binutils-gdb/gdb/sparclet-rom.c

295 lines
10 KiB
C
Raw Normal View History

/* Remote target glue for the SPARC Sparclet ROM monitor.
Copyright 1995, 1996 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "gdbcore.h"
#include "target.h"
#include "monitor.h"
#include "serial.h"
#include "srec.h"
#include "symtab.h"
#include "symfile.h" /* for generic_load */
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
#include <time.h>
extern void report_transfer_performance PARAMS ((unsigned long, time_t, time_t));
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
static struct target_ops sparclet_ops;
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
static void sparclet_open PARAMS ((char *args, int from_tty));
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
/* This array of registers need to match the indexes used by GDB.
This exists because the various ROM monitors use different strings
than does GDB, and don't necessarily support all the registers
either. So, typing "info reg sp" becomes a "r30". */
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
/*PSR 0x00000080 impl ver icc AW LE EE EC EF PIL S PS ET CWP WIM
0x0 0x0 0x0 0 0 0 0 0 0x0 1 0 0 0x00 0x2
0000010
INS LOCALS OUTS GLOBALS
0 0x00000000 0x00000000 0x00000000 0x00000000
1 0x00000000 0x00000000 0x00000000 0x00000000
2 0x00000000 0x00000000 0x00000000 0x00000000
3 0x00000000 0x00000000 0x00000000 0x00000000
4 0x00000000 0x00000000 0x00000000 0x00000000
5 0x00000000 0x00001000 0x00000000 0x00000000
6 0x00000000 0x00000000 0x123f0000 0x00000000
7 0x00000000 0x00000000 0x00000000 0x00000000
pc: 0x12010000 0x00000000 unimp
npc: 0x12010004 0x00001000 unimp 0x1000
tbr: 0x00000000
y: 0x00000000
*/
/* these correspond to the offsets from tm-* files from config directories */
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
/* is wim part of psr?? */
/* monitor wants lower case */
static char *sparclet_regnames[NUM_REGS] = REGISTER_NAMES;
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
/* Function: sparclet_supply_register
Just returns with no action.
This function is required, because parse_register_dump (monitor.c)
expects to be able to call it. If we don't supply something, it will
call a null pointer and core-dump. Since this function does not
actually do anything, GDB will request the registers individually. */
static void
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
sparclet_supply_register (regname, regnamelen, val, vallen)
char *regname;
int regnamelen;
char *val;
int vallen;
{
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
return;
}
static void
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
sparclet_load (desc, file, hashmark)
serial_t desc;
char *file;
int hashmark;
{
bfd *abfd;
asection *s;
int i;
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
CORE_ADDR load_offset;
time_t start_time, end_time;
unsigned long data_count = 0;
/* enable user to specify address for downloading as 2nd arg to load */
i = sscanf(file, "%*s 0x%lx", &load_offset);
if (i >= 1 )
{
char *p;
for (p = file; *p != '\000' && !isspace (*p); p++);
*p = '\000';
}
else
load_offset = 0;
abfd = bfd_openr (file, 0);
if (!abfd)
{
printf_filtered ("Unable to open file %s\n", file);
return;
}
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
if (bfd_check_format (abfd, bfd_object) == 0)
{
printf_filtered ("File is not an object file\n");
return;
}
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
start_time = time (NULL);
for (s = abfd->sections; s; s = s->next)
if (s->flags & SEC_LOAD)
{
bfd_size_type section_size;
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
bfd_vma vma;
vma = bfd_get_section_vma (abfd, s) + load_offset;
section_size = bfd_section_size (abfd, s);
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
data_count += section_size;
printf_filtered ("%s\t: 0x%4x .. 0x%4x ",
bfd_get_section_name (abfd, s), vma,
vma + section_size);
gdb_flush (gdb_stdout);
monitor_printf ("load c r %x %x\r", vma, section_size);
monitor_expect ("load: loading ", NULL, 0);
monitor_expect ("\r", NULL, 0);
for (i = 0; i < section_size; i += 2048)
{
int numbytes;
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
char buf[2048];
numbytes = min (sizeof buf, section_size - i);
bfd_get_section_contents (abfd, s, buf, i, numbytes);
SERIAL_WRITE (desc, buf, numbytes);
if (hashmark)
{
putchar_unfiltered ('#');
gdb_flush (gdb_stdout);
}
} /* Per-packet (or S-record) loop */
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
monitor_expect_prompt (NULL, 0);
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
putchar_unfiltered ('\n');
} /* Loadable sections */
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
monitor_printf ("reg pc %x\r", bfd_get_start_address (abfd));
monitor_expect_prompt (NULL, 0);
monitor_printf ("reg npc %x\r", bfd_get_start_address (abfd) + 4);
monitor_expect_prompt (NULL, 0);
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
monitor_printf ("run\r");
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
end_time = time (NULL);
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
if (hashmark)
putchar_unfiltered ('\n');
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
report_transfer_performance (data_count, start_time, end_time);
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
pop_target ();
push_remote_target (monitor_get_dev_name (), 1);
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 09:42:34 +08:00
return_to_top_level (RETURN_QUIT);
}
/* Define the monitor command strings. Since these are passed directly
through to a printf style function, we may include formatting
strings. We also need a CR or LF on the end. */
/* need to pause the monitor for timing reasons, so slow it down */
static char *sparclet_inits[] = {"\n\r\r\n", NULL};
static struct monitor_ops sparclet_cmds ;
static void init_sparclet_cmds(void)
{
sparclet_cmds.flags = MO_CLR_BREAK_USES_ADDR |
MO_HEX_PREFIX |
MO_NO_ECHO_ON_OPEN |
MO_NO_ECHO_ON_SETMEM |
MO_RUN_FIRST_TIME |
MO_GETMEM_READ_SINGLE ; /* flags */
sparclet_cmds.init = sparclet_inits; /* Init strings */
sparclet_cmds.cont = "cont\r"; /* continue command */
sparclet_cmds.step = "step\r"; /* single step */
sparclet_cmds.stop = "\r"; /* break interrupts the program */
sparclet_cmds.set_break = "+bp %x\r"; /* set a breakpoint */
sparclet_cmds.clr_break = "-bp %x\r" ; /* can't use "br" because only 2 hw bps are supported */
sparclet_cmds.clr_all_break = "-bp %x\r"; /* clear a breakpoint */
"-bp\r" ; /* clear all breakpoints */
sparclet_cmds.fill = "fill %x -n %x -v %x -b\r"; /* fill (start length val) */
/* can't use "fi" because it takes words, not bytes */
/* ex [addr] [-n count] [-b|-s|-l] default: ex cur -n 1 -b */
sparclet_cmds.setmem.cmdb = "ex %x -b\r%x\rq\r"; /* setmem.cmdb (addr, value) */
sparclet_cmds.setmem.cmdw = "ex %x -s\r%x\rq\r"; /* setmem.cmdw (addr, value) */
sparclet_cmds.setmem.cmdl = "ex %x -l\r%x\rq\r"; /* setmem.cmdl (addr, value) */
sparclet_cmds.setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */
sparclet_cmds.setmem.resp_delim = NULL; /*": " */ /* setmem.resp_delim */
sparclet_cmds.setmem.term = NULL; /*"? " */ /* setmem.term */
sparclet_cmds.setmem.term_cmd = NULL; /*"q\r" */ /* setmem.term_cmd */
/* since the parsing of multiple bytes is difficult due to
interspersed addresses, we'll only read 1 value at a time,
even tho these can handle a count */
/* we can use -n to set count to read, but may have to parse? */
sparclet_cmds.getmem.cmdb = "ex %x -n 1 -b\r"; /* getmem.cmdb (addr, #bytes) */
sparclet_cmds.getmem.cmdw = "ex %x -n 1 -s\r"; /* getmem.cmdw (addr, #swords) */
sparclet_cmds.getmem.cmdl = "ex %x -n 1 -l\r"; /* getmem.cmdl (addr, #words) */
sparclet_cmds.getmem.cmdll = NULL; /* getmem.cmdll (addr, #dwords) */
sparclet_cmds.getmem.resp_delim = ": "; /* getmem.resp_delim */
sparclet_cmds.getmem.term = NULL; /* getmem.term */
sparclet_cmds.getmem.term_cmd = NULL; /* getmem.term_cmd */
sparclet_cmds.setreg.cmd = "reg %s 0x%x\r"; /* setreg.cmd (name, value) */
sparclet_cmds.setreg.resp_delim = NULL; /* setreg.resp_delim */
sparclet_cmds.setreg.term = NULL; /* setreg.term */
sparclet_cmds.setreg.term_cmd = NULL ; /* setreg.term_cmd */
sparclet_cmds.getreg.cmd = "reg %s\r"; /* getreg.cmd (name) */
sparclet_cmds.getreg.resp_delim = " "; /* getreg.resp_delim */
sparclet_cmds.getreg.term = NULL; /* getreg.term */
sparclet_cmds.getreg.term_cmd = NULL; /* getreg.term_cmd */
sparclet_cmds.dump_registers = "reg\r"; /* dump_registers */
sparclet_cmds.register_pattern = "\\(\\w+\\)=\\([0-9a-fA-F]+\\)"; /* register_pattern */
sparclet_cmds.supply_register = sparclet_supply_register; /* supply_register */
sparclet_cmds.load_routine = sparclet_load; /* load_routine */
sparclet_cmds.load = NULL; /* download command (srecs on console) */
sparclet_cmds.loadresp = NULL; /* load response */
sparclet_cmds.prompt = "monitor>"; /* monitor command prompt */
/* yikes! gdb core dumps without this delimitor!! */
sparclet_cmds.line_term = "\r"; /* end-of-command delimitor */
sparclet_cmds.cmd_end = NULL; /* optional command terminator */
sparclet_cmds.target = &sparclet_ops; /* target operations */
sparclet_cmds.stopbits = SERIAL_1_STOPBITS; /* number of stop bits */
sparclet_cmds.regnames = sparclet_regnames; /* registers names */
sparclet_cmds.magic = MONITOR_OPS_MAGIC ; /* magic */
};
static void
sparclet_open (args, from_tty)
char *args;
int from_tty;
{
monitor_open (args, &sparclet_cmds, from_tty);
}
void
_initialize_sparclet ()
{
int i;
init_sparclet_cmds() ;
for (i = 0; i < NUM_REGS; i++)
if (sparclet_regnames[i][0] == 'c' ||
sparclet_regnames[i][0] == 'a')
sparclet_regnames[i] = 0; /* mon can't report c* or a* regs */
sparclet_regnames[0] = 0; /* mon won't report %G0 */
init_monitor_ops (&sparclet_ops);
sparclet_ops.to_shortname = "sparclet"; /* for the target command */
sparclet_ops.to_longname = "SPARC Sparclet monitor";
/* use SW breaks; target only supports 2 HW breakpoints */
sparclet_ops.to_insert_breakpoint = memory_insert_breakpoint;
sparclet_ops.to_remove_breakpoint = memory_remove_breakpoint;
sparclet_ops.to_doc =
"Use a board running the Sparclet debug monitor.\n\
Specify the serial device it is connected to (e.g. /dev/ttya).";
sparclet_ops.to_open = sparclet_open;
add_target (&sparclet_ops);
}