binutils-gdb/gdb/thread.c

745 lines
18 KiB
C
Raw Normal View History

/* Multi-process/thread control for GDB, the GNU debugger.
Copyright 1986, 1987, 1988, 1993, 1998
Contributed by Lynx Real-Time Systems, Inc. Los Gatos, CA.
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
1995-08-02 11:41:12 +08:00
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
#include "defs.h"
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
#include "environ.h"
#include "value.h"
#include "target.h"
#include "gdbthread.h"
1993-09-09 04:15:34 +08:00
#include "command.h"
#include "gdbcmd.h"
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
#include <ctype.h>
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
#include <sys/types.h>
#include <signal.h>
/*#include "lynxos-core.h"*/
struct thread_info
{
struct thread_info *next;
int pid; /* Actual process id */
int num; /* Convenient handle */
CORE_ADDR prev_pc; /* State from wait_for_inferior */
CORE_ADDR prev_func_start;
char *prev_func_name;
struct breakpoint *step_resume_breakpoint;
struct breakpoint *through_sigtramp_breakpoint;
CORE_ADDR step_range_start;
CORE_ADDR step_range_end;
CORE_ADDR step_frame_address;
int trap_expected;
int handling_longjmp;
int another_trap;
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
/* This is set TRUE when a catchpoint of a shared library event
triggers. Since we don't wish to leave the inferior in the
solib hook when we report the event, we step the inferior
back to user code before stopping and reporting the event.
*/
int stepping_through_solib_after_catch;
/* When stepping_through_solib_after_catch is TRUE, this is a
list of the catchpoints that should be reported as triggering
when we finally do stop stepping.
*/
bpstat stepping_through_solib_catchpoints;
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
/* This is set to TRUE when this thread is in a signal handler
trampoline and we're single-stepping through it */
int stepping_through_sigtramp;
};
static struct target_thread_vector *target_thread_functions;
int
target_find_new_threads ()
{
int retval = 0;
if (target_thread_functions &&
target_thread_functions->find_new_threads)
retval = (*(target_thread_functions->find_new_threads)) ();
return retval; /* no support */
}
int
target_get_thread_info PARAMS ((
gdb_threadref * ref,
int selection, /* FIXME: Selection */
struct gdb_ext_thread_info * info));
int
target_get_thread_info (ref, selection, info)
gdb_threadref *ref;
int selection;
/* FIXME: Selection */
struct gdb_ext_thread_info *info;
{
int retval = 0;
if (target_thread_functions
&& target_thread_functions->get_thread_info)
retval = (*(target_thread_functions->get_thread_info)) (ref, selection, info);
return retval;
}
/* It is possible that these bind and unbinf functions implement a
stack the interface allows it, but its not implemented that way
*/
void
bind_target_thread_vector (vec)
struct target_thread_vector *vec;
{
target_thread_functions = vec;
}
/* Prototypes for exported functions. */
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
struct target_thread_vector *
unbind_target_thread_vector ()
{
struct target_thread_vector *retval;
retval = target_thread_functions;
target_thread_functions = 0;
return retval;
} /* unbind_target_thread-vector */
void _initialize_thread PARAMS ((void));
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
/* Prototypes for local functions. */
/* If the host has threads, the host machine definition may
set this macro. But, for remote thread debugging, it gets more
complex and setting macros does not bind to the various target
dependent methods well. So, we use the vector target_thread_functions
*/
#if !defined(FIND_NEW_THREADS)
#define FIND_NEW_THREADS target_find_new_threads
#endif
static struct thread_info *thread_list = NULL;
static int highest_thread_num;
static void
thread_command PARAMS ((char * tidstr, int from_tty));
static void
prune_threads PARAMS ((void));
static void
switch_to_thread PARAMS ((int pid));
static struct thread_info *
find_thread_id PARAMS ((int num));
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
static void
info_threads_command PARAMS ((char *, int));
static void
restore_current_thread PARAMS ((int));
static void
thread_apply_all_command PARAMS ((char *, int));
static void
thread_apply_command PARAMS ((char *, int));
static void info_threads_command PARAMS ((char *, int));
* breakpoint.c (breakpoint_thread_match break_command_1): Thread-specific breakpoint support. * breakpoint.h (struct breakpoint): Add thread id field. * fork-child.c (fork_inferior): Move call to init_thread_list() back a bit so that init_trace_fun can do thread functions. * hppa-tdep.c (restore_pc_queue): Add pid to call to target_wait. * hppab-nat.c (child_resume): Handle default pid. * hppah-nat.c (child_resume): Handle default pid. * i386lynx-nat.c (child_wait): New arg pid. * inflow.c (kill_command): Reset thread list. * infptrace.c (child_resume): Handle default pid. * infrun.c: Thread-specific breakpoint support. * inftarg.c (child_wait): Add pid arg. * osfsolib.c (solib_create_inferior_hook): Add pid to call to target_resume. * procfs.c: Multi-thread support. * remote-bug.c (bug_wait): Add pid arg. * remote-hms.c (hms_wait): Add pid arg. * remote-mips.c (mips_wait): Add pid arg. * remote-mon.c (monitor_wait): Add pid arg. * remote-nindy.c (nindy_wait): Add pid arg. * remote-sim.c (gdbsim_wait): Add pid arg. * remote-udi.c (udi_wait): Add pid arg. * remote-vx.c (vx_wait): Add pid arg. * remote-z8k.c (sim_wait): Add pid arg. * remote.c (remote_wait): Add pid arg. * solib.c (solib_create_inferior_hook): Add pid to call to target_resume. * target.h (struct target_ops): Add pid arg to to_wait and to_notice_signals. * thread.c (valid_thread_id): New func to validate thread #s. * (pid_to_thread_id): New func to do the obvious. * thread.h: Prototypes for above. * coff-solib.c (coff_solib_add): Use nameoffset field to locate filename.
1993-10-16 14:42:02 +08:00
static void restore_current_thread PARAMS ((int));
static void thread_apply_all_command PARAMS ((char *, int));
static void thread_apply_command PARAMS ((char *, int));
static int thread_alive PARAMS ((struct thread_info *));
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
void
init_thread_list ()
{
struct thread_info *tp, *tpnext;
if (!thread_list)
return;
for (tp = thread_list; tp; tp = tpnext)
{
tpnext = tp->next;
free (tp);
}
thread_list = NULL;
highest_thread_num = 0;
}
void
add_thread (pid)
int pid;
{
struct thread_info *tp;
tp = (struct thread_info *) xmalloc (sizeof (struct thread_info));
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
tp->pid = pid;
tp->num = ++highest_thread_num;
tp->prev_pc = 0;
tp->prev_func_start = 0;
tp->prev_func_name = NULL;
tp->step_range_start = 0;
tp->step_range_end = 0;
tp->step_frame_address =0;
tp->step_resume_breakpoint = 0;
tp->through_sigtramp_breakpoint = 0;
tp->handling_longjmp = 0;
tp->trap_expected = 0;
tp->another_trap = 0;
tp->stepping_through_solib_after_catch = 0;
tp->stepping_through_solib_catchpoints = NULL;
tp->stepping_through_sigtramp = 0;
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
tp->next = thread_list;
thread_list = tp;
}
Wed May 21 16:03:25 1997 Michael Snyder <msnyder@cleaver.cygnus.com> * procfs.c (init_procinfo): new function, abstracts some code shared by create_procinfo and do_attach; (procfs_set_inferior_syscall_traps): new function, abstracts some code needed by procfs_init_inferior, do_attach, and procfs_lwp_creation_handler; (procfs_first_available): new function, find any LWP that's runnable; (procfs_thread_alive): replace stub function with real implementation; (procfs_lwp_creation_handler): fix bug starting new child threads; (info_proc): bug fixes and enhancements for the "INFO PROCESSES" command; (close_procinfo_file): call new function "delete_thread" to cleanup GDB's thread database; (proc_init_failed): add new argument "kill", to control whether process is killed (so this function can be shared by create_procinfo and do_attach); (procfs_exit_handler): handle exit from an attached process, and cleanup procinfo handles when the process exits; (procfs_resume, procfs_wait): cleanup after a thread when it exits; (do_attach, do_detach): handle attached processes with multiple threads; plus some general improvements in the diagnostic output. * sol-thread.c (sol_thread_alive): replace stub with real implementation; (thread_to_lwp, lwp_to_thread): enhance to handle threads that may have exited; (sol_thread_attach): add startup setup stuff; (sol_thread_detach): add unpush_target call; (sol_thread_mourn_inferior): add unpush_target call; (sol_thread_wait, sol_thread_resume): enhance to deal with thread exit cleanly; (sol_thread_new_objfile, sol_thread_pid_to_str): detect unsuccessful startup and don't crash; plus some general cleanup. * thread.c (delete_thread): new function, allows targets to notify gdb when a thread is no longer valid. * infrun.c (wait_for_inferior): don't try to detect a new thread on receiving a TARGET_EXITED event.
1997-05-22 07:33:33 +08:00
void
delete_thread (pid)
int pid;
{
struct thread_info *tp, *tpprev;
tpprev = NULL;
for (tp = thread_list; tp; tpprev = tp, tp = tp->next)
if (tp->pid == pid)
break;
if (!tp)
return;
if (tpprev)
tpprev->next = tp->next;
else
thread_list = tp->next;
free (tp);
return;
}
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
static struct thread_info *
find_thread_id (num)
int num;
{
struct thread_info *tp;
for (tp = thread_list; tp; tp = tp->next)
if (tp->num == num)
return tp;
return NULL;
}
* breakpoint.c (breakpoint_thread_match break_command_1): Thread-specific breakpoint support. * breakpoint.h (struct breakpoint): Add thread id field. * fork-child.c (fork_inferior): Move call to init_thread_list() back a bit so that init_trace_fun can do thread functions. * hppa-tdep.c (restore_pc_queue): Add pid to call to target_wait. * hppab-nat.c (child_resume): Handle default pid. * hppah-nat.c (child_resume): Handle default pid. * i386lynx-nat.c (child_wait): New arg pid. * inflow.c (kill_command): Reset thread list. * infptrace.c (child_resume): Handle default pid. * infrun.c: Thread-specific breakpoint support. * inftarg.c (child_wait): Add pid arg. * osfsolib.c (solib_create_inferior_hook): Add pid to call to target_resume. * procfs.c: Multi-thread support. * remote-bug.c (bug_wait): Add pid arg. * remote-hms.c (hms_wait): Add pid arg. * remote-mips.c (mips_wait): Add pid arg. * remote-mon.c (monitor_wait): Add pid arg. * remote-nindy.c (nindy_wait): Add pid arg. * remote-sim.c (gdbsim_wait): Add pid arg. * remote-udi.c (udi_wait): Add pid arg. * remote-vx.c (vx_wait): Add pid arg. * remote-z8k.c (sim_wait): Add pid arg. * remote.c (remote_wait): Add pid arg. * solib.c (solib_create_inferior_hook): Add pid to call to target_resume. * target.h (struct target_ops): Add pid arg to to_wait and to_notice_signals. * thread.c (valid_thread_id): New func to validate thread #s. * (pid_to_thread_id): New func to do the obvious. * thread.h: Prototypes for above. * coff-solib.c (coff_solib_add): Use nameoffset field to locate filename.
1993-10-16 14:42:02 +08:00
int
valid_thread_id (num)
int num;
{
struct thread_info *tp;
for (tp = thread_list; tp; tp = tp->next)
if (tp->num == num)
return 1;
return 0;
}
int
pid_to_thread_id (pid)
int pid;
{
struct thread_info *tp;
for (tp = thread_list; tp; tp = tp->next)
if (tp->pid == pid)
return tp->num;
return 0;
}
int
thread_id_to_pid (num)
int num;
{
struct thread_info *thread = find_thread_id (num);
if (thread)
return thread->pid;
else
return -1;
}
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
int
in_thread_list (pid)
int pid;
{
struct thread_info *tp;
for (tp = thread_list; tp; tp = tp->next)
if (tp->pid == pid)
return 1;
return 0; /* Never heard of 'im */
}
/* Load infrun state for the thread PID. */
void load_infrun_state (pid, prev_pc, prev_func_start, prev_func_name,
trap_expected, step_resume_breakpoint,
through_sigtramp_breakpoint, step_range_start,
step_range_end, step_frame_address,
handling_longjmp, another_trap,
1999-01-06 03:42:47 +08:00
stepping_through_solib_after_catch,
stepping_through_solib_catchpoints,
stepping_through_sigtramp)
int pid;
CORE_ADDR *prev_pc;
CORE_ADDR *prev_func_start;
char **prev_func_name;
int *trap_expected;
struct breakpoint **step_resume_breakpoint;
struct breakpoint **through_sigtramp_breakpoint;
CORE_ADDR *step_range_start;
CORE_ADDR *step_range_end;
CORE_ADDR *step_frame_address;
int *handling_longjmp;
int *another_trap;
int * stepping_through_solib_after_catch;
bpstat * stepping_through_solib_catchpoints;
int * stepping_through_sigtramp;
{
struct thread_info *tp;
/* If we can't find the thread, then we're debugging a single threaded
process. No need to do anything in that case. */
tp = find_thread_id (pid_to_thread_id (pid));
if (tp == NULL)
return;
*prev_pc = tp->prev_pc;
*prev_func_start = tp->prev_func_start;
*prev_func_name = tp->prev_func_name;
*step_resume_breakpoint = tp->step_resume_breakpoint;
*step_range_start = tp->step_range_start;
*step_range_end = tp->step_range_end;
*step_frame_address = tp->step_frame_address;
*through_sigtramp_breakpoint = tp->through_sigtramp_breakpoint;
*handling_longjmp = tp->handling_longjmp;
*trap_expected = tp->trap_expected;
*another_trap = tp->another_trap;
*stepping_through_solib_after_catch = tp->stepping_through_solib_after_catch;
*stepping_through_solib_catchpoints = tp->stepping_through_solib_catchpoints;
*stepping_through_sigtramp = tp->stepping_through_sigtramp;
}
/* Save infrun state for the thread PID. */
void save_infrun_state (pid, prev_pc, prev_func_start, prev_func_name,
trap_expected, step_resume_breakpoint,
through_sigtramp_breakpoint, step_range_start,
step_range_end, step_frame_address,
handling_longjmp, another_trap,
1999-01-06 03:42:47 +08:00
stepping_through_solib_after_catch,
stepping_through_solib_catchpoints,
stepping_through_sigtramp)
int pid;
CORE_ADDR prev_pc;
CORE_ADDR prev_func_start;
char *prev_func_name;
int trap_expected;
struct breakpoint *step_resume_breakpoint;
struct breakpoint *through_sigtramp_breakpoint;
CORE_ADDR step_range_start;
CORE_ADDR step_range_end;
CORE_ADDR step_frame_address;
int handling_longjmp;
int another_trap;
int stepping_through_solib_after_catch;
bpstat stepping_through_solib_catchpoints;
int stepping_through_sigtramp;
{
struct thread_info *tp;
/* If we can't find the thread, then we're debugging a single-threaded
process. Nothing to do in that case. */
tp = find_thread_id (pid_to_thread_id (pid));
if (tp == NULL)
return;
tp->prev_pc = prev_pc;
tp->prev_func_start = prev_func_start;
tp->prev_func_name = prev_func_name;
tp->step_resume_breakpoint = step_resume_breakpoint;
tp->step_range_start = step_range_start;
tp->step_range_end = step_range_end;
tp->step_frame_address = step_frame_address;
tp->through_sigtramp_breakpoint = through_sigtramp_breakpoint;
tp->handling_longjmp = handling_longjmp;
tp->trap_expected = trap_expected;
tp->another_trap = another_trap;
tp->stepping_through_solib_after_catch = stepping_through_solib_after_catch;
tp->stepping_through_solib_catchpoints = stepping_through_solib_catchpoints;
tp->stepping_through_sigtramp = stepping_through_sigtramp;
}
/* Return true if TP is an active thread. */
static int
thread_alive (tp)
struct thread_info *tp;
{
if (tp->pid == -1)
return 0;
if (! target_thread_alive (tp->pid))
{
tp->pid = -1; /* Mark it as dead */
return 0;
}
return 1;
}
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
static void
prune_threads ()
{
struct thread_info *tp, *tpprev, *next;
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
tpprev = 0;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
{
if (tpprev)
tpprev->next = next;
else
thread_list = next;
free (tp);
}
else
tpprev = tp;
}
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
}
/* Print information about currently known threads
*
* Note: this has the drawback that it _really_ switches
* threads, which frees the frame cache. A no-side
* effects info-threads command would be nicer.
*/
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
static void
info_threads_command (arg, from_tty)
char *arg;
int from_tty;
{
struct thread_info *tp;
1999-01-06 03:42:47 +08:00
int current_pid = inferior_pid;
struct frame_info *cur_frame;
int saved_frame_level = selected_frame_level;
int counter;
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
/* Avoid coredumps which would happen if we tried to access a NULL
selected_frame. */
if (!target_has_stack) error ("No stack.");
prune_threads ();
#if defined(FIND_NEW_THREADS)
FIND_NEW_THREADS ();
#endif
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
for (tp = thread_list; tp; tp = tp->next)
{
if (tp->pid == current_pid)
printf_filtered ("* ");
else
printf_filtered (" ");
#ifdef HPUXHPPA
printf_filtered ("%d %s ", tp->num, target_tid_to_str (tp->pid));
#else
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
printf_filtered ("%d %s ", tp->num, target_pid_to_str (tp->pid));
#endif
switch_to_thread (tp->pid);
Wed May 21 16:03:25 1997 Michael Snyder <msnyder@cleaver.cygnus.com> * procfs.c (init_procinfo): new function, abstracts some code shared by create_procinfo and do_attach; (procfs_set_inferior_syscall_traps): new function, abstracts some code needed by procfs_init_inferior, do_attach, and procfs_lwp_creation_handler; (procfs_first_available): new function, find any LWP that's runnable; (procfs_thread_alive): replace stub function with real implementation; (procfs_lwp_creation_handler): fix bug starting new child threads; (info_proc): bug fixes and enhancements for the "INFO PROCESSES" command; (close_procinfo_file): call new function "delete_thread" to cleanup GDB's thread database; (proc_init_failed): add new argument "kill", to control whether process is killed (so this function can be shared by create_procinfo and do_attach); (procfs_exit_handler): handle exit from an attached process, and cleanup procinfo handles when the process exits; (procfs_resume, procfs_wait): cleanup after a thread when it exits; (do_attach, do_detach): handle attached processes with multiple threads; plus some general improvements in the diagnostic output. * sol-thread.c (sol_thread_alive): replace stub with real implementation; (thread_to_lwp, lwp_to_thread): enhance to handle threads that may have exited; (sol_thread_attach): add startup setup stuff; (sol_thread_detach): add unpush_target call; (sol_thread_mourn_inferior): add unpush_target call; (sol_thread_wait, sol_thread_resume): enhance to deal with thread exit cleanly; (sol_thread_new_objfile, sol_thread_pid_to_str): detect unsuccessful startup and don't crash; plus some general cleanup. * thread.c (delete_thread): new function, allows targets to notify gdb when a thread is no longer valid. * infrun.c (wait_for_inferior): don't try to detect a new thread on receiving a TARGET_EXITED event.
1997-05-22 07:33:33 +08:00
if (selected_frame)
print_only_stack_frame (selected_frame, -1, 0);
Wed May 21 16:03:25 1997 Michael Snyder <msnyder@cleaver.cygnus.com> * procfs.c (init_procinfo): new function, abstracts some code shared by create_procinfo and do_attach; (procfs_set_inferior_syscall_traps): new function, abstracts some code needed by procfs_init_inferior, do_attach, and procfs_lwp_creation_handler; (procfs_first_available): new function, find any LWP that's runnable; (procfs_thread_alive): replace stub function with real implementation; (procfs_lwp_creation_handler): fix bug starting new child threads; (info_proc): bug fixes and enhancements for the "INFO PROCESSES" command; (close_procinfo_file): call new function "delete_thread" to cleanup GDB's thread database; (proc_init_failed): add new argument "kill", to control whether process is killed (so this function can be shared by create_procinfo and do_attach); (procfs_exit_handler): handle exit from an attached process, and cleanup procinfo handles when the process exits; (procfs_resume, procfs_wait): cleanup after a thread when it exits; (do_attach, do_detach): handle attached processes with multiple threads; plus some general improvements in the diagnostic output. * sol-thread.c (sol_thread_alive): replace stub with real implementation; (thread_to_lwp, lwp_to_thread): enhance to handle threads that may have exited; (sol_thread_attach): add startup setup stuff; (sol_thread_detach): add unpush_target call; (sol_thread_mourn_inferior): add unpush_target call; (sol_thread_wait, sol_thread_resume): enhance to deal with thread exit cleanly; (sol_thread_new_objfile, sol_thread_pid_to_str): detect unsuccessful startup and don't crash; plus some general cleanup. * thread.c (delete_thread): new function, allows targets to notify gdb when a thread is no longer valid. * infrun.c (wait_for_inferior): don't try to detect a new thread on receiving a TARGET_EXITED event.
1997-05-22 07:33:33 +08:00
else
printf_filtered ("[No stack.]\n");
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
}
switch_to_thread (current_pid);
/* Code below copied from "up_silently_base" in "stack.c".
* It restores the frame set by the user before the "info threads"
* command. We have finished the info-threads display by switching
* back to the current thread. That switch has put us at the top
* of the stack (leaf frame).
*/
counter = saved_frame_level;
cur_frame = find_relative_frame(selected_frame, &counter);
1999-01-06 03:42:47 +08:00
if (counter != 0)
{
/* Ooops, can't restore, tell user where we are. */
warning ("Couldn't restore frame in current thread, at frame 0");
print_stack_frame (selected_frame, -1, 0);
1999-01-06 03:42:47 +08:00
}
else
{
select_frame(cur_frame, saved_frame_level);
1999-01-06 03:42:47 +08:00
}
/* re-show current frame. */
show_stack_frame(cur_frame);
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
}
/* Switch from one thread to another. */
static void
switch_to_thread (pid)
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
int pid;
{
if (pid == inferior_pid)
return;
inferior_pid = pid;
flush_cached_frames ();
registers_changed ();
stop_pc = read_pc();
select_frame (get_current_frame (), 0);
}
static void
restore_current_thread (pid)
int pid;
{
1999-01-06 03:42:47 +08:00
if (pid != inferior_pid)
{
switch_to_thread (pid);
print_stack_frame( get_current_frame(), 0, -1);
}
}
/* Apply a GDB command to a list of threads. List syntax is a whitespace
seperated list of numbers, or ranges, or the keyword `all'. Ranges consist
of two numbers seperated by a hyphen. Examples:
thread apply 1 2 7 4 backtrace Apply backtrace cmd to threads 1,2,7,4
thread apply 2-7 9 p foo(1) Apply p foo(1) cmd to threads 2->7 & 9
thread apply all p x/i $pc Apply x/i $pc cmd to all threads
*/
static void
thread_apply_all_command (cmd, from_tty)
char *cmd;
int from_tty;
{
struct thread_info *tp;
struct cleanup *old_chain;
if (cmd == NULL || *cmd == '\000')
error ("Please specify a command following the thread ID list");
1998-10-13 Jason Molenda (jsm@bugshack.cygnus.com) * blockframe.c (find_pc_sect_partial_function): Add braces to avoid possible nested-if confusion. * breakpoint.c (breakpoint_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. * gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined. * gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability prototypes. * symtab.h: Add prototype for _initialize_source. * value.h: Add prototype for _initialize_value. * defs.h: Include sys/types.h or stddef.h to get size_t. (make_cleanup): Add make_cleanup_func typedef and switch to using a prototype for this function. (mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't using mmalloc. * ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c dwarf2read.c dwarfread.c elfread.c eval.c exec.c gdbtk-cmds.c gdbtk.c infcmd.c infrun.c mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c valops.c: Cast parameters passed to make_cleanup to use the new make_cleanup_func typedef. More warning cleanups. There are still a bunch of places where the first argument to make_cleanup is not cast to (make_cleanup_func); these are either due to the function fitting the make_cleanup_func specification already (e.g. free()) or they are in files that weren't compiled when I did my make on a Linux native system. Bwahahaha. You can see them like this: grep make_cleanup\ * | grep -v make_cleanup_func I'll surely go back and clean up the remaining suspicious calls in GDB one of these days. :-)
1998-10-14 09:15:00 +08:00
old_chain = make_cleanup ((make_cleanup_func) restore_current_thread,
1999-01-06 03:42:47 +08:00
(void *) inferior_pid);
for (tp = thread_list; tp; tp = tp->next)
if (thread_alive (tp))
{
switch_to_thread (tp->pid);
#ifdef HPUXHPPA
1999-01-06 03:42:47 +08:00
printf_filtered ("\nThread %d (%s):\n",
tp->num,
target_tid_to_str (inferior_pid));
#else
printf_filtered ("\nThread %d (%s):\n", tp->num,
target_pid_to_str (inferior_pid));
#endif
execute_command (cmd, from_tty);
}
}
static void
thread_apply_command (tidlist, from_tty)
char *tidlist;
int from_tty;
{
char *cmd;
char *p;
struct cleanup *old_chain;
if (tidlist == NULL || *tidlist == '\000')
error ("Please specify a thread ID list");
for (cmd = tidlist; *cmd != '\000' && !isalpha(*cmd); cmd++);
if (*cmd == '\000')
error ("Please specify a command following the thread ID list");
1998-10-13 Jason Molenda (jsm@bugshack.cygnus.com) * blockframe.c (find_pc_sect_partial_function): Add braces to avoid possible nested-if confusion. * breakpoint.c (breakpoint_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. * gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined. * gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability prototypes. * symtab.h: Add prototype for _initialize_source. * value.h: Add prototype for _initialize_value. * defs.h: Include sys/types.h or stddef.h to get size_t. (make_cleanup): Add make_cleanup_func typedef and switch to using a prototype for this function. (mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't using mmalloc. * ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c dwarf2read.c dwarfread.c elfread.c eval.c exec.c gdbtk-cmds.c gdbtk.c infcmd.c infrun.c mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c valops.c: Cast parameters passed to make_cleanup to use the new make_cleanup_func typedef. More warning cleanups. There are still a bunch of places where the first argument to make_cleanup is not cast to (make_cleanup_func); these are either due to the function fitting the make_cleanup_func specification already (e.g. free()) or they are in files that weren't compiled when I did my make on a Linux native system. Bwahahaha. You can see them like this: grep make_cleanup\ * | grep -v make_cleanup_func I'll surely go back and clean up the remaining suspicious calls in GDB one of these days. :-)
1998-10-14 09:15:00 +08:00
old_chain = make_cleanup ((make_cleanup_func) restore_current_thread,
1999-01-06 03:42:47 +08:00
(void *) inferior_pid);
while (tidlist < cmd)
{
struct thread_info *tp;
int start, end;
start = strtol (tidlist, &p, 10);
if (p == tidlist)
error ("Error parsing %s", tidlist);
tidlist = p;
while (*tidlist == ' ' || *tidlist == '\t')
tidlist++;
if (*tidlist == '-') /* Got a range of IDs? */
{
tidlist++; /* Skip the - */
end = strtol (tidlist, &p, 10);
if (p == tidlist)
error ("Error parsing %s", tidlist);
tidlist = p;
while (*tidlist == ' ' || *tidlist == '\t')
tidlist++;
}
else
end = start;
for (; start <= end; start++)
{
tp = find_thread_id (start);
if (!tp)
warning ("Unknown thread %d.", start);
else if (!thread_alive (tp))
warning ("Thread %d has terminated.", start);
else
{
switch_to_thread (tp->pid);
#ifdef HPUXHPPA
1999-01-06 03:42:47 +08:00
printf_filtered ("\nThread %d (%s):\n", tp->num,
target_tid_to_str (inferior_pid));
#else
printf_filtered ("\nThread %d (%s):\n", tp->num,
target_pid_to_str (inferior_pid));
#endif
execute_command (cmd, from_tty);
}
}
}
}
/* Switch to the specified thread. Will dispatch off to thread_apply_command
if prefix of arg is `apply'. */
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
static void
thread_command (tidstr, from_tty)
char *tidstr;
int from_tty;
{
int num;
struct thread_info *tp;
if (!tidstr)
{
/* Don't generate an error, just say which thread is current. */
if (target_has_stack)
printf_filtered ("[Current thread is %d (%s)]\n",
pid_to_thread_id(inferior_pid),
#if defined(HPUXHPPA)
target_tid_to_str(inferior_pid)
#else
target_pid_to_str(inferior_pid)
#endif
);
else
error ("No stack.");
return;
}
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
num = atoi (tidstr);
tp = find_thread_id (num);
if (!tp)
error ("Thread ID %d not known. Use the \"info threads\" command to\n\
see the IDs of currently known threads.", num);
if (!thread_alive (tp))
error ("Thread ID %d has terminated.\n", num);
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
switch_to_thread (tp->pid);
if (context_hook)
context_hook (num);
printf_filtered ("[Switching to thread %d (%s)]\n",
pid_to_thread_id (inferior_pid),
#if defined(HPUXHPPA)
target_tid_to_str (inferior_pid)
#else
target_pid_to_str (inferior_pid)
#endif
);
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
print_stack_frame (selected_frame, selected_frame_level, 1);
}
/* Commands with a prefix of `thread'. */
struct cmd_list_element *thread_cmd_list = NULL;
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
void
_initialize_thread ()
{
static struct cmd_list_element *thread_apply_list = NULL;
extern struct cmd_list_element *cmdlist;
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
add_info ("threads", info_threads_command,
"IDs of currently known threads.");
add_prefix_cmd ("thread", class_run, thread_command,
"Use this command to switch between threads.\n\
The new thread ID must be currently known.", &thread_cmd_list, "thread ", 1,
&cmdlist);
add_prefix_cmd ("apply", class_run, thread_apply_command,
"Apply a command to a list of threads.",
&thread_apply_list, "apply ", 1, &thread_cmd_list);
add_cmd ("all", class_run, thread_apply_all_command,
"Apply a command to all threads.",
&thread_apply_list);
if (!xdb_commands)
add_com_alias ("t", "thread", class_run, 1);
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 14:25:36 +08:00
}