Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
I exposed a problem with the change in commit 574ec1084d to the outer
loop of _bfd_elf_parse_attributes. "p_end - p >= 4" is better than
"p < p_end - 4" as far as pointer UB is concerned if the size of the
attritbute section is say, 3 bytes. However you do need to ensure p
never exceeds p_end, and that length remaining is kept consistent with
the pointer.
* elf-attrs.c (elf_attr_strdup): New function.
(_bfd_elf_attr_strdup): Use it here.
(elf_add_obj_attr_string): New function, extracted from..
(bfd_elf_add_obj_attr_string): ..here.
(elf_add_obj_attr_int_string): New function, extracted from..
(bfd_elf_add_obj_attr_int_string): ..here.
(_bfd_elf_parse_attributes): Don't allocate an extra byte for a
string terminator. Instead ensure parsing doesn't go past
end of sub-section. Use size_t variables for lengths.
This patch is aimed at the many places in dwarf2.c that blindly
increment a data pointer after calling functions that are meant to
read a fixed number of bytes. The problem with that is with damaged
dwarf we might increment a data pointer past the end of data, which is
UB and complicates (ie. bugs likely) any further use of that data
pointer. To fix those problems, I've moved incrementing of the data
pointer into the functions that do the reads. _bfd_safe_read_leb128
gets the same treatment for consistency.
* libbfd.c (_bfd_safe_read_leb128): Remove length_return parameter.
Replace data pointer with pointer to pointer. Increment pointer
over bytes read.
* libbfd-in.h (_bfd_safe_read_leb128): Update prototype.
* elf-attrs.c (_bfd_elf_parse_attributes): Adjust to suit. Be
careful not to increment data pointer past end. Remove now
redundant pr17512 check.
* wasm-module.c (READ_LEB128): Adjust to suit changes to
_bfd_safe_read_leb128.
* dwarf2.c (read_n_bytes): New inline function, old one renamed to..
(read_blk): ..this. Allocate and return block. Increment bfd_byte**
arg.
(read_3_bytes): New function.
(read_1_byte, read_1_signed_byte, read_2_bytes, read_4_bytes),
(read_8_bytes, read_string, read_indirect_string),
(read_indirect_line_string, read_alt_indirect_string): Take a
byte_byte** arg which is incremented over bytes read. Remove any
bytes_read return. Rewrite limit checks to compare lengths
rather than pointers.
(read_abbrevs, read_attribute_value, read_formatted_entries),
(decode_line_info, find_abstract_instance, read_ranges),
(read_rnglists, scan_unit_for_symbols, parse_comp_unit),
(stash_comp_unit): Adjust to suit. Rewrite limit checks to
compare lengths rather than pointers.
* libbfd.h: Regenerate.
2019-01-16 Kito Cheng <kito@andestech.com>
bfd/
* elf-attrs.c (vendor_obj_attr_size): Return 0 if size is 0 even
for OBJ_ATTR_PROC.
gas/
* testsuite/gas/riscv/attribute-empty.d: New.
.gnu.attributes entries from linker input files are merged to the
output file, the output having the union of compatible input
attributes. Incompatible attributes generally cause a linker error
and no output. However in some cases only a warning is emitted, and
one of the incompatible input attributes is passed on to the output.
PowerPC tends to emit warnings rather than errors, and the output
takes the first input attribute. For example, if we have two input
files with Tag_GNU_Power_ABI_FP, the first with a value signifying
"double-precision hard float, IBM long double", the second with a
value signifying "double-precision hard float, IEEE long double",
we'll get a warning about incompatible long double types and the
output will say "double-precision hard float, IBM long double".
The output attribute of course isn't correct. It would be correct to
specify "IBM and IEEE long double", but we don't have a way to
represent that currently. While it would be possible to extend the
encoding, there isn't much gain in doing so. A shared library
providing support for both long double types should link against
objects using either long double type without warning or error. That
is what you'd get if such a shared library had no Tag_GNU_Power_ABI_FP
attribute.
So this patch provides a way for the backend to omit .gnu.attributes
tags from the output.
* elf-bfd.h (ATTR_TYPE_FLAG_ERROR, ATTR_TYPE_HAS_ERROR): Define.
* elf-attrs.c (is_default_attr): Handle ATTR_TYPE_HAS_ERROR.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Use
ATTR_TYPE_FLAG_INT_VAL. Set ATTR_TYPE_HAS_ERROR on finding
incompatible attribute.
(ppc_elf_merge_obj_attributes): Likewise. Return
_bfd_elf_merge_object_attributes result.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Return
_bfd_elf_merge_object_attributes result.
PR 22809
* elf.c (bfd_elf_get_str_section): Check for an excessively large
string section.
* elf-attrs.c (_bfd_elf_parse_attributes): Issue an error if the
attribute section is larger than the size of the file.
PR 21916
* elf-attrs.c (_bfd_elf_parse_attributes): Complain about very
small section lengths.
* elf.c (_bfd_elf_setup_sections): Skip empty entries in the group
table.
(elfcore_grok_freebsd_prstatus): Add checks to make sure that
there is enough data present in the note.
Give these bfd-internal symbols with external linkage a _bfd_ prefix
to avoid collisions in the global symbol namespace.
bfd/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* dwarf2.c, elf-attrs.c, elf32-nds32.c: Adjust all callers.
* libbfd.c (read_unsigned_leb128): Rename to ...
(_bfd_read_unsigned_leb128): ... this.
(read_signed_leb128): Rename to ...
(_bfd_read_signed_leb128): ... this.
(safe_read_leb128): Rename to ...
(_bfd_safe_read_leb128): ... this.
* libbfd-in.h (read_unsigned_leb128): Rename to ...
(_bfd_read_unsigned_leb128): ... this.
(read_signed_leb128): Rename to ...
(_bfd_read_signed_leb128): ... this.
(safe_read_leb128): Rename to ...
(_bfd_safe_read_leb128): ... this.
* libbfd.h: Renegerate.
PR binutils/17512
* objdump.c (display_any_bfd): Avoid infinite loop closing and
opening the same archive again and again.
* archive64.c (bfd_elf64_archive_slurp_armap): Add range checks.
* libbfd.c (safe_read_leb128): New function.
* libbfd-in.h (safe_read_leb128): Add prototype.
* libbfd.h: Regenerate.
* elf-attrs.c (_bfd_elf_parse_attributes): Use safe_read_leb128.
Check for an over-long subsection length.
* elf.c (elf_parse_notes): Check that the namedata is long enough
for the string comparison that is about to be performed.
(elf_read_notes): Zero-terminate the note buffer.
PR binutils/17512
* dwarf.h (struct dwarf_section): Add user_data field.
* dwarf.c (frame_need_space): Check for an over large register
number.
(display_debug_frames): Check the return value from
frame_need_space. Check for a CFA expression that is so long the
start address wraps around.
(debug_displays): Initialise the user_data field.
* objdump.c (load_specific_debug_section): Save the BFD section
pointer in the user_data field of the dwarf_section structure.
(free_debug_section): Update BFD section data when freeing section
contents.
* readelf.c (load_specific_debug_section): Initialise the
user_data field.
* archive.c (do_slurp_coff_armap): Add range checks to prevent
running off the end of the string table.
* compress.c (bfd_get_full_section_contents): Return a NULL
pointer for zero sized sections. Do not attempt to copy a buffer
onto itself.
* elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty
header. Add range checks to avoid running off the end of the
section.
* elf.c (bfd_elf_get_str_section): Seek before allocating so that
if the seek fails, no memory is allocated.
(bfd_elf_string_from_elf_section): Do not allocate a string from a
non string section. It only leads to trouble later on.
(_bfd_elf_print_private_bfd_data): Check for there being too
little external dynamic data.
(bfd_section_from_shdr): Replace assertion with a failure mode.
(bfd_section_from_shdr): When walking a loaded group section use
the internal structure size, not the external size. Check for the
group section being empty.
* elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a
failure mode.
* elfcode.h (elf_slurp_reloc_table): Likewise.
* reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto
parameter is NULL.
Handle the case of a zero length section or sub-section in
_bfd_elf_parse_attributes and in doing so prevent an infinite loop
in the parser.
bfd/ChangeLog:
2014-11-06 Will Newton <will.newton@linaro.org>
* elf-attrs.c (_bfd_elf_parse_attributes): Handle zero
length sections and sub-sections.
(struct elf_backend_data): Update comment on obj_attrs_order.
* elf-attrs.c (vendor_obj_attr_size, vendor_set_obj_attr_contents,
_bfd_elf_copy_obj_attributes): Use LEAST_KNOWN_OBJ_ATTRIBUTE
instead of hardcoded 4.
* elf32-arm.c (elf32_arm_obj_attrs_order): Use
LEAST_KNOWN_OBJ_ATTRIBUTE and LEAST_KNOWN_OBJ_ATTRIBUTE + 1
instead of hardcoded 4 and 5.
(elf32_arm_merge_eabi_attributes): Use LEAST_KNOWN_OBJ_ATTRIBUTE
instead of hardcoded 4.
bfd/
* elf-attrs.c (is_default_attr): Support defaultless attributes.
(bfd_elf_add_obj_attr_int): Get type from _bfd_elf_obj_attrs_arg_type.
(bfd_elf_add_obj_attr_string): Likewise.
(bfd_elf_add_obj_attr_int_string): Likewise.
(_bfd_elf_parse_attributes): Allow for unknown flag bits in type.
* elf-bfd.h (struct obj_attribute): Document new flag bit.
* elf32-arm.c (elf32_arm_obj_attrs_arg_type): Specify that
Tag_nodefaults has no default value.
(elf32_arm_merge_eabi_attributes): Modify the Tag_nodefaults
comment to reflect the new state.
gas/
* read.c (s_vendor_attribute): Allow for unknown flag bits in type.
bfd/
* elf-attrs.c (bfd_elf_add_obj_attr_compat): Rename to
bfd_elf_add_obj_attr_int_string.
Read Tag_compatibility from its new location in the attribute array,
rather than the attribute list.
(_bfd_elf_copy_obj_attributes): bfd_elf_add_obj_attr_compat ->
bfd_elf_add_obj_attr_int_string.
(_bfd_elf_parse_attributes): Likewise.
(_bfd_elf_merge_object_attributes): There's now only one
Tag_compatibility, and it's in the array, not the list.
* elf-bfd.h (NUM_KNOWN_OBJ_ATTRIBUTES): Set to 33 to include
Tag_compatibility.
(bfd_elf_add_obj_attr_compat): Rename to
bfd_elf_add_obj_attr_int_string.
(bfd_elf_add_proc_attr_compat): Rename to
bfd_elf_add_proc_attr_int_string.
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Explicitly don't handle
Tag_compatibility.
gas/
* read.c (s_vendor_attribute): bfd_elf_add_obj_attr_compat ->
bfd_elf_add_obj_attr_int_string.
