binutils-gdb/gdb/auxv.c

290 lines
9.0 KiB
C
Raw Normal View History

/* Auxiliary vector support for GDB, the GNU debugger.
Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "target.h"
#include "gdbtypes.h"
#include "command.h"
#include "inferior.h"
#include "valprint.h"
#include "gdb_assert.h"
#include "auxv.h"
#include "elf/common.h"
#include <unistd.h>
#include <fcntl.h>
/* This function is called like a to_xfer_partial hook, but must be
called with TARGET_OBJECT_AUXV. It handles access via
/proc/PID/auxv, which is a common method for native targets. */
LONGEST
procfs_xfer_auxv (struct target_ops *ops,
enum target_object object,
const char *annex,
gdb_byte *readbuf,
const gdb_byte *writebuf,
ULONGEST offset,
LONGEST len)
{
char *pathname;
int fd;
LONGEST n;
gdb_assert (object == TARGET_OBJECT_AUXV);
gdb_assert (readbuf || writebuf);
pathname = xstrprintf ("/proc/%d/auxv", PIDGET (inferior_ptid));
fd = open (pathname, writebuf != NULL ? O_WRONLY : O_RDONLY);
xfree (pathname);
if (fd < 0)
return -1;
if (offset != (ULONGEST) 0
&& lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset)
n = -1;
else if (readbuf != NULL)
n = read (fd, readbuf, len);
else
n = write (fd, writebuf, len);
(void) close (fd);
return n;
}
/* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
Return 0 if *READPTR is already at the end of the buffer.
Return -1 if there is insufficient buffer for a whole entry.
Return 1 if an entry was read into *TYPEP and *VALP. */
2008-02-21 Pedro Alves <pedro@codesorcery.com> Silence a few -Wmissing-prototypes warnings. PR build/9877: * amd64-nat.c: Include "amd64-nat.h". * fork-child.c (_initialize_fork_child): Ditto. * gcore.c (_initialize_gcore): Ditto. * inf-ptrace.c: Include "inf-ptrace.h". (inf_ptrace_store_registers): Make it static. * linux-nat.c (linux_nat_terminal_ours): Make it static. (_initialize_linux_nat): Declare before definition. * linux-tdep.c: Include "linux-tdep.h". * linux-thread-db.c (_initialize_thread_db): Declare before definition. * proc-service.c (_initialize_proc_service): Ditto. * remote.c (remote_send_printf): Make it static. * solib.c: Include "solib.h". * symfile-mem.c (_initialize_symfile_mem): Declare before definition. * ada-lang.c (ada_la_decode, ada_match_name) (ada_suppress_symbol_printing, ada_is_array_type) (ada_value_ptr_subscript, ada_array_length) (ada_to_static_fixed_value): Make them static. (_initialize_ada_language): Declare before definition. * ada-tasks.c (ada_get_task_number, ada_get_environment_task) (ada_task_list_changed, ada_new_objfile_observer): Make them static. (_initialize_tasks): Declare before definition. * addrmap.c (_initialize_addrmap): Declare before definition. * auxv.c (default_auxv_parse): Make it static. * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make them static. * breakpoint.c (remove_sal): Add line break. (expand_line_sal_maybe): Make it static. * cp-name-parser.y: Include "cp-support.h". * cp-valprint.c (cp_find_class_member): Make it static. * eval.c (value_f90_subarray): Ditto. * exceptions.c (print_any_exception): Ditto. * findcmd.c (_initialize_mem_search): Declare before definition. * frame.c (frame_observer_target_changed): Make it static. * gnu-v3-abi.c (gnuv3_find_method_in): Make it static. * inf-child.c: Include "inf-child.h". * inferior.h (valid_inferior_id): Rename to ... (valid_gdb_inferior_id): ... this. * infrun.c (infrun_thread_stop_requested, siginfo_make_value): Make them static. * jv-lang.c (java_language_arch_info): Make it static. * m2-typeprint.c (m2_get_discrete_bounds): Ditto. * osdata.c (info_osdata_command): Make it static. * regcache.c (regcache_observer_target_changed): Make it static. * reverse.c (_initialize_reverse): Declare before definition. * stabsread.c (cleanup_undefined_types_noname) (cleanup_undefined_types_1): Make them static. * symfile.c (place_section): Make it static. * symtab.c (find_pc_sect_psymtab_closer): Make it static. * target-descriptions.c (_initialize_target_descriptions): Declare before definition. * target.c (default_get_ada_task_ptid, find_default_can_async_p) (find_default_is_async_p, find_default_supports_non_stop): Make them static. (target_supports_non_stop): Add prototype. (dummy_pid_to_str): Make it static. * utils.c (_initialize_utils): Declare before definition. * ada-exp.y (_initialize_ada_exp): Declare before definition. * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype. * target.h (struct target_ops): Add a prototype to the to_can_execute_reverse callback. * macroscope.c (_initialize_macroscope): Declare before definition. * cp-namespace.c (_initialize_cp_namespace): Declare before definition. * python/python.c (_initialize_python): Declare before definition. * tui/tui-command.c: Include "tui/tui-command.h". * tui/tui-data.c (init_content_element, init_win_info): Make them static. * tui/tui-disasm.c: Include "tui/tui-disasm.h". * tui/tui-interp.c (_initialize_tui_interp): Declare before definition. * tui/tui-layout.c: Include "tui/tui-layout.h". (_initialize_tui_layout): Declare before definition. * tui/tui-regs.c: Include "tui/tui-regs.h". (tui_display_reg_element_at_line): Make it static. (_initialize_tui_regs): Declare before definition. * tui/tui-stack.c (_initialize_tui_stack): Declare before definition. * tui/tui-win.c: Include "tui/tui-win.h". (_initialize_tui_win): Declare before definition. (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH. * tui/tui-win.h (tui_sigwinch_handler): Delete declaration. (tui_get_cmd_list): Add a prototype. * tui/tui-windata.c: Include tui-windata.h. * tui/tui-wingeneral.c (box_win): Make it static. * cli/cli-logging.c (show_logging_command): Make it static. (_initialize_cli_logging): Declare before definition. * mi/mi-common.c (_initialize_gdb_mi_common): Declare before definition.
2009-02-22 00:14:50 +08:00
static int
default_auxv_parse (struct target_ops *ops, gdb_byte **readptr,
gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp)
{
const int sizeof_auxv_field = gdbarch_ptr_bit (target_gdbarch)
/ TARGET_CHAR_BIT;
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-03 01:25:59 +08:00
const enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch);
gdb_byte *ptr = *readptr;
if (endptr == ptr)
return 0;
if (endptr - ptr < sizeof_auxv_field * 2)
return -1;
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-03 01:25:59 +08:00
*typep = extract_unsigned_integer (ptr, sizeof_auxv_field, byte_order);
ptr += sizeof_auxv_field;
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-03 01:25:59 +08:00
*valp = extract_unsigned_integer (ptr, sizeof_auxv_field, byte_order);
ptr += sizeof_auxv_field;
*readptr = ptr;
return 1;
}
/* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
Return 0 if *READPTR is already at the end of the buffer.
Return -1 if there is insufficient buffer for a whole entry.
Return 1 if an entry was read into *TYPEP and *VALP. */
int
target_auxv_parse (struct target_ops *ops, gdb_byte **readptr,
gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp)
{
struct target_ops *t;
for (t = ops; t != NULL; t = t->beneath)
if (t->to_auxv_parse != NULL)
return t->to_auxv_parse (t, readptr, endptr, typep, valp);
return default_auxv_parse (ops, readptr, endptr, typep, valp);
}
/* Extract the auxiliary vector entry with a_type matching MATCH.
Return zero if no such entry was found, or -1 if there was
an error getting the information. On success, return 1 after
storing the entry's value field in *VALP. */
int
target_auxv_search (struct target_ops *ops, CORE_ADDR match, CORE_ADDR *valp)
{
CORE_ADDR type, val;
gdb_byte *data;
LONGEST n = target_read_alloc (ops, TARGET_OBJECT_AUXV, NULL, &data);
gdb_byte *ptr = data;
int ents = 0;
if (n <= 0)
return n;
while (1)
switch (target_auxv_parse (ops, &ptr, data + n, &type, &val))
{
case 1: /* Here's an entry, check it. */
if (type == match)
{
xfree (data);
*valp = val;
return 1;
}
break;
case 0: /* End of the vector. */
xfree (data);
return 0;
default: /* Bogosity. */
xfree (data);
return -1;
}
/*NOTREACHED*/
}
/* Print the contents of the target's AUXV on the specified file. */
int
fprint_target_auxv (struct ui_file *file, struct target_ops *ops)
{
CORE_ADDR type, val;
gdb_byte *data;
LONGEST len = target_read_alloc (ops, TARGET_OBJECT_AUXV, NULL,
&data);
gdb_byte *ptr = data;
int ents = 0;
if (len <= 0)
return len;
while (target_auxv_parse (ops, &ptr, data + len, &type, &val) > 0)
{
const char *name = "???";
const char *description = "";
enum { dec, hex, str } flavor = hex;
switch (type)
{
#define TAG(tag, text, kind) \
case tag: name = #tag; description = text; flavor = kind; break
TAG (AT_NULL, _("End of vector"), hex);
TAG (AT_IGNORE, _("Entry should be ignored"), hex);
TAG (AT_EXECFD, _("File descriptor of program"), dec);
TAG (AT_PHDR, _("Program headers for program"), hex);
TAG (AT_PHENT, _("Size of program header entry"), dec);
TAG (AT_PHNUM, _("Number of program headers"), dec);
TAG (AT_PAGESZ, _("System page size"), dec);
TAG (AT_BASE, _("Base address of interpreter"), hex);
TAG (AT_FLAGS, _("Flags"), hex);
TAG (AT_ENTRY, _("Entry point of program"), hex);
TAG (AT_NOTELF, _("Program is not ELF"), dec);
TAG (AT_UID, _("Real user ID"), dec);
TAG (AT_EUID, _("Effective user ID"), dec);
TAG (AT_GID, _("Real group ID"), dec);
TAG (AT_EGID, _("Effective group ID"), dec);
TAG (AT_CLKTCK, _("Frequency of times()"), dec);
TAG (AT_PLATFORM, _("String identifying platform"), str);
TAG (AT_HWCAP, _("Machine-dependent CPU capability hints"), hex);
TAG (AT_FPUCW, _("Used FPU control word"), dec);
TAG (AT_DCACHEBSIZE, _("Data cache block size"), dec);
TAG (AT_ICACHEBSIZE, _("Instruction cache block size"), dec);
TAG (AT_UCACHEBSIZE, _("Unified cache block size"), dec);
TAG (AT_IGNOREPPC, _("Entry should be ignored"), dec);
TAG (AT_BASE_PLATFORM, _("String identifying base platform"), str);
TAG (AT_RANDOM, _("Address of 16 random bytes"), hex);
TAG (AT_EXECFN, _("File name of executable"), str);
TAG (AT_SECURE, _("Boolean, was exec setuid-like?"), dec);
TAG (AT_SYSINFO, _("Special system info/entry points"), hex);
TAG (AT_SYSINFO_EHDR, _("System-supplied DSO's ELF header"), hex);
TAG (AT_SUN_UID, _("Effective user ID"), dec);
TAG (AT_SUN_RUID, _("Real user ID"), dec);
TAG (AT_SUN_GID, _("Effective group ID"), dec);
TAG (AT_SUN_RGID, _("Real group ID"), dec);
TAG (AT_SUN_LDELF, _("Dynamic linker's ELF header"), hex);
TAG (AT_SUN_LDSHDR, _("Dynamic linker's section headers"), hex);
TAG (AT_SUN_LDNAME, _("String giving name of dynamic linker"), str);
TAG (AT_SUN_LPAGESZ, _("Large pagesize"), dec);
TAG (AT_SUN_PLATFORM, _("Platform name string"), str);
TAG (AT_SUN_HWCAP, _("Machine-dependent CPU capability hints"), hex);
TAG (AT_SUN_IFLUSH, _("Should flush icache?"), dec);
TAG (AT_SUN_CPU, _("CPU name string"), str);
TAG (AT_SUN_EMUL_ENTRY, _("COFF entry point address"), hex);
TAG (AT_SUN_EMUL_EXECFD, _("COFF executable file descriptor"), dec);
TAG (AT_SUN_EXECNAME,
_("Canonicalized file name given to execve"), str);
TAG (AT_SUN_MMU, _("String for name of MMU module"), str);
TAG (AT_SUN_LDDATA, _("Dynamic linker's data segment address"), hex);
TAG (AT_SUN_AUXFLAGS,
_("AF_SUN_ flags passed from the kernel"), hex);
}
fprintf_filtered (file, "%-4s %-20s %-30s ",
plongest (type), name, description);
switch (flavor)
{
case dec:
fprintf_filtered (file, "%s\n", plongest (val));
break;
case hex:
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-03 01:21:10 +08:00
fprintf_filtered (file, "%s\n", paddress (target_gdbarch, val));
break;
case str:
gdb * varobj.c (value_get_print_value): Include valprint.h. (value_get_print_value): Use get_formatted_print_options. * value.h (struct value_print_options): Declare. (value_print, val_print, common_val_print, val_print_string): Update. * value.c: Include valprint.h. (show_values): Use get_user_print_options. (show_convenience): Likewise. * valprint.h (prettyprint_arrays, prettyprint_structs): Don't declare. (struct value_print_options): New type. (vtblprint, unionprint, addressprint, objectprint, print_max, inspect_it, repeat_count_threshold, output_format, stop_print_at_null): Don't declare. (user_print_options, get_user_print_options, get_raw_print_options, get_formatted_print_options): Declare. (print_array_indexes_p): Don't declare. (maybe_print_array_index, val_print_array_elements): Update. * valprint.c (print_max): Remove. (user_print_options): New global. (get_user_print_options, get_raw_print_options, get_formatted_print_options): New functions. (print_array_indexes, repeat_count_threshold, stop_print_at_null, prettyprint_structs, prettyprint_arrays, unionprint, addressprint): Remove. (val_print): Remove format, deref_ref, pretty arguments; add options. Update. (common_val_print): Likewise. (print_array_indexes_p): Remove. (maybe_print_array_index): Remove format, pretty arguments; add options. Update. (val_print_array_elements): Remove format, deref_ref, pretty arguments; add options. Update. (val_print_string): Add options argument. Update. (_initialize_valprint): Use user_print_options. (output_format): Remove. (set_output_radix_1): Use user_print_options. * typeprint.c: Include valprint.h. (objectprint): Don't declare. (whatis_exp): Use get_user_print_options. * tui/tui-regs.c: Include valprint.h. (tui_register_format): Use get_formatted_print_options. * tracepoint.c: Include valprint.h. (addressprint): Don't declare. (trace_mention): Use get_user_print_options. (tracepoints_info): Likewise. * stack.c (print_frame_args): Use get_raw_print_options. (print_frame_info): Use get_user_print_options. (print_frame): Likewise. * sh64-tdep.c: Include valprint.h (sh64_do_register): Use get_formatted_print_options. * scm-valprint.c (scm_inferior_print): Remove format, deref_ref, pretty arguments; add options. (scm_scmlist_print): Likewise. Update. (scm_scmval_print): Likewise. (scm_val_print): Likewise. (scm_value_print): Remove format, pretty arguments; add options. Update. * scm-lang.h (scm_value_print, scm_val_print, scm_scmval_print): Update. * scm-lang.c (scm_printstr): Add options argument. * python/python-value.c: Include valprint.h. (valpy_str): Use get_user_print_options. * printcmd.c: Include valprint.h. (addressprint): Don't declare. (inspect_it): Remove. (print_formatted): Remove format option; add options. Update. (print_scalar_formatted): Likewise. (print_address_demangle): Use get_user_print_options. (do_examine): Use get_formatted_print_options. (print_command_1): Likewise. (output_command): Use get_formatted_print_options. (do_one_display): Likewise. (print_variable_value): Use get_user_print_options. * p-valprint.c (pascal_val_print): Remove format, deref_ref, pretty arguments; add options. Update. (pascal_value_print): Remove format, pretty arguments; add options. Update. (vtblprint, objectprint): Don't declare. (pascal_static_field_print): Remove. (pascal_object_print_value_fields): Remove format, pretty arguments; add options. Update. (pascal_object_print_static_field): Likewise. (_initialize_pascal_valprint): Use user_print_options. Update. * p-lang.h (pascal_val_print, pascal_value_print, pascal_printstr, pascal_object_print_value_fields): Update. (vtblprint, static_field_print): Don't declare. * p-lang.c (pascal_printstr): Add options argument. Update. * objc-lang.c (objc_printstr): Add options argument. Update. * mt-tdep.c: Include valprint.h. (mt_registers_info): Use get_raw_print_options. * mips-tdep.c: Include valprint.h. (mips_print_fp_register): Use get_formatted_print_options. (mips_print_register): Likewise. * mi/mi-main.c: Include valprint.h. (get_register): Use get_user_print_options. (mi_cmd_data_evaluate_expression): Likewise. (mi_cmd_data_read_memory): Use get_formatted_print_options. * mi/mi-cmd-stack.c: Include valprint.h. (list_args_or_locals): Use get_raw_print_options. * m2-valprint.c (print_function_pointer_address): Add addressprint argument. (m2_print_long_set): Remove format, pretty arguments. (m2_print_unbounded_array): Remove format, deref_ref, pretty arguments; add options. Update. (print_unpacked_pointer): Remove format argument; add options. Now static. Update. (print_variable_at_address): Remove format, deref_ref, pretty arguments; add options. Update. (m2_print_array_contents): Likewise. (m2_val_print): Likewise. * m2-lang.h (m2_val_print): Update. * m2-lang.c (m2_printstr): Add options argument. Update. * language.h (struct value_print_options): Declare. (struct language_defn) <la_printstr>: Add options argument. <la_val_print>: Remove format, deref_ref, pretty argument; add options. <la_value_print>: Remove format, pretty arguments; add options. <la_print_array_index>: Likewise. (LA_VAL_PRINT, LA_VALUE_PRINT, LA_PRINT_STRING, LA_PRINT_ARRAY_INDEX): Update. (default_print_array_index): Update. * language.c (default_print_array_index): Remove format, pretty arguments; add options. Update. (unk_lang_printstr): Add options argument. (unk_lang_val_print): Remove format, deref_ref, pretty arguments; add options. (unk_lang_value_print): Remove format, pretty arguments; add options. * jv-valprint.c (java_value_print): Remove format, pretty arguments; add options. Update. (java_print_value_fields): Likewise. (java_val_print): Remove format, deref_ref, pretty arguments; add options. Update. * jv-lang.h (java_val_print, java_value_print): Declare. * infcmd.c: Include valprint.h. (print_return_value): Use get_raw_print_options. (default_print_registers_info): Use get_user_print_options, get_formatted_print_options. (registers_info): Use get_formatted_print_options. * gdbtypes.h (struct value_print_options): Declare. (print_scalar_formatted): Update. * f-valprint.c (f77_print_array_1): Remove format, deref_ref, pretty arguments; add options. Update. (f77_print_array): Likewise. (f_val_print): Likewise. * f-lang.h (f_val_print): Update. * f-lang.c (f_printstr): Add options argument. Update. (c_value_print): Update declaration. * expprint.c: Include valprint.h. (print_subexp_standard): Use get_raw_print_options, get_user_print_options. * eval.c: Include valprint.h. (objectprint): Don't declare. (evaluate_subexp_standard): Use get_user_print_options. * cp-valprint.c (vtblprint, objectprint, static_field_print): Remove. (cp_print_value_fields): Remove format, pretty arguments; add options. Update. (cp_print_value): Likewise. (cp_print_static_field): Likewise. (_initialize_cp_valprint): Use user_print_options. Update. * c-valprint.c (print_function_pointer_address): Add addressprint argument. (c_val_print): Remove format, deref_ref, pretty arguments; add options. Update. (c_value_print): Add options argument. Update. * c-lang.h (c_val_print, c_value_print, c_printstr): Update. (vtblprint, static_field_print): Don't declare. (cp_print_value_fields): Update. * c-lang.c (c_printstr): Add options argument. Update. * breakpoint.c: Include valprint.h. (addressprint): Don't declare. (watchpoint_value_print): Use get_user_print_options. (print_one_breakpoint_location): Likewise. (breakpoint_1, print_it_catch_fork, print_it_catch_vfork, mention, print_exception_catchpoint): Likewise. * auxv.c (fprint_target_auxv): Don't declare addressprint. Use get_user_print_options. * ada-valprint.c (struct ada_val_print_args): Remove format, deref_ref, and pretty; add options. (print_optional_low_bound): Add options argument. (val_print_packed_array_elements): Remove format and pretty arguments; add options. Update. (printstr): Add options argument. Update. (ada_printstr): Likewise. (ada_val_print): Remove format, deref_ref, pretty arguments; add options argument. Update. (ada_val_print_stub): Update. (ada_val_print_array): Remove format, deref_ref, pretty arguments; add options. Update. (ada_val_print_1): Likewise. (print_variant_part): Likewise. (ada_value_print): Remove format, pretty arguments; add options. Update. (print_record): Likewise. (print_field_values): Likewise. * ada-lang.h (ada_val_print, ada_value_print, ada_printstr): Update. * ada-lang.c (ada_print_array_index): Add options argument; remove format and pretty arguments. (print_one_exception): Use get_user_print_options. gdb/testsuite * gdb.base/exprs.exp (test_expr): Add enum formatting tests.
2008-10-29 01:19:58 +08:00
{
struct value_print_options opts;
get_user_print_options (&opts);
if (opts.addressprint)
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-03 01:21:10 +08:00
fprintf_filtered (file, "%s", paddress (target_gdbarch, val));
gdb: 2009-03-19 Tom Tromey <tromey@redhat.com> Julian Brown <julian@codesourcery.com> PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103, PR i18n/9401, PR exp/9613: * NEWS: Update * value.h (value_typed_string): Declare. (val_print_string): Update. * valprint.h (print_char_chars): Update. * valprint.c (print_char_chars): Add type argument. Update. (val_print_string): Likewise. * valops.c (value_typed_string): New function. * utils.c (host_char_to_target): New function. (parse_escape): Use host_char_to_target, host_hex_value. Update. Remove '^' case. (no_control_char_error): Remove. * typeprint.c (print_type_scalar): Update. * scm-valprint.c (scm_scmval_print): Update. * scm-lang.h (scm_printchar, scm_printstr): Update. * scm-lang.c (scm_printchar): Add type argument. (scm_printstr): Likewise. * printcmd.c (print_formatted): Update. (print_scalar_formatted): Update. (printf_command) <wide_string_arg, wide_char_arg>: New constants. Handle '%lc' and '%ls'. * parser-defs.h (struct typed_stoken): New type. (struct stoken_vector): Likewise. (write_exp_string_vector): Declare. * parse.c (write_exp_string_vector): New function. * p-valprint.c (pascal_val_print): Update. * p-lang.h (is_pascal_string_type, pascal_printchar, pascal_printstr): Update. * p-lang.c (is_pascal_string_type): Remove 'char_size' argument. Add 'char_type' argument. (pascal_emit_char): Add type argument. (pascal_printchar): Likewise. (pascal_printstr): Likewise. * objc-lang.c (objc_emit_char): Add type argument. (objc_printchar): Likewise. (objc_printstr): Likewise. * macroexp.c (get_character_constant): Handle unicode characters. Use c_parse_escape. (get_string_literal): Handle unicode strings. Use c_parse_escape. * m2-valprint.c (print_unpacked_pointer): Update. (m2_print_array_contents): Update. (m2_val_print): Update. * m2-lang.c (m2_emit_char): Add type argument. (m2_printchar): Likewise. (m2_printstr): Likewise. * language.h (struct language_defn) <la_printchar>: Add type argument. <la_printstr, la_emitchar>: Likewise. (LA_PRINT_CHAR): Likewise. (LA_PRINT_STRING): Likewise. (LA_EMIT_CHAR): Likewise. * language.c (unk_lang_emit_char): Add type argument. (unk_lang_printchar): Likewise. (unk_lang_printstr): Likewise. * jv-valprint.c (java_val_print): Update. * jv-lang.c (java_emit_char): Add type argument. * f-valprint.c (f_val_print): Update. * f-lang.c (f_emit_char): Add type argument. (f_printchar): Likewise. (f_printstr): Likewise. * expprint.c (print_subexp_standard): Update. * charset.h (target_wide_charset): Declare. (c_target_char_has_backslash_escape, c_parse_backslash, host_char_print_literally, host_char_to_target, target_char_to_host, target_char_to_control_char): Remove. (enum transliterations): New type. (convert_between_encodings): Declare. (HOST_ESCAPE_CHAR): New define. (host_letter_to_control_character, host_hex_value): Declare. (enum wchar_iterate_result): New enum. (struct wchar_iterator): Declare. (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator, wchar_push_back): Declare. * charset-list.h: New file. * c-valprint.c (textual_name): New function. (textual_element_type): Handle wide character types. (c_val_print): Pass original type to textual_element_type. Handle wide character types. (c_value_print): Use textual_element_type. Pass original type of value to val_print. * c-lang.h (enum c_string_type): New type. (c_printchar, c_printstr): Update. * c-lang.c (classify_type): New function. (print_wchar): Likewise. (c_emit_char): Add type argument. Handle wide characters. (c_printchar): Likewise. (c_printstr): Add type argument. Handle wide and multibyte character sets. (convert_ucn): New function. (emit_numeric_character): Likewise. (convert_octal): Likewise. (convert_hex): Likewise. (ADVANCE): New macro. (convert_escape): New function. (parse_one_string): Likewise. (evaluate_subexp_c): Likewise. (exp_descriptor_c): New global. (c_language_defn): Use exp_descriptor_c. (cplus_language_defn): Likewise. (asm_language_defn): Likewise. (minimal_language_defn): Likewise. (charset_for_string_type): New function. * c-exp.y (%union): Add 'svec' and 'tsval'. (CHAR): New token. (exp): Add CHAR production. (string_exp): Rewrite. (exp) <string_exp>: Rewrite. (tempbuf): Now global. (tempbuf_init): New global. (parse_string_or_char): New function. (yylex) <tempbuf>: Now global. <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>: Remove. Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char. (c_parse_escape): New function. * auxv.c (fprint_target_auxv): Update. * ada-valprint.c (ada_emit_char): Add type argument. (ada_printchar): Likewise. (ada_print_scalar): Update. (printstr): Add type argument. Update calls to ada_emit_char. (ada_printstr): Add type argument. (ada_val_print_array): Update. (ada_val_print_1): Likewise. * ada-lang.c (emit_char): Add type argument. * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add type arguments. * gdb_locale.h: Include langinfo.h. * charset.c (_initialize_charset): Set default host charset from the locale. Don't register charsets. Add target-wide-charset commands. Call find_charset_names. (struct charset, struct translation): Remove. (GDB_DEFAULT_HOST_CHARSET): Remove. (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define. (target_wide_charset_name): New global. (show_host_charset_name): Handle "auto". (show_target_wide_charset_name): New function. (host_charset_enum, target_charset_enum): Remove. (charset_enum): New global. (all_charsets, register_charset, lookup_charset, all_translations, register_translation, lookup_translation): Remove. (simple_charset, ascii_print_literally, ascii_to_control): Remove. (iso_8859_print_literally, iso_8859_to_control, iso_8859_family_charset): Remove. (ebcdic_print_literally, ebcdic_to_control, ebcdic_family_charset): Remove. (struct cached_iconv, check_iconv_cache, cached_iconv_convert, register_iconv_charsets): Remove. (target_wide_charset_be_name, target_wide_charset_le_name): New globals. (identity_either_char_to_other): Remove. (set_be_le_names, validate): New functions. (backslashable, backslashed, represented): Remove. (default_c_target_char_has_backslash_escape): Remove. (default_c_parse_backslash, iconv_convert): Remove. (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table, ascii_to_ibm1047_table, iso_8859_1_to_ascii_table, iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table, ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table, ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table, ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove. (table_convert_char, table_translation, simple_table_translation): Remove. (current_host_charset, current_target_charset, c_target_char_has_backslash_escape_func, c_target_char_has_backslash_escape_baton): Remove. (c_parse_backslash_func, c_parse_backslash_baton): Remove. (host_char_to_target_func, host_char_to_target_baton): Remove. (target_char_to_host_func, target_char_to_host_baton): Remove. (cached_iconv_host_to_target, cached_iconv_target_to_host): Remove. (lookup_charset_or_error, check_valid_host_charset): Remove. (set_host_and_target_charsets): Remove. (set_host_charset, set_target_charset): Remove. (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite. (set_target_wide_charset_sfunc): New function. (show_charset): Print target wide character set. (host_charset, target_charset): Rewrite. (target_wide_charset): New function. (c_target_char_has_backslash_escape): Remove. (c_parse_backslash): Remove. (host_letter_to_control_character): New function. (host_char_print_literally): Remove. (host_hex_value): New function. (target_char_to_control_char): Remove. (cleanup_iconv): New function. (convert_between_encodings): New function. (target_char_to_host): Remove. (struct wchar_iterator): Define. (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator, wchar_push_back): New functions. (do_cleanup_iterator): New function. (char_ptr): New typedef. (charsets): New global. (add_one, find_charset_names): New functions. (default_charset_names): New global. (auto_host_charset_name): Likewise. * aclocal.m4, config.in, configure: Rebuild. * configure.ac: Call AM_LANGINFO_CODESET. (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8. (AM_ICONV): Invoke earlier. * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and LIBICONV_LIBDIR. Check for libiconv in build tree. * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros. (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE. (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR. * gdb_obstack.h (obstack_grow_wstr): New define. * gdb_wchar.h: New file. * defs.h: Include it. gdb/testsuite: * gdb.base/store.exp: Update for change to escape output. * gdb.base/callfuncs.exp (fetch_all_registers): Update for change to escape output. * gdb.base/pointers.exp: Update for change to escape output. * gdb.base/long_long.exp (gdb_test_long_long): Update for change to escape output. * gdb.base/constvars.exp (do_constvar_tests): Update for change to escape output. * gdb.base/call-rt-st.exp (print_struct_call): Update for change to escape output. * gdb.cp/ref-types.exp (gdb_start_again): Update for change to escape output. * gdb.base/setvar.exp: Update for change to escape output. * lib/gdb.exp (default_gdb_start): Set LC_CTYPE to C. * gdb.base/printcmds.exp (test_print_all_chars): Update for change to escape output. (test_print_string_constants): Likewise. * gdb.base/charset.exp (valid_host_charset): Check size of wchar_t. Handle UCS-2 and UCS-4. Add tests for wide and unicode cases. Handle "auto"-related output. * gdb.base/charset.c (char16_t, char32_t): New typedefs. (uvar, Uvar): New globals. gdb/doc: * gdb.texinfo (Character Sets): Remove obsolete text. Document set target-wide-charset. (Requirements): Mention iconv.
2009-03-21 07:04:40 +08:00
val_print_string (builtin_type (target_gdbarch)->builtin_char,
val, -1, file, &opts);
gdb * varobj.c (value_get_print_value): Include valprint.h. (value_get_print_value): Use get_formatted_print_options. * value.h (struct value_print_options): Declare. (value_print, val_print, common_val_print, val_print_string): Update. * value.c: Include valprint.h. (show_values): Use get_user_print_options. (show_convenience): Likewise. * valprint.h (prettyprint_arrays, prettyprint_structs): Don't declare. (struct value_print_options): New type. (vtblprint, unionprint, addressprint, objectprint, print_max, inspect_it, repeat_count_threshold, output_format, stop_print_at_null): Don't declare. (user_print_options, get_user_print_options, get_raw_print_options, get_formatted_print_options): Declare. (print_array_indexes_p): Don't declare. (maybe_print_array_index, val_print_array_elements): Update. * valprint.c (print_max): Remove. (user_print_options): New global. (get_user_print_options, get_raw_print_options, get_formatted_print_options): New functions. (print_array_indexes, repeat_count_threshold, stop_print_at_null, prettyprint_structs, prettyprint_arrays, unionprint, addressprint): Remove. (val_print): Remove format, deref_ref, pretty arguments; add options. Update. (common_val_print): Likewise. (print_array_indexes_p): Remove. (maybe_print_array_index): Remove format, pretty arguments; add options. Update. (val_print_array_elements): Remove format, deref_ref, pretty arguments; add options. Update. (val_print_string): Add options argument. Update. (_initialize_valprint): Use user_print_options. (output_format): Remove. (set_output_radix_1): Use user_print_options. * typeprint.c: Include valprint.h. (objectprint): Don't declare. (whatis_exp): Use get_user_print_options. * tui/tui-regs.c: Include valprint.h. (tui_register_format): Use get_formatted_print_options. * tracepoint.c: Include valprint.h. (addressprint): Don't declare. (trace_mention): Use get_user_print_options. (tracepoints_info): Likewise. * stack.c (print_frame_args): Use get_raw_print_options. (print_frame_info): Use get_user_print_options. (print_frame): Likewise. * sh64-tdep.c: Include valprint.h (sh64_do_register): Use get_formatted_print_options. * scm-valprint.c (scm_inferior_print): Remove format, deref_ref, pretty arguments; add options. (scm_scmlist_print): Likewise. Update. (scm_scmval_print): Likewise. (scm_val_print): Likewise. (scm_value_print): Remove format, pretty arguments; add options. Update. * scm-lang.h (scm_value_print, scm_val_print, scm_scmval_print): Update. * scm-lang.c (scm_printstr): Add options argument. * python/python-value.c: Include valprint.h. (valpy_str): Use get_user_print_options. * printcmd.c: Include valprint.h. (addressprint): Don't declare. (inspect_it): Remove. (print_formatted): Remove format option; add options. Update. (print_scalar_formatted): Likewise. (print_address_demangle): Use get_user_print_options. (do_examine): Use get_formatted_print_options. (print_command_1): Likewise. (output_command): Use get_formatted_print_options. (do_one_display): Likewise. (print_variable_value): Use get_user_print_options. * p-valprint.c (pascal_val_print): Remove format, deref_ref, pretty arguments; add options. Update. (pascal_value_print): Remove format, pretty arguments; add options. Update. (vtblprint, objectprint): Don't declare. (pascal_static_field_print): Remove. (pascal_object_print_value_fields): Remove format, pretty arguments; add options. Update. (pascal_object_print_static_field): Likewise. (_initialize_pascal_valprint): Use user_print_options. Update. * p-lang.h (pascal_val_print, pascal_value_print, pascal_printstr, pascal_object_print_value_fields): Update. (vtblprint, static_field_print): Don't declare. * p-lang.c (pascal_printstr): Add options argument. Update. * objc-lang.c (objc_printstr): Add options argument. Update. * mt-tdep.c: Include valprint.h. (mt_registers_info): Use get_raw_print_options. * mips-tdep.c: Include valprint.h. (mips_print_fp_register): Use get_formatted_print_options. (mips_print_register): Likewise. * mi/mi-main.c: Include valprint.h. (get_register): Use get_user_print_options. (mi_cmd_data_evaluate_expression): Likewise. (mi_cmd_data_read_memory): Use get_formatted_print_options. * mi/mi-cmd-stack.c: Include valprint.h. (list_args_or_locals): Use get_raw_print_options. * m2-valprint.c (print_function_pointer_address): Add addressprint argument. (m2_print_long_set): Remove format, pretty arguments. (m2_print_unbounded_array): Remove format, deref_ref, pretty arguments; add options. Update. (print_unpacked_pointer): Remove format argument; add options. Now static. Update. (print_variable_at_address): Remove format, deref_ref, pretty arguments; add options. Update. (m2_print_array_contents): Likewise. (m2_val_print): Likewise. * m2-lang.h (m2_val_print): Update. * m2-lang.c (m2_printstr): Add options argument. Update. * language.h (struct value_print_options): Declare. (struct language_defn) <la_printstr>: Add options argument. <la_val_print>: Remove format, deref_ref, pretty argument; add options. <la_value_print>: Remove format, pretty arguments; add options. <la_print_array_index>: Likewise. (LA_VAL_PRINT, LA_VALUE_PRINT, LA_PRINT_STRING, LA_PRINT_ARRAY_INDEX): Update. (default_print_array_index): Update. * language.c (default_print_array_index): Remove format, pretty arguments; add options. Update. (unk_lang_printstr): Add options argument. (unk_lang_val_print): Remove format, deref_ref, pretty arguments; add options. (unk_lang_value_print): Remove format, pretty arguments; add options. * jv-valprint.c (java_value_print): Remove format, pretty arguments; add options. Update. (java_print_value_fields): Likewise. (java_val_print): Remove format, deref_ref, pretty arguments; add options. Update. * jv-lang.h (java_val_print, java_value_print): Declare. * infcmd.c: Include valprint.h. (print_return_value): Use get_raw_print_options. (default_print_registers_info): Use get_user_print_options, get_formatted_print_options. (registers_info): Use get_formatted_print_options. * gdbtypes.h (struct value_print_options): Declare. (print_scalar_formatted): Update. * f-valprint.c (f77_print_array_1): Remove format, deref_ref, pretty arguments; add options. Update. (f77_print_array): Likewise. (f_val_print): Likewise. * f-lang.h (f_val_print): Update. * f-lang.c (f_printstr): Add options argument. Update. (c_value_print): Update declaration. * expprint.c: Include valprint.h. (print_subexp_standard): Use get_raw_print_options, get_user_print_options. * eval.c: Include valprint.h. (objectprint): Don't declare. (evaluate_subexp_standard): Use get_user_print_options. * cp-valprint.c (vtblprint, objectprint, static_field_print): Remove. (cp_print_value_fields): Remove format, pretty arguments; add options. Update. (cp_print_value): Likewise. (cp_print_static_field): Likewise. (_initialize_cp_valprint): Use user_print_options. Update. * c-valprint.c (print_function_pointer_address): Add addressprint argument. (c_val_print): Remove format, deref_ref, pretty arguments; add options. Update. (c_value_print): Add options argument. Update. * c-lang.h (c_val_print, c_value_print, c_printstr): Update. (vtblprint, static_field_print): Don't declare. (cp_print_value_fields): Update. * c-lang.c (c_printstr): Add options argument. Update. * breakpoint.c: Include valprint.h. (addressprint): Don't declare. (watchpoint_value_print): Use get_user_print_options. (print_one_breakpoint_location): Likewise. (breakpoint_1, print_it_catch_fork, print_it_catch_vfork, mention, print_exception_catchpoint): Likewise. * auxv.c (fprint_target_auxv): Don't declare addressprint. Use get_user_print_options. * ada-valprint.c (struct ada_val_print_args): Remove format, deref_ref, and pretty; add options. (print_optional_low_bound): Add options argument. (val_print_packed_array_elements): Remove format and pretty arguments; add options. Update. (printstr): Add options argument. Update. (ada_printstr): Likewise. (ada_val_print): Remove format, deref_ref, pretty arguments; add options argument. Update. (ada_val_print_stub): Update. (ada_val_print_array): Remove format, deref_ref, pretty arguments; add options. Update. (ada_val_print_1): Likewise. (print_variant_part): Likewise. (ada_value_print): Remove format, pretty arguments; add options. Update. (print_record): Likewise. (print_field_values): Likewise. * ada-lang.h (ada_val_print, ada_value_print, ada_printstr): Update. * ada-lang.c (ada_print_array_index): Add options argument; remove format and pretty arguments. (print_one_exception): Use get_user_print_options. gdb/testsuite * gdb.base/exprs.exp (test_expr): Add enum formatting tests.
2008-10-29 01:19:58 +08:00
fprintf_filtered (file, "\n");
}
break;
}
++ents;
if (type == AT_NULL)
break;
}
xfree (data);
return ents;
}
static void
info_auxv_command (char *cmd, int from_tty)
{
if (! target_has_stack)
error (_("The program has no auxiliary information now."));
else
{
int ents = fprint_target_auxv (gdb_stdout, &current_target);
if (ents < 0)
error (_("No auxiliary vector found, or failed reading it."));
else if (ents == 0)
error (_("Auxiliary vector is empty."));
}
}
extern initialize_file_ftype _initialize_auxv; /* -Wmissing-prototypes; */
void
_initialize_auxv (void)
{
add_info ("auxv", info_auxv_command,
_("Display the inferior's auxiliary vector.\n\
This is information provided by the operating system at program startup."));
}