This test checks code layout by function symbol ordering, but that
doesn't work on powerpc64 ELFv1 where the function symbol is on a
descriptor. A simple work-around is to have nm emit synthetic symbols
marking the code entry point of functions. Since the text segment is
laid out before the data segment, the synthetic symbols will have
lower addresses than function descriptor symbols and be seen first in
nm -n output.
On other targets, nm --synthetic typically emits symbols on plt
entries. Since the testcase doesn't call any of the functions of
interest there shouldn't be plt entries for those functions, so there
should be no potentially confusing extra symbols.
* testsuite/Makefile.am (keep_text_section_prefix_nm.stdout):
Pass --synthetic to nm.
* testsuite/Makefile.in: Regenerate.
PR 21128
* testsuite/icf_safe_so_test.sh (check_fold): Rewrite to check
multiple symbols at once.
(arch_specific_safe_fold): Likewise, and call with the four foo*
symbols expected to fold.
When gold fails to get an archive member, its error message doesn't
have information for
1. The failed archive member name.
2. The cause of failure: non-ELF object vs non-IR object.
This patch adds the failed archive member name and non-ELF/non-IR info
to gold error message.
* archive.cc (Archive::get_elf_object_for_member): Also print
archive member and non-ELF/non-IR info on error.
gold/
PR gold/23594
* configure.ac: Add checks for link, mkdtemp.
* configure: Regenerate.
* config.in: Regenerate.
* plugin.cc (Plugin_recorder::init): Fall back to mktemp
if mkdtemp is not available.
(link_or_copy_file): Fall back to copy if link() is not available.
The ELF compression header has a field (ch_addralign) that is set to
the alignment of the uncompressed section. This way the section itself
can have a different alignment than the decompressed section. Update
decompress_input_section to get alignment of the decompressed section
and use it when merging decompressed strings.
PR binutils/23919
* merge.cc (Output_merge_string<Char_type>::do_add_input_section):
Get addralign from decompressed_section_contents.
* object.cc (build_compressed_section_map): Set info.addralign.
(Object::decompressed_section_contents): Add a palign
argument and store p->second.addralign in *palign if it isn't
NULL.
* object.h (Compressed_section_info): Add addralign.
(section_is_compressed): Add a palign argument, default it
to NULL, store p->second.addralign in *palign if it isn't NULL.
(Object::decompressed_section_contents): Likewise.
* output.cc (Output_section::add_input_section): Get addralign
from section_is_compressed.
This test fails on powerpc64le due to the justsyms_lib being built
with exported_data at 0x2010000, apparently due to the powerpc target
code generating an empty relro .branch_lt section. Since the test
relies on the library having exported_data at 0x2000000, avoid the
problem by linking with -z norelro. Also, the test doesn't need to
avoid checking the function symbol on powerpc elfv2.
* testsuite/Makefile.am (justsyms_lib): Link with -z norelro.
* testsuite/Makefile.in: Regenerate.
* testsuite/justsyms_exec.c (main): Do check exported_func
on PowerPC64 ELFv2.
PowerPC64 ELFv2 uses the top 3 bits of st_other to encode a function's
local entry point offset from its global entry point. Allow st_other
bits except for visibility==default.
* testsuite/ver_test_14.sh: Accept objdump -T display of st_other
bits on powerpc64le.
The patch allows the gold testsuite to pass when using something like
the following configure line, which works for the rest of the binutils
testsuite. At least, it does if you don't configure your gcc with any
of the options that force a particular path to as or ld.
gccdir="/home/alan/build/gcc/prev-"
gccsrc="/home/alan/src/gcc.git"
gcctarg="x86_64-linux"
CC="${gccdir}gcc/xgcc -B${gccdir}gcc/" \
CXX="${gccdir}gcc/xg++ -B${gccdir}gcc/ -I${gccdir}$gcctarg/libstdc++-v3/include -I${gccdir}$gcctarg/libstdc++-v3/include/$gcctarg -I${gccsrc}/libstdc++-v3/libsupc++ -L${gccdir}$gcctarg/libstdc++-v3/src/.libs/" \
~/src/binutils-gdb/configure ...
gold's -Bgcctestdir/ option must come before the -B supplied by $CC
or $CXX, in order to pick up the linker we want to test. Also when
using a not-yet-installed gcc, it is necessary to provide a collect-ld
in gcctestdir/ as otherwise a collect-ld script in -B${gccdir}gcc/
will be used and the wrong linker tested.
Besides this, the patch fixes some bugs: The $COMPILE -D_FORTIFY_SOURCE
edit was wrong (but worked for usual values), and the $CXXLINK_S edit
unnecessarily but harmlessly used extra backslash quoting. See
posix shell documentation regarding quoting, or
www.gnu.org/software/bash/manual/bashref.html#Command-Substitution
Also, -Bgcctestdir/ in one place makes it less likely a new test will
be added that accidentally lacks the option.
* Makefile.am (gcctestdir1/ld): Use $@ and absolute paths.
(gcctestdir1/collect-ld): New.
(ld1_DEPENDENCIES): Add gcctestdir1/collect-ld.
(ld1_LDFLAGS): Remove -Bgcctestdir1/.
(editcc1, ld1_LINK): Define.
(gcctestdir2/ld, gcctestdir2/collect-ld, ld2_DEPENDENCIES),
(ld2_LDFLAGS, editcc2, ld2_LINK),
(ld1_r_DEPENDENCIES, ld1_r_LDFLAGS, ld1_r_LINK),
(gcctestdir2-r/ld, gcctestdir2-r/collect-ld, ld2_r_DEPENDENCIES),
(ld2_r_LDFLAGS, editcc2r, ld2_r_LINK),
(gcctestdir3/ld, gcctestdir3/collect-ld, ld3_DEPENDENCIES),
(ld3_LDFLAGS, editcc3, ld3_LINK),
(gcctestdir4/ld, gcctestdir4/collect-ld, ld4_DEPENDENCIES),
(ld4_LDFLAGS, editcc4, ld4_LINK): Similarly.
* Makefile.in: Regenerate.
* testsuite/Makefile.am (editcc): Define sed command to put
our -B option first. Remove other occurrences of -Bgcctestdir/
throughout file.
(editcc1): Define for -D_FORTIFY_SOURCE stripping.
(editcc2): Define for -static-libgcc/libstdc++ stripping.
(LINK1, CXXLINK1): Don't use CCLD or CXXLD.
(CCLD, CXXLD, COMPILE, LINK, CXXCOMPILE, CXXLINK, CXXLINK_S): Define
using editcc macros.
(gcctestdir/collect-ld): New rule, add as a dependency of..
(gcctestdir/ld): ..this. Use $@ and abs_top_buildir.
(gcctestdir/as): Use $@.
* testsuite/Makefile.in: Regenerate.
* testsuite/incremental_test.sh (actual): Match collect-ld too.
Cleans a few more test files.
* Makefile.am (MOSTLYCLEANFILES): Define.
* Makefile.in: Regnerate.
* testsuite/Makefile.am (MOSTLYCLEANFILES): Add ver_test_14 and
gnu_property_test.
* testsuite/Makefile.in: Regnerate.
gold/
* target.h (Sized_target::record_gnu_property): Change first two
parameters to unsigned int.
* x86_64.cc (Target_x86_64::record_gnu_property): Likewise.
gold * layout.cc (section_name_mapping): Add an entry for
.gnu.build.attributes.
ld * scripttempl/elf.sc: Place .gnu.build.attributes sections with
other read-only sections.
When an .eh_frame section has deferred layout because of plugins, gold
was neglecting to mark the section as deferred. When we later processed
the corresponding relocation section, we were then ignoring it, causing
the internal error later on in the link.
gold/
PR gold/23397
* object.cc (Sized_relobj_file::do_layout): Mark section as deferred.
* testsuite/Makefile.am (plugin_test_1): Add --emit-relocs option to
existing test case.
* testsuite/Makefile.in: Regenerate.
When generating _end, _edata, etc. symbols, and a version script provides
a version name, and we are linking against another shared library that
provides those symbols with a different version, gold ends up trying to
resolve the other shared library's symbols to the new definitions, resulting
in two copies of each symbol, one as default, and one as non-default.
This patch tests for that condition, and ignores the symbols provided
by the other shared library.
gold/
PR gold/23409
* symtab.cc (Symbol_table::define_special_symbol): Add check for
version name on existing symbol.
* testsuite/Makefile.am (ver_test_pr23409): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_pr23409.sh: New test script.
* testsuite/ver_test_pr23409_1.script: New version script.
* testsuite/ver_test_pr23409_2.script: New version script.
I just stumbled over this with 2.29.1 while building a cross-toolchain, on Cygwin64, but it's still the same for 2.30. m.arena has size_t on Cygwin64 and thus errors out due to -Werror=format.
gold * main.cc: Print m.arena as long long.
Testing for the GCC version 5 or later isn't right, since C++ 11 support
wasn't enabled by default until later. This patch tests the C++ standard
support directly instead of inferring it from the GCC version.
gold/
* incremental.cc (Sized_incremental_binary::setup_readers): Use
emplace_back for C++ 11 or later.
gold/
PR gold/22915
* x86_64.cc (Output_data_plt_x86_64_ibt): New class.
(Target_x86_64::do_make_data_plt): (All instantiations) Check for
IBT feature bit and create IBT PLTs.
The original patch did not give the target enough hooks to discover that
an input object file does not have a particular property. For the
GNU_PROPERTY_X86_FEATURE_1_AND property, for example, where a missing
property should be assumed to be all zeroes, and ANDed with other
object modules, this is essential. We now store the target-specific
properties locally in the Target structure as native uint32_t fields,
then AND the per-object feature bits with the program's feature bits
when we're finished processing each input object file. The target-specific
properties are then added back to the output note section during
finalization.
gold/
PR gold/22914
* layout.cc (read_sized_value): Fix spelling of section name.
(Layout::layout_gnu_property): Call Sized_target::record_gnu_property
for target-specific properties;
don't store them with target-independent properties yet.
(Layout::merge_gnu_properties): New method.
(Layout::add_gnu_property): New method.
(Layout::create_gnu_properties_note): Call target to finalize
target-specific properties. Fix spelling of output section name.
* layout.h (Layout::merge_gnu_properties): New method.
(Layout::add_gnu_property): New method.
* object.cc (Sized_relobj_file::do_layout): Call
Layout::merge_gnu_properties.
* target.h (Target::merge_gnu_property): Remove.
(Target::finalize_gnu_properties): New method.
(Target::do_merge_gnu_property): Move to Sized_target and rename.
(Target::do_finalize_gnu_properties): New virtual method.
(Sized_target::record_gnu_property): Moved and renamed from
Target::do_merge_gnu_property.
(Sized_target::merge_gnu_properties): New virtual method.
* x86_64.cc (Target_x86_64::isa_1_used_, isa_1_needed_)
(feature_1_, object_feature_1_, seen_first_object_): New data members.
(Target_x86_64::do_merge_gnu_property): Rename to ...
(Target_x86_64::record_gnu_property): ... this. Save target-specific
properties in Target class object.
(Target_x86_64::merge_gnu_properties): New method.
(add_property): New static inline function.
(Target_x86_64::do_finalize_gnu_properties): New method.
* testsuite/Makefile.am (gnu_property_test): Remove C source file;
link directly without compiler driver.
* testsuite/Makefile.in: Regenerate.
* testsuite/gnu_property_a.S: Add _start.
Replacing push_back() with emplace_back() eliminates the calls to the
copy constructor, but I still had to provide explicit copy constructors
because of the call to vector::reserve(), which tries to instantiate them
even though they'll never actually be called when reserve() is called
on an empty vector.
gold/
* incremental.cc (Sized_incremental_binary::setup_readers): Use
emplace_back for GCC 5 and later.
* incremental.h (Incremental_binary::Input_reader): Provide copy
constructor.
(Sized_incremental_binary::Sized_input_reader): Likewise.
elfcpp/
PR gold/22914
* elfcpp.h (NT_GNU_PROPERTY_TYPE_0): New note type.
(GNU_PROPERTY_*): New Gnu property types.
* x86_64.h (GNU_PROPERTY_X86_FEATURE_1_IBT)
(GNU_PROPERTY_X86_FEATURE_1_SHSTK): New x86 feature bits.
gold/
PR gold/22914
* layout.cc (Layout::Layout): Initialize gnu_properties_.
(read_sized_value, write_sized_value): New functions.
(Layout::layout_gnu_property): New method.
(Layout::create_notes): Call create_gnu_properties_note.
(Layout::create_gnu_properties_note): New method.
* layout.h (Layout::layout_gnu_property): New method.
(Layout::create_gnu_properties_note): New method.
(Layout::Gnu_property, Layout::Gnu_properties): New types.
(Layout::gnu_properties_): New data member.
* object.cc (Sized_relobj_file::layout_gnu_property_section): New
method.
(Sized_relobj_file::do_layout): Handle .note.gnu.property sections.
* object.h (Sized_relobj_file::layout_gnu_property_section): New
method.
* target.h (Target::merge_gnu_property): New method.
(Target::do_merge_gnu_property): New virtual method.
* x86_64.cc (Target_x86_64::do_merge_gnu_property): New method.
* testsuite/Makefile.am (gnu_property_test): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/gnu_property_a.S: New source file.
* testsuite/gnu_property_b.S: New source file.
* testsuite/gnu_property_c.S: New source file.
* testsuite/gnu_property_main.c: New source file.
* testsuite/gnu_property_test.sh: New test script.
When we have a weak reference to a symbol defined in an
as-needed library, and that library ends up not-needed, gold
simply clears the version information in the symbol table, even
if the symbol could have been resolved by a needed library later
in the link order. This results in a loss of version information,
which can cause the program to bind to the wrong version at run
time.
This patch lets a dynamic definition override an earlier one if
the earlier one is from a not-needed library, so that we can
retain the version information from the binding to the needed
library. In order to do that, the tracking of needed/not-needed
had to be moved up to symbol resolution time, instead of during
Symbol_table::set_dynsym_indexes().
In cases where we still end up discarding version information,
I've added a warning.
For the original problem report and discussion, see:
https://stackoverflow.com/questions/50751421/undefined-behavior-in-shared-lib-using-libpthread-but-not-having-it-in-elf-as-d
gold/
* resolve.cc (Symbol_table::resolve): Rename tobinding to
orig_tobinding. Call set_is_needed() for objects that resolve
non-weak references.
(Symbol_table::should_override): Allow a dynamic definition to
override an earlier one in a not-needed library.
* symtab.cc (Symbol_table::set_dynsym_indexes): Remove separate
processing for as-needed symbols. Add warning when discarding
version informatin.
* testsuite/Makefile.am (weak_as_needed): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/weak_as_needed.sh: New test script.
* testsuite/weak_as_needed_a.c: New source file.
* testsuite/weak_as_needed_b.c: New source file.
* testsuite/weak_as_needed_b.script: New version script.
* testsuite/weak_as_needed_c.c: New source file.
* testsuite/weak_as_needed_c.script: New version script.
gold/
PR gold/23268
* dynobj.cc (Versions::Versions): Change init for needs_base_version_.
(Versions::record_version): Add verdefs for both shared objects and
executables.
(Versions::add_def): Likewise for base version.
(Versions::add_need): Don't add base version for executables.
(Versions::version_index): Look up version for both shared objects and
executables.
* testsuite/Makefile.am (ver_test_14): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_14.script: New version script.
* testsuite/ver_test_14.sh: New test script.
The autotools library macro (AX_PTHREAD) is now used to detect if
pthreads is present and multi-threaded linking in gold is automatically
enabled if it is found. This enables multi-threaded gold on platforms
where pthreads is enabled via other methods than just -lpthread
(e.g., MinGW).
2018-06-19 Joshua Watt <jpewhacker@gmail.com>
Cary Coutant <ccoutant@gmail.com>
gold/
* configure.ac: Replace manual thread configuration with AX_PTHREAD.
Add --enable-threads=auto.
* Makefile.am (THREADFLAGS, THREADLIBS): New defines.
(AM_CFLAGS, AM_CXXFLAGS): Add $(THREADFLAGS.
(THREADSLIB): Remove; change all references to THREADLIBS.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.am (THREADSLIB): Replace with...
(THREADFLAGS, THREADLIBS): ... these.
(LDADD): Remove; add as individual defines for...
(object_unittest, binary_unittest, leb128_unittest)
(overflow_unittest): ... these tests.
(tls_test, tls_pic_test, tls_pie_test, tls_pie_pic_test)
(tls_shared_test, tls_shared_ie_test, tls_shared_gd_to_ie_test)
(tls_shared_gnu2_gd_to_ie_test, tls_shared_gnu2_test_LDFLAGS)
(tls_shared_nonpic_test_LDFLAGS): Add $(THREADFLAGS) and ($THREADLIBS).
* testsuite/Makefile.in: Regenerate.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
Gold resolves GOT-relative relocs relative to the GOT base +
0x8000 when the GOT is larger than 0x8000. However, previously
the _GLOBAL_OFFSET_TABLE_ symbol was set to GOT base + 0x8000
when the .got.plt was larger than 0x8000. This patch makes both
checks use the size of the .got section so that they agree when
to add 0x8000.
During --icf processing, gold was incorrectly processing the relocation
addend for references to items in a merge section. PC-relative references
and other forms of reference with a biased base address require a
non-section local symbol, where the addend is purely the bias.
gold/
PR gold/20642
PR gold/22820
* gc.h (gc_process_relocs): Flag STT_SECTION symbols in symvec.
* icf.cc (get_section_contents): For merge sections, ignore the
addend for relocations against non-section symbols.
gold/
PR gold/16504
* dynobj.cc (Versions::symbol_section_contents): Don't set
VERSYM_HIDDEN flag for undefined symbols.
* symtab.cc (Symbol_table::add_from_object): Don't override default
version definition with a different default version.
* symtab.h (Symbol::from_dyn): New method.
* testsuite/plugin_test.c (struct sym_info): Add ver field.
(claim_file_hook): Pass symbol version to plugin API.
(parse_readelf_line): Parse symbol version.
* testsuite/Makefile.am (ver_test_pr16504): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_pr16504.sh: New test script.
* testsuite/ver_test_pr16504_a.c: New source file.
* testsuite/ver_test_pr16504_a.script: New version script.
* testsuite/ver_test_pr16504_b.c: New source file.
* testsuite/ver_test_pr16504_b.script: New version script.
When checking a R_ARM_TARGET[12] relocation, we need a valid target
pointer, but the garbage collection code was passing a NULL instead.
The previous fix for this bug fixed the call to
scan.global_reloc_may_be_function_pointer, but missed the similar
call to scan.local_reloc_may_be_function_pointer.
gold/
PR gold/23046
* gc.h (gc_process_relocs): Pass target to
scan.local_reloc_may_be_function_pointer.
When checking a R_ARM_TARGET[12] relocation, we need a valid target
pointer, but the garbage collection code was passing a NULL instead.
gold/
PR gold/23046
* gc.h (gc_process_relocs): Pass target to
scan.global_reloc_may_be_function_pointer.
The gold change is to pick up HJ's PR22318 AC_PLUGINS update. The
ld change is to correct a file I generated from a modified tree.
gold/
* configure: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
In addition to the existing relocs we need two more to mark all
instructions in the call sequence, PLTCALL on the call itself (plus
the toc restore insn for ppc64), and PLTSEQ on others. All
relocations in a particular sequence have the same symbol.
Example ppc64 ELFv2 assembly:
.reloc .,R_PPC64_PLTSEQ,puts
std 2,24(1)
addis 12,2,puts@plt@ha # .reloc .,R_PPC64_PLT16_HA,puts
ld 12,puts@plt@l(12) # .reloc .,R_PPC64_PLT16_LO_DS,puts
.reloc .,R_PPC64_PLTSEQ,puts
mtctr 12
.reloc .,R_PPC64_PLTCALL,puts
bctrl
ld 2,24(1)
Example ppc32 -fPIC assembly:
addis 12,30,puts+32768@plt@ha # .reloc .,R_PPC_PLT16_HA,puts+0x8000
lwz 12,12,puts+32768@plt@l # .reloc .,R_PPC_PLT16_LO,puts+0x8000
.reloc .,R_PPC_PLTSEQ,puts+32768
mtctr 12
.reloc .,R_PPC_PLTCALL,puts+32768
bctrl
Marking sequences like this allows the linker to convert them to nops
and a direct call if the target symbol turns out to be local.
When the call is __tls_get_addr, each relocation shown above is paired
with an R_PPC*_TLSLD or R_PPC*_TLSGD reloc to additionally mark the
sequence for possible TLS optimization. The TLSLD or TLSGD relocs are
emitted first.
include/
* elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define.
* elf/ppc64.h (R_PPC64_PLTSEQ, R_PPC64_PLTCALL): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add PLTSEQ and PLTCALL howtos.
(is_plt_seq_reloc): New function.
(ppc_elf_check_relocs): Handle PLTSEQ and PLTCALL relocs.
(ppc_elf_tls_optimize): Handle inline plt call sequence.
(ppc_elf_relax_section): Handle PLTCALL reloc.
(ppc_elf_relocate_section): Nop out inline plt call sequence when
resolving locally.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_PLTSEQ and
R_PPC64_PLTCALL entries. Comment R_PPC64_TOCSAVE.
(has_tls_get_addr_call): Correct comment.
(is_branch_reloc): Add PLTCALL.
(is_plt_seq_reloc): New function.
(ppc64_elf_check_relocs): Handle PLT16_LO_DS reloc. Set
has_tls_reloc for R_PPC64_TLSGD and R_PPC64_TLSLD. Create plt
entry for R_PPC64_PLTCALL.
(ppc64_elf_tls_optimize): Handle inline plt call sequence.
(ppc_type_of_stub): Handle PLTCALL reloc.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_relocate_section): Set "can_plt_call" for PLTCALL
reloc insn. Nop out inline plt call sequence when resolving
locally. Handle __tls_get_addr inline plt call optimization.
elfcpp/
* powerpc.h (R_POWERPC_PLTSEQ, R_POWERPC_PLTCALL): Define.
gold/
* powerpc.cc (Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call):
Handle inline plt sequence relocs.
(Stub_table::Plt_stub_key::Plt_stub_key): Likewise.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
Necessary if gcc is to use PLT16 relocs to implement -mlongcall, and
there isn't a good technical reason why local symbols should be
excluded from PLT16 support. Non-ifunc local symbol PLT entries go in
a separate section to other PLT entries. In a fixed position
executable they won't need to be relocated, and in a PIE or shared
library I chose to not implement lazy relocation.
bfd/
* elf64-ppc.c (LOCAL_PLT_ENTRY_SIZE): Define.
(struct ppc_stub_hash_entry): Add symtype field.
(PLT_KEEP): Define.
(struct ppc_link_hash_table): Add pltlocal and relpltlocal.
(create_linkage_sections): Create pltlocal and relpltlocal.
(ppc64_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP.
(ppc64_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc64_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
Keep PLT entries for inline calls against locals.
(ppc_build_one_stub): Use pltlocal as appropriate.
(ppc_size_one_stub): Likewise.
(ppc64_elf_size_stubs): Set symtype.
(build_global_entry_stubs_and_plt): Init pltlocal and write
relpltlocal for globals.
(write_plt_relocs_for_local_syms): Likewise for local syms.
(ppc64_elf_relocate_section): Support PLT for local syms.
* elf32-ppc.c (PLT_KEEP): Define.
(struct ppc_elf_link_hash_table): Add pltlocal and relpltlocal.
(ppc_elf_create_glink): Create pltlocal and relpltlocal.
(ppc_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP. Adjust update_local_sym_info call.
(ppc_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
(ppc_elf_relocate_section): Support PLT16 relocs for local syms.
(write_global_sym_plt): Init pltlocal and write relpltlocal.
(ppc_finish_symbols): Likewise for locals.
ld/
* emulparams/elf32ppc.sh (OTHER_RELRO_SECTIONS_2): Add .branch_lt.
(OTHER_GOT_RELOC_SECTIONS): Add .rela.branch_lt.
* testsuite/ld-powerpc/elfv2so.d: Update for symbol/stub reordering.
* testsuite/ld-powerpc/relbrlt.d: Likewise.
* testsuite/ld-powerpc/relbrlt.s: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlstocso.r: Likewise.
gold/
* powerpc.cc (Target_powerpc::lplt_): New variable.
(Target_powerpc::lplt_section): Associated accessor.
(Target_powerpc::plt_off): Handle local non-ifunc symbols.
(Target_powerpc::make_lplt_section): New function.
(Target_powerpc::make_local_plt_entry): New function.
(Powerpc_relobj::do_relocate_sections): Write out lplt.
(Output_data_plt_powerpc::first_plt_entry_offset): Zero for lplt.
(Output_data_plt_powerpc::add_local_entry): New function.
(Output_data_plt_powerpc::do_write): Ignore lplt.
(Target_powerpc::make_iplt_section): Make lplt first.
(Target_powerpc::make_brlt_section): Make .branch_lt relro.
(Target_powerpc::Scan::local): Handle PLT16 relocs.
The PowerPC64 ELFv2 ABI and the PowerPC SysV ABI support a number of
relocations that can be used to create and access a PLT entry.
However, the relocs are not well defined. The PLT16 family of relocs
talk about "the section offset or address of the procedure linkage
table entry". It's plain that we do need a relative address when PIC
as otherwise we'd have dynamic text relocations, but "section offset"
doesn't specify which section. The most obvious one, ".plt", isn't
that useful because there is no readily available way of addressing
the start of the ".plt" section. Much more useful would be "the
GOT/TOC-pointer relative offset of the procedure linkage table entry",
and I suppose you could argue that is a "section offset" of sorts.
For PowerPC64 it is better to use the same TOC-pointer relative
addressing even when non-PIC, since ".plt" may be located outside the
range of a 32-bit address. However, for ppc32 we do want an absolute
address when non-PIC as a GOT pointer may not be set up. Also, for
ppc32 PIC we have a similar situation to R_PPC_PLTREL24 in that the
GOT pointer is set to a location in the .got2 section and we need to
specify the .got2 offset in the PLT16 reloc addend.
This patch supports PLT16 relocations using these semantics. This is
not an ABI change for ppc32 since the relocations were not previously
supported by GNU ld, but is for ppc64 where some of the PLT16 relocs
were supported. I'm not particularly concerned since the old ppc64
PLT16 reloc semantics made them almost completely useless.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Handle PLT16 relocs.
(ppc_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Handle PLT16_LO_DS.
(ppc64_elf_relocate_section): Likewise. Correct PLT16
resolution to plt entry relative to toc pointer.
gold/
* powerpc.cc (Target_powerpc::plt_off): New functions.
(is_plt16_reloc): New function.
(Stub_table::plt_off): Use Target_powerpc::plt_off.
(Stub_table::plt_call_size): Use plt_off.
(Stub_table::do_write): Likewise.
(Target_powerpc::Scan::get_reference_flags): Return RELATIVE_REF
for PLT16 relocations.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Return true
for PLT16 relocations.
(Target_powerpc::Scan::global): Make a PLT entry for PLT16 relocations.
(Target_powerpc::Relocate::relocate): Support PLT16 relocations.
(Powerpc_scan_relocatable_reloc::global_strategy): Return RELOC_SPECIAL
for ppc32 plt16 relocs.
Relocations referring to discarded sections are now treated as errors
instead of warnings.
Also with this patch, we will now print the section group signature and the
object file with the prevailing definition of that group along with the
name of the symbol that the relocation is referring to. This additional
information should be much more useful to anyone trying to track down
the source of such errors.
To do so, we now map each discarded section to the Kept_section info in
the Layout class, and defer the logic that maps a discarded section to
its counterpart in the kept group. This gives us the information we need
to identify the signature symbol given the discarded section, and the
name of the object file that provided the prevailing (i.e., first)
definition of that group.
gold/
* object.cc (Sized_relobj_file::include_section_group): Store
reference to Kept_section info for discarded comdat sections
regardless of size. Move size checking to map_to_kept_section.
(Sized_relobj_file::include_linkonce_section): Likewise.
(Sized_relobj_file::map_to_kept_section): Add section name parameter.
Insert size checking logic from above functions.
(Sized_relobj_file::find_kept_section_object): New method.
(Sized_relobj_file::get_symbol_name): New method.
* object.h (Sized_relobj_file::map_to_kept_section): Add section_name
parameter. Adjust all callers.
(Sized_relobj_file::find_kept_section_object): New method.
(Sized_relobj_file::get_symbol_name): New method.
(Sized_relobj_file::Kept_comdat_section): Replace object and shndx
fields with sh_size, kept_section, symndx, and is_comdat fields.
(Sized_relobj_file::set_kept_comdat_section): Replace kept_object
and kept_shndx parameters with is_comdat, symndx, sh_size, and
kept_section.
(Sized_relobj_file::get_kept_comdat_section): Likewise.
* target-reloc.h (enum Comdat_behavior): Change CB_WARNING to CB_ERROR.
Adjust all references.
(issue_undefined_symbol_error): New function template.
(relocate_section): Pass section name to map_to_kept_section.
Move discarded section code to new function above.
* aarch64.cc (Target_aarch64::scan_reloc_section_for_stubs): Move
declaration for gsym out one level. Call issue_discarded_error.
* arm.cc (Target_arm::scan_reloc_section_for_stubs): Likewise.
* powerpc.cc (Relocate_comdat_behavior): Change CB_WARNING to CB_ERROR.
The record_got_page_entry function records and updates the maximum
number of GOT page entries which may be required by an object. In the
case where an existing GOT page entry was expanded, only the entry
belonging to output GOT would have its page count updated. This leaves
the entry belonging to the object GOT with the num_pages count of 1 it
was originally initialized with. Later on when GOTs are being merged in a
multi-got link, this causes the value of entry->num_pages in
add_got_page_entries to always be 1 and underestimates the number of pages
required for the new entry. This in turn leads to an assertion failure in
get_got_page_offset where we run out of pages.
Fix by obtaining the object's GOT entry unconditionally and not just
the first time it gets created. Now that entry2 is always valid, remove
the useless NULL checks.
gold/
PR gold/22770
* mips.cc (Mips_got_info::record_got_page_entry): Fetch existing
page entries for the object's GOT.
During a -r (or --emit-relocs) link, if two sections had the same name but
different section types, gold would put relocations for both sections into
the same relocation section even though the data sections remained separate.
For .eh_frame sections, when one section is PROGBITS and another is
X86_64_UNWIND, we really should be using the UNWIND section type and
combining the sections anyway. For other sections, we should be
creating one relocation section for each output data section.
gold/
PR gold/23016
* incremental.cc (can_incremental_update): Check for unwind section
type.
* layout.h (Layout::layout): Add sh_type parameter.
* layout.cc (Layout::layout): Likewise.
(Layout::layout_reloc): Create new output reloc section if data
section does not already have one.
(Layout::layout_eh_frame): Check for unwind section type.
(Layout::make_eh_frame_section): Use unwind section type for .eh_frame
and .eh_frame_hdr.
* object.h (Sized_relobj_file::Shdr_write): New typedef.
(Sized_relobj_file::layout_section): Add sh_type parameter.
(Sized_relobj_file::Deferred_layout::Deferred_layout): Add sh_type
parameter.
* object.cc (Sized_relobj_file::check_eh_frame_flags): Check for
unwind section type.
(Sized_relobj_file::layout_section): Add sh_type parameter; pass it
to Layout::layout.
(Sized_relobj_file::do_layout): Make local copy of sh_type.
Force .eh_frame sections to unwind section type.
Pass sh_type to layout_section.
(Sized_relobj_file<size, big_endian>::do_layout_deferred_sections):
Pass sh_type to layout_section.
* output.cc (Output_section::Output_section): Initialize reloc_section_.
* output.h (Output_section::reloc_section): New method.
(Output_section::set_reloc_section): New method.
(Output_section::reloc_section_): New data member.
* target.h (Target::unwind_section_type): New method.
(Target::Target_info::unwind_section_type): New data member.
* aarch64.cc (aarch64_info): Add unwind_section_type.
* arm.cc (arm_info, arm_nacl_info): Likewise.
* i386.cc (i386_info, i386_nacl_info, iamcu_info): Likewise.
* mips.cc (mips_info, mips_nacl_info): Likewise.
* powerpc.cc (powerpc_info): Likewise.
* s390.cc (s390_info): Likewise.
* sparc.cc (sparc_info): Likewise.
* tilegx.cc (tilegx_info): Likewise.
* x86_64.cc (x86_64_info, x86_64_nacl_info): Likewise.
* testsuite/Makefile.am (pr23016_1, pr23016_2): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/testfile.cc: Add unwind_section_type.
* testsuite/pr23016_1.sh: New test script.
* testsuite/pr23016_1a.s: New source file.
* testsuite/pr23016_1b.s: New source file.
* testsuite/pr23016_2.sh: New test script.
* testsuite/pr23016_2a.s: New source file.
* testsuite/pr23016_2b.s: New source file.
In PR 22868, two IR files provide conflicting visibility for a symbol.
When a def with PROTECTED visibility is seen after a def with DEFAULT
visibility, gold does not override the visibility. Later, if the
replacement object define the symbol with DEFAULT visibility, the symbol
remains DEFAULT. This was caused by a recent change to allow multiply-defined
absolute symbols, combined with the fact that the plugin framework was using
SHN_ABS as the section index for placeholder symbols. The solution is to
use a real (but arbitrary) section index.
gold/
PR gold/22868
* plugin.cc (Sized_pluginobj::do_add_symbols): Use a real section
index instead of SHN_ABS for defined symbols.
* testsuite/Makefile.am (plugin_pr22868): New test case.
* testsuite/Makefile.in: Regenerate
* testsuite/plugin_pr22868.sh: New test script.
* testsuite/plugin_pr22868_a.c: New source file.
* testsuite/plugin_pr22868_b.c: New source file.
With --debug=plugin, gold will log all plugin actions to a log file,
and make copies of plugin-supplied replacement files in a temporary
directory created under the current working directory.
gold/
* debug.h (DEBUG_PLUGIN): New constant.
(DEBUG_ALL): Add DEBUG_PLUGIN.
(debug_string_to_enum): Likewise.
* plugin.cc (make_sized_plugin_object): Add filename parameter.
(Plugin_recorder): New class.
(Plugin_manager::~Plugin_manager): Delete recorder_.
(Plugin_manager::load_plugins): Create and initialize recorder_.
(Plugin_manager::claim_file): Record claimed and unclaimed files.
(Plugin_manager::make_plugin_object): Use object name as name for
plugin object, if available.
(Plugin_manager::add_input_file): Record replacement files.
(Sized_pluginobj::do_add_symbols): Record plugin symbols.
(Plugin_finish::run): Call Plugin_recorder::finish().
(make_sized_plugin_object): Add filename parameter and pass to
Sized_pluginobj constructor.
* plugin.h (Plugin::filename): New method.
(Plugin::recorder): New method.
(Plugin::recorder_): New data member.
This option does not merge certain text sections with prefixes
.text.hot, .text.unlikely, .text.startup and .text.exit.
* layout.cc (Layout::default_section_order): Check for text section
prefixes.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
(Layout::output_section_name): Check for text section prefixes.
* layout.h (Output_section_order::ORDER_TEXT_HOT): New enum value.
(Output_section_order::ORDER_TEXT_STARTUP): New enum value.
(Output_section_order::ORDER_TEXT_EXIT): New enum value.
(Output_section_order::ORDER_TEXT_UNLIKELY): New enum value.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
* options.h (keep_text_section_prefix): New -z option.
* testsuite/Makefile.am (keep_text_section_prefix): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/keep_text_section_prefix.cc: New test source.
* testsuite/keep_text_section_prefix.sh: New test script.
2018-02-07 Sriraman Tallam <tmsriram@google.com>
* expression.cc (Symbol_expression::set_expr_sym_in_real_elf):
New method.
(Unary_expression::set_expr_sym_in_real_elf): New method.
(Binary_expression::set_expr_sym_in_real_elf): New method.
(Trinary_expression::set_expr_sym_in_real_elf): New method.
* plugin.cc (get_symbol_resolution_info): Fix symbol resolution if
defined or used in defsyms.
* plugin.h (Plugin_manager::is_defsym_def): New method.
(Plugin_manager::Plugin_manager): Initialize defsym_defines_set_.
(Plugin_manager::defsym_defines_set_): New member.
(Plugin_manager::Defsym_defines_set): New typedef.
* script.cc (Script_options::set_defsym_uses_in_real_elf): New method.
(Script_options::find_defsym_defs): New method.
* script.h (Expression::set_expr_sym_in_real_elf): New method.
(Symbol_assignment::is_defsym): New method.
(Symbol_assignment::value): New method.
(Script_options::find_defsym_defs): New method.
(Script_options::set_defsym_uses_in_real_elf): New method.
* testsuite/Makefile.am (plugin_test_defsym): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test.c: Check for new symbol resolution.
* testsuite/plugin_test_defsym.sh: New script.
* testsuite/plugin_test_defsym.c: New test source.
This reverts most of commit 1be5d8d3bb.
Left in place are addition of --no-plt-align to some ppc32 ld tests
and the ld.texinfo --no-plt-thread-safe fix.
Reads the maximum_operations_per_instruction field, added in DWARF-4 to the
line number program header.
gold/
* PR gold/22776
* dwarf_reader.cc (Sized_dwarf_line_info::read_header_prolog): Add
support for DWARF-4 line number tables.
* dwarf_reader.h (Sized_dwarf_line_info::max_ops_per_insn): New field.
Asking for ppc32 plt call stubs to be aligned at 32 byte boundaries
didn't quite work. For ld.bfd they were spaced 32 bytes apart, but
only started on a 16 byte boundary. ld.gold also didn't get it right.
Finding that bug made me check over the ppc64 plt stub alignment,
where I found that negative values for alignment (meaning align to
minimize boundary crossing) were not accepted. Since no one has
complained about that, I guess I could have removed the feature from
ld.bfd documentation, but I've opted instead to correct the code.
I've also added an optional alignment paramenter for ppc32
--plt-align, for some consistency with gold and ppc64 ld.bfd.
bfd/
* elf32-ppc.c (ppc_elf_create_glink): Correct alignment of .glink.
* elf64-ppc.c (ppc64_elf_size_stubs): Handle negative plt_stub_align.
(ppc64_elf_build_stubs): Likewise.
gold/
* powerpc.cc (param_plt_align): New function supplying default
--plt-align values. Use it..
(Stub_table::plt_call_align): ..here, and..
(Output_data_glink::global_entry_align): ..here.
(Stub_table::stub_align): Correct 32-bit minimum alignment.
ld/
* emultempl/ppc32elf.em: Support optional --plt-align arg.
* emultempl/ppc64elf.em: Support negative --plt-align arg.
This is in preparation for the next patch adding Spectre variant 2
mitigation for PowerPC and PowerPC64. Besides tidying code involved
in stub output (to reduce the number of places where bctr is output),
the patch adds some user visible features:
1) PowerPC64 ELFv2 global entry stubs now are aligned under the
control of --plt-align, with a default alignment of 32 bytes.
2) PowerPC64 __glink_PLTresolve is no longer padded out with nops.
3) PowerPC32 PLT stubs are aligned under the control of --plt-align,
with the default alignment being 16 bytes as before.
4) The PowerPC32 branch/nop table emitted before __glink_PLTresolve
is now smaller in many cases. It was sized incorrectly when the
__tls_get_addr_opt stub was used, and unnecessarily included space
for local ifuncs.
bfd/
* elf32-ppc.c (GLINK_ENTRY_SIZE): Add parameters, handle
__tls_get_addr_opt, and alignment sizing.
(TLS_GET_ADDR_GLINK_SIZE): Delete.
(is_nonpic_glink_stub): Don't use GLINK_ENTRY_SIZE.
(ppc_elf_get_synthetic_symtab): Recognize stubs spaced at 4, 6,
or 8 insns.
(ppc_elf_link_hash_table_create): Init new ppc_elf_params field.
(allocate_dynrelocs): Use new GLINK_ENTRY_SIZE.
(ppc_elf_size_dynamic_sections): Likewise. Size branch table
by PLT reloc count.
(write_glink_stub): Handle __tls_get_addr_opt stub.
Pad out to size given by GLINK_ENTRY_SIZE.
(ppc_elf_relocate_section): Adjust write_glink_stub call.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_finish_dynamic_sections): Write PLTresolve without using
insn array since so many need rewriting.
* elf32-ppc.h (struct ppc_elf_params): Add plt_stub_align.
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Rename from
GLINK_CALL_STUB_SIZE. Add htab param and evaluate to size without
nops. Adjust all uses.
(ppc64_elf_get_synthetic_symtab): Don't use GLINK_CALL_STUB_SIZE
in glink_vma calculation.
(struct ppc_link_hash_table): Add global_entry section pointer.
(create_linkage_sections): Create separate section for global
entry stubs.
(PPC_LO, PPC_HI, PPC_HA): Move earlier.
(size_global_entry_stubs): Handle sizing for aligned stubs.
(ppc64_elf_size_dynamic_sections): Handle global_entry alloc,
and don't stash end of glink branch table in rawsize.
(ppc_build_one_stub): Rewrite stub size calculations.
(build_global_entry_stubs): Use new section.
(ppc64_elf_build_stubs): Don't pad __glink_PLTresolve with nops.
Build lazy link stubs out to end of section. Build global entry
stubs in new section.
gold/
* options.h (plt_align): Support for PowerPC32 too.
* powerpc.cc (Stub_table::stub_align): Heed --plt-align for 32-bit.
(Stub_table::plt_call_size, branch_stub_size): Tidy.
(Stub_table::plt_call_align): Implement using stub_align.
(Output_data_glink::global_entry_align): New function.
(Output_data_glink::global_entry_off): New function.
(Output_data_glink::global_entry_address): Use global_entry_off.
(Output_data_glink::pltresolve_size): New function, replacing
pltresolve_size_ constant. Update all uses.
(Output_data_glink::add_global_entry): Align offset.
(Output_data_glink::set_final_data_size): Use global_entry_align.
(Stub_table::do_write): Don't pad __glink_PLTrelsolve with nops.
Tidy stub output. Use global_entry_off.
ld/
* emultempl/ppc32elf.em (params): Init new field.
(enum ppc32_opt): New enum to define OPTION_* values. Add
OPTION_PLT_ALIGN and OPTION_NO_PLT_ALIGN.
(PARSE_AND_LIST_LONGOPTS): Handle new options.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(PARSE_AND_LIST_OPTIONS): Likewise. Break up help output.
* emultempl/ppc64elf.em (ppc_add_stub_section): Init alignment
correctly for negative --plt-stub-align.
* testsuite/ld-powerpc/elfv2exe.d,
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/relbrlt.d,
* testsuite/ld-powerpc/relbrlt.s,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsopt5_32.d,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlstocso.d: Update for changed stub order.
PR 22042 complained that garbage text was being printed in the help
for the -fuse-ld option; this was caused by passing an empty string
to the gettext() function, which sometimes returns garbage when passed
an empty string. The quick fix was to replace "" with NULL as the helparg,
but that changed the parsing of the option, as gold uses the helparg to
determine whether an option takes an argument. This patch adds a
non-empty helparg string to fix both problems.
gold/
PR gold/22694
* options.h (-fuse-ld): Add correct helparg.
We never need to resolve_forwards() a symbol found by hash table lookup
such as target->tls_get_addr_opt() but we do potentially need to do so
for random symbols seen on relocs. So these calls were in the wrong
order, resulting in missing stubs and an assertion failure.
PR 22602
* powerpc.cc (Target_powerpc::Branch_info::mark_pltcall): Resolve
forwards before replacing __tls_get_addr.
(Target_powerpc::Branch_info::make_stub): Likewise.
Gold plugins may wish to further process an input file added by a plugin. For
example, the plugin may need to assign a unique segment for sections in a
plugin-generated input file. This patch adds a plugin callback that the linker
will call when reading symbols from a new input file added after the
all_symbols_read event (i.e. an input file added by a plugin).
2017-12-11 Stephen Crane <sjc@immunant.com>
* plugin-api.h: Add new plugin hook to allow processing of input
files added by a plugin.
(ld_plugin_new_input_handler): New function hook type.
(ld_plugin_register_new_input): New interface.
(LDPT_REGISTER_NEW_INPUT_HOOK): New enum val.
(tv_register_new_input): New member.
* plugin.cc (Plugin::load): Include hooks for register_new_input
in transfer vector.
(Plugin::new_input): New function.
(register_new_input): New function.
(Plugin_manager::claim_file): Call Plugin::new_input if in
replacement phase.
* plugin.h (Plugin::set_new_input_handler): New function.
* testsuite/plugin_new_section_layout.c: New plugin to test
new_input plugin API.
* testsuite/plugin_final_layout.sh: Add new input test.
* testsuite/Makefile.am (plugin_layout_new_file): New test case.
* testsuite/Makefile.in: Regenerate.
This is a partial fix for the gold testsuite failures documented in
PR 21090. The use of -fpie triggers some mov-to-lea optimizations that
are not compatible with incremental linking, so those optimizations need
to be disabled. We also diagnose the attempt to use -pie with incremental
linking, and force -no-pie for the incremental tests in case the build has
been configured to have GCC pass -pie all the time.
We still have a problem where compiling with -fpie results in some GOT
entries even when linking with -no-pie. This combination still causes test
failures because we are not updating the GOT entries in an incremental update
link.
gold/
PR gold/21090
* incremental.cc (Sized_relobj_incr::do_relocate): Fix comment.
* options.cc (General_options::finalize): Disallow -pie with
incremental linking.
* x86_64.cc (Target_x86_64::Scan::local): Don't do mov-to-lea
or callq-to-direct optimizations for incremental links.
(Target_x86_64::Scan::global): Likewise.
(Target_x86_64::Relocate::relocate): Likewise.
* testsuite/Makefile.am (incremental_test): Force -no-pie.
(incremental_test_2): Likewise.
(incremental_test_3): Likewise.
(incremental_test_4): Likewise.
(incremental_test_5): Likewise.
(incremental_test_6): Likewise.
(incremental_copy_test): Likewise.
(incremental_common_test_1): Likewise.
(incremental_comdat_test_1): Likewise.
* testsuite/Makefile.in: Regenerate.
With the new compiler, we're running out of patch space for the .eh_frame
section. To workaround that issue, we compile the before and after versions
both with no unwind tables.
gold/
PR gold/22309
* testsuite/Makefile.am (two_file_test_1_v1_ndebug.o): Compile with
no EH information.
(two_file_test_1_ndebug.o): Likewise.
* testsuite/Makefile.in: Regenerate.
* testsuite/two_file_test_1.cc: Touch to force recompilation with new
flags.
* testsuite/two_file_test_1_v1.cc: Likewise.
The problem is that while the command line isn't trivially empty,
it contains no input files. As gold tries to configure the number
of threads to use based on the number of input files, this causes
the assertion failure above. Fix this problem by making the logic
in gold.cc more robust and also adding a better error message
about --start-lib to options.cc.
gold/
PR gold/22406
* gold.cc (queue_initial_tasks) Check for number of real input files.
* options.cc (Command_line::process) Check for unterminated --start-lib
options.
* testsuite/Makefile.am: Add new test script.
* testsuite/Makefile.in: Regenerate.
* testsuite/check_empty_command_lines.sh: New test script.
If a shared library contains an undefined symbol and LTO adds
a new reference to that same undefined symbol, the reference in the new
object added by the plugin would not trigger a rescan of the archive
containing the symbol.
2017-11-17 Stephen Crane <sjc@immunant.com>
gold/
PR gold/22448
* symtab.cc (Symbol_table::add_from_object): Only rescan for
undefined symbols in regular, not dynamic, objects.
The addresses of erratum stubs can be changed by relaxation passes, and
need to be updated.
gold/
PR gold/20765
* aarch64.cc (Aarch64_relobj::update_erratum_address): New method.
(AArch64_relobj::scan_errata): Update addresses in stub table after
relaxation pass.
I checked over the results of applying --fix-cortex-a53-843419 to
a very large program (gitit) with two stub tables and thousands
of erratum fixes. I noticed that all the erratum_stubs were being
created but about 1/3 of them were being skipped over by
fix_errata_and_relocate_erratum_stubs(). By skipped over I mean
no branch relocation or adrp -> adr transformation was applied to
the erratum address, leaving the erratum_stub unreachable, and
with a branch with a 0 immediate.
The root cause of the skipped over erratum_stubs is
Erratum_stub::invalidate_erratum_stub() that is used to set
relobj_ to NULL when an erratum_stub has been processed.
Unfortunately relobj_ is used in operator<() so altering relobj
makes the results from erratum_stubs_.lower_bound() as used in
find_erratum_stubs_for_input_section() unreliable.
2017-11-30 Peter Smith <peter.smith@linaro.org>
Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/20765
* aarch64.cc (Erratum_stub::invalidate_erratum_stub): Use erratum_insn_
instead of relobj_ to invalidate the stub.
(Erratum_stub::is_invalidated_erratum_stub): Likewise.
The fix for PR21868 (an internal error when --fix-cortex-a53-843419
is applied) has a small mistake in it. When the stub_owner section
needs an erratum fix an incorrect address for the stubs for the section
is given to relocate_erratum_stub. If we are lucky we will get a segfault;
if we aren't, an incorrect patch or data corruption is possible.
The error is visible in PR21868, but the side-effects aren't fatal.
gold/
PR gold/22233
* aarch64.cc (AArch64_relobj::fix_errata_and_relocate_erratum_stubs):
Fix calculation of stub address.
bfd/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
binutils/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gas/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gold/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gprof/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
ld/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
opcodes/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
LLVM is experimenting with placing .eh_frame sections in the COMDAT group
with the function's text. This triggers an internal error in gold because
we don't expect to see but one .eh_frame section in an object, and we use
a single data member in class Sized_relobj_file to keep track of that section.
This patch removes that data member, and instead checks the output section
and the input section offset to identify an optimized .eh_frame section.
gold/
* object.h (class Sized_relobj_file): Remove discarded_eh_frame_shndx_.
* object.cc (Sized_relobj_file::Sized_relobj_file): Likewise.
(Sized_relobj_file::layout_eh_frame_section): Likewise.
(Sized_relobj_file::do_count_local_symbols): Check for optimized
.eh_frame section by other means.
(Sized_relobj_file::compute_final_local_value_internal): Likewise.
This patch fixes the build with GCC 4.2:
gold/testsuite/pr22266_a.c:13:2: error: no newline at end of file
* testsuite/pr22266_a.c: Add a newline at end of file.
The fix for PR 19291 broke some other cases where -r is used with scripts,
as reported in PR 22266. The original fix for PR 22266 ended up breaking
many cases for REL targets, where the addends are stored in the section data,
and are not being adjusted properly.
The problem was basically that in a relocatable output file (ET_REL),
symbol values are supposed to be relative to the start address of their
section. Usually in a relocatable file, all sections start at 0, so the
failure to get this right is often irrelevant, but with a linker script,
we occasionally see an output section whose starting address is not 0,
and gold would occasionally write a symbol with its relocated value instead
of its section-relative value.
This patch reverts the recent fix for PR 22266 as well as my original fix
for PR 19291. The original fix moved the symbol value adjustment to
write_local_symbols, but neglected to undo a few places where the adjustment
was also being applied, resulting in an occasional double adjustment. The
more recent fix removed those other adjustments, but then failed to
re-account for the adjustment when rewriting the relocations on REL targets.
With the old attempts reverted, we now apply the symbol value adjustment to
the one case that had been missed (non-section symbols in merge sections).
But now we also need to account for the adjustment when rewriting the addends
for RELA relocations.
gold/
PR gold/19291
PR gold/22266
* object.cc (Sized_relobj_file::compute_final_local_value_internal):
Revert changes from 2017-11-08 patch. Adjust symbol value in
relocatable links for non-section symbols.
(Sized_relobj_file::compute_final_local_value): Revert changes from
2017-11-08 patch.
(Sized_relobj_file::do_finalize_local_symbols): Likewise.
(Sized_relobj_file::write_local_symbols): Revert changes from
2015-11-25 patch.
* object.h (Sized_relobj_file::compute_final_local_value_internal):
Revert changes from 2017-11-08 patch.
* powerpc.cc (Target_powerpc::relocate_relocs): Adjust addend for
relocatable links.
* target-reloc.h (relocate_relocs): Adjust addend for relocatable links.
* testsuite/pr22266_a.c (hello): New function.
* testsuite/pr22266_main.c (main): Add test for merge sections.
* testsuite/pr22266_script.t: Add rule for .rodata.
Since special symbol must be defined in a regular object, definition
from a dynamic object should be ignored. If special symbol has the
hidden or internal visibility, reference from a dynamic object should
also be ignored. Also __start and __stop symbols in a dynamic object
shouldn't be preempted.
PR gold/22291
* layout.cc (Layout::define_section_symbols): Use STV_PROTECTED
for __start and __stop symbols.
* symtab.cc (Symbol_table::define_special_symbol): Add an
argument, visibility. Ignore definition and reference from
a dynamic object, depending on visibility.
(Symbol_table::do_define_in_output_data): Pass visibility to
define_special_symbol.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_as_constant): Likewise.
(Symbol_table::add_undefined_symbol_from_command_line): Pass
STV_DEFAULT to define_special_symbol.
* symtab.h (Symbol_table::define_special_symbol): Add an
argument, visibility.
The fix committed for PR gold/19291 ended up breaking other cases. The
commit added adjustment code to write_local_symbols, but in many cases
compute_final_local_value_internal had already subtracted the output
section's address. To fix this, all other adjustments are now removed, so
only the one in write_local_symbols is left.
gold/
PR gold/22266
* object.cc (Sized_relobj_file::compute_final_local_value_internal):
Drop relocatable parameter and stop adjusting output value based on
it.
(Sized_relobj_file::compute_final_local_value): Stop passing
relocatable to compute_final_local_value_internal.
(Sized_relobj_file::do_finalize_local_symbols): Ditto.
* object.h (Sized_relobj_file::compute_final_local_value_internal):
Drop relocatable parameter.
2017-11-08 Kyle Butt <iteratee@google.com>
* object.cc (do_find_special_sections): Fix a thinko with memmem return
values and check for != NULL rather than == 0.
binutils has lacked proper pluralization of output messages for a long
time, for example, readelf will display information about a section
that "contains 1 entries" or "There are 1 section headers". Fixing
this properly requires us to use ngettext, because other languages
have different rules to English.
This patch defines macros for ngettext and friends to handle builds
with --disable-nls, and tidies the existing nls support. I've
redefined gettext rather than just defining "_" as dgettext in bfd and
opcodes in case someone wants to use gettext there (which might
conceivably happen with generated code).
bfd/
* sysdep.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
* hosts/alphavms.h (textdomain, bindtextdomain): Likewise.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
opcodes/
* opintl.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
binutils/
* sysdep.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gas/
* asintl.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gold/
* system.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
ld/
* ld.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
Some targets prefix global symbols with "_".
bfd/
* archive.c (_bfd_compute_and_write_armap): Match "__gnu_lto_slim"
optionally prefixed with "_".
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
binutils/
* nm.c (filter_symbols): Match "__gnu_lto_slim" optionally prefixed
with "_".
gold/
* symtab.cc (Symbol_table::add_from_relobj): Match "__gnu_lto_slim"
optionally prefixed with "_".
ld/
* testsuite/ld-plugin/lto-3r.d: Match "__gnu_lto_v" optionally
prefixed with "_".
* testsuite/ld-plugin/lto-5r.d: Likewise.
2017-10-04 Sriraman Tallam <tmsriram@google.com>
* options.h (-z,text_unlikely_segment): New option.
* layout.cc (Layout::layout): Create new output section
for .text.unlikely sections with the new option.
(Layout::segment_precedes): Check for the new option
when segment flags match.
* testsuite/text_unlikely_segment.cc: New test source.
* testsuite/text_unlikely_segment.sh: New test script.
* testsuite/Makefile.am (text_unlikely_segment): New test.
* testsuite/Makefile.in: Regenerate.
gold/
* arm.cc (Stub::do_fixed_endian_write):Far call stubs support for arm
in the be8 mode.
* testsuite/Makefile.am: New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/arm_farcall_arm_arm_be8.sh: New script for arm to arm far
call stubs.
* testsuite/arm_farcall_thumb_thumb_be8.sh: New script for thumb to
thumb far call stubs.
Fixes a thinko. Given code that puts variables into the TOC (a bad
idea, but some see the TOC as a small data section) this bug could
result in an attempt to optimize a sequence that should not be
optimized.
* powerpc.cc (Target_powerpc::Scan::local): Correct dst_off
calculation for TOC16 relocs.
(Target_powerpc::Scan::global): Likewise.
GNU-stack notes added in 2004, aarch64 port added in 2012, so no old object
files with missing GNU-stack notes that we need to worry about.
gold/
* aarch64.cc (Target_aarch64::aarch64_info): Set
is_default_stack_executable to false.
gcc doesn't emit stack notes for ELFv1, since ELFv1 never needs an
executable stack. Note that ELFv1 is usually big-endian and ELFv2
little-endian, but the ABI is really orthogonal to endiannes.
* powerpc.cc (Target_powerpc<64,*>::powerpc_info): Set
is_default_stack_executable false.
2017-09-20 Teresa Johnson <tejohnson@google.com>
* plugin.cc (is_visible_from_outside): Check for export dynamic symbol
option and list.
* testsuite/Makefile.am (plugin_test_12): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/export_dynamic_plugin.cc: New test source.
* testsuite/plugin_test_12.sh: New test script.
ppc32, like many targets, defines the address of a function as the PLT
call stub code for functions referenced but not defined in a non-PIC
executable. ppc32 gold, unlike other targets, inherits the ppc64
multiple stub capability for dealing with very large binaries where
one set of stubs can't be reached from all code locations. This means
there can be multiple choices of address for a function, which might
cause function pointer comparison failures. So for ppc32, make
non-branch references always use the first stub group.
(PowerPC64 ELFv1 is always PIC so doesn't need to define the address
of an external function as the PLT stub. PowerPC64 ELFv2 needs a
special set of global entry stubs to serve as the address of external
functions, so it too is not affected by this bug.)
* powerpc.cc (Target_powerpc::Branch_info::make_stub): Put
stubs for ppc32 non-branch relocs in first stub table.
(Target_powerpc::Relocate::relocate): Resolve similarly.
The trouble with stubs per output section is that ppc32 uses a plt
stub as the address of a global function. This needs to be unique,
otherwise we'll get multiple addresses for a function.
Obviously this is only a partial solution, since ppc32 will get
multiple stubs when code is larger than 33M. A proper fix will
involve selecting a unique stub to use for non-branch relocs.
* options.h (stub-group-multi): Default to true. Add
--no-stub-group-multi.
In the TLS GD/LD to LE optimization, ld replaces a sequence like
addi 3,2,x@got@tlsgd R_PPC64_GOT_TLSGD16 x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
with
addis 3,13,x@tprel@ha R_PPC64_TPREL16_HA x
addi 3,3,x@tprel@l R_PPC64_TPREL16_LO x
nop
When the tprel offset is small, this can be further optimized to
nop
addi 3,13,x@tprel
nop
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add do_tls_opt.
(ppc64_elf_tls_optimize): Set it.
(ppc64_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO and TPREL16_LO_DS relocs to use r13 when
addis would add zero.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add do_tls_opt.
(ppc_elf_tls_optimize): Set it.
(ppc_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO relocs to use r2 when addis would add zero.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Nop addis on
TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS
relocs to use r2/r13 when addis would add zero.
ld/
* testsuite/ld-powerpc/tls.s: Add calls with tls markers.
* testsuite/ld-powerpc/tls32.s: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Run tls marker tests.
* testsuite/ld-powerpc/tls.d: Adjust for TPREL16_HA/LO optimization.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
* testsuite/ld-powerpc/tlsmark.d: Likewise.
* testsuite/ld-powerpc/tlsopt4.d: Likewise.
* testsuite/ld-powerpc/tlstoc.d: Likewise.
This implements the special __tls_get_addr_opt call stub for powerpc
gold that returns __thread variable addresses without actually making
a call to __tls_get_addr in most cases. Shared libraries that are
loaded at program load time (ie. dlopen is not used) have a known
layout for their __thread variables, and thus DTPMOD64/DPTREL64 pairs
describing those variables can be set up by ld.so for the
__tls_get_addr_opt call stub fast exit.
Ref https://sourceware.org/ml/libc-alpha/2015-03/msg00626.html
I really, really wish I'd used a differently versioned __tls_get_addr
symbol than the base symbol to indicate glibc support for the
optimized call, rather than having glibc export __tls_get_addr_opt. A
lot of the messing around here, flipping symbols from __tls_get_addr
to __tls_get_addr_opt, is caused by that decision. About the only
benefit is that a user can see at a glance that their disassembled
code is calling __tls_get_addr via the fancy call stub.. Anyway, we
need references to __tls_get_addr to seem like they were to
__tls_get_addr_opt, and in cases like the tsan interceptor, a
definition of __tls_get_addr to seem like one of __tls_get_addr_opt
as well. That's the reason for Symbol::clear_in_reg and
Symbol_table::clone, and why symbols are substituted in Scan::global
and other places dealing with dynamic linking.
elfcpp/
* elfcpp.h (DT_PPC_OPT): Define.
* powerpc.h (PPC_OPT_TLS): Define.
gold/
* options.h (tls_get_addr_optimize): New option.
* symtab.h (Symbol::clear_in_reg, clone): New functions.
(Sized_symbol::clone): New function.
(Symbol_table::clone): New function.
* resolve.cc (Symbol::clone, Sized_symbol::clone): New functions.
* powerpc.cc (Target_powerpc::has_tls_get_addr_opt_,
tls_get_addr_, tls_get_addr_opt_): New vars.
(Target_powerpc::tls_get_addr_opt, tls_get_addr,
is_tls_get_addr_opt, replace_tls_get_addr,
set_has_tls_get_addr_opt, stk_linker): New functions.
(Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call): Add
target param. Update callers. Compare symbols rather than names.
(Target_powerpc::do_define_standard_symbols): Init tls_get_addr_
and tls_get_addr_opt_.
(Target_powerpc::Branch_info::mark_pltcall): Translate tls_get_addr
sym to tls_get_addr_opt.
(Target_powerpc::Branch_info::make_stub): Likewise.
(Stub_table::define_stub_syms): Likewise.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
(add_3_12_2, add_3_12_13, bctrl, beqlr, cmpdi_11_0, cmpwi_11_0,
ld_11_1, ld_11_3, ld_12_3, lwz_11_3, lwz_12_3, mr_0_3, mr_3_0,
mtlr_11, std_11_1): New constants.
(Stub_table::eh_frame_added_): Delete.
(Stub_table::tls_get_addr_opt_bctrl_, plt_fde_len_, plt_fde_): New vars.
(Stub_table::init_plt_fde): New functions.
(Stub_table::add_eh_frame, replace_eh_frame): Move definition out
of line. Init and use plt_fde_.
(Stub_table::plt_call_size): Return size for tls_get_addr stub.
Extract alignment code to..
(Stub_table::plt_call_align): ..this new function. Adjust all callers.
(Stub_table::add_plt_call_entry): Set has_tls_get_addr_opt and
tls_get_addr_opt_bctrl, and align after that.
(Stub_table::do_write): Write out tls_get_addr stub.
(Target_powerpc::do_finalize_sections): Emit DT_PPC_OPT
PPC_OPT_TLS/PPC64_OPT_TLS bit.
(Target_powerpc::Relocate::relocate): Don't check for or modify
nop following bl for tls_get_addr stub.
On 64-bit targets there is a 32-bit hole in symbol->u_, and another
due to symbol flags exceeding 32 bits. By splitting the union,
the total size of the class reduces by one 64-bit word.
* symtab.h (Symbol): Split u_ into u1_ and u2_. Adjust accessors
to suit. Move plt_offset_ before got_offsets_.
* symtab.cc (Symbol::init_fields): Adjust for union change.
(Symbol::init_base_output_data): Likewise.
(Symbol::init_base_output_segment): Likewise.
(Symbol::allocate_base_common): Likewise.
(Symbol::output_section): Likewise.
(Symbol::set_output_section): Likewise.
(Symbol::set_output_segment): Likewise.
* resolve.cc (Symbol::override_base): Likewise.
(Symbol::override_base_with_special): Likewise.
gold/ChangeLog:
PR gold/21868
* aarch64.cc (AArch64_relobj::try_fix_erratum_843419_optimized):
Add extra view offset argument to function.
(AArch64_relobj::fix_errata_and_relocate_erratum_stubs): Add
extra view offset set to the output offset when the view has
is_input_output_view set, since it has not already been
included. Pass this to try_fix_erratum_843419_optimized.
If a custom linker script with an unexpected relative layout of .got
and .got.plt sections was used, gold might produce a wrong offset
when applying R_AARCH64_TLSDESC_* relocations.
This patch fixes the issue by calculating "got_tlsdesc_offset"
in a more direct way.
gold/
* aarch64.cc (Target_aarch64::Relocate::relocate_tls):
Make got_tlsdesc_offset signed and fix its calculation.
* testsuite/Makefile.am (aarch64_tlsdesc): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_tlsdesc.s: New test source file.
* testsuite/aarch64_tlsdesc.sh: New test script.
* testsuite/aarch64_tlsdesc.t: New test linker script.
This patch provides a flag for PowerPC64 ELFv2 use in class Symbol,
and modifies Sized_target::resolve to return whether the symbol has
been resolved. If not, normal processing continues. I use this for
PowerPC64 ELFv2 to keep track of whether a symbol has any definition
with non-zero localentry, in order to disable --plt-localentry for
that symbol.
PR 21847
* powerpc.cc (Target_powerpc::is_elfv2_localentry0): Test
non_zero_localentry.
(Target_powerpc::resolve): New function.
(powerpc_info): Set has_resolve for 64-bit.
* target.h (Sized_target::resolve): Return bool.
* resolve.cc (Symbol_table::resolve): Continue with normal
processing when target resolve returns false.
* symtab.h (Symbol::non_zero_localentry, set_non_zero_localentry):
New accessors.
(Symbol::non_zero_localentry_): New flag bit.
* symtab.cc (Symbol::init_fields): Init non_zero_localentry_.
There is a very small but non-zero probability that a stub group
contains stubs on one relax pass, but does not on the next. In that
case we would get an FDE covering a zero length address range.
(Actually, it's even worse. Alignment padding for stubs can mean the
address for the non-existent stubs is past the end of the original
section to which stubs are attached, and due to the way
do_plt_fde_location calculates the length we can get a negative
length.) Fixing this properly requires removing the FDE.
Also, I have been implementing the __tls_get_addr_opt support for
gold, and that stub needs something other than the default FDE. The
necessary FDE will depend on the offset to the __tls_get_addr_opt
stub, which of course can change during relaxation. That means at the
very least, rewriting the FDE on each pass, possibly changing the FDE
size. I think that is better done by completely recreating PLT
eh_frame FDEs.
* ehframe.cc (Fde::operator==): New.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): New.
* ehframe.h (Fde::operator==): Declare.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): Likewise.
* layout.cc (Layout::remove_eh_frame_for_plt): New.
* layout.h (Layout::remove_eh_frame_for_plt): Declare.
* powerpc.cc (Target_powerpc::do_relax): Remove old eh_frame FDEs.
(Stub_table::add_eh_frame): Delete eh_frame_added_ condition.
Don't add eh_frame for empty stub section.
(Stub_table::remove_eh_frame): New.
This adds a --no-tls-optimize option for people who want to keep
__tls_get_addr calls in an executable rather than optimizing such code
sequences to IE/LE.
Also tidy some formatting errors, rename a variable to better reflect
its use, and tweak two functions that create pairs of GOT entries to
first check whether the GOT entry already exists before potentially
inserting the header via reserve(2). Without the check it is possible
to waste one GOT entry.
* options.h (no_tls_optimize): New powerpc option.
* powerpc.cc (Target_powerpc::abiversion, set_abiversion): Formatting.
(Target_powerpc::stk_toc): Formatting, fix comment.
(Target_powerpc::Track_tls::tls_get_addr_state): Rename from
tls_get_addr.
(Target_powerpc::optimize_tls_gd, optimize_tls_ld, optimize_tls_ie):
Return TLSOPT_NONE when !tls_optimize.
(Target_powerpc::add_global_pair_with_rel): Check
for existing reloc before reserving.
(Target_powerpc::add_local_tls_pair): Likewise.
This makes ld warn about --plt-localentry if a version of glibc
without the necessary ld.so checks is detected, and revises the
documentation.
bfd/
* elf64-ppc.c (ppc64_elf_tls_setup): Warn on --plt-localentry
without ld.so checks.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Warn on --plt-localentry
without ld.so checks.
ld/
* ld.texinfo (plt-localentry): Revise.
The big comment in ppc64_elf_tls_setup says why. I've also added some
code to the bfd linker that catches the -lpthread -lc symbol
differences and disable generation of optimized call stubs even when
--plt-localentry is activated. Gold doesn't yet have that.
PR 21847
bfd/
* elf64-ppc.c (struct ppc_link_hash_entry): Add non_zero_localentry.
(ppc64_elf_merge_symbol): Set non_zero_localentry.
(is_elfv2_localentry0): Test non_zero_localentry.
(ppc64_elf_tls_setup): Default to --no-plt-localentry.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Default to
--no-plt-localentry.
ld/
* ld.texinfo (plt-localentry): Document.
The 64-bit ELF compression header has a reserved field. It should be
cleared to avoid random bits in it.
elfcpp/
PR gold/21857
* elfcpp.h (Chdr_write): Add put_ch_reserved.
(Chdr_write<64, true>::put_ch_reserved): New.
(Chdr_write<64, false>::put_ch_reserved): Likewise.
gold/
PR gold/21857
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Call put_ch_reserved to clear the reserved field for 64-bit ELF.
GCC 4.2 fails to compile "(uint64_t) 0x800080008000" with
error: integer constant is too large for ‘long’ type
This patch adds "llu" suffix to 0x800080008000 for GCC 4.2.
* mips.cc (Mips_relocate_functions): Add "llu" suffix to
0x800080008000.
My PPC64_OPT_LOCALENTRY patch of June 1, git commit f378ab099d, and
the later gold change, git commit 7ee7ff7015, added an insn in
__glink_PLTresolve which needs a corresponding adjustment in the
eh_frame info for asynchronous exceptions to unwind correctly.
It would have been OK for both ABIs to use +5 for the advance before
restore of LR, since we can put the DW_CFA_restore_extended on any
insn after the actual restore and before the r12/r0 copy is clobbered,
but it's slightly better to delay as much as possible. There are
then more addresses where fewer CFA program insns are executed.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Correct advance to
restore of LR.
gold/
* powerpc.cc (glink_eh_frame_fde_64v2): Correct advance to
restore of LR.
(glink_eh_frame_fde_64v1): Advance to restore of LR at latest
possible insn.
The problem is caused by the fact that gold is relocating the stubs
for an entire output section when it processes the relocations for a
particular input section that happened to be designated as the stub
table "owner". The Relocate_task for that input section may or may not
run before the Relocate_task for another input section that contains
the code that needs the erratum fix, but doesn't "own" the stub
table. If it runs before (or might even race with) that other task, it
ends up with a copy of the unrelocated original instruction.
In other words - when calling fix_errata() from
do_relocate_sections(), gold is going through the list of errata stubs
that are associated only with that object. This routine updates the
stored original instruction and replaces it in the output view with a
branch to the stub. Later, as gold is going through the object file's
input sections, it then checks for stub tables "owned" by each input
section, and writes out all the stubs from that stub table, regardless
of what object file each stub is associated with.
Fixed by relocating the erratum stub only after the corresponding
errata spot is fixed. That is to have fix_errata() call
Stub_table::relocate_erratum_stub() for each stub.
gold/ChangeLog
2017-07-06 Han Shen <shenhan@google.com>
PR gold/21491
* aarch64.cc (Erratum_stub::invalidate_erratum_stub): New method.
(Erratum_stub::is_invalidated_erratum_stub): New method.
(Stub_table::relocate_reloc_stub): Renamed from "relocate_stub".
(Stub_table::relocate_reloc_stubs): Renamed from "relocate_stubs".
(Stub_table::relocate_erratum_stub): New method.
(AArch64_relobj::fix_errata_and_relocate_erratum_stubs): Renamed from
"fix_errata".
(Target_aarch64::relocate_reloc_stub): Renamed from "relocate_stub".
elfcpp/
* elfcpp.h (DT_PPC64_OPT): Define.
* powerpc.h (PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC,
PPC64_OPT_LOCALENTRY): Define.
gold/
* options.h (General_options): Add plt_localentry.
* powerpc.cc (Target_powerpc::st_other): New function.
(Target_powerpc::plt_localentry0_, plt_localentry0_init_,
has_localentry0_): New vars.
(Target_powerpc::plt_localentry0, set_has_localentry0,
is_elfv2_localentry0): New functions.
(Target_powerpc::Branch_info::mark_pltcall): Don't set tocsave or
return true for localentry:0 calls.
(Stub_table::Plt_stub_ent::localentry0_): New var.
(Stub_table::add_plt_call_entry): Set localentry0_ and has_localentry0_.
Don't set r2save_ for localentry:0 calls.
(Output_data_glink::do_write): Save r2 in __glink_PLTresolve for elfv2.
(Target_powerpc::scan_relocs): Default plt_localentry0_.
(Target_powerpc::do_finalize_sections): Set DT_PPC64_OPT.
(Target_powerpc::Relocate::relocate): Don't require nop following
calls for localentry:0 plt calls, and don't change nop.
This adds support to gold for the tocsave relocs already supported by
ld.bfd. R_PPC64_TOCSAVE relocs are part of a scheme to move r2 saves
to the prologue of a function rather than in each plt call stub. We
don't want a compiler to always emit the r2 save, as this would be
wasted if the calls turned out to be local. See the tocsave*.s in
ld/testsuite/ld-powerpc/.
* powerpc.cc (Target_powerpc::tocsave_loc_): New var.
(Target_powerpc::mark_pltcall, add_tocsave, tocsave_loc): New functions.
(Target_powerpc::Branch_info::tocsave_): New var.
(Target_powerpc::Branch_info::mark_pltcall): New function.
(Target_powerpc::Branch_info::make_stub): Pass tocsave_ to
add_plt_call_entry.
(Stub_table::Plt_stub_ent): Make public. Add r2save_.
(Stub_table::add_plt_call_entry): Add bool tocsave_ param. Set
r2save_.
(Stub_table::find_plt_call_entry): Return Plt_stub_ent*. Adjust
use throughout.
(Stub_table::do_write): Conditionally output r2 save in plt stubs.
(Target_powerpc::Scan::local): Handle R_PPC64_TOCSAVE.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Skip r2 save in plt call stub
with tocsave reloc. Replace header tocsave nop with r2 save.
* symtab.h (struct Symbol_location_hash): Make public.
I was lazy when adding indx_ to Plt_stub_ent. The field isn't part of
the key, so ought to be part of the mapped type. Make it so.
* powerpc.cc (Plt_stub_key): Rename from Plt_stub_ent. Remove indx_.
(Plt_stub_key_hash): Rename from Plt_stub_ent_hash.
(struct Plt_stub_ent): New.
(Plt_stub_entries): Map from Plt_stub_key to Plt_stub_ent. Adjust
use throughout file.
* aarch64.cc (scan_reloc_for_stub): Use plt_address_for_global to
calculate the symbol value.
(scan_reloc_section_for_stubs): Allow stubs to be created for
section symbols.
(maybe_apply_stub): Handle creating stubs for weak symbols to
match the code in scan_reloc_for_stub.
If two objects are compiled with -fPIC or -fPIE and call the same
function, two different PLT entries are created, one for each object,
but the same stub symbol name is used for both.
* powerpc.cc (Stub_table::define_stub_syms): Always include object's
uniq_ value.
TLS relaxation may change erratum 843419 sequences that those offending ADRP
instructions actually transformed into other instructions in which case there
is erratum 843419 risk anymore that we should avoid installing unnecessary
branch-to-stub.
gold/
* aarch64.cc (Insn_utilities::is_mrs_tpidr_el0): New method.
(AArch64_relobj<size, big_endian>::try_fix_erratum_843419_optimized):
Return ture for some TLS relaxed sequences.
* aarch64.cc (maybe_apply_stub): Add debug logging for looking
up stubs to undefined symbols and early return rather than
fail to look them up.
(scan_reloc_for_stub): Add debug logging for no stub creation
for undefined symbols.
gold/
PR gold/21444
* gold.cc (Target_sparc::Relocate::relocate_tls): Local
variables are final for position-independent executables. This
has to be consistent with Target_sparc::Scan::local otherwise
they will disagree as to whether local-exec is used.
gold/ChangeLog
PR gold/21430
* aarch64.cc
(AArch64_relobj::convert_input_section_to_relaxed_section):
Set the section offset to -1ULL.
(Target_aarch64::relocate_section): Adjust the view in case
of a relaxed input section.
* testsuite/Makefile.am (pr21430): New test.
* testsuite/Makefile.in: Regenerate
* testsuite/pr21430.s: New test source file.
* testsuite/pr21430.sh: New test script.
gold/
* mips.cc (Mips_got_entry::hash()): Shift addend to reduce
possibility of collisions.
(Mips_got_entry::equals): Fix case for GOT_TLS_LDM
entries.
gold/
* mips.cc (Mips_relobj::merge_processor_specific_data_): New data
member.
(Mips_relobj::merge_processor_specific_data): New method.
(Mips_relobj::do_read_symbols): Set merge_processor_specific_data_
to false, only if the input file is a binary or if object has no
contents except the section name string table and an empty symbol
table with the undefined symbol.
(Target_mips::do_finalize_sections): Refactor. Skip empty object files
for merging processor-specific data.
gold/
* mips.cc (Target_mips::Relocate::calculated_value_): New data
member.
(Target_mips::Relocate::calculate_only_): Likewise.
(Target_mips::Relocate::relocate): Handle multiple consecutive
relocations with the same offset.
gold/
* mips.cc (symbol_refs_local): Return false if a symbol
is from a dynamic object.
(Target_mips::got_section): Make _GLOBAL_OFFSET_TABLE_ STV_HIDDEN.
(Target_mips::set_gp): Refactor. Make _gp STT_NOTYPE and
STB_LOCAL.
(Target_mips::do_finalize_sections): Set _gp after all the checks
for creating .got are done.
(Target_mips::Scan::global): Remove unused code.
2017-02-15 Vladimir Radosavljevic <Vladimir.Radosavljevic@imgtec.com>
PR gold/21111
* mips.cc (Mips_relocate_functions::relhigher): New method.
(Mips_relocate_functions::relhighest): Likewise.
(mips_get_size_for_reloc): Add support for relocs: R_MIPS_HIGHER and
R_MIPS_HIGHEST.
(Target_mips::Scan::local): Add support for relocs: R_MIPS_HIGHER,
R_MIPS_HIGHEST, R_MICROMIPS_HIGHER and R_MICROMIPS_HIGHEST.
(Target_mips::Scan::global): Likewise.
(Target_mips::Scan::get_reference_flags): Likewise.
(Target_mips::Relocate::relocate): Call static methods for resolving
HIGHER and HIGHEST relocations.
gold/
* x86_64.cc (Target_x86_64::do_can_check_for_function_pointers):
Return true even when building pie binaries.
(Target_x86_64::possible_function_pointer_reloc): Check opcode
for R_X86_64_PC32 relocations.
(Target_x86_64::local_reloc_may_be_function_pointer): Pass
extra arguments to local_reloc_may_be_function_pointer.
(Target_x86_64::global_reloc_may_be_function_pointer): Likewise.
* gc.h (gc_process_relocs): Add check for STT_FUNC.
* testsuite/Makefile.am (icf_safe_pie_test): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/icf_safe_pie_test.sh: New shell script.
gold/
* mips.cc (Mips_output_data_plt::rel_plt): Remove const from return
type.
(Target_mips::make_plt_entry): Make the sh_info field of .rel.plt
point to .plt.
gold/
PR gold/21054
* mips.cc (Mips_got_info::record_global_got_symbol): Don't add symbol
to the dynamic symbol table if it is forced to local visibility.
(Target_mips::do_finalize_sections): Don't add __RLD_MAP symbol to the
dynamic symbol table if it is forced to local visibility.
Doesn't yet trim off the unused TOC entries.
* powerpc.cc (class Powerpc_copy_relocs): New.
(Powerpc_copy_relocs::emit): New function.
(Powerpc_relobj::relatoc_, toc_, no_toc_opt_): New variables.
(Powerpc_relobj::toc_shndx, set_no_toc_opt, no_toc_opt): New inlines.
(Powerpc_relobj::do_relocate_sections): New function.
(Powerpc_relobj::make_toc_relative): Likewise.
(Powerpc_relobj::do_find_special_sections): Stash away .rela.toc
and .toc too.
(ok_lo_toc_insn): Move earlier, and handle more insns.
(Target_powerpc::Scan::local): If optimizing toc accesses, set
no_toc_opt for entries we can't edit. Check insn validity.
Emit "toc optimization is not supported" warning, downgraded
from error.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Edit TOC indirect code
to TOC relative. Don't emit "toc optimization is not supported"
error here.
PowerPC64 defines .TOC. rather than _GLOBAL_OFFSET_TABLE_, and
what's more, doesn't define it at all unless referenced. For ELFv1
ABI the symbol isn't normally referenced, so modify the test to accept
.TOC. as a variant of _GLOBAL_OFFSET_TABLE_ and 0 or 1 occurrences.
copy_test_relro as written doesn't need copy relocs on PowerPC64.
PowerPC64 is always PIC. So, modify copy_test_relro to test that the
existing vars are in fact read-only directly by deliberately causing a
sigsegv, and add another couple of vars that do cause copy relocs even
when PIC.
* testsuite/ver_test_8.sh: Accept .TOC. in lieu of
_GLOBAL_OFFSET_TABLE_. Allow zero count.
* testsuite/copy_test_relro_1.cc (c, q): New vars.
* testsuite/copy_test_relro.cc: Rewrite to test read-only
status of variables directly. Reference new vars in
read-only data.
Added just to accept, and ignore. gcc since 2015-10-21, when
configured with --enable-secureplt passes this option to the linker.
As powerpc gold cannot link --bss-plt code successfully, gold needs to
accept the option or the gcc specs file needs to be changed.
The patch also make gold detect --bss-plt code and error out rather
than producing a binary that crashes.
* options.h: Add --secure-plt option.
* powerpc.cc (Target_powerpc::Scan::local): Detect and error
on -fPIC -mbss-plt code.
(Target_powerpc::Scan::global): Likewise.
Plus some paranoia in symval_for_branch. We shouldn't get there with
dynamic symbols, but if we ever did the static_cast to Powerpc_relobj
would be wrong.
* powerpc.cc: Use shorter equivalent elfcpp typedef for
Reltype and reloc_size throughout.
(Target_powerpc::symval_for_branch): Exclude dynamic symbols.
(Target_powerpc::Scan::local): Use local var r_sym.
(Target_powerpc::Scan::global: Likewise.
(Target_powerpc::Relocate::relocate): Delete shadowing r_sym.
gold/
PR ld/20995
* copy-relocs.cc (Copy_relocs::make_copy_reloc): Use .dynbss for
read-only data when linking with -z relro.
* copy-relocs.h (Copy_relocs::dynrelro_): New data member.
* testsuite/Makefile.am (copy_test_relro): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/copy_test_relro.cc: New source file.
* testsuite/copy_test_relro_1.cc: New source file.
gold/
PR gold/17643
* options.h (-z bndplt): New option.
* x86_64.cc (Output_data_plt_x86_64::regular_count): New method.
(Output_data_plt_x86_64::address_for_global): Move implementation into
virtual method.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::got): New method.
(Output_data_plt_x86_64::got_plt): New method.
(Output_data_plt_x86_64::got_irelative): New method.
(Output_data_plt_x86_64::do_address_for_global): New virtual method.
(Output_data_plt_x86_64::do_address_for_local): New virtual method.
(class Output_data_plt_x86_64_bnd): New class.
(Target_x86_64::do_make_data_plt): Move out of line and specialize
for each size (both overloads).
(Output_data_plt_x86_64::set_final_data_size): Cosmetic changes.
* testsuite/Makefile.am (bnd_plt_1): New test case.
(bnd_ifunc_1): New test case.
(bnd_ifunc_2): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/bnd_ifunc_1.s: New source file.
* testsuite/bnd_ifunc_1.sh: New shell script.
* testsuite/bnd_ifunc_2.s: New source file.
* testsuite/bnd_ifunc_2.sh: New shell script.
* testsuite/bnd_plt_1.s: New source file.
* testsuite/bnd_plt_1.sh: New shell script.
Gold was not placing forced-local symbols (e.g., hidden visibility)
at the front of the dynamic symbol table, or including them in the
count of local symbols recorded in the .dynsym section's sh_info field.
gold/
* layout.cc (Layout::finalize): Track count of forced-local symbols
in .dynsym.
(Layout::create_symtab_sections): Add local_dynamic_count parameter;
use that instead of sh_info value.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter; pass it to Symtab::set_dynsym_indexes(). Include forced
locals in sh_info value. Pass index of first real global to
Dynobj::create_gnu_hash_table() and Dynobj::create_elf_hash_table().
* layout.h (Layout::create_symtab_sections): Add local_dynamic_count
parameter.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter.
* symtab.cc (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter. Process forced-local symbols first and return the count.
(Symbol_table::finalize): Update comments.
* symtab.h (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter.
(Symbol_table::first_dynamic_global_index_): Update comment.
(Symbol_table::dynamic_count_): Update comment.
* testsuite/Makefile.am (ifuncmod1.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ifuncmod1.sh: New shell script.
When creating a predefined hidden symbol like _GLOBAL_OFFSET_TABLE_, gold
was incorrectly letting a version script add a version to the symbol,
resulting in two copies of the symbol, both STB_LOCAL, but one of which
was grouped in the globals part of the symbol table.
gold/
* symtab.cc (Symbol_table::define_special_symbol): Add is_forced_local
parameter; if set, do not check version script.
(Symbol_table::do_define_in_output_data): Pass is_forced_local for
STB_LOCAL predefined symbols.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_as_constant): Likewise.
* symtab.h (Symbol_table::define_special_symbol): Add is_forced_local
parameter. Adjust all callers.
* testsuite/Makefile.am (ver_test_8.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* ver_test_8.sh: New test script.
Linker-created symbols like __ehdr_start, __etext, __edata, and end
should be relocatable, not absolute.
gold/
* output.cc (Output_segment::first_section): Return NULL if there are
no sections in the segment.
* output.h (Output_segment::first_section_load_address): Assert that
first section is not NULL.
* symtab.cc (Symbol_table::sized_write_globals): Attach linker-created
segment-relative symbols to first section of the segment.
gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
If the .bss section has other data in it besides common allocations,
gold was subtracting the wrong section start address from the symbol
value.
gold/
PR gold/20976
* symtab.cc (Symbol_table::sized_write_globals): Use address of
output section, not input section.
* testsuite/Makefile.am (pr20976): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr20976.c: New source file.
gold/
PR gold/20749
* options.h (--orphan-handling): New option.
(General_options::Orphan_handling): New enum.
(General_options::orphan_handling_enum): New method.
(General_options::set_orphan_handling_enum): New method.
(General_options::orphan_handling_enum_): New data member.
* options.cc (General_options::General_options): Initialize new member.
(General_options::finalize): Convert --orphan-handling argument to enum.
* script-sections.cc (Script_sections::output_section_name): Check it.
There were still some cases I found where orphan section placement
was screwy -- where the script has no output section description for
either .data or .bss, a .bss orphan section ends up getting placed
before the .data section. In addition, if there is an output section
description for a data section not named .data (e.g., .rela.dyn),
the orphan .bss gets placed before it. This patch cleans that up,
by tracking the last allocated section even as we're adding orphans.
I've also improved segment layout in the absence of a PHDRS clause.
A zero-length NOBITS section will no longer force a new segment
when followed by a PROGBITS section.
2016-12-12 Cary Coutant <ccoutant@gmail.com>
gold/
* script-sections.cc (Orphan_section_placement::update_last_alloc):
New method.
(Orphan_section_placement::find_place): Place orphan .data section
after either RODATA or TEXT.
(Script_sections::place_orphan): Call update_last_alloc for allocated
sections.
(Script_sections::create_segments): Improve handling of BSS.
PowerPC64 aligns .got to a 256 byte boundary. This tends to bump the
data segment file size.
PR gold/16711
* testsuite/script_test_15a.sh: Allows larger p_filesz.
* testsuite/script_test_15b.sh: Likewise.
* testsuite/script_test_15c.sh: Likewise.
Since the linker created .TOC. symbol is placed at roughly .got+32k,
.toc input sections must be placed in or after .got if .toc entries
are accessed using 16-bit signed offset relocs. crt1.o contains such
a relocation.
PR gold/20717
* testsuite/pr20717.t: Add .got output section containing .toc.
2016-12-01 Cary Coutant <ccoutant@gmail.com>
Igor Kudrin <ikudrin@accesssoftek.com>
PR gold/20717
* script-sections.cc (Script_sections): Set *keep to false when
no match.
2016-12-11 Igor Kudrin <ikudrin@accesssoftek.com>
PR gold/20717
* testsuite/Makefile.am (pr20717): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr20717.c: New test source file.
* testsuite/pr20717.sh: New test script.
* testsuite/pr20717.t: New test linker script.
PR 16711 noted that gold allocates file space for BSS sections when using
a linker script. I've fixed that by rewriting set_section_addresses and
set_section_list_addresses to track the file offset separate from the
current virtual address, so that BSS sections do not move the file offset.
Now, if a series of BSS sections come at the end of a segment, we do not
allocate file space; but if a script forces them into the middle of a
segment, we will still allocate file space (matching Gnu ld behavior).
I've also added a warning when that happens.
That exposed another problem where orphan .bss sections were sometimes
placed in the middle of a segment. For example, if the script mentions
the .got section, but both .data and .bss are orphans, gold would put
both .data and .bss in front of .got. I've fixed that by ensuring that
orphan BSS sections are always placed after all other allocated sections.
It also exposed a problem where the SUBALIGN property is not handled
properly. The ld manual clearly states that it should override input section
alignment, whether greater or less than the given alignment, but gold would
only increase an input section's alignment. Gold would also place the output
section based on its original alignment before the SUBALIGN property took
effect, leading to a misaligned output section (where the input section
was properly aligned in memory, but was not aligned relative to the start
of the section), in violation of the ELF/gABI spec. I've fixed that by
making sure that the SUBALIGN property overrides the internal alignment of
the input sections as well as the external alignment of the output section.
This affected the behavior of script_test_2, which was written to expect
a misaligned section.
The net effect is, I think, improved compatibility with the BFD linker.
There are still cases where orphan placement differs, but the differences
should be rarer and less important. ALIGN and SUBALIGN behavior is closer,
but still not an exact match -- I still found cases where ld would create
a misaligned output section, and where gold will properly align it.
gold/
PR gold/16711
* output.cc (Output_section::set_final_data_size): Calculate data size
based on relative offset rather than file offset.
(Output_segment::set_section_addresses): Track file offset separately
from address offset.
(Output_segment::set_section_list_addresses): Add pfoff parameter.
Track file offset separately. Don't move file offset for BSS
sections.
* output.h (Output_segment::set_section_list_addresses): Add pfoff
parameter.
* script-sections.cc (Orphan_section_placement): Add PLACE_LAST_ALLOC.
(Orphan_section_placement::Orphan_section_placement): Initialize it.
(Orphan_section_placement::output_section_init): Track last allocated
section.
(Orphan_section_placement::find_place): Place BSS after last allocated
section.
(Output_section_element_input::set_section_addresses): Always override
input section alignment when SUBALIGN is specified.
(Output_section_definition::set_section_addresses): Override alignment
of output section when SUBALIGN is specified.
* testsuite/Makefile.am (script_test_15a, script_test_15b)
(script_test_15c): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_2.cc: Adjust expected layout.
* testsuite/script_test_15.c: New source file.
* testsuite/script_test_15a.sh: New shell script.
* testsuite/script_test_15a.t: New linker script.
* testsuite/script_test_15b.sh: New shell script.
* testsuite/script_test_15b.t: New linker script.
* testsuite/script_test_15c.sh: New shell script.
* testsuite/script_test_15c.t: New linker script.
A branch in a non-exec section that needs a stub can lead to this
assertion.
* powerpc.cc (Powerpc_relobj::stub_table): Return NULL rather
then asserting.
Adds a new option, defaulting to off, that allows a group of stubs to
serve multiple output sections. Prior to this patch powerpc gold
allowed this unconditionally, which is a little unsafe with clever
code that discards/reuses sections at runtime.
* options.h (--stub-group-multi): New PowerPC option.
* powerpc.cc (Stub_control): Add multi_os_ var and param
to constructor. Sort start_ var later. Comment State.
(Stub_control::can_add_to_stub_group): Heed multi_os_.
(Target_powerpc::group_sections): Update.
Gold attaches stubs to an existing section in contrast to ld.bfd which
inserts a new section for stubs. If we want stubs before branches,
then the stubs must be added to the previous section. Adding to the
previous section is a disaster if there is a large gap between the
previous section and the group.
PR gold/20878
* powerpc.cc (Stub_control): Replace stubs_always_before_branch_
with stubs_always_after_branch_, group_end_addr_ with
group_start_addr_.
(Stub_control::can_add_to_stub_group): Rewrite to suit scanning
sections by increasing address.
(Target_powerpc::group_sections): Scan that way. Delete corner
case.
* options.h (--stub-group-size): Update help string.
Some more debug output, and a little hardening.
* powerpc.cc (Stub_table_owner): Provide constructor.
(Powerpc_relobj::set_stub_table): Resize fill with -1.
(Target_powerpc::Branch_info::make_stub): Provide target debug
output on returning false.
If the default starting address is less than the new ABI page size,
we end up misaligning the file header, causing an internal error.
gold/
PR gold/20834
* target.h (Target::default_text_segment_address): Bump default
start address up to ABI page size.
gold/
PR gold/18989
* options.cc (General_options::object_format_to_string): New function.
(General_options::copy_from_posdep_options): New function.
(General_options::parse_push_state): New function.
(General_options::parse_pop_state): New function.
* options.h (--push-state, --pop-state): New options.
(General_options::object_format_to_string): New method.
(General_options::set_incremental_disposition): New method.
(General_options::copy_from_posdep_options): New method.
(General_options::options_stack_): New data member.
gold/
PR gold/20346
* options.cc (One_option::print): Print "(default)" when appropriate.
* options.h: Clean up and re-sort options.
(One_option::is_default): New data member.
(One_option::One_option): Add is_default parameter; adjust all calls.
(DEFINE_var): Add is_default__ parameter; adjust all calls.
(DEFINE_bool): Set is_default based on default_value__.
(DEFINE_bool_ignore): New macro.
(--no-eh-frame-hdr): New option.
(--enable-new-dtags): Remove mention of DT_FLAGS.
2016-11-21 Igor Kudrin <ikudrin@accesssoftek.com>
gold/
* layout.cc: Include windows.h and rpcdce.h (for MinGW32).
(Layout::create_build_id): Generate uuid using UuidCreate().
This fix keeps the section with the highest alignment when folding sections with ICF.
PR gold/17704
* icf.cc (match_sections): Add new parameter section_addraligns.
Check section alignment and keep the section with the strictest
alignment.
(find_identical_sections): New local variable section_addraligns.
Store each section's alignment.
* testsuite/pr17704a_test.s: New file.
* testsuite/Makefile.am (pr17704a_test): New test.
* testsuite/Makefile.in: Regenerate.
When we see an unversioned symbol reference in a shared library, followed
by a default definition of the symbol in another shared library, we were
treating them as separate symbols. That should only happen when both are
definitions.
gold/
PR gold/20238
* symtab.cc (Symbol_table::define_default_version): Check that
unversioned symbol is defined.
This patch adds a little more debug output, and replaces two variables
with one, tracking current max group size by group_size_ rather than
by has14_.
* powerpc.cc (class Stub_control): Delete stub14_group_size_
and has14_. Add group_size_.
(Stub_control::can_add_to_stub_group): Adjust to suit. Print
debug info when switching to adding sections before stubs.
This patch rewrites the rather obscure can_add_to_stub_group, fixing
a problem with the handling of sections containing conditional
external branches. When a section group contains any such section,
the group size needs to be limited to a much smaller size than groups
with only non-conditional external branches.
PR 20523
* powerpc.cc (class Stub_control): Add has14_. Comment owner_.
(Stub_control::can_add_to_stub_group): Correct grouping of
sections containing 14-bit external branches. When returning
false, set state_ to reflect the fact that we have one section
for the next group. Rewrite most of function for clarity.
Add and expand comments.
(Target_powerpc::do_relax): Print stub group size retry in hex.
gold/ChangeLog
2016-08-26 Han Shen <shenhan@google.com>
* powerpc.cc (Stub_table::min_size_threshold_): New member to
limit size.
(Stub_table::set_min_size_threshold): New member function.
(Stub_table::set_address_and_size): Add code to only allow size
increase.
(Target_powerpc::do_relax): Add code to record last size.
Build the test objects with the in-tree assembler. Also fix some cascading
error messages caused by not resetting the skip_call_tls_get_addr_ flag
after printing the error.
gold/
* i386.cc (Target_i386): Reset skip_call_tls_get_addr_ after printing
error message.
* testsuite/Makefile.am (pr20216a): Add missing dependencies.
(pr20308a): Add -Bgcctestdir/ to compile rules.
* testsuite/Makefile.in: Regenerate.
With some versions of gas, the call to tls_get_addr uses a GOTPCREL
relocation instead of a GOTPCRELX relocation. We should allow for that
when skip_call_tls_get_addr_ is true. We should also build the test
objects with the in-tree assembler.
This patch also fixes some cascading error messages caused by not
resetting the skip_call_tls_get_addr_ flag after printing the error.
gold/
PR gold/20216
* x86_64.cc (Target_x86_64::Relocate::relocate): Add check for
R_X86_64_GOTPCREL. Reset skip_call_tls_get_addr_ after printing
error message.
* testsuite/Makefile.am (pr20216_gd.o): Add -Bgcctestdir/.
(pr20216_ld.o): Likewise.
* testsuite/Makefile.in: Regenerate.
2016-08-10 James Clarke <jrtc27@jrtc27.com>
gold/
PR gold/20443
* symtab.cc (Symbol_table::add_from_relobj): Handle NULL symbols,
which will be present for STT_SPARC_REGISTER.
(Symbol_table::add_from_pluginobj): Likewise.
(Symbol_table::add_from_dynobj): Likewise.
(Symbol_table::add_from_incrobj): Removed dead code.
The fall-through in Target_sparc::Relocate::relocate for
R_SPARC_GOTDATA_OP_LOX10 is currently R_SPARC_GOT13, but should
clearly be R_SPARC_GOT10. GCC has been seen to emit a sethi/xor
rather than a sethi/or sequence to load a 32-bit immediate, but
if R_SPARC_GOT13 is used then bits 10-12 get zeroed out as both
the sethi and xor immediates contain them.
gold/
PR gold/20442
* sparc.cc (Target_sparc::Relocate::relocate): R_SPARC_GOTDATA_OP_LOX10
should fall back on R_SPARC_GOT10, not R_SPARC_GOT13.
This CL implemented the following relocs for AArch64 target.
- R_AARCH64_MOVW_UABS_G*
- R_AARCH64_MOVW_SABS_G* relocations
gold/ChangeLog
2016-07-26 Igor Kudrin <ikudrin@accesssoftek.com>
* aarch64-reloc-property.cc (Rvalue_bit_select_impl): New class.
(rvalue_bit_select): Use Rvalue_bit_select_impl.
* aarch64-reloc.def (MOVW_UABS_G0, MOVW_UABS_G0_NC,
MOVW_UABS_G1,
MOVW_UABS_G1_NC, MOVW_UABS_G2, MOVW_UABS_G2_NC, MOVW_UABS_G3,
MOVW_SABS_G0, MOVW_SABS_G1, MOVW_SABS_G2): New relocations.
* aarch64.cc (Target_aarch64::Scan::local): Add cases for new
MOVW_UABS_* and MOVW_SABS_* relocations.
(Target_aarch64::Scan::global): Likewise.
(Target_aarch64::Relocate::relocate): Add cases and handlings
for new MOVW_UABS_* and MOVW_SABS_* relocations.
* testsuite/Makefile.am (aarch64_relocs): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_globals.s: New test source file.
* testsuite/aarch64_relocs.s: Likewise.
* testsuite/aarch64_relocs.sh: New test script.
With GCC 6 when not using -static-libstdc++, the operator delete(void*)
function is defined in the shared C++ support library, rather than in
the main program. The test script is too aggressive in checking for
this symbol's presence among the exported symbols. This patch removes
the check for that symbol.
gold/
PR gold/20310
* testsuite/dynamic_list.sh: Remove check for _ZdlPv.
There are extensions to 386 psABI:
https://groups.google.com/forum/#!topic/ia32-abi/awsRSvJOJfs
to call tls_get_addr via GOT:
call *___tls_get_addr@GOT(%reg)
where EBX register isn't required as GOT base.
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, 7-byte lea instruction before call
instruction is replaced by 6-byte one to make room for indirect call.
For local dynamic model, we simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction
patterns. For local dynamic model to local exec model transition,
we generate a 6-byte lea instruction as nop, instead of a 1-byte nop
plus a 4-byte lea instruction.
PR gold/20308
* i386.cc (Target_i386::Relocate::relocate): Allow
R_386_GOT32X relocation against ___tls_get_addr.
(Target_i386::Relocate::tls_gd_to_ie): Support indirect
call to __tls_get_addr.
(Target_i386::Relocate::tls_gd_to_le): Likewise.
(Target_i386::Relocate::tls_ld_to_le): Likewise.
* testsuite/Makefile.am (check_PROGRAMS): Add pr20308a_test,
pr20308b_test, pr20308c_test, pr20308d_test, pr20308e_test.
(pr20308a_test_SOURCES): New.
(pr20308a_test_DEPENDENCIES): Likewise.
(pr20308a_test_CFLAGS): Likewise.
(pr20308a_test_LDFLAGS): Likewise.
(pr20308a_test_LDADD): Likewise.
(pr20308b_test_SOURCES): Likewise.
(pr20308b_test_DEPENDENCIES): Likewise.
(pr20308b_test_CFLAGS): Likewise.
(pr20308b_test_LDFLAGS): Likewise.
(pr20308b_test_LDADD): Likewise.
(pr20308c_test_SOURCES): Likewise.
(pr20308c_test_DEPENDENCIES): Likewise.
(pr20308c_test_CFLAGS): Likewise.
(pr20308c_test_LDFLAGS): Likewise.
(pr20308c_test_LDADD): Likewise.
(pr20308d_test_SOURCES): Likewise.
(pr20308d_test_DEPENDENCIES): Likewise.
(pr20308d_test_CFLAGS): Likewise.
(pr20308d_test_LDFLAGS): Likewise.
(pr20308d_test_LDADD): Likewise.
(pr20308e_test_SOURCES): Likewise.
(pr20308e_test_DEPENDENCIES): Likewise.
(pr20308e_test_CFLAGS): Likewise.
(pr20308e_test_LDFLAGS): Likewise.
(pr20308e_test_LDADD): Likewise.
(pr20308a.so): Likewise.
(pr20308b.so): Likewise.
(pr20308_gd.o): Likewise.
(pr20308_ld.o): Likewise.
(MOSTLYCLEANFILES): Add pr20308a.so pr20308b.so.
* testsuite/Makefile.in: Regenerated.
* testsuite/pr20308_def.c: New file.
* testsuite/pr20308_gd.S: Likewise.
* testsuite/pr20308_ld.S: Likewise.
* testsuite/pr20308_main.c: Likewise.
There are extensions to x86-64 psABI:
https://groups.google.com/forum/#!topic/x86-64-abi/de5_KnLHxtI
to call tls_get_addr via GOT:
call *__tls_get_addr@GOTPCREL(%rip)
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, one 0x66 prefix before call instruction is
removed to make room for indirect call. For local dynamic model, we
simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction
patterns. For local dynamic model to local exec model transition, we
generate 4 0x66 prefixes, instead of 3, before mov instruction in 64-bit
and generate a 5-byte nop, instead of 4-byte, before mov instruction in
32-bit.
PR gold/20216
* configure.ac (DEFAULT_TARGET_X86_64_OR_X32): New
AM_CONDITIONAL.
* configure: Regenerated.
* x86_64.cc (Target_x86_64<size>::Relocate::relocate): Allow
R_X86_64_GOTPCRELX relocation against __tls_get_addr.
(Target_x86_64<size>::Relocate::tls_gd_to_ie): Support indirect
call to __tls_get_addr.
(Target_x86_64<size>::Relocate::tls_gd_to_le): Likewise.
(Target_x86_64<size>::Relocate::tls_ld_to_le): Likewise.
* testsuite/Makefile.am (check_PROGRAMS): Add pr20216a_test,
pr20216b_test, pr20216c_test, pr20216d_test, pr20216e_test.
(pr20216a_test_SOURCES): New.
(pr20216a_test_DEPENDENCIES): Likewise.
(pr20216a_test_CFLAGS): Likewise.
(pr20216a_test_LDFLAGS): Likewise.
(pr20216a_test_LDADD): Likewise.
(pr20216b_test_SOURCES): Likewise.
(pr20216b_test_DEPENDENCIES): Likewise.
(pr20216b_test_CFLAGS): Likewise.
(pr20216b_test_LDFLAGS): Likewise.
(pr20216b_test_LDADD): Likewise.
(pr20216c_test_SOURCES): Likewise.
(pr20216c_test_DEPENDENCIES): Likewise.
(pr20216c_test_CFLAGS): Likewise.
(pr20216c_test_LDFLAGS): Likewise.
(pr20216c_test_LDADD): Likewise.
(pr20216d_test_SOURCES): Likewise.
(pr20216d_test_DEPENDENCIES): Likewise.
(pr20216d_test_CFLAGS): Likewise.
(pr20216d_test_LDFLAGS): Likewise.
(pr20216d_test_LDADD): Likewise.
(pr20216e_test_SOURCES): Likewise.
(pr20216e_test_DEPENDENCIES): Likewise.
(pr20216e_test_CFLAGS): Likewise.
(pr20216e_test_LDFLAGS): Likewise.
(pr20216e_test_LDADD): Likewise.
(pr20216a.so): Likewise.
(pr20216b.so): Likewise.
(pr20216_gd.o): Likewise.
(pr20216_ld.o): Likewise.
(MOSTLYCLEANFILES): Add pr20216a.so pr20216b.so.
* testsuite/Makefile.in: Regenerated.
* testsuite/pr20216_def.c: New file.
* testsuite/pr20216_gd.S: Likewise.
* testsuite/pr20216_ld.S: Likewise.
* testsuite/pr20216_main.c: Likewise.
PowerPC gcc aligns char arrays to a word which results in the test
failing since it expects a char alignment. As the test already uses
gcc attributes to assign variables to sections, we may as well use an
attribute to align too.
* testsuite/plugin_layout_with_alignment.c: Explicitly align all
variables.
A target like powerpc64 that is PIC by default doesn't need copy relocs.
* testsuite/Makefile.am (copy_test_protected): Disable for powerpc.
* testsuite/Makefile.in: Regenerate.
According to "ELF for the ARM(r) 64-bit Architecture (AArch64)",
this relocation can be used "to prevent removal of sections that
might otherwise appear to be unused."
gold/
* aarch64-reloc.def (NONE): New relocation.
* aarch64.cc (Target_aarch64::Scan::local): Handle R_AARCH64_NONE.
(Target_aarch64::Scan::global): Likewise.
* testsuite/Makefile.am (aarch64_reloc_none): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_reloc_none.s: New test source file.
* testsuite/aarch64_reloc_none.sh: New test script.
Please see patch discussion:
https://www.sourceware.org/ml/binutils/2016-05/msg00322.html
2016-06-28 Sriraman Tallam <tmsriram@google.com>
* x86_64.cc (Lazy_view): New class.
(can_convert_mov_to_lea): Templatize function. Make the function
check for appropriate relocation types and use the view parameter
to get section contents.
(can_convert_callq_to_direct): New function.
(Target_x86_64<size>::Scan::global): Refactor.
(Target_x86_64<size>::Relocate::relocate): Refactor. Change any indirect
call via GOT that can be converted.
* testsuite/Makefile.am (x86_64_indirect_call_to_direct.sh): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/x86_64_indirect_call_to_direct1.s: New file.
* testsuite/x86_64_indirect_jump_to_direct1.s: New file.
bfd * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Don't convert
R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.
gold * sparc.cc (Target_sparc::Scan::local): Don't convert R_SPARC_32
to R_SPARC_RELATIVE if class is ELFCLASS64.
(Target_sparc::Scan::global): Likewise.
ld * testsuite/ld-elf/symbolic-func.r: Allow non-zero offsets from
.text.
The fix for PR 15370 did not correctly check all patterns in a group,
but instead threw all unassigned sections into the group. This patch
fixes that.
2016-06-23 Cary Coutant <ccoutant@gmail.com>
Igor Kudrin <ikudrin@accesssoftek.com>
gold/
PR gold/15370
* script-sections.cc
(Output_section_element_input::set_section_addresses): Keep bin_count
separate from input_pattern_count.
* testsuite/script_test_12.t: Add another section .x4.
* testsuite/script_test_12i.t: Likewise.
* testsuite/script_test_12a.c: Likewise.
* testsuite/script_test_12b.c: Likewise.
Add a configure option --enable-relro to decide whether -z relro should
be enabled by default. Default to yes.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro and default
to 1.
* config.in: Regenerated.
* configure: Likewise.
* options.h (General_options::relro): Default to
DEFAULT_LD_Z_RELRO.
If there is no PLT in output, return 0 for first_plt_entry_offset and
plt_entry_size.
PR gold/20245
* i386.cc (Target_i386::first_plt_entry_offset): Return 0 if
plt_ is NULL.
(Target_i386::plt_entry_size): Likewise.
(Target_x86_64<size>::first_plt_entry_offset): Likewise.
(Target_x86_64<size>::plt_entry_size): Likewise.
Includes DT_MIPS_RLD_MAP and DT_MIPS_RLD_MAP_REL dynamic tags and
__RLD_MAP symbol.
2016-06-20 Vladimir Radosavljevic <Vladimir.Radosavljevic@imgtec.com>
elfcpp/
* elfcpp.h (DT_MIPS_RLD_MAP_REL): New enum constant.
gold/
* mips.cc (Target_mips::Target_mips): Initialize rld_map_.
(Target_mips::rld_map_): New data member.
(Target_mips::do_finalize_sections): Add support for
DT_MIPS_RLD_MAP and DT_MIPS_RLD_MAP_REL dynamic tags,
.rld_map section, and __RLD_MAP symbol.
(Target_mips::do_dynamic_tag_custom_value): Add support for
DT_MIPS_RLD_MAP_REL dynamic tag.
* output.cc (Output_data_dynamic::get_entry_offset): New method
definition.
* output.h (Output_data_dynamic::get_entry_offset): New method
declaration.
elfcpp/
* mips.h (R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16, R_MIPS_PCLO16): New enums for
Mips32r6 and Mips64r6 relocations.
(r6_isa): New function.
gold/
* mips.cc (relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(hi16_reloc): Add support for R_MIPS_PCHI16 relocation.
(is_matching_lo16_reloc): Likewise.
(lo16_reloc): Add support for R_MIPS_PCLO16 relocation.
(Mips_output_data_plt::plt_entry_r6): New static data member for
R6 PLT entry.
(Target_mips::is_output_r6): New method.
(Target_mips::Mips_mach): Add new enum constants.
(Mips_relocate_functions::Status): Likewise.
(Mips_relocate_functions::pchi16_relocs): New static data member.
(Mips_relocate_functions::relpc21): New method.
(Mips_relocate_functions::relpc26): Likewise.
(Mips_relocate_functions::relpc18): Likewise.
(Mips_relocate_functions::relpc19): Likewise.
(Mips_relocate_functions::relpchi16): Likewise.
(Mips_relocate_functions::do_relpchi16): Likewise.
(Mips_relocate_functions::relpclo16): Likewise.
(Mips_output_data_plt::do_write): Add support for Mips r6 plt
entry.
(Target_mips::mips_32bit_flags): Add E_MIPS_ARCH_32R6 support.
(Target_mips::elf_mips_mach): Add E_MIPS_ARCH_32R6 and
E_MIPS_ARCH_64R6 support.
(Target_mips::update_abiflags_isa): Likewise.
(mips_get_size_for_reloc): Add support for relocs: R_MIPS_PCHI16,
R_MIPS_PCLO16, R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3 and
R_MIPS_PC19_S2.
(Target_mips::Scan::local): Add support for relocs: R_MIPS_PCHI16
and R_MIPS_PCLO16.
(Target_mips::Scan::global): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(Target_mips::Relocate::relocate): Call functions for resolving
Mips32r6 and Mips64r6 relocations, and print error message for
STATUS_PCREL_UNALIGNED.
(Target_mips::Scan::get_reference_flags): Add support for relocs:
R_MIPS_PCHI16, R_MIPS_PCLO16, R_MIPS_PC21_S2, R_MIPS_PC26_S2,
R_MIPS_PC18_S3 and R_MIPS_PC19_S2.
(Target_mips::elf_mips_mach_name): Add E_MIPS_ARCH_32R6 and
E_MIPS_ARCH_64R6 support.
The .got.plt section must be placed right after the .got section.
Otherwise, GOT offset will be wrong.
PR gold/20246
* testsuite/script_test_2.t: Add .got.plt after .got.
gold/
* mips.cc (Mips_relobj::Mips_relobj): Initialize
has_reginfo_section_.
(Mips_relobj::has_reginfo_section_): New data member.
(Mips_relobj::has_reginfo_section): New method.
(class Mips_output_section_reginfo): Change base class to
Output_section_data, and set masks of the output .reginfo section
in constructor.
(Mips_output_section_reginfo::as_mips_output_section_reginfo):
Remove.
(Mips_output_section_reginfo::set_masks): Likewise.
(Mips_output_section_reginfo::set_final_data_size): Likewise.
(Mips_output_section_reginfo::do_print_to_mapfile): New method.
(Target_mips::do_make_output_section): Remove.
(Mips_relobj::do_read_symbols): Set has_reginfo_section_ to true
if the object contains a .reginfo section.
(Target_mips::do_finalize_sections): Create a .reginfo output
section if needed.
* mips.cc (Mips_got_entry::Mips_got_entry): Remove object argument
for global got symbols, and set addend to 0.
(Mips_got_entry::hash): Change hash algorithm.
(Mips_got_entry::equals): Refactor.
(Mips_got_entry::object): Return input object for local got symbols
from union d.
(Mips_got_entry::addend): Change return of the relocation addend.
(Mips_got_entry::addend_): Move from union d.
(Mips_got_entry::object_): Move into union d.
(class Mips_symbol_hash): New class.
(Mips_got_info::Global_got_entry_set): New type.
(Mips_got_info::global_got_symbols): Change return type to
Global_got_entry_set.
(Mips_got_info::global_got_symbols_): Change type to
Global_got_entry_set.
(Mips_symbol::hash): New method.
(Mips_output_data_la25_stub::symbols_): Change type to std::vector.
(Mips_output_data_mips_stubs::Mips_stubs_entry_set): New type.
(Mips_output_data_mips_stubs::symbols_): Change type to
Mips_stubs_entry_set.
(Mips_got_info::record_global_got_symbol): Don't pass object
argument when creating global got symbol.
(Mips_got_info::record_got_entry): Remove find before inserting
got entries.
(Mips_got_info::add_reloc_only_entries): Change type of iterator
to Global_got_entry_set.
(Mips_got_info::count_got_symbols): Likewise.
(Mips_output_data_la25_stub::create_la25_stub): Use push_back
for adding entries to symbols_.
(Mips_output_data_la25_stub::do_write): Change type of iterator
to std::vector.
(Mips_output_data_mips_stubs::set_lazy_stub_offsets): Change type
of iterator to Mips_stubs_entry_set.
(Mips_output_data_mips_stubs::set_needs_dynsym_value): Likewise.
(Mips_output_data_mips_stubs::do_write): Likewise.
In PR 16979, a reference to malloc is being resolved to an unversioned
reference in libmalloc.so. When linked with --as-needed, however, the
dynamic table does not list libmalloc.so as a DT_NEEDED library.
If we have a reference to an unversioned symbol in a shared object,
and we later see a versioned definition in another shared object, we
were overriding the first definition with the second in the process of
defining the default version. As a result, we no longer think that the
first shared object was actually needed to resolve any symbols, and we
don't list it as a DT_NEEDED library.
This patch fixes the problem by treating the two definitions as separate
symbols, so the second definition does not override the first.
2016-03-30 Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/16979
* symtab.cc (Symbol_table::define_default_version): Check for case
where symbols are both in different shared objects.
bfd * warning.m4 (GCC_WARN_CFLAGS): Only add -Wstack-usage if using a
sufficiently recent version of GCC.
* configure: Regenerate.
others * configure: Regenerate.
During LTO, if (1) an IR file contains a COMDAT group that is kept,
(2) a later non-claimed file contains the same group, which we discard,
and (3) the plugin fails to provide a definition of the symbols in that
COMDAT group, gold silently resolves any references to those symbols
to 0.
This patch adds a check for a placeholder symbol when deciding
whether to issue an undefined symbol error. It also adds an extra
note after any undefined placeholder symbol error that explains
that a definition was expected from the plugin.
gold/
PR gold/19842
* errors.cc (Errors::undefined_symbol): Add info message when
symbol should have been provided by a plugin.
* target-reloc.h (issue_undefined_symbol_error): Check for
placeholder symbols defined in discarded sections.
* testsuite/Makefile.am (plugin_test_9b): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test_9b_elf.cc: New test source file.
* testsuite/plugin_test_9b_ir.cc: New test source file.
When running ld -r on objects that have comdat groups, when gold
deduplicates a function in a comdat group, it removes the relocations
from the EH information that referred to the dropped copy of the function.
When running a final link using the result of the -r link, the missing
relocation cause it to fail to recognize the FDE for the dropped
function.
This patch improves gold's FDE scanning to take into account the
possibility that an FDE corresponds to a dropped function, and drops
that FDE as well.
Gnu ld, on the other hand, leaves the relocations in the ld -r output,
but makes them R_NONE with an r_sym field of 0. This was sufficient to
let both linkers recognize the FDE properly.
With this fix, if you do an ld -r with gold, then do the final link with
Gnu ld, the .eh_frame_hdr section will not be generated. To make it work
with Gnu ld, we would have to leave the R_NONE relocations in, but I
think it's better to drop the relocations entirely. I'd hope that if
you're doing a -r link with gold, you'll also do the final link with
gold.
gold/
PR gold/19002
* ehframe.cc (Eh_frame::read_fde): Check for dropped functions.
* testsuite/Makefile.am (eh_test_2): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/eh_test_2.sh: New test script.
* testsuite/eh_test_a.cc (bar): Make it comdat.
* testsuite/eh_test_b.cc (bar): Add a duplicate copy.
gold/
* mips.cc (enum Special_relocation_symbol): New enum type.
(is_readonly_section): New function.
(eh_reloc): Likewise.
(Mips_got_entry::is_section_symbol_): New member.
(Mips_got_entry::is_section_symbol): New method.
(Mips_got_info::record_local_got_symbol): Add is_section_symbol
argument.
(Mips_relobj::mips_elf_options_section_name): New method.
(Mips_output_data_got::record_local_got_symbol): Add
is_section_symbol argument, and pass it to
Mips_got_info::record_local_got_symbol.
(Mips_output_data_got::got_offset): Add addend argument, and pass
it to Relobj::local_got_offset.
(struct Mips_output_reloc_writer): New type.
(class Mips_output_data_reloc): New class.
(Mips_output_data_plt::Reloc_section): Change type to
Mips_output_data_reloc.
(Target_mips::Reloc_section): Likewise.
(Mips_reloc_types::get_r_addend): Remove unsigned from return type.
(Mips_classify_reloc::get_r_type2): New method.
(Mips_classify_reloc::get_r_type3): Likewise.
(Mips_classify_reloc::get_r_ssym): Likewise.
(Target_mips::Reloca_section): Remove.
(Relocate::should_apply_static_reloc): Rename from
should_apply_r_mips_32_reloc.
(Target_mips::copy_reloc): Replace Reltype parameter with r_type
and r_offset.
(Mips_relocate_functions::Valtype): New type.
(Mips_relocate_functions::Valtype64): New type.
(Mips_relocate_functions::check_overflow): New method.
(Mips_relocate_functions::mips_reloc_unshuffle): Move to public
interface.
(Mips_relocate_functions::mips_reloc_shuffle): Likewise.
(Mips_relocate_functions::rel16): Add support for resolving
relocations for Mips64.
(Mips_relocate_functions::rel32): Likewise.
(Mips_relocate_functions::reljalr): Likewise.
(Mips_relocate_functions::relpc32): Likewise.
(Mips_relocate_functions::rel26): Likewise.
(Mips_relocate_functions::relpc16): Likewise.
(Mips_relocate_functions::relmicromips_pc7_s1): Likewise.
(Mips_relocate_functions::relmicromips_pc10_s1): Likewise.
(Mips_relocate_functions::relmicromips_pc16_s1): Likewise.
(Mips_relocate_functions::do_relhi16): Likewise.
(Mips_relocate_functions::do_relgot16_local): Likewise.
(Mips_relocate_functions::rello16): Likewise.
(Mips_relocate_functions::relgot): Likewise.
(Mips_relocate_functions::relgotpage): Likewise.
(Mips_relocate_functions::relgotofst): Likewise.
(Mips_relocate_functions::relgot_hi16): Likewise.
(Mips_relocate_functions::relgot_lo16): Likewise.
(Mips_relocate_functions::relgprel): Likewise.
(Mips_relocate_functions::relgprel32): Likewise.
(Mips_relocate_functions::tlsrelhi16): Likewise.
(Mips_relocate_functions::tlsrello16): Likewise.
(Mips_relocate_functions::tlsrel32): Likewise.
(Mips_relocate_functions::relsub): Likewise.
(Mips_relocate_functions::releh): New method.
(Mips_relocate_functions::rel64): Likewise.
(Mips_got_info::record_local_got_symbol): Add is_section_symbol and
pass it to Mips_got_entry.
(Mips_got_info::add_local_entries): Pass addend argument
to code functions, and for STT_SECTION symbols call
add_symbolless_local_addend.
(Mips_got_info::add_tls_entries): Pass addend argument to code
functions.
(Mips_relobj::do_read_symbols): Read gp value that was used to
create object.
(Mips_output_data_plt::plt_entry): Remove opcode from l[wd]
instruction. Opcode for instruction will be selected later.
(Target_mips::gc_process_relocs): Add case for SHT_RELA.
(Target_mips::scan_relocatable_relocs): Likewise.
(Target_mips::emit_relocs_scan): Likewise.
(Target_mips::relocate_relocs): Likewise.
(Target_mips::do_finalize_sections): Skip objects for merging
processor specific flags in which all input sections will be
discarded.
(mips_get_size_for_reloc): Add case for R_MIPS_EH.
(Target_mips::Scan::get_reference_flags): Likewise.
(Target_mips::relocate_special_relocatable): Call rel26 method with
calculate_only and calculated_value arguments.
(Target_mips::Scan::local): Add case for R_MIPS_EH. Don't create a
dynamic relocation against a readonly sections, and pass
is_section_symbol to Mips_got_info::record_local_got_symbol.
(Target_mips::Scan::global): Add case for R_MIPS_EH. Don't create a
dynamic relocation against a readonly sections, and pass r_type
and r_offset to Target_mips::copy_reloc.
(Target_mips::Relocate::relocate): Add support for resolving
relocations for Mips64.
(Target_mips::mips_info): Add case for Mips64 default dynamic
linker name.
(Target_selector_mips): Correct emulation names.
G++ in GCC 4.2 silently ignores
---
__attribute__ ((section(".rodata.v1_a2")))
const short rodata_item1 = 101;
---
which leads to plugin_layout_with_alignment test failure with
Expected 12 sections, found 8 sections
since 4 .rodata sections are missing. As a workaround, this patch
changes plugin_layout_with_alignment test from C++ to C.
* testsuite/plugin_layout_with_alignment.cc: Renamed to ..
* testsuite/plugin_layout_with_alignment.c: This.
* testsuite/Makefile.am (plugin_layout_with_alignment.o): Updated.
(plugin_layout_with_alignment): Likewise.
* testsuite/Makefile.in: Regenerated.
GCC 6 does not generate constructors for two of gold's test cases.
This patch simply removes the checks for them.
gold/
PR 19751
* testsuite/Makefile.am (retain_symbols_file_test): Remove check
for constructor.
* testsuite/Makefile.in: Regenerate.
* testsuite/dynamic_list.sh: Likewise.
* testsuite/retain_symbols_file_test.sh: Likewise.
This patch is a simple refactoring that will allow the MIPS backend to
replace the Output_data_reloc_base::do_write() method without copying
its entire implementation. I've moved the implementation of do_write()
into a function template, which can be instantiated with a custom
class to write the MIPS-specific relocation format. The custom class
for MIPS needs access to the symbol index and address from
Output_reloc, so I've included the part of Vlad's MIPS-64 patch that
makes those accessor methods public.
2016-03-08 Cary Coutant <ccoutant@gmail.com>
Vladimir Radosavljevic <vladimir.radosavljevic@imgtec.com>
gold/
* output.cc (Output_reloc_writer): New type.
(Output_data_reloc_base::do_write): Move implementation to template
in output.h and replace with invocation of template.
* output.h (Output_file): Move to top of file.
(Output_reloc::get_symbol_index): Move to public interface.
(Output_reloc::get_address): Likewise.
(Output_data_reloc_base::do_write_generic): New function template.
gold/
PR gold/19019
* layout.h (Layout::add_target_specific_dynamic_tag): New function.
* layout.cc (Layout::add_target_specific_dynamic_tag): New function.
* mips.cc (Target_mips::make_symbol): Adjust function signature.
* sparc.cc (Target_sparc::Target_sparc): Initialize register_syms_.
(Target_sparc::do_is_defined_by_abi): Remove test for
STT_SPARC_REGISTER.
(Target_sparc::Register_symbol): New struct type.
(Target_sparc::register_syms_): New data member.
(Target_sparc<64, true>::sparc_info): Set has_make_symbol to true.
(Target_sparc::make_symbol): New function.
(Target_sparc::do_finalize_sections): Add register symbols and new
dynamic table entries.
* symtab.h (Sized_symbol::init_undefined): Add value parameter.
(Symbol_table::add_target_global_symbol): New function.
(Symbol_table::target_symbols_): New data member.
* symtab.cc (Sized_symbol::init_undefined): Add value parameter.
(Symbol_table::Symbol_table): Initialize target_symbols_.
(Symbol_table::add_from_object): Pass additional parameters to
Target::make_symbol.
(Symbol_table::define_special_symbol): Likewise.
(Symbol_table::add_undefined_symbol_from_command_line): Pass 0 for
undefined symbol value.
(Symbol_table::set_dynsym_indexes): Process target-specific symbols.
(Symbol_table::sized_finalize): Likewise.
(Symbol_table::sized_write_globals): Likewise.
* target.h (Sized_target::make_symbol): Add name, st_type, object,
st_shndx, and value parameters.
include/
2016-03-03 Than McIntosh <thanm@google.com>
* plugin-api.h: Add new hooks to the plugin transfer vector to
to support querying section alignment and section size.
(ld_plugin_get_input_section_alignment): New hook.
(ld_plugin_get_input_section_size): New hook.
(ld_plugin_tag): Add LDPT_GET_INPUT_SECTION_ALIGNMENT
and LDPT_GET_INPUT_SECTION_SIZE.
(ld_plugin_tv): Add tv_get_input_section_alignment and
tv_get_input_section_size.
gold/
2016-03-03 Than McIntosh <thanm@google.com>
* plugin.cc (Plugin::load): Include hooks for get_input_section_size
and get_input_section_alignment in transfer vector.
(get_input_section_alignment): New function.
(get_input_section_size): New function.
* testsuite/Makefile.am: Add plugin_layout_with_alignment.sh test.
* testsuite/Makefile.in: [Regenerate.]
* testsuite/plugin_section_alignment.cc: New test file.
* testsuite/plugin_layout_with_alignment.cc: New test file.
* testsuite/plugin_layout_with_alignment.sh: New test file.
Let the plugin know that a file is not being included in the link by
returning LDPS_NO_SYMS from get_symbols().
include/
* plugin-api.h (enum ld_plugin_tag): Add LDPT_GET_SYMBOLS_V3.
gold/
* plugin.h (Pluginobj::get_symbol_resolution_info): Add version
parameter.
* plugin.cc (get_symbols_v3): New function.
(Plugin::load): Add LDPT_GET_SYMBOLS_V3.
(Pluginobj::get_symbol_resolution_info): Return LDPS_NO_SYMS when using
new version.
