FreeBSD recently added two additional ELF auxiliary vectors. FreeBSD's
AT_HWCAP uses a different number compared to AT_HWCAP on Linux as the
numerical value was already in use for a different vector on FreeBSD.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_EHDRFLAGS, AT_FREEBSD_HWCAP): Define.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_EHDRFLAGS and
AT_HWCAP.
PR 22133
* config/tc-msp430.c (parse_exp): Skip an 'h' suffix to constant
expressions.
(msp430_srcoperand): Check that the entire text was parsed by
parse_exp.
(msp430_operands): Likewise.
* testsuite/gas/msp430/pr22133.s: New test file.
* testsuite/gas/msp430/pr22133.d: New test driver.
* testsuite/gas/msp430/pr22133.s: Expected error output.
* testsuite/gas/msp430/msp430.exp: Run the new test.
readelf.c:decode_arm_unwind has a variable res that is used as a
return value, with FALSE meaning unsuccessful and TRUE meaning
successful. This is initialized to FALSE (and then various code in
the function sets it to FALSE again on error), meaning that when the
function is successful, if it reaches returning res is still returns
FALSE, resulting eventually in exit status 1 from readelf without any
error message to indicate an error.
This patch fixes the initialization to use TRUE, so avoiding those
spurious errors. I don't have a self-contained test for this issue;
it was observed as many prelink tests failing without the patch and
passing with it.
* readelf.c (decode_arm_unwind): Initialize res to TRUE.
Dump dynamic relocation info to the map file when generating dynamic
relocation in read-only section relocations if -Map is used.
* elf32-tilepro.c (readonly_dynrelocs): Dump dynamic relocation
in read-only section with minfo.
(tilepro_elf_size_dynamic_sections): Likewise.
* elfxx-tilegx.c (readonly_dynrelocs): Likewise.
(tilegx_elf_size_dynamic_sections): Likewise.
Pointer comparisons have traps for the unwary. After adding a large
unknown value to "start", the test "start < end" depends on where
"start" is originally in memory.
PR 22239
* dwarf.c (read_cie): Don't compare "start" and "end" pointers
after adding a possibly wild length to "start", compare the length
to the difference of the pointers instead. Remove now redundant
"negative" length test.
A downside to the 2017-10-04 PR22245 fix is that bfd_set_error can now
silently accept invalid errors if/when someone passes the a value of
the wrong enumeration type, which previously would be caught by the
-Wenum-conversion warning.
PR 22245
* bfd.c (bfd_set_error): Revert 2017-10-04 change. Remove
ellipsis parameter. Split out bfd_error_on_input code to..
(bfd_set_input_error): .. New function.
* archive.c (_bfd_write_archive_contents): Use bfd_set_input_error.
* vms-lib.c (_bfd_vms_lib_write_archive_contents): Likewise.
* bfd-in2.h: Regenerate.
This fixes a wart I've known about for years, but haven't done
anything about because BFD treats relocation sections as an adjunct to
the section they relocate. SHF_GROUP on the section thus implicitly
applies to its relocation section(s), but it is an error that the
reloc sections aren't part of the group.
Like many patches to gas, this wasn't as straightforward as it could
be due to a number of backends, i386, cr16 and others, removing relocs
in tc_get_reloc rather than marking them as "done" earlier in
md_apply_reloc. So it isn't possible for the group support to
reliably detect the presence of relocs by looking at fixups earlier
than write_relocs. However the group support needs to create
signature symbols, and that must be done before the symbol table is
frozen, before write_relocs. So split off the group sizing from
elf_adjust_symtab and put it in elf_frob_file_after_relocs.
bfd/
PR 21167
* elf.c (_bfd_elf_setup_sections): Don't trim reloc sections from
groups.
(_bfd_elf_init_reloc_shdr): Pass sec_hdr, use it to copy SHF_GROUP
flag from section.
(elf_fake_sections): Adjust calls. Exit immediately on failure.
(bfd_elf_set_group_contents): Add associated reloc section indices
to group contents
gas/
PR 21167
* config/obj-elf.c (struct group_list): Delete elt_count.
(groups): New static.
(build_group_lists): Don't count elements.
(elf_adjust_symtab): Use groups rather than auto list. Set up
pointer from group member to SHT_GROUP section. Don't size
SHT_GROUP section or clean up here..
(elf_frob_file_after_relocs): ..do so here instead.
* testsuite/gas/arc/jli-1.d,
* testsuite/gas/elf/groupautob.d,
* testsuite/gas/mips/compact-eh-eb-2.d,
* testsuite/gas/mips/compact-eh-eb-5.d,
* testsuite/gas/mips/compact-eh-el-2.d,
* testsuite/gas/mips/compact-eh-el-5.d: Adjust.
ld/
PR 21167
* testsuite/ld-elf/group9b.d: Adjust for relocs included in group.
When debugging two inferiors (or more) against gdbserver, and the
inferiors have different architectures, such as e.g., on x86_64
GNU/Linux and one inferior is 64-bit while the other is 32-bit, then
GDB can get confused with the different architectures in a couple
spots.
In both cases I ran into, GDB incorrectly ended up using the
architecture of whatever happens to be the selected inferior instead
of the architecture of some other given inferior:
#1 - When parsing the expedited registers in stop replies.
#2 - In the default implementation of the target_thread_architecture
target method.
These resulted in instances of the infamous "Remote 'g' packet reply
is too long" error. For example, with the test added in this commit,
we get:
~~~
Continuing.
Remote 'g' packet reply is too long (expected 440 bytes, got 816 bytes): ad064000000000000[snip]
(gdb) FAIL: gdb.multi/multi-arch.exp: inf1 event with inf2 selected: continue to hello_loop
c
Continuing.
Truncated register 50 in remote 'g' packet
(gdb) PASS: gdb.multi/multi-arch.exp: inf2 event with inf1 selected: c
~~~
This commit fixes that.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* remote.c (get_remote_arch_state): New 'gdbarch' parameter. Use
it instead of target_gdbarch.
(get_remote_state, get_remote_packet_size): Adjust
get_remote_arch_state calls, passing down target_gdbarch
explicitly.
(packet_reg_from_regnum, packet_reg_from_pnum): New parameter
'gdbarch' and use it instead of target_gdbarch.
(get_memory_packet_size): Adjust get_remote_arch_state calls,
passing down target_gdbarch explicitly.
(struct stop_reply) <arch>: New field.
(remote_parse_stop_reply): Use the stopped thread's architecture,
not the current inferior's. Save the architecture in the
stop_reply.
(process_stop_reply): Use the stop reply's architecture.
(process_g_packet, remote_fetch_registers)
(remote_prepare_to_store, store_registers_using_G)
(remote_store_registers): Adjust get_remote_arch_state calls,
using the regcache's architecture.
(remote_get_trace_status): Adjust get_remote_arch_state calls,
passing down target_gdbarch explicitly.
* spu-multiarch.c (spu_thread_architecture): Defer to the target
beneath instead of calling target_gdbarch.
* target.c (default_thread_architecture): Use the specified
inferior's architecture, instead of the current inferior's
architecture (via target_gdbarch).
gdb/testsuite/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* gdb.multi/hangout.c: Include <unistd.h>.
(hangout_loop): New function.
(main): Call alarm. Call hangout_loop in a loop.
* gdb.multi/hello.c: Include <unistd.h>.
(hello_loop): New function.
(main): Call alarm. Call hangout_loop in a loop.
* gdb.multi/multi-arch.exp: Test running to a breakpoint one
inferior with the other selected.
A following patch will change the default target_thread_architecture
method, like this:
struct gdbarch *
default_thread_architecture (struct target_ops *ops, ptid_t ptid)
{
- return target_gdbarch ();
+ inferior *inf = find_inferior_ptid (ptid);
+ gdb_assert (inf != NULL);
+ return inf->gdbarch;
}
This is because target_gdbarch is really just
current_inferior()->gdbarch, and it's wrong to return that
architecture when the inferior of the passed in PTID is NOT the
current inferior -- the inferior for PTID may be running a different
architecture. E.g., a mix of 64-bit and 32-bit inferiors in the same
debug session.
Doing that change above however exposes a problem in "maint print
registers", caught be the testsuite:
-PASS: gdb.base/maint.exp: maint print registers
+FAIL: gdb.base/maint.exp: maint print registers (GDB internal error)
...
gdb/inferior.c:309: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
The call stack looks like this:
#0 0x000000000068b707 in internal_error(char const*, int, char const*, ...) (file=0xa9b958 "gdb/inferior.c", line=309, fmt=0xa9b8e0 "%s: Assertion `%s' failed.") at gdb/common/errors.c:54
#1 0x00000000006e1c40 in find_inferior_pid(int) (pid=0) at gdb/inferior.c:309
#2 0x00000000006e1c8d in find_inferior_ptid(ptid_t) (ptid=...) at gdb/inferior.c:323
#3 0x00000000007c18dc in default_thread_architecture(target_ops*, ptid_t) (ops=0xf86d60 <dummy_target>, ptid=...)
at gdb/target.c:3134
#4 0x00000000007b5414 in delegate_thread_architecture(target_ops*, ptid_t) (self=0xf86d60 <dummy_target>, arg1=...)
at gdb/target-delegates.c:2527
#5 0x00000000007647b3 in get_thread_regcache(ptid_t) (ptid=...) at gdb/regcache.c:466
#6 0x00000000007647ff in get_current_regcache() () at gdb/regcache.c:475
#7 0x0000000000767495 in regcache_print(char const*, regcache_dump_what) (args=0x0, what_to_dump=regcache_dump_none)
at gdb/regcache.c:1599
#8 0x0000000000767550 in maintenance_print_registers(char const*, int) (args=0x0, from_tty=1)
at gdb/regcache.c:1613
I.e., the test does "maint print registers" while the inferior is not
running yet. This is expected to work, and there's already a hack in
get_thread_arch_regcache to make it work.
Instead of pilling on hacks in the internal of regcache and
target_ops, this commit moves the null_ptid special casing to where it
belongs -- higher up in the call chain in the implementation of "maint
print registers" & co directly.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* regcache.c (get_thread_arch_regcache): Remove null_ptid special
case.
(regcache_print): Handle !target_has_registers here instead.
A following patch will remove this hack from within regcache's
implementation:
struct regcache *
get_thread_arch_regcache (ptid_t ptid, struct gdbarch *gdbarch)
{
struct address_space *aspace;
/* For the benefit of "maint print registers" & co when debugging an
executable, allow dumping the regcache even when there is no
thread selected (target_thread_address_space internal-errors if
no address space is found). Note that normal user commands will
fail higher up on the call stack due to no
target_has_registers. */
aspace = (ptid_equal (null_ptid, ptid)
? NULL
: target_thread_address_space (ptid));
i.e., it'll no longer be possible to try to build a regcache for
null_ptid. That change alone would regress the gdbarch self tests
though, causing this:
(gdb) maintenance selftest
[...]
Running selftest register_to_value.
src/gdb/inferior.c:309: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.gdb/unittest.exp: maintenance selftest (GDB internal error)
The problem is that the way the mocking environment for those unit
tests is written is a bit fragile: it creates a special purpose
regcache (and sentinel's frame), using whatever is the current
inferior_ptid (usually null_ptid), and assumes get_current_regcache
will find that in the regcache::current_regcache list.
This commit changes the way the mock environment is created. It
eliminates the special regcache and frame and instead creates a fuller
mock environment, with a custom mock target_ops, and then a mock
inferior and thread "running" on that target.
If there's already a running target when you type "maint selftest",
then we error out, instead of pushing a new target on top of the
existing one (and thus killing the debug session). This results in:
(gdb) maint selftest
(...)
Self test failed: arch i386: target already pushed
Self test failed: arch i386:x86-64: target already pushed
Self test failed: arch i386:x64-32: target already pushed
Self test failed: arch i8086: target already pushed
Self test failed: arch i386:intel: target already pushed
Self test failed: arch i386:x86-64:intel: target already pushed
Self test failed: arch i386:x64-32:intel: target already pushed
Self test failed: arch i386:nacl: target already pushed
Self test failed: arch i386:x86-64:nacl: target already pushed
Self test failed: arch i386:x64-32:nacl: target already pushed
Self test failed: self-test failed at /home/pedro/gdb/mygit/src/gdb/selftest-arch.c:86
(...)
Ran 19 unit tests, 1 failed
I think that's OK, because self tests are really meant to be run from
a clean state right after GDB is started. I'm adding that erroring
out just as safe measure just in case someone types "maint selftest"
on the command line while already debugging something (as I've done
it).
(In my multi-target branch, where this patch originated from, we don't
actually need to error out, because there each inferior has its own
target stack).
Also, note that the current code was doing:
current_inferior()->gdbarch = gdbarch;
without taking care to restore the previous gdbarch. This means that
GDB's state was being left inconsistent after running the self tests,
further supporting the point that there's probably not much
expectation that mixing "maint selftests" and regular debugging in the
same GDB invocation really works. This patch fixes that, regardless.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* frame.c (create_test_frame): Delete.
* frame.h (create_test_frame): Delete.
* gdbarch-selftests.c: Include gdbthread.h and target.h.
(class regcache_test): Delete.
(test_target_has_registers, test_target_has_stack)
(test_target_has_memory, test_target_prepare_to_store)
(test_target_store_registers): New functions.
(test_target_ops): New class.
(register_to_value_test): Error out if there's already a
process_stratum (or higher) target pushed. Create a fuller mock
environment, with mock target_ops, inferior, address space, thread
and inferior_ptid.
* progspace.c (struct address_space): Move to ...
* progspace.h (struct address_space): ... here.
* regcache.h (regcache::~regcache, regcache::raw_write)
[GDB_SELF_TEST]: No longer virtual.
New in v3:
- Replace use_gdb_stub with can_spawn_for_attach.
- Call kill_wait_spawned_process on spawn_ids.
Commit
Use std::set in mi-main.c
52f9abe4c7
changed the logic of the "-list-thread-groups --available" by mistake
when a pid is passed. It prints all the processes except the one
specified by the given pid. The correct behavior is to only print the
process corresponding to that pid. this patch fixes that and adds a test.
gdb/ChangeLog:
* mi/mi-main.c (list_available_thread_groups): Reverse filter logic.
gdb/testsuite/ChangeLog:
* gdb.mi/list-thread-groups-available.exp: New file.
* gdb.mi/list-thread-groups-available.c: New file.
I tried building GDB with TRY/CATCH mapped to raw C++ try/catch (by
defining GDB_XCPT to GDB_XCPT_RAW_TRY in
gdb/common/common-exceptions.h), and that caught a case of code
written between try and catch. This commit fixes it.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Move code
out of 'between TRY and CATCH'.
(Adding missing ChangeLog entry)
While we still have cleanups (i.e., make_cleanup & co), we must be
sure to add END_CATCH at the end of a TRY/CATCH/END_CATCH construct.
However, it's currently too easy to miss adding the END_CATCH, because
the code compiles anyway without it. I realized this when I noticed
that another patch I was working on missed several adding END_CATCH in
several new TRY/CATCH uses.
This commit fixes that by making TRY open a new scope that is only
closed by END_CATCH. This way, if you forget to add the END_CATCH,
then compilation fails due to the unbalanced curly braces.
This caught a couple places where we were missing END_CATCH in current
master, also fixed by the patch.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (complete_command): Add missing END_CATCH.
* common/common-exceptions.h (TRY): Open an outermost scope.
Expand intro comment.
(CATCH): Reindent.
(END_CATCH): Close the outermost scope.
* completer.c (complete_line_internal): Add missing END_CATCH.
While we still have cleanups (i.e., make_cleanup & co), we must be
sure to add END_CATCH at the end of a TRY/CATCH/END_CATCH construct.
However, it's currently too easy to miss adding the END_CATCH, because
the code compiles anyway without it. I realized this when I noticed
that another patch I was working on missed several adding END_CATCH in
several new TRY/CATCH uses.
This commit fixes that by making TRY open a new scope that is only
closed by END_CATCH. This way, if you forget to add the END_CATCH,
then compilation fails due to the unbalanced curly braces.
This caught a couple places where we were missing END_CATCH in current
master, also fixed by the patch.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (complete_command): Add missing END_CATCH.
* common/common-exceptions.h (TRY): Open an outermost scope.
Expand intro comment.
(CATCH): Reindent.
(END_CATCH): Close the outermost scope.
* completer.c (complete_line_internal): Add missing END_CATCH.
This is the "natural" extension necessary for the "set cwd" command
(and the whole "set the inferior's cwd" logic) to work on gdbserver.
The idea here is to have a new remote packet, QSetWorkingDir (name
adopted from LLDB's extension to the RSP, as can be seen at
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>),
which sends an hex-encoded string representing the working directory
that the remote inferior will use. There is a slight difference from
the packet proposed by LLDB: GDB's version will accept empty
arguments, meaning that the user wants to clear the previously set
working directory for the inferior (i.e., "set cwd" without arguments
on GDB).
For UNIX-like targets this feature is already implemented on
nat/fork-inferior.c, and all gdbserver has to do is to basically
implement "set_inferior_cwd" and call it whenever such packet arrives.
For other targets, like Windows, it is possible to use the existing
"get_inferior_cwd" function and do the necessary steps to make sure
that the inferior will use the specified working directory.
Aside from that, the patch consists basically of updates to the
testcase (making it available on remote targets) and the
documentation.
No regressions found.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry about new
'set-cwd-on-gdbserver' feature.
(New remote packets): Add entry for QSetWorkingDir.
* common/common-inferior.h (set_inferior_cwd): New prototype.
* infcmd.c (set_inferior_cwd): Remove "static".
(show_cwd_command): Expand text to include remote debugging.
* remote.c: Add PACKET_QSetWorkingDir.
(remote_protocol_features) <QSetWorkingDir>: New entry for
PACKET_QSetWorkingDir.
(extended_remote_set_inferior_cwd): New function.
(extended_remote_create_inferior): Call
"extended_remote_set_inferior_cwd".
(_initialize_remote): Call "add_packet_config_cmd" for
QSetWorkingDir.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (set_inferior_cwd): New function.
* server.c (handle_general_set): Handle QSetWorkingDir packet.
(handle_query): Inform that QSetWorkingDir is supported.
* win32-low.c (create_process): Pass the inferior's cwd to
CreateProcess.
gdb/testsuite/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/set-cwd.exp: Make it available on
native-extended-gdbserver.
gdb/doc/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting your Program) <The working directory.>:
Mention remote debugging.
(Working Directory) <Your Program's Working Directory>:
Likewise.
(Connecting) <Remote Packet>: Add "set-working-dir"
and "QSetWorkingDir" to the table.
(Remote Protocol) <QSetWorkingDir>: New item, explaining the
packet.
This commit adds new "set/show cwd" commands, which are used to
set/show the current working directory of the inferior that will be
started.
The idea here is that "set cwd" will become the de facto way of
setting the inferior's cwd. Currently, the user can use "cd" for
that, but there are side effects: with "cd", GDB also switches to
another directory, and that can impact the loading of scripts and
other files. With "set cwd", we separate the logic into a new
command.
To maintain backward compatibility, if the user issues a "cd" command
but doesn't use "set cwd", then the inferior's cwd will still be
changed according to what the user specified. However, "set cwd" has
precedence over "cd", so it can always be used to override it.
"set cwd" works in the following way:
- If the user sets the inferior's cwd by using "set cwd", then this
directory is saved into current_inferior ()->cwd and is used when
the inferior is started (see below).
- If the user doesn't set the inferior's cwd by using "set cwd", but
rather use the "cd" command as before, then this directory is
inherited by the inferior because GDB will have chdir'd into it.
On Unix-like hosts, the way the directory is changed before the
inferior execution is by expanding the user set directory before the
fork, and then "chdir" after the call to fork/vfork on
"fork_inferior", but before the actual execution. On Windows, the
inferior cwd set by the user is passed directly to the CreateProcess
call, which takes care of the actual chdir for us.
This way, we'll make sure that GDB's cwd is not affected by the user
set cwd.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (New commands): Mention "set/show cwd".
* cli/cli-cmds.c (_initialize_cli_cmds): Mention "set cwd" on
"cd" command's help text.
* common/common-inferior.h (get_inferior_cwd): New prototype.
* infcmd.c (inferior_cwd_scratch): New global variable.
(set_inferior_cwd): New function.
(get_inferior_cwd): Likewise.
(set_cwd_command): Likewise.
(show_cwd_command): Likewise.
(_initialize_infcmd): Add "set/show cwd" commands.
* inferior.h (class inferior) <cwd>: New field.
* nat/fork-inferior.c: Include "gdb_tilde_expand.h".
(fork_inferior): Change inferior's cwd before its execution.
* windows-nat.c (windows_create_inferior): Pass inferior's cwd
to CreateProcess.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (current_inferior_cwd): New global variable.
(get_inferior_cwd): New function.
* inferiors.h (struct process_info) <cwd>: New field.
gdb/doc/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting your Program) <The working directory.>:
Mention new "set cwd" command.
(Working Directory) <Your Program's Working Directory>:
Rephrase to explain that "set cwd" exists and is the default
way to change the inferior's cwd.
gdb/testsuite/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/set-cwd.c: New file.
* gdb.base/set-cwd.exp: Likewise.
Currently, whenever we want to handle paths provided by the user and
perform tilde expansion on GDB, we rely on "tilde_expand", which comes
from readline. This was enough for our use cases so far, but the
situation will change when we start dealing with paths on gdbserver as
well, which is what the next patches implement.
Unfortunately it is not possible to use "tilde_expand" in this case
because gdbserver doesn't use readline. For that reason I decided to
implement a new "gdb_tilde_expand" function, which is basically a
wrapper for "glob" and its GNU extension, GLOB_TILDE_CHECK. With the
import of the "glob" module from gnulib, we're sure that "glob" always
supports this extension.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add gdb_tilde_expand.c.
(HFILES_NO_SRCDIR): Add gdb_tilde_expand.h.
(COMMON_OBS): Add gdb_tilde_expand.o.
* common/gdb_tilde_expand.c: New file.
* common/gdb_tilde_expand.h: Likewise.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add $(srcdir)/common/gdb_tilde_expand.c.
(OBS): Add gdb_tilde_expand.o.
Passing enum as a first argument to variadic argument function
may lead to undefined behavior. The explanation on CERT site:
https://www.securecoding.cert.org/confluence/display/cplusplus/
EXP58-CPP.+Pass+an+object+of+the+correct+type+to+va_start
The bug was found by Kirill Nedostoev (nedostoev.ka@phystech.edu)
when he tried to build GNU binutils with Clang 7.
PR 22245
* bfd.c (bfd_set_error): Avoid UB on passing arg to va_start that
undergoes default promotion.
* bfd-in2.h: Regenerate.
Remove a duplicate `struct objfile' declaration mistakenly added with
commit 3e29f34a4e ("MIPS: Keep the ISA bit in compressed code
addresses").
gdb/
* gdbarch.sh (objfile): Remove duplicate declaration.
* gdbarch.h: Regenerate.
I made a mistake earlier and used string_printf where I should have used
string_vprintf.
I'm checking this in as obvious.
2017-10-03 Tom Tromey <tom@tromey.com>
* utils.c (internal_vproblem): Use string_vprintf.
This removes a cleanup by using std::string in info_symbol_command.
2017-10-03 Tom Tromey <tom@tromey.com>
* printcmd.c (info_symbol_command): Use std::string.
This removes a cleanup by using std::string in
gdb_safe_append_history.
2017-10-03 Tom Tromey <tom@tromey.com>
* top.c (gdb_safe_append_history): Use std::string.
This removes new_ui and delete_ui in favor of ordinary 'new' and
'delete', and then removes make_delete_ui_cleanup in favor of
std::unique_ptr.
2017-10-03 Tom Tromey <tom@tromey.com>
* event-top.c (stdin_event_handler): Update.
* main.c (captured_main_1): Update.
* top.h (make_delete_ui_cleanup): Remove.
(struct ui): Add constructor and destructor.
(new_ui, delete_ui): Remove.
* top.c (make_delete_ui_cleanup): Remove.
(new_ui_command): Use std::unique_ptr.
(delete_ui_cleanup): Remove.
(ui::ui): Rename from new_ui. Update.
(free_ui): Remove.
(ui::~ui): Rename from delete_ui. Update.
This changes load_progress to use gdb::byte_vector, removing a
cleanup.
2017-10-03 Tom Tromey <tom@tromey.com>
* symfile.c (load_progress): Use gdb::byte_vector.
This converts internal_vproblem and defaulted_query to use
std::string.
2017-10-03 Tom Tromey <tom@tromey.com>
* utils.c (internal_vproblem): Use std::string.
(defaulted_query): Likewise.
This removes set_batch_flag_and_make_cleanup_restore_page_info and
make_cleanup_restore_page_info in favor of a new RAII class. This
then allows for the removal of make_cleanup_restore_uinteger and
make_cleanup_restore_integer
ChangeLog
2017-10-03 Tom Tromey <tom@tromey.com>
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Update.
* top.c (execute_command_to_string): Update.
* utils.c (make_cleanup_restore_page_info): Remove.
(do_restore_page_info_cleanup): Remove.
(set_batch_flag_and_restore_page_info):
New.
(make_cleanup_restore_page_info): Remove.
(set_batch_flag_and_make_cleanup_restore_page_info): Remove.
(~set_batch_flag_and_restore_page_info): New
(make_cleanup_restore_uinteger): Remove.
(make_cleanup_restore_integer): Remove.
(struct restore_integer_closure): Remove.
(restore_integer): Remove.
* utils.h (struct set_batch_flag_and_restore_page_info): New
class.
(set_batch_flag_and_make_cleanup_restore_page_info): Remove.
(make_cleanup_restore_page_info): Remove.
(make_cleanup_restore_uinteger) Remove.
(make_cleanup_restore_integer) Remove.
This changes record_full_gdb_operation_disable_set to return a
scoped_restore rather than a cleanup, and fixes all the users.
ChangeLog
2017-10-03 Tom Tromey <tom@tromey.com>
* record-full.h (record_full_gdb_operation_disable_set): Return
scoped_restore_tmpl<int>.
* infrun.c (adjust_pc_after_break): Update.
(handle_signal_stop): Update.
* record-full.c (record_full_gdb_operation_disable_set): Return
scoped_restore_tmpl<int>.
(record_full_wait_1, record_full_insert_breakpoint)
(record_full_remove_breakpoint, record_full_save)
(record_full_goto_insn): Update.
* ld.texinfo (-z relro): Expand description.
(DATA_SEGMENT_ALIGN): Note that -z relro is not effective when
running with system page size larger than commonpagesize.
(DATA_SEGMENT_RELRO_END): Be explicit about the alignment.
Printing a string slice ("&str") in Rust would print until the
terminating \0; but that is incorrect because a slice has a length.
This fixes &str printing, and arranges to preserve the type name when
slicing a slice, so that printing a slice of an "&str" works as well.
This is PR rust/22236.
2017-10-02 Tom Tromey <tom@tromey.com>
PR rust/22236:
* rust-lang.c (rust_val_print_str): New function.
(val_print_struct): Call it.
(rust_subscript): Preserve name of slice type.
2017-10-02 Tom Tromey <tom@tromey.com>
PR rust/22236:
* gdb.rust/simple.rs (main): New variable "fslice".
* gdb.rust/simple.exp: Add slice tests. Update string tests.
Something like "ptype &x[..]" (where "x" was a slice) would crash gdb.
rust_subscript wasn't handling slicing in the EVAL_AVOID_SIDE_EFFECTS
case.
2017-10-02 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_subscript): Handle slices in
EVAL_AVOID_SIDE_EFFECTS case.
2017-10-02 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Test ptype of a slice.
rust_slice_type_p was not recognizing &str as a slice type, so indexing
into (or making a slice of) a slice was not working.
2017-10-02 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_slice_type_p): Recognize &str as a slice type.
2017-10-02 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Test index of slice.
I noticed that one function in rust-lang.h was not declared using
"extern". In the interested of uniformity, this patch adds it.
Tested by rebuilding.
2017-10-02 Tom Tromey <tom@tromey.com>
* rust-lang.h (rust_slice_type): Add "extern".
G++ 4.8 trips on:
In file included from /opt/gcc-4.8/include/c++/4.8.5/algorithm:62:0,
from ../../src/gdb/ada-lang.c:65:
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h: In instantiation of ‘_RandomAccessIterator std::__unguarded_partition(_RandomAccessIterator, _RandomAccessIterator, const _Tp&) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<ada_exc_info*, std::vector<ada_exc_info> >; _Tp = ada_exc_info]’:
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h:2283:70: required from ‘_RandomAccessIterator std::__unguarded_partition_pivot(_RandomAccessIterator, _RandomAccessIterator) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<ada_exc_info*, std::vector<ada_exc_info> >]’
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h:2315:54: required from ‘void std::__introsort_loop(_RandomAccessIterator, _RandomAccessIterator, _Size) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<ada_exc_info*, std::vector<ada_exc_info> >; _Size = long int]’
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h:5461:36: required from ‘void std::sort(_RAIter, _RAIter) [with _RAIter = __gnu_cxx::__normal_iterator<ada_exc_info*, std::vector<ada_exc_info> >]’
../../src/gdb/ada-lang.c:13153:61: required from here
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h:2245:19: error: passing ‘const ada_exc_info’ as ‘this’ argument of ‘bool ada_exc_info::operator<(const ada_exc_info&)’ discards qualifiers [-fpermissive]
while (__pivot < *__last)
^
Seems to be a libstdc++ bug meanwhile fixed by:
https://gcc.gnu.org/ml/libstdc++/2012-04/msg00074.
In any case, there's no reason these methods can't be const.
gdb/ChangeLog:
2017-10-02 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_exc_info::operator<): Make const.
(ada_exc_info::operator==): Make const.
* ada-lang.c (ada_exc_info::operator<, ada_exc_info::operator==):
Make const.
In gdbserver, target descriptions need to be initialized by calling
init_target_desc. Because i386_create_target_description is shared with
GDB, it doesn't do that, the callers must take care of it. These two
platforms currently don't.
I am not able to build them, so I couldn't test.
gdb/gdbserver/ChangeLog:
* lynx-i386-low.c (lynx_i386_arch_setup): Call init_target_desc.
* nto-x86-low.c (nto_x86_arch_setup): Likewise.
