Copy most of the common build warning logic over from the common
code to help keep code behavior a bit consistent, and turn them
on by default. We disable a few flags for now until we can clean
the code up.
Use the same basic names as the common sim inline logic so we can
merge the two. We don't do that here, just prepare for it.
The common code seems to be based on the ppc version but with slightly
different names as it was cleaned up & generalized. I *think* these
concepts are the same, so binding them together is OK, but maybe I'm
misreading them. If so, can always tweak them later.
REVEAL_MODULE -> H_REVEALS_MODULE
INLINE_MODULE -> C_REVEALS_MODULE
Move these options up to the common dir so we only test & export
them once across all ports. It also enables -Werror usage on the
common files we've been pulling out of arch subdirs.
As we merge settings from subdirs into the common configure, we
sometimes need to keep the settings working in both dirs. Create
a makefile fragment to pass them down so we don't have to run the
checks twice. For now, the file is empty, but we'll start moving
logic in shortly.
The sim-basics.h is too big and includes too many things. This leads
to some arch's sim-main.h having circular loop issues with defs, and
makes it hard to separate out common objects from arch-specific defs.
By splitting up sim-basics.h and killing off sim-main.h, it'll make
it easier to separate out the two.
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
This define is used for a particular target and depends on the
simulated CPU hardware. It has no relation to the host CPU that
the sim is running on. So rename the common "PAGE_SIZE" here to
better reflect its usage and avoid conflicts with system headers.
Rather than re-invent endian defines, as well as maintain our own list
of OS & arch-specific includes, punt all that logic in favor of the bfd
ones already set up and maintained elsewhere. We already rely on the
bfd library, so leveraging the endian aspect should be fine.
This was done for all the other ports years ago, so catch ppc up.
The --enable-sim-hostendian flag was purely so people had an escape route
for when cross-compiling. This is because historically, AC_C_BIGENDIAN
did not work in those cases. That was fixed a while ago though, so we can
require that macro everywhere now and simplify a good bit of code.
This was done for all the other ports years ago, so catch ppc up.
Currently, the sim-config module will abort if alignment settings
haven't been specified by the port's configure.ac. This is a bit
weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's
optional to use. Thus everyone invokes it.
There are 4 alignment settings, but really only 2 matters: strict
and nonstrict. The "mixed" setting is just the default ("unset"),
and "forced" isn't used directly by anyone (it's available as a
runtime option for some ports).
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, then the
build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't
called). If default settings are provided, then that is used, but
we allow the user to override at runtime. Otherwise, the "wire"
settings are used and user runtime options to change are ignored.
Most ports specify a default, or set the "wire" to nonstrict. A
few set "wire" to strict, but it's not clear that's necessary as
it doesn't make the code behavior, by default, any different. It
might make things a little faster, but we should provide the user
the choice of the compromises to make: force a specific mode at
compile time for faster runtime, or allow the choice at runtime.
More likely it seems like an oversight when these ports were
initially created, and/or copied & pasted from existing ports.
With all that backstory, let's get to what this commit does.
First kill off the idea of a compile-time default alignment and
set it to nonstrict in the common code. For any ports that want
strict alignment by default, that code is moved to sim_open while
initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be
completely removed.
Moving the default alignment to the runtime also allows removal
of setting the "wire" settings at configure time. Which allows
removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving
that call to common code.
The macro logic can be reworked to not pass WITH_ALIGNMENT as -D
CPPFLAG and instead move it to config.h.
All of these taken together mean we can hoist the macro up to the
top level and share it among all sims so behavior is consistent
among all the ports.
Move these options up to the common dir so we only test & export
them once across all ports. The AC_INIT macro does a lot of the
heavy lifting already which allows further simplification.
Move these options up to the common dir so we only test & export
them once across all ports.
The ppc code needs a little extra care with its trace settings as
it's not exactly the same API as the common code. The other knobs
are the same though.
Since ppc now shares a config.h with the top-level, move all of its
relevant settings up a level. The ppc port tests a lot more funcs,
but that's because its syscall emulation is a lot more complete.
We'll probably utilize some of these in the common code too.
The ppc port doesn't share a lot of the common logic, but there are
a few bits that bleed across. Have it use the common configure for
environment settings too to avoid duplicate define errors after the
recent unification with the other ports.
If the OS headers define the "errno" symbol, it breaks some of these
funcs that were using "int errno" itself. Rename local vars to "err"
to avoid that, and delete the old "extern int errno".
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/hw_memory.c: In function 'hw_memory_init_address':
src/sim/ppc/hw_memory.c:194:75: error: pointer targets in passing \
argument 4 of 'device_find_integer_array_property' differ in signedness \
[-Werror=pointer-sign]
int nr_cells
= device_find_integer_array_property(me, "available", 0, &dummy);
^
...
Fix this by changing the type of dummy.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/hw_phb.c: In function 'hw_phb_attach_address':
src/sim/ppc/hw_phb.c:315:12: error: comparison between \
'attach_type {aka enum _attach_type}' and \
'enum <anonymous>' [-Werror=enum-compare]
if (type != hw_phb_normal_decode
^~
...
Fix this by casting type to hw_phb_decode.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/emul_netbsd.c: In function 'do_gettimeofday':
src/sim/ppc/emul_netbsd.c:770:16: error: null argument where non-null \
required (argument 1) [-Werror=nonnull]
int status = gettimeofday((t_addr != 0 ? &t : NULL),
^~~~~~~~~~~~
...
Fix this by unconditionally passing &t as first argument.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
In file included from src/sim/ppc/cpu.h:26:0,
from src/sim/ppc/mon.c:25,
from src/sim/ppc/inline.c:64,
from idecode.c:26:
src/sim/ppc/device.h:788:8: error: 'device_event_queue_deschedule' \
declared 'static' but never defined [-Werror=unused-function]
(void) device_event_queue_deschedule
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
This seems to be caused by the fact that the function is declared using
INLINE_EVENT instead of INLINE_DEVICE.
Fix this and a similar error in the same file.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
In file included from src/sim/ppc/cpu.h:251:0,
from src/sim/ppc/emul_generic.h:24,
from src/sim/ppc/emul_generic.c:24:
src/sim/ppc/cpu.c:76:1: error: 'cpu_create' defined but not used \
[-Werror=unused-function]
cpu_create(psim *system,
^~~~~~~~~~
...
The function is defined as:
...
INLINE_CPU\
(cpu *)
cpu_create(psim *system,
...
which expands to:
...
static cpu * __attribute__((__unused__))
cpu_create(psim *system,
...
The problem is that gcc does not associate the attribute to the function.
I've filed a PR about this ( PR gcc/100670 ), which may or may not be valid.
Work around/fix this by modifying the INLINE_* definitions in inline.h to move
UNUSED to the start such that we have:
...
__attribute__((__unused__)) static cpu *
cpu_create(psim *system,
...
The defs.h header will take care of including the various config.h
headers. For now, it's just config.h, but we'll add more when we
integrate gnulib in.
This header should be used instead of config.h, and should be the
first include in every .c file. We won't rely on the old behavior
where we expected files to include the port's sim-main.h which then
includes the common sim-basics.h which then includes config.h. We
have a ton of code that includes things before sim-main.h, and it
sometimes needs to be that way. Creating a dedicated header avoids
the ordering mess and implicit inclusion that shows up otherwise.
A random grab bag of minor fixes to enable -Werror for this port.
Cast address vars to long when the format was using %l.
Use %zu with sizeof operations.
Add const to a bunch of strings.
Trim unused variables.
Fix sizeof call to calculate target storage and not the pointer itself.
The gdb/callback.h & gdb/remote-sim.h headers have nothing to do with
gdb and are really definitions for the libsim API under the sim/ tree.
While gdb uses those headers as a client, it's not specific to it. So
create a new sim/ namespace and move the headers there.
This changes the sim/ppc Makefile to use the stamp file idiom for a
couple of generated files, avoiding extra rebuilds.
sim/ppc/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (stamp-vals, stamp-map): New targets.
(targ-vals.h, targ-map.c): Update.
(clean): Remove files.
This updates various parts of the sim to include missing system
headers. I made the includes unconditional, because other parts of
the tree are already doing this.
2021-04-08 Tom Tromey <tom@tromey.com>
* traps.c: Include stdlib.h.
* cris-tmpl.c: Include stdlib.h.
sim/erc32/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* func.c: Include sys/time.h.
sim/frv/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* traps.c: Include stdlib.h.
* registers.c: Include stdlib.h.
* profile.c: Include stdlib.h.
* memory.c: Include stdlib.h.
* interrupts.c: Include stdlib.h.
* frv.c: Include stdlib.h.
* cache.c: Include stdlib.h.
sim/iq2000/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* iq2000.c: Include stdlib.h.
sim/m32r/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* traps.c: Include stdlib.h.
* m32r.c: Include stdlib.h.
sim/ppc/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* emul_unix.c: Include time.h.
The igen/dgen and opc2c tools leak their heap-allocated memory (on
purpose) at program exit, which makes AddressSanitizer fail the tool
execution. This breaks the build, as it makes the tool return a
non-zero exit code.
Fix that by disabling leak detection through the setting of that
environment variable.
I also changed the opc2c rules for m32c to go through a temporary file.
What happened is that the failing opc2c would produce an incomplete file
(probably because ASan exits the process before stdout is flushed).
This meant that further make attempts didn't try to re-create the file,
as it already existed. A "clean" was therefore necessary. This can
also happen in regular builds if the user interrupts the build (^C) in
the middle of the opc2c execution and tries to resume it. Going to a
temporary file avoids this issue.
sim/m32c/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running opc2c.
sim/mips/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/mn10300/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/ppc/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/v850/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
Change-Id: I00f21d4dc1aff0ef73471925d41ce7c23e83e082
This doesn't actually create one `run` program like other projects,
but creates multiple `run-$arch` targets. While it might not seem
that useful initially, this has some nice properties:
- Allows us to quickly build all sim targets in a single tree.
- Positions us better for converting targets over to a proper
multitarget build+install.
We don't have the ability to actually run tests against them, but
that's due to a limitation in gas: it doesn't support multitarget.
If that ever changes, we should be able to turn on our tests too.
We can improve the test framework to fallback to a system toolchain
if available to help mitigate that.
These use the same pattern as seen in the opcodes/ dir and in automake
in general (ish). This helps simplify the boilerplate for building and
linking build-time code, and fixes some inconsistency in flag usage.
For rules that were compiling+linking in a single step, split them into
separate steps so we can apply the correct set of options. This matches
automake behavior too.
This hasn't been initialized anywhere for years. It used to be for
passing in the path to libiberty, but that stopped happening long ago.
Delete it to simplify the build logic.
This file is quite large and is getting unmanageable. Split it apart
to follow aclocal best practices by putting one-macro-per-file. There
shouldn't be any real functional changes here as can be seen in the
configure script regens.
Rather than hand maintain m4 includes in various autotool files,
use AC_CONFIG_MACRO_DIRS to declare the relevant search paths.
This simplifies the code, makes it more robust, and cleans out
unused logic from configure.
These settings might have made sense in darker compiler times, but I
think they're largely obsolete now. Looking through the values that
get used in HDEFINES, it's quite limited, and configure itself should
handle them. If we still need something, we can leverage standard
autoconf macros instead, after we get a clear user report.
TDEFINES was never set anywhere and was always empty, so prune that.
Since we require C11 now, we can assume many headers exist, and
clean up all of the conditional includes. It's not like any of
this code actually accounted for the headers not existing, just
whether we could include them.
The strings.h cleanup is a little nuanced: it isn't in C11, but
every use of it in the codebase will include strings.h only if
string.h doesn't exist. Since we now assume the C11 string.h
exists, we'll never include strings.h, so we can delete it.
We don't want arch-specific entries in the common ChangeLog files.
Most arches do this already, so clean up the recent additions, and
move some older entries down to help avoid confusing newcomers.
Make sure the files using atoi() include stdlib.h for its prototype.
These files were relying on it being included implicitly by others
which isn't guaranteed, and newer toolchains produce warnings.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
bfd * po/es.po: Fix printf format
binutils * windmc.c: Fix printf format
gas * config/tc-arc.c: Fix printf format
opcodes * po/es.po: Fix printf format
sim * arm/armos.c: Fix printf format
* ppc/emul_netbsd.c: Fix printf format
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
GCC 10 enables -fno-common by default. This resulted in a multiple
definition linker error since global variables were declared and defined
in a header file:
ld: ld-insn.o:sim/ppc/ld-insn.h:221: multiple definition of
`max_model_fields_len'; igen.o:sim/ppc/ld-insn.h:221: first defined here
sim/ppc
* ld-insn.h (last_model, last_model_data, last_model_function,
last_model_internal, last_model_macro, last_model_static):
Delete.
(max_model_fields_len, model_data, model_functions,
model_internal, model_macros, model_static, models): Declare, but do not
define.
* ld-insn.c (last_model, last_model_data, last_model_function,
last_model_internal, last_model_macro, last_model_static,
max_model_fields_len, model_data, model_functions,
model_internal, model_macros, model_static, models): Define.
PR build/24572 notes that "make install-strip" fails. For me, it
works in every directory except "sim", so this patch adds
install-strip targets to the Makefiles that appear there.
sim/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
sim/common/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
sim/igen/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
sim/ppc/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
sim/testsuite/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
Change-Id: I76613bc5c7e7812284f33826f8a5d914477fcdc5
Simon pointed out that the "common/" include change in gdb broke the
sim build. The problem was that the sim was using gdb's
create-version.sh, which changed.
This patch copies create-version.sh to the sim, so that it can
generate "version.c" in a way that works in the sim build.
Tested by rebuilding.
sim/common/ChangeLog
2019-01-26 Tom Tromey <tom@tromey.com>
* Make-common.in (version.c): Use sim's create-version.sh.
* create-version.sh: New file.
sim/ppc/ChangeLog
2019-01-26 Tom Tromey <tom@tromey.com>
* Makefile.in (version.c): Use sim's create-version.sh.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
Previously this used the error function from GDB directly when linked
against GDB instead of the error method in the host callbacks
structure. This was exposed via a link error when GDB was converted
to C++. The error function invokes the error callback similar to
sim_io_error.
Note that there are also error functions in sim/ppc/main.c and
sim/ppc/misc.c. The ppc libsim.a expects each consumer to provide
several symbols used by the library including "error". sim-calls.c
provides these symbols when the library is linked into gdb. The dgen,
igen, tmp-filter, tmp-ld-decode, tmp-ld-cache, and tmp-ld-insn programs
use the functions from misc.c. psim uses the functions from main.c.
sim/ppc/ChangeLog:
PR sim/20863
* sim_calls.c (error): New function.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Rather than stuffing the command line with a bunch of -D flags, start
moving things to config.h which is managed by autoheader. This makes
the makefile a bit simpler and the build output tighter, and it makes
the migration to automake easier as there are fewer vars to juggle.
We'll want to move the other options out too, but it'll take more work.
This was imported from the ppc sim, but that was only used to control
a single file, and that is already governed by the hw models. There's
no need to have a sep configure option here, especially since none of
the other sims are using it. Even when the code is enabled, there's
no runtime overhead.
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order
to make the configure flag available. There's no real reason to not
allow this flag for all ports, so move it to the common sim macro.
This way we get standard behavior across all ports too.
These options were never exposed for most sims (just the ppc one),
and they are really only useful on 32-bit x86 systems. Considering
modern systems tend to be 64-bit x86_64 and how well modern compilers
are at optimizing code, these have outlived their usefulness.
No other sub directory provides such a configuration option, so
drop it from the sim dir as well. This cleans up a good bit of
code in the process.
If people want to use custom flags for just the sim, they can
still run configure+make by hand in the sim subdir and use the
normal CFLAGS settings.
The compiler/C library should produce reasonable code for htonl/ntohl,
and at least glibc tries pretty hard to always produce good code for
them. This logic only had support for 32-bit x86 systems anymore, and
it's unlikely people were even opting into this, so drop it all.
When connecting to the simulator in gdb, we don't want it to exit on
us when we pass down unknown/invalid/help/etc... options. Plumb down
the kind argument so we can handle both gdb & psim interfaces.
This change tracks the "closed" state of file descriptors 0, 1, and 2,
introducing the function fdbad() to emul_netbsd.c and emul_unix.c.
Note that a function of the same name and purpose exists in
sim/common/callback.c.
This patch eliminates all of the "unresolved testcases" when testing
GDB against the powerpc simulator.
This occurs because the powerpc simulator closes, on behalf of the
testcase, the file descriptors associated with stdin, stdout, and
stderr. GDB still needs these descriptors to communicate with the
user or, in this case, with the testing framework.
No arch is using this anymore, and we want all new ports using the
hardware framework instead. Punt WITH_DEVICES and the two callbacks
device_io_{read,write}_buffer.
We can also punt the tconfig.h file as no port is using it anymore.
This fixes in-tree builds that get confused by picking up the wrong
one (common/ vs <port>/) caused by commit ae7d0cac8c.
Any port that needs to set up a global define can use their own
sim-main.h file that they must provide regardless.
POSIX does not define $< behavior in ordinary rules, so avoid its use
to fix building on non-GNU make setups.
Reported-by: Christopher January <chris.january@allinea.com>
Building a gdb that includes the PPC sim in C++ mode fails to link with:
(...)s.o compile-object-load.o compile-object-run.o compile-loc2c.o compile-c-support.o inflow.o init.o \
../sim/ppc/libsim.a ../readline/libreadline.a ../opcodes/libopcodes.a ../bfd/libbfd.a -lz ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a -ldl -ldl -lncurses -lm -ldl -lguile-2.0 -lgc -lpthread -ldl -lutil -lm -lpython2.7 -Xlinker -export-dynamic -lexpat -llzma -lbabeltrace -lbabeltrace-ctf ../libiberty/libiberty.a build-gnulib/import/libgnu.a
../sim/ppc/libsim.a(sim_calls.o): In function `sim_open':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_close':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_load':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o):/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: more undefined references to `printf_filtered' follow
collect2: error: ld returned 1 exit status
The undefined references come from TRACE macro calls, which expand to
calls to printf_filtered.
But note that the sim's 'printf_filtered' is actually a #define to
'sim_io_printf_filtered', in sim_callbacks.h :
#define printf_filtered sim_io_printf_filtered
AFAICS, this is not meant to call gdb's printf_filtered function. The
ChangeLog entry that added the printf_filtered macro reads:
Tue Jul 30 21:12:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
* sim_callbacks.h (sim_io_printf_filtered): Replace
printf_filtered with a local simulator specific version. Add
#define printf_filtered to simplify updating of existing code.
That is, just another incomplete/partial transition. Maybe prior to
1996 this was really meant to call gdb's printf_filtered version.
The reference to printf_filtered appears because sim_calls.c, the
compilation unit that fails to link, has this at the top:
#undef printf_filtered /* blow away the mapping */
presumably so that this further below:
void
sim_io_printf_filtered(const char *fmt,
...)
{
(...)
callbacks->printf_filtered(callbacks, "%s", message);
}
works. So those TRACE macros instances in sim_calls.c just happen to
work because gdb is linked in, which satisfies the 'printf_filtered'
reference, when GDB is built in C mode. When built in C++ mode, the
problem is exposed, as GDB's printf_filtered is mangled.
The fix here is to make the TRACE macro call sim_io_printf_filtered
directly.
(Standalone "run" doesn't fail to link simply because the offending
routines are not part of its link.)
sim/ppc/ChangeLog
2015-11-17 Pedro Alves <palves@redhat.com>
* debug.h (TRACE, ITRACE, DTRACE, DITRACE, PTRACE): Call
sim_io_printf_filtered instead of printf_filtered.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
It is rare for people to want to modify the cmd arg. In general, they
really shouldn't be, but a few still do. For those who misbehave, dupe
the string locally so they can bang on it.
When cross-compiling GDB for PPC, there's a prerequisite "-lz" for psim
that results in a build failure. With such prerequisite, GNU Make will
try to search the library from build machine's /usr/lib which is wrong.
On 64-bit Linux build machines the compilation will fail because of this.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=12202
This reverts part of the earlier version.in change. It moves
version.in back to the gdb directory. This works around the CVS bug
we've found.
gdb
* Makefile.in (version.c): Use version.in, not
common/version.in.
* common/create-version.sh: Likewise.
* common/version.in: Move...
* version.in: ...here.
gdb/doc
* Makefile.in (version.subst): Use version.in, not
common/version.in.
* gdbint.texinfo (Versions and Branches, Releasing GDB):
Likewise.
gdb/gdbserver
* Makefile.in (version.c): Use version.in, not
common/version.in.
sim/common
* Make-common.in (version.c): Use version.in, not
common/version.in.
* create-version.sh: Likewise.
sim/ppc:
* Make-common.in (version.c): Use version.in, not
common/version.in.
This change is required now that gdb/version.in has been moved to
gdb/common/version.in and now that the date needs to be fetched
from bfd/version.h.
sim/common/ChangeLog:
* create-version.sh: New script. Adapted from
gdb/commong/create-version.sh.
* Make-common.in (version.c): Update rule dependencies,
and re-implement using create-version.sh.
sim/ppc/ChangeLog:
* Makefile.in (srccom): New variable.
(version.c): Update rule dependencies, and re-implement using
sim/common/create-version.sh.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
AIX 7.1 defines st_pad[123] to st_[amc]tim.tv_pad, respectively,
breaking declaration of st_pad[123] members in struct solaris_stat.
Undefine them as this is no less terrible than other solutions (like
renaming the fields and losing the binding to Solaris' names).
From: Michael Haubenwallner <haubi@s01en24.gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Fixes an error reported by Tristan and which can be evidenced by
doing:
% powerpc-elf-gdb
(gdb) target sim --sysroot=var
Invalid option: --sysroot=/var
[...]
sim/ppc/ChangeLog:
* psim.c (psim_options): Fix length of comparison when checking
for --sysroot= option.
This patch improves the error message when an invalid option is
detected, by also printing the option that actually caused the error.
For instance, from GDB:
(gdb) target sim --hello
Invalid option: --hello
Usage:
[...]
We also added the usage after an invalid long-name option (Eg: --hello)
to be in line with what's being done for all other invalid options
being detected.
sim/ppc/ChangeLog:
* psim.c (psim_options): Add option that cause the error
in invalid-option error messages. Print the usage when
detecting an invalid long-name option.
There was a recent change that cuased the "target sim" command
to add a --sysroot option to the argument vector passed down to
the simulator. This caused a failure in the powerpc simulator,
as it did not recognize it. This patch fixes the problem by adding
support for the --sysroot option (it ignores it).
sim/ppc/ChangeLog:
* psim.c (psim_options): Accept and ignore `--sysroot=...'.
For the ports that don't use the common/ subdir, we need to add stub funcs
to them to avoid build failures with gdb and command completion. These do
not implement the actual completion functionality ... any port that wants
that can either convert to the common/ subdir, or fill out the function on
their own time.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim keeps track of which allocations are zero-ed internally (via
zalloc) and then calls a helper "zfree" function rather than "free".
But this "zfree" function simply calls "free" itself. Since I can
see no point in this and it is simply useless overhead, punt it.
The only real change is in hw-alloc.c where we remove the zalloc_p
tracking, and sim-utils.c where zfree is delete. The rest of the
changes are a simple `sed` from "zfree" to "free".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.
As pointed out by Sandra Loosemore, a bunch of targets define sim_write
themselves instead of using the common/ code. So constify them too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* configure: Regenerated.
* configure.ac: Add test for System V shared memory and semaphore.
* debug.c, debug.h: Add trace support for new devices.
* hw_sem.c, hw_shm.c: New files.
* Makefile.in: Add hw_sem.c and hw_shm.c.
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* cris/configure: Regenerate.
sim/common:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* aclocal.m4: Include ../../config/acx.m4.
* common.m4: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerate.
* Make-common.in (LIB_OBJS): Add version.o.
(version.c, version.o): New rules.
* run.c: Include version.h.
(usage): Add help parameter. Print output either to stdout or
stderr depending on that parameter.
(print_version): New.
(main): Check for --help and --version.
* run-sim.h (sim_target_display_usage): Add help parameter.
* version.h: New.
sim/arm:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
* wrapper.c (sim_target_display_usage): Add help parameter.
sim/cr16:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/d10v:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/erc32:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/frv:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/h8300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/iq2000:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32c:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32r:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m68hc11:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mcore:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mips:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mn10300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/ppc:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerated.
* Makefile.in (LIB_OBJ): Add version.o.
(version.c, version.o): New rules.
* psim.c (psim_usage): Add help parameter. Print the bug URL.
Exit with code 0 for help.
(psim_options): Update calls to psim_usage. Handle --help and
--version.
* psim.h (psim_usage): Update prototype.
* main.c (main): Update psim_usage call.
sim/sh:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/sh64:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/v850:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim_resume. Expect target signal numbers from sim_stop_reason.
* wrapper.c (gdb/signals.h): Include it.
(SIGTRAP): Don't define.
(SIGBUS): Likewise.
(sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*.
* sim-reason.c (sim_stop_reason): Use
sim_signal_to_target, not sim_signal_to_host.
* sim-signal.c (sim_signal_to_host): Fix typo.
(sim_signal_to_target): New function.
* interp.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* interf.c: (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* sim_calls.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* psim.c (cntrl_c_simulation): Use TARGET_SIGNAL_*.
Committed by Andrew Cagney.
* configure.in: Check for sys/mount.h, sys/vfs.h, sys/statfs.h.
Check for struct statfs.
* emul_netbsd.c: If not HAVE_STRUCT_STATFS, #undef HAVE_FSTATFS.
* configure, config.in: Regenerate.
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
New functions.
(rs6000_gdbarch_init): Register rs6000_register_sim_regno. Call
init_sim_regno_table.
* Makefile.in (gdb_sim_ppc_h): New variable.
(rs6000-tdep.o): Update dependencies.
include/gdb/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
* sim-ppc.h: New file.
sim/ppc/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
include GDB's "defs.h".
(gdb_register_name_table): New variable.
(gdb_register_name_table_size): New enum constant.
(gdb_register_name): New function.
(sim_fetch_register, sim_store_register): Use gdb_register_name,
instead of calling gdbarch_register_name.
* Makefile.in (GDB_SIM_PPC_H): New variable.
(DEFS_H): Delete variable.
(sim_calls.o): Update dependencies.
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install-man, installdirs): Add DESTDIR prefix.
Index: ppc/ChangeLog
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install, installdirs): Add DESTDIR.
