We currently pass frames to function by value, as `frame_info_ptr`.
This is somewhat expensive:
- the size of `frame_info_ptr` is 64 bytes, which is a bit big to pass
by value
- the constructors and destructor link/unlink the object in the global
`frame_info_ptr::frame_list` list. This is an `intrusive_list`, so
it's not so bad: it's just assigning a few points, there's no memory
allocation as if it was `std::list`, but still it's useless to do
that over and over.
As suggested by Tom Tromey, change many function signatures to accept
`const frame_info_ptr &` instead of `frame_info_ptr`.
Some functions reassign their `frame_info_ptr` parameter, like:
void
the_func (frame_info_ptr frame)
{
for (; frame != nullptr; frame = get_prev_frame (frame))
{
...
}
}
I wondered what to do about them, do I leave them as-is or change them
(and need to introduce a separate local variable that can be
re-assigned). I opted for the later for consistency. It might not be
clear why some functions take `const frame_info_ptr &` while others take
`frame_info_ptr`. Also, if a function took a `frame_info_ptr` because
it did re-assign its parameter, I doubt that we would think to change it
to `const frame_info_ptr &` should the implementation change such that
it doesn't need to take `frame_info_ptr` anymore. It seems better to
have a simple rule and apply it everywhere.
Change-Id: I59d10addef687d157f82ccf4d54f5dde9a963fd0
Approved-By: Andrew Burgess <aburgess@redhat.com>
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
This changes GDB to use frame_info_ptr instead of frame_info *
The substitution was done with multiple sequential `sed` commands:
sed 's/^struct frame_info;/class frame_info_ptr;/'
sed 's/struct frame_info \*/frame_info_ptr /g' - which left some
issues in a few files, that were manually fixed.
sed 's/\<frame_info \*/frame_info_ptr /g'
sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace
problems.
The changed files were then manually checked and some 'sed' changes
undone, some constructors and some gets were added, according to what
made sense, and what Tromey originally did
Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
Approved-by: Tom Tomey <tom@tromey.com>
After the commit:
commit 08106042d9
Date: Thu May 19 13:20:17 2022 +0100
gdb: move the type cast into gdbarch_tdep
GDB would no longer build using g++ 4.8. The issue appears to be some
confusion caused by GDB having 'struct gdbarch_tdep', but also a
templated function called 'gdbarch_tdep'. Prior to the above commit
the gdbarch_tdep function was not templated, and this compiled just
fine. Note that the above commit compiles just fine with later
versions of g++, so this issue was clearly fixed at some point, though
I've not tried to track down exactly when.
In this commit I propose to fix the g++ 4.8 build problem by renaming
'struct gdbarch_tdep' to 'struct gdbarch_tdep_base'. This rename
better represents that the struct is only ever used as a base class,
and removes the overloading of the name, which allows GDB to build
with g++ 4.8.
I've also updated the comment on 'struct gdbarch_tdep_base' to fix a
typo, and the comment on the 'gdbarch_tdep' function, to mention that
in maintainer mode a run-time type check is performed.
This commit started from an observation I made while working on some
other disassembler patches, that is, that the function
gdb_buffered_insn_length, is broken ... sort of.
I noticed that the gdb_buffered_insn_length function doesn't set up
the application data field if the disassemble_info structure.
Further, I noticed that some architectures, for example, ARM, require
that the application_data field be set, see gdb_print_insn_arm in
arm-tdep.c.
And so, if we ever use gdb_buffered_insn_length for ARM, then GDB will
likely crash. Which is why I said only "sort of" broken. Right now
we don't use gdb_buffered_insn_length with ARM, so maybe it isn't
broken yet?
Anyway to prove to myself that there was a problem here I extended the
disassembler self tests in disasm-selftests.c to include a test of
gdb_buffered_insn_length. As I run the test for all architectures, I
do indeed see GDB crash for ARM.
To fix this we need gdb_buffered_insn_length to create a disassembler
that inherits from gdb_disassemble_info, but we also need this new
disassembler to not print anything.
And so, I introduce a new gdb_non_printing_disassembler class, this is
a disassembler that doesn't print anything to the output stream.
I then observed that both ARC and S12Z also create non-printing
disassemblers, but these are slightly different. While the
disassembler in gdb_non_printing_disassembler reads the instruction
from a buffer, the ARC and S12Z disassemblers read from target memory
using target_read_code.
And so, I further split gdb_non_printing_disassembler into two
sub-classes, gdb_non_printing_memory_disassembler and
gdb_non_printing_buffer_disassembler.
The new selftests now pass, but otherwise, there should be no user
visible changes after this commit.
Now that filtered and unfiltered output can be treated identically, we
can unify the printf family of functions. This is done under the name
"gdb_printf". Most of this patch was written by script.
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
Add the standard arc_debug_printf, but also arc_linux_debug_printf,
arc_linux_nat_debug_printf and arc_newlib_debug_printf to match the
prefixes currently used in the debug messages.
gdb/ChangeLog:
* arc-tdep.h (arc_debug_printf): New.
* arc-tdep.c: Use arc_debug_printf.
* arc-linux-nat.c (arc_linux_nat_debug_printf): Add and use.
* arc-linux-tdep.c (arc_linux_debug_printf): Add and use.
* arc-newlib-tdep.c (arc_newlib_debug_printf): Add and use.
Change-Id: I5d937566ed7a1925f7982e8809802c8f0560d8c6
Shahab suggested we get rid of the verbosity level for the ARC debug
logging [1]. This patch does that, before doing any other change.
gdb/ChangeLog:
* arc-tdep.h (arc_debug): Change type to bool.
* arc-tdep.c (arc_debug): Change type to bool.
(arc_analyze_prologue): Adjust.
(_initialize_arc_tdep): Use add_setshow_boolean_cmd.
* arc-linux-nat.c (ps_get_thread_area): Adjust.
[1] https://sourceware.org/pipermail/gdb-patches/2021-January/175075.html
Change-Id: I16688bd42ed8978ae1acf57012c8d41a943044a5
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
This patch adds the necessary infrastructure to handle signal frames for
ARC architecture. It is fairly similar to what any other architecture
would have. Linux specific parts will be in a separate patch.
v2 [1]:
- Make the logic of "arc_sigtramp_frame_sniffer ()" simpler.
[1] Tom's remark for the first version
https://sourceware.org/pipermail/gdb-patches/2020-November/173221.html
gdb/ChangeLog:
* arc-tdep.c (arc_make_sigtramp_frame_cache): New function.
(arc_sigtramp_frame_this_id): Likewise.
(arc_sigtramp_frame_prev_register): Likewise.
(arc_sigtramp_frame_sniffer): Likewise.
(arc_siftramp_frame_unwind): New global variable.
(arc_gdbarch_init): Use sigtramp capabilities.
(arc_dump_tdep): Print sigtramp fields.
* arc-tdep.h (gdbarch_tdep): Add sigtramp fields.
With the implemenations in this patch, ARC gdb can handle
coredump related matters. The binutils counter part of
this patch has already been pushed [1].
v2 [2]:
- arc_linux_collect_gregset: Use "reg <= ARC_LAST_REGNUM" instead of
"reg < ARC_LAST_REGNUM" for the condition check of the for-loop.
- arc-linux-tdep.c: Use "ARC_LAST_REGNUM < ARRAY_SIZE (...)" instead of
"ARC_LAST_REGNUM <= ARRAY_SIZE (...)" for the "asserts".
- Use "buf + arc_linux_core_reg_offsets[ARC_ERET_REGNUM]" instead of
"buf + REG_OFF (6)".
- Fix a few typos/indentation.
v3 [3]:
- Use gdb_assert_not_reached(text) instead of gdb_assert (!text).
- Remove unnecessary braces in the for loop.
[1] arc: Add support for ARC HS extra registers in core files
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2745674244d6aecddcf636475034bdb9c0a6b4a0
[2] First remarks
https://sourceware.org/pipermail/gdb-patches/2020-September/171912.html
[3] Second remarks
https://sourceware.org/pipermail/gdb-patches/2020-October/172302.html
gdb/ChangeLog:
* arc-linux-tdep.h: New file.
* arc-linux-tdep.c (arc_linux_core_reg_offsets,
arc_linux_supply_gregset, arc_linux_supply_v2_regset,
arc_linux_collect_gregset, arc_linux_collect_v2_regset,
arc_linux_gregset, arc_linux_v2_regset,
arc_linux_iterate_over_regset_sections,
arc_linux_core_read_description): Implement.
(arc_linux_init_osabi): Set iterate_over_regset_sections.
* arc-tdep.h (ARC_OFFSET_NO_REGISTER): Declare.
(arc_gdbarch_features_create): Add.
* arc-tdep.c (arc_gdbarch_features_create): Not static anymore.
ARC Linux targets differences from baremetal:
- No support for hardware single instruction stepping.
- Different access rules to registers.
- Use of another instruction for breakpoints.
v2: Changes after Tom's remarks [1]
arc-linux-tdep.c
- Use true/false instead of TRUE/FALSE.
- arc_linux_sw_breakpoint_from_kind (): Break long lines into two.
- arc_linux_sw_breakpoint_from_kind (): Remove starting blank line.
- Use explicit number evaluation, e.g: if (a & b) -> if ((a & b) != 0)
arc-tdep.c
- Use explicit number evaluation, e.g: if (a & b) -> if ((a & b) != 0)
gdb/configure.tgt
- arc*-*-linux*): Remove "build_gdbserver=yes".
v3: Changes after Simon's remarks [2]
arc-linux-tdep.c
- Use "return trap_size" instead of cryptic "return 2".
- Removed unnecessary curly braces.
- Removed "void" from "_initialize_arc_linux_tdep (void)".
v5: Changes after Simon's remarks [3]
- Remove unnecessary empty lines.
- Replace "breakpoint uses" with "breakpoints use" in a comment.
- "return condition;" i.s.o. "if (condition) return true; else return false;"
[1] Tom's remarks
https://sourceware.org/pipermail/gdb-patches/2020-April/167887.html
[2] Simon's remarks on v2
https://sourceware.org/pipermail/gdb-patches/2020-May/168513.html
[3] Simon's remarks on v4
https://sourceware.org/pipermail/gdb-patches/2020-August/170994.html
gdb/ChangeLog:
2020-08-25 Anton Kolesov <anton.kolesov@synopsys.com>
* configure.tgt: ARC support for GNU/Linux.
* Makefile.in (ALL_TARGET_OBJS): Likewise.
* arc-linux-tdep.c: New file.
* arc-tdep.h (ARC_STATUS32_L_MASK, ARC_STATUS32_DE_MASK): Declare.
* arc-tdep.c (arc_write_pc): Use it.
For ARC there are registers that are not part of a required set in XML
target descriptions by default, but are almost always present on ARC
targets and are universally exposed by the ptrace interface. Hardware
loop registers being one of them.
LP_START and LP_END auxiliary registers are hardware loop start and end.
Formally, they are optional, but it is hard to find an ARC configuration
that doesn't have them. They are always present in processors that can
run GNU/Linux. GDB needs to know about those registers to implement
proper software single stepping, since they affect what instruction
will be next.
This commit adds the code to check for the existance of "lp_start" and
"lp_end" in XML target descriptions. If they exist, then the function
reports that the target supports hardware loops.
gdb/ChangeLog:
* arc-tdep.c (arc_check_for_hardware_loop): New.
* arc-tdep.h (gdbarch_tdep): New field has_hw_loops.
gdb/doc/ChangeLog:
* gdb.texinfo (Synopsys ARC): Document LP_START, LP_END and BTA.
A few changes have been made to make the register support simpler,
more flexible and extendible. The trigger for most of these changes
are the remarks [1] made earlier for v2 of this patch. The noticeable
improvements are:
- The arc XML target features are placed under gdb/features/arc
- There are two cores (based on ISA) and one auxiliary feature:
v1-core: ARC600, ARC601, ARC700
v2-core: ARC EM, ARC HS
aux: common in both
- The XML target features represent a minimalistic sane set of
registers irrespective of application (baremetal or linux).
- A concept of "feature" class has been introduced in the code.
The "feature" object is constructed from BFD and GDBARCH data.
It contains necessary information (ISA and register size) to
determine which XML target feature to use.
- A new structure (ARC_REGISTER_FEATURE) is added that allows
providing index, names, and the necessity of registers. This
simplifies the sanity checks and future extendibility.
- Documnetation has been updated to reflect ARC features better.
- Although the feature names has changed, there still exists
backward compatibility with older names through
find_obsolete_[core,aux]_names() functions.
The last two points were inspired from RiscV port.
[1]
https://sourceware.org/pipermail/gdb-patches/2020-May/168511.html
gdb/ChangeLog:
* arch/arc.h
(arc_gdbarch_features): New class to stir the selection of target XML.
(arc_create_target_description): Use FEATURES to choose XML target.
(arc_lookup_target_description): Use arc_create_target_description
to create _new_ target descriptions or return the already created
ones if the FEATURES is the same.
* arch/arc.c: Implementation of prototypes described above.
* gdb/arc-tdep.h (arc_regnum enum): Add more registers.
(arc_gdbarch_features_init): Initialize the FEATURES struct.
* arc-tdep.c (*_feature_name): Make feature names consistent.
(arc_register_feature): A new struct to hold information about
registers of a particular target/feature.
(arc_check_tdesc_feature): Check if XML provides registers in
compliance with ARC_REGISTER_FEATURE structs.
(arc_update_acc_reg_names): Add aliases for r58 and r59.
(determine_*_reg_feature_set): Which feature name to look for.
(arc_gdbarch_features_init): Given MACH and ABFD, initialize FEATURES.
(mach_type_to_arc_isa): Convert from a set of binutils machine types
to expected ISA enums to be used in arc_gdbarch_features structs.
* features/Makefile (FEATURE_XMLFILES): Add new files.
* gdb/features/arc/v1-aux.c: New file.
* gdb/features/arc/v1-aux.xml: Likewise.
* gdb/features/arc/v1-core.c: Likewise.
* gdb/features/arc/v1-core.xml: Likewise.
* gdb/features/arc/v2-aux.c: Likewise.
* gdb/features/arc/v2-aux.xml: Likewise.
* gdb/features/arc/v2-core.c: Likewise.
* gdb/features/arc/v2-core.xml: Likewise.
* NEWS (Changes since GDB 9): Announce obsolence of old feature names.
gdb/doc/ChangeLog:
* gdb.texinfo (Synopsys ARC): Update the documentation for ARC
Features.
gdb/testsuite/ChangeLog:
* gdb.arch/arc-tdesc-cpu.xml: Use new feature names.
This patch replaces usage of target descriptions in ARC, where the whole
description is fixed in XML, with new target descriptions where XML describes
individual features, and GDB assembles those features into actual target
description.
v2:
Removed arc.c from ALLDEPFILES in gdb/Makefile.in.
Removed vim modeline from arc-tdep.c to have it in a separate patch.
Removed braces from one line "if/else".
Undid the type change for "jb_pc" (kept it as "int").
Joined the unnecessary line breaks into one line.
No more moving around arm targets in gdb/features/Makefile.
Changed pattern checking for ARC features from "arc/{aux,core}" to "arc/".
v3:
Added include gaurds to arc.h.
Added arc_read_description to _create_ target descriptions less.
v4:
Got rid of ARC_SYS_TYPE_NONE.
Renamed ARC_SYS_TYPE_INVALID to ARC_SYS_TYPE_NUM.
Fixed a few indentations/curly braces.
Converted arc_sys_type_to_str from a macro to an inline function.
gdb/ChangeLog:
2020-03-16 Anton Kolesov <anton.kolesov@synopsys.com>
Shahab Vahedi <shahab@synopsys.com>
* Makefile.in: Add arch/arc.o
* configure.tgt: Likewise.
* arc-tdep.c (arc_tdesc_init): Use arc_read_description.
(_initialize_arc_tdep): Don't initialize old target descriptions.
(arc_read_description): New function to cache target descriptions.
* arc-tdep.h (arc_read_description): Add proto type.
* arch/arc.c: New file.
* arch/arc.h: Likewise.
* features/Makefile: Replace old target descriptions with new.
* features/arc-arcompact.c: Remove.
* features/arc-arcompact.xml: Likewise.
* features/arc-v2.c: Likewise
* features/arc-v2.xml: Likewise
* features/arc/aux-arcompact.xml: New file.
* features/arc/aux-v2.xml: Likewise.
* features/arc/core-arcompact.xml: Likewise.
* features/arc/core-v2.xml: Likewise.
* features/arc/aux-arcompact.c: Generate.
* features/arc/aux-v2.c: Likewise.
* features/arc/core-arcompact.c: Likewise.
* features/arc/core-v2.c: Likewise.
* target-descriptions (maint_print_c_tdesc_cmd): Support ARC features.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
There was a problem with generation of the disassembler options for ARC in GDB,
because a BFD architecture name was used as a CPU name, but they have different
meaning even if some architectures have same name as respective CPUs. Target
description specifies a BFD architecture, which is different from ARC CPU, as
accepted by the disassembler (and most other ARC tools), because CPU values are
much more fine grained - there can be multiple CPU values per single BFD
architecture. As a result this code should translate architecture to some CPU
value. Since there is no info on exact CPU configuration, it is best to use
the most feature-rich CPU, so that the disassembler will recognize all
instructions available to the specified architecture.
gdb/ChangeLog
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc-tdep.c (arc_gdbarch_init): Pass proper cpu value to disassembler.
* arc-tdep.h (arc_arch_is_em): New function.
(arc_arch_is_hs): Likewise.
gdb/testsuite/ChangeLog
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* gdb.arch/arc-tdesc-cpu.exp: New file.
* gdb.arch/arc-tdesc-cpu.xml: Likewise.
Add disassembler helper for GDB, that uses opcodes structure arc_instruction
and adds convenience functions to handle instruction operands. This interface
solves at least those problems with arc_instruction:
* Some instructions, like "push_s", have implicit operands which are not
directly present in arc_instruction.
* Operands of particular meaning, like branch/jump targets, have various
locations and meaning depending on type of branch/target.
* Access to operand value is abstracted into a separate function, so callee
code shouldn't bother if operand value is an immediate value or in a
register.
Testcases included in this commit are fairly limited - they test exclusively
branch instructions, something that will be used in software single stepping.
Most of the other parts of this disassembler helper are tested during prologue
analysis testing.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* configure.tgt: Add arc-insn.o.
* arc-tdep.c (arc_delayed_print_insn): Make non-static.
(dump_arc_instruction_command): New function.
(arc_fprintf_disasm): Likewise.
(arc_disassemble_info): Likewise.
(arc_insn_get_operand_value): Likewise.
(arc_insn_get_operand_value_signed): Likewise.
(arc_insn_get_memory_base_reg): Likewise.
(arc_insn_get_memory_offset): Likewise.
(arc_insn_get_branch_target): Likewise.
(arc_insn_dump): Likewise.
(arc_insn_get_linear_next_pc): Likewise.
* arc-tdep.h (arc_delayed_print_insn): Add function declaration.
(arc_disassemble_info): Likewise.
(arc_insn_get_branch_target): Likewise.
(arc_insn_get_linear_next_pc): Likewise.
* NEWS: Mention new "maint print arc arc-instruction".
gdb/doc/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.texinfo (Synopsys ARC): Add "maint print arc arc-instruction".
gdb/testsuite/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.arch/arc-decode-insn.S: New file.
* gdb.arch/arc-decode-insn.exp: Likewise.
Add ARC_LIMM_REGNUM to arc_regnum enumeration and assign a number 62 to it.
This ensures that for core registers internal register numbers in this enum are
the same as architectural numbers. This allows to use internal register
numbers in the contexts where architectural number is implied, for example when
disassembling instruction during prologue analysis.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c (core_v2_register_names, core_arcompact_register_names)
Add "limm" and "reserved".
(arc_cannot_fetch_register, arc_cannot_store_register): Add
ARC_RESERVED_REGNUM and ARC_LIMM_REGNUM.
* arc-tdep.h (arc_regnum): Likewise.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Standard get_longjmp_target implementation, similar to what is in arm-tdep.c.
Actual value of jb_pc should be set in init_osabi methods of particular OS/ABI
implementations.
gdb/ChangeLog:
* arc-tdep.h (struct gdbarch_tdep) <jb_pc>: New field.
* arc-tdep.c (arc_get_longjmp_target): New function.
(arc_gdbarch_init): Set get_longjmp_target if jb_pc is non-negative.
(arc_dump_tdep): Print jb_pc.
ARC is a family of licensable processors developed by Synopsys.
This is an initial patch that doesn't yet support some of the features, that
are already available in Synopsys' fork of GDB, namely:
* longjmp support
* signal frame handling
* prologue analysis
* Linux targets support
* native Linux support
ARC cores are configurable and extensible, which means from debugger
perspective that some registers and debug capabilities are optional, therefore
it is up to the GDB stub to determine exact list of register available on
target and supply it to GDB via XML target descriptions. List of registers
that is known to GDB and is required is intentionally kept small to simplify
requirements to GDB stub and implementation of a GDB client.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
(HFILES_NO_SRCDIR): Add arc-tdep.h.
(ALLDEPFILES): Add arc-tdep.c.
* NEWS: Mention new ARC port.
* configure.tgt: Add ARC.
* arc-tdep.c: New file.
* arc-tdep.h: New file.
* features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
* features/arc-v2.xml: New file.
* features/arc-v2.c: New file (generated).
* features/arc-arcompact.xml: New file.
* features/arc-arcompact.c: New file (generated).
gdb/doc/ChangeLog:
* gdb.texinfo (Embedded Processors): Document ARC.
(Synopsys ARC): New section.
(Standard Target Features): Document ARC features.
(ARC Features): New section.
gdb/testsuite/ChangeLog:
* gdb.xml/tdesc-regs.exp: set core-regs for arc*-*-elf32.
