the end of the list of objfiles, instead of at the beginning.
* xcoffread.c (allocate_include_entry): New function, abstracted
from code in record_include_begin.
(record_include_begin, record_include_end): Call it.
* blockframe.c (reinit_frame_cache): Test inferior_pid instead of
target_has_stack to decide whether to create a real stack frame
for the cache.
* coffread.c (process_coff_symbol) [CXUX_TARGET]: Ignore vendor
section.
* config/m88k/tm-cxux.h (CXUX_TARGET): Define.
* h8300-tdep.c: Include "dis-asm.h" instead of <dis-asm.h>.
* (nlm_symfile_read): Record bounds of main() so that backtrace
command will know where to stop.
* objfiles.c (objfile_relocate): Relocate entry point/func info
for backtrace as well.
* objfiles.h: Define values for invalid PCs for entry point info.
* symfile.c (init_entry_point_info): Initialize invalid values
with aforementioned macros.
* config/alpha/tm-alphanw.h: Turn on FRAME_CHAIN_VALID_ALTERNATE
to cause backtrace to stop when it gets back to main().
* config/i386/tm-i386nw.h: Ditto.
library functions before the executable is run.
* elfread.c (elf_symtab_read): Handle symbols for shared library
functions.
* sparc-tdep.c (in_solib_trampoline): Renamed to in_plt_section
and moved to objfiles.c.
* objfiles.c (in_plt_section): Moved to here from sparc-tdep.
* config/tm-sysv4.h (IN_SOLIB_TRAMPOLINE): Use new in_plt_section.
* config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE): Removed,
the new generic definition from tm-sysv4.h works for Solaris.
* alpha-tdep.c: Gobs of changes (many imported from mips-tdep) to
improve remote debugging efficiency. Also fixed problems with
doing function calls for programs with no entry points.
* infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of
entry_point_address.
* inferior.h (PC_IN_CALL_DUMMY): ditto.
* mdebugread.c (parse_symbol, parse_procedure, parse_external,
parse_lines): Pass section_offsets info to these routines so that
we can relocate symbol table entries upon readin.
* (psymtab_to_symtab_1): Set symtab->primary to tell
objfile_relocate to do relocations for our symbols.
* (ecoff_relocate_efi): New routine to relocate adr field of PDRs
(which hang off of the symbol table).
* Use prim_record_minimal_symbols_and_info instead of
prim_record_minimal_symbols to supply section info to make minimal
symbol relocations work.
* minsyms.c (prim_record_minimal_symbols_and_info): If section is
-1, try to deduce it from ms_type.
* objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where
appropriate. Handle relocation of MIPS_EFI symbols special. Also,
add code to relocate objfile->sections data structure.
* remote.c (get_offsets): Use new protocol message to acquire
section offsets from the target.
* (remote_wait): Get rid of relocation stuff. That's all handled
by objfile_relocate now.
* config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h.
* config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and
VM_MIN_ADDRESS.
* config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster
and means that these filenames no longer need be unique across all
the config/* directories.
* configure.in: Put the config/*/ into TM_FILE, etc.
* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
and trapv exceptions.
* target.h (struct section_table), objfiles.h (struct obj_section):
Change name of field sec_ptr to the_bfd_section. More mnemonic
and avoids the (sort of, for the ptx compiler) name clash with
the name of the typedef.
* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
* utils.c: Include readline.h.
* Makefile.in (utils.o): Add dependency.
* remote.c (getpkt): Add support for run-length encoding.
VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
* symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
(CORE_ADDR)0, from target_link, since that is what it uses.
Process name at end, not during parsing (like we did before Kung's
change), so that -readnow and -mapped can appear anywhere.
Make text_relocation a local variable.
* config/i386/i386os9k.mt: Fix comment.
* Makefile.in (ALLDEPFILES): Add remote-os9k.c.
* os9kread.c: Put "comments" after #endif inside /* */.
* stabsread.h: Add os9k_stabs variable.
* stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
Set it.
* stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
descriptor in global_symbols not local_symbols.
(read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
descriptors.
(read_type): If os9k_stabs, accept function parameters after 'f'
type descriptor.
(read_array_type): If os9k_stabs, don't expect index type and
expect lower and upper to be separated by ',' not ';'.
(read_enum_type): If os9k_stabs, read a number before the first
enumeration constant.
(os9k_init_type_vector): New function.
(dbx_lookup_type): Call it when starting new type vector.
* config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
* (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
* os9kstab.c: Removed.
* Makefile.in: Update accordingly.
* objfiles.c (objfile_relocate_data): Removed.
* remote-os9k.c (rombug_wait): Call objfile_relocate
not objfile_relocate_data.
* objfiles.h, objfiles.c: Remove find_pc_objfile.
* remote-os9k.c (rombug_wait): Call find_pc_section not
find_pc_objfile.
* main.c (quit_command): Check inferior_pid; revert Kung change.
* remote-os9k.c (rombug_create_inferior): Set inferior_pid.
ChangeLog objfiles.c objfiles.h symfile.c target.c main.c
Makefile.in configure.in
Added Files:
os9kread.c os9kstab.c remote-os9k.c
* os9kread.c: New file to read os9000 style symbo table.
* os9kstab.c: new file to read os9000 style stabs.
* remote-os9k.c: remote protocol talking to os9000 rombug monitor.
* objfiles.c (find_pc_objfile): new function to search objfile
from pc.
* objfiles.c (objfile_relocate_data): new function to relocate
data symbols in symbol table.
* objfiles.h: Add two aux fields in struct objfile to handle
multiple symbol table files situation like in os9000.
* symfile.c: Change so 'symbol-file' command can handle multiple
files. Also call target_link() to get relocation infos.
* target.c (target_link): new function to get relocation info when
a symbol file is requested to load.
* main.c (quit_command): take out 'inferior_pid != 0' condition,
because in cross mode there's no inferior pid, bit they need to
be detached.
Makefile.in: add os9kread.c os9kstab.c and .o's.
configure.in: add i386os9k target.
config/i386/i386os9k.mt: new add.
config/i386/tm-i386os9k.h: new add.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
right operations ourself, rather than calling symbol_file_command.
If we re-read something, call clear_symtab_users not just
breakpoint_re_set.
* objfiles.h, objfiles.c (build_objfile_section_table): No longer
static.
* symfile.c (clear_symtab_users): Call clear_pc_function_cache.
* coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, paread.c
(*_symfile_offsets): Set objfile->num_sections.
* remote.c (remote_wait), symfile.c (syms_from_objfile):
Don't muck with objfile->num_sections now that all the symbol
readers set it.
* elfread.c: Clean up obsolete comment about handling only DWARF.
* paread.c: Remove comment about how we should use an "ordinary"
file format with an hppa suffix. There is nothing ordinary about SOM.
* symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
Clean up problems with targets and hosts that have 64 bit longs
and pointers and 32 bit ints.
* breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Change all printf formats from %x to %lx if outputting an address.
Change la_*_format to use long format.
local_hex_string, local_hex_string_custom now take an unsigned long
argument, change all callers.
* coffread.c (read_coff_symtab): Remove superfluous cast for
complaint output.
* dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
* findvar.c, value.h (write_register): Change register value to long.
* gdbtypes.h (struct type): Change `bitsize' to long as
TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
* inferior.h (struct inferior_status): Change type of stop_pc to
CORE_ADDR.
* language.h (local_octal_string, local_octal_string_custom):
Remove prototype, the functions are neither defined nor used.
* mipsread.c (parse_symbol): Use temporary variable for bitsize as
f->bitsize is a long now.
* objfiles.c (add_to_objfile_sections, build_objfile_section_table):
Use unsigned long casts instead of int for abusing sections_end
pointer as integer.
* stack.c (parse_frame_specification): Change type of `args' to
CORE_ADDR for SETUP_ARBITRARY_FRAME.
* printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE.
* mipsread.c (parse_type): Alpha cc now supports the t->continued
bit, update algorithm to match the way the compiler uses it.
use from the type.
* objfiles.c: Include gdb-stabs.h for SECT_* macros.
(objfile_relocate): Relocate textlow and texthigh in psymtabs.
Relocate partial symbols. Check that minimal SYMBOL_SECTION is
nonnegative before using it.
* symtab.h: Adjust section field comment.
we have breakpoints or watchpoints as we might have to ignore internal
breakpoints.
Fix gdb core dumps after `file newfile' commands.
* symtab.h, symfile.c (clear_symtab_users): New routine which
unconditionally clears symtab users. clear_symtab_users_once
commented out as it was a noop anyway.
* objfiles.c (free_objfile): Don't call clear_symtab_users_once.
* objfiles.c (free_all_objfiles), symfile.c (new_symfile_objfile),
xcoffexec.c (exec_close): Call clear_symtab_users if necessary.
* symfile.c (syms_from_objfile): Install cleanups for errors during
symbol reading.
* coffread.c, dbxread.c, mipsread.c, xcoffread.c (*_symfile_read):
Lint cleanup code, call do_cleanups explicitly.
* symfile.c (symbol_file_add): Call new_symfile_objfile and
reinit_frame_cache _after_ the new symbols are read in.
* dwarfread.c (scan_partial_symbols): Skip over DIE's within
function scopes when building partial symbol tables.
* objfiles.c (open_existing_mapped_file): Make it clear in
warning message that out of date mapped files are ignored.
* symtab.c (lookup_symtab_1, lookup_symbol): Print compilation
unit source file name in error message.
at_import, at_frame_base.
* dwarfread.c (completedieinfo): Remove cases for obsolete
AT_visibility, AT_import, and AT_frame_base attributes.
* breakpoint.h (BREAKPOINT_MAX): Increase from 10 to 16 for
i860, which can keep up to 4 shadow breakpoints.
* tm-stratus.h (USG): Define.
* tm-stratus.h (TARGET_BYTE_ORDER): Define to BIG_ENDIAN.
* xm-stratus.h (HOST_BYTE_ORDER): Define to BIG_ENDIAN.
* xm-stratus.h (xm-sysv4.h): Include, name changed from xm-svr4.h.
* xm-stratus.h (NO_JOB_CONTROL): Remove define.
* config/stratus.mt (TDEPFILES): Include files available from
stratus that are not yet in release pending receipt of paperwork
at FSF.
* buildsym.c (finish_block): Minor code format change.
* gdbtypes.h (struct field): Add to comments.
* gdbtypes.h (virtual_field_bits): Add to comments.
* objfiles.c (allocate_objfile): Change obstack interface to
match FSF merging efforts.
with alloca, to avoid using random values from stack later on.
* defs.h (fprintf_filtered): Add prototype.
* gdbtypes.c (check_stub_method): Fix misleading comments.
* gdbtypes.c (print_arg_types, dump_fn_fieldlists): New maint
support functions.
* gdbtypes.c (print_cplus_stuff, recursive_dump_type): Many
small changes to maint support functions.
* gdbtypes.h (cplus_struct_type): Reorganize member ordering
for some fields and expand comments.
* objfiles.c (allocate_objfile): Use new obstack_alloc_arg
macro and track change to obstack_full_begin macro.
* utils.c (fprintfi_filtered): New function.
* valprint.c (type_print_base): Fixup field printing to not
print extraneous lines and not print bogus "no data fields"
messages for C++ classes with no data members. Also use new
fprintfi_filtered function.
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
extra info in the minimal symbol.
(elf_symtab_read): The extra info is the size of an ELF object,
which was kludged to us in the `udata' field of the BFD symbol.
Gag me with a crowbar...
(elf_symfile_read): Keep track of both the absolute load address,
and the offset between load addr and symbols. Handle STABS as
well as DWARF sections, passing the absolute load address to
elfstab_build_psymtabs.
* objfiles.c (free_objfile): Eliminate storage leaks. Contributed
by <Peter.Schauer@regent.e-technik.tu-muenchen.dbp.de>.
* symfile.c (symfile_bfd_open): Comment where name is freed.
* symmisc.c (extend_psymbol_list): Comment where list is freed.
disconnecting from controlling terminal, to avoid gdb hanging
on SVR4. Fixes bug reported by Oliver Okrongli.
* procfs.c (PROC_NAME_FMT): Change format to match default used
by system, as suggested by Oliver Okrongli.
* tm-68k.h (FRAME_FIND_SAVED_REGS): Apply missing parentheses
bug fix from Brent Townshend (bst%tt@cam.ORG).
* c-exp.y (nonempty_typelist): Fix memory overrun bug reported
by turlais@rechser.total.fr.
* dwarfread.c (decode_subscr_data): Fix bug in calculation of
length of non-zero lowerbound arrays. Bug fix from Peggy Fieland.
* objfiles.h (unlink_objfile): Add prototype.
* objfiles.c (unlink_objfile): Add function.
* objfiles.c (free_objfile): Call unlink_objfile.
* objfiles.c (allocate_objfile): Call unlink_objfile on newly
remapped objfiles. Bug reported by hahn@sunshine.labs.tek.com.
Also, discard old possibly bogus sf struct.
* symfile.c (symbol_file_add): Call init_entry_point_info() and
find_sym_fns() for remapped symbol files, in case of any changes
since the last mapping.
* objfiles.c (free_objfile): Only try to unmap files when
reusable objfiles are supported.
* valprint.c (type_print_varspec_suffix): Add parameter that
specifies if C++ demangling included function arguments. Use
it to suppress printing extra pair of ()'s.
* valprint.c (type_print_1): Fix problem with printing demangled
C++ function types where demangled type includes the function
args.
basis. See comments in objfiles.h and details in ChangeLog. Also remove
redundant definitions of FRAME_CHAIN_VALID from most of the tm-* files and
use a default definition in frame.h.
elfread.c (coff_symfile_finish): Add function, prototype, and
add to the xxxx_sym_fns struct for each file type. Also reformat
the xxxx_sym_fns vector to a standard format and add comments.
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c,
elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read):
Pass pointer to struct objfile rather than pointer to sym_fns.
Change references inside each function accordingly. Allocate any
symbol file specific info in the per-objfile memory region.
* dbxread.c (free_and_init_header_files): Break function into
free_header_files(), called from dbx_symfile_finish(), and
init_header_files(), called from dbx_new_init().
* dbxread.c (dbx_new_init): Move deallocation things to new
dbx_symfile_finish function.
* elfread.c (elf_new_init): Call buildsym_new_init().
* objfiles.c (free_objfile): Call the appropriate symfile_finish()
routine for the objfile before deallocating other stuff.
* sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg.
* symfile.h: Move struct sym_fns to before struct objfile def.
Add sym_finish function pointer and change prototypes of other
function pointers to reflect passing struct objfile pointer rather
than struct sym_fns pointer.
* symfile.c: Remove now obsolete symtab_fns pointer.
* symfile.c (symfile_init): Renamed to find_sym_fns, and now only
locates the correct sym_fns struct for the given objfile.
* symfile.c (syms_from_objfile, symbol_file_add): Restructured
for better support of mapped symbol tables.
* symfile.c (symbol_file_command): Remove obsolete code using
symfile_fns.
* symfile.h: Remove duplicate declarations for symfile_objfile,
entry_point, and object_files.
* target.c (target_info): Compare symfile_objfile to NULL.
* xcoffread.c (aixcoff_new_init): Move deallocation stuff to
aixcoff_symfile_finish().
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
* breakpoint.c (breakpoint_re_set): Use ALL_BREAKPOINTS_SAFE.
* symtab.c (find_pc_symtab): Handle having no objfiles.
* infcmd.c: Fix comment.
* objfiles.c (free_all_objfiles): Add.
* symfile.h (ALL_OBJFILES, ALL_OBJFILES_SAFE): Add.
* symfile.c (symbol_file_command): free all objfiles when
specifying a new symbol file.
(reread_symbols): Stat the file name, don't fstat the descriptor.
