binutils-gdb/gdb/trad-frame.c

245 lines
7.2 KiB
C
Raw Normal View History

/* Traditional frame unwind support, for GDB the GNU Debugger.
Copyright (C) 2003-2024 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "extract-store-integer.h"
#include "frame.h"
#include "trad-frame.h"
#include "regcache.h"
#include "frame-unwind.h"
Add a helper function to trad_frame to support register cache maps. Currently, signal frame handlers require explicitly coded calls to trad_frame_set_reg_addr() to describe the location of saved registers within a signal frame. This change permits the regcache_map_entry arrays used with regcache::supply_regset and regcache::collect_regset to be used to describe a block of saved registers given an initial address for the register block. Some systems use the same layout for registers in core dump notes, native register sets with ptrace(), and the register contexts saved in signal frames. On these systems, a single register map can now be used to describe the layout of registers in all three places. If a register map entry's size does not match the native size of a register, try to match the semantics used by regcache::transfer_regset. If a register slot is too large, assume that the register's value is stored in the first N bytes and ignore the remaning bytes. If the register slot is smaller than the register, assume the slot holds the low N bytes of the register's value. Read these low N bytes from the target and zero-extend them to generate a register value. While here, document the semantics for both regcache::transfer_regset and trad_frame with respect to register slot's whose size does not match the register's size. gdb/ChangeLog: * regcache.h (struct regcache_map_entry): Note that this type can be used with traditional frame caches. * trad-frame.c (trad_frame_set_reg_regmap): New. * trad-frame.h (trad_frame_set_reg_regmap): New.
2018-10-09 05:47:33 +08:00
#include "target.h"
#include "value.h"
Don't include gdbarch.h from defs.h I touched symtab.h and was surprised to see how many files were rebuilt. I looked into it a bit, and found that defs.h includes gdbarch.h, which in turn includes many things. gdbarch.h is only needed by a minority ofthe files in gdb, so this patch removes the include from defs.h and updates the fallout. I did "wc -l" on the files in build/gdb/.deps; this patch reduces the line count from 139935 to 137030; so there are definitely future build-time savings here. Note that while I configured with --enable-targets=all, it's possible that some *-nat.c file needs an update. I could not test all of these. The buildbot caught a few problems along these lines. gdb/ChangeLog 2019-07-10 Tom Tromey <tom@tromey.com> * defs.h: Don't include gdbarch.h. * aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h, alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h, ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c, cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h, cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c, compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c, cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c, dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c, dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c, dwarf2expr.c, expression.h, f-lang.c, frame-base.c, frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h, go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c, i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c, linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c, mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c, objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c, parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c, record-btrace.c, record.h, regcache-dump.c, regcache.h, riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y, sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c, sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c, sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h, target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c, tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c, utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c, xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update. * s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
2019-06-10 05:21:02 +08:00
#include "gdbarch.h"
#include "gdbsupport/traits.h"
struct trad_frame_cache
{
frame_info_ptr this_frame;
CORE_ADDR this_base;
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
trad_frame_saved_reg *prev_regs;
struct frame_id this_id;
};
struct trad_frame_cache *
gdb: pass frames as `const frame_info_ptr &` We currently pass frames to function by value, as `frame_info_ptr`. This is somewhat expensive: - the size of `frame_info_ptr` is 64 bytes, which is a bit big to pass by value - the constructors and destructor link/unlink the object in the global `frame_info_ptr::frame_list` list. This is an `intrusive_list`, so it's not so bad: it's just assigning a few points, there's no memory allocation as if it was `std::list`, but still it's useless to do that over and over. As suggested by Tom Tromey, change many function signatures to accept `const frame_info_ptr &` instead of `frame_info_ptr`. Some functions reassign their `frame_info_ptr` parameter, like: void the_func (frame_info_ptr frame) { for (; frame != nullptr; frame = get_prev_frame (frame)) { ... } } I wondered what to do about them, do I leave them as-is or change them (and need to introduce a separate local variable that can be re-assigned). I opted for the later for consistency. It might not be clear why some functions take `const frame_info_ptr &` while others take `frame_info_ptr`. Also, if a function took a `frame_info_ptr` because it did re-assign its parameter, I doubt that we would think to change it to `const frame_info_ptr &` should the implementation change such that it doesn't need to take `frame_info_ptr` anymore. It seems better to have a simple rule and apply it everywhere. Change-Id: I59d10addef687d157f82ccf4d54f5dde9a963fd0 Approved-By: Andrew Burgess <aburgess@redhat.com>
2024-02-20 02:07:47 +08:00
trad_frame_cache_zalloc (const frame_info_ptr &this_frame)
{
struct trad_frame_cache *this_trad_cache;
this_trad_cache = FRAME_OBSTACK_ZALLOC (struct trad_frame_cache);
this_trad_cache->prev_regs = trad_frame_alloc_saved_regs (this_frame);
this_trad_cache->this_frame = this_frame;
return this_trad_cache;
}
/* See trad-frame.h. */
void
trad_frame_reset_saved_regs (struct gdbarch *gdbarch,
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
trad_frame_saved_reg *regs)
{
int numregs = gdbarch_num_cooked_regs (gdbarch);
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
for (int regnum = 0; regnum < numregs; regnum++)
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
regs[regnum].set_realreg (regnum);
}
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
trad_frame_saved_reg *
Add unit test to aarch64 prologue analyzer We don't have an effective way to test prologue analyzer which is highly dependent on instruction patterns in prologue generated by compiler. GDB prologue analyzer may not handle the new sequences generated by new compiler, or may still handle some sequences that generated by very old compilers which are no longer used. The former is a functionality issue, while the latter is a maintenance issue. The input and output of prologue analyzer is quite clear, so it fits for unit test. The input is series of instructions, and the output are 1) where prologue end, 2) where registers are saved. In aarch64, they are represented in 'struct aarch64_prologue_cache'. This patch refactors aarch64_analyze_prologue so it can read instructions from either real target or test harness. In unit test aarch64_analyze_prologue_test, aarch64_analyze_prologue gets instructions we prepared in the test, as the input of prologue analyzer. Then, we checked various fields in 'struct aarch64_prologue_cache'. gdb: 2016-12-02 Yao Qi <yao.qi@linaro.org> Pedro Alves <palves@redhat.com> * aarch64-tdep.c: Include "selftest.h". (abstract_instruction_reader): New class. (instruction_reader): New class. (aarch64_analyze_prologue): Add new parameter reader. Call reader.read instead of read_memory_unsigned_integer. [GDB_SELF_TEST] (instruction_reader_test): New class. (aarch64_analyze_prologue_test): New function. (_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register selftests::aarch64_analyze_prologue_test. * trad-frame.c (trad_frame_cache_zalloc): (trad_frame_alloc_saved_regs): Add a new function. * trad-frame.h (trad_frame_alloc_saved_regs): Declare.
2016-12-02 17:37:30 +08:00
trad_frame_alloc_saved_regs (struct gdbarch *gdbarch)
{
static_assert (std::is_trivially_constructible<trad_frame_saved_reg>::value);
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
Introduce gdbarch_num_cooked_regs The expression gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch) is used quite often to find the number of cooked registers (raw + pseudo registers). This patch introduces gdbarch_num_cooked_regs, which does the equivalent. It substantially reduces required wrapping in some places, so should improve readability. There is a for loop in m68hc11_frame_unwind_cache that had iterated until (the equivalent of) gdbarch_num_cooked_regs (gdbarch) - 1. During review, we concluded that this is most likely an off-by-one mistake, so I replaced it with gdbarch_num_cooked_regs (gdbarch). gdb/ChangeLog: * gdbarch.sh (gdbarch_num_cooked_regs): New. * gdbarch.h: Re-generate. * ax-gdb.c (gen_expr): Use gdbarch_num_cooked_regs. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * findvar.c (value_of_register): Likewise. (value_of_register_lazy): Likewise. (address_from_register): Likewise. * frame.c (get_frame_register_bytes): Likewise. * gdbarch-selftests.c (register_to_value_test): Likewise. * h8300-tdep.c (h8300_register_type): Likewise. * i386-tdep.c (i386_dbx_reg_to_regnum): Likewise. (i386_svr4_reg_to_regnum): Likewise. * infcmd.c (default_print_registers_info): Likewise. (registers_info): Likewise. (print_vector_info): Likewise. (default_print_float_info): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mdebugread.c (mdebug_reg_to_regnum): Likewise. * mi/mi-main.c (mi_cmd_data_list_register_names): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_list_register_values): Likewise. (mi_cmd_data_write_register_values): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mips-tdep.c (print_gp_register_row): Likewise. (mips_print_registers_info): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * regcache.c (init_regcache_descr): Likewise. (register_size): Likewise. (register_dump::dump): Likewise. (cooked_read_test): Likewise. (cooked_write_test): Likewise. * rs6000-tdep.c (rs6000_register_sim_regno): Likewise. (rs6000_gdbarch_init): Likewise. * stabsread.c (stab_reg_to_regnum): Likewise. * stack.c (info_frame_command): Likewise. * target-descriptions.c (tdesc_register_name): Likewise. * trad-frame.c (trad_frame_alloc_saved_regs): Likewise. * tui/tui-regs.c (tui_show_register_group): Likewise. * user-regs.c (user_reg_map_name_to_regnum): Likewise. (user_reg_map_regnum_to_name): Likewise. (value_of_user_reg): Likewise. (maintenance_print_user_registers): Likewise. * xtensa-tdep.c (xtensa_find_register_by_name): Likewise. (xtensa_register_name): Likewise. (xtensa_register_type): Likewise. (xtensa_reg_to_regnum): Likewise. (xtensa_pseudo_register_read): Likewise. (xtensa_pseudo_register_write): Likewise.
2018-10-22 10:29:21 +08:00
int numregs = gdbarch_num_cooked_regs (gdbarch);
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
trad_frame_saved_reg *this_saved_regs
= FRAME_OBSTACK_CALLOC (numregs, trad_frame_saved_reg);
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
/* For backwards compatibility, initialize all the register values to
REALREG, with register 0 stored in 0, register 1 stored in 1 and so
on. */
trad_frame_reset_saved_regs (gdbarch, this_saved_regs);
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
return this_saved_regs;
}
Add unit test to aarch64 prologue analyzer We don't have an effective way to test prologue analyzer which is highly dependent on instruction patterns in prologue generated by compiler. GDB prologue analyzer may not handle the new sequences generated by new compiler, or may still handle some sequences that generated by very old compilers which are no longer used. The former is a functionality issue, while the latter is a maintenance issue. The input and output of prologue analyzer is quite clear, so it fits for unit test. The input is series of instructions, and the output are 1) where prologue end, 2) where registers are saved. In aarch64, they are represented in 'struct aarch64_prologue_cache'. This patch refactors aarch64_analyze_prologue so it can read instructions from either real target or test harness. In unit test aarch64_analyze_prologue_test, aarch64_analyze_prologue gets instructions we prepared in the test, as the input of prologue analyzer. Then, we checked various fields in 'struct aarch64_prologue_cache'. gdb: 2016-12-02 Yao Qi <yao.qi@linaro.org> Pedro Alves <palves@redhat.com> * aarch64-tdep.c: Include "selftest.h". (abstract_instruction_reader): New class. (instruction_reader): New class. (aarch64_analyze_prologue): Add new parameter reader. Call reader.read instead of read_memory_unsigned_integer. [GDB_SELF_TEST] (instruction_reader_test): New class. (aarch64_analyze_prologue_test): New function. (_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register selftests::aarch64_analyze_prologue_test. * trad-frame.c (trad_frame_cache_zalloc): (trad_frame_alloc_saved_regs): Add a new function. * trad-frame.h (trad_frame_alloc_saved_regs): Declare.
2016-12-02 17:37:30 +08:00
/* A traditional frame is unwound by analysing the function prologue
and using the information gathered to track registers. For
non-optimized frames, the technique is reliable (just need to check
for all potential instruction sequences). */
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
trad_frame_saved_reg *
gdb: pass frames as `const frame_info_ptr &` We currently pass frames to function by value, as `frame_info_ptr`. This is somewhat expensive: - the size of `frame_info_ptr` is 64 bytes, which is a bit big to pass by value - the constructors and destructor link/unlink the object in the global `frame_info_ptr::frame_list` list. This is an `intrusive_list`, so it's not so bad: it's just assigning a few points, there's no memory allocation as if it was `std::list`, but still it's useless to do that over and over. As suggested by Tom Tromey, change many function signatures to accept `const frame_info_ptr &` instead of `frame_info_ptr`. Some functions reassign their `frame_info_ptr` parameter, like: void the_func (frame_info_ptr frame) { for (; frame != nullptr; frame = get_prev_frame (frame)) { ... } } I wondered what to do about them, do I leave them as-is or change them (and need to introduce a separate local variable that can be re-assigned). I opted for the later for consistency. It might not be clear why some functions take `const frame_info_ptr &` while others take `frame_info_ptr`. Also, if a function took a `frame_info_ptr` because it did re-assign its parameter, I doubt that we would think to change it to `const frame_info_ptr &` should the implementation change such that it doesn't need to take `frame_info_ptr` anymore. It seems better to have a simple rule and apply it everywhere. Change-Id: I59d10addef687d157f82ccf4d54f5dde9a963fd0 Approved-By: Andrew Burgess <aburgess@redhat.com>
2024-02-20 02:07:47 +08:00
trad_frame_alloc_saved_regs (const frame_info_ptr &this_frame)
Add unit test to aarch64 prologue analyzer We don't have an effective way to test prologue analyzer which is highly dependent on instruction patterns in prologue generated by compiler. GDB prologue analyzer may not handle the new sequences generated by new compiler, or may still handle some sequences that generated by very old compilers which are no longer used. The former is a functionality issue, while the latter is a maintenance issue. The input and output of prologue analyzer is quite clear, so it fits for unit test. The input is series of instructions, and the output are 1) where prologue end, 2) where registers are saved. In aarch64, they are represented in 'struct aarch64_prologue_cache'. This patch refactors aarch64_analyze_prologue so it can read instructions from either real target or test harness. In unit test aarch64_analyze_prologue_test, aarch64_analyze_prologue gets instructions we prepared in the test, as the input of prologue analyzer. Then, we checked various fields in 'struct aarch64_prologue_cache'. gdb: 2016-12-02 Yao Qi <yao.qi@linaro.org> Pedro Alves <palves@redhat.com> * aarch64-tdep.c: Include "selftest.h". (abstract_instruction_reader): New class. (instruction_reader): New class. (aarch64_analyze_prologue): Add new parameter reader. Call reader.read instead of read_memory_unsigned_integer. [GDB_SELF_TEST] (instruction_reader_test): New class. (aarch64_analyze_prologue_test): New function. (_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register selftests::aarch64_analyze_prologue_test. * trad-frame.c (trad_frame_cache_zalloc): (trad_frame_alloc_saved_regs): Add a new function. * trad-frame.h (trad_frame_alloc_saved_regs): Declare.
2016-12-02 17:37:30 +08:00
{
struct gdbarch *gdbarch = get_frame_arch (this_frame);
return trad_frame_alloc_saved_regs (gdbarch);
}
void
trad_frame_set_reg_value (struct trad_frame_cache *this_trad_cache,
int regnum, LONGEST val)
{
/* External interface for users of trad_frame_cache
(who cannot access the prev_regs object directly). */
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
this_trad_cache->prev_regs[regnum].set_value (val);
}
void
trad_frame_set_reg_realreg (struct trad_frame_cache *this_trad_cache,
int regnum, int realreg)
{
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
this_trad_cache->prev_regs[regnum].set_realreg (realreg);
}
void
trad_frame_set_reg_addr (struct trad_frame_cache *this_trad_cache,
int regnum, CORE_ADDR addr)
{
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
this_trad_cache->prev_regs[regnum].set_addr (addr);
}
Add a helper function to trad_frame to support register cache maps. Currently, signal frame handlers require explicitly coded calls to trad_frame_set_reg_addr() to describe the location of saved registers within a signal frame. This change permits the regcache_map_entry arrays used with regcache::supply_regset and regcache::collect_regset to be used to describe a block of saved registers given an initial address for the register block. Some systems use the same layout for registers in core dump notes, native register sets with ptrace(), and the register contexts saved in signal frames. On these systems, a single register map can now be used to describe the layout of registers in all three places. If a register map entry's size does not match the native size of a register, try to match the semantics used by regcache::transfer_regset. If a register slot is too large, assume that the register's value is stored in the first N bytes and ignore the remaning bytes. If the register slot is smaller than the register, assume the slot holds the low N bytes of the register's value. Read these low N bytes from the target and zero-extend them to generate a register value. While here, document the semantics for both regcache::transfer_regset and trad_frame with respect to register slot's whose size does not match the register's size. gdb/ChangeLog: * regcache.h (struct regcache_map_entry): Note that this type can be used with traditional frame caches. * trad-frame.c (trad_frame_set_reg_regmap): New. * trad-frame.h (trad_frame_set_reg_regmap): New.
2018-10-09 05:47:33 +08:00
void
trad_frame_set_reg_regmap (struct trad_frame_cache *this_trad_cache,
const struct regcache_map_entry *regmap,
CORE_ADDR addr, size_t size)
{
struct gdbarch *gdbarch = get_frame_arch (this_trad_cache->this_frame);
int offs = 0, count;
for (; (count = regmap->count) != 0; regmap++)
{
int regno = regmap->regno;
int slot_size = regmap->size;
if (slot_size == 0 && regno != REGCACHE_MAP_SKIP)
slot_size = register_size (gdbarch, regno);
if (offs + slot_size > size)
break;
if (regno == REGCACHE_MAP_SKIP)
offs += count * slot_size;
else
for (; count--; regno++, offs += slot_size)
{
/* Mimic the semantics of regcache::transfer_regset if a
register slot's size does not match the size of a
register.
If a register slot is larger than a register, assume
the register's value is stored in the first N bytes of
the slot and ignore the remaining bytes.
If the register slot is smaller than the register,
assume that the slot contains the low N bytes of the
register's value. Since trad_frame assumes that
registers stored by address are sized according to the
register, read the low N bytes and zero-extend them to
generate a register value. */
if (slot_size >= register_size (gdbarch, regno))
trad_frame_set_reg_addr (this_trad_cache, regno, addr + offs);
else
{
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
gdb::byte_vector buf (slot_size);
Add a helper function to trad_frame to support register cache maps. Currently, signal frame handlers require explicitly coded calls to trad_frame_set_reg_addr() to describe the location of saved registers within a signal frame. This change permits the regcache_map_entry arrays used with regcache::supply_regset and regcache::collect_regset to be used to describe a block of saved registers given an initial address for the register block. Some systems use the same layout for registers in core dump notes, native register sets with ptrace(), and the register contexts saved in signal frames. On these systems, a single register map can now be used to describe the layout of registers in all three places. If a register map entry's size does not match the native size of a register, try to match the semantics used by regcache::transfer_regset. If a register slot is too large, assume that the register's value is stored in the first N bytes and ignore the remaning bytes. If the register slot is smaller than the register, assume the slot holds the low N bytes of the register's value. Read these low N bytes from the target and zero-extend them to generate a register value. While here, document the semantics for both regcache::transfer_regset and trad_frame with respect to register slot's whose size does not match the register's size. gdb/ChangeLog: * regcache.h (struct regcache_map_entry): Note that this type can be used with traditional frame caches. * trad-frame.c (trad_frame_set_reg_regmap): New. * trad-frame.h (trad_frame_set_reg_regmap): New.
2018-10-09 05:47:33 +08:00
if (target_read_memory (addr + offs, buf.data (), buf.size ())
== 0)
Add a helper function to trad_frame to support register cache maps. Currently, signal frame handlers require explicitly coded calls to trad_frame_set_reg_addr() to describe the location of saved registers within a signal frame. This change permits the regcache_map_entry arrays used with regcache::supply_regset and regcache::collect_regset to be used to describe a block of saved registers given an initial address for the register block. Some systems use the same layout for registers in core dump notes, native register sets with ptrace(), and the register contexts saved in signal frames. On these systems, a single register map can now be used to describe the layout of registers in all three places. If a register map entry's size does not match the native size of a register, try to match the semantics used by regcache::transfer_regset. If a register slot is too large, assume that the register's value is stored in the first N bytes and ignore the remaning bytes. If the register slot is smaller than the register, assume the slot holds the low N bytes of the register's value. Read these low N bytes from the target and zero-extend them to generate a register value. While here, document the semantics for both regcache::transfer_regset and trad_frame with respect to register slot's whose size does not match the register's size. gdb/ChangeLog: * regcache.h (struct regcache_map_entry): Note that this type can be used with traditional frame caches. * trad-frame.c (trad_frame_set_reg_regmap): New. * trad-frame.h (trad_frame_set_reg_regmap): New.
2018-10-09 05:47:33 +08:00
{
LONGEST val
= extract_unsigned_integer (buf.data (), buf.size (),
byte_order);
Add a helper function to trad_frame to support register cache maps. Currently, signal frame handlers require explicitly coded calls to trad_frame_set_reg_addr() to describe the location of saved registers within a signal frame. This change permits the regcache_map_entry arrays used with regcache::supply_regset and regcache::collect_regset to be used to describe a block of saved registers given an initial address for the register block. Some systems use the same layout for registers in core dump notes, native register sets with ptrace(), and the register contexts saved in signal frames. On these systems, a single register map can now be used to describe the layout of registers in all three places. If a register map entry's size does not match the native size of a register, try to match the semantics used by regcache::transfer_regset. If a register slot is too large, assume that the register's value is stored in the first N bytes and ignore the remaning bytes. If the register slot is smaller than the register, assume the slot holds the low N bytes of the register's value. Read these low N bytes from the target and zero-extend them to generate a register value. While here, document the semantics for both regcache::transfer_regset and trad_frame with respect to register slot's whose size does not match the register's size. gdb/ChangeLog: * regcache.h (struct regcache_map_entry): Note that this type can be used with traditional frame caches. * trad-frame.c (trad_frame_set_reg_regmap): New. * trad-frame.h (trad_frame_set_reg_regmap): New.
2018-10-09 05:47:33 +08:00
trad_frame_set_reg_value (this_trad_cache, regno, val);
}
}
}
}
}
[AArch64] SVE/FPSIMD fixup for big endian The FPSIMD dump in signal frames and ptrace FPSIMD dump in the SVE context structure follows the target endianness, whereas the SVE dumps are endianness-independent (LE). Therefore, when the system is in BE mode, we need to reverse the bytes for the FPSIMD data. Given the V registers are larger than 64-bit, I've added a way for value bytes to be set, as opposed to passing a 64-bit fixed quantity. This fits nicely with the unwinding *_got_bytes function and makes the trad-frame more flexible and capable of saving larger registers. The memory for the bytes is allocated via the frame obstack, so it gets freed after we're done inspecting the frame. gdb/ChangeLog: 2020-12-10 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_restore_vreg) New function. (aarch64_linux_sigframe_init): Call aarch64_linux_restore_vreg. * aarch64-tdep.h (V_REGISTER_SIZE): Move to ... * arch/aarch64.h: ... here. * nat/aarch64-sve-linux-ptrace.c: Include endian.h. (aarch64_maybe_swab128): New function. (aarch64_sve_regs_copy_to_reg_buf) (aarch64_sve_regs_copy_from_reg_buf): Adjust FPSIMD entries. * trad-frame.c (trad_frame_reset_saved_regs): Initialize the data field. (TF_REG_VALUE_BYTES): New enum value. (trad_frame_value_bytes_p): New function. (trad_frame_set_value_bytes): New function. (trad_frame_set_reg_value_bytes): New function. (trad_frame_get_prev_register): Handle register values saved as bytes. * trad-frame.h (trad_frame_set_reg_value_bytes): New prototype. (struct trad_frame_saved_reg) <data>: New field. (trad_frame_set_value_bytes): New prototype. (trad_frame_value_bytes_p): New prototype.
2020-03-19 00:06:05 +08:00
/* See trad-frame.h. */
void
trad_frame_set_reg_value_bytes (struct trad_frame_cache *this_trad_cache,
int regnum,
gdb::array_view<const gdb_byte> bytes)
[AArch64] SVE/FPSIMD fixup for big endian The FPSIMD dump in signal frames and ptrace FPSIMD dump in the SVE context structure follows the target endianness, whereas the SVE dumps are endianness-independent (LE). Therefore, when the system is in BE mode, we need to reverse the bytes for the FPSIMD data. Given the V registers are larger than 64-bit, I've added a way for value bytes to be set, as opposed to passing a 64-bit fixed quantity. This fits nicely with the unwinding *_got_bytes function and makes the trad-frame more flexible and capable of saving larger registers. The memory for the bytes is allocated via the frame obstack, so it gets freed after we're done inspecting the frame. gdb/ChangeLog: 2020-12-10 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_restore_vreg) New function. (aarch64_linux_sigframe_init): Call aarch64_linux_restore_vreg. * aarch64-tdep.h (V_REGISTER_SIZE): Move to ... * arch/aarch64.h: ... here. * nat/aarch64-sve-linux-ptrace.c: Include endian.h. (aarch64_maybe_swab128): New function. (aarch64_sve_regs_copy_to_reg_buf) (aarch64_sve_regs_copy_from_reg_buf): Adjust FPSIMD entries. * trad-frame.c (trad_frame_reset_saved_regs): Initialize the data field. (TF_REG_VALUE_BYTES): New enum value. (trad_frame_value_bytes_p): New function. (trad_frame_set_value_bytes): New function. (trad_frame_set_reg_value_bytes): New function. (trad_frame_get_prev_register): Handle register values saved as bytes. * trad-frame.h (trad_frame_set_reg_value_bytes): New prototype. (struct trad_frame_saved_reg) <data>: New field. (trad_frame_set_value_bytes): New prototype. (trad_frame_value_bytes_p): New prototype.
2020-03-19 00:06:05 +08:00
{
/* External interface for users of trad_frame_cache
(who cannot access the prev_regs object directly). */
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
this_trad_cache->prev_regs[regnum].set_value_bytes (bytes);
[AArch64] SVE/FPSIMD fixup for big endian The FPSIMD dump in signal frames and ptrace FPSIMD dump in the SVE context structure follows the target endianness, whereas the SVE dumps are endianness-independent (LE). Therefore, when the system is in BE mode, we need to reverse the bytes for the FPSIMD data. Given the V registers are larger than 64-bit, I've added a way for value bytes to be set, as opposed to passing a 64-bit fixed quantity. This fits nicely with the unwinding *_got_bytes function and makes the trad-frame more flexible and capable of saving larger registers. The memory for the bytes is allocated via the frame obstack, so it gets freed after we're done inspecting the frame. gdb/ChangeLog: 2020-12-10 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_restore_vreg) New function. (aarch64_linux_sigframe_init): Call aarch64_linux_restore_vreg. * aarch64-tdep.h (V_REGISTER_SIZE): Move to ... * arch/aarch64.h: ... here. * nat/aarch64-sve-linux-ptrace.c: Include endian.h. (aarch64_maybe_swab128): New function. (aarch64_sve_regs_copy_to_reg_buf) (aarch64_sve_regs_copy_from_reg_buf): Adjust FPSIMD entries. * trad-frame.c (trad_frame_reset_saved_regs): Initialize the data field. (TF_REG_VALUE_BYTES): New enum value. (trad_frame_value_bytes_p): New function. (trad_frame_set_value_bytes): New function. (trad_frame_set_reg_value_bytes): New function. (trad_frame_get_prev_register): Handle register values saved as bytes. * trad-frame.h (trad_frame_set_reg_value_bytes): New prototype. (struct trad_frame_saved_reg) <data>: New field. (trad_frame_set_value_bytes): New prototype. (trad_frame_value_bytes_p): New prototype.
2020-03-19 00:06:05 +08:00
}
struct value *
gdb: pass frames as `const frame_info_ptr &` We currently pass frames to function by value, as `frame_info_ptr`. This is somewhat expensive: - the size of `frame_info_ptr` is 64 bytes, which is a bit big to pass by value - the constructors and destructor link/unlink the object in the global `frame_info_ptr::frame_list` list. This is an `intrusive_list`, so it's not so bad: it's just assigning a few points, there's no memory allocation as if it was `std::list`, but still it's useless to do that over and over. As suggested by Tom Tromey, change many function signatures to accept `const frame_info_ptr &` instead of `frame_info_ptr`. Some functions reassign their `frame_info_ptr` parameter, like: void the_func (frame_info_ptr frame) { for (; frame != nullptr; frame = get_prev_frame (frame)) { ... } } I wondered what to do about them, do I leave them as-is or change them (and need to introduce a separate local variable that can be re-assigned). I opted for the later for consistency. It might not be clear why some functions take `const frame_info_ptr &` while others take `frame_info_ptr`. Also, if a function took a `frame_info_ptr` because it did re-assign its parameter, I doubt that we would think to change it to `const frame_info_ptr &` should the implementation change such that it doesn't need to take `frame_info_ptr` anymore. It seems better to have a simple rule and apply it everywhere. Change-Id: I59d10addef687d157f82ccf4d54f5dde9a963fd0 Approved-By: Andrew Burgess <aburgess@redhat.com>
2024-02-20 02:07:47 +08:00
trad_frame_get_prev_register (const frame_info_ptr &this_frame,
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
trad_frame_saved_reg this_saved_regs[],
int regnum)
{
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
if (this_saved_regs[regnum].is_addr ())
/* The register was saved in memory. */
return frame_unwind_got_memory (this_frame, regnum,
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
this_saved_regs[regnum].addr ());
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
else if (this_saved_regs[regnum].is_realreg ())
return frame_unwind_got_register (this_frame, regnum,
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
this_saved_regs[regnum].realreg ());
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
else if (this_saved_regs[regnum].is_value ())
/* The register's value is available. */
return frame_unwind_got_constant (this_frame, regnum,
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
this_saved_regs[regnum].value ());
trad-frame cleanups With the new member functions for struct trad_frame_saved_reg, there is no need to invoke some of the set/get functions anymore. This patch removes those and adjusts all callers. Even though the most natural initial state of a saved register value is UNKNOWN, there are target backends relying on the previous initial state of REALREG set to a register's own number. I noticed this in at least a couple targets: aarch64 and riscv. Because of that, I decided to keep the reset function that sets the set of register values to REALREG. I can't exercise all the targets to make sure the initial state change won't break things, hence why it is risky to change the default. Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04. gdb/ChangeLog 2021-01-19 Luis Machado <luis.machado@linaro.org> * trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate memory and save data. (trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes) (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p): Remove. (trad_frame_reset_saved_regs): Adjust documentation. * trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a constructor and reset the state of the registers. (trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p) (trad_frame_value_bytes_p, trad_frame_set_value) (trad_frame_set_realreg, trad_frame_set_addr) (trad_frame_set_unknown, trad_frame_set_value_bytes): Remove. (trad_frame_set_reg_realreg): Update to call member function. (trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * aarch64-tdep.c (aarch64_analyze_prologue) (aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1) (aarch64_prologue_prev_register): Update to use member functions. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise. * arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise. * arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache) (arm_make_epilogue_frame_cache): Likewise. * avr-tdep.c (avr_frame_unwind_cache) (avr_frame_prev_register): Likewise. * cris-tdep.c (cris_scan_prologue): Likewise. * csky-tdep.c (csky_frame_unwind_cache): Likewise. * frv-tdep.c (frv_analyze_prologue): Likewise. * hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mips-tdep.c (set_reg_offset, mips_insn16_frame_cache) (mips_micro_frame_cache, mips_insn32_frame_cache): Likewise. (reset_saved_regs): Adjust to set realreg. * riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to call member functions. * rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache) * s390-tdep.c (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache): Likewise. * score-tdep.c (score7_analyze_prologue) (score3_analyze_prologue, score_make_prologue_cache): Likewise. * sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue) (tilegx_frame_cache): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * vax-tdep.c (vax_frame_cache): Likewise.
2021-01-15 02:43:28 +08:00
else if (this_saved_regs[regnum].is_value_bytes ())
[AArch64] SVE/FPSIMD fixup for big endian The FPSIMD dump in signal frames and ptrace FPSIMD dump in the SVE context structure follows the target endianness, whereas the SVE dumps are endianness-independent (LE). Therefore, when the system is in BE mode, we need to reverse the bytes for the FPSIMD data. Given the V registers are larger than 64-bit, I've added a way for value bytes to be set, as opposed to passing a 64-bit fixed quantity. This fits nicely with the unwinding *_got_bytes function and makes the trad-frame more flexible and capable of saving larger registers. The memory for the bytes is allocated via the frame obstack, so it gets freed after we're done inspecting the frame. gdb/ChangeLog: 2020-12-10 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_restore_vreg) New function. (aarch64_linux_sigframe_init): Call aarch64_linux_restore_vreg. * aarch64-tdep.h (V_REGISTER_SIZE): Move to ... * arch/aarch64.h: ... here. * nat/aarch64-sve-linux-ptrace.c: Include endian.h. (aarch64_maybe_swab128): New function. (aarch64_sve_regs_copy_to_reg_buf) (aarch64_sve_regs_copy_from_reg_buf): Adjust FPSIMD entries. * trad-frame.c (trad_frame_reset_saved_regs): Initialize the data field. (TF_REG_VALUE_BYTES): New enum value. (trad_frame_value_bytes_p): New function. (trad_frame_set_value_bytes): New function. (trad_frame_set_reg_value_bytes): New function. (trad_frame_get_prev_register): Handle register values saved as bytes. * trad-frame.h (trad_frame_set_reg_value_bytes): New prototype. (struct trad_frame_saved_reg) <data>: New field. (trad_frame_set_value_bytes): New prototype. (trad_frame_value_bytes_p): New prototype.
2020-03-19 00:06:05 +08:00
/* The register's value is available as a sequence of bytes. */
return frame_unwind_got_bytes (this_frame, regnum,
Refactor struct trad_frame_saved_regs The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2020-12-23 04:45:21 +08:00
this_saved_regs[regnum].value_bytes ());
else
return frame_unwind_got_optimized (this_frame, regnum);
}
struct value *
trad_frame_get_register (struct trad_frame_cache *this_trad_cache,
gdb: pass frames as `const frame_info_ptr &` We currently pass frames to function by value, as `frame_info_ptr`. This is somewhat expensive: - the size of `frame_info_ptr` is 64 bytes, which is a bit big to pass by value - the constructors and destructor link/unlink the object in the global `frame_info_ptr::frame_list` list. This is an `intrusive_list`, so it's not so bad: it's just assigning a few points, there's no memory allocation as if it was `std::list`, but still it's useless to do that over and over. As suggested by Tom Tromey, change many function signatures to accept `const frame_info_ptr &` instead of `frame_info_ptr`. Some functions reassign their `frame_info_ptr` parameter, like: void the_func (frame_info_ptr frame) { for (; frame != nullptr; frame = get_prev_frame (frame)) { ... } } I wondered what to do about them, do I leave them as-is or change them (and need to introduce a separate local variable that can be re-assigned). I opted for the later for consistency. It might not be clear why some functions take `const frame_info_ptr &` while others take `frame_info_ptr`. Also, if a function took a `frame_info_ptr` because it did re-assign its parameter, I doubt that we would think to change it to `const frame_info_ptr &` should the implementation change such that it doesn't need to take `frame_info_ptr` anymore. It seems better to have a simple rule and apply it everywhere. Change-Id: I59d10addef687d157f82ccf4d54f5dde9a963fd0 Approved-By: Andrew Burgess <aburgess@redhat.com>
2024-02-20 02:07:47 +08:00
const frame_info_ptr &this_frame,
int regnum)
{
return trad_frame_get_prev_register (this_frame, this_trad_cache->prev_regs,
regnum);
}
void
trad_frame_set_id (struct trad_frame_cache *this_trad_cache,
struct frame_id this_id)
{
this_trad_cache->this_id = this_id;
}
void
trad_frame_get_id (struct trad_frame_cache *this_trad_cache,
struct frame_id *this_id)
{
(*this_id) = this_trad_cache->this_id;
}
void
trad_frame_set_this_base (struct trad_frame_cache *this_trad_cache,
CORE_ADDR this_base)
{
this_trad_cache->this_base = this_base;
}
CORE_ADDR
trad_frame_get_this_base (struct trad_frame_cache *this_trad_cache)
{
return this_trad_cache->this_base;
}