mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-11-30 13:33:53 +08:00
master
732 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tom de Vries
|
9dec38d3b1 |
[gdb/symtab] Support -readnow during reread
When running test-case gdb.base/cached-source-file.exp with target board readnow, we run into: ... FAIL: gdb.base/cached-source-file.exp: rerun program (the program exited) ... The problem is that when rereading, the readnow is ignored. Fix this by copying the readnow handling code from symbol_file_add_with_addrs to reread_symbols. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26800 |
||
Andrew Burgess
|
0c1e6e265b |
gdb: introduce a new overload of target_can_async_p
There are a few places where we call the target_ops::can_async_p member function directly, instead of using the target_can_async_p wrapper. In some of these places this is because we need to ask before the target has been pushed, and in another location (in target.c) it seems unnecessary to go through the wrapper when we are already in target.c code. However, in the next commit I'd like to hoist some common checks out of target specific code into target.c. To achieve this, in this commit, I introduce a new overload of target_can_async_p which takes a target_ops pointer, and calls the ::can_async_p method directly. I then make use of the new overload where appropriate. There should be no user visible changes after this commit. |
||
Simon Marchi
|
6f4cb31cf2 |
gdb: tweak scoped_disable_commit_resumed uses when resuming all threads in non-stop
When doing "continue -a" in non-stop mode, each thread is individually
resumed while the commit resumed state is enabled. This forces the
target to commit each resumption immediately, instead of being able to
batch things.
The reason is that there is no scoped_disable_commit_resumed around the
loop over threads in continue_1, when "non_stop && all_threads" is true.
Since the proceed function is called once for each thread, the
scoped_disable_commit_resumed in proceed therefore forces commit-resumed
between each thread resumption. Add the necessary
scoped_disable_commit_resumed in continue_1 to avoid that.
I looked at the MI side of things, the function exec_continue, and found
that it was correct. There is a similar iteration over threads, and
there is a scoped_disable_commit_resumed at the function scope. This is
not wrong, but a bit more than we need. The branches that just call
continue_1 do not need it, as continue_1 takes care of disabling commit
resumed. So, move the scoped_disable_commit_resumed to the inner scope
where we iterate on threads and proceed them individually.
Here's an example debugging a multi-threaded program attached by
gdbserver (debug output trimmed for brevity):
$ ./gdb -nx -q --data-directory=data-directory -ex "set non-stop" -ex "tar rem :1234"
(gdb) set debug remote
(gdb) set debug infrun
(gdb) c -a
Continuing.
[infrun] proceed: enter
[infrun] scoped_disable_commit_resumed: reason=proceeding
[remote] Sending packet: $vCont;c:p14388.14388#90
[infrun] reset: reason=proceeding
[infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
[infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
[infrun] proceed: exit
[infrun] proceed: enter
[infrun] scoped_disable_commit_resumed: reason=proceeding
[remote] Sending packet: $vCont;c:p14388.1438a#b9
[infrun] reset: reason=proceeding
[infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
[infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
[infrun] proceed: exit
... and so on for each thread ...
Notice how we send one vCont;c for each thread. With the patch applied, we
send a single vCont;c at the end:
[infrun] scoped_disable_commit_resumed: reason=continue all threads in non-stop
[infrun] proceed: enter
[infrun] scoped_disable_commit_resumed: reason=proceeding
[infrun] reset: reason=proceeding
[infrun] proceed: exit
[infrun] clear_proceed_status_thread: Thread 85790.85792
[infrun] proceed: enter
[infrun] scoped_disable_commit_resumed: reason=proceeding
[infrun] reset: reason=proceeding
[infrun] proceed: exit
... proceeding threads individually ...
[infrun] reset: reason=continue all threads in non-stop
[infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
[infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
[remote] Sending packet: $vCont;c#a8
Change-Id: I331dd2473c5aa5114f89854196fed2a8fdd122bb
|
||
|
Simon Marchi
|
313f3b21cb |
gdb: remove bpstat typedef, rename bpstats to bpstat
I don't find that the bpstat typedef, which hides a pointer, is particularly useful. In fact, it confused me many times, and I just see it as something to remember that adds cognitive load. Also, with C++, we might want to be able to pass bpstats objects by const-reference, not necessarily by pointer. So, remove the bpstat typedef and rename struct bpstats to bpstat (since it represents one bpstat, it makes sense that it is singular). Change-Id: I52e763b6e54ee666a9e045785f686d37b4f5f849 |
||
|
Simon Marchi
|
50888e42dc |
gdb: change functions returning value contents to use gdb::array_view
The bug fixed by this [1] patch was caused by an out-of-bounds access to a value's content. The code gets the value's content (just a pointer) and then indexes it with a non-sensical index. This made me think of changing functions that return value contents to return array_views instead of a plain pointer. This has the advantage that when GDB is built with _GLIBCXX_DEBUG, accesses to the array_view are checked, making bugs more apparent / easier to find. This patch changes the return types of these functions, and updates callers to call .data() on the result, meaning it's not changing anything in practice. Additional work will be needed (which can be done little by little) to make callers propagate the use of array_view and reap the benefits. [1] https://sourceware.org/pipermail/gdb-patches/2021-September/182306.html Change-Id: I5151f888f169e1c36abe2cbc57620110673816f3 |
||
Simon Marchi
|
183be22290 |
gdb, gdbserver: make target_waitstatus safe
I stumbled on a bug caused by the fact that a code path read
target_waitstatus::value::sig (expecting it to contain a gdb_signal
value) while target_waitstatus::kind was TARGET_WAITKIND_FORKED. This
meant that the active union field was in fact
target_waitstatus::value::related_pid, and contained a ptid. The read
signal value was therefore garbage, and that caused GDB to crash soon
after. Or, since that GDB was built with ubsan, this nice error
message:
/home/simark/src/binutils-gdb/gdb/linux-nat.c:1271:12: runtime error: load of value 2686365, which is not a valid value for type 'gdb_signal'
Despite being a large-ish change, I think it would be nice to make
target_waitstatus safe against that kind of bug. As already done
elsewhere (e.g. dynamic_prop), validate that the type of value read from
the union matches what is supposed to be the active field.
- Make the kind and value of target_waitstatus private.
- Make the kind initialized to TARGET_WAITKIND_IGNORE on
target_waitstatus construction. This is what most users appear to do
explicitly.
- Add setters, one for each kind. Each setter takes as a parameter the
data associated to that kind, if any. This makes it impossible to
forget to attach the associated data.
- Add getters, one for each associated data type. Each getter
validates that the data type fetched by the user matches the wait
status kind.
- Change "integer" to "exit_status", "related_pid" to "child_ptid",
just because that's more precise terminology.
- Fix all users.
That last point is semi-mechanical. There are a lot of obvious changes,
but some less obvious ones. For example, it's not possible to set the
kind at some point and the associated data later, as some users did.
But in any case, the intent of the code should not change in this patch.
This was tested on x86-64 Linux (unix, native-gdbserver and
native-extended-gdbserver boards). It was built-tested on x86-64
FreeBSD, NetBSD, MinGW and macOS. The rest of the changes to native
files was done as a best effort. If I forgot any place to update in
these files, it should be easy to fix (unless the change happens to
reveal an actual bug).
Change-Id: I0ae967df1ff6e28de78abbe3ac9b4b2ff4ad03b7
|
||
|
Simon Marchi
|
e0700ba44c |
gdb: make string-like set show commands use std::string variable
String-like settings (var_string, var_filename, var_optional_filename, var_string_noescape) currently take a pointer to a `char *` storage variable (typically global) that holds the setting's value. I'd like to "mordernize" this by changing them to use an std::string for storage. An obvious reason is that string operations on std::string are often easier to write than with C strings. And they avoid having to do any manual memory management. Another interesting reason is that, with `char *`, nullptr and an empty string often both have the same meaning of "no value". String settings are initially nullptr (unless initialized otherwise). But when doing "set foo" (where `foo` is a string setting), the setting now points to an empty string. For example, solib_search_path is nullptr at startup, but points to an empty string after doing "set solib-search-path". This leads to some code that needs to check for both to check for "no value". Or some code that converts back and forth between NULL and "" when getting or setting the value. I find this very error-prone, because it is very easy to forget one or the other. With std::string, we at least know that the variable is not "NULL". There is only one way of representing an empty string setting, that is with an empty string. I was wondering whether the distinction between NULL and "" would be important for some setting, but it doesn't seem so. If that ever happens, it would be more C++-y and self-descriptive to use optional<string> anyway. Actually, there's one spot where this distinction mattered, it's in init_history, for the test gdb.base/gdbinit-history.exp. init_history sets the history filename to the default ".gdb_history" if it sees that the setting was never set - if history_filename is nullptr. If history_filename is an empty string, it means the setting was explicitly cleared, so it leaves it as-is. With the change to std::string, this distinction doesn't exist anymore. This can be fixed by moving the code that chooses a good default value for history_filename to _initialize_top. This is ran before -ex commands are processed, so an -ex command can then clear that value if needed (what gdb.base/gdbinit-history.exp tests). Another small improvement, in my opinion is that we can now easily give string parameters initial values, by simply initializing the global variables, instead of xstrdup-ing it in the _initialize function. In Python and Guile, when registering a string-like parameter, we allocate (with new) an std::string that is owned by the param_smob (in Guile) and the parmpy_object (in Python) objects. This patch started by changing all relevant add_setshow_* commands to take an `std::string *` instead of a `char **` and fixing everything that failed to build. That includes of course all string setting variable and their uses. string_option_def now uses an std::string also, because there's a connection between options and settings (see add_setshow_cmds_for_options). The add_path function in source.c is really complex and twisted, I'd rather not try to change it to work on an std::string right now. Instead, I added an overload that copies the std:string to a `char *` and back. This means more copying, but this is not used in a hot path at all, so I think it is acceptable. Change-Id: I92c50a1bdd8307141cdbacb388248e4e4fc08c93 Co-authored-by: Lancelot SIX <lsix@lancelotsix.com> |
||
Andrew Burgess
|
351031f22a |
gdb: make thread_suspend_state::stop_pc optional
Currently the stop_pc field of thread_suspect_state is a CORE_ADDR and when we want to indicate that there is no stop_pc available we set this field back to a special value. There are actually two special values used, in post_create_inferior the stop_pc is set to 0. This is a little unfortunate, there are plenty of embedded targets where 0 is a valid pc value. The more common special value for stop_pc though, is set in thread_info::set_executing, where the value (~(CORE_ADDR) 0) is used. This commit changes things so that the stop_pc is instead a gdb::optional. We can now explicitly reset the field to an uninitialised state, we also have asserts that we don't read the stop_pc when its in an uninitialised state (both in gdbsupport/gdb_optional.h, when compiling with _GLIBCXX_DEBUG defined, and in thread_info::stop_pc). One situation where a thread will not have a stop_pc value is when the thread is stopped as a consequence of GDB being in all stop mode, and some other thread stopped at an interesting event. When GDB brings all the other threads to a stop those other threads will not have a stop_pc set (thus avoiding an unnecessary read of the pc register). Previously, when GDB passed through handle_one (in infrun.c) the threads executing flag was set to false and the stop_pc field was left unchanged, i.e. it would (previous) have been left as ~0. Now, handle_one leaves the stop_pc with no value. This caused a problem when we later try to set these threads running again, in proceed() we compare the current pc with the cached stop_pc. If the thread was stopped via handle_one then the stop_pc would have been left as ~0, and the compare (in proceed) would (likely) fail. Now however, this compare tries to read the stop_pc when it has no value and this would trigger an assert. To resolve this I've added thread_info::stop_pc_p() which returns true if the thread has a cached stop_pc. We should only ever call thread_info::stop_pc() if we know that there is a cached stop_pc, however, this doesn't mean that every call to thread_info::stop_pc() needs to be guarded with a call to thread_info::stop_pc_p(), in most cases we know that the thread we are looking at stopped due to some interesting event in that thread, and so, we know that the stop_pc is valid. After running the testsuite I've seen no other situations where stop_pc is read uninitialised. There should be no user visible changes after this commit. |
||
|
Andrew Burgess
|
611841bb1a |
gdb: make thread_info::executing private
Rename thread_info::executing to thread_info::m_executing, and make it private. Add a new get/set member functions, and convert GDB to make use of these. The only real change of interest in this patch is in thread.c where I have deleted the helper function set_executing_thread, and now just use the new set function thread_info::set_executing. However, the old helper function set_executing_thread included some code to reset the thread's stop_pc, so I moved this code into the new function thread_info::set_executing. However, I don't believe there is anywhere that this results in a change of behaviour, previously the executing flag was always set true through a call to set_executing_thread anyway. |
||
|
Simon Marchi
|
4e93ea6e67 |
gdb: make inferior::m_terminal an std::string
Same idea as the previous patch, but for m_terminal. Change-Id: If9367d5db8c976a4336680adca4ea5bc31ab64d2 |
||
|
Simon Marchi
|
11bd012ed2 |
gdb: make inferior::m_cwd an std::string
Same idea as the previous patch, but for m_cwd. To keep things consistent across the board, change get_inferior_cwd as well, which is shared with GDBserver. So update the related GDBserver code too. Change-Id: Ia2c047fda738d45f3d18bc999eb67ceb8400ce4e |
||
|
Simon Marchi
|
fd2dec2a45 |
gdb: make inferior::m_args an std::string
With the current code, both a NULL pointer and an empty string can mean "no arguments". We don't need this distinction. Changing to a string has the advantage that there is now a single state for that (an empty string), which makes the code a bit simpler in my opinion. Change-Id: Icdc622820f7869478791dbaa84b4a1c7fec21ced |
||
|
Simon Marchi
|
90cc31c9e5 |
gdb: add setter/getter for inferior cwd
Add cwd/set_cwd to the inferior class, remove set_inferior_args. Keep get_inferior_args, because it is used from fork_inferior, in shared code. The cwd could eventually be passed as a parameter eventually, though, I think that would be cleaner. Change-Id: Ifb72ea865d7e6f9a491308f0d5c1595579d8427e |
||
|
Simon Marchi
|
e51695253e |
gdb: add setter/getter for inferior arguments
Add args/set_args to the inferior class, remove the set_inferior_args and get_inferior_args functions, that would just be wrappers around them. Change-Id: If87d52f3402ce08be26c32897ae8915d9f6d1ea3 |
||
|
Simon Marchi
|
a69e37dc2b |
gdb: remove inferior::{argc,argv}
There are currently two states that the inferior args can be stored. The main one is the `args` field, where they are stored as a single string. The other one is the `argc`/`argv` fields. This last one is only used for arguments passed in GDB's command line. And the only outcome is that when get_inferior_args is called, `argc`/`argv` are serialized into `args`. So really, `argc`/`argv` is just a staging area before moving the arguments in `args`. Simplify this by only keeping the `args` field. Change set_inferior_args_vector to immediately serialize the arguments into `args`, work that would be done in get_inferior_args later anyway. The only time where this work would be "wasted" is when the user passes some arguments on the command line, but does not end up running the program. But that just seems unlikely. And it's not that much work. Change-Id: Ica0b9859397c095f6530350c8fb3c36905f2044a |
||
|
Simon Marchi
|
5b8bf2e75e |
gdb: un-share set_inferior_cwd declaration
The declaration of set_inferior_cwd is currently shared between gdb and gdbserver, in gdbsupport/common-inferior.h. It doesn't need to be, as set_inferior_cwd is not called from common code. Only get_inferior_cwd needs to. The motivation for this is that a future patch will change the prototype of set_inferior_cwd in gdb, and I don't want to change it for gdbserver unnecessarily. I see this as a good cleanup in any case, to reduce to just the essential what is shared between GDB and GDBserver. Change-Id: I3127d27d078f0503ebf5ccc6fddf14f212426a73 |
||
|
Simon Marchi
|
1edb66d856 |
gdb: make thread_info::suspend private, add getters / setters
A following patch will want to take some action when a pending wait
status is set on or removed from a thread. Add a getter and a setter on
thread_info for the pending waitstatus, so that we can add some code in
the setter later.
The thing is, the pending wait status field is in the
thread_suspend_state, along with other fields that we need to backup
before and restore after the thread does an inferior function call.
Therefore, make the thread_suspend_state member private
(thread_info::suspend becomes thread_info::m_suspend), and add getters /
setters for all of its fields:
- pending wait status
- stop signal
- stop reason
- stop pc
For the pending wait status, add the additional has_pending_waitstatus
and clear_pending_waitstatus methods.
I think this makes the thread_info interface a bit nicer, because we
now access the fields as:
thread->stop_pc ()
rather than
thread->suspend.stop_pc
The stop_pc field being in the `suspend` structure is an implementation
detail of thread_info that callers don't need to be aware of.
For the backup / restore of the thread_suspend_state structure, add
save_suspend_to and restore_suspend_from methods. You might wonder why
`save_suspend_to`, as opposed to a simple getter like
thread_suspend_state &suspend ();
I want to make it clear that this is to be used only for backing up and
restoring the suspend state, _not_ to access fields like:
thread->suspend ()->stop_pc
Adding some getters / setters allows adding some assertions. I find
that this helps understand how things are supposed to work. Add:
- When getting the pending status (pending_waitstatus method), ensure
that there is a pending status.
- When setting a pending status (set_pending_waitstatus method), ensure
there is no pending status.
There is one case I found where this wasn't true - in
remote_target::process_initial_stop_replies - which needed adjustments
to respect that contract. I think it's because
process_initial_stop_replies is kind of (ab)using the
thread_info::suspend::waitstatus to store some statuses temporarily, for
its internal use (statuses it doesn't intent on leaving pending).
process_initial_stop_replies pulls out stop replies received during the
initial connection using target_wait. It always stores the received
event in `evthread->suspend.waitstatus`. But it only sets
waitstatus_pending_p, if it deems the event interesting enough to leave
pending, to be reported to the core:
if (ws.kind != TARGET_WAITKIND_STOPPED
|| ws.value.sig != GDB_SIGNAL_0)
evthread->suspend.waitstatus_pending_p = 1;
It later uses this flag a bit below, to choose which thread to make the
"selected" one:
if (selected == NULL
&& thread->suspend.waitstatus_pending_p)
selected = thread;
And ultimately that's used if the user-visible mode is all-stop, so that
we print the stop for that interesting thread:
/* In all-stop, we only print the status of one thread, and leave
others with their status pending. */
if (!non_stop)
{
thread_info *thread = selected;
if (thread == NULL)
thread = lowest_stopped;
if (thread == NULL)
thread = first;
print_one_stopped_thread (thread);
}
But in any case (all-stop or non-stop), print_one_stopped_thread needs
to access the waitstatus value of these threads that don't have a
pending waitstatus (those that had TARGET_WAITKIND_STOPPED +
GDB_SIGNAL_0). This doesn't work with the assertions I've
put.
So, change the code to only set the thread's wait status if it is an
interesting one that we are going to leave pending. If the thread
stopped due to a non-interesting event (TARGET_WAITKIND_STOPPED +
GDB_SIGNAL_0), don't store it. Adjust print_one_stopped_thread to
understand that if a thread has no pending waitstatus, it's because it
stopped with TARGET_WAITKIND_STOPPED + GDB_SIGNAL_0.
The call to set_last_target_status also uses the pending waitstatus.
However, given that the pending waitstatus for the thread may have been
cleared in print_one_stopped_thread (and that there might not even be a
pending waitstatus in the first place, as explained above), it is no
longer possible to do it at this point. To fix that, move the call to
set_last_target_status in print_one_stopped_thread. I think this will
preserve the existing behavior, because set_last_target_status is
currently using the current thread's wait status. And the current
thread is the last one for which print_one_stopped_thread is called. So
by calling set_last_target_status in print_one_stopped_thread, we'll get
the same result. set_last_target_status will possibly be called
multiple times, but only the last call will matter. It just means
possibly more calls to set_last_target_status, but those are cheap.
Change-Id: Iedab9653238eaf8231abcf0baa20145acc8b77a7
|
||
|
Simon Marchi
|
122373f7f2 |
gdb: try to load libthread_db only after reading all shared libraries when attaching / handling a fork child
When trying to attach to a pthread process on a Linux system with glibc 2.33,
we get:
$ ./gdb -q -nx --data-directory=data-directory -p 1472010
Attaching to process 1472010
[New LWP 1472013]
[New LWP 1472014]
[New LWP 1472015]
Error while reading shared library symbols for /usr/lib/libpthread.so.0:
Cannot find user-level thread for LWP 1472015: generic error
0x00007ffff6d3637f in poll () from /usr/lib/libc.so.6
(gdb)
When attaching to a process (or handling a fork child, an operation very
similar to attaching), GDB reads the shared library list from the
process. For each shared library (if "set auto-solib-add" is on), it
reads its symbols and calls the "new_objfile" observable.
The libthread-db code monitors this observable, and if it sees an
objfile named somewhat like "libpthread.so" go by, it tries to load
libthread_db.so in the GDB process itself. libthread_db knows how to
navigate libpthread's data structures to get information about the
existing threads.
To locate these data structures, libthread_db calls ps_pglobal_lookup
(implemented in proc-service.c), passing in a symbol name and expecting
an address in return.
Before glibc 2.33, libthread_db always asked for symbols found in
libpthread. There was no ordering problem: since we were always trying
to load libthread_db in reaction to processing libpthread (and reading
in its symbols) and libthread_db only asked symbols from libpthread, the
requested symbols could always be found. Starting with glibc 2.33,
libthread_db now asks for a symbol name that can be found in
/lib/ld-linux-x86-64.so.2 (_rtld_global). And the ordering in which GDB
reads the shared libraries from the inferior when attaching is
unfortunate, in that libpthread is processed before ld-linux. So when
loading libthread_db in reaction to processing libpthread, and
libthread_db requests the symbol that is from ld-linux, GDB is not yet
able to supply it.
That problematic symbol lookup happens in the thread_from_lwp function,
when we call td_ta_map_lwp2thr_p, and an exception is thrown at this
point:
#0 0x00007ffff6681012 in __cxxabiv1::__cxa_throw (obj=0x60e000006100, tinfo=0x555560033b50 <typeinfo for gdb_exception_error>, dest=0x55555d9404bc <gdb_exception_error::~gdb_exception_error()>) at /build/gcc/src/gcc/libstdc++-v3/libsupc++/eh_throw.cc:78
#1 0x000055555e5d3734 in throw_it(return_reason, errors, const char *, typedef __va_list_tag __va_list_tag *) (reason=RETURN_ERROR, error=GENERIC_ERROR, fmt=0x55555f0c5360 "Cannot find user-level thread for LWP %ld: %s", ap=0x7fffffffaae0) at /home/simark/src/binutils-gdb/gdbsupport/common-exceptions.cc:200
#2 0x000055555e5d37d4 in throw_verror (error=GENERIC_ERROR, fmt=0x55555f0c5360 "Cannot find user-level thread for LWP %ld: %s", ap=0x7fffffffaae0) at /home/simark/src/binutils-gdb/gdbsupport/common-exceptions.cc:208
#3 0x000055555e0b0ed2 in verror (string=0x55555f0c5360 "Cannot find user-level thread for LWP %ld: %s", args=0x7fffffffaae0) at /home/simark/src/binutils-gdb/gdb/utils.c:171
#4 0x000055555e5e898a in error (fmt=0x55555f0c5360 "Cannot find user-level thread for LWP %ld: %s") at /home/simark/src/binutils-gdb/gdbsupport/errors.cc:43
#5 0x000055555d06b4bc in thread_from_lwp (stopped=0x617000035d80, ptid=...) at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:418
#6 0x000055555d07040d in try_thread_db_load_1 (info=0x60c000011140) at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:912
#7 0x000055555d071103 in try_thread_db_load (library=0x55555f0c62a0 "libthread_db.so.1", check_auto_load_safe=false) at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:1014
#8 0x000055555d072168 in try_thread_db_load_from_sdir () at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:1091
#9 0x000055555d072d1c in thread_db_load_search () at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:1146
#10 0x000055555d07365c in thread_db_load () at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:1203
#11 0x000055555d07373e in check_for_thread_db () at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:1246
#12 0x000055555d0738ab in thread_db_new_objfile (objfile=0x61300000c0c0) at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:1275
#13 0x000055555bd10740 in std::__invoke_impl<void, void (*&)(objfile*), objfile*> (__f=@0x616000068d88: 0x55555d073745 <thread_db_new_objfile(objfile*)>) at /usr/include/c++/10.2.0/bits/invoke.h:60
#14 0x000055555bd02096 in std::__invoke_r<void, void (*&)(objfile*), objfile*> (__fn=@0x616000068d88: 0x55555d073745 <thread_db_new_objfile(objfile*)>) at /usr/include/c++/10.2.0/bits/invoke.h:153
#15 0x000055555bce0392 in std::_Function_handler<void (objfile*), void (*)(objfile*)>::_M_invoke(std::_Any_data const&, objfile*&&) (__functor=..., __args#0=@0x7fffffffb4a0: 0x61300000c0c0) at /usr/include/c++/10.2.0/bits/std_function.h:291
#16 0x000055555d3595c0 in std::function<void (objfile*)>::operator()(objfile*) const (this=0x616000068d88, __args#0=0x61300000c0c0) at /usr/include/c++/10.2.0/bits/std_function.h:622
#17 0x000055555d356b7f in gdb::observers::observable<objfile*>::notify (this=0x555566727020 <gdb::observers::new_objfile>, args#0=0x61300000c0c0) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/observable.h:106
#18 0x000055555da3f228 in symbol_file_add_with_addrs (abfd=0x61200001ccc0, name=0x6190000d9090 "/usr/lib/libpthread.so.0", add_flags=..., addrs=0x7fffffffbc10, flags=..., parent=0x0) at /home/simark/src/binutils-gdb/gdb/symfile.c:1131
#19 0x000055555da3f763 in symbol_file_add_from_bfd (abfd=0x61200001ccc0, name=0x6190000d9090 "/usr/lib/libpthread.so.0", add_flags=<error reading variable: Cannot access memory at address 0xffffffffffffffb0>, addrs=0x7fffffffbc10, flags=<error reading variable: Cannot access memory at address 0xffffffffffffffc0>, parent=0x0) at /home/simark/src/binutils-gdb/gdb/symfile.c:1167
#20 0x000055555d95f9fa in solib_read_symbols (so=0x6190000d8e80, flags=...) at /home/simark/src/binutils-gdb/gdb/solib.c:681
#21 0x000055555d96233d in solib_add (pattern=0x0, from_tty=0, readsyms=1) at /home/simark/src/binutils-gdb/gdb/solib.c:987
#22 0x000055555d93646e in enable_break (info=0x608000008f20, from_tty=0) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2238
#23 0x000055555d93cfc0 in svr4_solib_create_inferior_hook (from_tty=0) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:3049
#24 0x000055555d96610d in solib_create_inferior_hook (from_tty=0) at /home/simark/src/binutils-gdb/gdb/solib.c:1195
#25 0x000055555cdee318 in post_create_inferior (from_tty=0) at /home/simark/src/binutils-gdb/gdb/infcmd.c:318
#26 0x000055555ce00e6e in setup_inferior (from_tty=0) at /home/simark/src/binutils-gdb/gdb/infcmd.c:2439
#27 0x000055555ce59c34 in handle_one (event=...) at /home/simark/src/binutils-gdb/gdb/infrun.c:4887
#28 0x000055555ce5cd00 in stop_all_threads () at /home/simark/src/binutils-gdb/gdb/infrun.c:5064
#29 0x000055555ce7f0da in stop_waiting (ecs=0x7fffffffd170) at /home/simark/src/binutils-gdb/gdb/infrun.c:8006
#30 0x000055555ce67f5c in handle_signal_stop (ecs=0x7fffffffd170) at /home/simark/src/binutils-gdb/gdb/infrun.c:6062
#31 0x000055555ce63653 in handle_inferior_event (ecs=0x7fffffffd170) at /home/simark/src/binutils-gdb/gdb/infrun.c:5727
#32 0x000055555ce4f297 in fetch_inferior_event () at /home/simark/src/binutils-gdb/gdb/infrun.c:4105
#33 0x000055555cdbe3bf in inferior_event_handler (event_type=INF_REG_EVENT) at /home/simark/src/binutils-gdb/gdb/inf-loop.c:42
#34 0x000055555d018047 in handle_target_event (error=0, client_data=0x0) at /home/simark/src/binutils-gdb/gdb/linux-nat.c:4060
#35 0x000055555e5ea77e in handle_file_event (file_ptr=0x60600008b1c0, ready_mask=1) at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:575
#36 0x000055555e5eb09c in gdb_wait_for_event (block=0) at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:701
#37 0x000055555e5e8d19 in gdb_do_one_event () at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:212
#38 0x000055555dd6e0d4 in wait_sync_command_done () at /home/simark/src/binutils-gdb/gdb/top.c:528
#39 0x000055555dd6e372 in maybe_wait_sync_command_done (was_sync=0) at /home/simark/src/binutils-gdb/gdb/top.c:545
#40 0x000055555d0ec7c8 in catch_command_errors (command=0x55555ce01bb8 <attach_command(char const*, int)>, arg=0x7fffffffe28d "1472010", from_tty=1, do_bp_actions=false) at /home/simark/src/binutils-gdb/gdb/main.c:452
#41 0x000055555d0f03ad in captured_main_1 (context=0x7fffffffdd10) at /home/simark/src/binutils-gdb/gdb/main.c:1149
#42 0x000055555d0f1239 in captured_main (data=0x7fffffffdd10) at /home/simark/src/binutils-gdb/gdb/main.c:1232
#43 0x000055555d0f1315 in gdb_main (args=0x7fffffffdd10) at /home/simark/src/binutils-gdb/gdb/main.c:1257
#44 0x000055555bb70cf9 in main (argc=7, argv=0x7fffffffde88) at /home/simark/src/binutils-gdb/gdb/gdb.c:32
The exception is caught here:
#0 __cxxabiv1::__cxa_begin_catch (exc_obj_in=0x60e0000060e0) at /build/gcc/src/gcc/libstdc++-v3/libsupc++/eh_catch.cc:84
#1 0x000055555d95fded in solib_read_symbols (so=0x6190000d8e80, flags=...) at /home/simark/src/binutils-gdb/gdb/solib.c:689
#2 0x000055555d96233d in solib_add (pattern=0x0, from_tty=0, readsyms=1) at /home/simark/src/binutils-gdb/gdb/solib.c:987
#3 0x000055555d93646e in enable_break (info=0x608000008f20, from_tty=0) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2238
#4 0x000055555d93cfc0 in svr4_solib_create_inferior_hook (from_tty=0) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:3049
#5 0x000055555d96610d in solib_create_inferior_hook (from_tty=0) at /home/simark/src/binutils-gdb/gdb/solib.c:1195
#6 0x000055555cdee318 in post_create_inferior (from_tty=0) at /home/simark/src/binutils-gdb/gdb/infcmd.c:318
#7 0x000055555ce00e6e in setup_inferior (from_tty=0) at /home/simark/src/binutils-gdb/gdb/infcmd.c:2439
#8 0x000055555ce59c34 in handle_one (event=...) at /home/simark/src/binutils-gdb/gdb/infrun.c:4887
#9 0x000055555ce5cd00 in stop_all_threads () at /home/simark/src/binutils-gdb/gdb/infrun.c:5064
#10 0x000055555ce7f0da in stop_waiting (ecs=0x7fffffffd170) at /home/simark/src/binutils-gdb/gdb/infrun.c:8006
#11 0x000055555ce67f5c in handle_signal_stop (ecs=0x7fffffffd170) at /home/simark/src/binutils-gdb/gdb/infrun.c:6062
#12 0x000055555ce63653 in handle_inferior_event (ecs=0x7fffffffd170) at /home/simark/src/binutils-gdb/gdb/infrun.c:5727
#13 0x000055555ce4f297 in fetch_inferior_event () at /home/simark/src/binutils-gdb/gdb/infrun.c:4105
#14 0x000055555cdbe3bf in inferior_event_handler (event_type=INF_REG_EVENT) at /home/simark/src/binutils-gdb/gdb/inf-loop.c:42
#15 0x000055555d018047 in handle_target_event (error=0, client_data=0x0) at /home/simark/src/binutils-gdb/gdb/linux-nat.c:4060
#16 0x000055555e5ea77e in handle_file_event (file_ptr=0x60600008b1c0, ready_mask=1) at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:575
#17 0x000055555e5eb09c in gdb_wait_for_event (block=0) at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:701
#18 0x000055555e5e8d19 in gdb_do_one_event () at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:212
#19 0x000055555dd6e0d4 in wait_sync_command_done () at /home/simark/src/binutils-gdb/gdb/top.c:528
#20 0x000055555dd6e372 in maybe_wait_sync_command_done (was_sync=0) at /home/simark/src/binutils-gdb/gdb/top.c:545
#21 0x000055555d0ec7c8 in catch_command_errors (command=0x55555ce01bb8 <attach_command(char const*, int)>, arg=0x7fffffffe28d "1472010", from_tty=1, do_bp_actions=false) at /home/simark/src/binutils-gdb/gdb/main.c:452
#22 0x000055555d0f03ad in captured_main_1 (context=0x7fffffffdd10) at /home/simark/src/binutils-gdb/gdb/main.c:1149
#23 0x000055555d0f1239 in captured_main (data=0x7fffffffdd10) at /home/simark/src/binutils-gdb/gdb/main.c:1232
#24 0x000055555d0f1315 in gdb_main (args=0x7fffffffdd10) at /home/simark/src/binutils-gdb/gdb/main.c:1257
#25 0x000055555bb70cf9 in main (argc=7, argv=0x7fffffffde88) at /home/simark/src/binutils-gdb/gdb/gdb.c:32
Catching the exception at this point means that the thread_db_info
object for this inferior will be left in place, despite the failure to
load libthread_db. This means that there won't be further attempts at
loading libthread_db, because thread_db_load will think that
libthread_db is already loaded for this inferior and will always exit
early. To fix this, add a try/catch around calling try_thread_db_load_1
in try_thread_db_load, such that if some exception is thrown while
trying to load libthread_db, we reset / delete the thread_db_info for
that inferior. That alone makes attach work fine again, because
check_for_thread_db is called again in the thread_db_inferior_created
observer (that happens after we learned about all shared libraries and
their symbols), and libthread_db is successfully loaded then.
When attaching, I think that the inferior_created observer is a good
place to try to load libthread_db: it is called once everything has
stabilized, when we learned about all shared libraries.
The only problem then is that when we first try (and fail) to load
libthread_db, in reaction to learning about libpthread, we show this
warning:
warning: Unable to find libthread_db matching inferior's thread library, thread debugging will not be available.
This is misleading, because we do succeed in loading it later. So when
attaching, I think we shouldn't try to load libthread_db in reaction to
the new_objfile events, we should wait until we have learned about all
shared libraries (using the inferior_created observable). To do so, add
an `in_initial_library_scan` flag to struct inferior. This flag is used
to postpone loading libthread_db if we are attaching or handling a fork
child.
When debugging remotely with GDBserver, the same problem happens, except
that the qSymbol mechanism (allowing the remote side to ask GDB for
symbols values) is involved. The fix there is the same idea, we make
GDB wait until all shared libraries and their symbols are known before
sending out a qSymbol packet. This way, we never present the remote
side a state where libpthread.so's symbols are known but ld-linux's
symbols aren't.
gdb/ChangeLog:
* inferior.h (class inferior) <in_initial_library_scan>: New.
* infcmd.c (post_create_inferior): Set in_initial_library_scan.
* infrun.c (follow_fork_inferior): Likewise.
* linux-thread-db.c (try_thread_db_load): Catch exception thrown
by try_thread_db_load_1
(thread_db_load): Return early if in_initial_library_scan is
set.
* remote.c (remote_new_objfile): Return early if
in_initial_library_scan is set.
Change-Id: I7a279836cfbb2b362b4fde11b196b4aab82f5efb
|
||
|
Simon Marchi
|
24b21115f5 |
gdb: fix tab after space indentation issues
I spotted some indentation issues where we had some spaces followed by tabs at beginning of line, that I wanted to fix. So while at it, I did a quick grep to find and fix all I could find. gdb/ChangeLog: * Fix tab after space indentation issues throughout. Change-Id: I1acb414dd9c593b474ae2b8667496584df4316fd |
||
|
Simon Marchi
|
e0f25bd971 |
gdb: make add_info_alias accept target as a cmd_list_element
Same idea as previous patch, but for add_info_alias. gdb/ChangeLog: * command.h (add_info_alias): Accept target as cmd_list_element. Update callers. Change-Id: If830d423364bf42d7bea5ac4dd3a81adcfce6f7a |
||
|
Simon Marchi
|
3947f654ea |
gdb: make add_com_alias accept target as a cmd_list_element
The alias creation functions currently accept a name to specify the target command. They pass this to add_alias_cmd, which needs to lookup the target command by name. Given that: - We don't support creating an alias for a command before that command exists. - We always use add_info_alias just after creating that target command, and therefore have access to the target command's cmd_list_element. ... change add_com_alias to accept the target command as a cmd_list_element (other functions are done in subsequent patches). This ensures we don't create the alias before the target command, because you need to get the cmd_list_element from somewhere when you call the alias creation function. And it avoids an unecessary command lookup. So it seems better to me in every aspect. gdb/ChangeLog: * command.h (add_com_alias): Accept target as cmd_list_element. Update callers. Change-Id: I24bed7da57221cc77606034de3023fedac015150 |
||
Marco Barisione
|
8dd8c8d4ab |
gdb: Pass std::strings to ui_out::field_string () where convenient
While adding a ui_out::text () overload accepting a std::string, I noticed that several callers of ui_out::field_string () were converting std::string instances to char pointers even if not necessary. gdb/ChangeLog: * ui-out.c (ui_out::field_string): Add missing style_argument to the overload accepting a std::string, to make it equivalent to the char pointer version. * ui-out.h (class ui_out): Ditto. * break-catch-sig.c (signal_catchpoint_print_one): Do not convert std::strings to char pointers before passing them to ui_out::field_string (). * break-catch-throw.c (print_one_detail_exception_catchpoint): Ditto. * cli/cli-setshow.c (do_show_command): Ditto. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Ditto. * infcmd.c (print_return_value_1): Ditto. * inferior.c (print_inferior): Ditto. * linux-thread-db.c (info_auto_load_libthread_db): Ditto. * mi/mi-cmd-var.c (print_varobj): Ditto. (mi_cmd_var_set_format): Ditto. (mi_cmd_var_info_type): Ditto. (mi_cmd_var_info_expression): Ditto. (mi_cmd_var_evaluate_expression): Ditto. (mi_cmd_var_assign): Ditto. (varobj_update_one): Ditto. * mi/mi-main.c (list_available_thread_groups): Ditto. (mi_cmd_data_read_memory_bytes): Ditto. (mi_cmd_trace_frame_collected): Ditto. * osdata.c (info_osdata): Ditto. * probe.c (info_probes_for_spops): Ditto. * target-connection.c (print_connection): Ditto. * thread.c (print_thread_info_1): Ditto. * tracepoint.c (print_one_static_tracepoint_marker): Ditto. |
||
|
Marco Barisione
|
2f822da535 |
gdb: generate the prefix name for prefix commands on demand
Previously, the prefixname field of struct cmd_list_element was manually
set for prefix commands. This seems verbose and error prone as it
required every single call to functions adding prefix commands to
specify the prefix name while the same information can be easily
generated.
Historically, this was not possible as the prefix field was null for
many commands, but this was fixed in commit
|
||
|
Andrew Burgess
|
8a82de5884 |
gdb: some int to bool conversion
Change int parameter to bool in remote_notice_new_inferior (remote.c) and notice_new_inferior (infcmd.c), and update the callers. There should be no user visible changes after this commit. gdb/ChangeLog: * infcmd.c (notice_new_inferior): Change parameter type. * inferior.h (notice_new_inferior): Change parameter type. * remote.c (remote_notice_new_inferior): Change parameter type to bool. Also update type of local variable to bool. (remote_target::update_thread_list): Change type of local variable to bool. (remote_target::process_stop_reply): Pass bool instead of int to remote_notice_new_inferior. |
||
|
Simon Marchi
|
ec66d6ea54 |
gdb: make inferior::args a unique_xmalloc_ptr
Use unique_xmalloc_ptr to avoid manual memory management. gdb/ChangeLog: * inferior.h (class inferior) <args>: Change type to unique_xmalloc_ptr. * inferior.c (inferior::~inferior): Don't free args. * infcmd.c (get_inferior_args): Adjust. (set_inferior_args): Adjust. Change-Id: I96300e59eb2faf2d80660416a8f5694d243a944e |
||
Tankut Baris Aktemur
|
4efeb0d3e8 |
gdb/continuations: turn continuation functions into inferior methods
Turn continuations-related functions into methods of the inferior class. This is a refactoring. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * Makefile.in (COMMON_SFILES): Remove continuations.c. * inferior.c (inferior::add_continuation): New method, adapted from 'add_inferior_continuation'. (inferior::do_all_continuations): New method, adapted from 'do_all_inferior_continuations'. (inferior::~inferior): Clear the list of continuations directly. * inferior.h (class inferior) <continuations>: Rename into... <m_continuations>: ...this and make private. * continuations.c: Remove. * continuations.h: Remove. * event-top.c: Don't include "continuations.h". Update the users below. * inf-loop.c (inferior_event_handler) * infcmd.c (attach_command) (notice_new_inferior): Update. |
||
|
Tankut Baris Aktemur
|
c4c493de2b |
gdb/continuations: use lambdas instead of function pointers
Use lambdas and std::list to track inferior continuations. This is a refactoring. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * inferior.h (class inferior) <continuations>: Change the type to be an std::list of std::function's. Update the references and uses below. * continuations.c (struct continuation): Delete. (make_continuation): Delete. (do_my_continuations_1): Delete. (do_my_continuations): Delete. (discard_my_continuations_1): Delete. (discard_my_continuations): Delete. (add_inferior_continuation): Update. (do_all_inferior_continuations): Update. (discard_all_inferior_continuations): Update. * continuations.h (add_inferior_continuation): Update to take an std::function as the parameter. * infcmd.c (struct attach_command_continuation_args): Delete. (attach_command_continuation): Delete. (attach_command_continuation_free_args): Delete. (attach_command): Update. (notice_new_inferior): Update. |
||
|
Tankut Baris Aktemur
|
35682f0a64 |
gdb/continuations: remove the 'err' from 'do_all_inferior_continuations'
The 'err' parameter of 'do_all_inferior_continuations' is effectively unused. There is only one place where the function is called, and there the argument is a literal 0. So, remove the parameter. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * continuations.h (do_all_inferior_continuations): Remove the 'err' parameter. Update the references below. * continuations.c (do_my_continuations_1) (do_my_continuations) (do_all_inferior_continuations): Update. * inf-loop.c (inferior_event_handler): Update. * infcmd.c (attach_command_continuation): Update. |
||
|
Tankut Baris Aktemur
|
6fee5eee88 |
gdb/infcmd: update the comment for 'attach_post_wait'
gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * infcmd.c (attach_post_wait): Update the function comment. |
||
|
Tankut Baris Aktemur
|
27d0790a58 |
gdb/infcmd: remove the unused parameter 'args' in 'attach_post_wait'
The 'arg' parameter of 'attach_post_wait' is unused. Remove it. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * infcmd.c (attach_post_wait): Remove the unused parameter 'args'. Update the references below. (struct attach_command_continuation_args) (attach_command_continuation) (attach_command_continuation_free_args) (attach_command) (notice_new_inferior): Update to remove the reference to 'args'. |
||
|
Tom de Vries
|
340d00fb78 |
[gdb/breakpoints] Workaround missing line-table entry
When running test-case gdb.opt/inline-cmds.exp, we run into this KFAIL with
gcc:
...
Breakpoint 7, main () at gdb.opt/inline-cmds.c:71^M
71 result = 0; /* set breakpoint 3 here */^M
(gdb) PASS: gdb.opt/inline-cmds.exp: continue to breakpoint: consecutive func1
next^M
73 func1 (); /* first call */^M
(gdb) PASS: gdb.opt/inline-cmds.exp: next to first func1
next^M
75 marker ();^M
(gdb) KFAIL: gdb.opt/inline-cmds.exp: next to second func1 (PRMS: gdb/25884)
...
while with clang we have instead:
...
next^M
74 func1 (); /* second call */^M
(gdb) PASS: gdb.opt/inline-cmds.exp: next to second func1
...
The relevant bit of the test source is here in inline-cmds.c:
...
71 result = 0; /* set breakpoint 3 here */
72
73 func1 (); /* first call */
74 func1 (); /* second call */
75 marker ();
...
with func1 defined as:
...
33 inline __attribute__((always_inline)) int func1(void)
34 {
35 bar ();
36 return x * y;
37 }
...
The corresponding insns are:
...
40050b: movl $0x0,0x200b1f(%rip) # 601034 <result>
400515: callq 40057b <bar>
40051a: callq 40057b <bar>
40051f: callq 400596 <marker>
...
and the line number info is:
...
Line number Starting address View Stmt
71 0x40050b x
35 0x400515 x
75 0x40051f x
...
The line number info is missing an entry for the insn at 40051a, and that is
causing the FAIL. This is a gcc issue, filed as PR gcc/98780 -" Missing line
table entry for inlined stmt at -g -O0".
[ For contrast, with clang we have an extra entry:
...
Line number Starting address View Stmt
71 0x40050b x
35 0x400515 x
35 0x40051a
75 0x40051f x
...
though it appears to be missing the start-of-statement marker. ]
However, there is debug info that indicates that the insn at 40051a is not
part of the line table entry for the insn at 400515:
...
<2><1c4>: Abbrev Number: 8 (DW_TAG_inlined_subroutine)
<1c5> DW_AT_abstract_origin: <0x2a2>
<1c9> DW_AT_low_pc : 0x400515
<1d1> DW_AT_high_pc : 0x5
<1d9> DW_AT_call_file : 1
<1da> DW_AT_call_line : 73
<2><1db>: Abbrev Number: 8 (DW_TAG_inlined_subroutine)
<1dc> DW_AT_abstract_origin: <0x2a2>
<1e0> DW_AT_low_pc : 0x40051a
<1e8> DW_AT_high_pc : 0x5
<1f0> DW_AT_call_file : 1
<1f1> DW_AT_call_line : 74
...
and indeed lldb manages to "next" from line 73 to line 74.
Work around the missing line table entry, by using the inline frame info to
narrow the stepping range in prepare_one_step.
Tested on x86_64-linux.
gdb/ChangeLog:
2021-04-06 Tom de Vries <tdevries@suse.de>
PR breakpoints/25884
* infcmd.c (prepare_one_step): Using inline frame info to narrow
stepping range.
gdb/testsuite/ChangeLog:
2021-04-06 Tom de Vries <tdevries@suse.de>
PR breakpoints/25884
* gdb.opt/inline-cmds.exp: Remove kfail.
|
||
|
Simon Marchi
|
1192f124a3 |
gdb: generalize commit_resume, avoid commit-resuming when threads have pending statuses
The rationale for this patch comes from the ROCm port [1], the goal
being to reduce the number of back and forths between GDB and the
target when doing successive operations. I'll start with explaining
the rationale and then go over the implementation. In the ROCm / GPU
world, the term "wave" is somewhat equivalent to a "thread" in GDB.
So if you read if from a GPU stand point, just s/thread/wave/.
ROCdbgapi, the library used by GDB [2] to communicate with the GPU
target, gives the illusion that it's possible for the debugger to
control (start and stop) individual threads. But in reality, this is
not how it works. Under the hood, all threads of a queue are
controlled as a group. To stop one thread in a group of running ones,
the state of all threads is retrieved from the GPU, all threads are
destroyed, and all threads but the one we want to stop are re-created
from the saved state. The net result, from the point of view of GDB,
is that the library stopped one thread. The same thing goes if we
want to resume one thread while others are running: the state of all
running threads is retrieved from the GPU, they are all destroyed, and
they are all re-created, including the thread we want to resume.
This leads to some inefficiencies when combined with how GDB works,
here are two examples:
- Stopping all threads: because the target operates in non-stop mode,
when the user interface mode is all-stop, GDB must stop all threads
individually when presenting a stop. Let's suppose we have 1000
threads and the user does ^C. GDB asks the target to stop one
thread. Behind the scenes, the library retrieves 1000 thread
states and restores the 999 others still running ones. GDB asks
the target to stop another one. The target retrieves 999 thread
states and restores the 998 remaining ones. That means that to
stop 1000 threads, we did 1000 back and forths with the GPU. It
would have been much better to just retrieve the states once and
stop there.
- Resuming with pending events: suppose the 1000 threads hit a
breakpoint at the same time. The breakpoint is conditional and
evaluates to true for the first thread, to false for all others.
GDB pulls one event (for the first thread) from the target, decides
that it should present a stop, so stops all threads using
stop_all_threads. All these other threads have a breakpoint event
to report, which is saved in `thread_info::suspend::waitstatus` for
later. When the user does "continue", GDB resumes that one thread
that did hit the breakpoint. It then processes the pending events
one by one as if they just arrived. It picks one, evaluates the
condition to false, and resumes the thread. It picks another one,
evaluates the condition to false, and resumes the thread. And so
on. In between each resumption, there is a full state retrieval
and re-creation. It would be much nicer if we could wait a little
bit before sending those threads on the GPU, until it processed all
those pending events.
To address this kind of performance issue, ROCdbgapi has a concept
called "forward progress required", which is a boolean state that
allows its user (i.e. GDB) to say "I'm doing a bunch of operations,
you can hold off putting the threads on the GPU until I'm done" (the
"forward progress not required" state). Turning forward progress back
on indicates to the library that all threads that are supposed to be
running should now be really running on the GPU.
It turns out that GDB has a similar concept, though not as general,
commit_resume. One difference is that commit_resume is not stateful:
the target can't look up "does the core need me to schedule resumed
threads for execution right now". It is also specifically linked to
the resume method, it is not used in other contexts. The target
accumulates resumption requests through target_ops::resume calls, and
then commits those resumptions when target_ops::commit_resume is
called. The target has no way to check if it's ok to leave resumed
threads stopped in other target methods.
To bridge the gap, this patch generalizes the commit_resume concept in
GDB to match the forward progress concept of ROCdbgapi. The current
name (commit_resume) can be interpreted as "commit the previous resume
calls". I renamed the concept to "commit_resumed", as in "commit the
threads that are resumed".
In the new version, we have two things:
- the commit_resumed_state field in process_stratum_target: indicates
whether GDB requires target stacks using this target to have
resumed threads committed to the execution target/device. If
false, an execution target is allowed to leave resumed threads
un-committed at the end of whatever method it is executing.
- the commit_resumed target method: called when commit_resumed_state
transitions from false to true. While commit_resumed_state was
false, the target may have left some resumed threads un-committed.
This method being called tells it that it should commit them back
to the execution device.
Let's take the "Stopping all threads" scenario from above and see how
it would work with the ROCm target with this change. Before stopping
all threads, GDB would set the target's commit_resumed_state field to
false. It would then ask the target to stop the first thread. The
target would retrieve all threads' state from the GPU and mark that
one as stopped. Since commit_resumed_state is false, it leaves all
the other threads (still resumed) stopped. GDB would then proceed to
call target_stop for all the other threads. Since resumed threads are
not committed, this doesn't do any back and forth with the GPU.
To simplify the implementation of targets, this patch makes it so that
when calling certain target methods, the contract between the core and
the targets guarantees that commit_resumed_state is false. This way,
the target doesn't need two paths, one for commit_resumed_state ==
true and one for commit_resumed_state == false. It can just assert
that commit_resumed_state is false and work with that assumption.
This also helps catch places where we forgot to disable
commit_resumed_state before calling the method, which represents a
probable optimization opportunity. The commit adds assertions in the
target method wrappers (target_resume and friends) to have some
confidence that this contract between the core and the targets is
respected.
The scoped_disable_commit_resumed type is used to disable the commit
resumed state of all process targets on construction, and selectively
re-enable it on destruction (see below for criteria). Note that it
only sets the process_stratum_target::commit_resumed_state flag. A
subsequent call to maybe_call_commit_resumed_all_targets is necessary
to call the commit_resumed method on all target stacks with process
targets that got their commit_resumed_state flag turned back on. This
separation is because we don't want to call the commit_resumed methods
in scoped_disable_commit_resumed's destructor, as they may throw.
On destruction, commit-resumed is not re-enabled for a given target
if:
1. this target has no threads resumed, or
2. this target has at least one resumed thread with a pending status
known to the core (saved in thread_info::suspend::waitstatus).
The first point is not technically necessary, because a proper
commit_resumed implementation would be a no-op if the target has no
resumed threads. But since we have a flag do to a quick check, it
shouldn't hurt.
The second point is more important: together with the
scoped_disable_commit_resumed instance added in fetch_inferior_event,
it makes it so the "Resuming with pending events" described above is
handled efficiently. Here's what happens in that case:
1. The user types "continue".
2. Upon destruction, the scoped_disable_commit_resumed in the
`proceed` function does not enable commit-resumed, as it sees some
threads have pending statuses.
3. fetch_inferior_event is called to handle another event, the
breakpoint hit evaluates to false, and that thread is resumed.
Because there are still more threads with pending statuses, the
destructor of scoped_disable_commit_resumed in
fetch_inferior_event still doesn't enable commit-resumed.
4. Rinse and repeat step 3, until the last pending status is handled
by fetch_inferior_event. In that case,
scoped_disable_commit_resumed's destructor sees there are no more
threads with pending statues, so it asks the target to commit
resumed threads.
This allows us to avoid all unnecessary back and forths, there is a
single commit_resumed call once all pending statuses are processed.
This change required remote_target::remote_stop_ns to learn how to
handle stopping threads that were resumed but pending vCont. The
simplest example where that happens is when using the remote target in
all-stop, but with "maint set target-non-stop on", to force it to
operate in non-stop mode under the hood. If two threads hit a
breakpoint at the same time, GDB will receive two stop replies. It
will present the stop for one thread and save the other one in
thread_info::suspend::waitstatus.
Before this patch, when doing "continue", GDB first resumes the thread
without a pending status:
Sending packet: $vCont;c:p172651.172676#f3
It then consumes the pending status in the next fetch_inferior_event
call:
[infrun] do_target_wait_1: Using pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP for Thread 1517137.1517137.
[infrun] target_wait (-1.0.0, status) =
[infrun] 1517137.1517137.0 [Thread 1517137.1517137],
[infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP
It then realizes it needs to stop all threads to present the stop, so
stops the thread it just resumed:
[infrun] stop_all_threads: Thread 1517137.1517137 not executing
[infrun] stop_all_threads: Thread 1517137.1517174 executing, need stop
remote_stop called
Sending packet: $vCont;t:p172651.172676#04
This is an unnecessary resume/stop. With this patch, we don't commit
resumed threads after proceeding, because of the pending status:
[infrun] maybe_commit_resumed_all_process_targets: not requesting commit-resumed for target extended-remote, a thread has a pending waitstatus
When GDB handles the pending status and stop_all_threads runs, we stop a
resumed but pending vCont thread:
remote_stop_ns: Enqueueing phony stop reply for thread pending vCont-resume (1520940, 1520976, 0)
That thread was never actually resumed on the remote stub / gdbserver,
so we shouldn't send a packet to the remote side asking to stop the
thread.
Note that there are paths that resume the target and then do a
synchronous blocking wait, in sort of nested event loop, via
wait_sync_command_done. For example, inferior function calls, or any
run control command issued from a breakpoint command list. We handle
that making wait_sync_command_one a "sync" point -- force forward
progress, or IOW, force-enable commit-resumed state.
gdb/ChangeLog:
yyyy-mm-dd Simon Marchi <simon.marchi@efficios.com>
Pedro Alves <pedro@palves.net>
* infcmd.c (run_command_1, attach_command, detach_command)
(interrupt_target_1): Use scoped_disable_commit_resumed.
* infrun.c (do_target_resume): Remove
target_commit_resume call.
(commit_resume_all_targets): Remove.
(maybe_set_commit_resumed_all_targets): New.
(maybe_call_commit_resumed_all_targets): New.
(enable_commit_resumed): New.
(scoped_disable_commit_resumed::scoped_disable_commit_resumed)
(scoped_disable_commit_resumed::~scoped_disable_commit_resumed)
(scoped_disable_commit_resumed::reset)
(scoped_disable_commit_resumed::reset_and_commit)
(scoped_enable_commit_resumed::scoped_enable_commit_resumed)
(scoped_enable_commit_resumed::~scoped_enable_commit_resumed):
New.
(proceed): Use scoped_disable_commit_resumed and
maybe_call_commit_resumed_all_targets.
(fetch_inferior_event): Use scoped_disable_commit_resumed.
* infrun.h (struct scoped_disable_commit_resumed): New.
(maybe_call_commit_resumed_all_process_targets): New.
(struct scoped_enable_commit_resumed): New.
* mi/mi-main.c (exec_continue): Use scoped_disable_commit_resumed.
* process-stratum-target.h (class process_stratum_target):
<commit_resumed_state>: New.
* record-full.c (record_full_wait_1): Change commit_resumed_state
around calling commit_resumed.
* remote.c (class remote_target) <commit_resume>: Rename to...
<commit_resumed>: ... this.
(struct stop_reply): Move up.
(remote_target::commit_resume): Rename to...
(remote_target::commit_resumed): ... this. Check if there is any
thread pending vCont resume.
(remote_target::remote_stop_ns): Generate stop replies for resumed
but pending vCont threads.
(remote_target::wait_ns): Add gdb_assert.
* target-delegates.c: Regenerate.
* target.c (target_wait, target_resume): Assert that the current
process_stratum target isn't in commit-resumed state.
(defer_target_commit_resume): Remove.
(target_commit_resume): Remove.
(target_commit_resumed): New.
(make_scoped_defer_target_commit_resume): Remove.
(target_stop): Assert that the current process_stratum target
isn't in commit-resumed state.
* target.h (struct target_ops) <commit_resume>: Rename to ...
<commit_resumed>: ... this.
(target_commit_resume): Remove.
(target_commit_resumed): New.
(make_scoped_defer_target_commit_resume): Remove.
* top.c (wait_sync_command_done): Use
scoped_enable_commit_resumed.
[1] https://github.com/ROCm-Developer-Tools/ROCgdb/
[2] https://github.com/ROCm-Developer-Tools/ROCdbgapi
Change-Id: I836135531a29214b21695736deb0a81acf8cf566
|
||
|
Simon Marchi
|
328d42d87e |
gdb: remove current_top_target function
The current_top_target function is a hidden dependency on the current inferior. Since I'd like to slowly move towards reducing our dependency on the global current state, remove this function and make callers use current_inferior ()->top_target () There is no expected change in behavior, but this one step towards making those callers use the inferior from their context, rather than refer to the global current inferior. gdb/ChangeLog: * target.h (current_top_target): Remove, make callers use the current inferior instead. * target.c (current_top_target): Remove. Change-Id: Iccd457036f84466cdaa3865aa3f9339a24ea001d |
||
|
Andrew Burgess
|
ebbc3a7d56 |
gdb: Delete SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTION
Replace the two macros SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTION with a member function on general_symbol_info. There should be no user visible change after this commit. gdb/ChangeLog: * breakpoint.c (resolve_sal_pc): Replace SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTION. * findvar.c (language_defn::read_var_value): Likewise. * infcmd.c (jump_command): Likewise. * linespec.c (minsym_found): Likewise. * maint.c (maintenance_translate_address): Likewise. * minsyms.c (lookup_minimal_symbol_by_pc_section): Likewise. (minimal_symbol_upper_bound): Likewise. * parse.c (find_minsym_type_and_address): Likewise. (operator_check_standard): Likewise. * printcmd.c (info_address_command): Likewise. * symmisc.c (dump_msymbols): Likewise. (print_symbol): Likewise. * symtab.c (general_symbol_info::obj_section): Define new function. (fixup_symbol_section): Replace SYMBOL_OBJ_SECTION. (find_pc_sect_compunit_symtab): Likewise. (find_function_start_sal): Likewise. (skip_prologue_sal): Replace SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTION. * symtab.h (struct general_symbol_info) <obj_section>: Declare new function. (SYMBOL_OBJ_SECTION): Delete. (MSYMBOL_OBJ_SECTION): Delete. |
||
Pedro Alves
|
408f66864a |
detach in all-stop with threads running
A following patch will add a testcase that has a number of threads constantly stepping over a breakpoint, and then has GDB detach the process, while threads are running. If we have more than one inferior running, and we detach from just one of the inferiors, we expect that the remaining inferior continues running. However, in all-stop, if GDB needs to pause the target for the detach, nothing is re-resuming the other inferiors after the detach. "info threads" shows the threads as running, but they really aren't. This fixes it. gdb/ChangeLog: * infcmd.c (detach_command): Hold strong reference to target, and if all-stop on entry, restart threads on exit. * infrun.c (switch_back_to_stepped_thread): Factor out bits to ... (restart_stepped_thread): ... this new function. Also handle trap_expected. (restart_after_all_stop_detach): New function. * infrun.h (restart_after_all_stop_detach): Declare. |
||
Joel Brobecker
|
3666a04883 |
Update copyright year range in all GDB files
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
||
|
Simon Marchi
|
dda83cd783 |
gdb, gdbserver, gdbsupport: fix leading space vs tabs issues
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695 |
||
Tom Tromey
|
7e10abd146 |
Remove the exec_bfd macro
This removes the exec_bfd macro, in favor of new accessors on program_space. In one spot the accessor can't be used; but this is still a big improvement over the macro, IMO. gdb/ChangeLog 2020-10-29 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_solib_create_inferior_hook): Update. * symfile.c (reread_symbols): Update. * symfile-mem.c (add_symbol_file_from_memory_command) (add_vsyscall_page): Update. * source-cache.c (source_cache::get_plain_source_lines): Update. * solib-svr4.c (find_program_interpreter, elf_locate_base) (svr4_current_sos_direct, svr4_exec_displacement) (svr4_relocate_main_executable): Update. (svr4_iterate_over_objfiles_in_search_order): Update. * solib-frv.c (enable_break2, enable_break): Update. * solib-dsbt.c (lm_base, enable_break): Update. * solib-darwin.c (find_program_interpreter) (darwin_solib_create_inferior_hook): Update. * sol-thread.c (rw_common, ps_pdmodel): Update. * rs6000-nat.c (rs6000_nat_target::create_inferior): Update. * remote.c (compare_sections_command) (remote_target::trace_set_readonly_regions): Update. * remote-sim.c (get_sim_inferior_data) (gdbsim_target::create_inferior, gdbsim_target::create_inferior): Update. (gdbsim_target_open, gdbsim_target::files_info): Update. * exec.h (exec_bfd): Remove macro. * progspace.c (initialize_progspace): Update. * proc-service.c (ps_addr_to_core_addr, core_addr_to_ps_addr): Update. * nto-procfs.c (nto_procfs_target::post_attach) (nto_procfs_target::create_inferior): Update. * maint.c (maintenance_info_sections): Update. * linux-thread-db.c (thread_db_target::get_thread_local_address): Update. * infcmd.c (post_create_inferior): Update. * gcore.c (default_gcore_arch, default_gcore_target): Update. (objfile_find_memory_regions): Update. * exec.c (validate_exec_file, exec_file_attach) (exec_read_partial_read_only, print_section_info): Update. * corelow.c (core_target_open): Update. * corefile.c (reopen_exec_file, validate_files): Update. * arm-tdep.c (gdb_print_insn_arm): Update. * arch-utils.c (gdbarch_update_p, default_print_insn): Update. * progspace.h (struct program_space) <exec_bfd, set_exec_bfd>: New methods. |
||
|
Simon Marchi
|
a0ff652f4c |
gdb: add inferior parameter to inferior_created observable
I think it would make sense for the inferior_created observable to say which inferior is being dealt with, rather than relying on it being the current inferior. This patch adds an inferior parameter to inferior_created, but does not change the callbacks to use it. gdb/ChangeLog: * aix-thread.c (aix_thread_inferior_created): Add inferior parameter. * bsd-uthread.c (bsd_uthread_inferior_created): Likewise. * dummy-frame.c (cleanup_dummy_frames): Likewise. * jit.c (jit_inferior_created): Likewise. * linux-thread-db.c (thread_db_inferior_created): Likewise. * m68k-linux-tdep.c (m68k_linux_inferior_created): Likewise. * observable.h (inferior_created): Likewise. * ravenscar-thread.c (ravenscar_inferior_created): Likewise. * symfile-mem.c (add_vsyscall_page): Likewise. * infcmd.c (post_create_inferior): Pass inferior argument. Change-Id: I2543d19ff055a9df6b269929faea10b27d2adc5e |
||
|
Tankut Baris Aktemur
|
b68bef998c |
gdb/infcmd: remove redundant clear_proceed_status call
In `attach_command`, there is a call to `init_wait_for_inferior` followed by a call to `clear_proceed_status`. However, `init_wait_for_inferior` already calls `clear_proceed_status`. Remove the redundant call. Regression-tested on X86_64 Linux. gdb/ChangeLog: 2020-10-07 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * infcmd.c (attach_command): Remove the redundant call to `clear_proceed_status`. |
||
|
Simon Marchi
|
a7aba2668a |
gdb: remove arguments from inferior_created observable
I noticed that non of the listeners of the inferior_created observable used either of the arguments. Remove them. This in turn allows removing the target parameter of post_create_inferior. Tested only by rebuilding. gdb/ChangeLog: * observable.h <inferior_created>: Remove parameters. Update all listeners. * inferior.h (post_create_inferior): Remove target parameter. Update all callers. Change-Id: I8944cefdc4447ed5347dc927b75abf1e7a0e27e6 |
||
|
Tom Tromey
|
55f6301ac0 |
Remove target_has_execution macro
This removes the object-like macro target_has_execution, replacing it with a function call. target_has_execution_current is also now handled by this function. gdb/ChangeLog 2020-09-28 Tom Tromey <tom@tromey.com> * inferior.h (class inferior) <has_execution>: Update. * windows-tdep.c (windows_solib_create_inferior_hook): Update. * valops.c (find_function_in_inferior) (value_allocate_space_in_inferior): Update. * top.c (kill_or_detach): Update. * target.c (target_preopen, set_target_permissions): Update. (target_has_execution_current): Remove. * sparc64-tdep.c (adi_examine_command, adi_assign_command): Update. * solib.c (update_solib_list, reload_shared_libraries): Update. * solib-svr4.c (svr4_solib_create_inferior_hook): Update. * solib-dsbt.c (enable_break): Update. * score-tdep.c (score7_fetch_inst): Update. * rs6000-nat.c (rs6000_nat_target::xfer_shared_libraries): Update. * remote.c (remote_target::start_remote) (remote_target::remote_check_symbols, remote_target::open_1) (remote_target::remote_detach_1, remote_target::verify_memory) (remote_target::xfer_partial, remote_target::read_description) (remote_target::get_min_fast_tracepoint_insn_len): Update. * record-full.c (record_full_open_1): Update. * record-btrace.c (record_btrace_target_open): Update. * objc-lang.c (lookup_objc_class, lookup_child_selector) (value_nsstring): Update. * linux-thread-db.c (add_thread_db_info) (thread_db_find_new_threads_silently, check_thread_db_callback) (try_thread_db_load_1, record_thread): Update. * linux-tdep.c (linux_info_proc, linux_vsyscall_range_raw): Update. * linux-fork.c (checkpoint_command): Update. * infrun.c (set_non_stop, set_observer_mode) (check_multi_target_resumption, for_each_just_stopped_thread) (maybe_remove_breakpoints, normal_stop) (class infcall_suspend_state): Update. * infcmd.c (ERROR_NO_INFERIOR, kill_if_already_running) (info_program_command, attach_command): Update. * infcall.c (call_function_by_hand_dummy): Update. * inf-loop.c (inferior_event_handler): Update. * gcore.c (gcore_command, derive_heap_segment): Update. * exec.c (exec_file_command): Update. * eval.c (evaluate_subexp): Update. * compile/compile.c (compile_to_object): Update. * cli/cli-dump.c (restore_command): Update. * breakpoint.c (update_watchpoint) (update_inserted_breakpoint_locations) (insert_breakpoint_locations, get_bpstat_thread): Update. * target.h (target_has_execution): Remove macro. (target_has_execution_current): Don't declare. (target_has_execution): Rename from target_has_execution_1. Add argument default. |
||
|
Tom Tromey
|
9dccd06e8a |
Remove target_has_registers macro
This removes the target_has_registers object-like macro, replacing it with the underlying function. gdb/ChangeLog 2020-09-28 Tom Tromey <tom@tromey.com> * tui/tui-regs.c (tui_get_register) (tui_data_window::show_registers): Update. * thread.c (scoped_restore_current_thread::restore) (scoped_restore_current_thread::scoped_restore_current_thread): Update. * regcache-dump.c (regcache_print): Update. * python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb): Update. * mi/mi-main.c (mi_cmd_data_write_register_values): Update. * mep-tdep.c (current_me_module, current_options): Update. * linux-thread-db.c (thread_db_load): Update. * infcmd.c (registers_info, info_vector_command) (info_float_command): Update. * ia64-tdep.c (ia64_frame_prev_register) (ia64_sigtramp_frame_prev_register): Update. * ia64-libunwind-tdep.c (libunwind_frame_prev_register): Update. * gcore.c (derive_stack_segment): Update. * frame.c (get_current_frame, has_stack_frames): Update. * findvar.c (language_defn::read_var_value): Update. * arm-tdep.c (arm_pc_is_thumb): Update. * target.c (target_has_registers): Rename from target_has_registers_1. * target.h (target_has_registers): Remove macro. (target_has_registers): Rename from target_has_registers_1. |
||
|
Simon Marchi
|
bd63c87008 |
gdb: remove TYPE_VECTOR
gdb/ChangeLog: * gdbtypes.h (TYPE_VECTOR): Remove, replace all uses with type::is_vector. Change-Id: I1ac28755af44b1585c190553f9961288c8fb9137 |
||
|
Simon Marchi
|
b1a35af270 |
gdb: remove unused fetch_inferior_event and inferior_event_handler parameters
I noticed that fetch_inferior_event receives the client_data parameter from its caller, inferior_event_handler, but doesn't actually need it. This patch removes it. In turn, inferior_event_handler doesn't use its parameter, so remove it too. The `data` argument used when registering remote_async_inferior_event_handler is changed to NULL, to avoid confusion. It could make people think that the value passed is used somewhere, when in fact it's not. gdb/ChangeLog: * inf-loop.c (inferior_event_handler): Remove client_data param. * inf-loop.h (inferior_event_handler): Likewise. * infcmd.c (step_1): Adjust. * infrun.c (proceed): Adjust. (fetch_inferior_event): Remove client_data param. (infrun_async_inferior_event_handler): Adjust. * infrun.h (fetch_inferior_event): Remove `void *` param. * linux-nat.c (handle_target_event): Adjust. * record-btrace.c (record_btrace_handle_async_inferior_event): Adjust. * record-full.c (record_full_async_inferior_event_handler): Adjust. * remote.c (remote_async_inferior_event_handler): Adjust. Change-Id: I3c2aa1eb0ea3e0985df096660d2dcd794674f2ea |
||
Pedro Alves
|
05779d57f9 |
Make {get,set}_inferior_io_terminal inferior methods
This converts the get_inferior_io_terminal and
set_inferior_io_terminal free functions to inferior methods.
Since the related commands are called "tty", "{set,show}
inferior-tty", and MI's "-inferior-tty-{set,show}", to make the
connection between the commands and the code more obvious, the methods
are named set_tty/tty instead of set_io_terminal/io_terminal.
gdb/ChangeLog:
* fork-child.c (prefork_hook): Adjust.
* infcmd.c (set_inferior_io_terminal, get_inferior_io_terminal):
Delete.
(set_inferior_tty_command, show_inferior_tty_command): Adjust.
* inferior.c (inferior::set_tty, inferior::tty): New methods.
* inferior.h (set_inferior_io_terminal, get_inferior_io_terminal):
Remove declarations.
(struct inferior) <set_tty, tty>: New methods.
(struct inferior) <terminal>: Rename to ...
(struct inferior) <m_terminal>: ... this and make private.
* main.c (captured_main_1): Adjust.
* mi/mi-cmd-env.c (mi_cmd_inferior_tty_set): Adjust.
(mi_cmd_inferior_tty_show): Adjust.
* nto-procfs.c (nto_procfs_target::create_inferior): Adjust.
* windows-nat.c (windows_nat_target::create_inferior): Adjust.
|
||
|
Simon Marchi
|
58373b80f3 |
gdb: use make_unique_xstrdup in set_inferior_io_terminal
gdb/ChangeLog: * infcmd.c (set_inferior_io_terminal): Use make_unique_xstrdup. Change-Id: I38b6e753f58947531fe4a293d574bc27ec128f47 |
||
|
Simon Marchi
|
277474eea0 |
gdb: make inferior::terminal a unique ptr
This changes the inferior::terminal field to be a unique pointer, so its deallocation is automatically managed. gdb/ChangeLog: * inferior.h (struct inferior) <terminal>: Change type to gdb::unique_xmalloc_ptr<char>. * inferior.c (inferior::~inferior): Don't free inf->terminal. * infcmd.c (set_inferior_io_terminal): Don't free terminal field, adjust to unique pointer. (get_inferior_io_terminal): Adjust to unique pointer. Change-Id: Iedb6459b4f9eeae812b0cb9d514b5707d5107cdb |
||
Philippe Waroquiers
|
cf00cd6faf |
default-args: allow to define default arguments for aliases
Currently, a user can define an alias, but cannot have default
arguments for this alias.
This patch modifies the 'alias' command so that default args can
be provided.
(gdb) h alias
Define a new command that is an alias of an existing command.
Usage: alias [-a] [--] ALIAS = COMMAND [DEFAULT-ARGS...]
ALIAS is the name of the alias command to create.
COMMAND is the command being aliased to.
Options:
-a
Specify that ALIAS is an abbreviation of COMMAND.
Abbreviations are not used in command completion..
GDB will automatically prepend the provided DEFAULT-ARGS to the list
of arguments explicitly provided when using ALIAS.
Use "help aliases" to list all user defined aliases and their default args.
Examples:
Make "spe" an alias of "set print elements":
alias spe set print elements
Make "elms" an alias of "elements" in the "set print" command:
alias -a set print elms set print elements
Make "btf" an alias of "backtrace -full -past-entry -past-main" :
alias btf = backtrace -full -past-entry -past-main
Make "wLapPeu" an alias of 2 nested "with":
alias wLapPeu = with language pascal -- with print elements unlimited --
(gdb)
The way 'default-args' is implemented makes it trivial to set default
args also for GDB commands (such as "backtrace") and for GDB pre-defined
aliases (such as "bt"). It was however deemed better to not allow to
define default arguments for pre-defined commands and aliases, to avoid
users believing that e.g. default args for "backtrace" would apply to "bt".
If needed, default-args could be allowed for GDB predefined commands
and aliases by adding a command
'set default-args GDB_COMMAND_OR_PREDEFINED_ALIAS [DEFAULT-ARGS...]'.
* 'alias' command now has a completer that helps to complete:
- ALIAS (if the user defines an alias after a prefix),
- the aliased COMMAND
- the possible options for the aliased COMMAND.
* Help and apropos commands show the definitions of the aliases
that have default arguments, e.g.
(gdb) help backtrace
backtrace, btf, where, bt
alias btf = backtrace -full -past-entry -past-main
Print backtrace of all stack frames, or innermost COUNT frames.
Usage: backtrace [OPTION]... [QUALIFIER]... [COUNT | -COUNT]
Options:
-entry-values no|only|preferred|if-needed|both|compact|default
Set printing of function arguments at function entry.
...
gdb/ChangeLog
2020-06-22 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (lookup_cmd_for_default_args)
(alias_command_completer)
(make_alias_options_def_group): New functions.
(alias_opts, alias_option_defs): New struct and array.
(alias_usage_error): Update usage.
(alias_command): Handles optional DEFAULT-ARGS... arguments.
Use option framework.
(_initialize_cli_cmds): Update alias command help.
Update aliases command help.
(show_user):
Add NULL for new default_args lookup_cmd argument.
(valid_command_p): Rename to validate_aliased_command.
Add NULL for new default_args lookup_cmd argument. Verify that the
aliased_command has no default args.
* cli/cli-decode.c (help_cmd): Show aliases definitions.
(lookup_cmd_1, lookup_cmd): New argument default_args.
(add_alias_cmd):
Add NULL for new default_args lookup_cmd argument.
(print_help_for_command): Show default args under the layout
alias some_alias = some_aliased_cmd some_alias_default_arg.
* cli/cli-decode.h (struct cmd_list_element): New member default_args.
xfree default_args in destructor.
* cli/cli-script.c (process_next_line, do_define_command):
Add NULL for new default_args lookup_cmd argument.
* command.h: Declare new default_args argument in lookup_cmd
and lookup_cmd_1.
* completer.c (complete_line_internal_1):
Add NULL for new default_args lookup_cmd or lookup_cmd_1 argument.
* guile/scm-cmd.c (gdbscm_parse_command_name): Likewise.
* guile/scm-param.c (add_setshow_generic, pascm_parameter_defined_p):
Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* python/py-auto-load.c (gdbpy_initialize_auto_load): Likewise.
* python/py-cmd.c (gdbpy_parse_command_name): Likewise.
* python/py-param.c (add_setshow_generic): Likewise.
* remote.c (_initialize_remote): Likewise.
* top.c (execute_command): Prepend default_args if command has some.
(set_verbose):
Add NULL for new default_args lookup_cmd or lookup_cmd_1 argument.
* tracepoint.c (validate_actionline, encode_actions_1):
Add NULL for new default_args lookup_cmd or lookup_cmd_1 argument.
|
||
Michael Weghorn
|
8c4b5f3d98 |
gdbsupport: Let construct_inferior_arguments take gdb::array_view param
Adapt the construct_inferior_arguments function to take a gdb::array_view<char * const> parameter instead of a char * array and an int indicating the length and adapt the only call site. This will allow calling it more simply in a follow-up patch introducing more uses of the function. gdbsupport/ChangeLog: * common-inferior.cc, common-inferior.h (construct_inferior_arguments): Adapt to take a gdb::array_view<char * const> parameter. Adapt call site. Change-Id: I1c6496c8c0b0eb3ef3fda96e9e3bd64c5e6cac3c |
||
|
Michael Weghorn
|
c699004a29 |
gdbsupport: Adapt construct_inferior_arguments
Allow construct_inferior_arguments to handle zero args and have it return a std::string, similar to how stringify_argv in gdbsupport/common-utils does. Also, add a const qualifier for the second parameter, since it is only read, not written to. The intention is to replace existing uses of stringify_argv by construct_inferior_arguments in a subsequent step, since construct_inferior_arguments properly handles special characters, while stringify_argv doesn't. gdbsupport/ChangeLog: * common-inferior.cc, common-inferior.h (construct_inferior_arguments): Adapt to handle zero args and return a std::string. Adapt call site. Change-Id: I126c4390a1018c7527b0b8fd545252ab8a5a7adc |
||
|
Michael Weghorn
|
92651b1d91 |
gdb: Move construct_inferior_arguments to gdbsupport
This moves the function construct_inferior_arguments from
gdb/inferior.h and gdb/infcmd.c to gdbsupport/common-inferior.{h,cc}.
While at it, also move the function's comment to the header file
to align with current standards.
The intention is to use it from gdbserver in a follow-up commit.
gdb/ChangeLog:
* infcmd.c, inferior.h: (construct_inferior_arguments):
Moved function from here to gdbsupport/common-inferior.{h,cc}
gdbsupport/ChangeLog:
* common-inferior.h, common-inferior.cc: (construct_inferior_arguments):
Move function here from gdb/infcmd.c, gdb/inferior.h
Change-Id: Ib9290464ce8c0872f605d8829f88352d064c30d6
|
||
|
Philippe Waroquiers
|
57b4f16e49 |
Ensure class_alias is only used for user-defined aliases.
This commit finally does the (small) change that started this patch series. It ensures that the class_alias is only used for user-defined aliases. So, the few GDB pre-defined aliases that were using the 'class_alias' class are now using a real help class, typically the class of the aliased command. gdb/ChangeLog 2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be> * command.h (enum command_class): Improve comments, document that class_alias is for user-defined aliases, give the class name for each class, remove unused class_xdb. * cli/cli-decode.c (add_com_alias): Document THECLASS intended usage. * breakpoint.c (_initialize_breakpoint): Replace class_alias by a precise class. * infcmd.c (_initialize_infcmd): Likewise. * reverse.c (_initialize_reverse): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. gdb/testsuite/ChangeLog 2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/alias.exp: Verify 'help aliases' shows user defined aliases. |
||
|
Simon Marchi
|
7813437494 |
gdb: remove TYPE_CODE macro
Remove TYPE_CODE, changing all the call sites to use type::code directly. This is quite a big diff, but this was mostly done using sed and coccinelle. A few call sites were done by hand. gdb/ChangeLog: * gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use type::code instead. |
||
Tom Tromey
|
0743fc83c0 |
Replace most calls to help_list and cmd_show_list
Currently there are many prefix commands that do nothing but call either help_list or cmd_show_list. I happened to notice that one such call, for "set print type", used the wrong command list parameter, causing incorrect output. Rather than fix this bug in isolation, I decided to eliminate this possibility by adding two new ways to add prefix commands, which simply route the call to help_list or cmd_show_list, as appropriate. This makes it impossible for a mismatch to occur. In some cases, a bit of output was removed; however, I don't think this output in general was very useful. It seemed redundant with what's already printed by help_list. A representative example is this hunk, removed from ada-lang.c: - printf_unfiltered (_(\ -"\"set ada\" must be followed by the name of a setting.\n")); This simplified the CLI style set/show commands quite a bit, and allowed the deletion of a macro. This also cleans up some unusual code in windows-tdep.c. Tested on x86-64 Fedora 30. Note that I have no way to build the go32-nat.c change. gdb/ChangeLog 2020-04-17 Tom Tromey <tromey@adacore.com> * auto-load.c (show_auto_load_cmd): Remove. (auto_load_show_cmdlist_get): Use add_show_prefix_cmd. * arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd. (maintenance_print_arc_command): Remove. * tui/tui-win.c (tui_command): Remove. (tui_get_cmd_list): Use add_basic_prefix_cmd. * tui/tui-layout.c (tui_layout_command): Remove. (_initialize_tui_layout): Use add_basic_prefix_cmd. * python/python.c (user_set_python, user_show_python): Remove. (_initialize_python): Use add_basic_prefix_cmd, add_show_prefix_cmd. * guile/guile.c (set_guile_command, show_guile_command): Remove. (install_gdb_commands): Use add_basic_prefix_cmd, add_show_prefix_cmd. (info_guile_command): Remove. * dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove. (_initialize_dwarf2_read): Use add_basic_prefix_cmd, add_show_prefix_cmd. * cli/cli-style.h (class cli_style_option) <add_setshow_commands>: Remove do_set and do_show parameters. * cli/cli-style.c (set_style, show_style): Remove. (_initialize_cli_style): Use add_basic_prefix_cmd, add_show_prefix_cmd. (cli_style_option::add_setshow_commands): Remove do_set and do_show parameters. (cli_style_option::add_setshow_commands): Use add_basic_prefix_cmd, add_show_prefix_cmd. (STYLE_ADD_SETSHOW_COMMANDS): Remove macro. (set_style_name): Remove. * cli/cli-dump.c (dump_command, append_command): Remove. (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Remove. (_initialize_cli_dump): Use add_basic_prefix_cmd. * windows-tdep.c (w32_prefix_command_valid): Remove global. (init_w32_command_list): Remove; move into ... (_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Remove. (_initialize_valprint): Use add_basic_prefix_cmd, add_show_prefix_cmd. * typeprint.c (set_print_type, show_print_type): Remove. (_initialize_typeprint): Use add_basic_prefix_cmd, add_show_prefix_cmd. * record.c (set_record_command, show_record_command): Remove. (_initialize_record): Use add_basic_prefix_cmd, add_show_prefix_cmd. * cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd, add_show_prefix_cmd. (info_command, show_command, set_debug, show_debug): Remove. * top.h (set_history, show_history): Don't declare. * top.c (set_history, show_history): Remove. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Remove. (_initialize_target_descriptions): Use add_basic_prefix_cmd, add_show_prefix_cmd. * symtab.c (info_module_command): Remove. (_initialize_symtab): Use add_basic_prefix_cmd. * symfile.c (overlay_command): Remove. (_initialize_symfile): Use add_basic_prefix_cmd. * sparc64-tdep.c (info_adi_command): Remove. (_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd. * sh-tdep.c (show_sh_command, set_sh_command): Remove. (_initialize_sh_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * serial.c (serial_set_cmd, serial_show_cmd): Remove. (_initialize_serial): Use add_basic_prefix_cmd, add_show_prefix_cmd. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove. (_initialize_ser_tcp): Use add_basic_prefix_cmd, add_show_prefix_cmd. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command) (_initialize_rs6000_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * riscv-tdep.c (show_riscv_command, set_riscv_command) (show_debug_riscv_command, set_debug_riscv_command): Remove. (_initialize_riscv_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * remote.c (remote_command, set_remote_cmd): Remove. (_initialize_remote): Use add_basic_prefix_cmd. * record-full.c (set_record_full_command) (show_record_full_command): Remove. (_initialize_record_full): Use add_basic_prefix_cmd, add_show_prefix_cmd. * record-btrace.c (cmd_set_record_btrace) (cmd_show_record_btrace, cmd_set_record_btrace_bts) (cmd_show_record_btrace_bts, cmd_set_record_btrace_pt) (cmd_show_record_btrace_pt): Remove. (_initialize_record_btrace): Use add_basic_prefix_cmd, add_show_prefix_cmd. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Remove. (_initialize_ravenscar): Use add_basic_prefix_cmd, add_show_prefix_cmd. * mips-tdep.c (show_mips_command, set_mips_command) (_initialize_mips_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * maint.c (maintenance_command, maintenance_info_command) (maintenance_check_command, maintenance_print_command) (maintenance_set_cmd, maintenance_show_cmd): Remove. (_initialize_maint_cmds): Use add_basic_prefix_cmd, add_show_prefix_cmd. (show_per_command_cmd): Remove. * maint-test-settings.c (maintenance_set_test_settings_cmd): Remove. (maintenance_show_test_settings_cmd): Remove. (_initialize_maint_test_settings): Use add_basic_prefix_cmd, add_show_prefix_cmd. * maint-test-options.c (maintenance_test_options_command): Remove. (_initialize_maint_test_options): Use add_basic_prefix_cmd. * macrocmd.c (macro_command): Remove (_initialize_macrocmd): Use add_basic_prefix_cmd. * language.c (set_check, show_check): Remove. (_initialize_language): Use add_basic_prefix_cmd, add_show_prefix_cmd. * infcmd.c (unset_command): Remove. (_initialize_infcmd): Use add_basic_prefix_cmd. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove. (_initialize_i386_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * go32-nat.c (go32_info_dos_command): Remove. (_initialize_go32_nat): Use add_basic_prefix_cmd. * cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd) (do_show_prefix_cmd, add_show_prefix_cmd): New functions. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove. (_initialize_frame): Use add_basic_prefix_cmd, add_show_prefix_cmd. * dcache.c (set_dcache_command, show_dcache_command): Remove. (_initialize_dcache): Use add_basic_prefix_cmd, add_show_prefix_cmd. * cp-support.c (maint_cplus_command): Remove. (_initialize_cp_support): Use add_basic_prefix_cmd. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd, _initialize_btrace): Use add_basic_prefix_cmd, add_show_prefix_cmd. * breakpoint.c (save_command): Remove. (_initialize_breakpoint): Use add_basic_prefix_cmd. * arm-tdep.c (set_arm_command, show_arm_command): Remove. (_initialize_arm_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd) (set_ada_command, show_ada_command): Remove. (_initialize_ada_language): Use add_basic_prefix_cmd, add_show_prefix_cmd. * command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare. gdb/testsuite/ChangeLog 2020-04-17 Tom Tromey <tromey@adacore.com> * gdb.cp/maint.exp (test_help): Simplify multiple_help_body. Update tests. * gdb.btrace/cpu.exp: Update tests. * gdb.base/maint.exp: Update tests. * gdb.base/default.exp: Update tests. * gdb.base/completion.exp: Update tests. |
||
|
Tom Tromey
|
3444c526a3 |
Use common_val_print in infcmd.c
This changes some spots in infcmd.c to use common_val_print (which, despite its name, is a value-based API) rather than val_print. gdb/ChangeLog 2020-03-13 Tom Tromey <tom@tromey.com> * infcmd.c (default_print_one_register_info): Use common_val_print. |
||
|
Simon Marchi
|
29734269a7 |
Pass thread_info pointer to various inferior control functions
[ Migrating this from Gerrit: https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/321 ] I noticed that some functions in infcmd and infrun call each other and all call inferior_thread, while they could just get the thread_info pointer from their caller. That means less calls to inferior_thread, so less reliance on global state, since inferior_thread reads inferior_ptid. The paths I am unsure about are: - fetch_inferior_event calls... - step_command_fsm::should_stop calls... - prepare_one_step and - process_event_stop_test calls... - set_step_info Before this patch, prepare_one_step gets the thread pointer using inferior_thread. After this patch, it gets it from the execution_control_state structure in fetch_inferior_event. Are we sure that the thread from the execution_control_state structure is the same as the one inferior_thread would return? This code path is used when a thread completes a step, but the user had specified a step count (e.g. "step 5") so we decide to do one more step. It would be strange (and even a bug I suppose) if the thread in the ecs structure in fetch_inferior_event was not the same thread that is prepared to stepped by prepare_one_step. So I believe passing the ecs thread is fine. The same logic applies to process_event_stop_test calling set_step_info. gdb/ChangeLog: * infrun.h: Forward-declare thread_info. (set_step_info): Add thread_info parameter, add doc. * infrun.c (set_step_info): Add thread_info parameter, move doc to header. * infrun.c (process_event_stop_test): Pass thread to set_step_info call. * infcmd.c (set_step_frame): Add thread_info pointer, pass it to set_step_info. (prepare_one_step): Add thread_info parameter, pass it to set_step_frame and prepare_one_step (recursive) call. (step_1): Pass thread to prepare_one_step call. (step_command_fsm::should_stop): Pass thread to prepare_one_step. (until_next_fsm): Pass thread to set_step_frame call. (finish_command): Pass thread to set_step_info call. |
||
|
Pedro Alves
|
c47f70e2ce |
Fix -Werror-stringop error on infcmd.c:construct_inferior_arguments
While testing a GCC 10 build of our git HEAD, Sergio noticed an error
triggered by -Werror-stringop on
infcmd.c:construct_inferior_arguments. One of the things the function
does is calculate the length of the string that will hold the
inferior's arguments. GCC warns us that 'length' can be 0, which can
lead to undesired behaviour:
../../gdb/infcmd.c: In function 'char* construct_inferior_arguments(int, char**)':
../../gdb/infcmd.c:369:17: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
369 | result[0] = '\0';
| ~~~~~~~~~~^~~~~~
../../gdb/infcmd.c:368:33: note: at offset 0 to an object with size 0 allocated by 'xmalloc' here
368 | result = (char *) xmalloc (length);
| ~~~~~~~~^~~~~~~~
The solution here is to assert that 'argc' is greater than 0 on entry,
which makes GCC understand that the loops always run at least once,
and thus 'length' is always > 0.
Tested by rebuilding.
gdb/ChangeLog:
2020-01-29 Pedro Alves <palves@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* infcmd.c (construct_inferior_arguments): Assert that
'argc' is greater than 0.
Change-Id: Ide8407cbedcb4921de1843a6a15bbcb7676c7d26
|
||
|
Philippe Waroquiers
|
a2fedca99c |
Implement 'set/show exec-file-mismatch'.
This option allows to tell GDB to detect and possibly handle mismatched exec-files. A recurrent problem with GDB is that GDB uses the wrong exec-file when using the attach/detach commands successively. Also, in case the user specifies a file on the command line but attaches to the wrong PID, this error is not made visible and gives a not user understandable behaviour. For example: $ gdb ... (gdb) atta 2682 ############################################ PID running 'sleepers' executable Attaching to process 2682 [New LWP 2683] [New LWP 2684] [New LWP 2685] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". 0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84 84 ../sysdeps/unix/syscall-template.S: No such file or directory. (gdb) det Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682 [Inferior 1 (process 2682) detached] (gdb) atta 31069 ############################################ PID running 'gdb' executable Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069 Reading symbols from /lib64/ld-linux-x86-64.so.2... Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug... 0x00007f43c23478a0 in ?? () (gdb) bt #0 0x00007f43c23478a0 in ?? () #1 0x0000558909e3ad91 in ?? () #2 0x0000202962646700 in ?? () #3 0x00007ffc69c74e70 in ?? () #4 0x000055890c1d2350 in ?? () #5 0x0000000000000000 in ?? () (gdb) The second attach has kept the executable of the first attach. (in this case, 31069 is the PID of a GDB, that has nothing to do with the first determined 'sleepers' executable). Similarly, if specifying an executable, but attaching to a wrong pid, we get: gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers ... Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers... (gdb) atta 31069 ############################################ PID running 'gdb' executable Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069 Reading symbols from /lib64/ld-linux-x86-64.so.2... Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug... 0x00007f43c23478a0 in ?? () (gdb) bt #0 0x00007f43c23478a0 in ?? () #1 0x0000558909e3ad91 in ?? () #2 0x0000202962646700 in ?? () #3 0x00007ffc69c74e70 in ?? () #4 0x000055890c1d2350 in ?? () #5 0x0000000000000000 in ?? () (gdb) And it is unclear to the user what has happened/what is going wrong. This patch series implements a new option: (gdb) apropos exec-file-mismatch set exec-file-mismatch -- Set exec-file-mismatch handling (ask|warn|off). show exec-file-mismatch -- Show exec-file-mismatch handling (ask|warn|off). (gdb) help set exec-file-mismatch Set exec-file-mismatch handling (ask|warn|off). Specifies how to handle a mismatch between the current exec-file name loaded by GDB and the exec-file name automatically determined when attaching to a process: ask - warn the user and ask whether to load the determined exec-file. warn - warn the user, but do not change the exec-file. off - do not check for mismatch. "ask" means: in case of mismatch between the current exec-file name and the automatically determined exec-file name of the PID we are attaching to, give a warning to the user and ask whether to load the automatically determined exec-file. "warn" means: in case of mismatch, just give a warning to the user. "off" means: do not check for mismatch. This fixes PR gdb/17626. There was a previous trial to fix this PR. See https://sourceware.org/ml/gdb-patches/2015-07/msg00118.html This trial was however only fixing the problem for the automatically determined executable files when doing attach. It was differentiating the 'user specified executable files' ("sticky") from the executable files automatically found by GDB. But such user specified sticky executables are in most cases due to a wrong manipulation by the user, giving unexpected results such as backtrace showing no function like in the above example. This patch ensures that whenever a process executable can be determined, that the user is warned if there is a mismatch. The same tests as above then give: (gdb) atta 2682 Attaching to process 2682 [New LWP 2683] [New LWP 2684] [New LWP 2685] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". 0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84 84 ../sysdeps/unix/syscall-template.S: No such file or directory. (gdb) det Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682 [Inferior 1 (process 2682) detached] (gdb) atta 31069 Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069 warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb exec-file-mismatch handling is currently "ask" Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb... Setting up the environment for debugging gdb. ... Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug... 0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84 84 ../sysdeps/unix/syscall-template.S: No such file or directory. (top-gdb) bt During symbol reading: incomplete CFI data; unspecified registers (e.g., rax) at 0x7f43c23478ad During symbol reading: unsupported tag: 'DW_TAG_unspecified_type' During symbol reading: cannot get low and high bounds for subprogram DIE at 0x12282a7 During symbol reading: Child DIE 0x12288ba and its abstract origin 0x1228b26 have different parents During symbol reading: DW_AT_call_target target DIE has invalid low pc, for referencing DIE 0x1229540 [in module /bd/home/philippe/gdb/git/build_fixes/gdb/gdb] #0 0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84 #1 0x0000558909e3ad91 in poll (__timeout=-1, __nfds=<optimized out>, __fds=<optimized out>) at /usr/include/x86_64-linux-gnu/bits/poll2.h:46 #2 gdb_wait_for_event (block=block@entry=1) at ../../fixes/gdb/event-loop.c:772 #3 0x0000558909e3aef4 in gdb_do_one_event () at ../../fixes/gdb/event-loop.c:347 #4 0x0000558909e3b085 in gdb_do_one_event () at ../../fixes/gdb/common/common-exceptions.h:219 #5 start_event_loop () at ../../fixes/gdb/event-loop.c:371 During symbol reading: Member function "~_Sp_counted_base" (offset 0x1c69bf7) is virtual but the vtable offset is not specified During symbol reading: Multiple children of DIE 0x1c8f5a0 refer to DIE 0x1c8f0ee as their abstract origin #6 0x0000558909ed3b78 in captured_command_loop () at ../../fixes/gdb/main.c:331 #7 0x0000558909ed4b6d in captured_main (data=<optimized out>) at ../../fixes/gdb/main.c:1174 #8 gdb_main (args=<optimized out>) at ../../fixes/gdb/main.c:1190 #9 0x0000558909c1e9a8 in main (argc=<optimized out>, argv=<optimized out>) at ../../fixes/gdb/gdb.c:32 (top-gdb) gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers ... Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers... (gdb) atta 31069 Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069 warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb exec-file-mismatch handling is currently "ask" Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb... Setting up the environment for debugging gdb. .... In other words, it now works as intuitively expected by the user. If ever the user gave the correct executable on the command line, then attached to the wrong pid, then confirmed loading the wrong executable, the user can simply fix this by detaching, and attaching to the correct pid, GDB will then tell again to the user that the exec-file might better be loaded. The default value of "ask" is chosen instead of e.g. "warn" as in most cases, switching of executable will be the correct action, and in any case, the user can decide to not load the executable, as GDB asks a confirmation to the user to load the new executable. For settings "ask" and "warn", the new function validate_exec_file () tries to get the inferior pid exec file and compares it with the current exec file. In case of mismatch, it warns the user and optionally load the executable. This function is called in the attach_command implementation to cover most cases of attaching to a running process. It must also be called in remote.c, as the attach command is not supported for all types of remote gdbserver. gdb/ChangeLog 2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be> * exec.c (exec_file_mismatch_names, exec_file_mismatch_mode) (show_exec_file_mismatch_command, set_exec_file_mismatch_command) (validate_exec_file): New variables, enums, functions. (exec_file_locate_attach, print_section_info): Style the filenames. (_initialize_exec): Install show_exec_file_mismatch_command and set_exec_file_mismatch_command. * gdbcore.h (validate_exec_file): Declare. * infcmd.c (attach_command): Call validate_exec_file. * remote.c ( remote_target::remote_add_inferior): Likewise. |
||
|
Simon Marchi
|
8dc3273e0c |
Use get_thread_regcache instead of get_current_regcache in post_create_inferior
In post_create_inferior, we get the current thread using the inferior_thread function and store it in `thr`. We then call get_current_regcache immediately after, which does: return get_thread_regcache (inferior_thread ()); This patch makes post_create_inferior use get_thread_regcache, passing `thr`, saving an unnecessary inferior_thread call. gdb/ChangeLog: * infcmd.c (post_create_inferior): Use get_thread_regcache instead of get_current_regcache. |
||
|
Simon Marchi
|
6c2659886f |
gdb: add back declarations for _initialize functions
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit
|
||
|
Pedro Alves
|
5b6d1e4fa4 |
Multi-target support
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
|
||
|
Pedro Alves
|
ab1ddbcf11 |
Some get_last_target_status tweaks
- Make get_last_target_status arguments optional. A following patch will add another argument to get_last_target_status (the event's target), and passing nullptr when we don't care for some piece of info is handier than creating dummy local variables. - Declare nullify_last_target_wait_ptid in a header, and remove the local extern declaration from linux-fork.c. gdb/ChangeLog: 2020-01-10 Pedro Alves <palves@redhat.com> * break-catch-sig.c (signal_catchpoint_print_it): Don't pass a ptid to get_last_target_status. * break-catch-syscall.c (print_it_catch_syscall): Don't pass a ptid to get_last_target_status. * infcmd.c (continue_command): Don't pass a target_waitstatus to get_last_target_status. (info_program_command): Don't pass a target_waitstatus to get_last_target_status. * infrun.c (init_wait_for_inferior): Use nullify_last_target_wait_ptid. (get_last_target_status): Handle nullptr arguments. (nullify_last_target_wait_ptid): Clear target_last_waitstatus. (print_stop_event): Don't pass a ptid to get_last_target_status. (normal_stop): Don't pass a ptid to get_last_target_status. * infrun.h (get_last_target_status, set_last_target_status): Move comments here and update. (nullify_last_target_wait_ptid): Declare. * linux-fork.c (fork_load_infrun_state): Remove local extern declaration of nullify_last_target_wait_ptid. * linux-nat.c (get_detach_signal): Don't pass a target_waitstatus to get_last_target_status. |
||
|
Pedro Alves
|
bd420a2dff |
Delete unnecessary code from kill_command
I believe this comment:
/* Killing off the inferior can leave us with a core file. If
so, print the state we are left in. */
Referred to the fact that a decade ago, by design, GDB would let you
type "run" when debugging a core dump, keeping the core open. That
"run" would push a process_stratum target on the target stack for the
live process, and, the core would remain open -- we used to have a
core_stratum. When the live process was killed/detached or exited,
GDB would go back to debugging the core, since the core_stratum target
was now at the top of the stack. That design had a number of
problems, see here for example:
https://sourceware.org/ml/gdb-patches/2008-08/msg00290.html
In 2010, core_stratum was finaly eliminated and cores now have
process_stratum too, with commit
|
||
|
Joel Brobecker
|
b811d2c292 |
Update copyright year range in all GDB files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
||
Bernd Edlinger
|
4a4c04f1f4 |
Check all inline frames if they are marked for skip
This makes the skip command work in optimized builds, where skipped functions may be inlined. Previously that was only working when stepping into a non-inlined function. |
||
Christian Biesinger
|
987012b89b |
Replace SYMBOL_*_NAME accessors with member functions
Similar to the MSYMBOL version of this patch, improves readability and will eventually allow making name private. gdb/ChangeLog: 2019-11-22 Christian Biesinger <cbiesinger@google.com> * ada-exp.y: Update. * ada-lang.c (sort_choices): Update. (ada_print_symbol_signature): Update. (resolve_subexp): Update. (ada_parse_renaming): Update. (ada_read_renaming_var_value): Update. (lesseq_defined_than): Update. (remove_extra_symbols): Update. (remove_irrelevant_renamings): Update. (ada_add_block_symbols): Update. (ada_collect_symbol_completion_matches): Update. (ada_is_renaming_symbol): Update. (aggregate_assign_from_choices): Update. (ada_evaluate_subexp): Update. (ada_has_this_exception_support): Update. (ada_is_non_standard_exception_sym): Update. (ada_add_exceptions_from_frame): Update. (ada_add_global_exceptions): Update. (ada_print_subexp): Update. * ax-gdb.c (gen_var_ref): Update. (gen_maybe_namespace_elt): Update. (gen_expr_for_cast): Update. (gen_expr): Update. * block.h: Update. * blockframe.c (find_pc_partial_function): Update. * breakpoint.c (print_breakpoint_location): Update. (update_static_tracepoint): Update. * btrace.c (ftrace_print_function_name): Update. (ftrace_function_switched): Update. * buildsym.c (find_symbol_in_list): Update. * c-exp.y: Update. * c-typeprint.c (c_print_typedef): Update. (c_type_print_template_args): Update. * cli/cli-cmds.c (edit_command): Update. (list_command): Update. (print_sal_location): Update. * coffread.c (patch_opaque_types): Update. (process_coff_symbol): Update. (coff_read_enum_type): Update. * compile/compile-c-symbols.c (c_symbol_substitution_name): Update. (convert_one_symbol): Update. (hash_symname): Update. (eq_symname): Update. * compile/compile-cplus-symbols.c (convert_one_symbol): Update. * compile/compile-cplus-types.c (debug_print_scope): Update. * compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update. * compile/compile-object-load.c (get_out_value_type): Update. * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update. (search_symbol_list): Update. (cp_lookup_symbol_imports_or_template): Update. * cp-support.c (overload_list_add_symbol): Update. * ctfread.c (psymtab_to_symtab): Update. * dbxread.c (cp_set_block_scope): Update. * dictionary.c (iter_match_first_hashed): Update. (iter_match_next_hashed): Update. (insert_symbol_hashed): Update. (iter_match_next_linear): Update. * dictionary.h: Update. * dwarf2loc.c (func_get_frame_base_dwarf_block): Update. (locexpr_describe_location_piece): Update. (locexpr_describe_location_1): Update. (locexpr_generate_c_location): Update. (loclist_describe_location): Update. (loclist_generate_c_location): Update. * dwarf2read.c (dw2_debug_names_lookup_symbol): Update. (read_func_scope): Update. (process_enumeration_scope): Update. (new_symbol): Update. (dwarf2_const_value): Update. (dwarf2_symbol_mark_computed): Update. * eval.c (evaluate_funcall): Update. (evaluate_subexp_standard): Update. * expprint.c (print_subexp_standard): Update. (dump_subexp_body_standard): Update. * f-valprint.c (info_common_command_for_block): Update. * findvar.c (get_hosting_frame): Update. (default_read_var_value): Update. * go-lang.c (go_symbol_package_name): Update. * guile/scm-block.c (bkscm_print_block_smob): Update. * guile/scm-symbol.c (syscm_print_symbol_smob): Update. (gdbscm_symbol_name): Update. (gdbscm_symbol_linkage_name): Update. (gdbscm_symbol_print_name): Update. * infcall.c (get_function_name): Update. * infcmd.c (jump_command): Update. (finish_command): Update. * infrun.c (insert_exception_resume_breakpoint): Update. * linespec.c (canonicalize_linespec): Update. (create_sals_line_offset): Update. (convert_linespec_to_sals): Update. (complete_label): Update. (find_label_symbols_in_block): Update. * m2-typeprint.c (m2_print_typedef): Update. * mdebugread.c (mdebug_reg_to_regnum): Update. (parse_symbol): Update. (mylookup_symbol): Update. * mi/mi-cmd-stack.c (list_arg_or_local): Update. (list_args_or_locals): Update. * objc-lang.c (compare_selectors): Update. (info_selectors_command): Update. (compare_classes): Update. (info_classes_command): Update. (find_imps): Update. * p-typeprint.c (pascal_print_typedef): Update. * printcmd.c (build_address_symbolic): Update. (info_address_command): Update. (print_variable_and_value): Update. * python/py-framefilter.c (extract_sym): Update. (py_print_single_arg): Update. * python/py-symbol.c (sympy_str): Update. (sympy_get_name): Update. (sympy_get_linkage_name): Update. * python/python.c (gdbpy_rbreak): Update. * record-btrace.c (btrace_get_bfun_name): Update. (btrace_call_history): Update. * rust-lang.c (rust_print_typedef): Update. * solib-frv.c (frv_fdpic_find_canonical_descriptor): Update. * stabsread.c (stab_reg_to_regnum): Update. (define_symbol): Update. (read_enum_type): Update. (common_block_end): Update. (cleanup_undefined_types_1): Update. (scan_file_globals): Update. * stack.c (print_frame_arg): Update. (print_frame_args): Update. (find_frame_funname): Update. (info_frame_command_core): Update. (iterate_over_block_locals): Update. (print_block_frame_labels): Update. (do_print_variable_and_value): Update. (iterate_over_block_arg_vars): Update. (return_command): Update. * symmisc.c (dump_symtab_1): Update. (print_symbol): Update. * symtab.c (eq_symbol_entry): Update. (symbol_cache_dump): Update. (lookup_language_this): Update. (find_pc_sect_line): Update. (skip_prologue_sal): Update. (symbol_search::compare_search_syms): Update. (treg_matches_sym_type_name): Update. (search_symbols): Update. (print_symbol_info): Update. (rbreak_command): Update. (completion_list_add_symbol): Update. (find_gnu_ifunc): Update. (get_symbol_address): Update. (search_module_symbols): Update. (info_module_subcommand): Update. * symtab.h (SYMBOL_NATURAL_NAME): Remove. (SYMBOL_LINKAGE_NAME): Remove. (SYMBOL_DEMANGLED_NAME): Remove. (SYMBOL_PRINT_NAME): Remove. (SYMBOL_SEARCH_NAME): Remove. * tracepoint.c (set_traceframe_context): Update. (validate_actionline): Update. (collection_list::collect_symbol): Update. (encode_actions_1): Update. (info_scope_command): Update. (print_one_static_tracepoint_marker): Update. * typeprint.c (typedef_hash_table::add_template_parameters): Update. * valops.c (address_of_variable): Update. (find_overload_match): Update. (find_oload_champ): Update. Change-Id: I76bdc8b44eea6876bf03af9d351f8e90cc0154b2 |
||
Peeter Joot
|
34877895ca |
Adjust byte order variable display/change if DW_AT_endianity is present.
- Rationale:
It is possible for compilers to indicate the desired byte order
interpretation of scalar variables using the DWARF attribute:
DW_AT_endianity
A type flagged with this variable would typically use one of:
DW_END_big
DW_END_little
which instructs the debugger what the desired byte order interpretation
of the variable should be.
The GCC compiler (as of V6) has a mechanism for setting the desired byte
ordering of the fields within a structure or union. For, example, on a
little endian target, a structure declared as:
struct big {
int v;
short a[4];
} __attribute__( ( scalar_storage_order( "big-endian" ) ) );
could be used to ensure all the structure members have a big-endian
interpretation (the compiler would automatically insert byte swap
instructions before and after respective store and load instructions).
- To reproduce
GCC V8 is required to correctly emit DW_AT_endianity DWARF attributes
in all situations when the scalar_storage_order attribute is used.
A fix for (dwarf endianity instrumentation) for GCC V6-V7 can be found
in the URL field of the following PR:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82509
- Test-case:
A new test case (testsuite/gdb.base/endianity.*) is included with this
patch.
Manual testing for mixed endianity code has also been done with GCC V8.
See:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82509#c4
- Observed vs. expected:
Without this change, using scalar_storage_order that doesn't match the
target, such as
struct otherendian
{
int v;
} __attribute__( ( scalar_storage_order( "big-endian" ) ) );
would behave like the following on a little endian target:
Breakpoint 1 at 0x401135: file endianity.c, line 41.
(gdb) run
Starting program: /home/pjoot/freeware/t/a.out
Missing separate debuginfos, use: debuginfo-install glibc-2.17-292.el7.x86_64
Breakpoint 1, main () at endianity.c:41
41 struct otherendian o = {3};
(gdb) n
43 do_nothing (&o); /* START */
(gdb) p o
$1 = {v = 50331648}
(gdb) p /x
$2 = {v = 0x3000000}
whereas with this gdb enhancement we can access the variable with the user
specified endianity:
Breakpoint 1, main () at endianity.c:41
41 struct otherendian o = {3};
(gdb) p o
$1 = {v = 0}
(gdb) n
43 do_nothing (&o); /* START */
(gdb) p o
$2 = {v = 3}
(gdb) p o.v = 4
$3 = 4
(gdb) p o.v
$4 = 4
(gdb) x/4xb &o.v
0x7fffffffd90c: 0x00 0x00 0x00 0x04
(observe that the 4 byte int variable has a big endian representation in the
hex dump.)
gdb/ChangeLog
2019-11-21 Peeter Joot <peeter.joot@lzlabs.com>
Byte reverse display of variables with DW_END_big, DW_END_little
(DW_AT_endianity) dwarf attributes if different than the native
byte order.
* ada-lang.c (ada_value_binop):
Use type_byte_order instead of gdbarch_byte_order.
* ada-valprint.c (printstr):
(ada_val_print_string):
* ada-lang.c (value_pointer):
(ada_value_binop):
Use type_byte_order instead of gdbarch_byte_order.
* c-lang.c (c_get_string):
Use type_byte_order instead of gdbarch_byte_order.
* c-valprint.c (c_val_print_array):
Use type_byte_order instead of gdbarch_byte_order.
* cp-valprint.c (cp_print_class_member):
Use type_byte_order instead of gdbarch_byte_order.
* dwarf2loc.c (rw_pieced_value):
Use type_byte_order instead of gdbarch_byte_order.
* dwarf2read.c (read_base_type): Handle DW_END_big,
DW_END_little
* f-lang.c (f_get_encoding):
Use type_byte_order instead of gdbarch_byte_order.
* findvar.c (default_read_var_value):
Use type_byte_order instead of gdbarch_byte_order.
* gdbtypes.c (check_types_equal):
Require matching TYPE_ENDIANITY_NOT_DEFAULT if set.
(recursive_dump_type): Print TYPE_ENDIANITY_BIG,
and TYPE_ENDIANITY_LITTLE if set.
(type_byte_order): new function.
* gdbtypes.h (TYPE_ENDIANITY_NOT_DEFAULT): New macro.
(struct main_type) <flag_endianity_not_default>:
New field.
(type_byte_order): New function.
* infcmd.c (default_print_one_register_info):
Use type_byte_order instead of gdbarch_byte_order.
* p-lang.c (pascal_printstr):
Use type_byte_order instead of gdbarch_byte_order.
* p-valprint.c (pascal_val_print):
Use type_byte_order instead of gdbarch_byte_order.
* printcmd.c (print_scalar_formatted):
Use type_byte_order instead of gdbarch_byte_order.
* solib-darwin.c (darwin_current_sos):
Use type_byte_order instead of gdbarch_byte_order.
* solib-svr4.c (solib_svr4_r_ldsomap):
Use type_byte_order instead of gdbarch_byte_order.
* stap-probe.c (stap_modify_semaphore):
Use type_byte_order instead of gdbarch_byte_order.
* target-float.c (target_float_same_format_p):
Use type_byte_order instead of gdbarch_byte_order.
* valarith.c (scalar_binop):
(value_bit_index):
Use type_byte_order instead of gdbarch_byte_order.
* valops.c (value_cast):
Use type_byte_order instead of gdbarch_byte_order.
* valprint.c (generic_emit_char):
(generic_printstr):
(val_print_string):
Use type_byte_order instead of gdbarch_byte_order.
* value.c (unpack_long):
(unpack_bits_as_long):
(unpack_value_bitfield):
(modify_field):
(pack_long):
(pack_unsigned_long):
Use type_byte_order instead of gdbarch_byte_order.
* findvar.c (unsigned_pointer_to_address):
(signed_pointer_to_address):
(unsigned_address_to_pointer):
(address_to_signed_pointer):
(default_read_var_value):
(default_value_from_register):
Use type_byte_order instead of gdbarch_byte_order.
* gnu-v3-abi.c (gnuv3_make_method_ptr):
Use type_byte_order instead of gdbarch_byte_order.
* riscv-tdep.c (riscv_print_one_register_info):
Use type_byte_order instead of gdbarch_byte_order.
gdb/testsuite/ChangeLog
2019-11-21 Peeter Joot <peeter.joot@lzlabs.com>
* gdb.base/endianity.c: New test.
* gdb.base/endianity.exp: New file.
Change-Id: I4bd98c1b4508c2d7c5a5dbb15d7b7b1cb4e667e2
|
||
|
Simon Marchi
|
f18ad8a16b |
Remove unused includes in infcmd.c and infrun.c
include-what-you-use reported this: ../../../src/binutils-gdb/gdb/infcmd.c should remove these lines: - #include <signal.h> // lines 22-22 - #include "cli/cli-decode.h" // lines 48-48 - #include "cli/cli-utils.h" // lines 56-56 - #include "event-top.h" // lines 38-38 - #include "infcall.h" // lines 57-57 - #include "parser-defs.h" // lines 39-39 ../../../src/binutils-gdb/gdb/infrun.c should remove these lines: - #include <signal.h> // lines 37-37 - #include "cli/cli-script.h" // lines 31-31 - #include "continuations.h" // lines 54-54 - #include "dictionary.h" // lines 45-45 - #include "gdbsupport/gdb_wait.h" // lines 28-28 - #include "interps.h" // lines 55-55 Remove those includes. Tested by rebuilding, and by quick inspection that the include fields were indeed unnecessary. gdb/ChangeLog: * infcmd.c: Remove includes. * infrun.c: Remove includes. Change-Id: I5e25af54ecd2235960c4127add8f604ddbb19153 |
||
|
Tom de Vries
|
85102364b2 |
[gdb] Fix more typos in comments
Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-18 Tom de Vries <tdevries@suse.de> * aarch64-tdep.c: Fix typos in comments. * ada-lang.c: Same. * ada-tasks.c: Same. * alpha-tdep.c: Same. * alpha-tdep.h: Same. * amd64-nat.c: Same. * amd64-windows-tdep.c: Same. * arc-tdep.c: Same. * arc-tdep.h: Same. * arch-utils.c: Same. * arm-nbsd-tdep.c: Same. * arm-tdep.c: Same. * ax-gdb.c: Same. * blockframe.c: Same. * btrace.c: Same. * c-varobj.c: Same. * coff-pe-read.c: Same. * coffread.c: Same. * cris-tdep.c: Same. * darwin-nat.c: Same. * dbxread.c: Same. * dcache.c: Same. * disasm.c: Same. * dtrace-probe.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame-tailcall.c: Same. * dwarf2-frame.c: Same. * dwarf2read.c: Same. * eval.c: Same. * exceptions.c: Same. * fbsd-tdep.c: Same. * findvar.c: Same. * frame.c: Same. * frv-tdep.c: Same. * gnu-v3-abi.c: Same. * go32-nat.c: Same. * h8300-tdep.c: Same. * hppa-tdep.c: Same. * i386-linux-tdep.c: Same. * i386-tdep.c: Same. * ia64-libunwind-tdep.c: Same. * ia64-tdep.c: Same. * infcmd.c: Same. * infrun.c: Same. * linespec.c: Same. * linux-nat.c: Same. * linux-thread-db.c: Same. * machoread.c: Same. * mdebugread.c: Same. * mep-tdep.c: Same. * mn10300-tdep.c: Same. * namespace.c: Same. * objfiles.c: Same. * opencl-lang.c: Same. * or1k-tdep.c: Same. * osabi.c: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-sysv-tdep.c: Same. * printcmd.c: Same. * procfs.c: Same. * record-btrace.c: Same. * record-full.c: Same. * remote-fileio.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * s12z-tdep.c: Same. * score-tdep.c: Same. * ser-base.c: Same. * ser-go32.c: Same. * skip.c: Same. * sol-thread.c: Same. * solib-svr4.c: Same. * solib.c: Same. * source.c: Same. * sparc-nat.c: Same. * sparc-sol2-tdep.c: Same. * sparc-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * stack.c: Same. * symfile.c: Same. * symtab.c: Same. * target-descriptions.c: Same. * target-float.c: Same. * thread.c: Same. * utils.c: Same. * valops.c: Same. * valprint.c: Same. * value.c: Same. * varobj.c: Same. * windows-nat.c: Same. * xcoffread.c: Same. * xstormy16-tdep.c: Same. * xtensa-tdep.c: Same. Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4 |
||
|
Tom Tromey
|
80fd282641 |
Fix type of startup_with_shell in gdbserver
startup_with_shell was changed to be of "bool" type, but I noticed that the definition in gdbserver disagreed. This disagreement caused some regressions on a big-endian machine. This patch removes the redundant declaration and definition of startup_with_shell and ensures that such clashes will be diagnosed. This moves the declaration to common-inferior.h, and introduces a new common-inferior.c, as suggested by Pedro. gdb/ChangeLog 2019-10-02 Tom Tromey <tromey@adacore.com> * Makefile.in (COMMON_SFILES): Add common-inferior.c. * gdbsupport/common-inferior.c: New file. * infcmd.c (startup_with_shell): Don't define. * nat/fork-inferior.h (startup_with_shell): Don't declare. * gdbsupport/common-inferior.h (startup_with_shell): Declare. * inferior.h (startup_with_shell): Don't declare. gdb/gdbserver/ChangeLog 2019-10-02 Tom Tromey <tromey@adacore.com> * Makefile.in (SFILES): Add common-inferior.c. (OBS): Add common-inferior.o. * server.c (startup_with_shell): Don't define. |
||
|
Tom Tromey
|
7f6aba03b9 |
Introduce metadata style
This introduces a new "metadata" style and changes many places in gdb to use it. The idea here is to let the user distinguish gdb output from output that (conceptually at least) comes directly from the inferior. The newly-styled category includes text that gdb traditionally surrounds in "<...>", like "<unavailable>". I only added a single test for this. In many cases this output is difficult to test. Also, while developing this errors in the implementation of the new printf formats showed up as regressions. gdb/ChangeLog 2019-10-01 Tom Tromey <tom@tromey.com> * p-lang.c (pascal_printstr): Use metadata style. * value.c (show_convenience): Use metadata style. * valprint.c (valprint_check_validity, val_print_optimized_out) (val_print_not_saved, val_print_unavailable) (val_print_invalid_address, generic_val_print, val_print) (value_check_printable, val_print_array_elements): Use metadata style. * ui-out.h (class ui_out) <field_fmt>: New overload. <do_field_fmt>: Add style parameter. * ui-out.c (ui_out::field_fmt): New overload. * typeprint.c (type_print_unknown_return_type) (val_print_not_allocated, val_print_not_associated): Use metadata style. * tui/tui-out.h (class tui_ui_out) <do_field_fmt>: Add style parameter. * tui/tui-out.c (tui_ui_out::do_field_fmt): Update. * tracepoint.c (tvariables_info_1): Use metadata style. * stack.c (print_frame_arg, print_frame_info, print_frame) (info_frame_command_core): Use metadata style. * skip.c (info_skip_command): Use metadata style. * rust-lang.c (rust_print_enum): Use metadata style. * python/py-prettyprint.c (print_stack_unless_memory_error): Use metadata style. * python/py-framefilter.c (py_print_single_arg): Use metadata style. * printcmd.c (do_one_display, print_variable_and_value): Use metadata style. * p-valprint.c (pascal_val_print) (pascal_object_print_value_fields): Use metadata style. * p-typeprint.c (pascal_type_print_base): Use metadata style. * mi/mi-out.h (class mi_ui_out) <do_field_fmt>: Add style parameter. * mi/mi-out.c (mi_ui_out::do_field_fmt): Update. * m2-valprint.c (m2_print_long_set): Use metadata style. * m2-typeprint.c (m2_print_type): Use metadata style. * infcmd.c (print_return_value_1): Use metadata style. * gnu-v3-abi.c (print_one_vtable): Use metadata style. * f-valprint.c (info_common_command_for_block): Use metadata style. * f-typeprint.c (f_type_print_base): Use metadata style. * expprint.c (print_subexp_standard): Use metadata style. * cp-valprint.c (cp_print_value_fields): Use metadata style. * cli/cli-style.h (class cli_style_option): Add constructor. (metadata_style): Declare. * cli/cli-style.c (metadata_style): New global. (_initialize_cli_style): Register metadata style. * cli-out.h (class cli_ui_out) <do_field_fmt>: Add style parameter. * cli-out.c (cli_ui_out::do_field_fmt): Update. * c-typeprint.c (c_type_print_base_struct_union) (c_type_print_base_1): Use metadata style. * breakpoint.c (watchpoint_value_print) (print_one_breakpoint_location): Use metadata style. * break-catch-syscall.c (print_one_catch_syscall): Use metadata style. * break-catch-sig.c (signal_catchpoint_print_one): Use metadata style. * ada-valprint.c (val_print_packed_array_elements, printstr) (print_field_values, ada_val_print_ref, ada_val_print): Use metadata style. * ada-typeprint.c (print_array_type, ada_print_type): Use metadata style. * ada-tasks.c (print_ada_task_info, info_task): Use metadata style. * ada-lang.c (user_select_syms): Use metadata style. gdb/testsuite/ChangeLog 2019-10-01 Tom Tromey <tom@tromey.com> * lib/gdb-utils.exp (style): Handle "metadata" argument. * gdb.base/style.exp: Add metadata style test. |
||
|
Christian Biesinger
|
491144b5e2 |
Change boolean options to bool instead of int
This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise. |
||
|
Philippe Waroquiers
|
590042fc45 |
Make first and last lines of 'command help documentation' consistent.
With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise. |
||
|
Tom Tromey
|
268a13a5a3 |
Rename common to gdbsupport
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport. |
||
|
Tom Tromey
|
cafb34387d |
Remove unnecessary casts of NULL
I noticed some unnecessary casts of NULL. This removes all the unnecessary ones, leaving only ones where we must ensure that NULL has pointer type for passing through varargs. I removed a couple of useless casts of 0 that I noticed while writing this. Tested by rebuilding. gdb/ChangeLog 2019-06-16 Tom Tromey <tom@tromey.com> * valops.c (value_cast, value_slice): Remove unnecessary cast. * breakpoint.c (stopin_command, stopat_command) (until_break_command, decode_location_default): Remove unnecessary cast. * utils.c (subset_compare): Remove unnecessary cast. * ada-lang.c (ada_update_initial_language): Remove unnecessary cast. * linespec.c (decode_line_with_last_displayed): Remove unnecessary cast. * infcmd.c (path_command): Remove unnecessary cast. * coffread.c (decode_type): Remove unnecessary cast. * xcoffread.c (read_xcoff_symtab): Remove unnecessary cast. * mipsread.c (mipscoff_symfile_read): Remove unnecessary cast. * tui/tui-stack.c (tui_show_locator_content) (tui_show_frame_info): Remove unnecessary cast. * tui/tui-win.c (tui_scroll_forward_command) (tui_scroll_backward_command, tui_set_focus, tui_set_win_height) (parse_scrolling_args): Remove unnecessary cast. * tui/tui-data.c (init_win_info, tui_del_window) (tui_free_window, tui_del_data_windows, tui_free_data_content) (free_content_elements): Remove unnecessary cast. * tui/tui-windata.c (tui_first_data_item_displayed): Remove unnecessary cast. * tui/tui-source.c (tui_set_source_content) (tui_vertical_source_scroll): Remove unnecessary cast. * tui/tui-layout.c (tui_default_win_height): Remove unnecessary cast. * tui/tui-io.c (tui_initialize_io): Remove unnecessary cast. * tui/tui-regs.c (tui_display_registers_from) (tui_display_register): Remove unnecessary cast. * tui/tui-wingeneral.c (tui_refresh_win, tui_delete_win) (tui_unhighlight_win, tui_highlight_win, tui_make_window) (make_visible): Remove unnecessary cast. * tui/tui-winsource.c (tui_erase_source_content) (tui_update_breakpoint_info, tui_set_exec_info_content): Remove unnecessary cast. * ax-gdb.c (agent_command_1): Remove unnecessary cast. * cli/cli-setshow.c (cmd_show_list): Remove unnecessary cast. * stabsread.c (read_type, read_array_type, read_range_type): Remove unnecessary cast. * mdebugread.c (mdebug_build_psymtabs): Remove unnecessary cast. (parse_symbol, parse_type, upgrade_type, parse_external) (parse_partial_symbols, psymtab_to_symtab_1, cross_ref): Remove unnecessary cast. * gdb_bfd.c (gdb_bfd_map_section): Remove unnecessary cast. |
||
|
Tom Tromey
|
89549d7f4d |
Remove trailing newlines from help text
I noticed recently that some command had a trailing newline in its "help" output. So, I temporarily hacked cli-decode.c to print something when a new command was installed that had a trailing newline in its help message, and wrote this patch, which removes all the ones I could find this way. (There could still be a few more in *-nat files.) Tested on x86-64 Fedora 29. gdb/ChangeLog 2019-06-11 Tom Tromey <tromey@adacore.com> * infcall.c (_initialize_infcall): Remove trailing newline from help. * user-regs.c (_initialize_user_regs): Remove trailing newline from help. * typeprint.c (_initialize_typeprint): Remove trailing newline from help. * reverse.c (_initialize_reverse): Remove trailing newlines from help. * tracepoint.c (_initialize_tracepoint): Remove trailing newlines from help. * language.c (add_set_language_command): Remove trailing newline from help. * infcmd.c (_initialize_infcmd): Remove trailing newlines from help. * disasm.c (_initialize_disasm): Remove trailing newline from help. * top.c (init_main): Remove trailing newline from help. * interps.c (_initialize_interpreter): Remove trailing newline from help. * btrace.c (_initialize_btrace): Remove trailing newlines from help. * breakpoint.c (_initialize_breakpoint): Remove trailing newline from help. * python/python.c (_initialize_python): Remove trailing newline from help. * spu-tdep.c (_initialize_spu_tdep): Remove trailing newlines from help. * tui/tui-win.c (_initialize_tui_win): Remove trailing newlines from help. Reformat some text. * tui/tui-stack.c (_initialize_tui_stack): Remove trailing newline from help. * tui/tui-layout.c (_initialize_tui_layout): Remove trailing newline from help. |
||
|
Pedro Alves
|
b02f78f928 |
Introduce and use make_unique_xstrdup
Adds an utility function to make it shorter to write the common case of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it throughout. Note: I tried to put this in common/common-utils.h near skip_spaces, etc. but that is included in common/common-defs.h before common/gdb_unique_ptr.h is included, so it would fail to compile because gdb::unique_xmalloc_ptr isn't defined at that point yet. I tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but that doesn't work because gdb_unique_ptr.h depends on common-utils.h for xfree. gdb/ChangeLog: 2019-06-04 Pedro Alves <palves@redhat.com> * common/gdb_unique_ptr.h (make_unique_xstrdup): New. * ada-lang.c (catch_ada_completer): Use make_unique_xstrdup. * breakpoint.c (condition_completer): Likewise. * cli/cli-dump.c (scan_expression): Likewise. * common/filestuff.c (mkdir_recursive): Likewise. * common/gdb_tilde_expand.c (gdb_tilde_expand_up) * common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile) (gdb_abspath): Likewise. * compile/compile-cplus-types.c (compile_cplus_instance::decl_name): Likewise. * completer.c (complete_explicit_location): (signal_completer, reg_or_group_completer_1): Likewise. * cp-support.c (cp_remove_params_if_any): Likewise. * fbsd-tdep.c (fbsd_core_vnode_path): Likewise. * guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise. * infcmd.c (strip_bg_char): Likewise. * linespec.c (copy_token_string): Likewise. * mi/mi-main.c (output_cores): Likewise. * psymtab.c (psymtab_search_name): * symfile.c (test_set_ext_lang_command): Likewise. * target.c (target_fileio_read_stralloc): Likewise. * tui/tui-regs.c (tui_reggroup_completer): Likewise. * value.c (complete_internalvar): Likewise. gdb/gdbserver/ChangeLog: 2019-06-04 Pedro Alves <palves@redhat.com> * server.c (captured_main): Use make_unique_xstrdup. |
||
|
Tom Tromey
|
000439d528 |
Add "set print finish"
A user wanted to be able to disable the display of the value when using "finish" -- but still have the value entered into the value history in case it was useful later on. Part of the rationale here is that sometimes the value might be quite large, or expensive to display (in their case this was compounded by a rogue pretty-printer). This patch implements this idea. gdb/ChangeLog 2019-05-29 Tom Tromey <tromey@adacore.com> * NEWS: Add entry. * infcmd.c (print_return_value_1): Handle finish_print option. (show_print_finish): New function. (_initialize_infcmd): Add "set/show print finish" commands. * valprint.c (user_print_options): Initialize new member. * valprint.h (struct value_print_options) <finish_print>: New member. gdb/doc/ChangeLog 2019-05-29 Tom Tromey <tromey@adacore.com> * gdb.texinfo (Continuing and Stepping): Document new commands. gdb/testsuite/ChangeLog 2019-05-29 Tom Tromey <tromey@adacore.com> * gdb.base/finish.exp (finish_no_print): New proc. (finish_tests): Call it. |
||
|
Simon Marchi
|
e242fd1249 |
Use -qualified flag when setting temporary breakpoint in start command
When using the "start" command, GDB puts a temporary breakpoint on the "main" symbol (we literally invoke the tbreak command). However, since it does wild matching by default, it also puts a breakpoint on any C++ method or "main" function in a namespace. For example, when debugging GDB, it creates a total of 24 locations: (gdb) start Temporary breakpoint 1 at 0x198c1e9: main. (24 locations) as there are a bunch of methods called main in the selftests, such as selftests::string_view::capacity_1::main() If such method was called in the constructor of a global object, or a function marked with the attribute "constructor", then we would stop at the wrong place. Also, this causes a few extra symtabs (those that contain the "wrong" mains) to be expanded for nothing. The dummiest, most straightforward solution is to add -qualified when invoking tbreak. With this patch, "start" creates a single-location breakpoint, as expected. I copied the start.exp test to start-cpp.exp and made it use a C++ test file, which contains two main functions. The new test verifies that the output of "start" is the output we get when we set a single-location breakpoint. gdb/ChangeLog: * infcmd.c (run_command_1): Pass -qualified to tbreak when usind the "start" command. gdb/testsuite/ChangeLog: * gdb.base/start-cpp.exp: New file. * gdb.base/start-cpp.cc: New file. |
||
|
Tom Tromey
|
eedc3f4f0a |
Replace throw_exception with throw in some cases
This replaces throw_exception with "throw;" when possible. This was
written by script. The rule that is followed is that uses of the
form:
catch (... &name)
{
...
throw_exception (name);
}
... can be rewritten. This should always be safe, because exceptions
are caught by const reference, and therefore can't be modified in the
body of the catch.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* valops.c (value_rtti_indirect_type): Replace throw_exception
with throw.
* tracefile-tfile.c (tfile_target_open): Replace throw_exception
with throw.
* thread.c (thr_try_catch_cmd): Replace throw_exception with
throw.
* target.c (target_translate_tls_address): Replace throw_exception
with throw.
* stack.c (frame_apply_command_count): Replace throw_exception
with throw.
* solib-spu.c (append_ocl_sos): Replace throw_exception with
throw.
* s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception
with throw.
* rs6000-tdep.c (rs6000_frame_cache)
(rs6000_epilogue_frame_cache): Replace throw_exception with throw.
* remote.c: Replace throw_exception with throw.
* record-full.c (record_full_message, record_full_wait_1)
(record_full_restore): Replace throw_exception with throw.
* record-btrace.c:
(get_thread_current_frame_id, record_btrace_start_replaying)
(cmd_record_btrace_bts_start, cmd_record_btrace_pt_start)
(cmd_record_btrace_start): Replace throw_exception with throw.
* parse.c (parse_exp_in_context_1): Replace throw_exception with
throw.
* linux-nat.c (detach_one_lwp, linux_resume_one_lwp)
(resume_stopped_resumed_lwps): Replace throw_exception with throw.
* linespec.c:
(find_linespec_symbols): Replace throw_exception with throw.
* infrun.c (displaced_step_prepare, resume): Replace
throw_exception with throw.
* infcmd.c (post_create_inferior): Replace throw_exception with
throw.
* inf-loop.c (inferior_event_handler): Replace throw_exception
with throw.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Replace throw_exception with throw.
* frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle)
(get_prev_frame_always, get_frame_pc_if_available)
(get_frame_address_in_block_if_available, get_frame_language):
Replace throw_exception with throw.
* frame-unwind.c (frame_unwind_try_unwinder): Replace
throw_exception with throw.
* eval.c (fetch_subexp_value, evaluate_var_value)
(evaluate_funcall, evaluate_subexp_standard): Replace
throw_exception with throw.
* dwarf2loc.c (call_site_find_chain)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval):
Replace throw_exception with throw.
* dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception
with throw.
* darwin-nat.c (darwin_attach_pid): Replace throw_exception with
throw.
* cp-abi.c (baseclass_offset): Replace throw_exception with throw.
* completer.c (complete_line_internal): Replace throw_exception
with throw.
* compile/compile-object-run.c (compile_object_run): Replace
throw_exception with throw.
* cli/cli-script.c (process_next_line): Replace throw_exception
with throw.
* btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace)
(btrace_enable, btrace_maint_update_pt_packets): Replace
throw_exception with throw.
* breakpoint.c (create_breakpoint, save_breakpoints): Replace
throw_exception with throw.
* break-catch-throw.c (re_set_exception_catchpoint): Replace
throw_exception with throw.
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Replace throw_exception with throw.
* aarch64-tdep.c (aarch64_make_prologue_cache)
(aarch64_make_stub_cache): Replace throw_exception with throw.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_detach_one_lwp): Replace throw_exception with
throw.
(linux_resume_one_lwp): Likewise.
|
||
|
Tom Tromey
|
230d2906b9 |
Rename gdb exception types
This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update. |
||
|
Tom Tromey
|
a70b814420 |
Rewrite TRY/CATCH
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling. |
||
|
Tom Tromey
|
46e3ed7ff9 |
C++-ify struct thread_fsm
This C++-ifies struct thread_fsm, replacing the "ops" structure with virtual methods, and changing all the implementations to derive from thread_fsm. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * thread.c (thread_cancel_execution_command): Update. * thread-fsm.h (struct thread_fsm): Add constructor, destructor, methods. (struct thread_fsm_ops): Remove. (thread_fsm_ctor, thread_fsm_delete, thread_fsm_clean_up) (thread_fsm_should_stop, thread_fsm_return_value) (thread_fsm_set_finished, thread_fsm_finished_p) (thread_fsm_async_reply_reason, thread_fsm_should_notify_stop): Don't declare. * mi/mi-interp.c (mi_on_normal_stop_1): Update. * infrun.c (clear_proceed_status_thread) (clean_up_just_stopped_threads_fsms, fetch_inferior_event) (print_stop_event): Update. * infcmd.c (struct step_command_fsm): Inherit from thread_fsm. Add constructor. (step_command_fsm_ops): Remove. (new_step_command_fsm): Remove. (step_1): Update. (step_command_fsm::should_stop): Rename from step_command_fsm_should_stop. (step_command_fsm::clean_up): Rename from step_command_fsm_clean_up. (step_command_fsm::do_async_reply_reason): Rename from step_command_fsm_async_reply_reason. (struct until_next_fsm): Inherit from thread_fsm. Add constructor. (until_next_fsm_ops): Remove. (new_until_next_fsm): Remove. (until_next_fsm::should_stop): Rename from until_next_fsm_should_stop. (until_next_fsm::clean_up): Rename from until_next_fsm_clean_up. (until_next_fsm::do_async_reply_reason): Rename from until_next_fsm_async_reply_reason. (struct finish_command_fsm): Inherit from thread_fsm. Add constructor. Change type of breakpoint. (finish_command_fsm_ops): Remove. (new_finish_command_fsm): Remove. (finish_command_fsm::should_stop): Rename from finish_command_fsm_should_stop. (finish_command_fsm::clean_up): Rename from finish_command_fsm_clean_up. (finish_command_fsm::return_value): Rename from finish_command_fsm_return_value. (finish_command_fsm::do_async_reply_reason): Rename from finish_command_fsm_async_reply_reason. (finish_command): Update. * infcall.c (struct call_thread_fsm): Inherit from thread_fsm. Add constructor. (call_thread_fsm_ops): Remove. (call_thread_fsm::call_thread_fsm): Rename from new_call_thread_fsm. (call_thread_fsm::should_stop): Rename from call_thread_fsm_should_stop. (call_thread_fsm::should_notify_stop): Rename from call_thread_fsm_should_notify_stop. (run_inferior_call, call_function_by_hand_dummy): Update. * cli/cli-interp.c (should_print_stop_to_console): Update. * breakpoint.c (struct until_break_fsm): Inherit from thread_fsm. Add constructor. Change type of location_breakpoint, caller_breakpoint. (until_break_fsm_ops): Remove. (new_until_break_fsm): Remove. (until_break_fsm::should_stop): Rename from until_break_fsm_should_stop. (until_break_fsm::clean_up): Rename from until_break_fsm_clean_up. (until_break_fsm::do_async_reply_reason): Rename from until_break_fsm_async_reply_reason. (until_break_command): Update. * thread-fsm.c: Remove. * Makefile.in (COMMON_SFILES): Remove thread-fsm.c. |
||
|
Tom Tromey
|
0747795c08 |
Normalize includes to use common/
This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes. |
||
|
Tom Tromey
|
5419bdae55 |
Replace delete_longjmp_breakpoint_cleanup with a forward_scope_exit type
This removes delete_longjmp_breakpoint_cleanup in favor of forward_scope_exit. gdb/ChangeLog: 2019-01-23 Tom Tromey <tom@tromey.com> Andrew Burgess <andrew.burgess@embecosm.com> Pedro Alves <palves@redhat.com> * breakpoint.c (until_break_command): Use delete_longjmp_breakpoint_cleanup class. * infcmd.c (delete_longjmp_breakpoint_cleanup): Remove function. (until_next_command): Use delete_longjmp_breakpoint_cleanup class. * inferior.h: Include forward-scope-exit.h. (delete_longjmp_breakpoint_cleanup): Replace function declaration with FORWARD_SCOPE_EXIT type. |
||
|
Tom Tromey
|
f097f5ad80 |
Fix crash in "finish"
PR gdb/28155 notes a crash in "finish" that occurs with a particular source file compiled by clang. The bug is the typical gdb problem of a missing call to check_typedef. clang emits a function whose return type is a typedef to void. get_return_value asserts that the return type is not void, but the callers were not using check_typedef first. gdb/ChangeLog 2019-01-06 Tom Tromey <tom@tromey.com> PR gdb/28155: * python/py-finishbreakpoint.c (bpfinishpy_init): Use check_typedef. * infcmd.c (finish_command_fsm_should_stop): Use check_typedef. (print_return_value): Likewise. gdb/testsuite/ChangeLog 2019-01-06 Tom Tromey <tom@tromey.com> PR gdb/28155: * gdb.dwarf2/typedef-void-finish.exp: New file. |
||
|
Joel Brobecker
|
42a4f53d2b |
Update copyright year range in all GDB files.
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files. |
||
|
Pedro Alves
|
0803633106 |
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
|
||
Simon Marchi
|
f6efe3f842 |
Introduce gdbarch_num_cooked_regs
The expression gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch) is used quite often to find the number of cooked registers (raw + pseudo registers). This patch introduces gdbarch_num_cooked_regs, which does the equivalent. It substantially reduces required wrapping in some places, so should improve readability. There is a for loop in m68hc11_frame_unwind_cache that had iterated until (the equivalent of) gdbarch_num_cooked_regs (gdbarch) - 1. During review, we concluded that this is most likely an off-by-one mistake, so I replaced it with gdbarch_num_cooked_regs (gdbarch). gdb/ChangeLog: * gdbarch.sh (gdbarch_num_cooked_regs): New. * gdbarch.h: Re-generate. * ax-gdb.c (gen_expr): Use gdbarch_num_cooked_regs. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * findvar.c (value_of_register): Likewise. (value_of_register_lazy): Likewise. (address_from_register): Likewise. * frame.c (get_frame_register_bytes): Likewise. * gdbarch-selftests.c (register_to_value_test): Likewise. * h8300-tdep.c (h8300_register_type): Likewise. * i386-tdep.c (i386_dbx_reg_to_regnum): Likewise. (i386_svr4_reg_to_regnum): Likewise. * infcmd.c (default_print_registers_info): Likewise. (registers_info): Likewise. (print_vector_info): Likewise. (default_print_float_info): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mdebugread.c (mdebug_reg_to_regnum): Likewise. * mi/mi-main.c (mi_cmd_data_list_register_names): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_list_register_values): Likewise. (mi_cmd_data_write_register_values): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mips-tdep.c (print_gp_register_row): Likewise. (mips_print_registers_info): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * regcache.c (init_regcache_descr): Likewise. (register_size): Likewise. (register_dump::dump): Likewise. (cooked_read_test): Likewise. (cooked_write_test): Likewise. * rs6000-tdep.c (rs6000_register_sim_regno): Likewise. (rs6000_gdbarch_init): Likewise. * stabsread.c (stab_reg_to_regnum): Likewise. * stack.c (info_frame_command): Likewise. * target-descriptions.c (tdesc_register_name): Likewise. * trad-frame.c (trad_frame_alloc_saved_regs): Likewise. * tui/tui-regs.c (tui_show_register_group): Likewise. * user-regs.c (user_reg_map_name_to_regnum): Likewise. (user_reg_map_regnum_to_name): Likewise. (value_of_user_reg): Likewise. (maintenance_print_user_registers): Likewise. * xtensa-tdep.c (xtensa_find_register_by_name): Likewise. (xtensa_register_name): Likewise. (xtensa_register_type): Likewise. (xtensa_reg_to_regnum): Likewise. (xtensa_pseudo_register_read): Likewise. (xtensa_pseudo_register_write): Likewise. |
||
John Baldwin
|
73f1bd769a |
Make the "info proc" documentation more consistent.
Remove "running" in a few places since "info proc" can be used with core dumps as well as running processes on both Linux and FreeBSD. Use "the specified process" in the description of most "info proc" subcommands. Use "additional information" instead of "/proc process information" in the "info proc" description to more closely match the language in the manual. gdb/ChangeLog: * infcmd.c (_initialize_infcmd): Remove "running" from "info proc" description. Make "info proc" command descriptions more consistent. gdb/doc/ChangeLog: * gdb.texinfo (info proc): Remove "running". (info proc mappings): Replace "program" with "process". |
||
|
John Baldwin
|
e98ee8c458 |
Add a new 'info proc files' subcommand of 'info proc'.
This command displays a list of open file descriptors. gdb/ChangeLog: * defs.h (enum info_proc_what) [IP_FILES]: New value. * infcmd.c (info_proc_cmd_files): New function. (_initialize_infcmd): Register 'info proc files' command. |
||
|
Tom Tromey
|
cbaaa0cafc |
Change get_inferior_args to return const char *
I noticed that get_inferior_args should return const char *, because it is just returning a reference to something owned by the inferior. I'm checking this in. gdb/ChangeLog 2018-09-15 Tom Tromey <tom@tromey.com> * infcmd.c (get_inferior_args): Return const char *. * inferior.h (get_inferior_args): Return type now const. * linux-tdep.c (linux_fill_prpsinfo): Update. * procfs.c (procfs_target::make_corefile_notes): Update. |
||
Kevin Buettner
|
2b1ffcfd6f |
Use BLOCK_ENTRY_PC in place of most uses of BLOCK_START
This change/patch substitues BLOCK_ENTRY_PC for BLOCK_START in places where BLOCK_START is used to obtain the address at which execution should enter the block. Since blocks can now contain non-contiguous ranges, the BLOCK_START - which is still be the very lowest address in the block - might not be the same as BLOCK_ENTRY_PC. There is a change to infrun.c which is less obvious and less mechanical. I'm posting it as a separate patch. gdb/ChangeLog: * ax-gdb.c (gen_var_ref): Use BLOCK_ENTRY_PC in place of BLOCK_START. * blockframe.c (get_pc_function_start): Likewise. * compile/compile-c-symbols.c (convert_one_symbol): Likewise. (gcc_symbol_address): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (get_expr_block_and_pc): Likewise. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. (func_addr_to_tail_call_list): Likewise. * findvar.c (default_read_var_value): Likewise. * inline-frame.c (inline_frame_this_id): Likewise. (skip-inline_frames): Likewise. * infcmd.c (until_next_command): Likewise. * linespec.c (convert_linespec_to_sals): Likewise. * parse.c (parse_exp_in_context_1): Likewise. * printcmd.c (build_address_symbolic): likewise. (info_address_command): Likewise. symtab.c (find_function_start_sal): Likewise. (skip_prologue_sal): Likewise. (find_function_alias_target): Likewise. (find_gnu_ifunc): Likewise. * stack.c (find_frame_funname): Likewise. * symtab.c (fixup_symbol_section): Likewise. (find_function_start_sal): Likewise. (skip_prologue_sal): Likewsie. (find_function_alias_target): Likewise. (find_gnu_ifunc): Likewise. * tracepoint.c (info_scope_command): Likewise. * value.c (value_fn_field): Likewise. |
||
|
Tom de Vries
|
9e7f3bbbbf |
[gdb/breakpoints] Fix sigsegv in info prog at exec catchpoint
With the test-case contained in this patch and compiled for debug we run into a segfault with trunk gdb: ... $ gdb catch-follow-exec -batch -ex "catch exec" \ -ex "set follow-exec-mode new" -ex "run" -ex "info prog" Catchpoint 1 (exec) process xxx is executing new program: /usr/bin/ls [New inferior 2 (process 0)] [New process xxx] Thread 2.1 "ls" hit Catchpoint 1 (exec'd /usr/bin/ls), in _start () from /lib64/ld-linux-x86-64.so.2 Segmentation fault (core dumped) ... The patch fixes the segfault by returning an error in info_program_command if get_last_target_status returns minus_one_ptid. The test-case is non-standard, because the standard approach runs into PR23368, a problem with gdb going to the background. Build and reg-tested on x86_64-linux. 2018-07-26 Tom de Vries <tdevries@suse.de> PR breakpoints/23366 * infcmd.c (info_program_command): Handle ptid == minus_one_ptid. * gdb.base/catch-follow-exec.c: New test. * gdb.base/catch-follow-exec.exp: New file. |
||
|
Tom Tromey
|
d7e15655a4 |
Remove ptid_equal
Remove ptid_equal in favor of using "==". gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_equal): Remove. * common/ptid.h (ptid_equal): Don't declare. * ada-tasks.c: Update. * breakpoint.c: Update. * common/agent.c: Update. * corelow.c: Update. * darwin-nat-info.c: Update. * darwin-nat.c: Update. * dcache.c: Update. * dtrace-probe.c: Update. * dummy-frame.c: Update. * fbsd-nat.c: Update. * frame.c: Update. * gdbthread.h: Update. * gnu-nat.c: Update. * go32-nat.c: Update. * inf-loop.c: Update. * inf-ptrace.c: Update. * infcall.c: Update. * infcmd.c: Update. * inflow.c: Update. * infrun.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-thread-db.c: Update. * mi/mi-cmd-var.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * nto-procfs.c: Update. * ppc-linux-tdep.c: Update. * procfs.c: Update. * python/py-inferior.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * ravenscar-thread.c: Update. * regcache.c: Update. * remote-sim.c: Update. * remote.c: Update. * sol-thread.c: Update. * solib.c: Update. * target.c: Update. * tui/tui-stack.c: Update. * varobj.c: Update. * windows-nat.c: Update. * windows-tdep.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * linux-low.c: Update. * lynx-low.c: Update. * mem-break.c: Update. * nto-low.c: Update. * remote-utils.c: Update. * server.c: Update. * spu-low.c: Update. * target.c: Update. * win32-low.c: Update. |
||
|
Tom Tromey
|
26a57c9256 |
Remove ptid_match
This removes ptid_match in favor of the ptid_t::matches method. gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_match): Remove. * common/ptid.h (ptid_match): Don't declare. * fbsd-nat.c: Update. * infcmd.c: Update. * infrun.c: Update. * linux-nat.c: Update. * record-btrace.c: Update. * regcache.c: Update. * remote.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * server.c: Update. |
||
|
Tom Tromey
|
e99b03dcf4 |
Remove ptid_get_pid
This removes ptid_get_pid in favor of calling the ptid_t::pid method. gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_get_pid): Remove. * common/ptid.h (ptid_get_pid): Don't declare. * aarch64-linux-nat.c: Update. * ada-lang.c: Update. * aix-thread.c: Update. * alpha-bsd-nat.c: Update. * amd64-fbsd-nat.c: Update. * amd64-linux-nat.c: Update. * arm-linux-nat.c: Update. * arm-nbsd-nat.c: Update. * auxv.c: Update. * break-catch-syscall.c: Update. * breakpoint.c: Update. * bsd-uthread.c: Update. * corelow.c: Update. * ctf.c: Update. * darwin-nat.c: Update. * fbsd-nat.c: Update. * fbsd-tdep.c: Update. * gcore.c: Update. * gnu-nat.c: Update. * hppa-nbsd-nat.c: Update. * hppa-obsd-nat.c: Update. * i386-fbsd-nat.c: Update. * ia64-linux-nat.c: Update. * inf-ptrace.c: Update. * infcmd.c: Update. * inferior.c: Update. * inferior.h: Update. * inflow.c: Update. * infrun.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * m68k-bsd-nat.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * mips-linux-nat.c: Update. * mips-nbsd-nat.c: Update. * mips64-obsd-nat.c: Update. * nat/aarch64-linux-hw-point.c: Update. * nat/aarch64-linux.c: Update. * nat/linux-btrace.c: Update. * nat/linux-osdata.c: Update. * nat/linux-procfs.c: Update. * nat/x86-linux-dregs.c: Update. * nto-procfs.c: Update. * obsd-nat.c: Update. * ppc-linux-nat.c: Update. * ppc-nbsd-nat.c: Update. * ppc-obsd-nat.c: Update. * proc-service.c: Update. * procfs.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * ravenscar-thread.c: Update. * record.c: Update. * remote-sim.c: Update. * remote.c: Update. * rs6000-nat.c: Update. * s390-linux-nat.c: Update. * sh-nbsd-nat.c: Update. * sol-thread.c: Update. * sparc-nat.c: Update. * sparc64-tdep.c: Update. * spu-linux-nat.c: Update. * spu-tdep.c: Update. * target-debug.h: Update. * target.c: Update. * thread.c: Update. * tid-parse.c: Update. * tracefile-tfile.c: Update. * vax-bsd-nat.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * x86-nat.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * linux-low.c: Update. * linux-mips-low.c: Update. * lynx-low.c: Update. * mem-break.c: Update. * nto-low.c: Update. * remote-utils.c: Update. * server.c: Update. * spu-low.c: Update. * target.c: Update. * tracepoint.c: Update. |
||
|
Tom Tromey
|
f2907e4991 |
Remove pid_to_ptid
This removes pid_to_ptid in favor of calling the ptid_t constructor directly. gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (pid_to_ptid): Remove. * common/ptid.h (pid_to_ptid): Don't declare. * aix-thread.c: Update. * arm-linux-nat.c: Update. * common/ptid.c: Update. * common/ptid.h: Update. * corelow.c: Update. * ctf.c: Update. * darwin-nat.c: Update. * fbsd-nat.c: Update. * fork-child.c: Update. * gnu-nat.c: Update. * go32-nat.c: Update. * inf-ptrace.c: Update. * infcmd.c: Update. * inferior.c: Update. * infrun.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * nat/aarch64-linux-hw-point.c: Update. * nat/fork-inferior.c: Update. * nat/x86-linux-dregs.c: Update. * nto-procfs.c: Update. * obsd-nat.c: Update. * procfs.c: Update. * progspace.c: Update. * remote.c: Update. * rs6000-nat.c: Update. * s390-linux-nat.c: Update. * sol-thread.c: Update. * spu-linux-nat.c: Update. * target.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * windows-nat.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * linux-low.c: Update. * linux-ppc-low.c: Update. * linux-x86-low.c: Update. * proc-service.c: Update. * server.c: Update. * spu-low.c: Update. * thread-db.c: Update. * win32-low.c: Update. |
||
|
Pedro Alves
|
f2ffa92bbc |
gdb: Eliminate the 'stop_pc' global
In my multi-target work, I need to add a few more scoped_restore_current_thread and switch_to_thread calls in some places, and in some lower-level places I was fighting against the fact that switch_to_thread reads/refreshes the stop_pc global. Instead of piling on workarounds, let's just finally eliminate the stop_pc global. We already have the per-thread thread_info->suspend.stop_pc field, so it's mainly a matter of using that more/instead. gdb/ChangeLog: 2018-06-28 Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_suspend_state) <stop_pc>: Extend comments. (switch_to_thread_no_regs): Adjust comment. * infcmd.c (stop_pc): Delete. (post_create_inferior, info_program_command): Replace references to stop_pc with references to thread_info->suspend.stop_pc. * inferior.h (stop_pc): Delete declaration. * infrun.c (proceed, handle_syscall_event, fill_in_stop_func) (handle_inferior_event_1, handle_signal_stop) (process_event_stop_test, keep_going_stepped_thread) (handle_step_into_function, handle_step_into_function_backward) (print_stop_location): Replace references to stop_pc with references to thread_info->suspend.stop_pc. (struct infcall_suspend_state) <stop_pc>: Delete field. (save_infcall_suspend_state, restore_infcall_suspend_state): Remove references to inf_stat->stop_pc. * linux-fork.c (fork_load_infrun_state): Likewise. * record-btrace.c (record_btrace_set_replay): Likewise. * record-full.c (record_full_goto_entry): Likewise. * remote.c (print_one_stopped_thread): Likewise. * target.c (target_resume): Extend comment. * thread.c (set_executing_thread): New. (set_executing): Use it. (switch_to_thread_no_regs, switch_to_no_thread, switch_to_thread): Remove references to stop_pc. |
||
|
Pedro Alves
|
00431a78b2 |
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid. |
||
|
Tom de Vries
|
5d9a060879 |
[gdb/cli] Honour 'print pretty' when printing result of finish command
Consider this testcase:
...
struct s {
int a;
int b;
};
struct s foo ()
{
struct s r;
r.a = 1;
r.b = 2;
return r;
}
int
main (void)
{
struct s v;
v = foo ();
return v.a + v.b;
}
...
When we compile it with -g, load the exec with gdb, and run till the end of foo,
we can print r:
...
(gdb) p r
$1 = {a = 1, b = 2}
...
and by setting pretty printing to on, we can get the fields of r printed each
on its own line:
...
(gdb) set print pretty
(gdb) p r
$2 = {
a = 1,
b = 2
}
...
However, when we finish foo, the printed function result value is not using
the pretty printing setting:
...
(gdb) finish
Run till exit from #0 foo () at test.c:11
0x00000000004004c1 in main () at test.c:18
18 v = foo ();
Value returned is $3 = {a = 1, b = 2}
...
This patch fixes that by using get_user_print_options instead of
get_no_prettyformat_print_options in print_return_value_1, which gives us:
...
(gdb) finish
Run till exit from #0 foo () at test.c:11
0x00000000004004c1 in main () at test.c:18
18 v = foo ();
Value returned is $2 = {
a = 1,
b = 2
}
...
Build & reg-tested on x86_64.
2018-06-14 Tom de Vries <tdevries@suse.de>
PR cli/22573
* infcmd.c (print_return_value_1): Use get_user_print_options instead of
get_no_prettyformat_print_options.
* gdb.base/finish-pretty.c: New test.
* gdb.base/finish-pretty.exp: New file.
|
||
|
Pedro Alves
|
8b88a78e63 |
target_stack -> current_top_target() throughout
The recent C++ification of target_ops replaced references to the old "current_target" squashed target throughout with references to a "target_stack" pointer. I had picked the "target_stack" name very early in the multi-target work, and managed to stick with it, even though it's a bit of a misnomer, since it isn't really a "target stack" object, but a pointer into the current top target in the stack. As I'm splitting more pieces off of the multi-target branch, I've come to think that it's better to rename it now. A following patch will introduce a new class to represent a target stack, and "target_stack" would be _its_ ideal name. (In the branch, the class is called a_target_stack to work around the clash.) Thus this commit renames target_stack to current_top_target and replaces all references throughout. Also, while at it, current_top_target is made a function instead of a pointer, to make it possible to change its internal implementation without leaking implementation details out. In a couple patches, the implementation of the function will change to refer to a target stack object, and then further down the multi-target work, it'll change again to find the right target stack for the current inferior. gdb/ChangeLog: 2018-06-07 Pedro Alves <palves@redhat.com> * target.h (target_stack): Delete. (current_top_target): Declare function. * target.c (target_stack): Delete. (g_current_top_target): New. (current_top_target): New function. * auxv.c: Use current_top_target instead of target_stack throughout. * avr-tdep.c: Likewise. * breakpoint.c: Likewise. * corefile.c: Likewise. * elfread.c: Likewise. * eval.c: Likewise. * exceptions.c: Likewise. * frame.c: Likewise. * gdbarch-selftests.c: Likewise. * gnu-v3-abi.c: Likewise. * ia64-tdep.c: Likewise. * ia64-vms-tdep.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * linespec.c: Likewise. * linux-tdep.c: Likewise. * minsyms.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-linux-tdep.c: Likewise. * procfs.c: Likewise. * regcache.c: Likewise. * remote.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-nat.c: Likewise. * s390-tdep.c: Likewise. * solib-aix.c: Likewise. * solib-darwin.c: Likewise. * solib-dsbt.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * solib-target.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * spu-tdep.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * target.h: Likewise. * tracefile-tfile.c: Likewise. * tracepoint.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * windows-tdep.c: Likewise. * mi/mi-main.c: Likewise. |
||
|
Tom Tromey
|
0a8ba311d0 |
Update help text for "jump" command
This updates the usage text for the "jump" command to conform to the GNU style. 2018-04-29 Tom Tromey <tom@tromey.com> * infcmd.c (_initialize_infcmd): Update help text. |
||
|
Pedro Alves
|
f6ac5f3d63 |
Convert struct target_ops to C++
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
||
|
Pedro Alves
|
249b573352 |
Fix new inferior events output
Since
|
||
Sergio Durigan Junior
|
f67c0c9171 |
Enable 'set print inferior-events' and improve detach/fork/kill/exit messages
This patch aims to turn 'set print inferior-events' always on, and do
some cleanup on the messages printed by GDB when various inferior
events happen (attach, detach, fork, kill, exit).
To make sure that the patch is correct, I've tested it with a handful
of combinations of 'set follow-fork-mode', 'set detach-on-fork' and
'set print inferior-events'. In the end, I decided to make my
hand-made test into an official testcase. More on that below.
Using the following program as an example:
#include <unistd.h>
int main ()
{
fork ();
return 0;
}
We see the following outputs from the patched GDB:
- With 'set print inferior-events on':
(gdb) r
Starting program: a.out
[Detaching after fork from child process 27749]
[Inferior 1 (process 27745) exited normally]
(gdb)
- With 'set print inferior-events off':
(gdb) r
Starting program: a.out
[Inferior 1 (process 27823) exited normally]
(gdb)
Comparing this against an unpatched GDB:
- With 'set print inferior-events off' and 'set follow-fork-mode
child':
(gdb) r
Starting program: a.out
[Inferior 2 (process 5993) exited normally]
(gdb)
Compare this against an unpatched GDB:
(unpatched-gdb) r
Starting program: a.out
[New process 5702]
[Inferior 2 (process 5702) exited normally]
(unpatched-gdb)
It is possible to notice that, in this scenario, the patched GDB
will lose the '[New process %d]' message.
- With 'set print inferior-events on', 'set follow-fork-mode child'
and 'set detach-on-fork on':
(gdb) r
Starting program: a.out
[Attaching after process 27905 fork to child process 27909]
[New inferior 2 (process 27909)]
[Detaching after fork from parent process 27905]
[Inferior 1 (process 27905) detached]
[Inferior 2 (process 27909) exited normally]
(gdb)
Compare this output with an unpatched GDB, using the same settings:
(unpatched-gdb) r
Starting program: a.out
[New inferior 28033]
[Inferior 28029 detached]
[New process 28033]
[Inferior 2 (process 28033) exited normally]
[Inferior 28033 exited]
(unpatched-gdb)
As can be seen above, I've also made a few modifications to messages
that are printed when 'set print inferior-events' is on. For example,
a few of the messages did not contain the '[' and ']' as
prefix/suffix, which led to a few inconsistencies like:
Attaching after process 22995 fork to child process 22999.
[New inferior 22999]
Detaching after fork from child process 22999.
[Inferior 22995 detached]
[Inferior 2 (process 22999) exited normally]
So I took the opportunity and included the square brackets where
applicable. I have also made the existing messages more uniform, by
always printing "Inferior %d (process %d)..." where applicable. This
makes it easier to identify the inferior number and the PID number
from the messages.
As suggested by Pedro, the "[Inferior %d exited]" message from
'exit_inferior' has been removed, because it got duplicated when
'inferior-events' is on. I'm also using the
'add_{thread,inferior}_silent' versions (instead of their verbose
counterparts) on some locations, also to avoid duplicated messages.
For example, a patched GDB with 'set print inferior-events on', 'set
detach-on-fork on' and 'set follow-fork-mode child', but using
'add_thread', would print:
(gdb) run
Starting program: a.out
[Attaching after process 25088 fork to child process 25092.]
[New inferior 25092] <--- duplicated
[Detaching after fork from child process 25092.]
[Inferior 25088 detached]
[New process 25092] <--- duplicated
[Inferior 2 (process 25092) exited normally]
But if we use 'add_thread_silent' (with the same configuration as
before):
(gdb) run
Starting program: a.out
[Attaching after process 31606 fork to child process 31610]
[New inferior 2 (process 31610)]
[Detaching after fork from parent process 31606]
[Inferior 1 (process 31606) detached]
[Inferior 2 (process 31610) exited normally]
As for the tests, the configuration options being exercised are:
- follow-fork-mode: child/parent
- detach-on-fork: on/off
- print inferior-events: on/off
It was also necessary to perform adjustments on several testcases,
because the expected messages changed considerably.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Print message when inferior has
been killed.
* inferior.c (print_inferior_events): Remove 'static'. Set as
'1'.
(add_inferior): Improve message printed when
'print_inferior_events' is on.
(exit_inferior): Remove message printed when
'print_inferior_events' is on.
(detach_inferior): Improve message printed when
'print_inferior_events' is on.
(initialize_inferiors): Use 'add_inferior_silent' to set
'current_inferior_'.
* inferior.h (print_inferior_events): Declare here as
'extern'.
* infrun.c (follow_fork_inferior): Print '[Attaching...]' or
'[Detaching...]' messages when 'print_inferior_events' is on.
Use 'add_thread_silent' instead of 'add_thread'. Add '[' and ']'
as prefix/suffix for messages. Remove periods. Fix erroneous
'Detaching after fork from child...', replace it by '... from
parent...'.
(handle_vfork_child_exec_or_exit): Add '[' and ']' as
prefix/suffix when printing 'Detaching...' messages. Print
them when 'print_inferior_events' is on.
* remote.c (remote_detach_1): Print message when detaching
from inferior and '!is_fork_parent'.
gdb/testsuite/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/attach-non-pgrp-leader.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.base/attach.exp: Likewise.
* gdb.base/catch-syscall.exp (check_for_program_end): Adjust
"gdb_continue_to_end".
(test_catch_syscall_with_wrong_args): Likewise.
* gdb.base/foll-fork.exp: Adjust regexps to match '[' and
']'. Don't set 'verbose' on.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.c: New file.
* gdb.base/fork-print-inferior-events.exp: New file.
* gdb.base/hook-stop.exp: Adjust regexps to expect for new
'[Inferior ... has been killed]' message.
* gdb.base/kill-after-signal.exp: Likewise.
* gdb.base/solib-overlap.exp: Adjust regexps to expect for new
detach message.
* gdb.threads/kill.exp: Adjust regexps to expect for new kill
message.
* gdb.threads/clone-attach-detach.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.threads/process-dies-while-detaching.exp: Likewise.
|
||
|
Pedro Alves
|
731f534f91 |
Replace finish_thread_state_cleanup with a RAII class
gdb/ChangeLog: 2018-04-10 Pedro Alves <palves@redhat.com> * gdbthread.h (finish_thread_state_cleanup): Delete declaration. (scoped_finish_thread_state): New class. * infcmd.c (run_command_1): Use it instead of finish_thread_state cleanup. * infrun.c (proceed, prepare_for_detach, wait_for_inferior) (fetch_inferior_event, normal_stop): Likewise. * thread.c (finish_thread_state_cleanup): Delete. |
||
|
Tom Tromey
|
76727919ce |
Convert observers to C++
This converts observers from using a special source-generating script to be plain C++. This version of the patch takes advantage of C++11 by using std::function and variadic templates; incorporates Pedro's patches; and renames the header file to "observable.h" (this change eliminates the need for a clean rebuild). Note that Pedro's patches used a template lambda in tui-hooks.c, but this failed to compile on some buildbot instances (presumably due to differing C++ versions); I replaced this with an ordinary template function. Regression tested on the buildbot. gdb/ChangeLog 2018-03-19 Pedro Alves <palves@redhat.com> Tom Tromey <tom@tromey.com> * unittests/observable-selftests.c: New file. * common/observable.h: New file. * observable.h: New file. * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c, arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c, breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c, corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c, extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c, infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c, linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c, mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c, ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c, python/py-breakpoint.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c, record-btrace.c, record-full.c, record.c, regcache.c, remote.c, riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c, spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c, symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c, tui/tui-interp.c, valops.c: Update all users. * tui/tui-hooks.c (tui_bp_created_observer) (tui_bp_deleted_observer, tui_bp_modified_observer) (tui_inferior_exit_observer, tui_before_prompt_observer) (tui_normal_stop_observer, tui_register_changed_observer): Remove. (tui_observers_token): New global. (attach_or_detach, tui_attach_detach_observers): New functions. (tui_install_hooks, tui_remove_hooks): Use tui_attach_detach_observers. * record-btrace.c (record_btrace_thread_observer): Remove. (record_btrace_thread_observer_token): New global. * observer.sh: Remove. * observer.c: Rename to observable.c. * observable.c (namespace gdb_observers): Define new objects. (observer_debug): Move into gdb_observers namespace. (struct observer, struct observer_list, xalloc_observer_list_node) (xfree_observer_list_node, generic_observer_attach) (generic_observer_detach, generic_observer_notify): Remove. (_initialize_observer): Update. Don't include observer.inc. * Makefile.in (generated_files): Remove observer.h, observer.inc. (clean mostlyclean): Likewise. (observer.h, observer.inc): Remove targets. (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c. (COMMON_SFILES): Use observable.c, not observer.c. * .gitignore: Remove observer.h. gdb/doc/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * observer.texi: Remove. gdb/testsuite/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * gdb.gdb/observer.exp: Remove. |
||
Yao Qi
|
215c69dc9a |
No longer create readonly regcache
Nowadays, we create a readonly regcache in get_return_value, and pass it to gdbarch_return_value to get the return value. In theory, we can pass a readable_regcache instance and get the return value, because we don't need to modify the regcache. Unfortunately, gdbarch_return_value is designed to multiplex regcache, according to READBUF and WRITEBUF. # If READBUF is not NULL, extract the return value and save it in this # buffer. # # If WRITEBUF is not NULL, it contains a return value which will be # stored into the appropriate register. In fact, gdbarch_return_value should be split to three functions, 1) only return return_value_convention, 2) pass regcache_readonly and readbuf, 3) pass regcache and writebuf. These changes are out of the scope of this patch series, so I pass regcache to gdbarch_return_value even for read, and trust each gdbarch backend doesn't modify regcache. gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * infcmd.c (get_return_value): Let stop_regs point to get_current_regcache. * regcache.c (regcache::regcache): Remove. (register_dump_reg_buffer): New class. (regcache_print): Adjust. * regcache.h (regcache): Remove constructors. |
||
|
Tom Tromey
|
b46a8d7c1d |
Move some declarations to source.h
I noticed a few declarations in defs.h that really could be put into source.h. I think it's generally preferable to something out of defs.h unless it is needed by most of the files in gdb. gdb/ChangeLog 2018-02-14 Tom Tromey <tom@tromey.com> * solib.c: Include source.h. * nto-tdep.c: Include source.h. * mi/mi-cmd-env.c: Include source.h. * infcmd.c: Include source.h. * exec.c: Include source.h. * defs.h (enum openp_flag, openp, source_full_path_of, mod_path) (add_path, directory_switch, source_path, init_source_path): Move declarations... * source.h (enum openp_flag, openp, source_full_path_of, mod_path) (add_path, directory_switch, source_path, init_source_path): ...here. |
||
Ruslan Kabatsayev
|
e813d34aaa |
Align natural-format register values to the same column
Currently, commands such as "info reg", "info all-reg", as well as register window in the TUI print badly aligned columns, like here: eax 0x1 1 ecx 0xffffd3e0 -11296 edx 0xffffd404 -11260 ebx 0xf7fa5ff4 -134586380 esp 0xffffd390 0xffffd390 ebp 0xffffd3c8 0xffffd3c8 esi 0x0 0 edi 0x0 0 eip 0x8048b60 0x8048b60 <main+16> eflags 0x286 [ PF SF IF ] cs 0x23 35 ss 0x2b 43 ds 0x2b 43 es 0x2b 43 fs 0x0 0 gs 0x63 99 After this patch, these commands print the third column values consistently aligned one under another, provided the second column is not too long. Originally, the third column was (attempted to be) aligned using a simple tab character. This patch changes the alignment to spaces only. The tests checking the output and expecting the single tab have been fixed in a previous patch, so this change doesn't break any. gdb/ChangeLog: * infcmd.c (default_print_one_register_info): Align natural-format column values consistently one under another. (pad_to_column): New function. |
||
|
Pedro Alves
|
e671cd59d7 |
Per-inferior target_terminal state, fix PR gdb/13211, more
In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
|
||
|
Simon Marchi
|
6e1e1966ba |
Pass inferior down to target_detach and to_detach
The to_detach target_ops method implementations are currently expected to work on current_inferior/inferior_ptid. In order to make things more explicit, and remove some "shadow" parameter passing through globals, this patch adds an "inferior" parameter to to_detach. Implementations will be expected to use this instead of relying on the global. However, to keep things simple, this patch only does the minimum that is necessary to add the parameter. The following patch gives an example of how one such implementation would be adapted. If the approach is deemed good, we can then look into adapting more implementations. Until then, they'll continue to work as they do currently. gdb/ChangeLog: * target.h (struct target_ops) <to_detach>: Add inferior parameter. (target_detach): Likewise. * target.c (dispose_inferior): Pass inferior down. (target_detach): Pass inferior down. Assert that it is equal to the current inferior. * aix-thread.c (aix_thread_detach): Pass inferior down. * corefile.c (core_file_command): Pass current_inferior() down. * corelow.c (core_detach): Add inferior parameter. * darwin-nat.c (darwin_detach): Likewise. * gnu-nat.c (gnu_detach): Likewise. * inf-ptrace.c (inf_ptrace_detach): Likewise. * infcmd.c (detach_command): Pass current_inferior() down to target_detach. * infrun.c (follow_fork_inferior): Pass parent_inf to target_detach. (handle_vfork_child_exec_or_exit): Pass inf->vfork_parent to target_detach. * linux-nat.c (linux_nat_detach): Add inferior parameter. * linux-thread-db.c (thread_db_detach): Likewise. * nto-procfs.c (procfs_detach): Likewise. * procfs.c (procfs_detach): Likewise. * record.c (record_detach): Likewise. * record.h (struct inferior): Forward-declare. (record_detach): Add inferior parameter. * remote-sim.c (gdbsim_detach): Likewise. * remote.c (remote_detach_1): Likewise. (remote_detach): Likewise. (extended_remote_detach): Likewise. * sol-thread.c (sol_thread_detach): Likewise. * target-debug.h (target_debug_print_inferior_p): New macro. * target-delegates.c: Re-generate. * top.c (kill_or_detach): Pass inferior down to target_detach. * windows-nat.c (windows_detach): Add inferior parameter. |
||
|
Simon Marchi
|
6bd6f3b656 |
Remove args from target detach
I was looking into adding a parameter to target_detach, and was
wondering what the args parameter was. It seems like in the distant
past, it was possible to specify a signal number when detaching. That
signal was injected in the process before it was detached. There is an
example of code handling this in linux_nat_detach. With today's GDB, I
can't get this to work. Doing "detach 15" (15 == SIGTERM) doesn't work,
because detach is a prefix command and doesn't recognize the sub-command
15. Doing "detach inferiors 15" doesn't work because it expects a list
of inferior id to detach. Therefore, I don't think there's a way of
invoking detach_command with a non-NULL args. I also didn't find any
documentation related to this feature.
I assume that this feature stopped working when detach was made a prefix
command, which is in
|
||
|
Joel Brobecker
|
e2882c8578 |
Update copyright year range in all GDB files
gdb/ChangeLog:
Update copyright year range in all GDB files
|
||
Stafford Horne
|
b67d92b06e |
reggroups: Add test and docs for info reg $reggroup feature
Until now this feature has existed but was not documented. Adding docs and tests. gdb/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * infcmd.c (_initialize_infcmd): Add help for info reg $reggroup and info all-registers $reggroup feature. gdb/doc/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * gdb.texinfo (Registers): Document info reg $reggroup feature. gdb/testsuite/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * gdb.base/reggroups.c: New file. * gdb.base/reggroups.exp: New file. |
||
|
Simon Marchi
|
798a7429f9 |
Remove some unused variables
This patch removes some unused variables, found with -Wunused. I have not removed everything reported by -Wunused, because some expressions such as struct type *arg_type = check_typedef (value_type); in bfin-tdep.c could have an unexpected but important side-effect. I removed others that I considered more low-risk, such as: struct gdbarch *gdbarch = get_objfile_arch (objfile); I tested building with Python 2/Python 3/no Python, with/without expat, with/without libipt and with/without babeltrace. gdb/ChangeLog: * ada-lang.c (ada_collect_symbol_completion_matches): Remove unused variables. (ada_is_redundant_range_encoding): Likewise. * ada-varobj.c (ada_varobj_get_value_of_array_variable): Likewise. * alpha-tdep.c (alpha_software_single_step): Likewise. * arm-tdep.c (_initialize_arm_tdep): Likewise. * auto-load.c (info_auto_load_cmd): Likewise. * break-catch-syscall.c (insert_catch_syscall): Likewise. (remove_catch_syscall): Likewise. * breakpoint.c (condition_completer): Likewise. (clear_command): Likewise. (update_breakpoint_locations): Likewise. * btrace.c (btrace_disable): Likewise. (btrace_teardown): Likewise. (btrace_maint_update_pt_packets): Likewise. (maint_btrace_clear_cmd): Likewise. * cli/cli-decode.c (lookup_cmd_1): Likewise. (lookup_cmd_composition): Likewise. * cli/cli-dump.c (scan_filename): Likewise. (restore_command): Likewise. * compile/compile-loc2c.c (compute_stack_depth): Likewise. * compile/compile-object-load.c (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (compile_to_object): Likewise. * completer.c (filename_completer): Likewise. (complete_files_symbols): Likewise. (complete_expression): Likewise. * corelow.c (core_open): Likewise. * ctf.c (ctf_start): Likewise. (ctf_write_status): Likewise. (ctf_write_uploaded_tsv): Likewise. (ctf_write_definition_end): Likewise. (ctf_open_dir): Likewise. (ctf_xfer_partial): Likewise. (ctf_trace_find): Likewise. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. (indirect_pieced_value): Likewise. (dwarf2_evaluate_loc_desc_full): Likewise. * dwarf2read.c (dw2_expand_marked_cus): Likewise. (dw2_expand_symtabs_matching): Likewise. (dw2_map_symbol_filenames): Likewise. (read_and_check_comp_unit_head): Likewise. (read_cutu_die_from_dwo): Likewise. (lookup_dwo_unit): Likewise. (read_comp_units_from_section): Likewise. (dwarf2_compute_name): Likewise. (handle_DW_AT_stmt_list): Likewise. (create_cus_hash_table): Likewise. (create_dwp_v2_section): Likewise. (dwarf2_rnglists_process): Likewise. (dwarf2_ranges_process): Likewise. (dwarf2_record_block_ranges): Likewise. (is_vtable_name): Likewise. (read_formatted_entries): Likewise. (skip_form_bytes): Likewise. * elfread.c (elf_symtab_read): Likewise. * exec.c (exec_file_command): Likewise. * f-valprint.c (f_val_print): Likewise. (info_common_command_for_block): Likewise. * guile/guile.c (initialize_scheme_side): Likewise. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise. * guile/scm-cmd.c (cmdscm_completer): Likewise. (gdbscm_register_command_x): Likewise. * guile/scm-frame.c (gdbscm_frame_read_var): Likewise. * guile/scm-param.c (gdbscm_parameter_value): Likewise. * guile/scm-ports.c (file_port_magic): Likewise. * guile/scm-pretty-print.c (ppscm_search_pp_list): Likewise. (ppscm_pretty_print_one_value): Likewise. (ppscm_print_children): Likewise. * guile/scm-string.c (gdbscm_string_to_argv): Likewise. * guile/scm-symtab.c (gdbscm_sal_symtab): Likewise. * guile/scm-type.c (gdbscm_type_next_field_x): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * i386-tdep.c (i386_register_reggroup_p): Likewise. * infcmd.c (run_command_1): Likewise. (until_next_fsm_clean_up): Likewise. * linespec.c (linespec_complete): Likewise. (find_label_symbols): Likewise. * m2-valprint.c (m2_val_print): Likewise. * memattr.c (require_user_regions): Likewise. (lookup_mem_region): Likewise. (disable_mem_command): Likewise. (mem_delete): Likewise. * mep-tdep.c (mep_register_name): Likewise. (mep_analyze_prologue): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Likewise. * mi/mi-interp.c (mi_on_sync_execution_done): Likewise. * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise. * microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (lookup_minimal_symbol): Likewise. * mips-linux-tdep.c (mips64_fill_fpregset): Likewise. * mips-tdep.c (mips_stub_frame_sniffer): Likewise. (mips_o64_return_value): Likewise. (mips_single_step_through_delay): Likewise. (_initialize_mips_tdep): Likewise. * nios2-tdep.c (nios2_push_dummy_call): Likewise. (nios2_software_single_step): Likewise. * parse.c (find_minsym_type_and_address): Likewise. * psymtab.c (psym_relocate): Likewise. * python/py-breakpoint.c (bppy_get_commands): Likewise. (gdbpy_breakpoint_modified): Likewise. * python/py-infevents.c (create_inferior_call_event_object): Likewise. * python/py-record-btrace.c (btpy_list_item): Likewise. * python/py-type.c (typy_str): Likewise. * python/py-value.c (valpy_call): Likewise. * python/python.c (do_start_initialization): Likewise. * record-btrace.c (record_btrace_insn_history_range): Likewise. (record_btrace_call_history_range): Likewise. (record_btrace_record_method): Likewise. (record_btrace_xfer_partial): Likewise. (btrace_get_frame_function): Likewise. * record-full.c (record_full_open): Likewise. * record.c (get_context_size): Likewise. * registry.h (DEFINE_REGISTRY): Likewise. * remote-fileio.c (remote_fileio_request): Likewise. * remote.c (remote_update_thread_list): Likewise. (remote_check_symbols): Likewise. (remote_commit_resume): Likewise. (remote_interrupt): Likewise. (remote_insert_breakpoint): Likewise. (compare_sections_command): Likewise. * rust-exp.y (super_name): Likewise. (lex_string): Likewise. (convert_ast_to_type): Likewise. (convert_ast_to_expression): Likewise. * rust-lang.c (rust_print_struct_def): Likewise. (rust_print_type): Likewise. (rust_evaluate_subexp): Likewise. * rx-tdep.c (rx_register_type): Likewise. * ser-event.c (serial_event_clear): Likewise. * serial.c (serial_open): Likewise. * spu-tdep.c (spu_overlay_new_objfile): Likewise. * symfile.c (section_is_overlay): Likewise. (overlay_unmapped_address): Likewise. (overlay_mapped_address): Likewise. (simple_overlay_update_1): Likewise. (simple_overlay_update): Likewise. * symtab.c (symbol_find_demangled_name): Likewise. (search_symbols): Likewise. * target-descriptions.c (tdesc_predefined_type): Likewise. * target.c (target_commit_resume): Likewise. * thread.c (print_selected_thread_frame): Likewise. * top.c (new_ui_command): Likewise. (gdb_readline_no_editing): Likewise. * tracefile-tfile.c (tfile_open): Likewise. * tracepoint.c (create_tsv_from_upload): Likewise. * utils.c (quit): Likewise. (defaulted_query): Likewise. * valarith.c (value_concat): Likewise. * xml-syscall.c (xml_list_syscalls_by_group): Likewise. * xml-tdesc.c (target_fetch_description_xml): Likewise. * xtensa-tdep.c (xtensa_pseudo_register_read): Likewise. (xtensa_pseudo_register_write): Likewise. gdb/gdbserver/ChangeLog: * regcache.c (registers_to_string): Remove unused variable. |
||
|
Tom Tromey
|
eb4c3f4aaa |
Constify add_setshow_*
This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify. |
||
|
Tom Tromey
|
1d12d88f18 |
Constify add_info
This patch constifies add_info and updates all the info commands. The bulk of this patch was written using a script; and then I did a manual pass to fix up the remaining compilation errors. I could not compile every changed file; in particular nto-procfs.c, gnu-nat.c, and darwin-nat-info.c; but I at least tried to check the correctness by inspection. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * frame.h (info_locals_command, info_args_command): Constify. * auto-load.h (auto_load_info_scripts): Constify. * inferior.h (registers_info): Constify. * copying.c: Rebuild. * copying.awk: Constify generated commands. * auto-load.c (auto_load_info_scripts) (info_auto_load_gdb_scripts): Constify. * cli/cli-decode.c (struct cmd_list_element): Take a cmd_const_cfunc_ftype. * command.h (add_info): Take a cmd_const_cfunc_ftype. * tui/tui-win.c (tui_all_windows_info): Constify. * python/py-auto-load.c (info_auto_load_python_scripts): Constify. * cli/cli-cmds.c (show_command): Remove non-const overload. * tracepoint.c (info_tvariables_command, info_scope_command): Constify. (info_static_tracepoint_markers_command): Constify. * thread.c (info_threads_command): Constify. (print_thread_info_1): Constify. * target.c (info_target_command): Constify. * symtab.c (info_sources_command, info_functions_command) (info_types_command): Constify. (info_variables_command): Remove non-const overload. * symfile.c (info_ext_lang_command): Constify. * stack.c (info_frame_command, info_locals_command) (info_args_command): Constify. (backtrace_command): Remove non-const overload. * source.c (info_source_command, info_line_command): Constify. * solib.c (info_sharedlibrary_command): Constify. * skip.c (info_skip_command): Constify. * ser-go32.c (info_serial_command): Constify. * reverse.c (info_bookmarks_command): Constify. * printcmd.c (info_symbol_command, info_address_command) (info_display_command): Constify. * osdata.c (info_osdata_command): Constify. * objc-lang.c (info_selectors_command, info_classes_command): Constify. * nto-procfs.c (procfs_pidlist, procfs_meminfo): Constify. * memattr.c (info_mem_command): Constify. * macrocmd.c (info_macro_command, info_macros_command): Constify. * linux-fork.c (info_checkpoints_command): Constify. * infrun.c (info_signals_command): Constify. * inflow.c (info_terminal_command): Constify. * inferior.c (info_inferiors_command): Constify. (print_inferior): Constify. * infcmd.c (info_program_command, info_all_registers_command) (info_registers_command, info_vector_command) (info_float_command): Constify. (registers_info): Constify. * gnu-nat.c (info_send_rights_cmd, info_recv_rights_cmd) (info_port_sets_cmd, info_dead_names_cmd, info_port_rights_cmd): Constify. * f-valprint.c (info_common_command): Constify. * dcache.c (info_dcache_command): Constify. (dcache_info_1): Constify. * darwin-nat-info.c (info_mach_tasks_command) (info_mach_task_command, info_mach_ports_command) (info_mach_port_command, info_mach_threads_command) (info_mach_thread_command, info_mach_regions_command) (info_mach_regions_recurse_command, info_mach_region_command) (info_mach_exceptions_command): Constify. (get_task_from_args): Constify. * cp-support.c (info_vtbl_command): Constify. * breakpoint.c (info_watchpoints_command) (info_tracepoints_command): Constify. (info_breakpoints_command): Remove non-const overload. * avr-tdep.c (avr_io_reg_read_command): Constify. * auxv.c (info_auxv_command): Constify. * ada-tasks.c (info_tasks_command): Constify. (info_task): Constify. * ada-lang.c (info_exceptions_command): Constify. |
||
|
Tom Tromey
|
0b39b52e6e |
Constify add_com
This changes add_com to take a cmd_const_cfunc_ftype, and then fixes up all the command implementations. In most cases this is trivial. In a couple of places I had to again introduce a temporary non-const overload. These overloads will be removed when add_info is constified. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * solib.h (no_shared_libraries): Constify. * frame.h (return_command): Constify. * cli/cli-cmds.h (quit_command): Constify. * top.h (quit_command, execute_command): Constify. * target.h (flash_erase_command): Constify. * inferior.h (set_inferior_args, attach_command): Constify. * tracepoint.h (start_tracing, stop_tracing): Constify. * breakpoint.h (break_command, tbreak_command) (hbreak_command_wrapper, thbreak_command_wrapper) (rbreak_command_wrapper, watch_command_wrapper) (awatch_command_wrapper, rwatch_command_wrapper) (get_tracepoint_by_number): Constify. * symtab.c (info_variables_command, rbreak_command) (symtab_symbol_info): Constify. (info_variables_command): Add non-const overload. * top.c (dont_repeat_command): Constify. * breakpoint.c (ignore_command, commands_command) (condition_command, tbreak_command, hbreak_command) (thbreak_command, clear_command, break_command) (info_breakpoints_command, watch_command, rwatch_command) (awatch_command, trace_command, ftrace_command, strace_command) (trace_pass_command, break_range_command, dprintf_command) (agent_printf_command, get_tracepoint_by_number) (watch_maybe_just_location, trace_pass_command): Constify. (info_breakpoints_command): Add non-const overload. * tracefile.c (tsave_command): Constify. * infcmd.c (attach_command, disconnect_command, signal_command) (queue_signal_command, stepi_command, nexti_command) (finish_command, next_command, step_command, until_command) (advance_command, jump_command, continue_command, run_command) (start_command, starti_command, interrupt_command) (run_command_1, set_inferior_args, step_1): Constify. * inferior.c (add_inferior_command, remove_inferior_command) (clone_inferior_command): Constify. * linux-fork.c (checkpoint_command, restart_command): Constify. * windows-nat.c (signal_event_command): Constify. * guile/guile.c (guile_repl_command, guile_command): Constify. * printcmd.c (x_command, display_command, printf_command) (output_command, set_command, call_command, print_command) (eval_command): Constify. (non_const_set_command): Remove. (_initialize_printcmd): Update. * source.c (forward_search_command, reverse_search_command): Constify. * jit.c (jit_reader_load_command, jit_reader_unload_command): Constify. * infrun.c (handle_command): Constify. * memattr.c (mem_command): Constify. * stack.c (return_command, up_command, up_silently_command) (down_command, down_silently_command, frame_command) (backtrace_command, func_command, backtrace_command_1): Constify. (backtrace_command): Add non-const overload. * remote-sim.c (simulator_command): Constify. * exec.c (set_section_command): Constify. * tracepoint.c (tdump_command, trace_variable_command) (tstatus_command, tstop_command, tstart_command) (end_actions_pseudocommand, while_stepping_pseudocommand) (collect_pseudocommand, teval_pseudocommand, actions_command) (start_tracing, stop_tracing): Constify. * value.c (init_if_undefined_command): Constify. * tui/tui-stack.c (tui_update_command): Constify. * tui/tui-win.c (tui_refresh_all_command) (tui_set_tab_width_command, tui_set_win_height_command) (tui_set_focus_command, tui_scroll_forward_command) (tui_scroll_backward_command, tui_scroll_left_command) (tui_scroll_right_command, parse_scrolling_args, tui_set_focus) (tui_set_win_height): Constify. * tui/tui-layout.c (tui_layout_command): Constify. * procfs.c (proc_trace_syscalls, proc_trace_sysentry_cmd) (proc_trace_sysexit_cmd, proc_untrace_sysentry_cmd) (proc_untrace_sysexit_cmd): Constify. * remote.c (threadlist_test_cmd, threadinfo_test_cmd) (threadset_test_cmd, threadlist_update_test_cmd) (threadalive_test): Constify. * objc-lang.c (print_object_command): Constify. * command.h (add_com): Constify. * cli/cli-dump.c (restore_command): Constify. * cli/cli-cmds.c (pwd_command, echo_command, quit_command) (help_command, complete_command, shell_command, edit_command) (list_command, disassemble_command, make_command) (apropos_command, alias_command): Constify. * cli/cli-script.c (document_command, define_command) (while_command, if_command, validate_comname): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * target.c (do_monitor_command, flash_erase_command): Constify. * regcache.c (reg_flush_command): Constify. * reverse.c (reverse_step, reverse_next, reverse_stepi) (reverse_nexti, reverse_continue, reverse_finish) (save_bookmark_command, goto_bookmark_command) (exec_reverse_once): Constify. * python/python.c (python_interactive_command, python_command): Constify. * typeprint.c (ptype_command, whatis_command, whatis_exp): Constify. * solib.c (sharedlibrary_command, no_shared_libraries): Constify. * gcore.c (gcore_command): Constify. |
||
|
Tom Tromey
|
6be9a197d9 |
Make strip_bg_char return a unique_xmalloc_ptr
This changes strip_bg_char to return a unique_xmalloc_ptr and removes several cleanups. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * infcmd.c (strip_bg_char): Return gdb::unique_xmalloc_ptr. (run_command_1, continue_command, step_1, jump_command) (signal_command, until_command, advance_command, finish_command) (attach_command): Update. |
||
|
Tom Tromey
|
454dafbdf2 |
Introduce gdb_breakpoint_up
This introduces gdb_breakpoint_up, a unique_ptr typedef that owns a breakpoint. It then changes set_momentary_breakpoint to return a gdb_breakpoint_up and fixes up the fallout. This then allows the removal of make_cleanup_delete_breakpoint. Once breakpoints are fully C++-ified, this typedef can be removed in favor of a plain std::unique_ptr. gdb/ChangeLog 2017-11-04 Tom Tromey <tom@tromey.com> * breakpoint.c (set_momentary_breakpoint): Return breakpoint_up. (until_break_command): Update. (new_until_break_fsm): Change argument types to breakpoint_up. (set_momentary_breakpoint_at_pc): Return breakpoint_up. (do_delete_breakpoint_cleanup, make_cleanup_delete_breakpoint): Remove. * infcmd.c (finish_forward): Update. * breakpoint.h (set_momentary_breakpoint) (set_momentary_breakpoint_at_pc): Return breakpoint_up. (make_cleanup_delete_breakpoint): Remove. (struct breakpoint_deleter): New. (breakpoint_up): New typedef. * infrun.c (insert_step_resume_breakpoint_at_sal_1): Update. (insert_exception_resume_breakpoint): Update. (insert_exception_resume_from_probe): Update. (insert_longjmp_resume_breakpoint): Update. * arm-linux-tdep.c (arm_linux_copy_svc): Update. * elfread.c (elf_gnu_ifunc_resolver_stop): Update. * infcall.c (call_function_by_hand_dummy): Update |
||
|
Tom Tromey
|
981a3fb359 |
Constify add_prefix_cmd
This changes add_prefix_cmd to accept a const-taking function as an argument; then fixes up all the callers. In a couple of spots I had to add a non-const overload of a function, because the function is passed to two different command-adding "constructors". These overloads are temporary; once constification is complete they can be removed. This patch also fixes a typo I happened to notice while constifying. Note that this touches a couple of files (gnu-nat.c and go32-nat.c) that I can't build. So, while I made a best-effort there, I am not certain they will still compile. Tested by rebuilding. gdb/ChangeLog 2017-10-11 Tom Tromey <tom@tromey.com> * gdbthread.h (thread_command): Constify. * inferior.h (detach_command): Constify. * top.h (set_history, show_history): Constify. * arm-tdep.c (set_arm_command, show_arm_command): Constify. * serial.c (serial_set_cmd, serial_show_cmd): Constify. * bsd-kvm.c (bsd_kvm_cmd): Constify. * printcmd.c (set_command): Constify. (non_const_set_command): New function. * dcache.c (set_dcache_command, show_dcache_command): Constify. * breakpoint.c (enable_command, disable_command, delete_command) (catch_command, tcatch_command, set_breakpoint_cmd) (show_breakpoint_cmd): Constify. * macrocmd.c (macro_command): Constify. * infcmd.c (unset_command, kill_command, detach_command) (info_proc_cmd): Constify. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify. * auto-load.c (show_auto_load_cmd, set_auto_load_cmd) (info_auto_load_cmd): Constify. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Constify. * ada-lang.c (set_ada_command, show_ada_command) (maint_set_ada_cmd, maint_show_ada_cmd): Constify. * guile/guile.c (set_guile_command, show_guile_command) (info_guile_command): Constify. * tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd): Constify. * skip.c (skip_command): Constify. * compile/compile.c (_initialize_compile): Constify. * dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd): Constify. * remote.c (set_remote_cmd, show_remote_cmd, remote_command): Constify. * python/python.c (user_show_python, user_set_python): Constify. * mips-tdep.c (set_mips_command, show_mips_command) (set_mipsfpu_command): Constify. * record-btrace.c (cmd_record_btrace_start) (cmd_set_record_btrace, cmd_show_record_btrace) (cmd_set_record_btrace_bts, cmd_show_record_btrace_bts) (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command): Constify. * symfile.c (overlay_command): Constify. * spu-tdep.c (set_spu_command, show_spu_command): Constify. * cli/cli-logging.c (set_logging_command, show_logging_command): Constify. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * cli/cli-cmds.c (info_command, show_command, set_debug) (show_debug): Constify. (show_command): Add non-const overload. * top.c (set_history, show_history): Constify. * sh-tdep.c (set_sh_command, show_sh_command): Constify. * command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype. * target.c (target_command): Constify. * sparc64-tdep.c (info_adi_command): Constify. * record-full.c (cmd_record_full_start): Constify. (set_record_full_command): Constify. Fix typo. (show_record_full_command): Constify. * thread.c (thread_command, thread_apply_command): Constify. * memattr.c (dummy_cmd): Constify. * value.c (function_command): Constify. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify. * probe.c (info_probes_command): Constify. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify. * gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd) (show_thread_cmd, set_thread_default_cmd) (show_thread_default_cmd): Constify. (check_empty): Constify. * tracepoint.c (tfind_command): Constify. * cp-support.c (maint_cplus_command): Constify. * windows-tdep.c (info_w32_command): Constify. * record.c (cmd_record_start, set_record_command) (show_record_command, info_record_command, cmd_record_goto): Constify. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Constify. * utils.c (set_internal_problem_cmd, show_internal_problem_cmd): Constify. (add_internal_problem_command): Remove casts. * arc-tdep.c (maintenance_print_arc_command): Constify. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Constify. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd) (maintenance_show_cmd, set_per_command_cmd) (show_per_command_cmd, maintenance_check_command): Constify. * language.c (set_check, show_check): Constify. * typeprint.c (show_print_type, set_print_type): Constify. * go32-nat.c (go32_info_dos_command): Constify. |
||
|
Sergio Durigan Junior
|
bc3b087de2 |
Extend "set cwd" to work on gdbserver
This is the "natural" extension necessary for the "set cwd" command (and the whole "set the inferior's cwd" logic) to work on gdbserver. The idea here is to have a new remote packet, QSetWorkingDir (name adopted from LLDB's extension to the RSP, as can be seen at <https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>), which sends an hex-encoded string representing the working directory that the remote inferior will use. There is a slight difference from the packet proposed by LLDB: GDB's version will accept empty arguments, meaning that the user wants to clear the previously set working directory for the inferior (i.e., "set cwd" without arguments on GDB). For UNIX-like targets this feature is already implemented on nat/fork-inferior.c, and all gdbserver has to do is to basically implement "set_inferior_cwd" and call it whenever such packet arrives. For other targets, like Windows, it is possible to use the existing "get_inferior_cwd" function and do the necessary steps to make sure that the inferior will use the specified working directory. Aside from that, the patch consists basically of updates to the testcase (making it available on remote targets) and the documentation. No regressions found. gdb/ChangeLog: 2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com> * NEWS (Changes since GDB 8.0): Add entry about new 'set-cwd-on-gdbserver' feature. (New remote packets): Add entry for QSetWorkingDir. * common/common-inferior.h (set_inferior_cwd): New prototype. * infcmd.c (set_inferior_cwd): Remove "static". (show_cwd_command): Expand text to include remote debugging. * remote.c: Add PACKET_QSetWorkingDir. (remote_protocol_features) <QSetWorkingDir>: New entry for PACKET_QSetWorkingDir. (extended_remote_set_inferior_cwd): New function. (extended_remote_create_inferior): Call "extended_remote_set_inferior_cwd". (_initialize_remote): Call "add_packet_config_cmd" for QSetWorkingDir. gdb/gdbserver/ChangeLog: 2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com> * inferiors.c (set_inferior_cwd): New function. * server.c (handle_general_set): Handle QSetWorkingDir packet. (handle_query): Inform that QSetWorkingDir is supported. * win32-low.c (create_process): Pass the inferior's cwd to CreateProcess. gdb/testsuite/ChangeLog: 2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.base/set-cwd.exp: Make it available on native-extended-gdbserver. gdb/doc/ChangeLog: 2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.texinfo (Starting your Program) <The working directory.>: Mention remote debugging. (Working Directory) <Your Program's Working Directory>: Likewise. (Connecting) <Remote Packet>: Add "set-working-dir" and "QSetWorkingDir" to the table. (Remote Protocol) <QSetWorkingDir>: New item, explaining the packet. |
||
|
Sergio Durigan Junior
|
d092c5a246 |
Implement "set cwd" command on GDB
This commit adds new "set/show cwd" commands, which are used to set/show the current working directory of the inferior that will be started. The idea here is that "set cwd" will become the de facto way of setting the inferior's cwd. Currently, the user can use "cd" for that, but there are side effects: with "cd", GDB also switches to another directory, and that can impact the loading of scripts and other files. With "set cwd", we separate the logic into a new command. To maintain backward compatibility, if the user issues a "cd" command but doesn't use "set cwd", then the inferior's cwd will still be changed according to what the user specified. However, "set cwd" has precedence over "cd", so it can always be used to override it. "set cwd" works in the following way: - If the user sets the inferior's cwd by using "set cwd", then this directory is saved into current_inferior ()->cwd and is used when the inferior is started (see below). - If the user doesn't set the inferior's cwd by using "set cwd", but rather use the "cd" command as before, then this directory is inherited by the inferior because GDB will have chdir'd into it. On Unix-like hosts, the way the directory is changed before the inferior execution is by expanding the user set directory before the fork, and then "chdir" after the call to fork/vfork on "fork_inferior", but before the actual execution. On Windows, the inferior cwd set by the user is passed directly to the CreateProcess call, which takes care of the actual chdir for us. This way, we'll make sure that GDB's cwd is not affected by the user set cwd. gdb/ChangeLog: 2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com> * NEWS (New commands): Mention "set/show cwd". * cli/cli-cmds.c (_initialize_cli_cmds): Mention "set cwd" on "cd" command's help text. * common/common-inferior.h (get_inferior_cwd): New prototype. * infcmd.c (inferior_cwd_scratch): New global variable. (set_inferior_cwd): New function. (get_inferior_cwd): Likewise. (set_cwd_command): Likewise. (show_cwd_command): Likewise. (_initialize_infcmd): Add "set/show cwd" commands. * inferior.h (class inferior) <cwd>: New field. * nat/fork-inferior.c: Include "gdb_tilde_expand.h". (fork_inferior): Change inferior's cwd before its execution. * windows-nat.c (windows_create_inferior): Pass inferior's cwd to CreateProcess. gdb/gdbserver/ChangeLog: 2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com> * inferiors.c (current_inferior_cwd): New global variable. (get_inferior_cwd): New function. * inferiors.h (struct process_info) <cwd>: New field. gdb/doc/ChangeLog: 2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.texinfo (Starting your Program) <The working directory.>: Mention new "set cwd" command. (Working Directory) <Your Program's Working Directory>: Rephrase to explain that "set cwd" exists and is the default way to change the inferior's cwd. gdb/testsuite/ChangeLog: 2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.base/set-cwd.c: New file. * gdb.base/set-cwd.exp: Likewise. |
||
|
Tom Tromey
|
69f476a36f |
Constify some commands in infcmd.c
gdb/ChangeLog 2017-09-27 Tom Tromey <tom@tromey.com> * infcmd.c (environment_info, set_environment_command) (unset_environment_command, path_info, info_proc_cmd_1) (info_proc_cmd_mappings, info_proc_cmd_stat) (info_proc_cmd_status, info_proc_cmd_cwd, info_proc_cmd_cmdline) (info_proc_cmd_exe, info_proc_cmd_all): Constify. |
||
|
Tom Tromey
|
223ffa714c |
Remove make_cleanup_restore_target_terminal
This removes make_cleanup_restore_target_terminal and generally C++-ifies target terminal handling. It changes all target_terminal_* functions to be static members of a new target_terminal class and changes the cleanup to be a scoped_* class. make_cleanup_override_quit_handler is also removed in favor of simply using scoped_restore. Note that there are some files in this patch that I could not compile. Considering that some of the rewrites were automated, and that none of these files involed cleanups, I feel that this is relatively safe. Regression tested by the buildbot. gdb/ChangeLog 2017-09-20 Tom Tromey <tom@tromey.com> * windows-nat.c (get_windows_debug_event, windows_wait) (do_initial_windows_stuff, windows_attach): Update. * utils.c (vwarning, internal_vproblem): Update. (ui_unregister_input_event_handler_cleanup) (prepare_to_handle_input): Remove. (class scoped_input_handler): New. (defaulted_query, prompt_for_continue): Update. * tui/tui-hooks.c (tui_refresh_frame_and_register_information): Update. * top.c (undo_terminal_modifications_before_exit): Update. * target/target.h (target_terminal_init, target_terminal_inferior) (target_terminal_ours): Don't declare. (class target_terminal): New. * target.h (target_terminal_is_inferior, target_terminal_is_ours) (target_terminal_ours_for_output) (make_cleanup_restore_target_terminal): Don't declare. (target_terminal_info): Remove. * target.c (enum terminal_state, terminal_state): Remove. (target_terminal::terminal_state): Define. (target_terminal::init): Rename from target_terminal_init. (target_terminal::inferior): Rename from target_terminal_inferior. (target_terminal::ours): Rename from target_terminal_ours. (target_terminal::ours_for_output): Rename from target_terminal_ours_for_output. (target_terminal::info): New method. (cleanup_restore_target_terminal) (make_cleanup_restore_target_terminal): Remove. * solib.c (handle_solib_event): Update. * remote.c (remote_serial_quit_handler): Update. (remote_terminal_inferior, remote_wait_as): Update. * record-full.c (record_full_wait_1): Update. * nto-procfs.c (procfs_create_inferior): Update. * nat/fork-inferior.c (startup_inferior): Update. * mi/mi-interp.c (mi_new_thread, mi_thread_exit) (mi_record_changed, mi_inferior_added, mi_inferior_appeared) (mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed) (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified) (mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_on_resume, mi_solib_loaded) (mi_solib_unloaded, mi_command_param_changed, mi_memory_changed) (mi_user_selected_context_changed, report_initial_inferior): Update. * linux-nat.c (linux_nat_attach, linux_nat_terminal_ours) (linux_nat_terminal_inferior): Update. * infrun.c (follow_fork_inferior) (handle_vfork_child_exec_or_exit, do_target_resume) (check_curr_ui_sync_execution_done, handle_inferior_event_1) (handle_signal_stop, maybe_remove_breakpoints, normal_stop): Update. * inflow.c (child_terminal_init, info_terminal_command): Update. * infcmd.c (post_create_inferior, continue_1, prepare_one_step) (attach_command): Update. * infcall.c (call_thread_fsm_should_stop): Update. * gnu-nat.c (gnu_attach): Update. * extension.c (struct active_ext_lang_state) (restore_active_ext_lang): Update. * exceptions.c (print_flush): Update. * event-top.c (async_enable_stdin, default_quit_handler): Update. (struct quit_handler_cleanup_data, restore_quit_handler) (restore_quit_handler_dtor, make_cleanup_override_quit_handler): Remove. * cp-support.c (gdb_demangle): Update. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, handle_jit_event) (disable_breakpoints_in_unloaded_shlib): Update. * annotate.c (annotate_breakpoints_invalid) (annotate_frames_invalid): Update. gdb/gdbserver/ChangeLog 2017-09-20 Tom Tromey <tom@tromey.com> * target.c (target_terminal::terminal_state): Define. (target_terminal::init): Rename from target_terminal_init. (target_terminal::inferior): Rename from target_terminal_inferior. (target_terminal::ours): Rename from target_terminal_ours. (target_terminal::ours_for_output, target_terminal::info): New. |
||
|
John Baldwin
|
4e5a4f5850 |
Add a 'starti' command.
This works like 'start' but it stops at the first instruction rather than the first line in main(). This is useful if one wants to single step through runtime linker startup. While here, introduce a RUN_ARGS_HELP macro for shared help text between run, start, and starti. This includes expanding the help for start and starti to include details from run's help text. gdb/ChangeLog: * NEWS (Changes since GDB 8.0): Add starti. * infcmd.c (enum run_break): New. (run_command_1): Queue pending event for RUN_STOP_AT_FIRST_INSN case. (run_command): Use enum run_how. (start_command): Likewise. (starti_command): New function. (RUN_ARGS_HELP): New macro. (_initialize_infcmd): Use RUN_ARGS_HELP for run and start commands. Add starti command. gdb/doc/ChangeLog: * gdb.texinfo (Starting your Program): Add description of starti command. Mention starti command as an alternative for debugging the elaboration phase. gdb/testsuite/ChangeLog: * gdb.base/starti.c: New file. * gdb.base/starti.exp: New file. * lib/gdb.exp (gdb_starti_cmd): New procedure. |
||
|
John Baldwin
|
481695ed5f |
Remove unnecessary function prototypes.
These prototypes were required when compiling GDB as C but are not required for C++. gdb/ChangeLog: * aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat prototype. * aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep prototype. * aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep prototype. * aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype. * ada-exp.y: Remove _initialize_ada_exp prototype. * ada-lang.c: Remove _initialize_ada_language prototype. * ada-tasks.c: Remove _initialize_tasks prototype. * addrmap.c: Remove _initialize_addrmap prototype. * agent.c: Remove _initialize_agent prototype. * aix-thread.c: Remove _initialize_aix_thread prototype. * alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype. * alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype. * alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep prototype. * alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype. * alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype. * alpha-tdep.c: Remove _initialize_alpha_tdep prototype. * amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep prototype. * amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep prototype. * amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype. * amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype. * amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype. * amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep prototype. * amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype. * amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype. * amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype. * amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype. * amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * amd64-tdep.c: Remove _initialize_amd64_tdep prototype. * amd64-windows-nat.c: Remove _initialize_amd64_windows_nat prototype. * amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep prototype. * annotate.c: Remove _initialize_annotate prototype. * arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype. * arc-tdep.c: Remove _initialize_arc_tdep prototype. * arch-utils.c: Remove _initialize_gdbarch_utils prototype. * arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype. * arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype. * arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype. * arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype. * arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep prototype. * arm-tdep.c: Remove _initialize_arm_tdep prototype. * arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype. * auto-load.c: Remove _initialize_auto_load prototype. * auxv.c: Remove _initialize_auxv prototype. * avr-tdep.c: Remove _initialize_avr_tdep prototype. * ax-gdb.c: Remove _initialize_ax_gdb prototype. * bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype. * bfin-tdep.c: Remove _initialize_bfin_tdep prototype. * break-catch-sig.c: Remove _initialize_break_catch_sig prototype. * break-catch-syscall.c: Remove _initialize_break_catch_syscall prototype. * break-catch-throw.c: Remove _initialize_break_catch_throw prototype. * breakpoint.c: Remove _initialize_breakpoint prototype. * bsd-uthread.c: Remove _initialize_bsd_uthread prototype. * btrace.c: Remove _initialize_btrace prototype. * charset.c: Remove _initialize_charset prototype. * cli/cli-cmds.c: Remove _initialize_cli_cmds prototype. * cli/cli-dump.c: Remove _initialize_cli_dump prototype. * cli/cli-interp.c: Remove _initialize_cli_interp prototype. * cli/cli-logging.c: Remove _initialize_cli_logging prototype. * cli/cli-script.c: Remove _initialize_cli_script prototype. * coff-pe-read.c: Remove _initialize_coff_pe_read prototype. * coffread.c: Remove _initialize_coffread prototype. * compile/compile.c: Remove _initialize_compile prototype. * complaints.c: Remove _initialize_complaints prototype. * completer.c: Remove _initialize_completer prototype. * copying.awk: Remove _initialize_copying prototype. * copying.c: Regenerate. * core-regset.c: Remove _initialize_core_regset prototype. * corefile.c: Remove _initialize_core prototype. * corelow.c: Remove _initialize_corelow prototype. * cp-abi.c: Remove _initialize_cp_abi prototype. * cp-namespace.c: Remove _initialize_cp_namespace prototype. * cp-support.c: Remove _initialize_cp_support prototype. * cp-valprint.c: Remove _initialize_cp_valprint prototype. * cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype. * cris-tdep.c: Remove _initialize_cris_tdep prototype. * ctf.c: Remove _initialize_ctf prototype. * d-lang.c: Remove _initialize_d_language prototype. * darwin-nat-info.c: Remove _initialize_darwin_info_commands prototype. * darwin-nat.c: Remove _initialize_darwin_inferior prototype. * dbxread.c: Remove _initialize_dbxread prototype. * dcache.c: Remove _initialize_dcache prototype. * demangle.c: Remove _initialize_demangler prototype. * disasm-selftests.c: Remove _initialize_disasm_selftests prototype. * disasm.c: Remove _initialize_disasm prototype. * dtrace-probe.c: Remove _initialize_dtrace_probe prototype. * dummy-frame.c: Remove _initialize_dummy_frame prototype. * dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame prototype. * dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype. * dwarf2expr.c: Remove _initialize_dwarf2expr prototype. * dwarf2loc.c: Remove _initialize_dwarf2loc prototype. * dwarf2read.c: Remove _initialize_dwarf2_read prototype. * elfread.c: Remove _initialize_elfread prototype. * exec.c: Remove _initialize_exec prototype. * extension.c: Remove _initialize_extension prototype. * f-lang.c: Remove _initialize_f_language prototype. * f-valprint.c: Remove _initialize_f_valprint prototype. * fbsd-nat.c: Remove _initialize_fbsd_nat prototype. * fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype. * filesystem.c: Remove _initialize_filesystem prototype. * findcmd.c: Remove _initialize_mem_search prototype. * fork-child.c: Remove _initialize_fork_child prototype. * frame-base.c: Remove _initialize_frame_base prototype. * frame-unwind.c: Remove _initialize_frame_unwind prototype. * frame.c: Remove _initialize_frame prototype. * frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype. * frv-tdep.c: Remove _initialize_frv_tdep prototype. * ft32-tdep.c: Remove _initialize_ft32_tdep prototype. * gcore.c: Remove _initialize_gcore prototype. * gdb_bfd.c: Remove _initialize_gdb_bfd prototype. * gdbarch.c: Regenerate. * gdbarch.sh: Remove _initialize_gdbarch prototype. * gdbtypes.c: Remove _initialize_gdbtypes prototype. * gnu-nat.c: Remove _initialize_gnu_nat prototype. * gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype. * gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype. * go-lang.c: Remove _initialize_go_language prototype. * go32-nat.c: Remove _initialize_go32_nat prototype. * guile/guile.c: Remove _initialize_guile prototype. * h8300-tdep.c: Remove _initialize_h8300_tdep prototype. * hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype. * hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype. * hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype. * hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype. * hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype. * hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype. * hppa-tdep.c: Remove _initialize_hppa_tdep prototype. * i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype. * i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep prototype. * i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep prototype. * i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype. * i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype. * i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype. * i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype. * i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype. * i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype. * i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype. * i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype. * i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype. * i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype. * i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype. * i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype. * i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype. * i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * i386-tdep.c: Remove _initialize_i386_tdep prototype. * i386-windows-nat.c: Remove _initialize_i386_windows_nat prototype. * ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame prototype. * ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype. * ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype. * ia64-tdep.c: Remove _initialize_ia64_tdep prototype. * ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype. * infcall.c: Remove _initialize_infcall prototype. * infcmd.c: Remove _initialize_infcmd prototype. * inferior.c: Remove _initialize_inferiors prototype. * inflow.c: Remove _initialize_inflow prototype. * infrun.c: Remove _initialize_infrun prototype. * interps.c: Remove _initialize_interpreter prototype. * iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype. * jit.c: Remove _initialize_jit prototype. * language.c: Remove _initialize_language prototype. * linux-fork.c: Remove _initialize_linux_fork prototype. * linux-nat.c: Remove _initialize_linux_nat prototype. * linux-tdep.c: Remove _initialize_linux_tdep prototype. * linux-thread-db.c: Remove _initialize_thread_db prototype. * lm32-tdep.c: Remove _initialize_lm32_tdep prototype. * m2-lang.c: Remove _initialize_m2_language prototype. * m32c-tdep.c: Remove _initialize_m32c_tdep prototype. * m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype. * m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype. * m32r-tdep.c: Remove _initialize_m32r_tdep prototype. * m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype. * m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-tdep.c: Remove _initialize_m68k_tdep prototype. * m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * machoread.c: Remove _initialize_machoread prototype. * macrocmd.c: Remove _initialize_macrocmd prototype. * macroscope.c: Remove _initialize_macroscope prototype. * maint.c: Remove _initialize_maint_cmds prototype. * mdebugread.c: Remove _initialize_mdebugread prototype. * memattr.c: Remove _initialize_mem prototype. * mep-tdep.c: Remove _initialize_mep_tdep prototype. * mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype. * mi/mi-cmds.c: Remove _initialize_mi_cmds prototype. * mi/mi-interp.c: Remove _initialize_mi_interp prototype. * mi/mi-main.c: Remove _initialize_mi_main prototype. * microblaze-linux-tdep.c: Remove _initialize_microblaze_linux_tdep prototype. * microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype. * mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype. * mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype. * mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype. * mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype. * mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype. * mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype. * mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype. * mips-tdep.c: Remove _initialize_mips_tdep prototype. * mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype. * mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep prototype. * mipsread.c: Remove _initialize_mipsread prototype. * mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep prototype. * mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype. * moxie-tdep.c: Remove _initialize_moxie_tdep prototype. * msp430-tdep.c: Remove _initialize_msp430_tdep prototype. * mt-tdep.c: Remove _initialize_mt_tdep prototype. * nds32-tdep.c: Remove _initialize_nds32_tdep prototype. * nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep prototype. * nios2-tdep.c: Remove _initialize_nios2_tdep prototype. * nto-procfs.c: Remove _initialize_procfs prototype. * nto-tdep.c: Remove _initialize_nto_tdep prototype. * objc-lang.c: Remove _initialize_objc_language prototype. * objfiles.c: Remove _initialize_objfiles prototype. * observer.c: Remove observer_test_first_notification_function, observer_test_second_notification_function, observer_test_third_notification_function, and _initialize_observer prototypes. * opencl-lang.c: Remove _initialize_opencl_language prototypes. * osabi.c: Remove _initialize_gdb_osabi prototype. * osdata.c: Remove _initialize_osdata prototype. * p-valprint.c: Remove _initialize_pascal_valprint prototype. * parse.c: Remove _initialize_parse prototype. * ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype. * ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype. * ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype. * ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype. * ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype. * ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype. * ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype. * ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype. * printcmd.c: Remove _initialize_printcmd prototype. * probe.c: Remove _initialize_probe prototype. * proc-api.c: Remove _initialize_proc_api prototype. * proc-events.c: Remove _initialize_proc_events prototype. * proc-service.c: Remove _initialize_proc_service prototype. * procfs.c: Remove _initialize_procfs prototype. * psymtab.c: Remove _initialize_psymtab prototype. * python/python.c: Remove _initialize_python prototype. * ravenscar-thread.c: Remove _initialize_ravenscar prototype. * record-btrace.c: Remove _initialize_record_btrace prototype. * record-full.c: Remove _initialize_record_full prototype. * record.c: Remove _initialize_record prototype. * regcache.c: Remove _initialize_regcache prototype. * reggroups.c: Remove _initialize_reggroup prototype. * remote-notif.c: Remove _initialize_notif prototype. * remote-sim.c: Remove _initialize_remote_sim prototype. * remote.c: Remove _initialize_remote prototype. * reverse.c: Remove _initialize_reverse prototype. * rl78-tdep.c: Remove _initialize_rl78_tdep prototype. * rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype. * rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep prototype. * rs6000-nat.c: Remove _initialize_rs6000_nat prototype. * rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype. * rust-exp.y: Remove _initialize_rust_exp prototype. * rx-tdep.c: Remove _initialize_rx_tdep prototype. * s390-linux-nat.c: Remove _initialize_s390_nat prototype. * s390-linux-tdep.c: Remove _initialize_s390_tdep prototype. * score-tdep.c: Remove _initialize_score_tdep prototype. * selftest-arch.c: Remove _initialize_selftests_foreach_arch prototype. * ser-go32.c: Remove _initialize_ser_dos prototype. * ser-mingw.c: Remove _initialize_ser_windows prototype. * ser-pipe.c: Remove _initialize_ser_pipe prototype. * ser-tcp.c: Remove _initialize_ser_tcp prototype. * ser-unix.c: Remove _initialize_ser_hardwire prototype. * serial.c: Remove _initialize_serial prototype. * sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype. * sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype. * sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype. * sh-tdep.c: Remove _initialize_sh_tdep prototype. * skip.c: Remove _initialize_step_skip prototype. * sol-thread.c: Remove _initialize_sol_thread prototype. * solib-aix.c: Remove _initialize_solib_aix prototype. * solib-darwin.c: Remove _initialize_darwin_solib prototype. * solib-dsbt.c: Remove _initialize_dsbt_solib prototype. * solib-frv.c: Remove _initialize_frv_solib prototype. * solib-spu.c: Remove _initialize_spu_solib prototype. * solib-svr4.c: Remove _initialize_svr4_solib prototype. * solib-target.c: Remove _initialize_solib_target prototype. * solib.c: Remove _initialize_solib prototype. * source.c: Remove _initialize_source prototype. * sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype. * sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep prototype. * sparc-nat.c: Remove _initialize_sparc_nat prototype. * sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype. * sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype. * sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep prototype. * sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype. * sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype. * sparc-tdep.c: Remove _initialize_sparc_tdep prototype. * sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat prototype. * sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep prototype. * sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat prototype. * sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep prototype. * sparc64-nat.c: Remove _initialize_sparc64_nat prototype. * sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat prototype. * sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep prototype. * sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat prototype. * sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep prototype. * sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep prototype. * spu-linux-nat.c: Remove _initialize_spu_nat prototype. * spu-multiarch.c: Remove _initialize_spu_multiarch prototype. * spu-tdep.c: Remove _initialize_spu_tdep prototype. * stabsread.c: Remove _initialize_stabsread prototype. * stack.c: Remove _initialize_stack prototype. * stap-probe.c: Remove _initialize_stap_probe prototype. * std-regs.c: Remove _initialize_frame_reg prototype. * symfile-debug.c: Remove _initialize_symfile_debug prototype. * symfile-mem.c: Remove _initialize_symfile_mem prototype. * symfile.c: Remove _initialize_symfile prototype. * symmisc.c: Remove _initialize_symmisc prototype. * symtab.c: Remove _initialize_symtab prototype. * target-dcache.c: Remove _initialize_target_dcache prototype. * target-descriptions.c: Remove _initialize_target_descriptions prototype. * thread.c: Remove _initialize_thread prototype. * tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep prototype. * tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype. * tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype. * tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep prototype. * tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype. * tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype. * tracefile.c: Remove _initialize_tracefile prototype. * tracepoint.c: Remove _initialize_tracepoint prototype. * tui/tui-hooks.c: Remove _initialize_tui_hooks prototype. * tui/tui-interp.c: Remove _initialize_tui_interp prototype. * tui/tui-layout.c: Remove _initialize_tui_layout prototype. * tui/tui-regs.c: Remove _initialize_tui_regs prototype. * tui/tui-stack.c: Remove _initialize_tui_stack prototype. * tui/tui-win.c: Remove _initialize_tui_win prototype. * tui/tui.c: Remove _initialize_tui prototype. * typeprint.c: Remove _initialize_typeprint prototype. * user-regs.c: Remove _initialize_user_regs prototype. * utils.c: Remove _initialize_utils prototype. * v850-tdep.c: Remove _initialize_v850_tdep prototype. * valarith.c: Remove _initialize_valarith prototype. * valops.c: Remove _initialize_valops prototype. * valprint.c: Remove _initialize_valprint prototype. * value.c: Remove _initialize_values prototype. * varobj.c: Remove _initialize_varobj prototype. * vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype. * vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype. * vax-tdep.c: Remove _initialize_vax_tdep prototype. * windows-nat.c: Remove _initialize_windows_nat, _initialize_check_for_gdb_ini, and _initialize_loadable prototypes. * windows-tdep.c: Remove _initialize_windows_tdep prototype. * xcoffread.c: Remove _initialize_xcoffread prototype. * xml-support.c: Remove _initialize_xml_support prototype. * xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype. * xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat prototype. * xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep prototype. * xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype. |
||
|
Pedro Alves
|
51abb42130 |
Kill init_sal
Instead, make symtab_and_line initialize its members itself. Many symtab_and_line declarations are moved to where the object is initialized at the same time both for clarity and to avoid double initialization. A few functions, like e.g., find_frame_sal are adjusted to return the sal using normal function return instead of an output parameter likewise to avoid having to default-construct a sal and then immediately have the object overwritten. gdb/ChangeLog: 2017-09-04 Pedro Alves <palves@redhat.com> * ada-lang.c (is_known_support_routine): Move sal declaration to where it is initialized. * breakpoint.c (create_internal_breakpoint, init_catchpoint) (parse_breakpoint_sals, decode_static_tracepoint_spec) (clear_command, update_static_tracepoint): Remove init_sal references. Move declarations closer to initializations. * cli/cli-cmds.c (list_command): Move sal declarations closer to initializations. * elfread.c (elf_gnu_ifunc_resolver_stop): Remove init_sal references. Move sal declarations closer to initializations. * frame.c (find_frame_sal): Return a symtab_and_line via function return instead of output parameter. Remove init_sal references. * frame.h (find_frame_sal): Return a symtab_and_line via function return instead of output parameter. * guile/scm-frame.c (gdbscm_frame_sal): Adjust. * guile/scm-symtab.c (stscm_make_sal_smob): Use in-place new instead of memset. (gdbscm_find_pc_line): Remove init_sal reference. * infcall.c (call_function_by_hand_dummy): Remove init_sal references. Move declarations closer to initializations. * infcmd.c (set_step_frame): Update. Move declarations closer to initializations. (finish_backward): Remove init_sal references. Move declarations closer to initializations. * infrun.c (process_event_stop_test, handle_step_into_function) (insert_hp_step_resume_breakpoint_at_frame) (insert_step_resume_breakpoint_at_caller): Likewise. * linespec.c (create_sals_line_offset, decode_digits_ordinary) (symbol_to_sal): Likewise. * probe.c (parse_probes_in_pspace): Remove init_sal reference. * python/py-frame.c (frapy_find_sal): Move sal declaration closer to its initialization. * reverse.c (save_bookmark_command): Use new/delete. Remove init_sal references. Move declarations closer to initializations. * source.c (get_current_source_symtab_and_line): Remove brace initialization. (set_current_source_symtab_and_line): Now takes the sal by const reference. Remove brace initialization. (line_info): Remove init_sal reference. * source.h (set_current_source_symtab_and_line): Now takes a symtab_and_line via const reference. * stack.c (set_current_sal_from_frame): Adjust. (print_frame_info): Adjust. (get_last_displayed_sal): Return the sal via function return instead of via output parameter. Simplify. (frame_info): Adjust. * stack.h (get_last_displayed_sal): Return the sal via function return instead of via output parameter. * symtab.c (init_sal): Delete. (find_pc_sect_line): Remove init_sal references. Move declarations closer to initializations. (find_function_start_sal): Remove init_sal references. Move declarations closer to initializations. * symtab.h (struct symtab_and_line): In-class initialize all fields. * tracepoint.c (set_traceframe_context) (print_one_static_tracepoint_marker): Remove init_sal references. Move declarations closer to initializations. * tui/tui-disasm.c (tui_show_disassem_and_update_source): Adjust. * tui/tui-stack.c (tui_show_frame_info): Adjust. Move declarations closer to initializations. * tui/tui-winsource.c (tui_update_source_window_as_is): Remove init_sal references. Adjust. |
||
|
Pedro Alves
|
6c5b2ebeac |
struct symtabs_and_lines -> std::vector<symtab_and_line>
This replaces "struct symtabs_and_lines" with std::vector<symtab_and_line> in most cases. This removes a number of cleanups. In some cases, the sals objects do not own the sals they point at. Instead they point at some sal that lives on the stack. Typically something like this: struct symtab_and_line sal; struct symtabs_and_lines sals; // fill in sal sals.nelts = 1; sals.sals = &sal; // use sals Instead of switching those cases to std::vector too, such usages are replaced by gdb::array_view<symtab_and_line> instead. This avoids introducing heap allocations. gdb/ChangeLog: 2017-09-04 Pedro Alves <palves@redhat.com> * ax-gdb.c (agent_command_1): Use range-for. * break-catch-throw.c (re_set_exception_catchpoint): Update. * breakpoint.c: Include "common/array-view.h". (init_breakpoint_sal, create_breakpoint_sal): Change sals parameter from struct symtabs_and_lines to array_view<symtab_and_line>. Adjust. Use range-for. Update. (breakpoint_sals_to_pc): Change sals parameter from struct symtabs_and_lines to std::vector reference. (check_fast_tracepoint_sals): Change sals parameter from struct symtabs_and_lines to std::array_view. Use range-for. (decode_static_tracepoint_spec): Return a std::vector instead of symtabs_and_lines. Update. (create_breakpoint): Update. (break_range_command, until_break_command, clear_command): Update. (base_breakpoint_decode_location, bkpt_decode_location) (bkpt_probe_create_sals_from_location) (bkpt_probe_decode_location, tracepoint_decode_location) (tracepoint_probe_decode_location) (strace_marker_create_sals_from_location): Return a std::vector instead of symtabs_and_lines. (strace_marker_create_breakpoints_sal): Update. (strace_marker_decode_location): Return a std::vector instead of symtabs_and_lines. Update. (update_breakpoint_locations): Change struct symtabs_and_lines parameters to gdb::array_view. Adjust. (location_to_sals): Return a std::vector instead of symtabs_and_lines. Update. (breakpoint_re_set_default): Use std::vector instead of struct symtabs_and_lines. (decode_location_default): Return a std::vector instead of symtabs_and_lines. Update. * breakpoint.h: Include "common/array-view.h". (struct breakpoint_ops) <decode_location>: Now returns a std::vector instead of returning a symtabs_and_lines via output parameter. (update_breakpoint_locations): Change sals parameters to use gdb::array_view. * cli/cli-cmds.c (edit_command, list_command): Update to use std::vector and gdb::array_view. (ambiguous_line_spec): Adjust to use gdb::array_view and range-for. (compare_symtabs): Rename to ... (cmp_symtabs): ... this. Change parameters to symtab_and_line const reference and adjust. (filter_sals): Rewrite using std::vector and standard algorithms. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify. (jump_command): Update to use std::vector. * linespec.c (struct linespec_state) <canonical_names>: Update comment. (add_sal_to_sals_basic): Delete. (add_sal_to_sals, filter_results, convert_results_to_lsals) (decode_line_2, create_sals_line_offset) (convert_address_location_to_sals, convert_linespec_to_sals) (convert_explicit_location_to_sals, parse_linespec) (event_location_to_sals, decode_line_full, decode_line_1) (decode_line_with_current_source) (decode_line_with_last_displayed, decode_objc) (decode_digits_list_mode, decode_digits_ordinary, minsym_found) (linespec_result::~linespec_result): Adjust to use std::vector instead of symtabs_and_lines. * linespec.h (linespec_sals::sals): Now a std::vector. (struct linespec_result): Use std::vector, bool, and in-class initialization. (decode_line_1, decode_line_with_current_source) (decode_line_with_last_displayed): Return std::vector. * macrocmd.c (info_macros_command): Use std::vector. * mi/mi-main.c (mi_cmd_trace_find): Use std::vector. * probe.c (parse_probes_in_pspace, parse_probes): Adjust to use std::vector. * probe.h (parse_probes): Return a std::vector. * python/python.c (gdbpy_decode_line): Use std::vector and gdb::array_view. * source.c (select_source_symtab, line_info): Use std::vector. * stack.c (func_command): Use std::vector. * symtab.h (struct symtabs_and_lines): Delete. * tracepoint.c (tfind_line_command, scope_info): Use std::vector. |
||
|
Simon Marchi
|
11db943032 |
Rename some command functions
This patch renames a few functions implementing CLI commands to follow the style <command-name>_command, so that they are easier to search for. gdb/ChangeLog: * breakpoint.c (breakpoints_info): Rename to ... (info_breakpoints_command): ... this. (watchpoints_info): Rename to ... (info_watchpoints_command): ... this. (tracepoints_info): Rename to ... (info_tracepoints_command): ... this. (_initialize_breakpoint): Adjust. * dcache.c (dcache_info): Rename to ... (info_display_command): ... this. (_initialize_dcache): Adjust. * frame.h (args_info): Rename to ... (info_args_command): ... this. (locals_info): Rename to ... (info_locals_command): ... this. * infcmd.c (nofp_registers_info): Rename to ... (info_registers_command): ... this. (float_info): Rename to ... (info_float_command): ... this. (program_info): Rename to ... (info_program_command): ... this. (all_registers_info): Rename to ... (info_all_registers_command): ... this. (vector_info): Rename to ... (info_vector_command): ... this. (float_info): Rename to ... (info_float_command): ... this. (_initialize_infcmd): Adjust. * inferior.h (term_info): Rename to ... (info_terminal_command): ... this. * inflow.c (term_info): Rename to ... (info_terminal_command): ... this. (_initialize_inflow): Adjust. * infrun.c (signals_info): Rename to ... (info_signals_command): ... this. (_initialize_infrun): Adjust. * objc-lang.c (classes_info): Rename to ... (info_classes_command): ... this. (selectors_info): Rename to ... (info_selectors_command): ... this. (_initialize_objc_language): Adjust. * printcmd.c (sym_info): Rename to ... (info_symbol_command): ... this. (address_info): Rename to ... (info_address_command): ... this. (display_info): Rename to ... (info_display_command): ... this. (_initialize_printcmd): Adjust. * reverse.c (bookmarks_info): Rename to ... (info_breakpoints_command): ... this. (_initialize_reverse): Adjust. * ser-go32.c (dos_info): Rename to ... (info_serial_command): ... this. (_initialize_ser_dos): Adjust. * skip.c (skip_info): Rename to ... (info_skip_command): ... this. (_initialize_step_skip): Adjust. * source.c (line_info): Rename to ... (info_line_command): ... this. (source_info): Rename to ... (info_source_command) * stack.c (frame_info): Rename to ... (info_frame_command): ... this. (locals_info): Rename to ... (info_locals_command): ... this. (args_info): Rename to ... (info_args_command): ... this. (_initialize_stack): Adjust. * symtab.c (sources_info): Rename to ... (info_sources_command): ... this. (variables_info): Rename to ... (info_variables_command): ... this. (functions_info): Rename to ... (info_functions_command): ... this. (types_info): Rename to ... (info_types_command): ... this. (_initialize_symtab): Adjust. * target.c (target_info): Rename to ... (info_target_command): ... this. (initialize_targets): Adjust. * tracepoint.c (tvariables_info): Rename to ... (info_tvariables_command): ... this. (scope_info): Rename to ... (info_scope_command): ... this. (trace_dump_actions): Adjust. (_initialize_tracepoint): Adjust. |
||
|
Sergio Durigan Junior
|
206726fbfd |
Fix PR gdb/21954: make 'unset environment' work again
When I made commit
|
||
|
Sergio Durigan Junior
|
9a6c7d9c02 |
C++ify gdb/common/environ.c
As part of the preparation necessary for my upcoming task, I'd like to propose that we turn gdb_environ into a class. The approach taken here is simple: the class gdb_environ contains everything that is needed to manipulate the environment variables. These variables are stored in an std::vector<char *>, which can be converted to a 'char **' and passed as argument to functions that need it. The usage has not changed much. As per Pedro's suggestion, this class uses a static factory method initialization. This means that when an instance is created, it is initially empty. When needed, it has to be initialized using the static method 'from_host_environ'. As mentioned before, this is a preparation for an upcoming work that I will be posting in the next few weeks or so. For that work, I'll probably create another data structure that will contain all the environment variables that were set by the user using the 'set environment' command, because I'll need access to them. This will be much easier with the class-ification of gdb_environ. As noted, this has been regression-tested with the new version of environ.exp and no regressions were found. gdb/ChangeLog: 2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/environ-selftests.c'. (SUBDIR_UNITTESTS_OBS): Add 'environ-selftests.o'. * charset.c (find_charset_names): Declare object 'iconv_env'. Update code to use 'iconv_env' object. Remove call to 'free_environ'. * common/environ.c: Include <utility>. (make_environ): Delete function. (free_environ): Delete function. (gdb_environ::clear): New function. (gdb_environ::operator=): New function. (gdb_environ::get): Likewise. (environ_vector): Delete function. (set_in_environ): Delete function. (gdb_environ::set): New function. (unset_in_environ): Delete function. (gdb_environ::unset): New function. (gdb_environ::envp): Likewise. * common/environ.h: Include <vector>. (struct gdb_environ): Delete; transform into... (class gdb_environ): ... this class. (free_environ): Delete prototype. (init_environ, get_in_environ, set_in_environ, unset_in_environ, environ_vector): Likewise. * infcmd.c (run_command_1): Update code to call 'envp' from 'gdb_environ' class. (environment_info): Update code to call methods from 'gdb_environ' class. (unset_environment_command): Likewise. (path_info): Likewise. (path_command): Likewise. * inferior.c (inferior::~inferior): Delete call to 'free_environ'. (inferior::inferior): Initialize 'environment' using the host's information. * inferior.h: Remove forward declaration of 'struct gdb_environ'. Include "environ.h". (class inferior) <environment>: Change type from 'struct gdb_environ' to 'gdb_environ'. * mi/mi-cmd-env.c (mi_cmd_env_path): Update code to call methods from 'gdb_environ' class. * solib.c (solib_find_1): Likewise * unittests/environ-selftests.c: New file. gdb/gdbserver/ChangeLog: 2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com> * linux-low.c (linux_create_inferior): Adjust code to access the environment information via 'gdb_environ' class. * lynx-low.c (lynx_create_inferior): Likewise. * server.c (our_environ): Make it an instance of 'gdb_environ'. (get_environ): Return a pointer to 'our_environ'. (captured_main): Initialize 'our_environ'. * server.h (get_environ): Adjust prototype. * spu-low.c (spu_create_inferior): Adjust code to access the environment information via 'gdb_environ' class. |
||
|
Sergio Durigan Junior
|
45159d6ad3 |
PR gdb/21574: Mention $SHELL and startup-with-shell on "help run"
This simple patch updates the documentation of "help run" in order to mention that the shell used to start the inferior comes from the $SHELL environment variable. It also mentions that this behaviour can be disabled by using the "set startup-with-shell off" command. gdb/ChangeLog: 2017-06-14 Sergio Durigan Junior <sergiodj@redhat.com> PR gdb/21574 * infcmd.c (_initialize_infcmd): Expand "help run" documentation to mention $SHELL and startup-with-shell. |
||
|
Tom Tromey
|
30a254669b |
Don't always zero pad in print_*_chars
This changes print_octal_chars and print_decimal_chars to never zero pad, and changes print_binary_chars and print_hex_chars to only optionally zero-pad, based on a flag. ChangeLog 2017-06-12 Tom Tromey <tom@tromey.com> PR exp/16225: * valprint.h (print_binary_chars, print_hex_chars): Update. * valprint.c (val_print_type_code_int): Update. (print_binary_chars): Add "zero_pad" argument. (emit_octal_digit): New function. (print_octal_chars): Don't zero-pad. (print_decimal_chars): Likewise. (print_hex_chars): Add "zero_pad" argument. * sh64-tdep.c (sh64_do_fp_register): Update. * regcache.c (regcache::dump): Update. * printcmd.c (print_scalar_formatted): Update. * infcmd.c (default_print_one_register_info): Update. 2017-06-12 Tom Tromey <tom@tromey.com> PR exp/16225: * gdb.reverse/i386-sse-reverse.exp: Update tests. * gdb.arch/vsx-regs.exp: Update tests. * gdb.arch/s390-vregs.exp (hex128): New proc. Update test. * gdb.arch/altivec-regs.exp: Update tests. |
||
|
Yao Qi
|
21873064e8 |
Add alias command to cmd_list_element
When we add alias command, we call add_alias_cmd and pass the alias name
and command name. This implicitly requires the command and its prefix
commands are already added to cmdlist. This may not be true, for example,
add_com_alias ("tty", "set inferior-tty", class_alias, 0);
"inferior-tty" command is added to setlist, but setlist may not be added
to cmdlist (It depends on the order of related _initialize_XXX functions
called) so that we can't find "set inferior-tty" from cmdlist.
This patch fixes this problem by passing cmd_list_element of "inferior-tty"
to add_alias_cmd, so that cmd_list_element of "inferior-tty" doesn't have
to be reachable from cmdlist at that moment.
gdb:
2017-05-17 Yao Qi <yao.qi@linaro.org>
* cli/cli-decode.c (add_alias_cmd): New function.
* command.h (add_alias_cmd): Declare.
* infcmd.c (_initialize_infcmd): Don't call add_com_alias,
instead call add_alias_cmd.
gdb/testsuite:
2017-05-17 Simon Marchi <simon.marchi@ericsson.com>
* gdb.base/set-inferior-tty.exp (test_set_inferior_tty): Add
argument command.
(top-level): Invoke test_set_inferior_tty.
|
||
|
Pedro Alves
|
5ed8105e02 |
RAII-fy make_cleanup_restore_current_thread & friends
After all the make_cleanup_restore_current_thread fixing, I thought I'd convert that and its relatives (which are all cleanups) to RAII classes. scoped_restore_current_pspace_and_thread was put in a separate file to avoid a circular dependency. Tested on x86-64 Fedora 23, native and gdbserver. gdb/ChangeLog: 2017-05-04 Pedro Alves <palves@redhat.com> * Makefile.in (SFILES): Add progspace-and-thread.c. (HFILES_NO_SRCDIR): Add progspace-and-thread.h. (COMMON_OBS): Add progspace-and-thread.o. * breakpoint.c: Include "progspace-and-thread.h". (update_inserted_breakpoint_locations) (insert_breakpoint_locations, create_longjmp_master_breakpoint): Use scoped_restore_current_pspace_and_thread. (create_std_terminate_master_breakpoint): Use scoped_restore_current_program_space. (remove_breakpoint): Use scoped_restore_current_pspace_and_thread. (print_breakpoint_location): Use scoped_restore_current_program_space. (bp_loc_is_permanent): Use scoped_restore_current_pspace_and_thread. (resolve_sal_pc): Use scoped_restore_current_pspace_and_thread. (download_tracepoint_locations): Use scoped_restore_current_pspace_and_thread. (breakpoint_re_set): Use scoped_restore_current_pspace_and_thread. * exec.c (exec_close_1): Use scoped_restore_current_program_space. (enum step_over_calls_kind): Moved from inferior.h. (class scoped_restore_current_thread): New class. * gdbthread.h (make_cleanup_restore_current_thread): Delete declaration. (scoped_restore_current_thread): New class. * infcmd.c: Include "common/gdb_optional.h". (continue_1, proceed_after_attach): Use scoped_restore_current_thread. (notice_new_inferior): Use scoped_restore_current_thread. * inferior.c: Include "progspace-and-thread.h". (restore_inferior, save_current_inferior): Delete. (add_inferior_command, clone_inferior_command): Use scoped_restore_current_pspace_and_thread. * inferior.h (scoped_restore_current_inferior): New class. * infrun.c: Include "progspace-and-thread.h" and "common/gdb_optional.h". (follow_fork_inferior): Use scoped_restore_current_pspace_and_thread. (scoped_restore_exited_inferior): New class. (handle_vfork_child_exec_or_exit): Use scoped_restore_exited_inferior, scoped_restore_current_pspace_and_thread, scoped_restore_current_thread and scoped_restore. (fetch_inferior_event): Use scoped_restore_current_thread. * linespec.c (decode_line_full, decode_line_1): Use scoped_restore_current_program_space. * mi/mi-main.c: Include "progspace-and-thread.h". (exec_continue): Use scoped_restore_current_thread. (mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread. (mi_cmd_trace_frame_collected): Use scoped_restore_current_thread. * proc-service.c (ps_pglobal_lookup): Use scoped_restore_current_program_space. * progspace-and-thread.c: New file. * progspace-and-thread.h: New file. * progspace.c (release_program_space, clone_program_space): Use scoped_restore_current_program_space. (restore_program_space, save_current_program_space) (save_current_space_and_thread): Delete. (switch_to_program_space_and_thread): Moved to progspace-and-thread.c. * progspace.h (save_current_program_space) (save_current_space_and_thread): Delete declarations. (scoped_restore_current_program_space): New class. * remote.c (remote_btrace_maybe_reopen): Use scoped_restore_current_thread. * symtab.c: Include "progspace-and-thread.h". (skip_prologue_sal): Use scoped_restore_current_pspace_and_thread. * thread.c (print_thread_info_1): Use scoped_restore_current_thread. (struct current_thread_cleanup): Delete. (do_restore_current_thread_cleanup) (restore_current_thread_cleanup_dtor): Rename/convert both to ... (scoped_restore_current_thread::~scoped_restore_current_thread): ... this new dtor. (make_cleanup_restore_current_thread): Rename/convert to ... (scoped_restore_current_thread::scoped_restore_current_thread): ... this new ctor. (thread_apply_all_command): Use scoped_restore_current_thread. (thread_apply_command): Use scoped_restore_current_thread. * tracepoint.c (tdump_command): Use scoped_restore_current_thread. * varobj.c (value_of_root_1): Use scoped_restore_current_thread. |
||
|
Yao Qi
|
0749542484 |
Remove cleanup in get_return_value
With regcache ctor, we can use it to create local object in get_return_value (), so that the cleanup can be removed. gdb: 2017-04-28 Yao Qi <yao.qi@linaro.org> * infcmd.c (get_return_value): Use regcache ctor, and remove cleanup. |
||
|
Sergio Durigan Junior
|
7c5ded6a00 |
C++-fy and prepare for sharing fork_inferior
As a preparation for the next patch, which will move fork_inferior from GDB to common/ (and therefore share it with gdbserver), it is interesting to convert a few functions to C++. This patch touches functions related to parsing command-line arguments to the inferior (see gdb/fork-child.c:breakup_args), the way the arguments are stored on fork_inferior (using std::vector instead of char **), and the code responsible for dealing with argv also on gdbserver. I've taken this opportunity and decided to constify a few arguments to fork_inferior/create_inferior as well, in order to make the code cleaner. And now, on gdbserver, we're using xstrdup everywhere and aren't checking for memory allocation failures anymore, as requested by Pedro: <https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html> Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com> Pedro Alves wrote: > On the "== NULL" check: IIUC, the old NULL check was there to > handle strdup returning NULL due to out-of-memory. > See NULL checks and comments further above in this function. > Now that you're using a std::vector, that doesn't work or make > sense any longer, since if push_back fails to allocate space for > its internal buffer (with operator new), our operator new replacement > (common/new-op.c) calls malloc_failure, which aborts gdbserver. > > Not sure it makes sense to handle out-of-memory specially in > the gdb/rsp-facing functions nowadays (maybe git blame/log/patch > submission for that code shows some guidelines). Maybe (or, probably) > it's OK to stop caring about it, but then we should consistently remove > left over code, by using xstrdup instead and remove the NULL checks. IMO this refactoring was very good to increase the readability of the code as well, because some parts of the argument handling were unnecessarily confusing before. gdb/ChangeLog: 2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com> * common/common-utils.c (free_vector_argv): New function. * common/common-utils.h: Include <vector>. (free_vector_argv): New prototype. * darwin-nat.c (darwin_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * fork-child.c: Include <vector>. (breakup_args): Rewrite function, using C++. (fork_inferior): Rewrite function header, constify "exec_file_arg" and accept "std::string" for "allargs". Update the code to calculate "argv" based on "allargs". Update calls to "exec_fun" and "execvp". * gnu-nat.c (gnu_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * go32-nat.c (go32_create_inferior): Likewise. * inf-ptrace.c (inf_ptrace_create_inferior): Likewise. * infcmd.c (run_command_1): Constify "exec_file". Use "std::string" for inferior arguments. * inferior.h (fork_inferior): Update prototype. * linux-nat.c (linux_nat_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * nto-procfs.c (procfs_create_inferior): Likewise. * procfs.c (procfs_create_inferior): Likewise. * remote-sim.c (gdbsim_create_inferior): Likewise. * remote.c (extended_remote_run): Update code to accept "std::string" as argument. (extended_remote_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * rs6000-nat.c (super_create_inferior): Likewise. (rs6000_create_inferior): Likewise. * target.h (struct target_ops) <to_create_inferior>: Likewise. * windows-nat.c (windows_create_inferior): Likewise. gdb/gdbserver/ChangeLog: 2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com> * server.c: Include <vector>. <program_argv, wrapper_argv>: Convert to std::vector. (start_inferior): Rewrite function to use C++. (handle_v_run): Likewise. Update code that calculates the argv based on the vRun packet; use C++. (captured_main): Likewise. |
||
|
Pedro Alves
|
a121b7c1ac |
-Wwrite-strings: The Rest
This is the remainder boring constification that all looks more of less borderline obvious IMO. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * ada-exp.y (yyerror): Constify. * ada-lang.c (bound_name, get_selections) (ada_variant_discrim_type) (ada_variant_discrim_name, ada_value_struct_elt) (ada_lookup_struct_elt_type, is_unchecked_variant) (ada_which_variant_applies, standard_exc, ada_get_next_arg) (catch_ada_exception_command_split) (catch_ada_assert_command_split, catch_assert_command) (ada_op_name): Constify. * ada-lang.h (ada_yyerror, get_selections) (ada_variant_discrim_name, ada_value_struct_elt): Constify. * arc-tdep.c (arc_print_frame_cache): Constify. * arm-tdep.c (arm_skip_stub): Constify. * ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref) (gen_aggregate_elt_ref): Constify. * bcache.c (print_bcache_statistics): Constify. * bcache.h (print_bcache_statistics): Constify. * break-catch-throw.c (catch_exception_command_1): * breakpoint.c (struct ep_type_description::description): Constify. (add_solib_catchpoint): Constify. (catch_fork_command_1): Add cast. (add_catch_command): Constify. * breakpoint.h (add_catch_command, add_solib_catchpoint): Constify. * bsd-uthread.c (bsd_uthread_state): Constify. * buildsym.c (patch_subfile_names): Constify. * buildsym.h (next_symbol_text_func, patch_subfile_names): Constify. * c-exp.y (yyerror): Constify. (token::oper): Constify. * c-lang.h (c_yyerror, cp_print_class_member): Constify. * c-varobj.c (cplus_describe_child): Constify. * charset.c (find_charset_names): Add cast. (find_charset_names): Constify array and add const_cast. * cli/cli-cmds.c (complete_command, cd_command): Constify. (edit_command): Constify. * cli/cli-decode.c (lookup_cmd): Constify. * cli/cli-dump.c (dump_memory_command, dump_value_command): Constify. (struct dump_context): Constify. (add_dump_command, restore_command): Constify. * cli/cli-script.c (get_command_line): Constify. * cli/cli-script.h (get_command_line): Constify. * cli/cli-utils.c (check_for_argument): Constify. * cli/cli-utils.h (check_for_argument): Constify. * coff-pe-read.c (struct read_pe_section_data): Constify. * command.h (lookup_cmd): Constify. * common/print-utils.c (decimal2str): Constify. * completer.c (gdb_print_filename): Constify. * corefile.c (set_gnutarget): Constify. * cp-name-parser.y (yyerror): Constify. * cp-valprint.c (cp_print_class_member): Constify. * cris-tdep.c (cris_register_name, crisv32_register_name): Constify. * d-exp.y (yyerror): Constify. (struct token::oper): Constify. * d-lang.h (d_yyerror): Constify. * dbxread.c (struct header_file_location::name): Constify. (add_old_header_file, add_new_header_file, last_function_name) (dbx_next_symbol_text, add_bincl_to_list) (find_corresponding_bincl_psymtab, set_namestring) (find_stab_function_addr, read_dbx_symtab, start_psymtab) (dbx_end_psymtab, read_ofile_symtab, process_one_symbol): * defs.h (command_line_input, print_address_symbolic) (deprecated_readline_begin_hook): Constify. * dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name): Constify. * event-top.c (handle_line_of_input): Constify and add cast. * exceptions.c (catch_errors): Constify. * exceptions.h (catch_errors): Constify. * expprint.c (print_subexp_standard, op_string, op_name) (op_name_standard, dump_raw_expression, dump_raw_expression): * expression.h (op_name, op_string, dump_raw_expression): Constify. * f-exp.y (yyerror): Constify. (struct token::oper): Constify. (struct f77_boolean_val::name): Constify. * f-lang.c (f_word_break_characters): Constify. * f-lang.h (f_yyerror): Constify. * fork-child.c (fork_inferior): Add cast. * frv-tdep.c (struct gdbarch_tdep::register_names): Constify. (new_variant): Constify. * gdbarch.sh (pstring_ptr, pstring_list): Constify. * gdbarch.c: Regenerate. * gdbcore.h (set_gnutarget): Constify. * go-exp.y (yyerror): Constify. (token::oper): Constify. * go-lang.h (go_yyerror): Constify. * go32-nat.c (go32_sysinfo): Constify. * guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * guile/scm-param.c (pascm_param_value): Constify. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Constify. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Constify. * ia64-tdep.c (ia64_register_names): Constify. * infcmd.c (construct_inferior_arguments): Constify. (path_command, attach_post_wait): Constify. * language.c (show_range_command, show_case_command) (unk_lang_error): Constify. * language.h (language_defn::la_error) (language_defn::la_name_of_this): Constify. * linespec.c (decode_line_2): Constify. * linux-thread-db.c (thread_db_err_str): Constify. * lm32-tdep.c (lm32_register_name): Constify. * m2-exp.y (yyerror): Constify. * m2-lang.h (m2_yyerror): Constify. * m32r-tdep.c (m32r_register_names): Constify and make static. * m68hc11-tdep.c (m68hc11_register_names): Constify. * m88k-tdep.c (m88k_register_name): Constify. * macroexp.c (appendmem): Constify. * mdebugread.c (fdr_name, add_data_symbol, parse_type) (upgrade_type, parse_external, parse_partial_symbols) (mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab) (new_symbol): Constify. * memattr.c (mem_info_command): Constify. * mep-tdep.c (register_name_from_keyword): Constify. * mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env): Constify. * mi/mi-cmd-stack.c (list_args_or_locals): Constify. * mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify. * mi/mi-main.c (captured_mi_execute_command): Constify and add cast. (mi_execute_async_cli_command): Constify. * mips-tdep.c (mips_register_name): Constify. * mn10300-tdep.c (register_name, mn10300_generic_register_name) (am33_register_name, am33_2_register_name) * moxie-tdep.c (moxie_register_names): Constify. * nat/linux-osdata.c (osdata_type): Constify fields. * nto-tdep.c (nto_parse_redirection): Constify. * objc-lang.c (lookup_struct_typedef, lookup_objc_class) (lookup_child_selector): Constify. (objc_methcall::name): Constify. * objc-lang.h (lookup_objc_class, lookup_child_selector) (lookup_struct_typedef): Constify. * objfiles.c (pc_in_section): Constify. * objfiles.h (pc_in_section): Constify. * p-exp.y (struct token::oper): Constify. (yyerror): Constify. * p-lang.h (pascal_yyerror): Constify. * parser-defs.h (op_name_standard): Constify. (op_print::string): Constify. (exp_descriptor::op_name): Constify. * printcmd.c (print_address_symbolic): Constify. * psymtab.c (print_partial_symbols): Constify. * python/py-breakpoint.c (stop_func): Constify. (bppy_get_expression): Constify. * python/py-cmd.c (cmdpy_completer::name): Constify. (cmdpy_function): Constify. * python/py-event.c (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-event.h (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-evts.c (add_new_registry): Constify. * python/py-finishbreakpoint.c (outofscope_func): Constify. * python/py-framefilter.c (get_py_iter_from_func): Constify. * python/py-inferior.c (get_buffer): Add cast. * python/py-param.c (parm_constant::name): Constify. * python/py-unwind.c (fprint_frame_id): Constify. * python/python.c (gdbpy_parameter_value): Constify. * remote-fileio.c (remote_fio_func_map): Make 'name' const. * remote.c (memory_packet_config::name): Constify. (show_packet_config_cmd, remote_write_bytes) (remote_buffer_add_string): * reverse.c (exec_reverse_once): Constify. * rs6000-tdep.c (variant::name, variant::description): Constify. * rust-exp.y (rustyyerror): Constify. * rust-lang.c (rust_op_name): Constify. * rust-lang.h (rustyyerror): Constify. * serial.h (serial_ops::name): Constify. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name) (sh_sh2a_register_name, sh_sh2a_nofpu_register_name) (sh_sh_dsp_register_name, sh_sh3_dsp_register_name) (sh_sh4_register_name, sh_sh4_nofpu_register_name) (sh_sh4al_dsp_register_name): Constify. * sh64-tdep.c (sh64_register_name): Constify. * solib-darwin.c (lookup_symbol_from_bfd): Constify. * spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify. * stabsread.c (patch_block_stabs, read_type_number) (ref_map::stabs, ref_add, process_reference) (symbol_reference_defined, define_symbol, define_symbol) (error_type, read_type, read_member_functions, read_cpp_abbrev) (read_one_struct_field, read_struct_fields, read_baseclasses) (read_tilde_fields, read_struct_type, read_array_type) (read_enum_type, read_sun_builtin_type, read_sun_floating_type) (read_huge_number, read_range_type, read_args, common_block_start) (find_name_end): Constify. * stabsread.h (common_block_start, define_symbol) (process_one_symbol, symbol_reference_defined, ref_add): * symfile.c (get_section_index, add_symbol_file_command): * symfile.h (get_section_index): Constify. * target-descriptions.c (tdesc_type::name): Constify. (tdesc_free_type): Add cast. * target.c (find_default_run_target): (add_deprecated_target_alias, find_default_run_target) (target_announce_detach): Constify. (do_option): Constify. * target.h (add_deprecated_target_alias): Constify. * thread.c (print_thread_info_1): Constify. * top.c (deprecated_readline_begin_hook, command_line_input): Constify. (init_main): Add casts. * top.h (handle_line_of_input): Constify. * tracefile-tfile.c (tfile_write_uploaded_tsv): Constify. * tracepoint.c (tvariables_info_1, trace_status_mi): Constify. (tfind_command): Rename to ... (tfind_command_1): ... this and constify. (tfind_command): New function. (tfind_end_command, tfind_start_command): Adjust. (encode_source_string): Constify. * tracepoint.h (encode_source_string): Constify. * tui/tui-data.c (tui_partial_win_by_name): Constify. * tui/tui-data.h (tui_partial_win_by_name): Constify. * tui/tui-source.c (tui_set_source_content_nil): Constify. * tui/tui-source.h (tui_set_source_content_nil): Constify. * tui/tui-win.c (parse_scrolling_args): Constify. * tui/tui-windata.c (tui_erase_data_content): Constify. * tui/tui-windata.h (tui_erase_data_content): Constify. * tui/tui-winsource.c (tui_erase_source_content): Constify. * tui/tui.c (tui_enable): Add cast. * utils.c (defaulted_query): Constify. (init_page_info): Add cast. (puts_debug, subset_compare): Constify. * utils.h (subset_compare): Constify. * varobj.c (varobj_format_string): Constify. * varobj.h (varobj_format_string): Constify. * vax-tdep.c (vax_register_name): Constify. * windows-nat.c (windows_detach): Constify. * xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify. * xml-support.c (gdb_xml_end_element): Constify. * xml-tdesc.c (tdesc_start_reg): Constify. * xstormy16-tdep.c (xstormy16_register_name): Constify. * xtensa-tdep.c (xtensa_find_register_by_name): Constify. * xtensa-tdep.h (xtensa_register_t::name): Constify. gdb/gdbserver/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * gdbreplay.c (sync_error): Constify. * linux-x86-low.c (push_opcode): Constify. |
||
Marc-Andre Laperle
|
e696b3ad34 |
Remove unused parameter in solib_add and update_solib_list
The target parameter in both solib_add and update_solib_list functions is not used anymore and as not been used for a while. This change removes the parameter to clean up the code a little bit. gdb/ChangeLog: * infcmd.c (post_create_inferior): Remove unused argument in call to solib_add. * remote.c (remote_start_remote): Likewise. * solib-frv.c (frv_fetch_objfile_link_map): Likewise. * solib-svr4.c: (svr4_fetch_objfile_link_map): Likewise. (enable_break): Likewise. * solib.c (update_solib_list): Remove unused target argument and its documentation. (solib_add): Remove unused target argument. Remove unused argument in call to update_solib_list. (info_sharedlibrary_command): Remove unused argument in call to update_solib_list. (sharedlibrary_command): Remove unused argument in call to solib_add. (handle_solib_event): Likewise. (reload_shared_libraries): Likewise. * solib.h (solib_add): Remove unused target argument. Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com> |
||
|
Pedro Alves
|
d7e747318f |
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
|
||
|
Joel Brobecker
|
61baf725ec |
update copyright year range in GDB files
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
||
|
Simon Marchi
|
112e8700a6 |
Class-ify ui_out
This patch finalizes the C++ conversion of the ui-out subsystem, by
turning the ui_out and ui_out_impl structures into a single class
hierarchy. ui_out functions are turned into virtual methods of that new
class, so as a result there are a lot of call sites to update.
In the previous version of the patchset, there were separate ui_out and
ui_out_impl classes, but it wasn't really useful and added boilerplate.
In this version there is simply an ui_out base class that is
extended for CLI, TUI and MI.
It's a bit hard to maintain a ChangeLog for such a big patch, I did my
best but I'm sure there are some missing or outdated info in there...
gdb/ChangeLog:
* ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header,
ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int,
ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream,
ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text,
ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags,
ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect):
Remove, replace with a method in class ui_out.
(table_begin_ftype): Remove, replace with pure virtual method in
class ui_out.
(table_body_ftype): Likewise.
(table_end_ftype): Likewise.
(table_header_ftype): Likewise.
(ui_out_begin_ftype): Likewise.
(ui_out_end_ftype): Likewise.
(field_int_ftype): Likewise.
(field_skip_ftype): Likewise.
(field_string_ftype): Likewise.
(field_fmt_ftype): Likewise.
(spaces_ftype): Likewise.
(text_ftype): Likewise.
(message_ftype): Likewise.
(wrap_hint_ftype): Likewise.
(flush_ftype): Likewise.
(redirect_ftype): Likewise.
(data_destroy_ftype): Likewise.
(struct ui_out_impl): Remove, replace with class ui_out.
(ui_out_new): Remove.
(class ui_out): New class.
* ui-out.c (struct ui_out): Remove, replaced with class ui_out.
(current_level): Remove, replace with ui_out method.
(push_level): Likewise.
(pop_level): Likewise.
(uo_table_begin, uo_table_body, uo_table_end, uo_table_header,
uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt,
uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush,
uo_redirect, uo_field_string): Remove.
(ui_out_table_begin): Replace with ...
(ui_out::table_begin): ... this.
(ui_out_table_body): Replace with ...
(ui_out::table_body): ... this.
(ui_out_table_end): Replace with ...
(ui_out::table_end): ... this.
(ui_out_table_header): Replace with ...
(ui_out::table_header): ... this.
(ui_out_begin): Replace with ...
(ui_out::begin): ... this.
(ui_out_end): Replace with ...
(ui_out::end): ... this.
(ui_out_field_int): Replace with ...
(ui_out::field_int): ... this.
(ui_out_field_fmt_int): Replace with ...
(ui_out::field_fmt_int): ... this.
(ui_out_field_core_addr): Replace with ...
(ui_out::field_core_addr): ... this.
(ui_out_field_stream): Replace with ...
(ui_out::field_stream): ... this.
(ui_out_field_skip): Replace with ...
(ui_out::field_skip): ... this.
(ui_out_field_string): Replace with ...
(ui_out::field_string): ... this.
(ui_out_field_fmt): Replace with ...
(ui_out::field_fmt): ... this.
(ui_out_spaces): Replace with ...
(ui_out::spaces): ... this.
(ui_out_text): Replace with ...
(ui_out::text): ... this.
(ui_out_message): Replace with ...
(ui_out::message): ... this.
(ui_out_wrap_hint): Replace with ...
(ui_out::wrap_hint): ... this.
(ui_out_flush): Replace with ...
(ui_out::flush): ... this.
(ui_out_redirect): Replace with ...
(ui_out::redirect): ... this.
(ui_out_test_flags): Replace with ...
(ui_out::test_flags): ... this.
(ui_out_is_mi_like_p): Replace with ...
(ui_out::is_mi_like_p): ... this.
(verify_field): Replace with ...
(ui_out::verify_field): ... this.
(ui_out_query_field): Replace with ...
(ui_out::query_table_field): ... this.
(ui_out_data): Remove.
(ui_out_new): Remove, replace with ...
(ui_out::ui_out): ... this constructor.
(do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end,
do_cleanup_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Update fallouts of struct
ui_out -> class ui_out change.
* cli-out.c (cli_out_data): Remove.
(cli_uiout_dtor): Remove.
(cli_table_begin): Replace with ...
(cli_ui_out::do_table_begin): ... this new method.
(cli_table_body): Replace with ...
(cli_ui_out::do_table_body): ... this new method.
(cli_table_end): Replace with ...
(cli_ui_out::do_table_end): ... this new method.
(cli_table_header): Replace with ...
(cli_ui_out::do_table_header): ... this new method.
(cli_begin): Replace with ...
(cli_ui_out::do_begin): ... this new method.
(cli_end): Replace with ...
(cli_ui_out::do_end): ... this new method.
(cli_field_int): Replace with ...
(cli_ui_out::do_field_int): ... this new method.
(cli_field_skip): Replace with ...
(cli_ui_out::do_field_skip): ... this new method.
(cli_field_string): Replace with ...
(cli_ui_out::do_field_string): ... this new method.
(cli_field_fmt): Replace with ...
(cli_ui_out::do_field_fmt): ... this new method.
(cli_spaces): Replace with ...
(cli_ui_out::do_spaces): ... this new method.
(cli_text): Replace with ...
(cli_ui_out::do_text): ... this new method.
(cli_message): Replace with ...
(cli_ui_out::do_message): ... this new method.
(cli_wrap_hint): Replace with ...
(cli_ui_out::do_wrap_hint): ... this new method.
(cli_flush): Replace with ...
(cli_ui_out::do_flush): ... this new method.
(cli_redirect): Replace with ...
(cli_ui_out::do_redirect): ... this new method.
(out_field_fmt): Replace with ...
(cli_ui_out::out_field_fmt): ... this new method.
(field_separator): Replace with ...
(cli_ui_out::field_separator): ... this new method.
(cli_out_set_stream): Replace with ...
(cli_ui_out::set_stream): ... this new method.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_ui_out_impl::cli_ui_out_impl): New constructor.
(cli_ui_out_impl::~cli_ui_out_impl): New destructor.
(cli_out_new): Change return type to cli_ui_out *, instantiate a
cli_ui_out.
* cli-out.h (cli_ui_out_data): Remove, replace with class
cli_ui_out.
(class cli_ui_out): New class.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_out_new): Change return type to cli_ui_out*.
(cli_out_set_stream): Remove.
* cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type
to cli_ui_out*.
(cli_interpreter_resume): Adapt.
(cli_interpreter_exec): Adapt.
* mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove.
(mi_ui_out_impl): Remove.
(mi_table_begin): Replace with ...
(mi_ui_out::do_table_begin): ... this.
(mi_table_body): Replace with ...
(mi_ui_out::do_table_body): ... this.
(mi_table_end): Replace with ...
(mi_ui_out::do_table_end): ... this.
(mi_table_header): Replace with ...
(mi_ui_out::do_table_header): ... this.
(mi_begin): Replace with ...
(mi_ui_out::do_begin): ... this.
(mi_end): Replace with ...
(mi_ui_out::do_end): ... this.
(mi_field_int): Replace with ...
(mi_ui_out::do_field_int): ... this.
(mi_field_skip): Replace with ...
(mi_ui_out::do_field_skip): ... this.
(mi_field_string): Replace with ...
(mi_ui_out::do_field_string): ... this.
(mi_field_fmt): Replace with ...
(mi_ui_out::do_field_fmt): ... this.
(mi_spaces): Replace with ...
(mi_ui_out::do_spaces): ... this.
(mi_text): Replace with ...
(mi_ui_out::do_text): ... this.
(mi_message): Replace with ...
(mi_ui_out::do_message): ... this.
(mi_wrap_hint): Replace with ...
(mi_ui_out::do_wrap_hint): ... this.
(mi_flush): Replace with ...
(mi_ui_out::do_flush): ... this.
(mi_redirect): Replace with ...
(mi_ui_out::do_redirect):
(field_separator): Replace with ...
(mi_ui_out::field_separator):
(mi_open): Replace with ...
(mi_ui_out::open): ... this.
(mi_close): Replace with ...
(mi_ui_out::close): ... this.
(mi_out_rewind): Replace with ...
(mi_ui_out::rewind): ... this.
(mi_out_put): Replace with ...
(mi_ui_out::put): ... this.
(mi_version): Replace with ...
(mi_ui_out::version): ... this.
(mi_out_data_ctor): Replace with ...
(mi_ui_out::mi_ui_out): ... this.
(mi_out_data_dtor): Replace with ...
(mi_ui_out::~mi_ui_out): ... this.
(mi_out_new): Change return type to mi_ui_out*, instantiate
an mi_ui_out object.
(as_mi_ui_out): New function.
(mi_version): Update fallouts of struct ui_out to class ui_out
transition.
(mi_out_put): Likewise.
(mi_out_rewind): Likewise.
* mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*.
* tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl):
Remove.
(tui_field_int): Replace with ...
(tui_ui_out::do_field_int): ... this.
(tui_field_string): Replace with ...
(tui_ui_out::do_field_string): ... this.
(tui_field_fmt): Replace with ...
(tui_ui_out::do_field_fmt): ... this.
(tui_text): Replace with ...
(tui_ui_out::do_text): ... this.
(tui_out_new): Change return type to tui_ui_out*, instantiate
tui_ui_out object.
(tui_ui_out::tui_ui_out): New.
* tui/tui-out.h: New file.
* tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h.
* tui/tui-io.c: Include tui/tui-out.h.
(tui_old_uiout): Change type to cli_ui_out*.
(tui_setup_io): Use dynamic_cast.
* tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*.
* tui/tui-interp.c (tui_resume): Adapt.
* ada-lang.c (print_it_exception): Update fallouts of struct
ui_out to class ui_out transition.
(print_one_exception): Likewise.
(print_mention_exception): Likewise.
* ada-tasks.c (print_ada_task_info): Likewise.
(info_task): Likewise.
(task_command): Likewise.
* auto-load.c (print_script): Likewise.
(auto_load_info_scripts): Likewise.
(info_auto_load_cmd): Likewise.
* break-catch-sig.c (signal_catchpoint_print_one): Likewise.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
(print_one_exception_catchpoint): Likewise.
(print_one_detail_exception_catchpoint): Likewise.
(print_mention_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise.
(print_solib_event): Likewise.
(watchpoint_check): Likewise.
(wrap_indent_at_field): Likewise.
(print_breakpoint_location): Likewise.
(output_thread_groups): Likewise.
(print_one_breakpoint_location): Likewise.
(breakpoint_1): Likewise.
(default_collect_info): Likewise.
(watchpoints_info): Likewise.
(print_it_catch_fork): Likewise.
(print_one_catch_fork): Likewise.
(print_it_catch_vfork): Likewise.
(print_one_catch_vfork): Likewise.
(print_it_catch_solib): Likewise.
(print_one_catch_solib): Likewise.
(print_it_catch_exec): Likewise.
(print_one_catch_exec): Likewise.
(mention): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_it_watchpoint): Likewise.
(print_mention_watchpoint): Likewise.
(print_it_masked_watchpoint): Likewise.
(print_one_detail_masked_watchpoint): Likewise.
(print_mention_masked_watchpoint): Likewise.
(bkpt_print_it): Likewise.
(tracepoint_print_one_detail): Likewise.
(tracepoint_print_mention): Likewise.
(update_static_tracepoint): Likewise.
(tracepoints_info): Likewise.
(save_breakpoints): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
* cli/cli-logging.c (set_logging_redirect): Likewise.
(pop_output_files): Likewise.
(handle_redirections): Likewise.
* cli/cli-script.c (print_command_lines): Likewise.
* cli/cli-setshow.c (do_show_command): Likewise.
(cmd_show_list): Likewise.
* cp-abi.c (list_cp_abis): Likewise.
(show_cp_abi_cmd): Likewise.
* darwin-nat-info.c (darwin_debug_regions_recurse): Likewise.
* disasm.c (gdb_pretty_print_insn): Likewise.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
* gdb_bfd.c (print_one_bfd): Likewise.
(maintenance_info_bfds): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise.
* i386-tdep.c (i386_mpx_print_bounds): Likewise.
* infcmd.c (run_command_1): Likewise.
(print_return_value_1): Likewise.
* inferior.c (print_selected_inferior): Likewise.
(print_inferior): Likewise.
* infrun.c (print_end_stepping_range_reason): Likewise.
(print_signal_exited_reason): Likewise.
(print_exited_reason): Likewise.
(print_signal_received_reason): Likewise.
(print_no_history_reason): Likewise.
* interps.c (interp_set): Likewise.
* linespec.c (decode_line_full): Likewise.
* linux-thread-db.c (info_auto_load_libthread_db): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
(mi_cmd_env_path): Likewise.
(mi_cmd_env_dir): Likewise.
(mi_cmd_inferior_tty_show): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise.
(print_partial_file_name): Likewise.
(mi_cmd_file_list_exec_source_files): Likewise.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise.
(mi_cmd_info_gdb_mi_command): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise.
(mi_cmd_stack_list_args): Likewise.
(list_arg_or_local): Likewise.
* mi/mi-cmd-var.c (print_varobj): Likewise.
(mi_cmd_var_create): Likewise.
(mi_cmd_var_delete): Likewise.
(mi_cmd_var_set_format): Likewise.
(mi_cmd_var_show_format): Likewise.
(mi_cmd_var_info_num_children): Likewise.
(mi_cmd_var_list_children): Likewise.
(mi_cmd_var_info_type): Likewise.
(mi_cmd_var_info_path_expression): Likewise.
(mi_cmd_var_info_expression): Likewise.
(mi_cmd_var_show_attributes): Likewise.
(mi_cmd_var_evaluate_expression): Likewise.
(mi_cmd_var_assign): Likewise.
(varobj_update_one): Likewise.
* mi/mi-interp.c (as_mi_interp): Likewise.
(mi_on_normal_stop_1): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(mi_user_selected_context_changed): Likewise.
* mi/mi-main.c (print_one_inferior): Likewise.
(output_cores): Likewise.
(list_available_thread_groups): Likewise.
(mi_cmd_data_list_register_names): Likewise.
(mi_cmd_data_list_changed_registers): Likewise.
(output_register): Likewise.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_list_features): Likewise.
(mi_cmd_list_target_features): Likewise.
(mi_cmd_add_inferior): Likewise.
(mi_execute_command): Likewise.
(mi_load_progress): Likewise.
(print_variable_or_computed): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise.
* osdata.c (info_osdata_command): Likewise.
* probe.c (gen_ui_out_table_header_info): Likewise.
(print_ui_out_not_applicables): Likewise.
(print_ui_out_info): Likewise.
(info_probes_for_ops): Likewise.
(enable_probes_command): Likewise.
(disable_probes_command): Likewise.
* progspace.c (print_program_space): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
* python/py-framefilter.c (py_print_type): Likewise.
(py_print_value): Likewise.
(py_print_single_arg): Likewise.
(enumerate_args): Likewise.
(enumerate_locals): Likewise.
(py_print_args): Likewise.
(py_print_frame): Likewise.
* record-btrace.c (btrace_ui_out_decode_error): Likewise.
(btrace_call_history_insn_range): Likewise.
(btrace_call_history_src_line): Likewise.
(btrace_call_history): Likewise.
* remote.c (show_remote_cmd): Likewise.
* skip.c (skip_info): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* source.c (print_source_lines_base): Likewise.
* spu-tdep.c (info_spu_event_command): Likewise.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_list): Likewise.
(info_spu_dma_cmdlist): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.
* stack.c (print_stack_frame): Likewise.
(print_frame_arg): Likewise.
(read_frame_arg): Likewise.
(print_frame_args): Likewise.
(print_frame_info): Likewise.
(print_frame): Likewise.
* symfile.c (load_progress): Likewise.
(generic_load): Likewise.
(print_transfer_performance): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(print_thread_info_1): Likewise.
(restore_selected_frame): Likewise.
(do_captured_thread_select): Likewise.
(print_selected_thread_frame): Likewise.
* top.c (execute_command_to_string): Likewise.
* tracepoint.c (tvariables_info_1): Likewise.
(trace_status_mi): Likewise.
(tfind_1): Likewise.
(print_one_static_tracepoint_marker): Likewise.
(info_static_tracepoint_markers_command): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
(fputs_maybe_filtered): Likewise.
|
||
|
Simon Marchi
|
17e5269b99 |
Fix typo in comment
gdb/ChangeLog: * infcmd.c (interrupt_command): Fix typo in comment. |
||
|
Yao Qi
|
e8b24d9ff5 |
Remove parameter valaddr from la_val_print
Nowadays, we pass both val and return value of value_contents_for_printing (val) to la_val_print. The latter is unnecessary. This patch removes the second parameter of la_val_print, and get valaddr in each language's implementation by calling value_contents_for_printing. Since value_contents_for_printing calls value_fetch_lazy, I also make VAL non-const. Note that - I don't clean up the valaddr usages in each language's routines, - I don't remove valaddr from apply_ext_lang_val_pretty_printer, and extension language ops apply_val_pretty_printer. They can be done in followup patches. gdb: 2016-11-08 Yao Qi <yao.qi@linaro.org> * ada-lang.h (ada_val_print): Remove second parameter. Remove const from "struct value *". * ada-valprint.c (print_field_values): Remove const from "struct value *". (val_print_packed_array_elements): Likewise. (print_variant_part): Likewise. (ada_val_print_string): Likewise. (ada_val_print_gnat_array): Likewise. (ada_val_print_ptr): Likewise. (ada_val_print_num): Likewise. (ada_val_print_enum): Likewise. (ada_val_print_flt): Likewise. (ada_val_print_union): Likewise. (ada_val_print_struct_union): Likewise. (ada_val_print_ref): Likewise. (ada_val_print_1): Remove second parameter. Remove const from "struct value *". (ada_val_print): Likewise. * c-lang.h (c_val_print): Likewise. * c-valprint.c (c_val_print_array): Remove const from "struct value *". (c_val_print_ptr): Likewise. (c_val_print_struct): Likewise. (c_val_print_union): Likewise. (c_val_print_int): Likewise. (c_val_print_memberptr): Likewise. (c_val_print): Remove second parameter. Remove const from "struct value *". All callers updated. * cp-valprint.c (cp_print_value): Remove const from "struct value *". (cp_print_value_fields): Likewise. (c_val_print_value): Likewise. * d-lang.h (d_val_print): Remove second parameter. Remove const from "struct value *". * d-valprint.c (dynamic_array_type): Likewise. (d_val_print): Likewise. * f-lang.h (f_val_print): Likewise. * f-valprint.c (f_val_print): Likewise. * go-lang.h (go_val_print): Likewise. * go-valprint.c (print_go_string): Likewise. (go_val_print): Likewise. * language.c (unk_lang_val_print): Likewise. * language.h (struct language_defn) <la_val_print>: Likewise. Update comments. (LA_VAL_PRINT): Remove. * m2-lang.h (m2_val_print): Remove const from "struct value *". * m2-valprint.c (m2_print_array_contents): Likewise. (m2_val_print): Likewise. * p-lang.h (pascal_val_print): Remove second parameter. Remove const from "struct value *". (pascal_object_print_value_fields): Likewise. * p-valprint.c (pascal_val_print): Likewise. (pascal_object_print_value_fields): Likewise. (pascal_object_print_value): Likewise. * rust-lang.c (rust_get_disr_info): Likewise. (val_print_struct): Likewise. (rust_val_print): Likewise. * valprint.c (generic_val_print_array): Likewise. (generic_val_print_ptr): Likewise. (generic_val_print_memberptr): Likewise. (generic_val_print_ref): Likewise. (generic_val_print_enum): Likewise. (generic_val_print_flags): Likewise. (generic_val_print_func): Likewise. (generic_val_print_bool): Likewise. (generic_val_print_int): Likewise. (generic_val_print_char): Likewise. (generic_val_print_float): Likewise. (generic_val_print_decfloat): Likewise. (generic_val_print_complex): Likewise. (generic_val_print): Likewise. (val_print): Likewise. (common_val_print): Likewise. (val_print_type_code_flags): Likewise. (val_print_scalar_formatted): Likewise. (val_print_array_elements): Likewise. * valprint.h (val_print_array_elements): Update declaration. (val_print_scalar_formatted): Likewise. (generic_val_print): Likewise. * value.h (val_print): Likewise. |
||
|
Pedro Alves
|
2f408ecb92 |
Use ui_file_as_string throughout more
This replaces most of the remaining ui_file_xstrdup calls with ui_file_as_string calls. Whenever a call was replaced, that led to a cascade of other necessary adjustments throughout, to make the code use std::string instead of raw pointers. And then whenever I added a std::string as member of a struct, I needed to adjust allocation/destruction of said struct to use new/delete instead of xmalloc/xfree. The stopping point was once gdb built again. These doesn't seem to be a way to reasonably split this out further. Maybe-not-obvious changes: - demangle_for_lookup returns a cleanup today. To get rid of that, and avoid unnecessary string dupping/copying, this introduces a demangle_result_storage type that the caller instantiates and passes to demangle_for_lookup. - Many methods returned a "char *" to indicate that the caller owns the memory and must free it. Those are switched to return a std::string instead. Methods that return a "view" into some internal string return a "const char *" instead. I.e., we only copy/allocate when necessary. gdb/ChangeLog: 2016-11-08 Pedro Alves <palves@redhat.com> * ada-lang.c (ada_name_for_lookup, type_as_string): Use and return std::string. (type_as_string_and_cleanup): Delete. (ada_lookup_struct_elt_type): Use type_as_string. * ada-lang.h (ada_name_for_lookup): Now returns std::string. * ada-varobj.c (ada_varobj_scalar_image): Return a std::string. (ada_varobj_describe_child): Make 'child_name' and 'child_path_expr' parameters std::string pointers. (ada_varobj_describe_struct_child, ada_varobj_describe_ptr_child): Likewise, and use string_printf. (ada_varobj_describe_simple_array_child) (ada_varobj_describe_child): Likewise. (ada_varobj_get_name_of_child, ada_varobj_get_path_expr_of_child) (ada_varobj_get_value_image) (ada_varobj_get_value_of_array_variable) (ada_varobj_get_value_of_variable, ada_name_of_variable) (ada_name_of_child, ada_path_expr_of_child) (ada_value_of_variable): Now returns std::string. Use string_printf. (ada_value_of_child): Adjust. * break-catch-throw.c (check_status_exception_catchpoint): Adjust to use std::string. * breakpoint.c (watch_command_1): Adjust to use std::string. * c-lang.c (c_get_string): Adjust to use std::string. * c-typeprint.c (print_name_maybe_canonical): Use std::string. * c-varobj.c (varobj_is_anonymous_child): Use ==/!= std::string operators. (c_name_of_variable): Now returns a std::string. (c_describe_child): The 'cname' and 'cfull_expression' output parameters are now std::string pointers. Adjust. (c_name_of_child, c_path_expr_of_child, c_value_of_variable) (cplus_number_of_children): Adjust to use std::string and string_printf. (cplus_name_of_variable): Now returns a std::string. (cplus_describe_child): The 'cname' and 'cfull_expression' output parameters are now std::string pointers. Adjust. (cplus_name_of_child, cplus_path_expr_of_child) (cplus_value_of_variable): Now returns a std::string. * cp-abi.c (cplus_typename_from_type_info): Return std::string. * cp-abi.h (cplus_typename_from_type_info): Return std::string. (struct cp_abi_ops) <get_typename_from_type_info>: Return std::string. * cp-support.c (inspect_type): Use std::string. (cp_canonicalize_string_full, cp_canonicalize_string_no_typedefs) (cp_canonicalize_string): Return std::string and adjust. * cp-support.h (cp_canonicalize_string) (cp_canonicalize_string_no_typedefs, cp_canonicalize_string_full): Return std::string. * dbxread.c (read_dbx_symtab): Use std::string. * dwarf2read.c (dwarf2_canonicalize_name): Adjust to use std::string. * gdbcmd.h (lookup_struct_elt_type): Adjust to use std::string. * gnu-v3-abi.c (gnuv3_get_typeid): Use std::string. (gnuv3_get_typename_from_type_info): Return a std::string and adjust. (gnuv3_get_type_from_type_info): Adjust to use std::string. * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use std::string. * infcmd.c (print_return_value_1): Adjust to use std::string. * linespec.c (find_linespec_symbols): Adjust to demangle_for_lookup API change. Use std::string. * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_set_format) (mi_cmd_var_info_type, mi_cmd_var_info_path_expression) (mi_cmd_var_info_expression, mi_cmd_var_evaluate_expression) (mi_cmd_var_assign, varobj_update_one): Adjust to use std::string. * minsyms.c (lookup_minimal_symbol): Use std::string. * python/py-varobj.c (py_varobj_iter_next): Use new instead of XNEW. vitem->name is a std::string now, adjust. * rust-exp.y (convert_ast_to_type, convert_name): Adjust to use std::string. * stabsread.c (define_symbol): Adjust to use std::string. * symtab.c (demangle_for_lookup): Now returns 'const char *'. Add a demangle_result_storage parameter. Use it for storage. (lookup_symbol_in_language) (lookup_symbol_in_objfile_from_linkage_name): Adjust to new demangle_for_lookup API. * symtab.h (struct demangle_result_storage): New type. (demangle_for_lookup): Now returns 'const char *'. Add a demangle_result_storage parameter. * typeprint.c (type_to_string): Return std::string and use ui_file_as_string. * value.h (type_to_string): Change return type to std::string. * varobj-iter.h (struct varobj_item) <name>: Now a std::string. (varobj_iter_delete): Use delete instead of xfree. * varobj.c (create_child): Return std::string instead of char * in output parameter. (name_of_variable, name_of_child, my_value_of_variable): Return std::string instead of char *. (varobj_create, varobj_get_handle): Constify 'objname' parameter. Adjust to std::string fields. (varobj_get_objname): Return a const char * instead of a char *. (varobj_get_expression): Return a std::string. (varobj_list_children): Adjust to use std::string. (varobj_get_type): Return a std::string. (varobj_get_path_expr): Return a const char * instead of a char *. Adjust to std::string fields. (varobj_get_formatted_value, varobj_get_value): Return a std::string. (varobj_set_value): Change type of 'expression' parameter to std::string. Use std::string. (install_new_value): Use std::string. (delete_variable_1): Adjust to use std::string. (create_child): Change the 'name' parameter to a std::string reference. Swap it into the new item's name. (create_child_with_value): Swap item's name into the new child's name. Use string_printf. (new_variable): Use new instead of XNEW. (free_variable): Don't xfree fields that are now std::string. (name_of_variable, name_of_child): Now returns std::string. (value_of_root): Adjust to use std::string. (my_value_of_variable, varobj_value_get_print_value): Return and use std::string. (varobj_value_get_print_value): Adjust to use ui_file_as_string and std::string. * varobj.h (struct varobj) <name, path_expr, obj_name, print_value>: Now std::string's. <name_of_variable, name_of_child, path_expr_of_child, value_of_variable>: Return std::string. (varobj_create, varobj_get_handle): Constify 'objname' parameter. (varobj_get_objname): Return a const char * instead of a char *. (varobj_get_expression, varobj_get_type): Return a std::string. (varobj_get_path_expr): Return a const char * instead of a char *. (varobj_get_formatted_value, varobj_get_value): Return a std::string. (varobj_set_value): Constify 'expression' parameter. (varobj_value_get_print_value): Return a std::string. |
||
Jan Kratochvil
|
bb805577d2 |
PR gdb/20609 - attach of JIT-debug-enabled inf 7.11.1 regression
Regression: gdb --pid $(pidof qemu-system-x86_64) stopped working with gdb 7.11.1
https://sourceware.org/bugzilla/show_bug.cgi?id=20609
It was reported for qemu-system-x86_64 but it happens for any multithreaded
inferior with a JIT debugging hook.
|