* target.c (nomemory): Now that higher levels examine errno, give EIO.

* tm-sparc.h:  Don't #include <sun4/reg.h>.
* sparc-tdep.c (sparc_frame_chain, frame_saved_pc):  Remove
dependency on <sun4/reg.h>.  Start to handle cross-byte-order.
* language.h:  Avoid forward enum declaration.
* configure.in, tm-sun4os5.h, xm-sun4os5.h, config/sun4os5.mh,
config/sun4os5.mt:  New host and target.
* defs.h (errno): #include <errno.h> rather than assuming int.
From Pierre Willard.
This commit is contained in:
John Gilmore 1992-03-29 23:14:34 +00:00
parent 1eeba68641
commit f9e3b3ccc2
6 changed files with 174 additions and 45 deletions

View File

@ -63,9 +63,10 @@ m68000)
sparc)
case "${host_os}" in
sunos3) gdb_host=sun4os3 ;;
sunos4) gdb_host=sun4os4 ;;
*) gdb_host=sun4 ;;
sunos3) gdb_host=sun4os3 ;;
sunos4) gdb_host=sun4os4 ;;
sunos5*|sysv4*) gdb_host=sun4os5 ;;
*) gdb_host=sun4 ;;
esac
;;
@ -255,9 +256,10 @@ sparc)
case "${target_vendor}" in
sun)
case "${target_os}" in
sunos3) gdb_target=sun4os3 ;;
sunos4) gdb_target=sun4os4 ;;
*) gdb_target=sun4 ;;
sunos3) gdb_target=sun4os3 ;;
sunos4) gdb_target=sun4os4 ;;
sunos5|sysv4*) gdb_target=sun4os5 ;;
*) gdb_target=sun4 ;;
esac
;;
esac

View File

@ -22,9 +22,9 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#if !defined (LANGUAGE_H)
#define LANGUAGE_H 1
#ifdef __STDC__ /* Forward defs for prototypes */
#ifdef __STDC__ /* Forward decls for prototypes */
struct value;
enum exp_opcode;
/* enum exp_opcode; ANSI's `wisdom' didn't include forward enum decls. */
#endif
/* This used to be included to configure GDB for one or more specific

View File

@ -1,7 +1,5 @@
/* Machine-dependent code which would otherwise be in inflow.c and core.c,
for GDB, the GNU debugger.
Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
This code is for the sparc cpu.
/* Target-dependent code for the SPARC for GDB, the GNU debugger.
Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
This file is part of GDB.
@ -19,9 +17,7 @@ You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include <stdio.h>
#include "defs.h"
#include "param.h"
#include "frame.h"
#include "inferior.h"
#include "obstack.h"
@ -38,7 +34,7 @@ extern int stop_after_trap;
typedef enum
{
Error, not_branch, bicc, bicca, ba, baa, ticc, ta,
Error, not_branch, bicc, bicca, ba, baa, ticc, ta
} branch_type;
/* Simulate single-step ptrace call for sun4. Code written by Gary
@ -67,7 +63,8 @@ int one_stepped;
set up a simulated single-step, we undo our damage. */
void
single_step ()
single_step (pid)
int pid; /* ignored */
{
branch_type br, isannulled();
CORE_ADDR pc;
@ -122,18 +119,23 @@ single_step ()
}
}
#define FRAME_SAVED_L0 0 /* Byte offset from SP */
#define FRAME_SAVED_I0 32 /* Byte offset from SP */
CORE_ADDR
sparc_frame_chain (thisframe)
FRAME thisframe;
{
CORE_ADDR retval;
int err;
err = target_read_memory
((CORE_ADDR)&(((struct rwindow *)(thisframe->frame))->rw_in[6]),
&retval,
sizeof (CORE_ADDR));
CORE_ADDR addr;
addr = thisframe->frame + FRAME_SAVED_I0 +
REGISTER_RAW_SIZE(FP_REGNUM) * (FP_REGNUM - I0_REGNUM);
err = target_read_memory (addr, (char *) &retval, sizeof (CORE_ADDR));
if (err)
return 0;
SWAP_TARGET_AND_HOST (&retval, sizeof (retval));
return retval;
}
@ -141,33 +143,30 @@ CORE_ADDR
sparc_extract_struct_value_address (regbuf)
char regbuf[REGISTER_BYTES];
{
CORE_ADDR retval;
read_memory (((int *)(regbuf))[SP_REGNUM]+(16*4),
&retval,
sizeof (CORE_ADDR));
return retval;
/* FIXME, handle byte swapping */
return read_memory_integer (((int *)(regbuf))[SP_REGNUM]+(16*4),
sizeof (CORE_ADDR));
}
/*
* Find the pc saved in frame FRAME.
*/
/* Find the pc saved in frame FRAME. */
CORE_ADDR
frame_saved_pc (frame)
FRAME frame;
{
CORE_ADDR prev_pc;
/* If it's at the bottom, the return value's stored in i7/rp */
if (get_current_frame () == frame)
read_memory ((CORE_ADDR)&((struct rwindow *)
(read_register (SP_REGNUM)))->rw_in[7],
&prev_pc, sizeof (CORE_ADDR));
else
/* Wouldn't this always work? */
read_memory ((CORE_ADDR)&((struct rwindow *)(frame->bottom))->rw_in[7],
&prev_pc,
sizeof (CORE_ADDR));
if (get_current_frame () == frame) /* FIXME, debug check. Remove >=gdb-4.6 */
{
if (read_register (SP_REGNUM) != frame->bottom) abort();
}
read_memory ((CORE_ADDR) (frame->bottom + FRAME_SAVED_I0 +
REGISTER_RAW_SIZE(I7_REGNUM) * (I7_REGNUM - I0_REGNUM)),
(char *) &prev_pc,
sizeof (CORE_ADDR));
SWAP_TARGET_AND_HOST (&prev_pc, sizeof (prev_pc));
return PC_ADJUST (prev_pc);
}
@ -638,7 +637,30 @@ sparc_pc_adjust(pc)
This information is not currently used by GDB, since no current SPARC
implementations support extended float. */
const struct ext_format ext_format_sparc[] = {
const struct ext_format ext_format_sparc = {
/* tot sbyte smask expbyte manbyte */
{ 16, 0, 0x80, 0,1, 4,8 }, /* sparc */
16, 0, 0x80, 0,1, 4,8, /* sparc */
};
/* Figure out where the longjmp will land. We expect that we have just entered
longjmp and haven't yet setup the stack frame, so the args are still in the
output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we
extract the pc (JB_PC) that we will land at. The pc is copied into ADDR.
This routine returns true on success */
int
get_longjmp_target(pc)
CORE_ADDR *pc;
{
CORE_ADDR jb_addr;
jb_addr = read_register(O0_REGNUM);
if (target_read_memory(jb_addr + JB_PC * JB_ELEMENT_SIZE, (char *) pc,
sizeof(CORE_ADDR)))
return 0;
SWAP_TARGET_AND_HOST(pc, sizeof(CORE_ADDR));
return 1;
}

View File

@ -295,10 +295,6 @@ sparc_extract_struct_value_address PARAMS ((char [REGISTER_BYTES]));
/* Describe the pointer in each stack frame to the previous stack frame
(its caller). */
/* If you're not compiling this on a sun, you'll have to get a copy
of <sun4/reg.h> (also known as <machine/reg.h>). */
#include <sun4/reg.h>
/* FRAME_CHAIN takes a frame's nominal address
and produces the frame's chain-pointer. */

52
gdb/tm-sun4os5.h Normal file
View File

@ -0,0 +1,52 @@
/* Macro definitions for GDB for a Sun 4 running SunOS 5.
Copyright (C) 1989, 1992 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "tm-sparc.h"
#include "tm-sysv4.h"
#undef STACK_END_ADDRESS
#define STACK_END_ADDRESS 0xf8000000
#if 0 /* Setjmp/longjmp are not as well doc'd in SunOS 5.x yet */
/* Offsets into jmp_buf. Not defined by Sun, but at least documented in a
comment in <machine/setjmp.h>! */
#define JB_ELEMENT_SIZE 4 /* Size of each element in jmp_buf */
#define JB_ONSSTACK 0
#define JB_SIGMASK 1
#define JB_SP 2
#define JB_PC 3
#define JB_NPC 4
#define JB_PSR 5
#define JB_G1 6
#define JB_O0 7
#define JB_WBCNT 8
/* Figure out where the longjmp will land. We expect that we have just entered
longjmp and haven't yet setup the stack frame, so the args are still in the
output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we
extract the pc (JB_PC) that we will land at. The pc is copied into ADDR.
This routine returns true on success */
#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
#endif /* 0 */

57
gdb/xm-sun4os5.h Normal file
View File

@ -0,0 +1,57 @@
/* Macro definitions for running gdb on a Sun 4 running sunos 5.
Copyright 1989, 1992 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* Most of what we know is generic to SPARC hosts. */
#include "xm-sparc.h"
/* Pick up more stuff from the generic SVR4 host include file. */
#include "xm-sysv4.h"
/* SVR4's can't seem to agree on what to call the type that contains the
general registers. Kludge around it with a #define. */
#define gregset_t prgreg_t
#define fpregset_t prfpregset_t
/* The native Sun compiler complains about using volatile
to indicate functions that never return. So shut it up by simply
defining away "NORETURN", which is normally defined to "volatile". */
#ifndef __GNUC__
# define NORETURN /**/
#endif
/* Large alloca's fail because the attempt to increase the stack limit in
main() fails because shared libraries are allocated just below the initial
stack limit. The SunOS kernel will not allow the stack to grow into
the area occupied by the shared libraries. Sun knows about this bug
but has no obvious fix for it. */
#define BROKEN_LARGE_ALLOCA
/* If you expect to use the mmalloc package to obtain mapped symbol files,
for now you have to specify some parameters that determine how gdb places
the mappings in it's address space. See the comments in map_to_address()
for details. This is expected to only be a short term solution. Yes it
is a kludge.
FIXME: Make this more automatic. */
#define MMAP_BASE_ADDRESS 0xE0000000 /* First mapping here */
#define MMAP_INCREMENT 0x01000000 /* Increment to next mapping */