This reverts commit b7e5a29602143b53267efcd9c8d5ecc78cd5a62f.
This patch caused problems for some users when building gdb, because
it would cause 'guild' to be invoked with the wrong versin of guile.
On the whole it seems simpler to just back this out.
I'm checking this in to the binutils-gdb repository in the interest of
fixing the build for Andrew. No one has responded to the identical
patch sent to gcc-patches, but I will ping it there.
* Makefile.in: Rebuild.
* Makefile.tpl (BASE_EXPORTS): Remove GUILE.
(GUILE): Remove.
* Makefile.def (flags_to_pass): Remove GUILE.
This update brings in the following commits from the gcc mainline:
commit b7e5a29602143b53267efcd9c8d5ecc78cd5a62f
Author: Tom Tromey <tom@tromey.com>
Date: Tue Jan 9 06:25:26 2024 -0700
Pass GUILE down to subdirectories
When I enable cgen rebuilding in the binutils-gdb tree, the default is
to run cgen using 'guile'. However, on my host, guile is guile 2.2,
which doesn't work for me -- I have to use guile3.0.
This patch arranges to pass "GUILE" down to subdirectories, so I can
use 'make GUILE=guile3.0'.
commit 725fb3595622a4ad8cd078a42fab1c395cbf90cb
Author: Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
Date: Wed Oct 25 13:06:48 2023 +0200
build: Add libgrust as compilation modules
Define the libgrust directory as a host compilation module as well as
for targets. Disable target libgrust if we're not building target
libstdc++.
commit 56ca59a03150cf44cea340f58967c990ed6bf43c
Author: Lewis Hyatt <lhyatt@gmail.com>
Date: Thu Nov 16 11:18:37 2023 -0500
Makefile.tpl: Avoid race condition in generating site.exp from the top level
A command like "make -j 2 check-gcc-c check-gcc-c++" run in the top level of
a fresh build directory does not work reliably. That will spawn two
independent make processes inside the "gcc" directory, and each of those
will attempt to create site.exp if it doesn't exist and will interfere with
each other, producing often a corrupted or empty site.exp. Resolve that by
making these targets depend on a new phony target which makes sure site.exp
is created first before starting the recursive makes.
commit 6a6d3817afa02bbcd2388c8e005da6faf88932f1
Author: Iain Sandoe <iain@sandoe.co.uk>
Date: Sun Mar 28 14:48:17 2021 +0100
Config,Darwin: Allow for configuring Darwin to use embedded runpath.
Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
commit 2551e10038a70901f30b2168e6e3af4536748f3c
Author: Sergei Trofimovich <siarheit@google.com>
Date: Mon Oct 2 12:08:17 2023 +0100
Makefile.tpl: disable -Werror for feedback stage [PR111663]
Without the change profiled bootstrap fails for various warnings on
master branch as:
$ ../gcc/configure
$ make profiledbootstrap
...
gcc/genmodes.cc: In function ‘int main(int, char**)’:
gcc/genmodes.cc:2152:1: error: ‘gcc/build/genmodes.gcda’ profile count data file not found [-Werror=missing-profile]
...
gcc/gengtype-parse.cc: In function ‘void parse_error(const char*, ...)’:
gcc/gengtype-parse.cc:142:21: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
The change removes -Werror just like autofeedback does today.
commit d1bff1ba4d470f6723be83c0e3c4d5083e51877a
Author: Thomas Schwinge <thomas@codesourcery.com>
Date: Thu Jun 1 23:07:37 2023 +0200
Pass 'SYSROOT_CFLAGS_FOR_TARGET' down to target libraries [PR109951]
..., where we need to use it (separate commits) for build-tree testing, similar
to 'gcc/Makefile.in:site.exp':
# TEST_ALWAYS_FLAGS are flags that should be passed to every compilation.
# They are passed first to allow individual tests to override them.
@echo "set TEST_ALWAYS_FLAGS \"$(SYSROOT_CFLAGS_FOR_TARGET)\"" >> ./site.tmp
PR testsuite/109951
* Makefile.tpl (BASE_TARGET_EXPORTS): Add
'SYSROOT_CFLAGS_FOR_TARGET'.
* Makefile.in: Regenerate.
When I enable cgen rebuilding in the binutils-gdb tree, the default is
to run cgen using 'guile'. However, on my host, guile is guile 2.2,
which doesn't work for me -- I have to use guile3.0.
This patch arranges to pass "GUILE" down to subdirectories, so I can
use 'make GUILE=guile3.0'.
* Makefile.in: Rebuild.
* Makefile.tpl (BASE_EXPORTS): Add GUILE.
(GUILE): New variable.
* Makefile.def (flags_to_pass): Add GUILE.
r14-2875-g1ed21e23d6d4da ("Use substituted GDCFLAGS") already
implemented this change, but only on the generated file rather than in
the template it is generated from.
* Makefile.tpl: Substitute @GDCFLAGS@ instead of using
$(CFLAGS).
Compilation during STAGEautofeedback produces additional warnings
since inlining decisions with -fauto-profile are different from
other builds.
This patches disables warnings as errors for STAGEautofeedback.
Tested on x86_64-pc-linux-gnu.
* Makefile.tpl: Disable warnings as errors for STAGEautofeedback
cc1, cc1plus, and lto built during STAGEautoprofile need to be built with
debug info since they are used to build target libs. -gtoggle was
turning off debug info for this stage.
create_gcov should be passed prev-gcc/cc1, prev-gcc/cc1plus, and prev-gcc/lto
instead of stage1-gcc/cc1, stage1-gcc/cc1plus, and stage1-gcc/lto when
processing profile data collected while building target libraries.
Tested on x86_64-pc-linux-gnu.
* Makefile.tpl: Remove -gtoggle for STAGEautoprofile
When we collect just user events for autofdo with lbr we get some events where branch
sources are kernel addresses and branch targets are user addresses. Without kernel MMAP
events create_gcov can't make sense of kernel addresses. Currently create_gcov fails if
it can't map at least 95% of events. We sometimes get below this threshold with just
user events. The change is to collect both user events and kernel events.
Tested on x86_64-pc-linux-gnu.
* Makefile.tpl: Collect both kernel and user events for autofdo
The D front-end is now itself written in D, in order to build GDC, you
will need a working GDC compiler (GCC version 9.1 or later).
GCC changes:
- Add support for bootstrapping the D front-end.
These add the required components in order to have a D front-end written
in D itself. Because the compiler front-end only depends on the core
runtime modules, only libdruntime is built for the bootstrap stages.
D front-end changes:
- Import dmd v2.098.0-beta.1.
Druntime changes:
- Import druntime v2.098.0-beta.1.
Phobos changes:
- Import phobos v2.098.0-beta.1.
The jump from v2.076.1 to v2.098.0 covers nearly 4 years worth of
development on the D programming language and run-time libraries.
* Makefile.def: Add bootstrap to libbacktrace, libphobos, zlib, and
libatomic.
* Makefile.tpl (POSTSTAGE1_HOST_EXPORTS): Fix command for GDC.
(STAGE1_CONFIGURE_FLAGS): Add --with-libphobos-druntime-only if
target-libphobos-bootstrap.
(STAGE2_CONFIGURE_FLAGS): Likewise.
Use of libelf was removed from gcc in r0-104274-g48215350c24d52 ("re PR
lto/46273 (Failed to bootstrap)") around 2010, before gcc-4.6.0.
This change removes unused references to libelf from top-level configure
and Makefile.
* Makefile.def: Drop libelf module and gcc-configure dependency
on it.
* Makefile.tpl (HOST_EXPORTS): Drop unused LIBELFLIBS and
LIBELFINC.
This commit merges the devel/modula2 into master.
The libraries reside in libgm2, the compiler in gcc/m2
and the testsuite in gcc/testsuite/gm2.
* configure.ac (target_libraries): Add target-libgm2.
Add NCN_STRICT_CHECK_TARGET_TOOLS entry for gm2.
Add GCC_TARGET_TOOL entry for gm2. (compare_exclusions)
add gcc/m2/gm2-compiler/M2Version,
gcc/m2/gm2-compiler-boot/SYSTEM and gcc/m2/gm2version.
* Makefile.def (target_modules): Add libgm2. (flags_to_pass)
Add GM2_FOR_TARGET, GM2FLAGS_FOR_TARGET. (dependencies) Add
all-target-libgm2 and on=all-target-libatomic. (languages)
Add entry for language=m2 with gcc-check-target=check-m2
and lib-check-target=check-target-libgm2.
* Makefile.tpl (BUILD_EXPORTS): Add definition for GM2
and GM2FLAGS. (HOST_EXPORTS) Add definition for GM2.
(BASE_TARGET_EXPORTS) Add definition for GM2.
(GM2_FOR_BUILD) Defined. (GM2FLAGS) Defined.
(GM2_FOR_TARGET) Defined. (GM2FLAGS_FOR_TARGET) Defined.
(EXTRA_HOST_FLAGS) Defined. (POSTSTAGE1_FLAGS_TO_PASS)
Add GM2 and GM2_FOR_BUILD. (EXTRA_TARGET_FLAGS) Add
GM2 and GM2FLAGS. (EXTRA_GCC_FLAGS) Add GM2_FOR_TARGET.
Signed-off-by: Gaius Mulley <gaiusmod2@gmail.com>
When the GCC build runs GCC_FOR_TARGET, e.g. for selftests or for
dumping specs, it doesn't use TFLAGS in non-bootstrap scenarios. This
patch arranges for TFLAGS to be passed from the top level down to gcc
in GCC_FOR_TARGET in this case.
* Makefile.tpl (HOST_EXPORTS): Add TFLAGS to GCC_FOR_TARGET.
(EXTRA_GCC_FLAGS): Likewise.
[Sending to binutils, gdb-patches and gcc-patches, since it touches the
top-level Makefile/configure]
I have my debuginfod library installed in a non-standard location
(/opt/debuginfod), which requires me to set
PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config. If I just set it during
configure:
$ PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config ./configure --with-debuginfod
$ make
or
$ ./configure --with-debuginfod PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config
$ make
Then PKG_CONFIG_PATH is only present (and ignored) during the top-level
configure. When running make (which runs gdb's and binutils'
configure), PKG_CONFIG_PATH is not set, which results in their configure
script not finding the library:
checking for libdebuginfod >= 0.179... no
configure: error: "--with-debuginfod was given, but libdebuginfod is missing or unusable."
Change the top-level configure/Makefile system to capture the value
passed when configuring the top-level and pass it down to
subdirectories (similar to CFLAGS, LDFLAGS, etc).
I don't know much about the top-level build system, so I really don't
know if I did this correctly. The changes are:
- Use AC_SUBST(PKG_CONFIG_PATH) in configure.ac, so that
@PKG_CONFIG_PATH@ gets replaced with the actual PKG_CONFIG_PATH value
in config files (i.e. Makefile)
- Add a PKG_CONFIG_PATH Makefile variable in Makefile.tpl, initialized
to @PKG_CONFIG_PATH@
- Add PKG_CONFIG_PATH to HOST_EXPORTS in Makefile.tpl, which are the
variables set when running the sub-configures
I initially added PKG_CONFIG_PATH to flags_to_pass, in Makefile.def, but
I don't think it's needed. AFAIU, this defines the flags to pass down
when calling "make" in subdirectories. We only need PKG_CONFIG_PATH to
be passed down during configure. After that, it's captured in
gdb/config.status, so even if a "make" causes a re-configure later
(because gdb/configure has changed, for example), the PKG_CONFIG_PATH
value will be remembered.
ChangeLog:
* configure.ac: Add AC_SUBST(PKG_CONFIG_PATH).
* configure: Re-generate.
* Makefile.tpl (HOST_EXPORTS): Pass PKG_CONFIG_PATH.
(PKG_CONFIG_PATH): New.
* Makefile.in: Re-generate.
Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf
Update Makefile.tpl to add missing changes in
commit af019bfde9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat Jan 9 06:51:15 2021 -0800
Support the PGO build for binutils+gdb
"autogen Makefile.def" showed no changes in Makefile.in.
PR binutils/26766
* Makefile.tpl (PGO_BUILD_TRAINING_FLAGS_TO_PASS): Add
PGO_BUILD_TRAINING=yes.
(PGO_BUILD_TRAINING_MFLAGS): New.
(all): Pass $(PGO_BUILD_TRAINING_MFLAGS) to the PGO build.
Add the --enable-pgo-build[=lto] configure option. When binutils+gdb
is not built together with GCC, --enable-pgo-build enables the PGO build:
1. First build with -fprofile-generate.
2. Use "make maybe-check-*" to generate profiling data and pass -i to make
to ignore errors when generating profiling data.
3. Use "make clean" to remove the previous build.
4. Rebuild with -fprofile-use.
With --enable-pgo-build=lto, -flto=jobserver -ffat-lto-objects are used
together with -fprofile-generate and -fprofile-use. Add '+' to the command
line for recursive make to support -flto=jobserver -ffat-lto-objects.
NB: --enable-pgo-build=lto enables the PGO build with LTO while
--enable-lto enables LTO support in toolchain.
PR binutils/26766
* Makefile.tpl (BUILD_CFLAGS): New.
(CFLAGS): Append $(BUILD_CFLAGS).
(CXXFLAGS): Likewise.
(PGO_BUILD_GEN_FLAGS_TO_PASS): New.
(PGO_BUILD_TRAINING_CFLAGS): Likewise.
(PGO_BUILD_TRAINING_CXXFLAGS): Likewise.
(PGO_BUILD_TRAINING_FLAGS_TO_PASS): Likewise.
(PGO_BUILD_TRAINING_MFLAGS): Likewise.
(PGO_BUILD_USE_FLAGS_TO_PASS): Likewise.
(PGO-TRAINING-TARGETS): Likewise.
(PGO_BUILD_TRAINING): Likewise.
(all): Add '+' to the command line for recursive make. Support
the PGO build.
* configure.ac: Add --enable-pgo-build[=lto].
AC_SUBST PGO_BUILD_GEN_CFLAGS, PGO_BUILD_USE_CFLAGS and
PGO_BUILD_LTO_CFLAGS. Enable the PGO build in Makefile.
* Makefile.in: Regenerated.
* configure: Likewise.
top * Makefile.def (target_modules): Add libphobos.
(flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and
GDCFLAGS_FOR_TARGET.
(dependencies): Make libphobos depend on libatomic, libbacktrace
configure, and zlib configure.
(language): Add language d.
* Makefile.in: Rebuild.
* Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS.
(HOST_EXPORTS): Add GDC.
(POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD.
(BASE_TARGET_EXPORTS): Add GDC.
(GDC_FOR_BUILD, GDC, GDCFLAGS): New variables.
(GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables.
(EXTRA_HOST_FLAGS): Add GDC.
(STAGE1_FLAGS_TO_PASS): Add GDC.
(EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS.
* config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag
environment variables.
* configure: Rebuild.
* configure.ac: Add target-libphobos to target_libraries. Set and
substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
This patch turns dependencies of non-bootstrap targets on bootstrap
targets for bootstrap builds into dependencies on stage_last. This
arrangement gets stage1-bubble to run from stage_last if we haven't
started a bootstrap yet, and to use the current stage otherwise. This
was already the case of target libs, just not of non-bootstrapped host
modules.
In order to retain preexisting dependencies in non-bootstrap builds,
or in gcc-less builds, this introduces support for @unless/@endunless
pairs in Makefile.in.
There is a remaining possibility of problem if activating, in a tree
configured for bootstrap, a parallel build of two or more modules, at
least one bootstrapped and one not. In this case, make might decide
to build stage_current and stage_last in parallel, the latter will
start a submake to build stage1 while the initial make, having
satisfied stage_current, proceeds to build the bootstrapped module in
non-bootstrapped configurations. The two builds will overlap and will
likely conflict. This situation does NOT arise in normal settings,
however: a post-bootstrap build of all-host all-target will indeed
activate such targets concurrently, but only after building all
bootstrapped modules successfully, and it will have both stage_last
and stage_current targets already satisfied, so the potential race
between builds will not arise.
Another remaining problem, that is slightly expanded with this patch,
is that of an interrupted build in a tree configured for bootstrap,
continued with a non-bootstrapped target. Target modules that were
not bootstrapped would already fail to complete the current stage when
activated explicitly in the command line for a retry; host modules,
however, would attempt to build their bootstrapped dependencies, which
is what led to the problem of concurrent builds addressed with this
patch. An interrupted or failed build might still recover correctly,
if the non-bootstrapped target is activated in both builds, because
then make will remove stage_last when its build command is
interrupted, so that it will attempt to recreate it with stage1-bubble
in the second try. A bootstrap build, however, will not be attempting
to build stage_last, so the file will remain and the retry won't go
through stage1-bubble. We have lived with that for target modules, so
we can probably live with that for host modules too.
Another undesirable consequence of this change is that non-boostrapped
host modules, in a tree configured for bootstrap, when activated as
make all-<module>, will build all of stage1 instead of only the
module's usual dependencies. This is intentional and necessary to fix
the parallel-build problem. If it's not desirable, disabling the
unnecessary bootstrap configuration will suffice to restore the
original set of dependencies.
for ChangeLog
* configure.ac: Introduce support for @unless/@endunless.
* Makefile.tpl (dep-kind): Rewrite with cond; return
postbootstrap in some cases.
(make-postboot-dep, postboot-targets): New.
(dependencies): Do not output postbootstrap dependencies at
first. Output non-target ones changed for configure to depend
on stage_last @if gcc-bootstrap, and the original deps @unless
gcc-bootstrap.
* configure.in, Makefile.in: Rebuilt.
* configure.ac: Update year in copyright notice.
Sync from FSF GCC mainline, bringing in the following patches.
* Makefile.def: Likewise.
* Makefile.tpl: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
2016-12-21 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Don't bootstrap libmpx unless --with-build-config
includes bootstrap-mpx.
2016-12-01 Matthias Klose <doko@ubuntu.com>
* configure.ac: Don't use pkg-config to check for bdw-gc.
2016-11-30 Matthias Klose <doko@ubuntu.com>
* Makefile.def: Remove reference to boehm-gc target module.
* configure.ac: Include pkg.m4, check for --with-target-bdw-gc
options and for the bdw-gc pkg-config module.
2016-11-15 Matthias Klose <doko@ubuntu.com>
* config-ml.in: Remove references to GCJ.
* configure.ac: Likewise.
2016-09-30 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Add target-libffi to target_libraries.
Readd libgcj target disablings, modified to only target-libffi.
Readd target addition of go to unsupported languages.
2016-09-30 Andrew Haley <aph@redhat.com>
* Makefile.def: Remove libjava.
* Makefile.tpl: Likewise.
* configure.ac: Likewise.
2016-09-26 Anton Kolesov <Anton.Kolesov@synopsys.com>
* configure.ac: Disable "sim" directory for arc*-*-*.
2016-09-12 Maciej W. Rozycki <macro@imgtec.com>
* configure.ac: Check for the minimum in-tree MPFR version
handled.
* Makefile.tpl (STAGE1_FLAGS_TO_PASS): New variable.
(all-[+prefix+][+module+]): Pass stage1_args to sub-makes.
(all-stage[+id+]-[+prefix+][+module+]): Likewise, if prev is false.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, if prev is false.
(host_modules): Set stage1_args to STAGE1_FLAGS_TO_PASS.
* Makefile.in: Regenerate.
* configure.ac (have_static_libs): New variable and associated check.
(stage1-ldflags): Move to after stage1_libs and set to -static-libstdc++
-static-libgcc if stage1_libs is empty and have_static_libs is yes.
* configure: Regenerate.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch.
* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.in: Regenerate.
* configure.ac (ENABLE_BUILD_WITH_CXX): Remove. Update all users.
Force C++ when bootstrapping.
* configure: Regenerate.
2012-07-06 Richard Guenther <rguenther@suse.de>
* Makefile.def (cloog): Pass $(HOST_GMPINC) and $(HOST_ISLINC)
as CPPFLAGS, pass path to built gmp as LDFLAGS, always use
--with-gmp=system.
* Makefile.in: Regenerated.
* configure: Likewise.
2012-07-06 Richard Guenther <rguenther@suse.de>
* configure.ac (extra_isl_gmp_configure_flags): Initialize and subst.
* Makefile.def (isl): Use extra_isl_gmp_configure_flags and
supply V=1 as extra_make_flags.
* configure: Regenerated.
* Makefile.in: Likewise.
2012-07-03 Richard Guenther <rguenther@suse.de>
* Makfile.def (isl): Remove not necessary extra_exports and
extra_make_flags.
(cloog): Use $$CPPFLAGS instead of ${CPPFLAGS}.
* Makefile.in: Regenerated.
2012-07-03 Richard Guenther <rguenther@suse.de>
* Makefile.def (cloog): Add V=1 to extra_make_flags.
* configure.ac: If either the ISL or the CLooG check failed
do not try to build in-tree versions.
* Makefile.in: Regenerated.
* configure: Regenerated.
2012-07-02 Richard Guenther <rguenther@suse.de>
Michael Matz <matz@suse.de>
Tobias Grosser <tobias@grosser.es>
Sebastian Pop <sebpop@gmail.com>
* Makefile.def: Add ISL host module, remove PPL host module.
Adjust ClooG host module to use the proper ISL.
* Makefile.tpl: Pass ISL include flags instead of PPL ones.
* configure.ac: Include config/isl.m4. Add ISL host library,
remove PPL. Remove PPL configury, add ISL configury, adjust
ClooG configury.
* Makefile.in: Regenerated.
* configure: Likewise.
2012-07-02 Richard Guenther <rguenther@suse.de>
Merge from graphite branch
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* config/cloog.m4: Remove support for CLooG-ppl and CLooG-parma,
both cloog.org and legacy versions. The only supported version will
be CLooG with the isl backend.
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* configure.ac: Require cloog isl 0.17.0
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* config/cloog.m4: Do not define CLOOG_ORG
2012-06-29 Steven Bosscher <steven@gcc.gnu.org>
* configure.ac: Skip C if explicitly selected.
* configure: Regenerate.
2012-06-28 Christophe Lyon <christophe.lyon@st.com>
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Make sure
they contain -O2.
* configure: Regenerate.
2012-06-20 Jason Merrill <jason@redhat.com>
* Makefile.tpl (check-target-libgomp-c++): New.
(check-target-libitm-c++): New.
* Makefile.def (c++): Add them.
* Makefile.in: Regenerate.
2012-05-16 Olivier Hainque <hainque@adacore.com>
* Makefile.tpl (gcc-no-fixedincludes): Rename into ...
(gcc-install-no-fixedincludes): Now forwarder to local target in gcc/
(install-no-fixedincludes): Adjust accordingly.
* Makefile.in: Regenerate.
2012-05-09 Nick Clifton <nickc@redhat.com>
Paul Smith <psmith@gnu.org>
PR bootstrap/50461
* configure.ac (mpfr-dir): When using in-tree MPFR sources
allow for the fact that from release v3.1.0 of MPFR the source
files were moved into a src sub-directory.
* configure: Regenerate.
2012-05-07 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Bump minimum MPFR version to 2.4.0.
* configure: Regenerated.
2012-05-01 Richard Henderson <rth@redhat.com>
* Makefile.def (libatomic): New target_module.
* configure.ac (target_libraries): Add libatomic.
(noconfigdirs): Check if libatomic is supported.
* Makefile.in, configure: Rebuild.
config/
2012-08-26 Art Haas <ahaas@impactweather.com>
* cloog.m4 (CLOOG_INIT_FLAGS): Use = instead of == in test.
2012-07-04 Tristan Gingold <gingold@adacore.com>
* isl.m4 (ISL_CHECK_VERSION): Set to yes if cross-compiling.
Fix comments.
2012-07-03 Richard Guenther <rguenther@suse.de>
* cloog.m4: Remove debugging print.
2012-07-03 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* isl.m4 (ISL_CHECK_VERSION): Add -lisl to LIBS, not LDFLAGS.
2012-07-02 Richard Guenther <rguenther@suse.de>
* isl.m4 (_ISL_CHECK_CT_PROG): Omit main function header/footer.
Fix version test.
2012-07-02 Richard Guenther <rguenther@suse.de>
Michael Matz <matz@suse.de>
Tobias Grosser <tobias@grosser.es>
Sebastian Pop <sebpop@gmail.com>
* cloog.m4: Set up to work against ISL only.
* isl.m4: New file.
2011-07-26 Ian Lance Taylor <iant@google.com>
* configure.ac: Set have_compiler based on whether gcc directory
exists, rather than on whether gcc is in configdirs.
* configure: Rebuild.
2011-07-20 David Edelsohn <dje.gcc@gmail.com>
* Makefile.tpl (POSTSTAGE1_CONFIGURE_FLAGS): Add libsupc++ to
link directories.
* Makefile.in: Rebuild.
2011-07-20 Ian Lance Taylor <iant@google.com>
PR bootstrap/49787
* configure.ac: Move --enable-bootstrap handling earlier in file.
If --enable-bootstrap and either --enable-build-with-cxx or
--enable-build-poststage1-with-cxx, enable C++ automatically.
* configure: Rebuild.
2011-07-19 Ian Lance Taylor <iant@google.com>
* configure.ac: Add --enable-build-poststage1-with-cxx. If set,
make C++ a boot_language. Set and substitute
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.tpl (POSTSTAGE1_CONFIGURE_FLAGS): New variable.
(STAGE[+id+]_CONFIGURE_FLAGS): Add $(POSTSTAGE1_CONFIGURE_FLAGS).
* configure, Makefile.in: Rebuild.
2011-07-16 Jason Merrill <jason@redhat.com>
* Makefile.def (language=c++): Add check-c++0x and
check-target-libmudflap-c++.
* Makefile.tpl (check-target-libmudflap-c++): New.
* Makefile.in: Regenerate.
2011-07-16 Matthias Klose <doko@ubuntu.com>
* Makefile.tpl (EXTRA_CONFIGARGS_LIBJAVA): Define.
* Makefile.def (target_modules/libjava): Pass
$(EXTRA_CONFIGARGS_LIBJAVA).
* configure.ac: Pass --disable-static in EXTRA_CONFIGARGS_LIBJAVA,
if not configured with --enable-static-libjava.
* Makefile.in: Regenerate.
* configure: Likewise.
2011-06-22 Hans-Peter Nilsson <hp@axis.com>
PR regression/47836
PR bootstrap/23656
PR other/47733
PR bootstrap/49247
PR c/48825
* configure.ac (target_libraries): Remove target-libiberty.
Remove case-statement setting skipdirs=target-libiberty for
multiple targets. Remove checking target_configdirs and
removing target-libiberty but keeping target-libgcc if
otherwise empty.
* Makefile.def (target_modules): Don't add libiberty.
(dependencies): Remove all traces of target-libiberty.
* configure, Makefile.in: Regenerate.
/:
Sync from GCC:
2011-02-12 Alexandre Oliva <aoliva@redhat.com>
PR lto/47225
* Makefile.def (lto-plugin): Double dash for enable-shared.
(configure-gcc): Depend on all-lto-plugin.
* Makefile.in: Rebuilt.
2011-02-11 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* configure.ac: Remove extra bracket.
* configure: Regenerate.
2011-02-06 Kai Tietz <kai.tietz@onevision.com>
PR lto/47225
* Makefile.def: Add dependency for install-gcc
on install-lto-plugin.
* Makfile.in: Regenerated
2011-01-25 Jakub Jelinek <jakub@redhat.com>
* configure.ac: If with_ppl is no, move setting with_cloog=no
after CLOOG_REQUESTED check.
* configure: Regenerated.
2011-01-25 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Call AC_MSG_ERROR when PPL 0.11 is not present and
CLooG has been requested.
* configure: Regenerated.
2011-01-25 Sebastian Pop <sebastian.pop@amd.com>
* configure: Regenerated.
* configure.ac: Check for version 0.11 (or later revision) of PPL.
2011-01-25 Tobias Grosser <grosser@fim.uni-passau.de>
* configure: Regenerated.
* configure.ac: Use CLOOG_CHECK_VERSION(0,16,1).
2011-01-07 Jan Hubicka <jh@suse.cz>
PR lto/47225
* Makefile.in: Regenerate.
* Makefile.def (lto-plugin): Always pass enable-shared to the plugin
configure.
config/:
2011-01-25 Jakub Jelinek <jakub@redhat.com>
* cloog.m4 (CLOOG_REQUESTED): Use $2 if --without-cloog.
2011-01-10 Jan Hubicka <jh@suse.cz>
* bootstrap-lto.mk: -fuse-linker-plugin is default now;
pass -fno-lto to STAGEprofile.
/:
PR other/46202
* configure.ac: Fix just-built in-tree STRIP name to be
binutils/strip-new.
* configure: Regenerate.
* Makefile.def (install-strip-gcc, install-strip-binutils)
(install-strip-opcodes, install-strip-ld, install-strip-itcl)
(install-strip-sid): Mirror dependencies on non-strip variants
of these targets on the respective -strip prerequisites.
* Makefile.tpl (install-strip, install-strip-host)
(install-strip-target): New targets.
(install-strip-[+module+], install-strip-target-[+module+]):
New targets.
* Makefile.in: Regenerate.
etc/:
* Makefile.in (install-strip): New target.
libiberty/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(install): Also mark as phony.
