From f42fb57409240f97fe271dcd4518345fb7652df5 Mon Sep 17 00:00:00 2001
From: Alan Modra <amodra@gmail.com>
Date: Mon, 15 Sep 2008 13:53:47 +0000
Subject: [PATCH] 	* gas/all/gas.exp: Don't run redef tests on a bunch of
 targets. 	* gas/elf/elf.exp: Likewise.

---
 gas/testsuite/ChangeLog       |  5 +++++
 gas/testsuite/gas/all/gas.exp | 29 +++++++++++++++++++----------
 gas/testsuite/gas/elf/elf.exp |  6 +++++-
 3 files changed, 29 insertions(+), 11 deletions(-)

diff --git a/gas/testsuite/ChangeLog b/gas/testsuite/ChangeLog
index bc25499833c..b2188d44a80 100644
--- a/gas/testsuite/ChangeLog
+++ b/gas/testsuite/ChangeLog
@@ -1,3 +1,8 @@
+2008-09-15  Alan Modra  <amodra@bigpond.net.au>
+
+	* gas/all/gas.exp: Don't run redef tests on a bunch of targets.
+	* gas/elf/elf.exp: Likewise.
+
 2008-09-14  Arnold Metselaar  <arnold.metselaar@planet.nl>
 
 	* gas/z80/ld-group.s, gas/z80/ld-group.d: New test.
diff --git a/gas/testsuite/gas/all/gas.exp b/gas/testsuite/gas/all/gas.exp
index f6e01f08854..87908fb8af6 100644
--- a/gas/testsuite/gas/all/gas.exp
+++ b/gas/testsuite/gas/all/gas.exp
@@ -81,30 +81,39 @@ case $target_triplet in {
 }
 
 # .set works differently on some targets.
+# most of the tests won't work on targets that set linkrelax.
+# 4 octet bytes confuse address matching on ti targets.
+# pdp11 gets unexpected reloc types.
 case $target_triplet in {
     { alpha*-*-* } { }
+    { cr16*-*-* } { }
+    { crx*-*-* } { }
+    { h8300-*-* } { }
     { mips*-*-* } { }
-    { *c54x*-*-* } { }
+    { mn10200-*-* } { }
+    { mn10300-*-* } { }
+    { pdp11-*-* } { }
+    { tic30*-*-* } { }
+    { tic4x*-*-* } { }
+    { tic54x*-*-* } { }
+    { xtensa*-*-* } { }
     { z80-*-* } { }
     default {
-	setup_xfail "*c30*-*-*" "*c4x*-*-*" "pdp11-*-*" "xtensa*-*-*"
 	run_dump_test redef
 	# The next two tests can fail if the target does not convert fixups
 	# against ordinary symbols into relocations against section symbols.
 	# This is usually revealed by the error message:
 	#  symbol `sym' required but not present
-	setup_xfail "*c30*-*-*" "*c4x*-*-*" "*arm*-*-*aout*" "*arm*-*-*coff" \
-	    "*arm*-*-pe" "crx*-*-*" "h8300*-*-*" "m68hc*-*-*" "maxq-*-*" \
-	    "mn10300-*-*" "pdp11-*-*" "vax*-*-*" "z8k-*-*" "cr16-*-*"
+	setup_xfail "*arm*-*-*aout*" "*arm*-*-*coff" \
+	    "*arm*-*-pe" "m68hc*-*-*" "maxq-*-*" \
+	    "vax*-*-*" "z8k-*-*"
 	run_dump_test redef2
 	setup_xfail "*-*-aix*" "*-*-coff" "*-*-cygwin" "*-*-mingw*" "*-*-pe*" \
-	    "bfin-*-*" "*c4x*-*-*" "crx*-*-*" "h8300*-*-*" "hppa*-*-hpux*" \
-	    "m68hc*-*-*" "maxq-*-*" "mn10300-*-*" "or32-*-*" "pdp11-*-*" \
-	    "vax*-*-*" "z8k-*-*" "cr16-*-*"
+	    "bfin-*-*" "hppa*-*-hpux*" \
+	    "m68hc*-*-*" "maxq-*-*" "or32-*-*" \
+	    "vax*-*-*" "z8k-*-*"
 	run_dump_test redef3
-	setup_xfail "*c4x*-*-*"
 	gas_test_error "redef4.s" "" ".set for symbol already used as label"
-	setup_xfail "*c4x*-*-*"
 	gas_test_error "redef5.s" "" ".set for symbol already defined through .comm"
     }
 }
diff --git a/gas/testsuite/gas/elf/elf.exp b/gas/testsuite/gas/elf/elf.exp
index a1132d3fdee..55069035c76 100644
--- a/gas/testsuite/gas/elf/elf.exp
+++ b/gas/testsuite/gas/elf/elf.exp
@@ -88,16 +88,20 @@ if { ([istarget "*-*-*elf*"]
     run_dump_test "group1b" 
     case $target_triplet in {
 	{ alpha*-*-* } { }
+	{ cr16*-*-* } { }
+	{ crx*-*-* } { }
+	{ h8300-*-* } { }
 	{ hppa*-*-* } { }
 	{ iq2000*-*-* } { }
 	{ mips*-*-* } { }
+	{ mn10200-*-* } { }
+	{ mn10300-*-* } { }
 	{ *c54x*-*-* } { }
 	default {
 	    # The next test can fail if the target does not convert fixups
 	    # against ordinary symbols into relocations against section symbols.
 	    # This is usually revealed by the error message:
 	    #  symbol `sym' required but not present
-	    setup_xfail "cr16-*-*" "h8300-*-*" "mn10300-*-*"
 	    run_dump_test redef
 	    run_dump_test equ-reloc
 	}