With the general use of C99 there's no need anymore to have i386-gen
produce these. For more frequently used ones introduce local #define-s,
while others are simply spelled out directly. While doing this move
some static constants into more narrow scopes.
Note that as a "side effect" this corrects type_names[]'es imm8s entry.
Earlier tidying still missed an opportunity: There's no need for the
"anyimm" static variable. Instead of using it in the loop to mask
"allowed" (which is necessary to satisfy operand_type_or()'s assertions)
simply use "mask", requiring it to be calculated first. That way the
post-loop masking by "mask" ahead of the operand_type_all_zero() can be
dropped.
AMX-TILE is a prereq to these, as already correctly expressed by
CPU_ANY_AMX_TILE_FLAGS. Express the dependency also in the reverse
("positive") direction.
The only case where 64-bit code uses non-sign-extended (can also be
considered zero-extended) displacements is when an address size override
is in place for a memory operand (i.e. particularly excluding
displacements of direct branches, which - if at all - are controlled by
operand size, and then are still sign-extended, just from 16 bits).
Hence the distinction in templates is unnecessary, allowing code to be
simplified in a number of places. The only place where logic becomes
more complicated is when signed-ness of relocations is determined in
output_disp().
The other caveat is that Disp64 cannot be specified anymore in an insn
template at the same time as Disp32. Unlike for non-64-bit mode,
templates don't specify displacements for both possible addressing
modes; the necessary adjustment to the expected ones has already been
done in match_template() anyway (but of course the logic there needs
tweaking now). Hence the single template so far doing so is split.
Commit 7d5e4556a3 rendered the check near the end of what is now
i386_finalize_displacement() entirely dead for AT&T mode, since for
operands involving a displacement .unspecified will always be set. But
the logic there is bogus anyway - Intel syntax operand size specifiers
are of no interest there either. The only thing which matters in the
"displacement only" determination is .baseindex.
Of course when masking displacement kinds we should not at the same time
also mask off other attributes.
Furthermore the type mask returned by lex_got() also needs to be
adjusted: The only case where we want Disp32 (rather than Disp32S) is
when dealing with 32-bit addressing mode in 64-bit code.
Setting this field risks cpu_flags_all_zero() mistakenly returning
"false" when the object passed in was e.g. the result of ANDing together
two objects which had the bit set, or ANDNing together an object with
the field set and one with the field clear.
While there also avoid setting CpuNo64: Like Cpu64 this is driven
differently anyway and hence shouldn't be set anywhere by default.
Note that the moving of the two items in i386-gen.c's cpu_flags[] is
only for documentation purposes (and slight reducing of overhead), as
the fields are sorted anyway upon program start.
There's no need for the arbitrary special "unknown" token: Simply
recognize the leading ~ and process everything else the same, merely
recording whether to set individual fields to 1 or 0.
While there exclude CpuIAMCU from CPU_UNKNOWN_FLAGS - CPU_IAMCU_FLAGS
override cpu_arch_flags anyway when -march=iamcu is passed, and there's
no reason to have the stray flag set even if no insn actually is keyed
to it.
The checks done by check_cpu_arch_compatible() were halfway sensible
only at the time where only L1OM support was there. The purpose,
however, has always been to prevent bad uses of .arch (turning off the
base CPU "feature" flag) while at the same time permitting extensions to
be enabled / disabled. In order to achieve this (and to prevent
regressions when L1OM and K1OM support are removed)
- set CpuIAMCU in CPU_IAMCU_FLAGS,
- adjust the IAMCU check in the function itself (the other two similarly
broken checks aren't adjusted as they're slated to be removed anyway),
- avoid calling the function for extentions (which would never have the
base "feature" flag set),
- add a new testcase actually exercising ".arch iamcu" (which would also
regress with the planned removal).
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
Intel AVX512 FP16 instructions use maps 3, 5 and 6. Maps 5 and 6 use 3 bits
in the EVEX.mmm field (0b101, 0b110). Map 5 is for instructions that were FP32
in map 1 (0Fxx). Map 6 is for instructions that were FP32 in map 2 (0F38xx).
There are some exceptions to this rule. Some things in map 1 (0Fxx) with imm8
operands predated our current conventions; those instructions moved to map 3.
FP32 things in map 3 (0F3Axx) found new opcodes in map3 for FP16 because map3
is very sparsely populated. Most of the FP16 instructions share opcodes and
prefix (EVEX.pp) bits with the related FP32 operations.
Intel AVX512 FP16 instructions has new displacements scaling rules, please refer
to the public software developer manual for detail information.
gas/
2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
Wei Xiao <wei3.xiao@intel.com>
Lili Cui <lili.cui@intel.com>
* config/tc-i386.c (struct Broadcast_Operation): Adjust comment.
(cpu_arch): Add .avx512_fp16.
(cpu_noarch): Add noavx512_fp16.
(pte): Add evexmap5 and evexmap6.
(build_evex_prefix): Handle EVEXMAP5 and EVEXMAP6.
(check_VecOperations): Handle {1to32}.
(check_VecOperands): Handle CheckRegNumb.
(check_word_reg): Handle Toqword.
(i386_error): Add invalid_dest_and_src_register_set.
(match_template): Handle invalid_dest_and_src_register_set.
* doc/c-i386.texi: Document avx512_fp16, noavx512_fp16.
opcodes/
2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
Wei Xiao <wei3.xiao@intel.com>
Lili Cui <lili.cui@intel.com>
* i386-dis.c (EXwScalarS): New.
(EXxh): Ditto.
(EXxhc): Ditto.
(EXxmmqh): Ditto.
(EXxmmqdh): Ditto.
(EXEvexXwb): Ditto.
(DistinctDest_Fixup): Ditto.
(enum): Add xh_mode, evex_half_bcst_xmmqh_mode, evex_half_bcst_xmmqdh_mode
and w_swap_mode.
(enum): Add PREFIX_EVEX_0F3A08_W_0, PREFIX_EVEX_0F3A0A_W_0,
PREFIX_EVEX_0F3A26, PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A56,
PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66, PREFIX_EVEX_0F3A67,
PREFIX_EVEX_0F3AC2, PREFIX_EVEX_MAP5_10, PREFIX_EVEX_MAP5_11,
PREFIX_EVEX_MAP5_1D, PREFIX_EVEX_MAP5_2A, PREFIX_EVEX_MAP5_2C,
PREFIX_EVEX_MAP5_2D, PREFIX_EVEX_MAP5_2E, PREFIX_EVEX_MAP5_2F,
PREFIX_EVEX_MAP5_51, PREFIX_EVEX_MAP5_58, PREFIX_EVEX_MAP5_59,
PREFIX_EVEX_MAP5_5A_W_0, PREFIX_EVEX_MAP5_5A_W_1,
PREFIX_EVEX_MAP5_5B_W_0, PREFIX_EVEX_MAP5_5B_W_1,
PREFIX_EVEX_MAP5_5C, PREFIX_EVEX_MAP5_5D, PREFIX_EVEX_MAP5_5E,
PREFIX_EVEX_MAP5_5F, PREFIX_EVEX_MAP5_78, PREFIX_EVEX_MAP5_79,
PREFIX_EVEX_MAP5_7A, PREFIX_EVEX_MAP5_7B, PREFIX_EVEX_MAP5_7C,
PREFIX_EVEX_MAP5_7D_W_0, PREFIX_EVEX_MAP6_13, PREFIX_EVEX_MAP6_56,
PREFIX_EVEX_MAP6_57, PREFIX_EVEX_MAP6_D6, PREFIX_EVEX_MAP6_D7
(enum): Add EVEX_MAP5 and EVEX_MAP6.
(enum): Add EVEX_W_MAP5_5A, EVEX_W_MAP5_5B,
EVEX_W_MAP5_78_P_0, EVEX_W_MAP5_78_P_2, EVEX_W_MAP5_79_P_0,
EVEX_W_MAP5_79_P_2, EVEX_W_MAP5_7A_P_2, EVEX_W_MAP5_7A_P_3,
EVEX_W_MAP5_7B_P_2, EVEX_W_MAP5_7C_P_0, EVEX_W_MAP5_7C_P_2,
EVEX_W_MAP5_7D, EVEX_W_MAP6_13_P_0, EVEX_W_MAP6_13_P_2,
(get_valid_dis386): Properly handle new instructions.
(intel_operand_size): Handle new modes.
(OP_E_memory): Ditto.
(OP_EX): Ditto.
* i386-dis-evex.h: Updated for AVX512_FP16.
* i386-dis-evex-mod.h: Updated for AVX512_FP16.
* i386-dis-evex-prefix.h: Updated for AVX512_FP16.
* i386-dis-evex-reg.h : Updated for AVX512_FP16.
* i386-dis-evex-w.h : Updated for AVX512_FP16.
* i386-gen.c (cpu_flag_init): Add CPU_AVX512_FP16_FLAGS,
and CPU_ANY_AVX512_FP16_FLAGS. Update CPU_ANY_AVX512F_FLAGS
and CPU_ANY_AVX512BW_FLAGS.
(cpu_flags): Add CpuAVX512_FP16.
(opcode_modifiers): Add DistinctDest.
* i386-opc.h (enum): (AVX512_FP16): New.
(i386_opcode_modifier): Add reqdistinctreg.
(i386_cpu_flags): Add cpuavx512_fp16.
(EVEXMAP5): Defined as a macro.
(EVEXMAP6): Ditto.
* i386-opc.tbl: Add Intel AVX512_FP16 instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Ditto.
AMD ABM has 2 instructions: popcnt and lzcnt. ABM CPUID feature bit has
been reused for lzcnt and a POPCNT CPUID feature bit is added for popcnt
which used to be the part of SSE4.2. This patch removes CpuABM and adds
CpuPOPCNT. It changes ABM to enable both lzcnt and popcnt, changes SSE4.2
to also enable popcnt.
gas/
* config/tc-i386.c (cpu_arch): Add .popcnt.
* doc/c-i386.texi: Remove abm and .abm. Add popcnt and .popcnt.
Add a tab before @samp{.sse4a}.
opcodes/
* i386-gen.c (cpu_flag_init): Replace CpuABM with
CpuLZCNT|CpuPOPCNT. Add CpuPOPCNT to CPU_SSE4_2_FLAGS. Add
CPU_POPCNT_FLAGS.
(cpu_flags): Remove CpuABM. Add CpuPOPCNT.
* i386-opc.h (CpuABM): Removed.
(CpuPOPCNT): New.
(i386_cpu_flags): Remove cpuabm. Add cpupopcnt.
* i386-opc.tbl: Replace CpuABM|CpuSSE4_2 with CpuPOPCNT on
popcnt. Remove CpuABM from lzcnt.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Since SSE3 is independent of SSE4a, don't disable SSE3 when disabling
SSE4a.
* i386-gen.c (cpu_flag_init): Remove CPU_ANY_SSE3_FLAGS from
CPU_ANY_SSE4A_FLAGS.
commit 7deea9aad8 changed nosse4 to include CpuSSE4a. But AMD SSE4a is
a superset of SSE3 and Intel SSE4 is a superset of SSSE3. Disable Intel
SSE4 shouldn't disable AMD SSE4a. This patch restores nosse4. It also
adds .sse4a and nosse4a.
gas/
* config/tc-i386.c (cpu_arch): Add .sse4a and nosse4a. Restore
nosse4.
* doc/c-i386.texi: Document sse4a and nosse4a.
opcodes/
* i386-gen.c (cpu_flag_init): Add CPU_ANY_SSE4A_FLAGS. Remove
CPU_ANY_SSE4_FLAGS.
EsSeg (a per-operand bit) is used with IsString (a per-insn attribute)
only. Extend the attribute to 2 bits, thus allowing to encode
- not a string insn,
- string insn with neither operand requiring use of %es:,
- string insn with 1st operand requiring use of %es:,
- string insn with 2nd operand requiring use of %es:,
which covers all possible cases, allowing to drop EsSeg.
The (transient) need to comment out the OTUnused #define did uncover an
oversight in the earlier OTMax -> OTNum conversion, which is being taken
care of here.
Special register "class" instances can't be combined with one another
(neither in templates nor in register entries), and hence it is not a
good use of resources (memory as well as execution time) to represent
them as individual bits of a bit field.
Furthermore the generalization becoming possible will allow
improvements to the handling of insns accepting only individual
registers as their operands.
Many operand types, in particular the various kinds of registers, can't
be combined with one another (neither in templates nor in register
entries), and hence it is not a good use of resources (memory as well as
execution time) to represent them as individual bits of a bit field.
... instead of an operand type bit: It's an insn property, not an
operand one. There's just one actual change to be made to the
templates: Most are now required to have the (unswapped) destination go
into ModR/M.rm, so VMOVD template needs its opcode adjusted accordingly
and its operands swapped. {,V}MOVS{S,D}, otoh, are left alone in this
regard, as otherwise generated code would differ from what we've been
producing so far (which I don't think is wanted).
Take the opportunity and add a missing IgnoreSize to pextrb (leading to
an error in 16-bit mode), and take the liberty to once again drop stray
IgnoreSize attributes from lines changed and neighboring related ones.
They're the only exception to there generally being no mix of register
kinds possible in an insn operand template, and there being two bits per
operand for their representation is also quite wasteful, considering the
low number of uses. Fold both bits and deal with the little bit of
fallout.
Also take the liberty and drop dead code trying to set REX_B: No segment
register has RegRex set on it.
Additionally I was quite surprised that PUSH/POP with the permitted
segment registers is not covered by the test cases. Add the missing
pieces.
