gdb/gdbserver:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_supports_conditional_breakpoints): Rename
it to ...
(linux_supports_hardware_single_step): ... New function.
(linux_target_ops): Update.
* lynx-low.c (lynx_target_ops): Set field
supports_hardware_single_step to target_can_do_hardware_single_step.
* nto-low.c (nto_target_ops): Likewise.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* target.c (target_can_do_hardware_single_step): New function.
* target.h (struct target_ops) <supports_conditional_breakpoints>:
Remove. <supports_hardware_single_step>: New field.
(target_supports_conditional_breakpoints): Remove.
(target_supports_hardware_single_step): New macro.
(target_can_do_hardware_single_step): Declare.
* server.c (handle_query): Use target_supports_hardware_single_step
instead of target_supports_conditional_breakpoints.
This patch is to fixup the siginfo_t when aarch64 gdb or gdbserver
read from or write to the arm inferior. It is to convert the
"struct siginfo_t" between aarch64 and arm, which is quite mechanical.
gdb/gdbserver:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_linux_siginfo_fixup): New
function.
(struct linux_target_ops the_low_target): Install
aarch64_linux_siginfo_fixup.
gdb:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_siginfo_fixup): New function.
(_initialize_aarch64_linux_nat): Call linux_nat_set_siginfo_fixup.
* nat/aarch64-linux.c (aarch64_compat_siginfo_from_siginfo):
New function.
(aarch64_siginfo_from_compat_siginfo): New function.
* nat/aarch64-linux.h: Include signal.h.
(compat_int_t, compat_uptr_t, compat_time_t): Typedef.
(compat_timer_t, compat_clock_t): Likewise.
(struct compat_timeval): New.
(union compat_sigval): New.
(struct compat_siginfo): New.
(cpt_si_pid, cpt_si_uid, cpt_si_timerid): New macros.
(cpt_si_overrun, cpt_si_status, cpt_si_utime): Likewise.
(cpt_si_stime, cpt_si_ptr, cpt_si_addr): Likewise.
(cpt_si_band, cpt_si_fd): Likewise.
Fix it so that it's compatible with the kernel and other FDPIC targets.
* elf32-sh.c (sh_elf_relocate_section): Set EF_SH_PIC flag
instead of clearing it on cross-section relocations.
(sh_elf_merge_private_data): Clear EF_SH_PIC flag by default.
This patch, relative to a tree with
https://sourceware.org/ml/gdb-patches/2015-08/msg00295.html, fixes
issues/crashes that trigger if something unexpected happens during a
hook-stop.
E.g., if the inferior disappears while running the hook-stop, we hit
failed assertions:
(gdb) define hook-stop
Type commands for definition of "hook-stop".
End with a line saying just "end".
>kill
>end
(gdb) si
Kill the program being debugged? (y or n) [answered Y; input not from terminal]
/home/pedro/gdb/mygit/build/../src/gdb/thread.c:88: internal-error: inferior_thread: Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
I noticed that if a hook-stop issues a synchronous execution command,
we print the same stop event twice:
(gdb) define hook-stop
Type commands for definition of "hook-stop".
End with a line saying just "end".
>si
>end
(gdb) si
0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< once
0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< twice
(gdb)
In MI:
*stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0"
*stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0"
(gdb)
The fix has GDB stop processing the event if the context changed. I
don't expect people to be doing crazy things from the hook-stop.
E.g., it gives me headaches to try to come up a proper behavior for
handling a thread change from a hook-stop... (E.g., imagine the
hook-stop does thread N; step, with scheduler-locing on). I think the
most important bit here is preventing crashes.
The patch adds a new hook-stop.exp test that covers the above and also
merges in the old hook-stop-continue.exp and hook-stop-frame.exp into
the same framework.
gdb/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* infrun.c (current_stop_id): New global.
(get_stop_id, new_stop_id): New functions.
(fetch_inferior_event): Handle normal_stop proceeding the target.
(struct stop_context): New.
(save_stop_context, release_stop_context_cleanup)
(stop_context_changed): New functions.
(normal_stop): Return true if the hook-stop changes the stop
context.
* infrun.h (get_stop_id): Declare.
(normal_stop): Now returns int. Add documentation.
gdb/testsuite/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* gdb.base/hook-stop-continue.c: Delete.
* gdb.base/hook-stop-continue.exp: Delete.
* gdb.base/hook-stop-frame.c: Delete.
* gdb.base/hook-stop-frame.exp: Delete.
* gdb.base/hook-stop.c: New file.
* gdb.base/hook-stop.exp: New file.
This change is relevant only for standard DWARF (as opposed to the GNAT
encodings extensions): at the time of writing it only makes a difference
with GCC patches that are to be integrated: see in particular
<https://gcc.gnu.org/ml/gcc-patches/2015-07/msg01364.html>.
Given the following Ada declarations:
type Small is mod 2 ** 6;
type Array_Type is array (0 .. 9) of Small
with Pack;
type Array_Access is access all Array_Type;
A : aliased Array_Type := (1, 2, 3, 4, 5, 6, 7, 8, 9, 10);
AA : constant Array_Type := A'Access;
Before this change, we would get the following GDB session:
(gdb) print aa.all(2)
$1 = 3
(gdb) print aa(2)
$2 = 16
This is wrong: both expression should yield the same value: 3. The
problem is simply that the routine which handles accesses to arrays lack
general handling for packed arrays. After this patch, we have the
expected output:
(gdb) print aa.all(2)
$1 = 3
(gdb) print aa(2)
$2 = 3
gdb/ChangeLog:
* ada-lang.c (ada_value_ptr_subscript): Update the heading
comment. Handle packed arrays.
gdb/testsuite/ChangeLog:
* gdb.ada/access_to_packed_array.exp: New testcase.
* gdb.ada/access_to_packed_array/foo.adb: New file.
* gdb.ada/access_to_packed_array/pack.adb: New file.
* gdb.ada/access_to_packed_array/pack.ads: New file.
Tested on x86_64-linux, no regression.
Commit fbea99ea8a added this to both the "Changes in GDB 7.10" and
"Changes since GDB 7.10" sections by mistake.
gdb/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* NEWS (Changes in GDB 7.10, New commands>: Remove duplicate
mention of maint set/show target-non-stop.
