binutils-gdb/gdb/gdbarch.c

5506 lines
190 KiB
C
Raw Normal View History

gdb/ * copying.awk: Print buffer-read-only and vi ro markers. * copying.c: Rebuild. * gdbarch.sh (copyright): Print buffer-read-only and vi ro markers. * gdbarch.c, gdbarch.h: Rebuild. * target-descriptions.c (maint_print_c_tdesc_cmd): Print buffer-read-only and vi ro markers. * features/arm-with-iwmmxt.c: Rebuild. * features/arm-with-m-fpa-layout.c: Rebuild. * features/arm-with-m-vfp-d16.c: Rebuild. * features/arm-with-m.c: Rebuild. * features/arm-with-neon.c: Rebuild. * features/arm-with-vfpv2.c: Rebuild. * features/arm-with-vfpv3.c: Rebuild. * features/i386/amd64-avx-linux.c: Rebuild. * features/i386/amd64-avx.c: Rebuild. * features/i386/amd64-linux.c: Rebuild. * features/i386/amd64.c: Rebuild. * features/i386/i386-avx-linux.c: Rebuild. * features/i386/i386-avx.c: Rebuild. * features/i386/i386-linux.c: Rebuild. * features/i386/i386-mmx-linux.c: Rebuild. * features/i386/i386-mmx.c: Rebuild. * features/i386/i386.c: Rebuild. * features/i386/x32-avx-linux.c: Rebuild. * features/i386/x32-avx.c: Rebuild. * features/i386/x32-linux.c: Rebuild. * features/i386/x32.c: Rebuild. * features/mips-dsp-linux.c: Rebuild. * features/mips-linux.c: Rebuild. * features/mips64-dsp-linux.c: Rebuild. * features/mips64-linux.c: Rebuild. * features/rs6000/powerpc-32.c: Rebuild. * features/rs6000/powerpc-32l.c: Rebuild. * features/rs6000/powerpc-403.c: Rebuild. * features/rs6000/powerpc-403gc.c: Rebuild. * features/rs6000/powerpc-405.c: Rebuild. * features/rs6000/powerpc-505.c: Rebuild. * features/rs6000/powerpc-601.c: Rebuild. * features/rs6000/powerpc-602.c: Rebuild. * features/rs6000/powerpc-603.c: Rebuild. * features/rs6000/powerpc-604.c: Rebuild. * features/rs6000/powerpc-64.c: Rebuild. * features/rs6000/powerpc-64l.c: Rebuild. * features/rs6000/powerpc-7400.c: Rebuild. * features/rs6000/powerpc-750.c: Rebuild. * features/rs6000/powerpc-860.c: Rebuild. * features/rs6000/powerpc-altivec32.c: Rebuild. * features/rs6000/powerpc-altivec32l.c: Rebuild. * features/rs6000/powerpc-altivec64.c: Rebuild. * features/rs6000/powerpc-altivec64l.c: Rebuild. * features/rs6000/powerpc-cell32l.c: Rebuild. * features/rs6000/powerpc-cell64l.c: Rebuild. * features/rs6000/powerpc-e500.c: Rebuild. * features/rs6000/powerpc-e500l.c: Rebuild. * features/rs6000/powerpc-isa205-32l.c: Rebuild. * features/rs6000/powerpc-isa205-64l.c: Rebuild. * features/rs6000/powerpc-isa205-altivec32l.c: Rebuild. * features/rs6000/powerpc-isa205-altivec64l.c: Rebuild. * features/rs6000/powerpc-isa205-vsx32l.c: Rebuild. * features/rs6000/powerpc-isa205-vsx64l.c: Rebuild. * features/rs6000/powerpc-vsx32.c: Rebuild. * features/rs6000/powerpc-vsx32l.c: Rebuild. * features/rs6000/powerpc-vsx64.c: Rebuild. * features/rs6000/powerpc-vsx64l.c: Rebuild. * features/rs6000/rs6000.c: Rebuild. * features/s390-linux32.c: Rebuild. * features/s390-linux32v1.c: Rebuild. * features/s390-linux32v2.c: Rebuild. * features/s390-linux64.c: Rebuild. * features/s390-linux64v1.c: Rebuild. * features/s390-linux64v2.c: Rebuild. * features/s390x-linux64.c: Rebuild. * features/s390x-linux64v1.c: Rebuild. * features/s390x-linux64v2.c: Rebuild. * features/tic6x-c62x-linux.c: Rebuild. * features/tic6x-c62x.c: Rebuild. * features/tic6x-c64x-linux.c: Rebuild. * features/tic6x-c64x.c: Rebuild. * features/tic6x-c64xp-linux.c: Rebuild. * features/tic6x-c64xp.c: Rebuild.
2012-07-28 04:23:05 +08:00
/* *INDENT-OFF* */ /* THIS FILE IS GENERATED -*- buffer-read-only: t -*- */
/* vi:set ro: */
2000-03-30 13:32:23 +08:00
1999-07-20 07:30:11 +08:00
/* Dynamic architecture support for GDB, the GNU debugger.
Copyright (C) 1998-2018 Free Software Foundation, Inc.
1999-08-10 05:36:23 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
1999-08-10 05:36:23 +08:00
(at your option) any later version.
1999-08-10 05:36:23 +08:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
1999-08-10 05:36:23 +08:00
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
1999-07-20 07:30:11 +08:00
1999-08-31 09:14:27 +08:00
/* This file was created with the aid of ``gdbarch.sh''.
The Bourne shell script ``gdbarch.sh'' creates the files
1999-08-31 09:14:27 +08:00
``new-gdbarch.c'' and ``new-gdbarch.h and then compares them
against the existing ``gdbarch.[hc]''. Any differences found
being reported.
If editing this file, please also run gdbarch.sh and merge any
changes into that script. Conversely, when making sweeping changes
1999-08-31 09:14:27 +08:00
to this file, modifying gdbarch.sh and using its output may prove
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
easier. */
#include "defs.h"
#include "arch-utils.h"
1999-06-15 02:08:47 +08:00
#include "gdbcmd.h"
#include "inferior.h"
1999-04-27 02:34:20 +08:00
#include "symcat.h"
#include "floatformat.h"
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
Convert observers to C++ This converts observers from using a special source-generating script to be plain C++. This version of the patch takes advantage of C++11 by using std::function and variadic templates; incorporates Pedro's patches; and renames the header file to "observable.h" (this change eliminates the need for a clean rebuild). Note that Pedro's patches used a template lambda in tui-hooks.c, but this failed to compile on some buildbot instances (presumably due to differing C++ versions); I replaced this with an ordinary template function. Regression tested on the buildbot. gdb/ChangeLog 2018-03-19 Pedro Alves <palves@redhat.com> Tom Tromey <tom@tromey.com> * unittests/observable-selftests.c: New file. * common/observable.h: New file. * observable.h: New file. * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c, arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c, breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c, corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c, extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c, infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c, linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c, mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c, ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c, python/py-breakpoint.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c, record-btrace.c, record-full.c, record.c, regcache.c, remote.c, riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c, spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c, symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c, tui/tui-interp.c, valops.c: Update all users. * tui/tui-hooks.c (tui_bp_created_observer) (tui_bp_deleted_observer, tui_bp_modified_observer) (tui_inferior_exit_observer, tui_before_prompt_observer) (tui_normal_stop_observer, tui_register_changed_observer): Remove. (tui_observers_token): New global. (attach_or_detach, tui_attach_detach_observers): New functions. (tui_install_hooks, tui_remove_hooks): Use tui_attach_detach_observers. * record-btrace.c (record_btrace_thread_observer): Remove. (record_btrace_thread_observer_token): New global. * observer.sh: Remove. * observer.c: Rename to observable.c. * observable.c (namespace gdb_observers): Define new objects. (observer_debug): Move into gdb_observers namespace. (struct observer, struct observer_list, xalloc_observer_list_node) (xfree_observer_list_node, generic_observer_attach) (generic_observer_detach, generic_observer_notify): Remove. (_initialize_observer): Update. Don't include observer.inc. * Makefile.in (generated_files): Remove observer.h, observer.inc. (clean mostlyclean): Likewise. (observer.h, observer.inc): Remove targets. (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c. (COMMON_SFILES): Use observable.c, not observer.c. * .gitignore: Remove observer.h. gdb/doc/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * observer.texi: Remove. gdb/testsuite/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * gdb.gdb/observer.exp: Remove.
2016-10-03 00:50:20 +08:00
#include "observable.h"
#include "regcache.h"
New "iterate_over_objfiles_in_search_order" gdbarch method. This patch introduces the "iterate_over_objfiles_in_search_order" gdbarch method, as well as its default implementation, and converts the areas where it will matter to using this gdbarch method. The default method implementation is the only one installed, and the changes should have no functional impact in terms of behavior. This only paves the way for the architectures that will need their own version. gdb/ChangeLog: * gdbarch.sh: Add generation of "iterate_over_objfiles_in_search_order_cb_ftype" typedef in gdbarch.h. Add include of "objfiles.h" in gdbarch.c. (iterate_over_objfiles_in_search_order): New gdbarch method. * gdbarch.h, gdbarch.c: Regenerate. * objfiles.h (default_iterate_over_objfiles_in_search_order): Add declaration. * objfiles.c (default_iterate_over_objfiles_in_search_order): New function. * symtab.c (lookup_symbol_aux_objfile): New function, extracted out of lookup_symbol_aux_symtabs. (lookup_symbol_aux_symtabs): Replace extracted-out code by call to lookup_symbol_aux_objfile. (struct global_sym_lookup_data): New type. (lookup_symbol_global_iterator_cb): New function. (lookup_symbol_global): Search for symbol using gdbarch_iterate_over_objfiles_in_search_order and lookup_symbol_global_iterator_cb. * findvar.c (struct minsym_lookup_data): New type. (minsym_lookup_iterator_cb): New function. (default_read_var_value) [case LOC_UNRESOLVED]: Resolve the symbol's address via gdbarch_iterate_over_objfiles_in_search_order and minsym_lookup_iterator_cb.
2012-06-05 21:50:50 +08:00
#include "objfiles.h"
#include "auxv.h"
1999-08-31 09:14:27 +08:00
/* Static function declarations */
static void alloc_gdbarch_data (struct gdbarch *);
1999-08-31 09:14:27 +08:00
1999-06-15 02:08:47 +08:00
/* Non-zero if we want to trace architecture code. */
#ifndef GDBARCH_DEBUG
#define GDBARCH_DEBUG 0
#endif
gdb/ * dwarf2loc.c (entry_values_debug): Add 'unsigned'. (_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * dwarf2loc.h: Update the declaration of 'entry_values_debug'. * dwarf2read.c (dwarf2_die_debug): Add 'unsigned'. (_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'. (_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.c (frame_debug): Add 'unsigned'. (_intialize_frame): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.h: Update the declaration of 'frame_debug'. * gdbtypes.c (overload_debug): Add 'unsigned'. (_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * inferior.h: Update declaration of 'debug_infrun'. * infrun.c (debug_infrun): Add 'unsigned'. (_initialize_infrun): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * jit.c (jit_debug): Add 'unsigned'. (_initialize_jit): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-nat.c (debug_linux_nat): Add 'unsigned'. (_initialize_linux_nat): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-thread-db.c (libthread_db_debug): Add 'unsigned'. (_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * machoread.c (mach_o_debug_level): Add 'unsigned'. (_initialize_machoread): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'. * microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'. (_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd intead of add_setshow_zinteger_cmd. * mips-tdep.c (mips_debug): Add 'unsigned'. (_initialize_mips_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * monitor.c (monitor_debug): Add 'unsigned'. (_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * observer.c (observer_debug): Add 'unsigned'. (_initialize_observer): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * parse.c (expressiondebug): Add 'unsigned'. (_initialize_parse): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.c (record_debug): Add 'unsigned'. (_initialize_record): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.h: Update the declaration of 'record_debug'. * stap-probe.c (stap_expression_debug): Add 'unsigned'. (_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * serial.c (global_serial_debug_p): Add 'unsigned'. (_initialize_serial): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'. (_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-frv.c (solib_frv_debug): Add 'unsigned'. (_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * target.c (targetdebug): Add 'unsigned'. (initialize_targets): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * valops.c (overload_debug): Add 'unsigned'. * varobj.c (varobjdebug): Add 'unsigned'. (_initialize_varobj): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'. (_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * arch-utils.h: Remove the declaration of 'gdbarch_debug'. * gdbarch.sh (gdbarch_debug): Add 'unsigned'. (extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * gdbarch.c, gdbarch.h: Re-generated.
2012-08-02 17:36:40 +08:00
unsigned int gdbarch_debug = GDBARCH_DEBUG;
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 21:51:36 +08:00
static void
show_gdbarch_debug (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Architecture debugging is %s.\n"), value);
}
1999-06-15 02:08:47 +08:00
static const char *
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
pformat (const struct floatformat **format)
{
if (format == NULL)
return "(null)";
else
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
/* Just print out one of them - this is only for diagnostics. */
return format[0]->name;
}
static const char *
pstring (const char *string)
{
if (string == NULL)
return "(null)";
return string;
}
-Wwrite-strings: The Rest This is the remainder boring constification that all looks more of less borderline obvious IMO. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * ada-exp.y (yyerror): Constify. * ada-lang.c (bound_name, get_selections) (ada_variant_discrim_type) (ada_variant_discrim_name, ada_value_struct_elt) (ada_lookup_struct_elt_type, is_unchecked_variant) (ada_which_variant_applies, standard_exc, ada_get_next_arg) (catch_ada_exception_command_split) (catch_ada_assert_command_split, catch_assert_command) (ada_op_name): Constify. * ada-lang.h (ada_yyerror, get_selections) (ada_variant_discrim_name, ada_value_struct_elt): Constify. * arc-tdep.c (arc_print_frame_cache): Constify. * arm-tdep.c (arm_skip_stub): Constify. * ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref) (gen_aggregate_elt_ref): Constify. * bcache.c (print_bcache_statistics): Constify. * bcache.h (print_bcache_statistics): Constify. * break-catch-throw.c (catch_exception_command_1): * breakpoint.c (struct ep_type_description::description): Constify. (add_solib_catchpoint): Constify. (catch_fork_command_1): Add cast. (add_catch_command): Constify. * breakpoint.h (add_catch_command, add_solib_catchpoint): Constify. * bsd-uthread.c (bsd_uthread_state): Constify. * buildsym.c (patch_subfile_names): Constify. * buildsym.h (next_symbol_text_func, patch_subfile_names): Constify. * c-exp.y (yyerror): Constify. (token::oper): Constify. * c-lang.h (c_yyerror, cp_print_class_member): Constify. * c-varobj.c (cplus_describe_child): Constify. * charset.c (find_charset_names): Add cast. (find_charset_names): Constify array and add const_cast. * cli/cli-cmds.c (complete_command, cd_command): Constify. (edit_command): Constify. * cli/cli-decode.c (lookup_cmd): Constify. * cli/cli-dump.c (dump_memory_command, dump_value_command): Constify. (struct dump_context): Constify. (add_dump_command, restore_command): Constify. * cli/cli-script.c (get_command_line): Constify. * cli/cli-script.h (get_command_line): Constify. * cli/cli-utils.c (check_for_argument): Constify. * cli/cli-utils.h (check_for_argument): Constify. * coff-pe-read.c (struct read_pe_section_data): Constify. * command.h (lookup_cmd): Constify. * common/print-utils.c (decimal2str): Constify. * completer.c (gdb_print_filename): Constify. * corefile.c (set_gnutarget): Constify. * cp-name-parser.y (yyerror): Constify. * cp-valprint.c (cp_print_class_member): Constify. * cris-tdep.c (cris_register_name, crisv32_register_name): Constify. * d-exp.y (yyerror): Constify. (struct token::oper): Constify. * d-lang.h (d_yyerror): Constify. * dbxread.c (struct header_file_location::name): Constify. (add_old_header_file, add_new_header_file, last_function_name) (dbx_next_symbol_text, add_bincl_to_list) (find_corresponding_bincl_psymtab, set_namestring) (find_stab_function_addr, read_dbx_symtab, start_psymtab) (dbx_end_psymtab, read_ofile_symtab, process_one_symbol): * defs.h (command_line_input, print_address_symbolic) (deprecated_readline_begin_hook): Constify. * dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name): Constify. * event-top.c (handle_line_of_input): Constify and add cast. * exceptions.c (catch_errors): Constify. * exceptions.h (catch_errors): Constify. * expprint.c (print_subexp_standard, op_string, op_name) (op_name_standard, dump_raw_expression, dump_raw_expression): * expression.h (op_name, op_string, dump_raw_expression): Constify. * f-exp.y (yyerror): Constify. (struct token::oper): Constify. (struct f77_boolean_val::name): Constify. * f-lang.c (f_word_break_characters): Constify. * f-lang.h (f_yyerror): Constify. * fork-child.c (fork_inferior): Add cast. * frv-tdep.c (struct gdbarch_tdep::register_names): Constify. (new_variant): Constify. * gdbarch.sh (pstring_ptr, pstring_list): Constify. * gdbarch.c: Regenerate. * gdbcore.h (set_gnutarget): Constify. * go-exp.y (yyerror): Constify. (token::oper): Constify. * go-lang.h (go_yyerror): Constify. * go32-nat.c (go32_sysinfo): Constify. * guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * guile/scm-param.c (pascm_param_value): Constify. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Constify. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Constify. * ia64-tdep.c (ia64_register_names): Constify. * infcmd.c (construct_inferior_arguments): Constify. (path_command, attach_post_wait): Constify. * language.c (show_range_command, show_case_command) (unk_lang_error): Constify. * language.h (language_defn::la_error) (language_defn::la_name_of_this): Constify. * linespec.c (decode_line_2): Constify. * linux-thread-db.c (thread_db_err_str): Constify. * lm32-tdep.c (lm32_register_name): Constify. * m2-exp.y (yyerror): Constify. * m2-lang.h (m2_yyerror): Constify. * m32r-tdep.c (m32r_register_names): Constify and make static. * m68hc11-tdep.c (m68hc11_register_names): Constify. * m88k-tdep.c (m88k_register_name): Constify. * macroexp.c (appendmem): Constify. * mdebugread.c (fdr_name, add_data_symbol, parse_type) (upgrade_type, parse_external, parse_partial_symbols) (mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab) (new_symbol): Constify. * memattr.c (mem_info_command): Constify. * mep-tdep.c (register_name_from_keyword): Constify. * mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env): Constify. * mi/mi-cmd-stack.c (list_args_or_locals): Constify. * mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify. * mi/mi-main.c (captured_mi_execute_command): Constify and add cast. (mi_execute_async_cli_command): Constify. * mips-tdep.c (mips_register_name): Constify. * mn10300-tdep.c (register_name, mn10300_generic_register_name) (am33_register_name, am33_2_register_name) * moxie-tdep.c (moxie_register_names): Constify. * nat/linux-osdata.c (osdata_type): Constify fields. * nto-tdep.c (nto_parse_redirection): Constify. * objc-lang.c (lookup_struct_typedef, lookup_objc_class) (lookup_child_selector): Constify. (objc_methcall::name): Constify. * objc-lang.h (lookup_objc_class, lookup_child_selector) (lookup_struct_typedef): Constify. * objfiles.c (pc_in_section): Constify. * objfiles.h (pc_in_section): Constify. * p-exp.y (struct token::oper): Constify. (yyerror): Constify. * p-lang.h (pascal_yyerror): Constify. * parser-defs.h (op_name_standard): Constify. (op_print::string): Constify. (exp_descriptor::op_name): Constify. * printcmd.c (print_address_symbolic): Constify. * psymtab.c (print_partial_symbols): Constify. * python/py-breakpoint.c (stop_func): Constify. (bppy_get_expression): Constify. * python/py-cmd.c (cmdpy_completer::name): Constify. (cmdpy_function): Constify. * python/py-event.c (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-event.h (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-evts.c (add_new_registry): Constify. * python/py-finishbreakpoint.c (outofscope_func): Constify. * python/py-framefilter.c (get_py_iter_from_func): Constify. * python/py-inferior.c (get_buffer): Add cast. * python/py-param.c (parm_constant::name): Constify. * python/py-unwind.c (fprint_frame_id): Constify. * python/python.c (gdbpy_parameter_value): Constify. * remote-fileio.c (remote_fio_func_map): Make 'name' const. * remote.c (memory_packet_config::name): Constify. (show_packet_config_cmd, remote_write_bytes) (remote_buffer_add_string): * reverse.c (exec_reverse_once): Constify. * rs6000-tdep.c (variant::name, variant::description): Constify. * rust-exp.y (rustyyerror): Constify. * rust-lang.c (rust_op_name): Constify. * rust-lang.h (rustyyerror): Constify. * serial.h (serial_ops::name): Constify. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name) (sh_sh2a_register_name, sh_sh2a_nofpu_register_name) (sh_sh_dsp_register_name, sh_sh3_dsp_register_name) (sh_sh4_register_name, sh_sh4_nofpu_register_name) (sh_sh4al_dsp_register_name): Constify. * sh64-tdep.c (sh64_register_name): Constify. * solib-darwin.c (lookup_symbol_from_bfd): Constify. * spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify. * stabsread.c (patch_block_stabs, read_type_number) (ref_map::stabs, ref_add, process_reference) (symbol_reference_defined, define_symbol, define_symbol) (error_type, read_type, read_member_functions, read_cpp_abbrev) (read_one_struct_field, read_struct_fields, read_baseclasses) (read_tilde_fields, read_struct_type, read_array_type) (read_enum_type, read_sun_builtin_type, read_sun_floating_type) (read_huge_number, read_range_type, read_args, common_block_start) (find_name_end): Constify. * stabsread.h (common_block_start, define_symbol) (process_one_symbol, symbol_reference_defined, ref_add): * symfile.c (get_section_index, add_symbol_file_command): * symfile.h (get_section_index): Constify. * target-descriptions.c (tdesc_type::name): Constify. (tdesc_free_type): Add cast. * target.c (find_default_run_target): (add_deprecated_target_alias, find_default_run_target) (target_announce_detach): Constify. (do_option): Constify. * target.h (add_deprecated_target_alias): Constify. * thread.c (print_thread_info_1): Constify. * top.c (deprecated_readline_begin_hook, command_line_input): Constify. (init_main): Add casts. * top.h (handle_line_of_input): Constify. * tracefile-tfile.c (tfile_write_uploaded_tsv): Constify. * tracepoint.c (tvariables_info_1, trace_status_mi): Constify. (tfind_command): Rename to ... (tfind_command_1): ... this and constify. (tfind_command): New function. (tfind_end_command, tfind_start_command): Adjust. (encode_source_string): Constify. * tracepoint.h (encode_source_string): Constify. * tui/tui-data.c (tui_partial_win_by_name): Constify. * tui/tui-data.h (tui_partial_win_by_name): Constify. * tui/tui-source.c (tui_set_source_content_nil): Constify. * tui/tui-source.h (tui_set_source_content_nil): Constify. * tui/tui-win.c (parse_scrolling_args): Constify. * tui/tui-windata.c (tui_erase_data_content): Constify. * tui/tui-windata.h (tui_erase_data_content): Constify. * tui/tui-winsource.c (tui_erase_source_content): Constify. * tui/tui.c (tui_enable): Add cast. * utils.c (defaulted_query): Constify. (init_page_info): Add cast. (puts_debug, subset_compare): Constify. * utils.h (subset_compare): Constify. * varobj.c (varobj_format_string): Constify. * varobj.h (varobj_format_string): Constify. * vax-tdep.c (vax_register_name): Constify. * windows-nat.c (windows_detach): Constify. * xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify. * xml-support.c (gdb_xml_end_element): Constify. * xml-tdesc.c (tdesc_start_reg): Constify. * xstormy16-tdep.c (xstormy16_register_name): Constify. * xtensa-tdep.c (xtensa_find_register_by_name): Constify. * xtensa-tdep.h (xtensa_register_t::name): Constify. gdb/gdbserver/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * gdbreplay.c (sync_error): Constify. * linux-x86-low.c (push_opcode): Constify.
2017-04-06 02:21:37 +08:00
static const char *
pstring_ptr (char **string)
{
if (string == NULL || *string == NULL)
return "(null)";
return *string;
}
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
/* Helper function to print a list of strings, represented as "const
char *const *". The list is printed comma-separated. */
-Wwrite-strings: The Rest This is the remainder boring constification that all looks more of less borderline obvious IMO. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * ada-exp.y (yyerror): Constify. * ada-lang.c (bound_name, get_selections) (ada_variant_discrim_type) (ada_variant_discrim_name, ada_value_struct_elt) (ada_lookup_struct_elt_type, is_unchecked_variant) (ada_which_variant_applies, standard_exc, ada_get_next_arg) (catch_ada_exception_command_split) (catch_ada_assert_command_split, catch_assert_command) (ada_op_name): Constify. * ada-lang.h (ada_yyerror, get_selections) (ada_variant_discrim_name, ada_value_struct_elt): Constify. * arc-tdep.c (arc_print_frame_cache): Constify. * arm-tdep.c (arm_skip_stub): Constify. * ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref) (gen_aggregate_elt_ref): Constify. * bcache.c (print_bcache_statistics): Constify. * bcache.h (print_bcache_statistics): Constify. * break-catch-throw.c (catch_exception_command_1): * breakpoint.c (struct ep_type_description::description): Constify. (add_solib_catchpoint): Constify. (catch_fork_command_1): Add cast. (add_catch_command): Constify. * breakpoint.h (add_catch_command, add_solib_catchpoint): Constify. * bsd-uthread.c (bsd_uthread_state): Constify. * buildsym.c (patch_subfile_names): Constify. * buildsym.h (next_symbol_text_func, patch_subfile_names): Constify. * c-exp.y (yyerror): Constify. (token::oper): Constify. * c-lang.h (c_yyerror, cp_print_class_member): Constify. * c-varobj.c (cplus_describe_child): Constify. * charset.c (find_charset_names): Add cast. (find_charset_names): Constify array and add const_cast. * cli/cli-cmds.c (complete_command, cd_command): Constify. (edit_command): Constify. * cli/cli-decode.c (lookup_cmd): Constify. * cli/cli-dump.c (dump_memory_command, dump_value_command): Constify. (struct dump_context): Constify. (add_dump_command, restore_command): Constify. * cli/cli-script.c (get_command_line): Constify. * cli/cli-script.h (get_command_line): Constify. * cli/cli-utils.c (check_for_argument): Constify. * cli/cli-utils.h (check_for_argument): Constify. * coff-pe-read.c (struct read_pe_section_data): Constify. * command.h (lookup_cmd): Constify. * common/print-utils.c (decimal2str): Constify. * completer.c (gdb_print_filename): Constify. * corefile.c (set_gnutarget): Constify. * cp-name-parser.y (yyerror): Constify. * cp-valprint.c (cp_print_class_member): Constify. * cris-tdep.c (cris_register_name, crisv32_register_name): Constify. * d-exp.y (yyerror): Constify. (struct token::oper): Constify. * d-lang.h (d_yyerror): Constify. * dbxread.c (struct header_file_location::name): Constify. (add_old_header_file, add_new_header_file, last_function_name) (dbx_next_symbol_text, add_bincl_to_list) (find_corresponding_bincl_psymtab, set_namestring) (find_stab_function_addr, read_dbx_symtab, start_psymtab) (dbx_end_psymtab, read_ofile_symtab, process_one_symbol): * defs.h (command_line_input, print_address_symbolic) (deprecated_readline_begin_hook): Constify. * dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name): Constify. * event-top.c (handle_line_of_input): Constify and add cast. * exceptions.c (catch_errors): Constify. * exceptions.h (catch_errors): Constify. * expprint.c (print_subexp_standard, op_string, op_name) (op_name_standard, dump_raw_expression, dump_raw_expression): * expression.h (op_name, op_string, dump_raw_expression): Constify. * f-exp.y (yyerror): Constify. (struct token::oper): Constify. (struct f77_boolean_val::name): Constify. * f-lang.c (f_word_break_characters): Constify. * f-lang.h (f_yyerror): Constify. * fork-child.c (fork_inferior): Add cast. * frv-tdep.c (struct gdbarch_tdep::register_names): Constify. (new_variant): Constify. * gdbarch.sh (pstring_ptr, pstring_list): Constify. * gdbarch.c: Regenerate. * gdbcore.h (set_gnutarget): Constify. * go-exp.y (yyerror): Constify. (token::oper): Constify. * go-lang.h (go_yyerror): Constify. * go32-nat.c (go32_sysinfo): Constify. * guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * guile/scm-param.c (pascm_param_value): Constify. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Constify. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Constify. * ia64-tdep.c (ia64_register_names): Constify. * infcmd.c (construct_inferior_arguments): Constify. (path_command, attach_post_wait): Constify. * language.c (show_range_command, show_case_command) (unk_lang_error): Constify. * language.h (language_defn::la_error) (language_defn::la_name_of_this): Constify. * linespec.c (decode_line_2): Constify. * linux-thread-db.c (thread_db_err_str): Constify. * lm32-tdep.c (lm32_register_name): Constify. * m2-exp.y (yyerror): Constify. * m2-lang.h (m2_yyerror): Constify. * m32r-tdep.c (m32r_register_names): Constify and make static. * m68hc11-tdep.c (m68hc11_register_names): Constify. * m88k-tdep.c (m88k_register_name): Constify. * macroexp.c (appendmem): Constify. * mdebugread.c (fdr_name, add_data_symbol, parse_type) (upgrade_type, parse_external, parse_partial_symbols) (mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab) (new_symbol): Constify. * memattr.c (mem_info_command): Constify. * mep-tdep.c (register_name_from_keyword): Constify. * mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env): Constify. * mi/mi-cmd-stack.c (list_args_or_locals): Constify. * mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify. * mi/mi-main.c (captured_mi_execute_command): Constify and add cast. (mi_execute_async_cli_command): Constify. * mips-tdep.c (mips_register_name): Constify. * mn10300-tdep.c (register_name, mn10300_generic_register_name) (am33_register_name, am33_2_register_name) * moxie-tdep.c (moxie_register_names): Constify. * nat/linux-osdata.c (osdata_type): Constify fields. * nto-tdep.c (nto_parse_redirection): Constify. * objc-lang.c (lookup_struct_typedef, lookup_objc_class) (lookup_child_selector): Constify. (objc_methcall::name): Constify. * objc-lang.h (lookup_objc_class, lookup_child_selector) (lookup_struct_typedef): Constify. * objfiles.c (pc_in_section): Constify. * objfiles.h (pc_in_section): Constify. * p-exp.y (struct token::oper): Constify. (yyerror): Constify. * p-lang.h (pascal_yyerror): Constify. * parser-defs.h (op_name_standard): Constify. (op_print::string): Constify. (exp_descriptor::op_name): Constify. * printcmd.c (print_address_symbolic): Constify. * psymtab.c (print_partial_symbols): Constify. * python/py-breakpoint.c (stop_func): Constify. (bppy_get_expression): Constify. * python/py-cmd.c (cmdpy_completer::name): Constify. (cmdpy_function): Constify. * python/py-event.c (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-event.h (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-evts.c (add_new_registry): Constify. * python/py-finishbreakpoint.c (outofscope_func): Constify. * python/py-framefilter.c (get_py_iter_from_func): Constify. * python/py-inferior.c (get_buffer): Add cast. * python/py-param.c (parm_constant::name): Constify. * python/py-unwind.c (fprint_frame_id): Constify. * python/python.c (gdbpy_parameter_value): Constify. * remote-fileio.c (remote_fio_func_map): Make 'name' const. * remote.c (memory_packet_config::name): Constify. (show_packet_config_cmd, remote_write_bytes) (remote_buffer_add_string): * reverse.c (exec_reverse_once): Constify. * rs6000-tdep.c (variant::name, variant::description): Constify. * rust-exp.y (rustyyerror): Constify. * rust-lang.c (rust_op_name): Constify. * rust-lang.h (rustyyerror): Constify. * serial.h (serial_ops::name): Constify. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name) (sh_sh2a_register_name, sh_sh2a_nofpu_register_name) (sh_sh_dsp_register_name, sh_sh3_dsp_register_name) (sh_sh4_register_name, sh_sh4_nofpu_register_name) (sh_sh4al_dsp_register_name): Constify. * sh64-tdep.c (sh64_register_name): Constify. * solib-darwin.c (lookup_symbol_from_bfd): Constify. * spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify. * stabsread.c (patch_block_stabs, read_type_number) (ref_map::stabs, ref_add, process_reference) (symbol_reference_defined, define_symbol, define_symbol) (error_type, read_type, read_member_functions, read_cpp_abbrev) (read_one_struct_field, read_struct_fields, read_baseclasses) (read_tilde_fields, read_struct_type, read_array_type) (read_enum_type, read_sun_builtin_type, read_sun_floating_type) (read_huge_number, read_range_type, read_args, common_block_start) (find_name_end): Constify. * stabsread.h (common_block_start, define_symbol) (process_one_symbol, symbol_reference_defined, ref_add): * symfile.c (get_section_index, add_symbol_file_command): * symfile.h (get_section_index): Constify. * target-descriptions.c (tdesc_type::name): Constify. (tdesc_free_type): Add cast. * target.c (find_default_run_target): (add_deprecated_target_alias, find_default_run_target) (target_announce_detach): Constify. (do_option): Constify. * target.h (add_deprecated_target_alias): Constify. * thread.c (print_thread_info_1): Constify. * top.c (deprecated_readline_begin_hook, command_line_input): Constify. (init_main): Add casts. * top.h (handle_line_of_input): Constify. * tracefile-tfile.c (tfile_write_uploaded_tsv): Constify. * tracepoint.c (tvariables_info_1, trace_status_mi): Constify. (tfind_command): Rename to ... (tfind_command_1): ... this and constify. (tfind_command): New function. (tfind_end_command, tfind_start_command): Adjust. (encode_source_string): Constify. * tracepoint.h (encode_source_string): Constify. * tui/tui-data.c (tui_partial_win_by_name): Constify. * tui/tui-data.h (tui_partial_win_by_name): Constify. * tui/tui-source.c (tui_set_source_content_nil): Constify. * tui/tui-source.h (tui_set_source_content_nil): Constify. * tui/tui-win.c (parse_scrolling_args): Constify. * tui/tui-windata.c (tui_erase_data_content): Constify. * tui/tui-windata.h (tui_erase_data_content): Constify. * tui/tui-winsource.c (tui_erase_source_content): Constify. * tui/tui.c (tui_enable): Add cast. * utils.c (defaulted_query): Constify. (init_page_info): Add cast. (puts_debug, subset_compare): Constify. * utils.h (subset_compare): Constify. * varobj.c (varobj_format_string): Constify. * varobj.h (varobj_format_string): Constify. * vax-tdep.c (vax_register_name): Constify. * windows-nat.c (windows_detach): Constify. * xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify. * xml-support.c (gdb_xml_end_element): Constify. * xml-tdesc.c (tdesc_start_reg): Constify. * xstormy16-tdep.c (xstormy16_register_name): Constify. * xtensa-tdep.c (xtensa_find_register_by_name): Constify. * xtensa-tdep.h (xtensa_register_t::name): Constify. gdb/gdbserver/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * gdbreplay.c (sync_error): Constify. * linux-x86-low.c (push_opcode): Constify.
2017-04-06 02:21:37 +08:00
static const char *
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
pstring_list (const char *const *list)
{
static char ret[100];
const char *const *p;
size_t offset = 0;
if (list == NULL)
return "(null)";
ret[0] = '\0';
for (p = list; *p != NULL && offset < sizeof (ret); ++p)
{
size_t s = xsnprintf (ret + offset, sizeof (ret) - offset, "%s, ", *p);
offset += 2 + s;
}
if (offset > 0)
{
gdb_assert (offset - 2 < sizeof (ret));
ret[offset - 2] = '\0';
}
return ret;
}
1999-06-15 02:08:47 +08:00
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Maintain the struct gdbarch object. */
1999-06-15 02:08:47 +08:00
struct gdbarch
1999-07-20 07:30:11 +08:00
{
/* Has this architecture been fully initialized? */
int initialized_p;
/* An obstack bound to the lifetime of the architecture. */
struct obstack *obstack;
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* basic architectural information. */
1999-07-20 07:30:11 +08:00
const struct bfd_arch_info * bfd_arch_info;
enum bfd_endian byte_order;
enum bfd_endian byte_order_for_code;
enum gdb_osabi osabi;
const struct target_desc * target_desc;
1999-06-15 02:08:47 +08:00
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* target specific vector. */
1999-07-20 07:30:11 +08:00
struct gdbarch_tdep *tdep;
gdbarch_dump_tdep_ftype *dump_tdep;
1999-06-15 02:08:47 +08:00
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* per-architecture data-pointers. */
unsigned nr_data;
1999-07-20 07:30:11 +08:00
void **data;
1999-06-15 02:08:47 +08:00
1999-07-20 07:30:11 +08:00
/* Multi-arch values.
1999-06-15 02:08:47 +08:00
1999-07-20 07:30:11 +08:00
When extending this structure you must:
1999-06-15 02:08:47 +08:00
1999-07-20 07:30:11 +08:00
Add the field below.
1999-06-15 02:08:47 +08:00
1999-07-20 07:30:11 +08:00
Declare set/get functions and define the corresponding
macro in gdbarch.h.
1999-06-15 02:08:47 +08:00
1999-07-20 07:30:11 +08:00
gdbarch_alloc(): If zero/NULL is not a suitable default,
initialize the new field.
1999-06-15 02:08:47 +08:00
1999-07-20 07:30:11 +08:00
verify_gdbarch(): Confirm that the target updated the field
correctly.
1999-06-15 02:08:47 +08:00
gdbarch_dump(): Add a fprintf_unfiltered call so that the new
1999-07-20 07:30:11 +08:00
field is dumped out
1999-06-15 02:08:47 +08:00
1999-07-20 07:30:11 +08:00
get_gdbarch(): Implement the set/get functions (probably using
the macro's as shortcuts).
1999-06-15 02:08:47 +08:00
*/
int bits_big_endian;
1999-07-20 07:30:11 +08:00
int short_bit;
int int_bit;
int long_bit;
int long_long_bit;
int half_bit;
const struct floatformat ** half_format;
1999-07-20 07:30:11 +08:00
int float_bit;
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat ** float_format;
1999-07-20 07:30:11 +08:00
int double_bit;
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat ** double_format;
1999-07-20 07:30:11 +08:00
int long_double_bit;
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat ** long_double_format;
Teach GDB that wchar_t is a built-in type in C++ mode GDB is currently not aware that wchar_t is a built-in type in C++ mode. This is usually not a problem because the debug info describes the type, so when you have a program loaded, you don't notice this. However, if you try expressions involving wchar_t before a program is loaded, gdb errors out: (gdb) p (wchar_t)-1 No symbol table is loaded. Use the "file" command. (gdb) p L"hello" No type named wchar_t. (gdb) ptype L"hello" No type named wchar_t. This commit teaches gdb about the type. After: (gdb) p (wchar_t)-1 $1 = -1 L'\xffffffff' (gdb) p L"hello" $2 = L"hello" (gdb) ptype L"hello" type = wchar_t [6] Unlike char16_t/char32_t, unfortunately, the underlying type of wchar_t is implementation dependent, both size and signness. So this requires adding a couple new gdbarch hooks. I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it seems to me that the majority of the ABIs have a 4-byte signed wchar_t, so that's what I made the default for GDB too. And then I looked for which ports have a 16-bit and/or unsigned wchar_t, and made GDB follow suit. gdb/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>: New enum value. (cplus_language_arch_info): Register cplus_primitive_type_wchar_t. * gdbtypes.h (struct builtin_type) <builtin_wchar>: New field. * gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type. * gdbarch.sh (wchar_bit, wchar_signed): New per-arch values. * gdbarch.h, gdbarch.c: Regenerate. * aarch64-tdep.c (aarch64_gdbarch_init): Override gdbarch_wchar_bit and gdbarch_wchar_signed. * alpha-tdep.c (alpha_gdbarch_init): Likewise. * arm-tdep.c (arm_gdbarch_init): Likewise. * avr-tdep.c (avr_gdbarch_init): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * i386-nto-tdep.c (i386nto_init_abi): Likewise. * i386-tdep.c (i386_go32_init_abi): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * sparc64-tdep.c (sparc64_init_abi): Likewise. * windows-tdep.c (windows_init_abi): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. gdb/testsuite/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * gdb.cp/wide_char_types.c: Include <wchar.h>. (wchar): New global. * gdb.cp/wide_char_types.exp (wide_char_types_program) (do_test_wide_char, wide_char_types_no_program, top level): Add wchar_t testing.
2017-04-12 21:00:49 +08:00
int wchar_bit;
int wchar_signed;
Add gdbarch callback to provide formats for debug info float types At this point, all TYPE_CODE_FLT types carry their floating-point format, except for those creating from reading DWARF or stabs debug info. Those will be addressed by this commit. The main issue here is that we actually have to determine which floating- point format to use. Currently, we only have the type length as input to this decision. In the future, we may hopefully get --at least in DWARF-- additional information to help disambiguate multiple different formats of the same length. For now, we can still look at the type name as a hint. This decision logic is encapsulated in a gdbarch callback to allow platform-specific overrides. The default implementation use the same logic (compare type length against the various gdbarch_..._bit sizes) that is currently implemented in floatformat_from_length. With this commit, all platforms still use the default logic, so there should be no actual change in behavior. A follow-on commit will add support for __float128 on Intel and Power. Once dwarf2read.c and stabsread.c make use of the new callback to determine floating-point formats, we're now sure every TYPE_CODE_FLT type will always carry its format. The commit therefore adds asserts to verify_floatformat to ensure new code will continue to always provide formats, and removes the code in floatformat_from_type that used to handle types with a NULL TYPE_FLOATFORMAT. gdb/ChangeLog: * gdbarch.sh (floatformat_for_type): New gdbarch callback. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (default_floatformat_for_type): New prototype. * arch-utils.c (default_floatformat_for_type): New function. * doublest.c (floatformat_from_length): Remove. (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL. * gdbtypes.c (verify_floatformat): Require non-NULL format. * dwarf2read.c (dwarf2_init_float_type): New function. (read_base_type): Use it. * stabsread.c (dbx_init_float_type): New function. (read_sun_floating_type): Use it. (read_range_type): Likewise. Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
2016-09-06 23:31:53 +08:00
gdbarch_floatformat_for_type_ftype *floatformat_for_type;
2000-08-11 10:55:38 +08:00
int ptr_bit;
int addr_bit;
int dwarf2_addr_size;
int char_signed;
1999-07-20 07:30:11 +08:00
gdbarch_read_pc_ftype *read_pc;
gdbarch_write_pc_ftype *write_pc;
gdbarch_virtual_frame_pointer_ftype *virtual_frame_pointer;
gdbarch_pseudo_register_read_ftype *pseudo_register_read;
gdbarch_pseudo_register_read_value_ftype *pseudo_register_read_value;
gdbarch_pseudo_register_write_ftype *pseudo_register_write;
1999-07-20 07:30:11 +08:00
int num_regs;
int num_pseudo_regs;
gdbarch_ax_pseudo_register_collect_ftype *ax_pseudo_register_collect;
gdbarch_ax_pseudo_register_push_stack_ftype *ax_pseudo_register_push_stack;
Intel MPX bound violation handling With Intel Memory Protection Extensions it was introduced the concept of boundary violation. A boundary violations is presented to the inferior as a segmentation fault having SIGCODE 3. This patch adds a handler for a boundary violation extending the information displayed when a bound violation is presented to the inferior. In the stop mode case the debugger will also display the kind of violation: "upper" or "lower", bounds and the address accessed. On no stop mode the information will still remain unchanged. Additional information about bound violations are not meaningful in that case user does not know the line in which violation occurred as well. When the segmentation fault handler is stop mode the out puts will be changed as exemplified below. The usual output of a segfault is: Program received signal SIGSEGV, Segmentation fault 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In case it is a bound violation it will be presented as: Program received signal SIGSEGV, Segmentation fault Upper bound violation while accessing address 0x7fffffffc3b3 Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3] 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In mi mode the output of a segfault is: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c", func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"} ,{name="b",value="0x603050"}, {name="c",value="0x603070"}, {name="d",value="0x603090"},{name="len",value="7"}], file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"}, thread-id="1",stopped-threads="all",core="6" in the case of a bound violation: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", sigcode-meaning="Upper bound violation", lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f", frame={addr="0x0000000000400d7c",func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"}, {name="c",value="0x603070"},{name="d",value="0x603090"}, {name="len",value="7"}],file="i386-mpx-sigsegv.c", fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1", stopped-threads="all",core="6" 2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com> gdb/ChangeLog: * NEWS: Add entry for bound violation. * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add handler for segmentation fault. * gdbarch.sh (handle_segmentation_fault): New. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New. (SIG_CODE_BONDARY_FAULT): New define. (i386_linux_init_abi): Use i386_mpx_bound_violation_handler. * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New. * i386-tdep.c (i386_mpx_enabled): Add as external. * i386-tdep.c (i386_mpx_enabled): Add as external. * infrun.c (handle_segmentation_fault): New function. (print_signal_received_reason): Use handle_segmentation_fault. gdb/testsuite/ChangeLog: * gdb.arch/i386-mpx-sigsegv.c: New file. * gdb.arch/i386-mpx-sigsegv.exp: New file. * gdb.arch/i386-mpx-simple_segv.c: New file. * gdb.arch/i386-mpx-simple_segv.exp: New file. gdb/doc/ChangeLog: * gdb.texinfo (Signals): Add bound violation display hints for a SIGSEGV.
2016-02-19 00:24:59 +08:00
gdbarch_handle_segmentation_fault_ftype *handle_segmentation_fault;
1999-07-20 07:30:11 +08:00
int sp_regnum;
int pc_regnum;
int ps_regnum;
int fp0_regnum;
gdbarch_stab_reg_to_regnum_ftype *stab_reg_to_regnum;
gdbarch_ecoff_reg_to_regnum_ftype *ecoff_reg_to_regnum;
gdbarch_sdb_reg_to_regnum_ftype *sdb_reg_to_regnum;
gdbarch_dwarf2_reg_to_regnum_ftype *dwarf2_reg_to_regnum;
1999-07-20 07:30:11 +08:00
gdbarch_register_name_ftype *register_name;
gdbarch_register_type_ftype *register_type;
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
gdbarch_dummy_id_ftype *dummy_id;
int deprecated_fp_regnum;
gdbarch_push_dummy_call_ftype *push_dummy_call;
1999-07-20 07:30:11 +08:00
int call_dummy_location;
gdbarch_push_dummy_code_ftype *push_dummy_code;
Skip unwritable frames in command "finish" Nowadays, GDB can't insert breakpoint on the return address of the exception handler on ARM M-profile, because the address is a magic one 0xfffffff9, (gdb) bt #0 CT32B1_IRQHandler () at ../src/timer.c:67 #1 <signal handler called> #2 main () at ../src/timer.c:127 (gdb) info frame Stack level 0, frame at 0x200ffa8: pc = 0x4ec in CT32B1_IRQHandler (../src/timer.c:67); saved pc = 0xfffffff9 called by frame at 0x200ffc8 source language c. Arglist at 0x200ffa0, args: Locals at 0x200ffa0, Previous frame's sp is 0x200ffa8 Saved registers: r7 at 0x200ffa0, lr at 0x200ffa4 (gdb) x/x 0xfffffff9 0xfffffff9: Cannot access memory at address 0xfffffff9 (gdb) finish Run till exit from #0 CT32B1_IRQHandler () at ../src/timer.c:67 Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 0. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. even some debug probe can't set hardware breakpoint on the magic address too, (gdb) hbreak *0xfffffff9 Hardware assisted breakpoint 2 at 0xfffffff9 (gdb) c Continuing. Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 2. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. The problem described above is quite similar to PR 8841, in which GDB can't set breakpoint on signal trampoline, which is mapped to a read-only page by kernel. The rationale of this patch is to skip "unwritable" frames when looking for caller frames in command "finish", and a new gdbarch method code_of_frame_writable is added. This patch fixes the problem on ARM cortex-m target, but it can be used to fix PR 8841 too. gdb: 2016-05-10 Yao Qi <yao.qi@arm.com> * arch-utils.c (default_code_of_frame_writable): New function. * arch-utils.h (default_code_of_frame_writable): Declare. * arm-tdep.c (arm_code_of_frame_writable): New function. (arm_gdbarch_init): Install gdbarch method code_of_frame_writable if the target is M-profile. * frame.c (skip_unwritable_frames): New function. * frame.h (skip_unwritable_frames): Declare. * gdbarch.sh (code_of_frame_writable): New. * gdbarch.c, gdbarch.h: Re-generated. * infcmd.c (finish_command): Call skip_unwritable_frames.
2016-05-24 00:32:56 +08:00
gdbarch_code_of_frame_writable_ftype *code_of_frame_writable;
gdbarch_print_registers_info_ftype *print_registers_info;
gdbarch_print_float_info_ftype *print_float_info;
gdbarch_print_vector_info_ftype *print_vector_info;
gdbarch_register_sim_regno_ftype *register_sim_regno;
gdbarch_cannot_fetch_register_ftype *cannot_fetch_register;
gdbarch_cannot_store_register_ftype *cannot_store_register;
gdbarch_get_longjmp_target_ftype *get_longjmp_target;
1999-07-20 07:30:11 +08:00
int believe_pcc_promotion;
gdbarch_convert_register_p_ftype *convert_register_p;
gdbarch_register_to_value_ftype *register_to_value;
gdbarch_value_to_register_ftype *value_to_register;
gdbarch_value_from_register_ftype *value_from_register;
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
gdbarch_pointer_to_address_ftype *pointer_to_address;
gdbarch_address_to_pointer_ftype *address_to_pointer;
gdbarch_integer_to_address_ftype *integer_to_address;
gdbarch_return_value_ftype *return_value;
gdbarch_return_in_first_hidden_param_p_ftype *return_in_first_hidden_param_p;
1999-07-20 07:30:11 +08:00
gdbarch_skip_prologue_ftype *skip_prologue;
gdbarch_skip_main_prologue_ftype *skip_main_prologue;
PowerPC64 ELFv2 ABI: skip global entry point code This patch handles another aspect of the ELFv2 ABI, which unfortunately requires common code changes. In ELFv2, functions may provide both a global and a local entry point. The global entry point (where the function symbol points to) is intended to be used for function-pointer or cross-module (PLT) calls, and requires r12 to be set up to the entry point address itself. The local entry point (which is found at a fixed offset after the global entry point, as defined by bits in the symbol table entries' st_other field), instead expects r2 to be set up to the current TOC. Now, when setting a breakpoint on a function by name, you really want that breakpoint to trigger either way, no matter whether the function is called via its local or global entry point. Since the global entry point will always fall through into the local entry point, the way to achieve that is to simply set the breakpoint at the local entry point. One way to do that would be to have prologue parsing skip the code sequence that makes up the global entry point. Unfortunately, this does not work reliably, since -for optimized code- GDB these days will not actuall invoke the prologue parsing code but instead just set the breakpoint at the symbol address and rely on DWARF being correct at any point throughout the function ... Unfortunately, I don't really see any way to express the notion of local entry points with the current set of gdbarch callbacks. Thus this patch adds a new callback, skip_entrypoint, that is somewhat analogous to skip_prologue, but is called every time GDB needs to determine a function start address, even in those cases where GDB decides to not call skip_prologue. As a side effect, the skip_entrypoint implementation on ppc64 does not need to perform any instruction parsing; it can simply rely on the local entry point flags in the symbol table entry. With this implemented, two test cases would still fail to set the breakpoint correctly, but that's because they use the construct: gdb_test "break *hello" Now, using "*hello" explicitly instructs GDB to set the breakpoint at the numerical value of "hello" treated as function pointer, so it will by definition only hit the global entry point. I think this behaviour is unavoidable, but acceptable -- most people do not use this construct, and if they do, they get what they asked for ... In one of those two test cases, use of this construct is really not appropriate. I think this was added way back when as a means to work around prologue skipping problems on some platforms. These days that shouldn't really be necessary any more ... For the other (step-bt), we really want to make sure backtracing works on the very first instruction of the routine. To enable that test also on powerpc64le-linux, we can modify the code to call the test function via function pointer (which makes it use the global entry point in the ELFv2 ABI). gdb/ChangeLog: * gdbarch.sh (skip_entrypoint): New callback. * gdbarch.c, gdbarch.h: Regenerate. * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint. * infrun.c (fill_in_stop_func): Likewise. * ppc-linux-tdep.c: Include "elf/ppc64.h". (ppc_elfv2_elf_make_msymbol_special): New function. (ppc_elfv2_skip_entrypoint): Likewise. (ppc_linux_init_abi): Install them for ELFv2. gdb/testsuite/ChangeLog: * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint on a function. * gdb.base/step-bt.c: Call hello via function pointer to make sure its first instruction is executed on powerpc64le-linux.
2014-02-05 01:44:14 +08:00
gdbarch_skip_entrypoint_ftype *skip_entrypoint;
1999-07-20 07:30:11 +08:00
gdbarch_inner_than_ftype *inner_than;
gdbarch_breakpoint_from_pc_ftype *breakpoint_from_pc;
New gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind This patch adds two gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind, and uses target_info.placed_size as "kind" of the breakpoint. This patch updates the usages of target_info.placed_size. The "kind" of a breakpoint is determined by gdbarch rather than target, so we have gdbarch method breakpoint_kind_from_pc, and we should set target_info.placed_size out of each implementation of target to_insert_breakpoint. In this way, each target doesn't have to set target_info.placed_size any more. This patch also sets target_info.placed_address before target_insert_breakpoint too, so that target to_insert_breakpoint can use it, see record_full_insert_breakpoint. Before we call target_insert_breakpoint, we set target_info.placed_address and target_info.placed_size like this, CORE_ADDR addr = bl->target_info.reqstd_address; bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr); bl->target_info.placed_address = addr; return target_insert_breakpoint (bl->gdbarch, &bl->target_info); target_insert_breakpoint may fail, but it doesn't matter to the "kind" and "placed_address" of a breakpoint. They should be determined by gdbarch. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define breakpoint_kind_from_pc and sw_breakpoint_from_kind. (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call set_gdbarch_breakpoint_kind_from_pc and set_gdbarch_sw_breakpoint_from_kind. * arm-tdep.c: Add comments. * bfin-tdep.c: Likewise. * breakpoint.c (breakpoint_kind): New function. (insert_bp_location): Set target_info.placed_size and target_info.placed_address. (bkpt_insert_location): Likewise. * cris-tdep.c: Add comments. * gdbarch.sh (breakpoint_kind_from_pc): New. (sw_breakpoint_from_kind): New. * gdbarch.c, gdbarch.h: Regenerated. * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set bp_tgt->placed_size. (ia64_memory_remove_breakpoint): Don't assert bp_tgt->placed_size. (ia64_breakpoint_kind_from_pc): New function. (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc. * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set bp_tgt->placed_size. * mem-break.c (default_memory_insert_breakpoint): Don't set bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind. (default_memory_remove_breakpoint): Call gdbarch_sw_breakpoint_from_kind. (memory_validate_breakpoint): Don't check bp_tgt->placed_size. * mips-tdep.c: Add comments. * mt-tdep.c: Likewise. * nios2-tdep.c: Likewise. * record-full.c (record_full_insert_breakpoint): Don't call gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address and bp_tgt->placed_size. * remote.c (remote_insert_breakpoint): Don't call gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size. Don't set bp_tgt->placed_address and bp_tgt->placed_size. (remote_insert_hw_breakpoint): Likewise. * score-tdep.c: Likewise. * sh-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * v850-tdep.c: Likewise. * xtensa-tdep.c: Likewise.
2016-11-03 22:35:13 +08:00
gdbarch_breakpoint_kind_from_pc_ftype *breakpoint_kind_from_pc;
gdbarch_sw_breakpoint_from_kind_ftype *sw_breakpoint_from_kind;
gdbarch_breakpoint_kind_from_current_state_ftype *breakpoint_kind_from_current_state;
gdbarch_adjust_breakpoint_address_ftype *adjust_breakpoint_address;
1999-10-19 10:47:02 +08:00
gdbarch_memory_insert_breakpoint_ftype *memory_insert_breakpoint;
gdbarch_memory_remove_breakpoint_ftype *memory_remove_breakpoint;
1999-07-20 07:30:11 +08:00
CORE_ADDR decr_pc_after_break;
CORE_ADDR deprecated_function_start_offset;
* Makefile.in (arm-tdep.o, eval.o, target-descriptions.o) (xml-tdesc.o): Update. * xml-support.c: Add a comment. (gdb_xml_enums_boolean): New variable. (gdb_xml_parse_attr_enum): Use strcasecmp. * xml-support.h (gdb_xml_enums_boolean): Declare. * xml-tdesc.c (struct tdesc_parsing_data): Record current_feature, next_regnum, and current_union. (tdesc_start_feature, tdesc_start_reg, tdesc_start_union) (tdesc_end_union, tdesc_start_field, tdesc_start_vector) (field_attributes, union_children, reg_attributes, union_attributes) (vector_attributes, feature_attributes, feature_children): New. (target_children): Make static. Add <feature>. (tdesc_elements): Make static. * target-descriptions.c (struct tdesc_reg, tdesc_reg_p, type_p) (struct tdesc_feature, tdesc_feature_p): New types. (struct target_desc): Add features member. (struct tdesc_arch_data, tdesc_data): New. (target_find_description): Clarify error message. Warn about ignored register descriptions. (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_data_init, tdesc_data_alloc) (tdesc_data_cleanup, tdesc_numbered_register) (tdesc_numbered_register_choices, tdesc_find_register) (tdesc_register_name, tdesc_register_type) (tdesc_remote_register_number, tdesc_register_reggroup_p) (set_tdesc_pseudo_register_name, set_tdesc_pseudo_register_type) (set_tdesc_pseudo_register_reggroup_p, tdesc_use_registers) (tdesc_free_reg, tdesc_create_reg, tdesc_free_feature) (tdesc_create_feature, tdesc_record_type): New. (free_target_description): Free features. (_initialize_target_descriptions): Initialize tdesc_data. * arch-utils.c (default_remote_register_number): New. * arch-utils.h (default_remote_register_number): New prototype. * target-descriptions.h (set_tdesc_pseudo_register_name) (set_tdesc_pseudo_register_type, set_tdesc_pseudo_register_reggroup_p) (tdesc_use_registers, tdesc_data_alloc, tdesc_data_cleanup) (tdesc_numbered_register, tdesc_numbered_register_choices) (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_create_feature, tdesc_record_type) (tdesc_create_reg): Declare. * gdbarch.sh (remote_register_number): New entry. * gdbarch.c, gdbarch.h: Regenerate. * remote.c (init_remote_state): Use gdbarch_remote_register_number. * features/gdb-target.dtd: Add feature, reg, vector, union, and field. * arm-tdep.c (arm_register_aliases): New. (arm_register_name_strings): Rename to... (arm_register_names): ...this. Make const. Delete the old version. (current_option, arm_register_byte): Delete. (set_disassembly_style): Simplify. Do not adjust arm_register_names. (value_of_arm_user_reg): New. (arm_gdbarch_init): Verify any described registers. Call tdesc_use_registers. Don't use arm_register_byte. Create aliases for standard register names. (_initialize_arm_tdep): Do not adjust arm_register_names. * user-regs.c (struct user_reg): Add baton member. (append_user_reg, user_reg_add_builtin, user_regs_init) (user_reg_add, value_of_user_reg): Use a baton for user register functions. * std-regs.c: Update. * user-regs.h (user_reg_read_ftype, user_reg_add_builtin) (user_reg_add): Add baton argument. * NEWS: Mention target description register support. * features/arm-core.xml, features/arm-fpa.xml: New. * eval.c (evaluate_subexp_standard): Allow ptype $register when the program is not running. * gdb.texinfo (-target-disconnect): Use @smallexample. (Requirements): Add anchor for Expat. Update description. (Target Descriptions): Mention Expat. (Target Description Format): Document new elements. Use @smallexample. (Predefined Target Types, Standard Target Features): New sections. * doc/gdbint.texinfo (Target Descriptions): New section. * gdb.xml/single-reg.xml, gdb.xml/tdesc-regs.exp, gdb.xml/core-only.xml, gdb.xml/extra-regs.xml: New files.
2007-02-09 05:00:36 +08:00
gdbarch_remote_register_number_ftype *remote_register_number;
gdbarch_fetch_tls_load_module_address_ftype *fetch_tls_load_module_address;
1999-07-20 07:30:11 +08:00
CORE_ADDR frame_args_skip;
gdbarch_unwind_pc_ftype *unwind_pc;
gdbarch_unwind_sp_ftype *unwind_sp;
1999-07-20 07:30:11 +08:00
gdbarch_frame_num_args_ftype *frame_num_args;
gdbarch_frame_align_ftype *frame_align;
gdbarch_stabs_argument_has_addr_ftype *stabs_argument_has_addr;
int frame_red_zone_size;
gdbarch_convert_from_func_ptr_addr_ftype *convert_from_func_ptr_addr;
2001-06-16 06:10:21 +08:00
gdbarch_addr_bits_remove_ftype *addr_bits_remove;
Clear non-significant bits of address on memory access ARMv8 supports tagged address, that is, the top one byte in address is ignored. It is always enabled on aarch64-linux. See https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt The tag in the tagged address is modeled as non-significant bits in address, so this patch adds a new gdbarch method significant_addr_bit and clear the non-significant bits (the top byte in ARMv8) of the virtual address at the point before passing address to target cache layer. IOW, the address used in the target cache layer is already cleared. Before this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: Cannot access memory at address 0xf000000000411030 After this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: 0x00000000 Note that I used address_significant in paddress, but it causes a regression gdb.base/long_long.exp, because gdb clears the non-significant bits in address, but test still expects them. p/a val.oct^M $24 = 0x2ee53977053977^M (gdb) FAIL: gdb.base/long_long.exp: p/a val.oct so I defer the change there. gdb: 2017-12-08 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_gdbarch_init): Install gdbarch significant_addr_bit. * gdbarch.sh (significant_addr_bit): New. * gdbarch.c, gdbarch.h: Re-generated. * target.c (memory_xfer_partial): Call address_significant. * utils.c (address_significant): New function. * utils.h (address_significant): Declare. 2017-12-08 Yao Qi <yao.qi@linaro.org> gdb/testsuite: * gdb.arch/aarch64-tagged-pointer.c: New file. * gdb.arch/aarch64-tagged-pointer.exp: New file.
2017-12-09 01:27:03 +08:00
int significant_addr_bit;
gdbarch_software_single_step_ftype *software_single_step;
gdbarch_single_step_through_delay_ftype *single_step_through_delay;
gdbarch_print_insn_ftype *print_insn;
gdbarch_skip_trampoline_code_ftype *skip_trampoline_code;
gdbarch_skip_solib_resolver_ftype *skip_solib_resolver;
gdbarch_in_solib_return_trampoline_ftype *in_solib_return_trampoline;
infrun: step through indirect branch thunks With version 7.3 GCC supports new options -mindirect-branch=<choice> -mfunction-return=<choice> The choices are: keep behaves as before thunk jumps through a thunk thunk-external jumps through an external thunk thunk-inline jumps through an inlined thunk For thunk and thunk-external, GDB would, on a call to the thunk, step into the thunk and then resume to its caller assuming that this is an undebuggable function. On a return thunk, GDB would stop inside the thunk. Make GDB step through such thunks instead. Before: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) 30 } After: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) inc (x=41) at gdb.base/step-indirect-call-thunk.c:23 23 return x + 1; This is independent of the step-mode. In order to step into the thunk, you would need to use stepi. When stepping over an indirect call thunk, GDB would first step through the thunk, then recognize that it stepped into a sub-routine and resume to the caller (of the thunk). Not sure whether this is worth optimizing. Thunk detection is implemented via gdbarch. I implemented the methods for IA. Other architectures may run into unexpected fails. The tests assume a fixed number of instruction steps to reach a thunk. This depends on the compiler as well as the architecture. They may need adjustments when we add support for more architectures. Or we can simply drop those tests that cover being able to step into thunks using instruction stepping. When using an older GCC, the tests will fail to build and will be reported as untested: Running .../gdb.base/step-indirect-call-thunk.exp ... gdb compile failed, \ gcc: error: unrecognized command line option '-mindirect-branch=thunk' gcc: error: unrecognized command line option '-mfunction-return=thunk' === gdb Summary === # of untested testcases 1 gdb/ * infrun.c (process_event_stop_test): Call gdbarch_in_indirect_branch_thunk. * gdbarch.sh (in_indirect_branch_thunk): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * x86-tdep.h: New. * x86-tdep.c: New. * Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o. (HFILES_NO_SRCDIR): Add x86-tdep.h. (ALLDEPFILES): Add x86-tdep.c. * arch-utils.h (default_in_indirect_branch_thunk): New. * arch-utils.c (default_in_indirect_branch_thunk): New. * i386-tdep: Include x86-tdep.h. (i386_in_indirect_branch_thunk): New. (i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch function. * amd64-tdep: Include x86-tdep.h. (amd64_in_indirect_branch_thunk): New. (amd64_init_abi): Set in_indirect_branch_thunk gdbarch function. testsuite/ * gdb.base/step-indirect-call-thunk.exp: New. * gdb.base/step-indirect-call-thunk.c: New. * gdb.reverse/step-indirect-call-thunk.exp: New. * gdb.reverse/step-indirect-call-thunk.c: New.
2018-02-14 21:30:57 +08:00
gdbarch_in_indirect_branch_thunk_ftype *in_indirect_branch_thunk;
gdbarch_stack_frame_destroyed_p_ftype *stack_frame_destroyed_p;
gdbarch_elf_make_msymbol_special_ftype *elf_make_msymbol_special;
gdbarch_coff_make_msymbol_special_ftype *coff_make_msymbol_special;
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
gdbarch_make_symbol_special_ftype *make_symbol_special;
gdbarch_adjust_dwarf2_addr_ftype *adjust_dwarf2_addr;
gdbarch_adjust_dwarf2_line_ftype *adjust_dwarf2_line;
int cannot_step_breakpoint;
int have_nonsteppable_watchpoint;
2002-10-17 04:50:22 +08:00
gdbarch_address_class_type_flags_ftype *address_class_type_flags;
gdbarch_address_class_type_flags_to_name_ftype *address_class_type_flags_to_name;
[gdbarch] New method "execute_dwarf_cfa_vendor_op" and migrate SPARC to it Recently a feature called "return address signing" has been added to GCC to prevent stack smash stack on AArch64. For details please refer: https://gcc.gnu.org/ml/gcc-patches/2017-01/msg00376.html GDB needs to be aware of this feature so it can restore the original return address which is critical for unwinding. On compiler side, whenever return address, i.e. LR register, is mangled or restored by hardware instruction, compiler is expected to generate a DW_CFA_AARCH64_negate_ra_state to toggle return address signing status. DW_CFA_AARCH64_negate_ra_state is using the same CFI number and therefore need to be multiplexed with DW_CFA_GNU_window_save which was designed for SPARC. A new gdbarch method "execute_dwarf_cfa_vendor_op" is introduced by this patch. It's parameters has been restricted to those only needed by SPARC and AArch64 for multiplexing DW_CFA_GNU_window_save which is a CFI operation takes none operand. Should any further DWARF CFI operation want to be multiplexed in the future, the parameter list can be extended. Below is the current function prototype. typedef int (gdbarch_execute_dwarf_cfa_vendor_op_ftype) (struct gdbarch *gdbarch, gdb_byte op, struct dwarf2_frame_state *fs); DW_CFA_GNU_window_save support for SPARC is migrated to this new gdbarch method by this patch. gdb/ * gdbarch.sh: New gdbarch method execute_dwarf_cfa_vendor_op. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * dwarf2-frame.c (dwarf2_frame_state_alloc_regs): Made the visibility external. (execute_cfa_program): Call execute_dwarf_cfa_vendor_op for CFI between DW_CFA_lo_user and DW_CFA_high_user inclusive. (enum cfa_how_kind): Move to ... (struct dwarf2_frame_state_reg_info): Likewise. (struct dwarf2_frame_state): Likewise. * dwarf2-frame.h: ... here. (dwarf2_frame_state_alloc_regs): New declaration. * sparc-tdep.c (sparc_execute_dwarf_cfa_vendor_op): New function. (sparc32_gdbarch_init): Register execute_dwarf_cfa_vendor_op hook.
2017-04-26 21:05:03 +08:00
gdbarch_execute_dwarf_cfa_vendor_op_ftype *execute_dwarf_cfa_vendor_op;
2002-10-17 04:50:22 +08:00
gdbarch_address_class_name_to_type_flags_ftype *address_class_name_to_type_flags;
gdbarch_register_reggroup_p_ftype *register_reggroup_p;
gdbarch_fetch_pointer_argument_ftype *fetch_pointer_argument;
Replace 'core_regset_sections' by iterator method The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator.
2014-09-04 23:26:43 +08:00
gdbarch_iterate_over_regset_sections_ftype *iterate_over_regset_sections;
* gdbarch.sh (make_corefile_notes): New architecture callback. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes before target_make_corefile_notes. If NULL is returned, the target does not support core file generation. * linux-nat.c: Include "linux-tdep.h". (find_signalled_thread, find_stop_signal): Remove. (linux_nat_do_thread_registers): Likewise. (struct linux_nat_corefile_thread_data): Likewise. (linux_nat_corefile_thread_callback): Likewise. (iterate_over_spus): Likewise. (struct linux_spu_corefile_data): Likewise. (linux_spu_corefile_callback): Likewise. (linux_spu_make_corefile_notes): Likewise. (linux_nat_collect_thread_registers): New function. (linux_nat_make_corefile_notes): Replace contents by call to linux_make_corefile_notes passing linux_nat_collect_thread_registers as native-only callback. * linux-tdep.h: Include "bfd.h". (struct regcache): Add forward declaration. (linux_collect_thread_registers_ftype): New typedef. (linux_make_corefile_notes): Add prototype. * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h", "regset.h", and "elf-bfd.h". (find_signalled_thread, find_stop_signal): New functions. (linux_spu_make_corefile_notes): Likewise. (linux_collect_thread_registers): Likewise. (struct linux_corefile_thread_data): New data structure. (linux_corefile_thread_callback): New funcion. (linux_make_corefile_notes): Likewise. (linux_make_corefile_notes_1): Likewise. (linux_init_abi): Install it.
2012-01-20 17:56:56 +08:00
gdbarch_make_corefile_notes_ftype *make_corefile_notes;
gdbarch_find_memory_regions_ftype *find_memory_regions;
gdbarch_core_xfer_shared_libraries_ftype *core_xfer_shared_libraries;
ppc-aix core file relocation. The current code attempts to provide relocation support when debugging core files via the rs6000_xfer_partial method of the rs6000-nat target_ops vector. However, this target_ops vector does not get pushed on the target stack at all when debugging core files, thus bypassing completely that part of the code. This patch fixes the problem by extending corelow's core_xfer_partial into handling the TARGET_OBJECT_LIBRARIES_AIX object. gdb/ChangeLog: * gdbarch.sh (core_xfer_shared_libraries_aix): New method. * gdbarch.h, gdbarch.c: Regenerate. * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX handling. * rs6000-aix-tdep.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h. * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and "xml-utils.h". (struct field_info, struct ld_info_desc): New types. (ld_info32_desc, ld_info64_desc): New static constants. (struct ld_info): New type. (rs6000_aix_extract_ld_info): New function. (rs6000_aix_shared_library_to_xml): Likewise. (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. (rs6000_aix_init_osabi): Add call to set_gdbarch_core_xfer_shared_libraries_aix. * rs6000-nat.c: Add "rs6000-aix-tdep.h" include. Remove "xml-utils.h" include. (LdInfo): Delete typedef. (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME): Delete macros. (rs6000_ptrace_ldinfo): Change return type to gdb_byte *. Adjust code accordingly. (rs6000_core_ldinfo): Delete, folded into rs6000_aix_core_xfer_shared_libraries_aix. (rs6000_xfer_shared_library): Delete. (rs6000_xfer_shared_libraries): Reimplement.
2013-05-15 20:26:14 +08:00
gdbarch_core_xfer_shared_libraries_aix_ftype *core_xfer_shared_libraries_aix;
* corelow.c (get_core_registers): Adjust. (core_file_thread_alive): Rename to... (core_thread_alive): ... this. (core_pid_to_str): Try gdbarch_core_pid_to_str first. (init_core_ops): Adjust. (coreops_suppress_target): Delete. (_initialize_corelow): Unconditionally add core_ops. * procfs.c: Include "inf-child.h". (procfs_ops): Delete. (init_procfs_ops): Delete. Reimplement as... (procfs_target): ... this, inheriting from inf-child. (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust. (procfs_prepare_to_store): Delete. (procfs_store_registers, procfs_resume): Adjust. (procfs_open): Delete. (procfs_suppress_run): Delete. (procfs_can_run): Delete. (procfs_mourn_inferior): Adjust. (procfs_init_inferior): Add target_ops parameter. Adjust. (procfs_create_inferior): Don't pass procfs_init_inferior to fork_inferior. Instead call it after fork_inferior returns. (procfs_find_new_threads): Adjust. (_initialize_procfs): Adjust to use procfs_target instead of init_procfs_ops. * sol-thread.c (orig_core_ops, sol_core_ops): Delete. (lwp_to_thread): Use target_thread_alive. (sol_thread_open): Delete. (sol_thread_attach): Delete. (sol_thread_detach, sol_thread_resume, sol_thread_wait) (sol_thread_fetch_registers, sol_thread_store_registers): Adjust to use find_target_beneath. (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete. (sol_thread_xfer_partial): Adjust to use find_target_beneath. (sol_thread_files_info, sol_thread_kill_inferior): Delete. (check_for_thread_db): New. (sol_thread_notice_signals, sol_thread_create_inferior): Delete. (sol_thread_new_objfile): Call check_for_thread_db. (sol_thread_mourn_inferior): Adjust to use find_target_beneath. (sol_thread_can_run): Delete. (sol_thread_alive): Adjust to use find_target_beneath. (sol_thread_stop): Delete. (rw_common): Use target_write_memory or target_read_memory. (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers. (ps_lsetregs, ps_lsetfpregs): Use target_store_registers. (solaris_pid_to_str): Remove check for libthread_db initialization failing. (sol_find_new_threads): Remove check for libthread_db initialization failing, or for an invalid inferior_ptid. Adjust to use find_target_beneath. (sol_core_open, sol_core_close, sol_core_detach, sol_core_files_info, sol_find_memory_regions, sol_make_note_section, ignore): Delete. (init_sol_thread_ops): Make it a thread_stratum target. Remove unneeded callback settings. (init_sol_core_ops): Delete. (_initialize_sol_thread): No longer call init_sol_core_ops, set procfs_suppress_run, or hack with core_ops. * target.h (struct target_ops): Add a target_ops * parameter to to_resume, to_fetch_registers, to_store_registers, to_thread_alive and to_find_new_threads. (target_fetch_registers, target_store_registers) (target_thread_alive, target_find_new_threads): Redeclare as function. * target.c (update_current_target): Do not inherit or de_fault to_resume, to_fetch_registers, to_store_registers, to_thread_alive, to_find_new_threads. (target_resume): Adjust. (target_thread_alive, target_find_new_threads): New. (debug_to_resume, debug_to_fetch_registers): Delete. (target_fetch_registers): New. (debug_to_store_registers): Delete. (target_store_registers): New. (debug_to_thread_alive, debug_to_find_new_threads): Delete. (setup_target_debug): Adjust. * gdbcore.h (core_ops): Delete declaration. * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c, inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c, i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c, hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c, nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c, alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c, bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c, hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c, ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c, m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c, mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c, ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c, shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c, vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes. * gdbarch.sh (core_pid_to_str): New gdbarch callback. * gdbarch.h, gdbarch.c: Regenerate. * sol2-tdep.c: Include "inferior.h". (sol2_core_pid_to_str): New. * sol2-tdep.h (sol2_core_pid_to_str): Declare. * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it. * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-23 08:03:50 +08:00
gdbarch_core_pid_to_str_ftype *core_pid_to_str;
gdbarch_core_thread_name_ftype *core_thread_name;
gdbarch_core_xfer_siginfo_ftype *core_xfer_siginfo;
const char * gcore_bfd_target;
* NEWS: Mention pointer to member improvements. * Makefile.in (gnu-v3-abi.o): Delete special rule. (eval.o, gnu-v3-abi.o, ia64-tdep.o): Update. * ada-valprint.c (ada_print_scalar): Update for new type codes. * c-typeprint.c (c_print_type): Update for new type codes. (c_type_print_varspec_prefix, c_type_print_varspec_suffix) (c_type_print_base): Likewise. (c_type_print_args): Rewrite. * c-valprint.c (c_val_print): Update for new type codes. Remove support for references to members. Treat methods like functions. * cp-abi.c (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New. * cp-abi.h (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New prototypes. (struct cp_abi_ops): Add corresponding members. * cp-valprint.c (cp_print_class_method): Delete. (cp_find_class_member): New function. (cp_print_class_member): Use it. Simplify support for bogus member pointers. * dwarf2read.c (quirk_gcc_member_function_pointer): Use lookup_methodptr_type. (read_tag_ptr_to_member_type): Likewise, and lookup_memberptr_type. * eval.c (evaluate_subexp_standard): Implement EVAL_SKIP for OP_SCOPE. Update call to value_aggregate_elt. Rewrite member pointer support. (evaluate_subexp_for_address): Handle OP_SCOPE explicitly. Handle references returned by user defined operators. * f-typeprint.c (f_print_type, f_type_print_varspec_prefix) (f_type_print_varspec_suffix): Remove support for member pointers. * gdbtypes.c (lookup_memberptr_type): Renamed from lookup_member_type and adjusted. (smash_to_memberptr_type): Likewise, from smash_to_member_type. (lookup_methodptr_type): New. (rank_one_type): Adjust for TYPE_CODE_MEMBERPTR. (recursive_dump_type): Update for new types. * gdbtypes.h (enum type_code): Replace TYPE_CODE_MEMBER with TYPE_CODE_MEMBERPTR and TYPE_CODE_METHODPTR. (lookup_memberptr_type, lookup_methodptr_type) (smash_to_memberptr_type): New prototypes. (smash_to_method_type): Formatting fix. (lookup_member_type, smash_to_member_type): Delete prototypes. * gnu-v3-abi.c (gnuv3_get_vtable, gnuv3_get_virtual_fn): New. Do not rely on debug information for the vptr or the method's enclosing type. Handle function descriptors for IA64. (gnuv3_virtual_fn_field): Rewrite using the new functions. (gnuv3_find_method_in, gnuv3_print_method_ptr) (gnuv3_method_ptr_size, gnuv3_make_method_ptr) (gnuv3_method_ptr_to_value): New. (init_gnuv3_ops): Set new members of gnu_v3_abi_ops. * hpread.c (hpread_type_lookup): Update for new types. * infcall.c (value_arg_coerce): Likewise. * m2-typeprint.c (m2_print_type): Remove explicit support for member pointers. * m2-valprint.c (m2_val_print): Likewise. * p-typeprint.c (pascal_type_print_varspec_prefix) (pascal_type_print_varspec_suffix, pascal_type_print_base): Likewise. * p-valprint.c (pascal_val_print): Likewise. (pascal_object_print_class_method, pascal_object_print_class_member): Delete. * p-lang.h (pascal_object_print_class_method) (pascal_object_print_class_member): Delete prototypes. * stabsread.c (read_type): Update for new types. * typeprint.c (print_type_scalar): Likewise. * valops.c (value_struct_elt_for_reference, value_namespace_elt) (value_maybe_namespace_elt, value_aggregate_elt): Add want_address argument. Construct a pointer to member if the address of a function or data member is requested. (value_cast_pointers): Don't modify the input value. (value_cast): Adjust pointer to member handling for new types. Allow null pointer to member constants. Don't modify the input value. (value_ind): Remove pointer to member check. Handle function descriptors for function pointers. (value_struct_elt, value_find_oload_method_list, check_field): Remove pointer to member checks. * value.c (unpack_long): Allow pointers to data members. (value_from_longest): Allow member pointers. * value.h (value_aggregate_elt): Add want_address. * varobj.c (c_variable_editable): Remove check for members. * gdbarch.sh: Add vtable_function_descriptors and vbit_in_delta. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Handle descriptors in virtual tables. (ia64_gdbarch_init): Call set_gdbarch_vtable_function_descriptors. * c-lang.h (cp_print_class_method): Delete prototype. * arm-tdep.c (arm_gdbarch_init): Call set_gdbarch_vbit_in_delta. * mips-tdep.c (mips_gdbarch_init): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * gdb.cp/classes.exp (test_pointers_to_class_members): Update expected output. Test the types of members and member pointers. * gdb.cp/inherit.exp (test_print_mi_member_types): Remove KFAILs for gdb/2092. * gdb.cp/member-ptr.exp: Search for a comment instead of a statement. Enable for GCC. Update expected output for some tests and add new tests. Remove obsolete GCC KFAILs. Allow GCC's class layout. * gdb.cp/member-ptr.cc (Padding, Padding::vspacer, Base, Base::get_x) (Base::vget_base, Left, Left::vget, Right, Right::vget, Diamond) (Diamond::vget_base): New. (main): Add new tests. * gdb.cp/printmethod.exp: Update expected output for member functions. * gdb.cp/virtfunc.exp (test_virtual_calls): Add a KFAIL for print pEe->D::vg().
2007-01-04 02:05:45 +08:00
int vtable_function_descriptors;
int vbit_in_delta;
gdbarch_skip_permanent_breakpoint_ftype *skip_permanent_breakpoint;
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
ULONGEST max_insn_length;
gdbarch_displaced_step_copy_insn_ftype *displaced_step_copy_insn;
gdbarch_displaced_step_hw_singlestep_ftype *displaced_step_hw_singlestep;
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
gdbarch_displaced_step_fixup_ftype *displaced_step_fixup;
gdbarch_displaced_step_location_ftype *displaced_step_location;
gdbarch_relocate_instruction_ftype *relocate_instruction;
gdbarch_overlay_update_ftype *overlay_update;
gdbarch_core_read_description_ftype *core_read_description;
gdbarch_static_transform_name_ftype *static_transform_name;
* gdbarch.sh (sofun_address_maybe_missing): New gdbarch variable. * gdbarch.c, gdbarch.h: Regenerate. * dbxread.c (find_stab_function_addr): Define unconditionally. (read_dbx_symtab): Use gdbarch_sofun_address_maybe_missing instead of SOFUN_ADDRESS_MAYBE_MISSING. (end_psymtab): Likewise. (process_one_symbol): Likewise. * mdebugread.c (parse_partial_symbols): Likewise. * symtab.h (struct minimal_symbol): Always define "filename" member. * elfread.c (elf_symtab_read): Use msym->filename unconditionally. * minsyms.c (lookup_minimal_symbol): Likewise. * symmisc.c (dump_msymbols): Likewise. * config/i386/i386sol2.mt (DEPRECATED_TM_FILE): Remove. * config/i386/linux.mt (DEPRECATED_TM_FILE): Remove. * config/i386/tm-i386sol2.h: Remove file. * config/i386/tm-linux.h: Remove file. * i386-linux-tdep.c (i386_linux_init_abi): Add call to set_gdbarch_sofun_address_maybe_missing. * i386-sol2-tdep.c (i386_sol2_init_abi): Likewise. * config/powerpc/linux.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/nbsd.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/ppc-eabi.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/ppc-sim.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/tm-ppc-eabi.h: Remove file. * rs6000-tdep.c (rs6000_gdbarch_init): Add call to set_gdbarch_sofun_address_maybe_missing. * config/sparc/sol2-64.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/sol2.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/tm-sol2.h: Remove file. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Add call to set_gdbarch_sofun_address_maybe_missing. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Likewise. doc/ChangeLog: * gdbarch.texi (Target Conditionals): Remove documentation of SOFUN_ADDRESS_MAYBE_MISSING, replaced by ... (Compiler Characteristics): ... documentation of set_gdbarch_sofun_address_maybe_missing.
2007-10-19 20:26:35 +08:00
int sofun_address_maybe_missing;
gdbarch_process_record_ftype *process_record;
gdbarch_process_record_signal_ftype *process_record_signal;
gdbarch_gdb_signal_from_target_ftype *gdb_signal_from_target;
This patch implements the new gdbarch method gdbarch_gdb_signal_to_target. It will be used when one wants to convert between the internal GDB signal representation (enum gdb_signal) and the target's representation. The idea of this patch came from a chat between Pedro and I on IRC, plus the discussion of my patches to add the new $_exitsignal convenience variable: <http://sourceware.org/ml/gdb-patches/2013-06/msg00452.html> <http://sourceware.org/ml/gdb-patches/2013-06/msg00352.html> What I did was to investigate, on the Linux kernel, which targets shared the signal numbers definition with the generic definition, present at <include/uapi/asm-generic/signal.h>. For the record, I used linux-3.10-rc7 as the main source of information, always looking at <arch/<ARCH_NAME>/include/uapi/asm/signal.h>. For SIGRTMAX (which defaults to _NSIG in most cases), I had to look at different signal-related files, but most of them (except MIPS) were defined to 64 anyway. Then, with all the differences in hand, I implemented the bits on each target. 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com> * linux-tdep.c: Define enum with generic signal numbers. (linux_gdb_signal_from_target): New function. (linux_gdb_signal_to_target): Likewise. (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target methods to the functions above. * linux-tdep.h (linux_gdb_signal_from_target): New prototype. (linux_gdb_signal_to_target): Likewise. * alpha-linux-tdep.c: Define new enum with signals different from generic Linux kernel. (alpha_linux_gdb_signal_from_target): New function. (alpha_linux_gdb_signal_to_target): Likewise. (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target with the functions mentioned above. * avr-tdep.c: Define enum with differences between Linux kernel and AVR signals. (avr_linux_gdb_signal_from_target): New function. (avr_linux_gdb_signal_to_target): Likewise. (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to the functions mentioned above. * sparc-linux-tdep.c: Define enum with differences between SPARC and generic Linux kernel signal numbers. (sparc32_linux_gdb_signal_from_target): New function. (sparc32_linux_gdb_signal_to_target): Likewise. (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target to the functions defined above. * xtensa-linux-tdep.c: Define enum with differences between Xtensa and Linux kernel generic signals. (xtensa_linux_gdb_signal_from_target): New function. (xtensa_linux_gdb_signal_to_target): Likewise. (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target to the functions defined above. * mips-linux-tdep.c: Define enum with differences between signals in MIPS and Linux kernel generic ones. (mips_gdb_signal_to_target): New function. (mips_gdb_signal_from_target): Redefine to use new enum, handle only different signals from the Linux kernel generic. (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target the functions defined above. * mips-linux-tdep.h (enum mips_signals): Remove.
2013-08-10 00:54:43 +08:00
gdbarch_gdb_signal_to_target_ftype *gdb_signal_to_target;
2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/ * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO. * infrun.c (siginfo_value_read, siginfo_value_write): New. (siginfo_value_funcs): New. (siginfo_make_value): New. (_initialize_infrun): Create the $_siginfo convenience variable. * gdbtypes.h (append_composite_type_field_aligned): Declare. * gdbtypes.c (append_composite_type_field): Rename to... (append_composite_type_field_aligned): ... this. Add ALIGNMENT argument. Handle it. (append_composite_type_field): Rewrite on top of append_composite_type_field_aligned. * value.h (internalvar_make_value): New typedef. (struct internalvar) <make_value>: New field. (create_internalvar_type_lazy): Declare. * value.c (create_internalvar): Clear make_value. (create_internalvar_type_lazy): New. (value_of_internalvar): If make_value is set use it. (preserve_values): Skip internal variables that don't have a value. * gdbarch.sh (get_siginfo_type): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.h, linux-tdep.c: New. * amd64-linux-tdep.c: Include "linux-tdep.h". (amd64_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * i386-linux-tdep.c: Include "linux-tdep.h". (i386_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * arm-linux-tdep.c: Include "linux-tdep.h". (i386_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * linux-nat.c (linux_xfer_siginfo): New. (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO. * remote.c (PACKET_qXfer_siginfo_read) (PACKET_qXfer_siginfo_write): New. (feature remote_protocol_features): Add "qXfer:siginfo:read" and "qXfer:siginfo:write" features. (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO. (_initialize_remote): Add "set/show remote read-siginfo-object" and "set/show remote write-siginfo-object" commands. * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o. (HFILES_NO_SRCDIR): Add linux-tdep.h. (ALLDEPFILES): Add linux-tdep.c. * configure.tgt (arm*-*-linux* | arm*-*-uclinux*) (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to gdb_target_obs. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/gdbserver/ * server.c (handle_query): Report qXfer:siginfo:read and qXfer:siginfo:write as supported and handle them. * target.h (struct target_ops) <qxfer_siginfo>: New field. * linux-low.c (linux_xfer_siginfo): New. (linux_target_ops): Set it. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/doc/ * gdb.texinfo (Signals): Document $_siginfo. (Convenience Variables): Mention $_siginfo. (Remote Configuration): Document qXfer:siginfo:read, qXfer:siginfo:write packets, and the read-siginfo-object, write-siginfo-object commands. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/testsuite/ * gdb.base/siginfo-obj.c, gdb.base/siginfo-obj.exp: New.
2009-02-07 06:59:01 +08:00
gdbarch_get_siginfo_type_ftype *get_siginfo_type;
gdbarch_record_special_symbol_ftype *record_special_symbol;
Implementing catch syscall. * amd64-linux-tdep.c: Include xml-syscall.h header, define the XML syscall name for the architecture. (amd64_linux_get_syscall_number): New function. (amd64_linux_init_abi): Register the correct functions for syscall catchpoint; set the correct syscall file name. * breakpoint.c: New include: xml-syscall.h. (set_raw_breakpoint_without_location): Setting the parameters for the catch syscall feature. (insert_catch_syscall): New. (remove_catch_syscall): New. (breakpoint_hit_catch_syscall): New. (print_it_catch_syscall): New. (print_one_catch_syscall): New. (print_mention_catch_syscall): New. (catch_syscall_breakpoint_ops): New. (syscall_catchpoint_p): New. (create_catchpoint_without_mention): New. (create_catchpoint): Modified in order to use create_catchpoint_without_mention. (create_syscall_event_catchpoint): New. (clean_up_filters): New. (catch_syscall_split_args): New. (catch_syscall_command_1): New. (delete_breakpoint): Add cleanup for catch syscall. (is_syscall_catchpoint_enabled): New. (catch_syscall_enabled): New. (catching_syscall_number): New. (catch_syscall_completer): New completer function. (add_catch_command): Add the completer function for catchpoints. * breakpoint.h (syscalls_to_be_caught): New vector. (catch_syscall_enabled): New. (catching_syscall_number): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * gdbarch.sh: Add syscall catchpoint functions and structures. (get_syscall_number): New. (UNKNOWN_SYSCALL): New definition. * i386-linux-nat.c (i386_linux_resume): Select the proper request to be made for ptrace() considering if we are catching syscalls or not. * i386-linux-tdep.c: Include xml-syscall.h header, define the XML syscall name for the architecture. (i386_linux_get_syscall_number): New. (i386_linux_init_abi): Register the correct functions for syscall catchpoint; set the correct syscall file name. * inf-child.c (inf_child_set_syscall_catchpoint): New. (inf_child_target): Assign default values to target_ops. * inf-ptrace.c (inf_ptrace_resume): Select the proper request to be made for ptrace() considering if we are catching syscalls or not. * inferior.h (struct inferior): Included new variables any_syscall_count, syscalls_counts and total_syscalls_count, used to keep track of requested syscall catchpoints. * infrun.c (resume): Add syscall catchpoint. (deal_with_syscall_event): New. (handle_inferior_event): Add syscall entry/return events. (inferior_has_called_syscall): New. * linux-nat.c: Define some helpful variables to track wether we have support for the needed ptrace option. (linux_test_for_tracesysgood): New. (linux_supports_tracesysgood): New. (linux_enable_tracesysgood): New. (linux_enable_event_reporting): Save the current used ptrace options. (linux_child_post_attach): Calling linux_enable_tracesysgood. (linux_child_post_startup_inferior): Likewise. (linux_child_set_syscall_catchpoint): New function. (linux_handle_extended_wait): Handle the case which the inferior stops because it has called or returned from a syscall. (linux_target_install_ops): Install the necessary functions to handle syscall catchpoints. * linux-nat.h (struct lwp_info): Include syscall_state into the structure, which indicates if we are in a syscall entry or return. * ppc-linux-tdep.c: Include xml-syscall.h header, define the XML syscall filename for the arch. (ppc_linux_get_syscall_number): New. (ppc_linux_init_abi): Register the correct functions for syscall catchpoint; setting the correct name for the XML syscall file. * target.c (update_current_target): Update/copy functions related to syscall catchpoint. (target_waitstatus_to_string): Add syscall catchpoint entry/return events. * target.h (struct target_waitstatus): Add syscall number. (struct syscall): New struct to hold information about syscalls in the system. (struct target_ops): Add ops for syscall catchpoint. (inferior_has_called_syscall): New. (target_set_syscall_catchpoint): New. * xml-support.c (xml_fetch_content_from_file): New function, transferred from xml-tdesc.c. * xml-support.h (xml_fetch_content_from_file): New. * xml-tdesc.c (fetch_xml_from_file): Function removed; transferred to xml-support.c. (file_read_description_xml): Updated to use the new xml_fetch_content_from_file function. * syscalls/gdb-syscalls.dtd: New definition file for syscall's XML support. * syscalls/amd64-linux.xml: New file containing information about syscalls for GNU/Linux systems that use amd64 architecture. * syscalls/i386-linux.xml: New file containing information about syscalls for GNU/Linux systems that use i386 architecture. * syscalls/ppc-linux.xml: New file containing information about syscalls for GNU/Linux systems that use PPC architecture. * syscalls/ppc64-linux.xml: New file containing information about syscalls for GNU/Linux systems that use PPC64 architecture. * xml-syscall.c: New file containing functions for manipulating syscall's XML files. * xml-syscall.h: New file, exporting the functions above mentioned. * Makefile.in: Support for relocatable GDB datadir and XML syscall. * NEWS: Added information about the catch syscall feature. * doc/gdb.texinfo (Set Catchpoints): Documentation about the new feature. * testsuite/Makefile.in: Inclusion of catch-syscall object. * testsuite/gdb.base/catch-syscall.c: New file. * testsuite/gdb.base/catch-syscall.exp: New file.
2009-09-15 11:30:08 +08:00
gdbarch_get_syscall_number_ftype *get_syscall_number;
Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead of global This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function.
2014-11-21 01:28:18 +08:00
const char * xml_syscall_file;
struct syscalls_info * syscalls_info;
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
const char *const * stap_integer_prefixes;
const char *const * stap_integer_suffixes;
const char *const * stap_register_prefixes;
const char *const * stap_register_suffixes;
const char *const * stap_register_indirection_prefixes;
const char *const * stap_register_indirection_suffixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
const char * stap_gdb_register_prefix;
const char * stap_gdb_register_suffix;
gdbarch_stap_is_single_operand_ftype *stap_is_single_operand;
gdbarch_stap_parse_special_token_ftype *stap_parse_special_token;
gdbarch_dtrace_parse_probe_argument_ftype *dtrace_parse_probe_argument;
gdbarch_dtrace_probe_is_enabled_ftype *dtrace_probe_is_enabled;
gdbarch_dtrace_enable_probe_ftype *dtrace_enable_probe;
gdbarch_dtrace_disable_probe_ftype *dtrace_disable_probe;
int has_global_solist;
int has_global_breakpoints;
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 17:51:43 +08:00
gdbarch_has_shared_address_space_ftype *has_shared_address_space;
Add fast tracepoints. * arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-06 12:20:27 +08:00
gdbarch_fast_tracepoint_valid_at_ftype *fast_tracepoint_valid_at;
gdbarch_guess_tracepoint_registers_ftype *guess_tracepoint_registers;
gdb 2010-03-05 Corinna Vinschen <vinschen@redhat.com> Tom Tromey <tromey@redhat.com> * utils.c (host_char_to_target): Add 'gdbarch' argument. (parse_escape): Likewise. * python/py-utils.c (unicode_to_target_string): Update. (unicode_to_target_python_string): Update. (target_string_to_unicode): Update. * printcmd.c (printf_command): Update. * p-exp.y (yylex): Update. * objc-exp.y (yylex): Update. * mi/mi-parse.c: Include charset.h. (mi_parse_escape): New function. (mi_parse_argv): Use it. * jv-exp.y (yylex): Update. * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New function. (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset. * gdbarch.sh (auto_charset, auto_wide_charset): New. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * defs.h (parse_escape): Update. * cli/cli-setshow.c: Include arch-utils.h. (do_setshow_command): Update. * cli/cli-cmds.c (echo_command): Update. * charset.h (target_charset, target_wide_charset): Update. * charset.c: Include arch-utils.h. (target_charset_name): Default to "auto". (target_wide_charset_name): Likewise. (show_target_charset_name): Handle "auto". (show_target_wide_charset_name): Likewise. (be_le_arch): New global. (set_be_le_names): Add 'gdbarch' argument. (validate): Likewise. Don't call set_be_le_names. (set_charset_sfunc, set_host_charset_sfunc) (set_target_charset_sfunc, set_target_wide_charset_sfunc): Update. (target_charset): Add 'gdbarch' argument. (target_wide_charset): Likewise. Remove 'byte_order' argument. (auto_target_charset_name): New global. (default_auto_charset, default_auto_wide_charset): New functions. (_initialize_charset): Set auto_target_charset_name. Allow "auto" for target charsets. Copy result of nl_langinfo. Use GetACP if USE_WIN32API. * c-lang.c (charset_for_string_type): Add 'gdbarch' argument, remove 'byte_order' argument. Update. (classify_type): Likewise. (c_emit_char): Update. (c_printchar): Update. (c_printstr): Update. (c_get_string): Update. (evaluate_subexp_c): Update. * arch-utils.h (default_auto_charset, default_auto_wide_charset): Declare. * python/python.c (gdbpy_target_charset): New function. (gdbpy_target_wide_charset): Likewise. (GdbMethods): Update. * NEWS: Update. gdb/doc * gdb.texinfo (Basic Python): Document target_charset and target_wide_charset. gdb/testsuite * gdb.python/py-prettyprint.py (pp_nullstr.to_string): Use gdb.target_charset. (pp_ns.to_string): Likewise.
2010-03-06 04:18:19 +08:00
gdbarch_auto_charset_ftype *auto_charset;
gdbarch_auto_wide_charset_ftype *auto_wide_charset;
const char * solib_symbols_extension;
int has_dos_based_file_system;
gdbarch_gen_return_address_ftype *gen_return_address;
gdbarch_info_proc_ftype *info_proc;
gdbarch_core_info_proc_ftype *core_info_proc;
New "iterate_over_objfiles_in_search_order" gdbarch method. This patch introduces the "iterate_over_objfiles_in_search_order" gdbarch method, as well as its default implementation, and converts the areas where it will matter to using this gdbarch method. The default method implementation is the only one installed, and the changes should have no functional impact in terms of behavior. This only paves the way for the architectures that will need their own version. gdb/ChangeLog: * gdbarch.sh: Add generation of "iterate_over_objfiles_in_search_order_cb_ftype" typedef in gdbarch.h. Add include of "objfiles.h" in gdbarch.c. (iterate_over_objfiles_in_search_order): New gdbarch method. * gdbarch.h, gdbarch.c: Regenerate. * objfiles.h (default_iterate_over_objfiles_in_search_order): Add declaration. * objfiles.c (default_iterate_over_objfiles_in_search_order): New function. * symtab.c (lookup_symbol_aux_objfile): New function, extracted out of lookup_symbol_aux_symtabs. (lookup_symbol_aux_symtabs): Replace extracted-out code by call to lookup_symbol_aux_objfile. (struct global_sym_lookup_data): New type. (lookup_symbol_global_iterator_cb): New function. (lookup_symbol_global): Search for symbol using gdbarch_iterate_over_objfiles_in_search_order and lookup_symbol_global_iterator_cb. * findvar.c (struct minsym_lookup_data): New type. (minsym_lookup_iterator_cb): New function. (default_read_var_value) [case LOC_UNRESOLVED]: Resolve the symbol's address via gdbarch_iterate_over_objfiles_in_search_order and minsym_lookup_iterator_cb.
2012-06-05 21:50:50 +08:00
gdbarch_iterate_over_objfiles_in_search_order_ftype *iterate_over_objfiles_in_search_order;
struct ravenscar_arch_ops * ravenscar_ops;
gdbarch_insn_is_call_ftype *insn_is_call;
gdbarch_insn_is_ret_ftype *insn_is_ret;
gdbarch_insn_is_jump_ftype *insn_is_jump;
gdbarch_auxv_parse_ftype *auxv_parse;
gdbarch_print_auxv_entry_ftype *print_auxv_entry;
gdbarch_vsyscall_range_ftype *vsyscall_range;
gdbarch_infcall_mmap_ftype *infcall_mmap;
compile: Use also inferior munmap Currently inferior memory is allocated by inferior mmap() but it is never deallocated; despite the injected objfile incl. its symbols is freed. This was intentional so that one can do for example: inferior: char *str = "foo"; GDB: (gdb) compile code str = "bar"; I believe later patches will be needed to introduce full control over keeping vs. discarding the injected module as being discussed in: compile: objfiles lifetime UI https://sourceware.org/ml/gdb/2015-04/msg00051.html Message-ID: <20150429135735.GA16974@host1.jankratochvil.net> https://sourceware.org/ml/gdb/2015-05/msg00007.html As decided by Phil it is better not to leak inferior pages as users can workaround the issue above for example by: (gdb) compile code str = strdup ("bar"); I have checked that in fact gdb/doc/ (written by Phil) already expects the injected code will be unmapped so that does not need to be changed: compile code int ff = 5; p = &ff; In this example, @code{p} would point to @code{ff} when the @code{compile} command is executing the source code provided to it. However, as variables in the (example) program persist with their assigned values, the variable @code{p} would point to an invalid location when the command exists. gdb/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * arch-utils.c (default_infcall_munmap): New. * arch-utils.h (default_infcall_munmap): New declaration. * compile/compile-object-load.c (struct munmap_list, munmap_list_add) (munmap_list_free, munmap_listp_free_cleanup): New. (struct setup_sections_data): Add field munmap_list_headp. (setup_sections): Call munmap_list_add. (compile_object_load): New variable munmap_list_head, initialize setup_sections_data.munmap_list_headp, return munmap_list_head. * compile/compile-object-load.h (struct munmap_list): New declaration. (struct compile_module): Add field munmap_list_head. (munmap_list_free): New declaration. * compile/compile-object-run.c (struct do_module_cleanup): Add field munmap_list_head. (do_module_cleanup): Call munmap_list_free. (compile_object_run): Pass munmap_list_head to do_module_cleanup. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (infcall_munmap): New. * linux-tdep.c (linux_infcall_munmap): New. (linux_init_abi): Install it. gdb/testsuite/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.compile/compile.exp (keep jit in memory): Rename to ... (do not keep jit in memory): ... this. (expect 5): Change it to ... (expect no 5): ... this.
2015-06-04 03:22:56 +08:00
gdbarch_infcall_munmap_ftype *infcall_munmap;
gdbarch_gcc_target_options_ftype *gcc_target_options;
add gnu_triplet_regexp gdbarch method gdb has to inform libcc1.so of the target being used, so that the correct compiler can be invoked. The compiler is invoked using the GNU configury triplet prefix, e.g., "x86_64-unknown-linux-gnu-gcc". In order for this to work we need to map the gdbarch to the GNU configury triplet arch. In most cases these are identical; however, the x86 family poses some problems, as the BFD arch names are quite different from the GNU triplet names. So, we introduce a new gdbarch method for this. A regular expression is used because there are various valid values for the arch prefix in the triplet. This patch also updates the osabi code to associate a regular expression with the OS ABI. I have only added a concrete value for Linux. Note that the "-gnu" part is optional, at least on Fedora it is omitted from the installed GCC executable's name. gdb/ChangeLog 2014-12-12 Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * osabi.h (osabi_triplet_regexp): Declare. * osabi.c (struct osabi_names): New. (gdb_osabi_names): Change type to struct osabi_names. Update values. (gdbarch_osabi_name): Update. (osabi_triplet_regexp): New function. (osabi_from_tdesc_string, _initialize_gdb_osabi): Update. * i386-tdep.c (i386_gnu_triplet_regexp): New method. (i386_elf_init_abi, i386_go32_init_abi, i386_gdbarch_init): Call set_gdbarch_gnu_triplet_regexp. * gdbarch.sh (gnu_triplet_regexp): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_gnu_triplet_regexp): Declare. * arch-utils.c (default_gnu_triplet_regexp): New function.
2014-06-13 23:28:24 +08:00
gdbarch_gnu_triplet_regexp_ftype *gnu_triplet_regexp;
gdbarch_addressable_memory_unit_size_ftype *addressable_memory_unit_size;
GDB: Add support for the new set/show disassembler-options commands. This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-03-01 02:32:07 +08:00
char ** disassembler_options;
const disasm_options_t * valid_disassembler_options;
gdbarch_type_align_ftype *type_align;
1999-07-20 07:30:11 +08:00
};
1999-06-15 02:08:47 +08:00
2000-08-11 10:55:38 +08:00
/* Create a new ``struct gdbarch'' based on information provided by
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
``struct gdbarch_info''. */
1999-06-15 02:08:47 +08:00
struct gdbarch *
1999-08-31 09:14:27 +08:00
gdbarch_alloc (const struct gdbarch_info *info,
struct gdbarch_tdep *tdep)
1999-06-15 02:08:47 +08:00
{
struct gdbarch *gdbarch;
/* Create an obstack for allocating all the per-architecture memory,
then use that to allocate the architecture vector. */
replace XMALLOC with XNEW This replaces XMALLOC with XNEW, and removes XMALLOC. The only non-mechanical bit here was remembering to edit gdbarch.sh. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise.
2013-12-29 06:31:23 +08:00
struct obstack *obstack = XNEW (struct obstack);
obstack_init (obstack);
Replace some xmalloc-family functions with XNEW-family ones This patch is part of the make-gdb-buildable-in-C++ effort. The idea is to change some calls to the xmalloc family of functions to calls to the equivalents in the XNEW family. This avoids adding an explicit cast, so it keeps the code a bit more readable. Some of them also map relatively well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be possible to do scripted replacements if needed. I only changed calls that were obviously allocating memory for one or multiple "objects". Allocation of variable sizes (such as strings or buffer handling) will be for later (and won't use XNEW). - xmalloc (sizeof (struct foo)) -> XNEW (struct foo) - xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num) - xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo) - xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num) - xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num) - obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo) - obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num) - alloca (sizeof (struct foo)) -> XALLOCA (struct foo) - alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num) Some instances of xmalloc followed by memset to zero the buffer were replaced by XCNEW or XCNEWVEC. I regtested on x86-64, Ubuntu 14.04, but the patch touches many architecture-specific files. For those I'll have to rely on the buildbot or people complaining that I broke their gdb. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_add_process): Likewise. * aarch64-tdep.c (aarch64_gdbarch_init): Likewise. * ada-exp.y (write_ambiguous_var): Likewise. * ada-lang.c (resolve_subexp): Likewise. (user_select_syms): Likewise. (assign_aggregate): Likewise. (ada_evaluate_subexp): Likewise. (cache_symbol): Likewise. * addrmap.c (allocate_key): Likewise. (addrmap_create_mutable): Likewise. * aix-thread.c (sync_threadlists): Likewise. * alpha-tdep.c (alpha_push_dummy_call): Likewise. (alpha_gdbarch_init): Likewise. * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise. * arm-linux-nat.c (arm_linux_add_process): Likewise. * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise. * arm-tdep.c (push_stack_item): Likewise. (arm_displaced_step_copy_insn): Likewise. (arm_gdbarch_init): Likewise. (_initialize_arm_tdep): Likewise. * avr-tdep.c (push_stack_item): Likewise. * ax-general.c (new_agent_expr): Likewise. * block.c (block_initialize_namespace): Likewise. * breakpoint.c (alloc_counted_command_line): Likewise. (update_dprintf_command_list): Likewise. (parse_breakpoint_sals): Likewise. (decode_static_tracepoint_spec): Likewise. (until_break_command): Likewise. (clear_command): Likewise. (update_global_location_list): Likewise. (get_breakpoint_objfile_data) Likewise. * btrace.c (ftrace_new_function): Likewise. (btrace_set_insn_history): Likewise. (btrace_set_call_history): Likewise. * buildsym.c (add_symbol_to_list): Likewise. (record_pending_block): Likewise. (start_subfile): Likewise. (start_buildsym_compunit): Likewise. (push_subfile): Likewise. (end_symtab_get_static_block): Likewise. (buildsym_init): Likewise. * cli/cli-cmds.c (source_command): Likewise. * cli/cli-decode.c (add_cmd): Likewise. * cli/cli-script.c (build_command_line): Likewise. (setup_user_args): Likewise. (realloc_body_list): Likewise. (process_next_line): Likewise. (copy_command_lines): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (read_pe_exported_syms): Likewise. * coffread.c (coff_locate_sections): Likewise. (coff_symtab_read): Likewise. (coff_read_struct_type): Likewise. * common/cleanups.c (make_my_cleanup2): Likewise. * common/common-exceptions.c (throw_it): Likewise. * common/filestuff.c (make_cleanup_close): Likewise. * common/format.c (parse_format_string): Likewise. * common/queue.h (DEFINE_QUEUE_P): Likewise. * compile/compile-object-load.c (munmap_list_add): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (append_args): Likewise. * corefile.c (specify_exec_file_hook): Likewise. * cp-support.c (make_symbol_overload_list): Likewise. * cris-tdep.c (push_stack_item): Likewise. (cris_gdbarch_init): Likewise. * ctf.c (ctf_trace_file_writer_new): Likewise. * dbxread.c (init_header_files): Likewise. (add_new_header_file): Likewise. (init_bincl_list): Likewise. (dbx_end_psymtab): Likewise. (start_psymtab): Likewise. (dbx_end_psymtab): Likewise. * dcache.c (dcache_init): Likewise. * dictionary.c (dict_create_hashed): Likewise. (dict_create_hashed_expandable): Likewise. (dict_create_linear): Likewise. (dict_create_linear_expandable): Likewise. * dtrace-probe.c (dtrace_process_dof_probe): Likewise. * dummy-frame.c (register_dummy_frame_dtor): Likewise. * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise. * dwarf2-frame.c (dwarf2_build_frame_info): Likewise. (decode_frame_entry_1): Likewise. * dwarf2expr.c (new_dwarf_expr_context): Likewise. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise. * dwarf2read.c (dwarf2_has_info): Likewise. (create_signatured_type_table_from_index): Likewise. (dwarf2_read_index): Likewise. (dw2_get_file_names_reader): Likewise. (create_all_type_units): Likewise. (read_cutu_die_from_dwo): Likewise. (init_tu_and_read_dwo_dies): Likewise. (init_cutu_and_read_dies): Likewise. (create_all_comp_units): Likewise. (queue_comp_unit): Likewise. (inherit_abstract_dies): Likewise. (read_call_site_scope): Likewise. (dwarf2_add_field): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (attr_to_dynamic_prop): Likewise. (abbrev_table_alloc_abbrev): Likewise. (abbrev_table_read_table): Likewise. (add_include_dir): Likewise. (add_file_name): Likewise. (dwarf_decode_line_header): Likewise. (dwarf2_const_value_attr): Likewise. (dwarf_alloc_block): Likewise. (parse_macro_definition): Likewise. (set_die_type): Likewise. (write_psymtabs_to_index): Likewise. (create_cus_from_index): Likewise. (dwarf2_create_include_psymtab): Likewise. (process_psymtab_comp_unit_reader): Likewise. (build_type_psymtab_dependencies): Likewise. (read_comp_units_from_section): Likewise. (compute_compunit_symtab_includes): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (load_partial_dies): Likewise. (dwarf2_symbol_mark_computed): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_read_minimal_symbols): Likewise. * environ.c (make_environ): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * event-loop.c (create_file_handler): Likewise. (create_async_signal_handler): Likewise. (create_async_event_handler): Likewise. (create_timer): Likewise. * exec.c (build_section_table): Likewise. * fbsd-nat.c (fbsd_remember_child): Likewise. * fork-child.c (fork_inferior): Likewise. * frv-tdep.c (new_variant): Likewise. * gdbarch.sh (gdbarch_alloc): Likewise. (append_name): Likewise. * gdbtypes.c (rank_function): Likewise. (copy_type_recursive): Likewise. (add_dyn_prop): Likewise. * gnu-nat.c (make_proc): Likewise. (make_inf): Likewise. (gnu_write_inferior): Likewise. * gnu-v3-abi.c (build_gdb_vtable_type): Likewise. (build_std_type_info_type): Likewise. * guile/scm-param.c (compute_enum_list): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * guile/scm-value.c (gdbscm_value_call): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise. (read_unwind_info): Likewise. * ia64-tdep.c (ia64_gdbarch_init): Likewise. * infcall.c (dummy_frame_context_saver_setup): Likewise. (call_function_by_hand_dummy): Likewise. * infcmd.c (step_once): Likewise. (finish_forward): Likewise. (attach_command): Likewise. (notice_new_inferior): Likewise. * inferior.c (add_inferior_silent): Likewise. * infrun.c (add_displaced_stepping_state): Likewise. (save_infcall_control_state): Likewise. (save_inferior_ptid): Likewise. (_initialize_infrun): Likewise. * jit.c (bfd_open_from_target_memory): Likewise. (jit_gdbarch_data_init): Likewise. * language.c (add_language): Likewise. * linespec.c (decode_line_2): Likewise. * linux-nat.c (add_to_pid_list): Likewise. (add_initial_lwp): Likewise. * linux-thread-db.c (add_thread_db_info): Likewise. (record_thread): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_analyze_prologue): Likewise. * macrocmd.c (macro_define_command): Likewise. * macroexp.c (gather_arguments): Likewise. * macroscope.c (sal_macro_scope): Likewise. * macrotab.c (new_macro_table): Likewise. * mdebugread.c (push_parse_stack): Likewise. (parse_partial_symbols): Likewise. (parse_symbol): Likewise. (psymtab_to_symtab_1): Likewise. (new_block): Likewise. (new_psymtab): Likewise. (mdebug_build_psymtabs): Likewise. (add_pending): Likewise. (elfmdebug_build_psymtabs): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * mi/mi-main.c (mi_execute_command): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (terminate_minimal_symbol_table): Likewise. * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise. * nat/linux-btrace.c (linux_enable_bts): Likewise. (linux_enable_pt): Likewise. * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise. (linux_xfer_osdata_processgroups): Likewise. * nios2-tdep.c (nios2_gdbarch_init): Likewise. * nto-procfs.c (procfs_meminfo): Likewise. * objc-lang.c (start_msglist): Likewise. (selectors_info): Likewise. (classes_info): Likewise. (find_methods): Likewise. * objfiles.c (allocate_objfile): Likewise. (update_section_map): Likewise. * osabi.c (gdbarch_register_osabi): Likewise. (gdbarch_register_osabi_sniffer): Likewise. * parse.c (start_arglist): Likewise. * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise. (hwdebug_insert_point): Likewise. * printcmd.c (display_command): Likewise. (ui_printf): Likewise. * procfs.c (create_procinfo): Likewise. (load_syscalls): Likewise. (proc_get_LDT_entry): Likewise. (proc_update_threads): Likewise. * prologue-value.c (make_pv_area): Likewise. (pv_area_store): Likewise. * psymtab.c (extend_psymbol_list): Likewise. (init_psymbol_list): Likewise. (allocate_psymtab): Likewise. * python/py-inferior.c (add_thread_object): Likewise. * python/py-param.c (compute_enum_values): Likewise. * python/py-value.c (valpy_call): Likewise. * python/py-varobj.c (py_varobj_iter_next): Likewise. * python/python.c (ensure_python_env): Likewise. * record-btrace.c (record_btrace_start_replaying): Likewise. * record-full.c (record_full_reg_alloc): Likewise. (record_full_mem_alloc): Likewise. (record_full_end_alloc): Likewise. (record_full_core_xfer_partial): Likewise. * regcache.c (get_thread_arch_aspace_regcache): Likewise. * remote-fileio.c (remote_fileio_init_fd_map): Likewise. * remote-notif.c (remote_notif_state_allocate): Likewise. * remote.c (demand_private_info): Likewise. (remote_notif_stop_alloc_reply): Likewise. (remote_enable_btrace): Likewise. * reverse.c (save_bookmark_command): Likewise. * rl78-tdep.c (rl78_gdbarch_init): Likewise. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. * ser-go32.c (dos_get_tty_state): Likewise. (dos_copy_tty_state): Likewise. * ser-mingw.c (ser_windows_open): Likewise. (ser_console_wait_handle): Likewise. (ser_console_get_tty_state): Likewise. (make_pipe_state): Likewise. (net_windows_open): Likewise. * ser-unix.c (hardwire_get_tty_state): Likewise. (hardwire_copy_tty_state): Likewise. * solib-aix.c (solib_aix_new_lm_info): Likewise. * solib-dsbt.c (dsbt_current_sos): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (frv_current_sos): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_bfd_fopen): Likewise. * solib-svr4.c (lm_info_read): Likewise. (svr4_copy_library_list): Likewise. (svr4_default_sos): Likewise. * source.c (find_source_lines): Likewise. (line_info): Likewise. (add_substitute_path_rule): Likewise. * spu-linux-nat.c (spu_bfd_open): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stabsread.c (dbx_lookup_type): Likewise. (read_type): Likewise. (read_member_functions): Likewise. (read_struct_fields): Likewise. (read_baseclasses): Likewise. (read_args): Likewise. (_initialize_stabsread): Likewise. * stack.c (func_command): Likewise. * stap-probe.c (handle_stap_probe): Likewise. * symfile.c (addrs_section_sort): Likewise. (addr_info_make_relative): Likewise. (load_section_callback): Likewise. (add_symbol_file_command): Likewise. (init_filename_language_table): Likewise. * symtab.c (create_filename_seen_cache): Likewise. (sort_search_symbols_remove_dups): Likewise. (search_symbols): Likewise. * target.c (make_cleanup_restore_target_terminal): Likewise. * thread.c (new_thread): Likewise. (enable_thread_stack_temporaries): Likewise. (make_cleanup_restore_current_thread): Likewise. (thread_apply_all_command): Likewise. * tic6x-tdep.c (tic6x_gdbarch_init): Likewise. * top.c (gdb_readline_wrapper): Likewise. * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise. * tracepoint.c (trace_find_line_command): Likewise. (all_tracepoint_actions_and_cleanup): Likewise. (make_cleanup_restore_current_traceframe): Likewise. (get_uploaded_tp): Likewise. (get_uploaded_tsv): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_alloc_content): Likewise. (tui_add_content_elements): Likewise. * tui/tui-disasm.c (tui_find_disassembly_address): Likewise. (tui_set_disassem_content): Likewise. * ui-file.c (ui_file_new): Likewise. (stdio_file_new): Likewise. (tee_file_new): Likewise. * utils.c (make_cleanup_restore_integer): Likewise. (add_internal_problem_command): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * valops.c (find_oload_champ): Likewise. * value.c (allocate_value_lazy): Likewise. (record_latest_value): Likewise. (create_internalvar): Likewise. * varobj.c (install_variable): Likewise. (new_variable): Likewise. (new_root_variable): Likewise. (cppush): Likewise. (_initialize_varobj): Likewise. * windows-nat.c (windows_make_so): Likewise. * x86-nat.c (x86_add_process): Likewise. * xcoffread.c (arrange_linetable): Likewise. (allocate_include_entry): Likewise. (process_linenos): Likewise. (SYMBOL_DUP): Likewise. (xcoff_start_psymtab): Likewise. (xcoff_end_psymtab): Likewise. * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise. * xtensa-tdep.c (xtensa_register_type): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Likewise. (compile_bytecodes): Likewise. * dll.c (loaded_dll): Likewise. * event-loop.c (append_callback_event): Likewise. (create_file_handler): Likewise. (create_file_event): Likewise. * hostio.c (handle_open): Likewise. * inferiors.c (add_thread): Likewise. (add_process): Likewise. * linux-aarch64-low.c (aarch64_linux_new_process): Likewise. * linux-arm-low.c (arm_new_process): Likewise. (arm_new_thread): Likewise. * linux-low.c (add_to_pid_list): Likewise. (linux_add_process): Likewise. (handle_extended_wait): Likewise. (add_lwp): Likewise. (enqueue_one_deferred_signal): Likewise. (enqueue_pending_signal): Likewise. (linux_resume_one_lwp_throw): Likewise. (linux_resume_one_thread): Likewise. (linux_read_memory): Likewise. (linux_write_memory): Likewise. * linux-mips-low.c (mips_linux_new_process): Likewise. (mips_linux_new_thread): Likewise. (mips_add_watchpoint): Likewise. * linux-x86-low.c (initialize_low_arch): Likewise. * lynx-low.c (lynx_add_process): Likewise. * mem-break.c (set_raw_breakpoint_at): Likewise. (set_breakpoint): Likewise. (add_condition_to_breakpoint): Likewise. (add_commands_to_breakpoint): Likewise. (clone_agent_expr): Likewise. (clone_one_breakpoint): Likewise. * regcache.c (new_register_cache): Likewise. * remote-utils.c (look_up_one_symbol): Likewise. * server.c (queue_stop_reply): Likewise. (start_inferior): Likewise. (queue_stop_reply_callback): Likewise. (handle_target_event): Likewise. * spu-low.c (fetch_ppc_memory): Likewise. (store_ppc_memory): Likewise. * target.c (set_target_ops): Likewise. * thread-db.c (thread_db_load_search): Likewise. (try_thread_db_load_1): Likewise. * tracepoint.c (add_tracepoint): Likewise. (add_tracepoint_action): Likewise. (create_trace_state_variable): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtro): Likewise. (add_while_stepping_state): Likewise. * win32-low.c (child_add_thread): Likewise. (get_image_name): Likewise.
2015-08-27 05:16:07 +08:00
gdbarch = XOBNEW (obstack, struct gdbarch);
memset (gdbarch, 0, sizeof (*gdbarch));
gdbarch->obstack = obstack;
1999-06-15 02:08:47 +08:00
alloc_gdbarch_data (gdbarch);
gdbarch->tdep = tdep;
1999-06-15 02:08:47 +08:00
gdbarch->bfd_arch_info = info->bfd_arch_info;
gdbarch->byte_order = info->byte_order;
gdbarch->byte_order_for_code = info->byte_order_for_code;
gdbarch->osabi = info->osabi;
gdbarch->target_desc = info->target_desc;
1999-06-15 02:08:47 +08:00
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Force the explicit initialization of these. */
gdbarch->bits_big_endian = (gdbarch->byte_order == BFD_ENDIAN_BIG);
gdbarch->short_bit = 2*TARGET_CHAR_BIT;
gdbarch->int_bit = 4*TARGET_CHAR_BIT;
gdbarch->long_bit = 4*TARGET_CHAR_BIT;
gdbarch->long_long_bit = 2*gdbarch->long_bit;
gdbarch->half_bit = 2*TARGET_CHAR_BIT;
gdbarch->float_bit = 4*TARGET_CHAR_BIT;
gdbarch->double_bit = 8*TARGET_CHAR_BIT;
gdbarch->long_double_bit = 8*TARGET_CHAR_BIT;
Teach GDB that wchar_t is a built-in type in C++ mode GDB is currently not aware that wchar_t is a built-in type in C++ mode. This is usually not a problem because the debug info describes the type, so when you have a program loaded, you don't notice this. However, if you try expressions involving wchar_t before a program is loaded, gdb errors out: (gdb) p (wchar_t)-1 No symbol table is loaded. Use the "file" command. (gdb) p L"hello" No type named wchar_t. (gdb) ptype L"hello" No type named wchar_t. This commit teaches gdb about the type. After: (gdb) p (wchar_t)-1 $1 = -1 L'\xffffffff' (gdb) p L"hello" $2 = L"hello" (gdb) ptype L"hello" type = wchar_t [6] Unlike char16_t/char32_t, unfortunately, the underlying type of wchar_t is implementation dependent, both size and signness. So this requires adding a couple new gdbarch hooks. I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it seems to me that the majority of the ABIs have a 4-byte signed wchar_t, so that's what I made the default for GDB too. And then I looked for which ports have a 16-bit and/or unsigned wchar_t, and made GDB follow suit. gdb/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>: New enum value. (cplus_language_arch_info): Register cplus_primitive_type_wchar_t. * gdbtypes.h (struct builtin_type) <builtin_wchar>: New field. * gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type. * gdbarch.sh (wchar_bit, wchar_signed): New per-arch values. * gdbarch.h, gdbarch.c: Regenerate. * aarch64-tdep.c (aarch64_gdbarch_init): Override gdbarch_wchar_bit and gdbarch_wchar_signed. * alpha-tdep.c (alpha_gdbarch_init): Likewise. * arm-tdep.c (arm_gdbarch_init): Likewise. * avr-tdep.c (avr_gdbarch_init): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * i386-nto-tdep.c (i386nto_init_abi): Likewise. * i386-tdep.c (i386_go32_init_abi): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * sparc64-tdep.c (sparc64_init_abi): Likewise. * windows-tdep.c (windows_init_abi): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. gdb/testsuite/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * gdb.cp/wide_char_types.c: Include <wchar.h>. (wchar): New global. * gdb.cp/wide_char_types.exp (wide_char_types_program) (do_test_wide_char, wide_char_types_no_program, top level): Add wchar_t testing.
2017-04-12 21:00:49 +08:00
gdbarch->wchar_bit = 4*TARGET_CHAR_BIT;
gdbarch->wchar_signed = -1;
Add gdbarch callback to provide formats for debug info float types At this point, all TYPE_CODE_FLT types carry their floating-point format, except for those creating from reading DWARF or stabs debug info. Those will be addressed by this commit. The main issue here is that we actually have to determine which floating- point format to use. Currently, we only have the type length as input to this decision. In the future, we may hopefully get --at least in DWARF-- additional information to help disambiguate multiple different formats of the same length. For now, we can still look at the type name as a hint. This decision logic is encapsulated in a gdbarch callback to allow platform-specific overrides. The default implementation use the same logic (compare type length against the various gdbarch_..._bit sizes) that is currently implemented in floatformat_from_length. With this commit, all platforms still use the default logic, so there should be no actual change in behavior. A follow-on commit will add support for __float128 on Intel and Power. Once dwarf2read.c and stabsread.c make use of the new callback to determine floating-point formats, we're now sure every TYPE_CODE_FLT type will always carry its format. The commit therefore adds asserts to verify_floatformat to ensure new code will continue to always provide formats, and removes the code in floatformat_from_type that used to handle types with a NULL TYPE_FLOATFORMAT. gdb/ChangeLog: * gdbarch.sh (floatformat_for_type): New gdbarch callback. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (default_floatformat_for_type): New prototype. * arch-utils.c (default_floatformat_for_type): New function. * doublest.c (floatformat_from_length): Remove. (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL. * gdbtypes.c (verify_floatformat): Require non-NULL format. * dwarf2read.c (dwarf2_init_float_type): New function. (read_base_type): Use it. * stabsread.c (dbx_init_float_type): New function. (read_sun_floating_type): Use it. (read_range_type): Likewise. Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
2016-09-06 23:31:53 +08:00
gdbarch->floatformat_for_type = default_floatformat_for_type;
gdbarch->ptr_bit = gdbarch->int_bit;
gdbarch->char_signed = -1;
gdbarch->virtual_frame_pointer = legacy_virtual_frame_pointer;
gdbarch->num_regs = -1;
gdbarch->sp_regnum = -1;
gdbarch->pc_regnum = -1;
gdbarch->ps_regnum = -1;
gdbarch->fp0_regnum = -1;
gdbarch->stab_reg_to_regnum = no_op_reg_to_regnum;
gdbarch->ecoff_reg_to_regnum = no_op_reg_to_regnum;
gdbarch->sdb_reg_to_regnum = no_op_reg_to_regnum;
gdbarch->dwarf2_reg_to_regnum = no_op_reg_to_regnum;
gdbarch->deprecated_fp_regnum = -1;
gdbarch->call_dummy_location = AT_ENTRY_POINT;
Skip unwritable frames in command "finish" Nowadays, GDB can't insert breakpoint on the return address of the exception handler on ARM M-profile, because the address is a magic one 0xfffffff9, (gdb) bt #0 CT32B1_IRQHandler () at ../src/timer.c:67 #1 <signal handler called> #2 main () at ../src/timer.c:127 (gdb) info frame Stack level 0, frame at 0x200ffa8: pc = 0x4ec in CT32B1_IRQHandler (../src/timer.c:67); saved pc = 0xfffffff9 called by frame at 0x200ffc8 source language c. Arglist at 0x200ffa0, args: Locals at 0x200ffa0, Previous frame's sp is 0x200ffa8 Saved registers: r7 at 0x200ffa0, lr at 0x200ffa4 (gdb) x/x 0xfffffff9 0xfffffff9: Cannot access memory at address 0xfffffff9 (gdb) finish Run till exit from #0 CT32B1_IRQHandler () at ../src/timer.c:67 Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 0. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. even some debug probe can't set hardware breakpoint on the magic address too, (gdb) hbreak *0xfffffff9 Hardware assisted breakpoint 2 at 0xfffffff9 (gdb) c Continuing. Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 2. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. The problem described above is quite similar to PR 8841, in which GDB can't set breakpoint on signal trampoline, which is mapped to a read-only page by kernel. The rationale of this patch is to skip "unwritable" frames when looking for caller frames in command "finish", and a new gdbarch method code_of_frame_writable is added. This patch fixes the problem on ARM cortex-m target, but it can be used to fix PR 8841 too. gdb: 2016-05-10 Yao Qi <yao.qi@arm.com> * arch-utils.c (default_code_of_frame_writable): New function. * arch-utils.h (default_code_of_frame_writable): Declare. * arm-tdep.c (arm_code_of_frame_writable): New function. (arm_gdbarch_init): Install gdbarch method code_of_frame_writable if the target is M-profile. * frame.c (skip_unwritable_frames): New function. * frame.h (skip_unwritable_frames): Declare. * gdbarch.sh (code_of_frame_writable): New. * gdbarch.c, gdbarch.h: Re-generated. * infcmd.c (finish_command): Call skip_unwritable_frames.
2016-05-24 00:32:56 +08:00
gdbarch->code_of_frame_writable = default_code_of_frame_writable;
gdbarch->print_registers_info = default_print_registers_info;
gdbarch->print_float_info = default_print_float_info;
gdbarch->register_sim_regno = legacy_register_sim_regno;
gdbarch->cannot_fetch_register = cannot_register_not;
gdbarch->cannot_store_register = cannot_register_not;
gdbarch->convert_register_p = generic_convert_register_p;
gdbarch->value_from_register = default_value_from_register;
gdbarch->pointer_to_address = unsigned_pointer_to_address;
gdbarch->address_to_pointer = unsigned_address_to_pointer;
gdbarch->return_in_first_hidden_param_p = default_return_in_first_hidden_param_p;
gdbarch->breakpoint_from_pc = default_breakpoint_from_pc;
New gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind This patch adds two gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind, and uses target_info.placed_size as "kind" of the breakpoint. This patch updates the usages of target_info.placed_size. The "kind" of a breakpoint is determined by gdbarch rather than target, so we have gdbarch method breakpoint_kind_from_pc, and we should set target_info.placed_size out of each implementation of target to_insert_breakpoint. In this way, each target doesn't have to set target_info.placed_size any more. This patch also sets target_info.placed_address before target_insert_breakpoint too, so that target to_insert_breakpoint can use it, see record_full_insert_breakpoint. Before we call target_insert_breakpoint, we set target_info.placed_address and target_info.placed_size like this, CORE_ADDR addr = bl->target_info.reqstd_address; bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr); bl->target_info.placed_address = addr; return target_insert_breakpoint (bl->gdbarch, &bl->target_info); target_insert_breakpoint may fail, but it doesn't matter to the "kind" and "placed_address" of a breakpoint. They should be determined by gdbarch. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define breakpoint_kind_from_pc and sw_breakpoint_from_kind. (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call set_gdbarch_breakpoint_kind_from_pc and set_gdbarch_sw_breakpoint_from_kind. * arm-tdep.c: Add comments. * bfin-tdep.c: Likewise. * breakpoint.c (breakpoint_kind): New function. (insert_bp_location): Set target_info.placed_size and target_info.placed_address. (bkpt_insert_location): Likewise. * cris-tdep.c: Add comments. * gdbarch.sh (breakpoint_kind_from_pc): New. (sw_breakpoint_from_kind): New. * gdbarch.c, gdbarch.h: Regenerated. * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set bp_tgt->placed_size. (ia64_memory_remove_breakpoint): Don't assert bp_tgt->placed_size. (ia64_breakpoint_kind_from_pc): New function. (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc. * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set bp_tgt->placed_size. * mem-break.c (default_memory_insert_breakpoint): Don't set bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind. (default_memory_remove_breakpoint): Call gdbarch_sw_breakpoint_from_kind. (memory_validate_breakpoint): Don't check bp_tgt->placed_size. * mips-tdep.c: Add comments. * mt-tdep.c: Likewise. * nios2-tdep.c: Likewise. * record-full.c (record_full_insert_breakpoint): Don't call gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address and bp_tgt->placed_size. * remote.c (remote_insert_breakpoint): Don't call gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size. Don't set bp_tgt->placed_address and bp_tgt->placed_size. (remote_insert_hw_breakpoint): Likewise. * score-tdep.c: Likewise. * sh-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * v850-tdep.c: Likewise. * xtensa-tdep.c: Likewise.
2016-11-03 22:35:13 +08:00
gdbarch->sw_breakpoint_from_kind = NULL;
gdbarch->breakpoint_kind_from_current_state = default_breakpoint_kind_from_current_state;
gdbarch->memory_insert_breakpoint = default_memory_insert_breakpoint;
gdbarch->memory_remove_breakpoint = default_memory_remove_breakpoint;
gdbarch->remote_register_number = default_remote_register_number;
gdbarch->stabs_argument_has_addr = default_stabs_argument_has_addr;
gdbarch->convert_from_func_ptr_addr = convert_from_func_ptr_addr_identity;
gdbarch->addr_bits_remove = core_addr_identity;
Delegate opcodes to select disassembler in GDB This patch changes GDB to use disassembler selected by opcodes in default, so that we don't have to duplicate the selection logic again in GDB side. For example, gdb/score-tdep.c has static int score_print_insn (bfd_vma memaddr, struct disassemble_info *info) { if (info->endian == BFD_ENDIAN_BIG) return print_insn_big_score (memaddr, info); else return print_insn_little_score (memaddr, info); } and opcodes/disassemble.c has the same logic, case bfd_arch_score: if (big) disassemble = print_insn_big_score; else disassemble = print_insn_little_score; This patch removes the logic in GDB and calls opcodes/disassemble.c:disassembler in default to select disassembler. gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * alpha-tdep.c (alpha_gdbarch_init): Don't call set_gdbarch_print_insn. * arc-tdep.c (arc_gdbarch_init): Likewise. * arch-utils.c: include dis-asm.h. (default_print_insn): New function. * arch-utils.h (default_print_insn): Declare. * avr-tdep.c (avr_gdbarch_init): Don't call set_gdbarch_print_insn. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cris-tdep.c (cris_delayed_get_disassembler): Remove. (cris_gdbarch_init): Don't call set_gdbarch_print_insn. * frv-tdep.c (frv_gdbarch_init): Likewise. * ft32-tdep.c (ft32_gdbarch_init): Likewise. * gdbarch.sh (print_insn): Use default_print_insn. * gdbarch.c: Regenerated. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * iq2000-tdep.c (iq2000_gdbarch_init): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * m68hc11-tdep.c (gdb_print_insn_m68hc11): Remove. (m68hc11_gdbarch_init): Don't call set_gdbarch_print_insn. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_gdbarch_init): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * nios2-tdep.c (nios2_print_insn): Remove. (nios2_gdbarch_init): Don't call set_gdbarch_print_insn. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * score-tdep.c (score_print_insn): Remove. (score_gdbarch_init): Don't call set_gdbarch_print_insn. * sh-tdep.c (sh_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * tic6x-tdep.c (tic6x_print_insn): Remove. (tic6x_gdbarch_init): Don't call set_gdbarch_print_insn. * tilegx-tdep.c (tilegx_gdbarch_init): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * vax-tdep.c (vax_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
2017-05-25 00:23:52 +08:00
gdbarch->print_insn = default_print_insn;
gdbarch->skip_trampoline_code = generic_skip_trampoline_code;
gdbarch->skip_solib_resolver = generic_skip_solib_resolver;
gdbarch->in_solib_return_trampoline = generic_in_solib_return_trampoline;
infrun: step through indirect branch thunks With version 7.3 GCC supports new options -mindirect-branch=<choice> -mfunction-return=<choice> The choices are: keep behaves as before thunk jumps through a thunk thunk-external jumps through an external thunk thunk-inline jumps through an inlined thunk For thunk and thunk-external, GDB would, on a call to the thunk, step into the thunk and then resume to its caller assuming that this is an undebuggable function. On a return thunk, GDB would stop inside the thunk. Make GDB step through such thunks instead. Before: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) 30 } After: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) inc (x=41) at gdb.base/step-indirect-call-thunk.c:23 23 return x + 1; This is independent of the step-mode. In order to step into the thunk, you would need to use stepi. When stepping over an indirect call thunk, GDB would first step through the thunk, then recognize that it stepped into a sub-routine and resume to the caller (of the thunk). Not sure whether this is worth optimizing. Thunk detection is implemented via gdbarch. I implemented the methods for IA. Other architectures may run into unexpected fails. The tests assume a fixed number of instruction steps to reach a thunk. This depends on the compiler as well as the architecture. They may need adjustments when we add support for more architectures. Or we can simply drop those tests that cover being able to step into thunks using instruction stepping. When using an older GCC, the tests will fail to build and will be reported as untested: Running .../gdb.base/step-indirect-call-thunk.exp ... gdb compile failed, \ gcc: error: unrecognized command line option '-mindirect-branch=thunk' gcc: error: unrecognized command line option '-mfunction-return=thunk' === gdb Summary === # of untested testcases 1 gdb/ * infrun.c (process_event_stop_test): Call gdbarch_in_indirect_branch_thunk. * gdbarch.sh (in_indirect_branch_thunk): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * x86-tdep.h: New. * x86-tdep.c: New. * Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o. (HFILES_NO_SRCDIR): Add x86-tdep.h. (ALLDEPFILES): Add x86-tdep.c. * arch-utils.h (default_in_indirect_branch_thunk): New. * arch-utils.c (default_in_indirect_branch_thunk): New. * i386-tdep: Include x86-tdep.h. (i386_in_indirect_branch_thunk): New. (i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch function. * amd64-tdep: Include x86-tdep.h. (amd64_in_indirect_branch_thunk): New. (amd64_init_abi): Set in_indirect_branch_thunk gdbarch function. testsuite/ * gdb.base/step-indirect-call-thunk.exp: New. * gdb.base/step-indirect-call-thunk.c: New. * gdb.reverse/step-indirect-call-thunk.exp: New. * gdb.reverse/step-indirect-call-thunk.c: New.
2018-02-14 21:30:57 +08:00
gdbarch->in_indirect_branch_thunk = default_in_indirect_branch_thunk;
gdbarch->stack_frame_destroyed_p = generic_stack_frame_destroyed_p;
gdbarch->coff_make_msymbol_special = default_coff_make_msymbol_special;
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
gdbarch->make_symbol_special = default_make_symbol_special;
gdbarch->adjust_dwarf2_addr = default_adjust_dwarf2_addr;
gdbarch->adjust_dwarf2_line = default_adjust_dwarf2_line;
[gdbarch] New method "execute_dwarf_cfa_vendor_op" and migrate SPARC to it Recently a feature called "return address signing" has been added to GCC to prevent stack smash stack on AArch64. For details please refer: https://gcc.gnu.org/ml/gcc-patches/2017-01/msg00376.html GDB needs to be aware of this feature so it can restore the original return address which is critical for unwinding. On compiler side, whenever return address, i.e. LR register, is mangled or restored by hardware instruction, compiler is expected to generate a DW_CFA_AARCH64_negate_ra_state to toggle return address signing status. DW_CFA_AARCH64_negate_ra_state is using the same CFI number and therefore need to be multiplexed with DW_CFA_GNU_window_save which was designed for SPARC. A new gdbarch method "execute_dwarf_cfa_vendor_op" is introduced by this patch. It's parameters has been restricted to those only needed by SPARC and AArch64 for multiplexing DW_CFA_GNU_window_save which is a CFI operation takes none operand. Should any further DWARF CFI operation want to be multiplexed in the future, the parameter list can be extended. Below is the current function prototype. typedef int (gdbarch_execute_dwarf_cfa_vendor_op_ftype) (struct gdbarch *gdbarch, gdb_byte op, struct dwarf2_frame_state *fs); DW_CFA_GNU_window_save support for SPARC is migrated to this new gdbarch method by this patch. gdb/ * gdbarch.sh: New gdbarch method execute_dwarf_cfa_vendor_op. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * dwarf2-frame.c (dwarf2_frame_state_alloc_regs): Made the visibility external. (execute_cfa_program): Call execute_dwarf_cfa_vendor_op for CFI between DW_CFA_lo_user and DW_CFA_high_user inclusive. (enum cfa_how_kind): Move to ... (struct dwarf2_frame_state_reg_info): Likewise. (struct dwarf2_frame_state): Likewise. * dwarf2-frame.h: ... here. (dwarf2_frame_state_alloc_regs): New declaration. * sparc-tdep.c (sparc_execute_dwarf_cfa_vendor_op): New function. (sparc32_gdbarch_init): Register execute_dwarf_cfa_vendor_op hook.
2017-04-26 21:05:03 +08:00
gdbarch->execute_dwarf_cfa_vendor_op = default_execute_dwarf_cfa_vendor_op;
gdbarch->register_reggroup_p = default_register_reggroup_p;
add a default method for gdbarch_skip_permanent_breakpoint breakpoint.c uses gdbarch_breakpoint_from_pc to determine whether a breakpoint location points at a permanent breakpoint: static int bp_loc_is_permanent (struct bp_location *loc) { ... addr = loc->address; bpoint = gdbarch_breakpoint_from_pc (loc->gdbarch, &addr, &len); ... if (target_read_memory (loc->address, target_mem, len) == 0 && memcmp (target_mem, bpoint, len) == 0) retval = 1; ... So I think we should default the gdbarch_skip_permanent_breakpoint hook to advancing the PC by the length of the breakpoint instruction, as determined by gdbarch_breakpoint_from_pc. I believe that simple implementation does the right thing for most architectures. If there's an oddball architecture where that doesn't work, then it should override the hook, just like it should be overriding the hook if there was no default anyway. The only two implementation of skip_permanent_breakpoint are i386_skip_permanent_breakpoint, for x86, and hppa_skip_permanent_breakpoint, for PA-RISC/HP-UX The x86 implementation is trivial, and can clearly be replaced by the new default. I don't know about the HP-UX one though, I know almost nothing about PA. It may well be advancing the PC ends up being equivalent. Otherwise, it must be that "jump $pc_after_bp" doesn't work either... Tested on x86_64 Fedora 20 native and gdbserver. gdb/ 2014-11-12 Pedro Alves <palves@redhat.com> * arch-utils.c (default_skip_permanent_breakpoint): New function. * arch-utils.h (default_skip_permanent_breakpoint): New declaration. * gdbarch.sh (skip_permanent_breakpoint): Now an 'f' function. Install default_skip_permanent_breakpoint as default method. * i386-tdep.c (i386_skip_permanent_breakpoint): Delete function. (i386_gdbarch_init): Don't install it. * infrun.c (resume): Assume there's always a gdbarch_skip_permanent_breakpoint implementation. * gdbarch.h, gdbarch.c: Regenerate.
2014-11-12 18:10:48 +08:00
gdbarch->skip_permanent_breakpoint = default_skip_permanent_breakpoint;
gdbarch->displaced_step_hw_singlestep = default_displaced_step_hw_singlestep;
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
gdbarch->displaced_step_fixup = NULL;
gdbarch->displaced_step_location = NULL;
gdbarch->relocate_instruction = NULL;
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 17:51:43 +08:00
gdbarch->has_shared_address_space = default_has_shared_address_space;
Add fast tracepoints. * arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-06 12:20:27 +08:00
gdbarch->fast_tracepoint_valid_at = default_fast_tracepoint_valid_at;
gdbarch->guess_tracepoint_registers = default_guess_tracepoint_registers;
gdb 2010-03-05 Corinna Vinschen <vinschen@redhat.com> Tom Tromey <tromey@redhat.com> * utils.c (host_char_to_target): Add 'gdbarch' argument. (parse_escape): Likewise. * python/py-utils.c (unicode_to_target_string): Update. (unicode_to_target_python_string): Update. (target_string_to_unicode): Update. * printcmd.c (printf_command): Update. * p-exp.y (yylex): Update. * objc-exp.y (yylex): Update. * mi/mi-parse.c: Include charset.h. (mi_parse_escape): New function. (mi_parse_argv): Use it. * jv-exp.y (yylex): Update. * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New function. (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset. * gdbarch.sh (auto_charset, auto_wide_charset): New. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * defs.h (parse_escape): Update. * cli/cli-setshow.c: Include arch-utils.h. (do_setshow_command): Update. * cli/cli-cmds.c (echo_command): Update. * charset.h (target_charset, target_wide_charset): Update. * charset.c: Include arch-utils.h. (target_charset_name): Default to "auto". (target_wide_charset_name): Likewise. (show_target_charset_name): Handle "auto". (show_target_wide_charset_name): Likewise. (be_le_arch): New global. (set_be_le_names): Add 'gdbarch' argument. (validate): Likewise. Don't call set_be_le_names. (set_charset_sfunc, set_host_charset_sfunc) (set_target_charset_sfunc, set_target_wide_charset_sfunc): Update. (target_charset): Add 'gdbarch' argument. (target_wide_charset): Likewise. Remove 'byte_order' argument. (auto_target_charset_name): New global. (default_auto_charset, default_auto_wide_charset): New functions. (_initialize_charset): Set auto_target_charset_name. Allow "auto" for target charsets. Copy result of nl_langinfo. Use GetACP if USE_WIN32API. * c-lang.c (charset_for_string_type): Add 'gdbarch' argument, remove 'byte_order' argument. Update. (classify_type): Likewise. (c_emit_char): Update. (c_printchar): Update. (c_printstr): Update. (c_get_string): Update. (evaluate_subexp_c): Update. * arch-utils.h (default_auto_charset, default_auto_wide_charset): Declare. * python/python.c (gdbpy_target_charset): New function. (gdbpy_target_wide_charset): Likewise. (GdbMethods): Update. * NEWS: Update. gdb/doc * gdb.texinfo (Basic Python): Document target_charset and target_wide_charset. gdb/testsuite * gdb.python/py-prettyprint.py (pp_nullstr.to_string): Use gdb.target_charset. (pp_ns.to_string): Likewise.
2010-03-06 04:18:19 +08:00
gdbarch->auto_charset = default_auto_charset;
gdbarch->auto_wide_charset = default_auto_wide_charset;
gdbarch->gen_return_address = default_gen_return_address;
New "iterate_over_objfiles_in_search_order" gdbarch method. This patch introduces the "iterate_over_objfiles_in_search_order" gdbarch method, as well as its default implementation, and converts the areas where it will matter to using this gdbarch method. The default method implementation is the only one installed, and the changes should have no functional impact in terms of behavior. This only paves the way for the architectures that will need their own version. gdb/ChangeLog: * gdbarch.sh: Add generation of "iterate_over_objfiles_in_search_order_cb_ftype" typedef in gdbarch.h. Add include of "objfiles.h" in gdbarch.c. (iterate_over_objfiles_in_search_order): New gdbarch method. * gdbarch.h, gdbarch.c: Regenerate. * objfiles.h (default_iterate_over_objfiles_in_search_order): Add declaration. * objfiles.c (default_iterate_over_objfiles_in_search_order): New function. * symtab.c (lookup_symbol_aux_objfile): New function, extracted out of lookup_symbol_aux_symtabs. (lookup_symbol_aux_symtabs): Replace extracted-out code by call to lookup_symbol_aux_objfile. (struct global_sym_lookup_data): New type. (lookup_symbol_global_iterator_cb): New function. (lookup_symbol_global): Search for symbol using gdbarch_iterate_over_objfiles_in_search_order and lookup_symbol_global_iterator_cb. * findvar.c (struct minsym_lookup_data): New type. (minsym_lookup_iterator_cb): New function. (default_read_var_value) [case LOC_UNRESOLVED]: Resolve the symbol's address via gdbarch_iterate_over_objfiles_in_search_order and minsym_lookup_iterator_cb.
2012-06-05 21:50:50 +08:00
gdbarch->iterate_over_objfiles_in_search_order = default_iterate_over_objfiles_in_search_order;
gdbarch->ravenscar_ops = NULL;
gdbarch->insn_is_call = default_insn_is_call;
gdbarch->insn_is_ret = default_insn_is_ret;
gdbarch->insn_is_jump = default_insn_is_jump;
gdbarch->print_auxv_entry = default_print_auxv_entry;
gdbarch->vsyscall_range = default_vsyscall_range;
gdbarch->infcall_mmap = default_infcall_mmap;
compile: Use also inferior munmap Currently inferior memory is allocated by inferior mmap() but it is never deallocated; despite the injected objfile incl. its symbols is freed. This was intentional so that one can do for example: inferior: char *str = "foo"; GDB: (gdb) compile code str = "bar"; I believe later patches will be needed to introduce full control over keeping vs. discarding the injected module as being discussed in: compile: objfiles lifetime UI https://sourceware.org/ml/gdb/2015-04/msg00051.html Message-ID: <20150429135735.GA16974@host1.jankratochvil.net> https://sourceware.org/ml/gdb/2015-05/msg00007.html As decided by Phil it is better not to leak inferior pages as users can workaround the issue above for example by: (gdb) compile code str = strdup ("bar"); I have checked that in fact gdb/doc/ (written by Phil) already expects the injected code will be unmapped so that does not need to be changed: compile code int ff = 5; p = &ff; In this example, @code{p} would point to @code{ff} when the @code{compile} command is executing the source code provided to it. However, as variables in the (example) program persist with their assigned values, the variable @code{p} would point to an invalid location when the command exists. gdb/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * arch-utils.c (default_infcall_munmap): New. * arch-utils.h (default_infcall_munmap): New declaration. * compile/compile-object-load.c (struct munmap_list, munmap_list_add) (munmap_list_free, munmap_listp_free_cleanup): New. (struct setup_sections_data): Add field munmap_list_headp. (setup_sections): Call munmap_list_add. (compile_object_load): New variable munmap_list_head, initialize setup_sections_data.munmap_list_headp, return munmap_list_head. * compile/compile-object-load.h (struct munmap_list): New declaration. (struct compile_module): Add field munmap_list_head. (munmap_list_free): New declaration. * compile/compile-object-run.c (struct do_module_cleanup): Add field munmap_list_head. (do_module_cleanup): Call munmap_list_free. (compile_object_run): Pass munmap_list_head to do_module_cleanup. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (infcall_munmap): New. * linux-tdep.c (linux_infcall_munmap): New. (linux_init_abi): Install it. gdb/testsuite/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.compile/compile.exp (keep jit in memory): Rename to ... (do not keep jit in memory): ... this. (expect 5): Change it to ... (expect no 5): ... this.
2015-06-04 03:22:56 +08:00
gdbarch->infcall_munmap = default_infcall_munmap;
gdbarch->gcc_target_options = default_gcc_target_options;
add gnu_triplet_regexp gdbarch method gdb has to inform libcc1.so of the target being used, so that the correct compiler can be invoked. The compiler is invoked using the GNU configury triplet prefix, e.g., "x86_64-unknown-linux-gnu-gcc". In order for this to work we need to map the gdbarch to the GNU configury triplet arch. In most cases these are identical; however, the x86 family poses some problems, as the BFD arch names are quite different from the GNU triplet names. So, we introduce a new gdbarch method for this. A regular expression is used because there are various valid values for the arch prefix in the triplet. This patch also updates the osabi code to associate a regular expression with the OS ABI. I have only added a concrete value for Linux. Note that the "-gnu" part is optional, at least on Fedora it is omitted from the installed GCC executable's name. gdb/ChangeLog 2014-12-12 Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * osabi.h (osabi_triplet_regexp): Declare. * osabi.c (struct osabi_names): New. (gdb_osabi_names): Change type to struct osabi_names. Update values. (gdbarch_osabi_name): Update. (osabi_triplet_regexp): New function. (osabi_from_tdesc_string, _initialize_gdb_osabi): Update. * i386-tdep.c (i386_gnu_triplet_regexp): New method. (i386_elf_init_abi, i386_go32_init_abi, i386_gdbarch_init): Call set_gdbarch_gnu_triplet_regexp. * gdbarch.sh (gnu_triplet_regexp): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_gnu_triplet_regexp): Declare. * arch-utils.c (default_gnu_triplet_regexp): New function.
2014-06-13 23:28:24 +08:00
gdbarch->gnu_triplet_regexp = default_gnu_triplet_regexp;
gdbarch->addressable_memory_unit_size = default_addressable_memory_unit_size;
gdbarch->type_align = default_type_align;
1999-06-15 02:08:47 +08:00
/* gdbarch_alloc() */
return gdbarch;
1999-06-15 02:08:47 +08:00
}
/* Allocate extra space using the per-architecture obstack. */
void *
gdbarch_obstack_zalloc (struct gdbarch *arch, long size)
{
void *data = obstack_alloc (arch->obstack, size);
memset (data, 0, size);
return data;
}
/* See gdbarch.h. */
char *
gdbarch_obstack_strdup (struct gdbarch *arch, const char *string)
{
return obstack_strdup (arch->obstack, string);
}
/* Free a gdbarch struct. This should never happen in normal
operation --- once you've created a gdbarch, you keep it around.
However, if an architecture's init function encounters an error
building the structure, it may need to clean up a partially
constructed gdbarch. */
void
gdbarch_free (struct gdbarch *arch)
{
struct obstack *obstack;
gdb_assert (arch != NULL);
gdb_assert (!arch->initialized_p);
obstack = arch->obstack;
obstack_free (obstack, 0); /* Includes the ARCH. */
xfree (obstack);
}
/* Ensure that all values in a GDBARCH are reasonable. */
1999-06-15 02:08:47 +08:00
static void
verify_gdbarch (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
string_file log;
1999-06-15 02:08:47 +08:00
/* fundamental */
if (gdbarch->byte_order == BFD_ENDIAN_UNKNOWN)
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.puts ("\n\tbyte-order");
if (gdbarch->bfd_arch_info == NULL)
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.puts ("\n\tbfd_arch_info");
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Check those that need to be defined for the given multi-arch level. */
/* Skip verify of bits_big_endian, invalid_p == 0 */
2000-08-11 10:55:38 +08:00
/* Skip verify of short_bit, invalid_p == 0 */
/* Skip verify of int_bit, invalid_p == 0 */
/* Skip verify of long_bit, invalid_p == 0 */
/* Skip verify of long_long_bit, invalid_p == 0 */
/* Skip verify of half_bit, invalid_p == 0 */
if (gdbarch->half_format == 0)
gdbarch->half_format = floatformats_ieee_half;
2000-08-11 10:55:38 +08:00
/* Skip verify of float_bit, invalid_p == 0 */
if (gdbarch->float_format == 0)
gdbarch->float_format = floatformats_ieee_single;
2000-08-11 10:55:38 +08:00
/* Skip verify of double_bit, invalid_p == 0 */
if (gdbarch->double_format == 0)
gdbarch->double_format = floatformats_ieee_double;
2000-08-11 10:55:38 +08:00
/* Skip verify of long_double_bit, invalid_p == 0 */
if (gdbarch->long_double_format == 0)
gdbarch->long_double_format = floatformats_ieee_double;
Teach GDB that wchar_t is a built-in type in C++ mode GDB is currently not aware that wchar_t is a built-in type in C++ mode. This is usually not a problem because the debug info describes the type, so when you have a program loaded, you don't notice this. However, if you try expressions involving wchar_t before a program is loaded, gdb errors out: (gdb) p (wchar_t)-1 No symbol table is loaded. Use the "file" command. (gdb) p L"hello" No type named wchar_t. (gdb) ptype L"hello" No type named wchar_t. This commit teaches gdb about the type. After: (gdb) p (wchar_t)-1 $1 = -1 L'\xffffffff' (gdb) p L"hello" $2 = L"hello" (gdb) ptype L"hello" type = wchar_t [6] Unlike char16_t/char32_t, unfortunately, the underlying type of wchar_t is implementation dependent, both size and signness. So this requires adding a couple new gdbarch hooks. I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it seems to me that the majority of the ABIs have a 4-byte signed wchar_t, so that's what I made the default for GDB too. And then I looked for which ports have a 16-bit and/or unsigned wchar_t, and made GDB follow suit. gdb/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>: New enum value. (cplus_language_arch_info): Register cplus_primitive_type_wchar_t. * gdbtypes.h (struct builtin_type) <builtin_wchar>: New field. * gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type. * gdbarch.sh (wchar_bit, wchar_signed): New per-arch values. * gdbarch.h, gdbarch.c: Regenerate. * aarch64-tdep.c (aarch64_gdbarch_init): Override gdbarch_wchar_bit and gdbarch_wchar_signed. * alpha-tdep.c (alpha_gdbarch_init): Likewise. * arm-tdep.c (arm_gdbarch_init): Likewise. * avr-tdep.c (avr_gdbarch_init): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * i386-nto-tdep.c (i386nto_init_abi): Likewise. * i386-tdep.c (i386_go32_init_abi): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * sparc64-tdep.c (sparc64_init_abi): Likewise. * windows-tdep.c (windows_init_abi): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. gdb/testsuite/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * gdb.cp/wide_char_types.c: Include <wchar.h>. (wchar): New global. * gdb.cp/wide_char_types.exp (wide_char_types_program) (do_test_wide_char, wide_char_types_no_program, top level): Add wchar_t testing.
2017-04-12 21:00:49 +08:00
/* Skip verify of wchar_bit, invalid_p == 0 */
if (gdbarch->wchar_signed == -1)
gdbarch->wchar_signed = 1;
Add gdbarch callback to provide formats for debug info float types At this point, all TYPE_CODE_FLT types carry their floating-point format, except for those creating from reading DWARF or stabs debug info. Those will be addressed by this commit. The main issue here is that we actually have to determine which floating- point format to use. Currently, we only have the type length as input to this decision. In the future, we may hopefully get --at least in DWARF-- additional information to help disambiguate multiple different formats of the same length. For now, we can still look at the type name as a hint. This decision logic is encapsulated in a gdbarch callback to allow platform-specific overrides. The default implementation use the same logic (compare type length against the various gdbarch_..._bit sizes) that is currently implemented in floatformat_from_length. With this commit, all platforms still use the default logic, so there should be no actual change in behavior. A follow-on commit will add support for __float128 on Intel and Power. Once dwarf2read.c and stabsread.c make use of the new callback to determine floating-point formats, we're now sure every TYPE_CODE_FLT type will always carry its format. The commit therefore adds asserts to verify_floatformat to ensure new code will continue to always provide formats, and removes the code in floatformat_from_type that used to handle types with a NULL TYPE_FLOATFORMAT. gdb/ChangeLog: * gdbarch.sh (floatformat_for_type): New gdbarch callback. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (default_floatformat_for_type): New prototype. * arch-utils.c (default_floatformat_for_type): New function. * doublest.c (floatformat_from_length): Remove. (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL. * gdbtypes.c (verify_floatformat): Require non-NULL format. * dwarf2read.c (dwarf2_init_float_type): New function. (read_base_type): Use it. * stabsread.c (dbx_init_float_type): New function. (read_sun_floating_type): Use it. (read_range_type): Likewise. Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
2016-09-06 23:31:53 +08:00
/* Skip verify of floatformat_for_type, invalid_p == 0 */
2000-08-11 10:55:38 +08:00
/* Skip verify of ptr_bit, invalid_p == 0 */
if (gdbarch->addr_bit == 0)
gdbarch->addr_bit = gdbarch_ptr_bit (gdbarch);
if (gdbarch->dwarf2_addr_size == 0)
gdbarch->dwarf2_addr_size = gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT;
if (gdbarch->char_signed == -1)
gdbarch->char_signed = 1;
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of read_pc, has predicate. */
/* Skip verify of write_pc, has predicate. */
/* Skip verify of virtual_frame_pointer, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of pseudo_register_read, has predicate. */
/* Skip verify of pseudo_register_read_value, has predicate. */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of pseudo_register_write, has predicate. */
if (gdbarch->num_regs == -1)
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.puts ("\n\tnum_regs");
/* Skip verify of num_pseudo_regs, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of ax_pseudo_register_collect, has predicate. */
/* Skip verify of ax_pseudo_register_push_stack, has predicate. */
Intel MPX bound violation handling With Intel Memory Protection Extensions it was introduced the concept of boundary violation. A boundary violations is presented to the inferior as a segmentation fault having SIGCODE 3. This patch adds a handler for a boundary violation extending the information displayed when a bound violation is presented to the inferior. In the stop mode case the debugger will also display the kind of violation: "upper" or "lower", bounds and the address accessed. On no stop mode the information will still remain unchanged. Additional information about bound violations are not meaningful in that case user does not know the line in which violation occurred as well. When the segmentation fault handler is stop mode the out puts will be changed as exemplified below. The usual output of a segfault is: Program received signal SIGSEGV, Segmentation fault 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In case it is a bound violation it will be presented as: Program received signal SIGSEGV, Segmentation fault Upper bound violation while accessing address 0x7fffffffc3b3 Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3] 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In mi mode the output of a segfault is: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c", func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"} ,{name="b",value="0x603050"}, {name="c",value="0x603070"}, {name="d",value="0x603090"},{name="len",value="7"}], file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"}, thread-id="1",stopped-threads="all",core="6" in the case of a bound violation: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", sigcode-meaning="Upper bound violation", lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f", frame={addr="0x0000000000400d7c",func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"}, {name="c",value="0x603070"},{name="d",value="0x603090"}, {name="len",value="7"}],file="i386-mpx-sigsegv.c", fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1", stopped-threads="all",core="6" 2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com> gdb/ChangeLog: * NEWS: Add entry for bound violation. * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add handler for segmentation fault. * gdbarch.sh (handle_segmentation_fault): New. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New. (SIG_CODE_BONDARY_FAULT): New define. (i386_linux_init_abi): Use i386_mpx_bound_violation_handler. * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New. * i386-tdep.c (i386_mpx_enabled): Add as external. * i386-tdep.c (i386_mpx_enabled): Add as external. * infrun.c (handle_segmentation_fault): New function. (print_signal_received_reason): Use handle_segmentation_fault. gdb/testsuite/ChangeLog: * gdb.arch/i386-mpx-sigsegv.c: New file. * gdb.arch/i386-mpx-sigsegv.exp: New file. * gdb.arch/i386-mpx-simple_segv.c: New file. * gdb.arch/i386-mpx-simple_segv.exp: New file. gdb/doc/ChangeLog: * gdb.texinfo (Signals): Add bound violation display hints for a SIGSEGV.
2016-02-19 00:24:59 +08:00
/* Skip verify of handle_segmentation_fault, has predicate. */
/* Skip verify of sp_regnum, invalid_p == 0 */
/* Skip verify of pc_regnum, invalid_p == 0 */
/* Skip verify of ps_regnum, invalid_p == 0 */
/* Skip verify of fp0_regnum, invalid_p == 0 */
/* Skip verify of stab_reg_to_regnum, invalid_p == 0 */
/* Skip verify of ecoff_reg_to_regnum, invalid_p == 0 */
/* Skip verify of sdb_reg_to_regnum, invalid_p == 0 */
/* Skip verify of dwarf2_reg_to_regnum, invalid_p == 0 */
if (gdbarch->register_name == 0)
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.puts ("\n\tregister_name");
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of register_type, has predicate. */
/* Skip verify of dummy_id, has predicate. */
/* Skip verify of deprecated_fp_regnum, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of push_dummy_call, has predicate. */
/* Skip verify of call_dummy_location, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of push_dummy_code, has predicate. */
Skip unwritable frames in command "finish" Nowadays, GDB can't insert breakpoint on the return address of the exception handler on ARM M-profile, because the address is a magic one 0xfffffff9, (gdb) bt #0 CT32B1_IRQHandler () at ../src/timer.c:67 #1 <signal handler called> #2 main () at ../src/timer.c:127 (gdb) info frame Stack level 0, frame at 0x200ffa8: pc = 0x4ec in CT32B1_IRQHandler (../src/timer.c:67); saved pc = 0xfffffff9 called by frame at 0x200ffc8 source language c. Arglist at 0x200ffa0, args: Locals at 0x200ffa0, Previous frame's sp is 0x200ffa8 Saved registers: r7 at 0x200ffa0, lr at 0x200ffa4 (gdb) x/x 0xfffffff9 0xfffffff9: Cannot access memory at address 0xfffffff9 (gdb) finish Run till exit from #0 CT32B1_IRQHandler () at ../src/timer.c:67 Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 0. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. even some debug probe can't set hardware breakpoint on the magic address too, (gdb) hbreak *0xfffffff9 Hardware assisted breakpoint 2 at 0xfffffff9 (gdb) c Continuing. Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 2. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. The problem described above is quite similar to PR 8841, in which GDB can't set breakpoint on signal trampoline, which is mapped to a read-only page by kernel. The rationale of this patch is to skip "unwritable" frames when looking for caller frames in command "finish", and a new gdbarch method code_of_frame_writable is added. This patch fixes the problem on ARM cortex-m target, but it can be used to fix PR 8841 too. gdb: 2016-05-10 Yao Qi <yao.qi@arm.com> * arch-utils.c (default_code_of_frame_writable): New function. * arch-utils.h (default_code_of_frame_writable): Declare. * arm-tdep.c (arm_code_of_frame_writable): New function. (arm_gdbarch_init): Install gdbarch method code_of_frame_writable if the target is M-profile. * frame.c (skip_unwritable_frames): New function. * frame.h (skip_unwritable_frames): Declare. * gdbarch.sh (code_of_frame_writable): New. * gdbarch.c, gdbarch.h: Re-generated. * infcmd.c (finish_command): Call skip_unwritable_frames.
2016-05-24 00:32:56 +08:00
/* Skip verify of code_of_frame_writable, invalid_p == 0 */
/* Skip verify of print_registers_info, invalid_p == 0 */
/* Skip verify of print_float_info, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of print_vector_info, has predicate. */
/* Skip verify of register_sim_regno, invalid_p == 0 */
/* Skip verify of cannot_fetch_register, invalid_p == 0 */
/* Skip verify of cannot_store_register, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of get_longjmp_target, has predicate. */
/* Skip verify of convert_register_p, invalid_p == 0 */
/* Skip verify of value_from_register, invalid_p == 0 */
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
/* Skip verify of pointer_to_address, invalid_p == 0 */
/* Skip verify of address_to_pointer, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of integer_to_address, has predicate. */
/* Skip verify of return_value, has predicate. */
/* Skip verify of return_in_first_hidden_param_p, invalid_p == 0 */
if (gdbarch->skip_prologue == 0)
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.puts ("\n\tskip_prologue");
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of skip_main_prologue, has predicate. */
PowerPC64 ELFv2 ABI: skip global entry point code This patch handles another aspect of the ELFv2 ABI, which unfortunately requires common code changes. In ELFv2, functions may provide both a global and a local entry point. The global entry point (where the function symbol points to) is intended to be used for function-pointer or cross-module (PLT) calls, and requires r12 to be set up to the entry point address itself. The local entry point (which is found at a fixed offset after the global entry point, as defined by bits in the symbol table entries' st_other field), instead expects r2 to be set up to the current TOC. Now, when setting a breakpoint on a function by name, you really want that breakpoint to trigger either way, no matter whether the function is called via its local or global entry point. Since the global entry point will always fall through into the local entry point, the way to achieve that is to simply set the breakpoint at the local entry point. One way to do that would be to have prologue parsing skip the code sequence that makes up the global entry point. Unfortunately, this does not work reliably, since -for optimized code- GDB these days will not actuall invoke the prologue parsing code but instead just set the breakpoint at the symbol address and rely on DWARF being correct at any point throughout the function ... Unfortunately, I don't really see any way to express the notion of local entry points with the current set of gdbarch callbacks. Thus this patch adds a new callback, skip_entrypoint, that is somewhat analogous to skip_prologue, but is called every time GDB needs to determine a function start address, even in those cases where GDB decides to not call skip_prologue. As a side effect, the skip_entrypoint implementation on ppc64 does not need to perform any instruction parsing; it can simply rely on the local entry point flags in the symbol table entry. With this implemented, two test cases would still fail to set the breakpoint correctly, but that's because they use the construct: gdb_test "break *hello" Now, using "*hello" explicitly instructs GDB to set the breakpoint at the numerical value of "hello" treated as function pointer, so it will by definition only hit the global entry point. I think this behaviour is unavoidable, but acceptable -- most people do not use this construct, and if they do, they get what they asked for ... In one of those two test cases, use of this construct is really not appropriate. I think this was added way back when as a means to work around prologue skipping problems on some platforms. These days that shouldn't really be necessary any more ... For the other (step-bt), we really want to make sure backtracing works on the very first instruction of the routine. To enable that test also on powerpc64le-linux, we can modify the code to call the test function via function pointer (which makes it use the global entry point in the ELFv2 ABI). gdb/ChangeLog: * gdbarch.sh (skip_entrypoint): New callback. * gdbarch.c, gdbarch.h: Regenerate. * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint. * infrun.c (fill_in_stop_func): Likewise. * ppc-linux-tdep.c: Include "elf/ppc64.h". (ppc_elfv2_elf_make_msymbol_special): New function. (ppc_elfv2_skip_entrypoint): Likewise. (ppc_linux_init_abi): Install them for ELFv2. gdb/testsuite/ChangeLog: * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint on a function. * gdb.base/step-bt.c: Call hello via function pointer to make sure its first instruction is executed on powerpc64le-linux.
2014-02-05 01:44:14 +08:00
/* Skip verify of skip_entrypoint, has predicate. */
if (gdbarch->inner_than == 0)
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.puts ("\n\tinner_than");
/* Skip verify of breakpoint_from_pc, invalid_p == 0 */
New gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind This patch adds two gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind, and uses target_info.placed_size as "kind" of the breakpoint. This patch updates the usages of target_info.placed_size. The "kind" of a breakpoint is determined by gdbarch rather than target, so we have gdbarch method breakpoint_kind_from_pc, and we should set target_info.placed_size out of each implementation of target to_insert_breakpoint. In this way, each target doesn't have to set target_info.placed_size any more. This patch also sets target_info.placed_address before target_insert_breakpoint too, so that target to_insert_breakpoint can use it, see record_full_insert_breakpoint. Before we call target_insert_breakpoint, we set target_info.placed_address and target_info.placed_size like this, CORE_ADDR addr = bl->target_info.reqstd_address; bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr); bl->target_info.placed_address = addr; return target_insert_breakpoint (bl->gdbarch, &bl->target_info); target_insert_breakpoint may fail, but it doesn't matter to the "kind" and "placed_address" of a breakpoint. They should be determined by gdbarch. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define breakpoint_kind_from_pc and sw_breakpoint_from_kind. (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call set_gdbarch_breakpoint_kind_from_pc and set_gdbarch_sw_breakpoint_from_kind. * arm-tdep.c: Add comments. * bfin-tdep.c: Likewise. * breakpoint.c (breakpoint_kind): New function. (insert_bp_location): Set target_info.placed_size and target_info.placed_address. (bkpt_insert_location): Likewise. * cris-tdep.c: Add comments. * gdbarch.sh (breakpoint_kind_from_pc): New. (sw_breakpoint_from_kind): New. * gdbarch.c, gdbarch.h: Regenerated. * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set bp_tgt->placed_size. (ia64_memory_remove_breakpoint): Don't assert bp_tgt->placed_size. (ia64_breakpoint_kind_from_pc): New function. (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc. * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set bp_tgt->placed_size. * mem-break.c (default_memory_insert_breakpoint): Don't set bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind. (default_memory_remove_breakpoint): Call gdbarch_sw_breakpoint_from_kind. (memory_validate_breakpoint): Don't check bp_tgt->placed_size. * mips-tdep.c: Add comments. * mt-tdep.c: Likewise. * nios2-tdep.c: Likewise. * record-full.c (record_full_insert_breakpoint): Don't call gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address and bp_tgt->placed_size. * remote.c (remote_insert_breakpoint): Don't call gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size. Don't set bp_tgt->placed_address and bp_tgt->placed_size. (remote_insert_hw_breakpoint): Likewise. * score-tdep.c: Likewise. * sh-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * v850-tdep.c: Likewise. * xtensa-tdep.c: Likewise.
2016-11-03 22:35:13 +08:00
if (gdbarch->breakpoint_kind_from_pc == 0)
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.puts ("\n\tbreakpoint_kind_from_pc");
New gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind This patch adds two gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind, and uses target_info.placed_size as "kind" of the breakpoint. This patch updates the usages of target_info.placed_size. The "kind" of a breakpoint is determined by gdbarch rather than target, so we have gdbarch method breakpoint_kind_from_pc, and we should set target_info.placed_size out of each implementation of target to_insert_breakpoint. In this way, each target doesn't have to set target_info.placed_size any more. This patch also sets target_info.placed_address before target_insert_breakpoint too, so that target to_insert_breakpoint can use it, see record_full_insert_breakpoint. Before we call target_insert_breakpoint, we set target_info.placed_address and target_info.placed_size like this, CORE_ADDR addr = bl->target_info.reqstd_address; bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr); bl->target_info.placed_address = addr; return target_insert_breakpoint (bl->gdbarch, &bl->target_info); target_insert_breakpoint may fail, but it doesn't matter to the "kind" and "placed_address" of a breakpoint. They should be determined by gdbarch. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define breakpoint_kind_from_pc and sw_breakpoint_from_kind. (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call set_gdbarch_breakpoint_kind_from_pc and set_gdbarch_sw_breakpoint_from_kind. * arm-tdep.c: Add comments. * bfin-tdep.c: Likewise. * breakpoint.c (breakpoint_kind): New function. (insert_bp_location): Set target_info.placed_size and target_info.placed_address. (bkpt_insert_location): Likewise. * cris-tdep.c: Add comments. * gdbarch.sh (breakpoint_kind_from_pc): New. (sw_breakpoint_from_kind): New. * gdbarch.c, gdbarch.h: Regenerated. * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set bp_tgt->placed_size. (ia64_memory_remove_breakpoint): Don't assert bp_tgt->placed_size. (ia64_breakpoint_kind_from_pc): New function. (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc. * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set bp_tgt->placed_size. * mem-break.c (default_memory_insert_breakpoint): Don't set bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind. (default_memory_remove_breakpoint): Call gdbarch_sw_breakpoint_from_kind. (memory_validate_breakpoint): Don't check bp_tgt->placed_size. * mips-tdep.c: Add comments. * mt-tdep.c: Likewise. * nios2-tdep.c: Likewise. * record-full.c (record_full_insert_breakpoint): Don't call gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address and bp_tgt->placed_size. * remote.c (remote_insert_breakpoint): Don't call gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size. Don't set bp_tgt->placed_address and bp_tgt->placed_size. (remote_insert_hw_breakpoint): Likewise. * score-tdep.c: Likewise. * sh-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * v850-tdep.c: Likewise. * xtensa-tdep.c: Likewise.
2016-11-03 22:35:13 +08:00
/* Skip verify of sw_breakpoint_from_kind, invalid_p == 0 */
/* Skip verify of breakpoint_kind_from_current_state, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of adjust_breakpoint_address, has predicate. */
/* Skip verify of memory_insert_breakpoint, invalid_p == 0 */
/* Skip verify of memory_remove_breakpoint, invalid_p == 0 */
/* Skip verify of decr_pc_after_break, invalid_p == 0 */
/* Skip verify of deprecated_function_start_offset, invalid_p == 0 */
* Makefile.in (arm-tdep.o, eval.o, target-descriptions.o) (xml-tdesc.o): Update. * xml-support.c: Add a comment. (gdb_xml_enums_boolean): New variable. (gdb_xml_parse_attr_enum): Use strcasecmp. * xml-support.h (gdb_xml_enums_boolean): Declare. * xml-tdesc.c (struct tdesc_parsing_data): Record current_feature, next_regnum, and current_union. (tdesc_start_feature, tdesc_start_reg, tdesc_start_union) (tdesc_end_union, tdesc_start_field, tdesc_start_vector) (field_attributes, union_children, reg_attributes, union_attributes) (vector_attributes, feature_attributes, feature_children): New. (target_children): Make static. Add <feature>. (tdesc_elements): Make static. * target-descriptions.c (struct tdesc_reg, tdesc_reg_p, type_p) (struct tdesc_feature, tdesc_feature_p): New types. (struct target_desc): Add features member. (struct tdesc_arch_data, tdesc_data): New. (target_find_description): Clarify error message. Warn about ignored register descriptions. (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_data_init, tdesc_data_alloc) (tdesc_data_cleanup, tdesc_numbered_register) (tdesc_numbered_register_choices, tdesc_find_register) (tdesc_register_name, tdesc_register_type) (tdesc_remote_register_number, tdesc_register_reggroup_p) (set_tdesc_pseudo_register_name, set_tdesc_pseudo_register_type) (set_tdesc_pseudo_register_reggroup_p, tdesc_use_registers) (tdesc_free_reg, tdesc_create_reg, tdesc_free_feature) (tdesc_create_feature, tdesc_record_type): New. (free_target_description): Free features. (_initialize_target_descriptions): Initialize tdesc_data. * arch-utils.c (default_remote_register_number): New. * arch-utils.h (default_remote_register_number): New prototype. * target-descriptions.h (set_tdesc_pseudo_register_name) (set_tdesc_pseudo_register_type, set_tdesc_pseudo_register_reggroup_p) (tdesc_use_registers, tdesc_data_alloc, tdesc_data_cleanup) (tdesc_numbered_register, tdesc_numbered_register_choices) (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_create_feature, tdesc_record_type) (tdesc_create_reg): Declare. * gdbarch.sh (remote_register_number): New entry. * gdbarch.c, gdbarch.h: Regenerate. * remote.c (init_remote_state): Use gdbarch_remote_register_number. * features/gdb-target.dtd: Add feature, reg, vector, union, and field. * arm-tdep.c (arm_register_aliases): New. (arm_register_name_strings): Rename to... (arm_register_names): ...this. Make const. Delete the old version. (current_option, arm_register_byte): Delete. (set_disassembly_style): Simplify. Do not adjust arm_register_names. (value_of_arm_user_reg): New. (arm_gdbarch_init): Verify any described registers. Call tdesc_use_registers. Don't use arm_register_byte. Create aliases for standard register names. (_initialize_arm_tdep): Do not adjust arm_register_names. * user-regs.c (struct user_reg): Add baton member. (append_user_reg, user_reg_add_builtin, user_regs_init) (user_reg_add, value_of_user_reg): Use a baton for user register functions. * std-regs.c: Update. * user-regs.h (user_reg_read_ftype, user_reg_add_builtin) (user_reg_add): Add baton argument. * NEWS: Mention target description register support. * features/arm-core.xml, features/arm-fpa.xml: New. * eval.c (evaluate_subexp_standard): Allow ptype $register when the program is not running. * gdb.texinfo (-target-disconnect): Use @smallexample. (Requirements): Add anchor for Expat. Update description. (Target Descriptions): Mention Expat. (Target Description Format): Document new elements. Use @smallexample. (Predefined Target Types, Standard Target Features): New sections. * doc/gdbint.texinfo (Target Descriptions): New section. * gdb.xml/single-reg.xml, gdb.xml/tdesc-regs.exp, gdb.xml/core-only.xml, gdb.xml/extra-regs.xml: New files.
2007-02-09 05:00:36 +08:00
/* Skip verify of remote_register_number, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of fetch_tls_load_module_address, has predicate. */
/* Skip verify of frame_args_skip, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of unwind_pc, has predicate. */
/* Skip verify of unwind_sp, has predicate. */
/* Skip verify of frame_num_args, has predicate. */
/* Skip verify of frame_align, has predicate. */
/* Skip verify of stabs_argument_has_addr, invalid_p == 0 */
/* Skip verify of convert_from_func_ptr_addr, invalid_p == 0 */
2001-06-16 06:10:21 +08:00
/* Skip verify of addr_bits_remove, invalid_p == 0 */
Clear non-significant bits of address on memory access ARMv8 supports tagged address, that is, the top one byte in address is ignored. It is always enabled on aarch64-linux. See https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt The tag in the tagged address is modeled as non-significant bits in address, so this patch adds a new gdbarch method significant_addr_bit and clear the non-significant bits (the top byte in ARMv8) of the virtual address at the point before passing address to target cache layer. IOW, the address used in the target cache layer is already cleared. Before this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: Cannot access memory at address 0xf000000000411030 After this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: 0x00000000 Note that I used address_significant in paddress, but it causes a regression gdb.base/long_long.exp, because gdb clears the non-significant bits in address, but test still expects them. p/a val.oct^M $24 = 0x2ee53977053977^M (gdb) FAIL: gdb.base/long_long.exp: p/a val.oct so I defer the change there. gdb: 2017-12-08 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_gdbarch_init): Install gdbarch significant_addr_bit. * gdbarch.sh (significant_addr_bit): New. * gdbarch.c, gdbarch.h: Re-generated. * target.c (memory_xfer_partial): Call address_significant. * utils.c (address_significant): New function. * utils.h (address_significant): Declare. 2017-12-08 Yao Qi <yao.qi@linaro.org> gdb/testsuite: * gdb.arch/aarch64-tagged-pointer.c: New file. * gdb.arch/aarch64-tagged-pointer.exp: New file.
2017-12-09 01:27:03 +08:00
if (gdbarch->significant_addr_bit == 0)
gdbarch->significant_addr_bit = gdbarch_addr_bit (gdbarch);
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of software_single_step, has predicate. */
/* Skip verify of single_step_through_delay, has predicate. */
Delegate opcodes to select disassembler in GDB This patch changes GDB to use disassembler selected by opcodes in default, so that we don't have to duplicate the selection logic again in GDB side. For example, gdb/score-tdep.c has static int score_print_insn (bfd_vma memaddr, struct disassemble_info *info) { if (info->endian == BFD_ENDIAN_BIG) return print_insn_big_score (memaddr, info); else return print_insn_little_score (memaddr, info); } and opcodes/disassemble.c has the same logic, case bfd_arch_score: if (big) disassemble = print_insn_big_score; else disassemble = print_insn_little_score; This patch removes the logic in GDB and calls opcodes/disassemble.c:disassembler in default to select disassembler. gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * alpha-tdep.c (alpha_gdbarch_init): Don't call set_gdbarch_print_insn. * arc-tdep.c (arc_gdbarch_init): Likewise. * arch-utils.c: include dis-asm.h. (default_print_insn): New function. * arch-utils.h (default_print_insn): Declare. * avr-tdep.c (avr_gdbarch_init): Don't call set_gdbarch_print_insn. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cris-tdep.c (cris_delayed_get_disassembler): Remove. (cris_gdbarch_init): Don't call set_gdbarch_print_insn. * frv-tdep.c (frv_gdbarch_init): Likewise. * ft32-tdep.c (ft32_gdbarch_init): Likewise. * gdbarch.sh (print_insn): Use default_print_insn. * gdbarch.c: Regenerated. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * iq2000-tdep.c (iq2000_gdbarch_init): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * m68hc11-tdep.c (gdb_print_insn_m68hc11): Remove. (m68hc11_gdbarch_init): Don't call set_gdbarch_print_insn. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_gdbarch_init): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * nios2-tdep.c (nios2_print_insn): Remove. (nios2_gdbarch_init): Don't call set_gdbarch_print_insn. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * score-tdep.c (score_print_insn): Remove. (score_gdbarch_init): Don't call set_gdbarch_print_insn. * sh-tdep.c (sh_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * tic6x-tdep.c (tic6x_print_insn): Remove. (tic6x_gdbarch_init): Don't call set_gdbarch_print_insn. * tilegx-tdep.c (tilegx_gdbarch_init): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * vax-tdep.c (vax_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
2017-05-25 00:23:52 +08:00
/* Skip verify of print_insn, invalid_p == 0 */
/* Skip verify of skip_trampoline_code, invalid_p == 0 */
/* Skip verify of skip_solib_resolver, invalid_p == 0 */
/* Skip verify of in_solib_return_trampoline, invalid_p == 0 */
infrun: step through indirect branch thunks With version 7.3 GCC supports new options -mindirect-branch=<choice> -mfunction-return=<choice> The choices are: keep behaves as before thunk jumps through a thunk thunk-external jumps through an external thunk thunk-inline jumps through an inlined thunk For thunk and thunk-external, GDB would, on a call to the thunk, step into the thunk and then resume to its caller assuming that this is an undebuggable function. On a return thunk, GDB would stop inside the thunk. Make GDB step through such thunks instead. Before: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) 30 } After: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) inc (x=41) at gdb.base/step-indirect-call-thunk.c:23 23 return x + 1; This is independent of the step-mode. In order to step into the thunk, you would need to use stepi. When stepping over an indirect call thunk, GDB would first step through the thunk, then recognize that it stepped into a sub-routine and resume to the caller (of the thunk). Not sure whether this is worth optimizing. Thunk detection is implemented via gdbarch. I implemented the methods for IA. Other architectures may run into unexpected fails. The tests assume a fixed number of instruction steps to reach a thunk. This depends on the compiler as well as the architecture. They may need adjustments when we add support for more architectures. Or we can simply drop those tests that cover being able to step into thunks using instruction stepping. When using an older GCC, the tests will fail to build and will be reported as untested: Running .../gdb.base/step-indirect-call-thunk.exp ... gdb compile failed, \ gcc: error: unrecognized command line option '-mindirect-branch=thunk' gcc: error: unrecognized command line option '-mfunction-return=thunk' === gdb Summary === # of untested testcases 1 gdb/ * infrun.c (process_event_stop_test): Call gdbarch_in_indirect_branch_thunk. * gdbarch.sh (in_indirect_branch_thunk): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * x86-tdep.h: New. * x86-tdep.c: New. * Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o. (HFILES_NO_SRCDIR): Add x86-tdep.h. (ALLDEPFILES): Add x86-tdep.c. * arch-utils.h (default_in_indirect_branch_thunk): New. * arch-utils.c (default_in_indirect_branch_thunk): New. * i386-tdep: Include x86-tdep.h. (i386_in_indirect_branch_thunk): New. (i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch function. * amd64-tdep: Include x86-tdep.h. (amd64_in_indirect_branch_thunk): New. (amd64_init_abi): Set in_indirect_branch_thunk gdbarch function. testsuite/ * gdb.base/step-indirect-call-thunk.exp: New. * gdb.base/step-indirect-call-thunk.c: New. * gdb.reverse/step-indirect-call-thunk.exp: New. * gdb.reverse/step-indirect-call-thunk.c: New.
2018-02-14 21:30:57 +08:00
/* Skip verify of in_indirect_branch_thunk, invalid_p == 0 */
/* Skip verify of stack_frame_destroyed_p, invalid_p == 0 */
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
/* Skip verify of elf_make_msymbol_special, has predicate. */
/* Skip verify of coff_make_msymbol_special, invalid_p == 0 */
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
/* Skip verify of make_symbol_special, invalid_p == 0 */
/* Skip verify of adjust_dwarf2_addr, invalid_p == 0 */
/* Skip verify of adjust_dwarf2_line, invalid_p == 0 */
/* Skip verify of cannot_step_breakpoint, invalid_p == 0 */
/* Skip verify of have_nonsteppable_watchpoint, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of address_class_type_flags, has predicate. */
/* Skip verify of address_class_type_flags_to_name, has predicate. */
[gdbarch] New method "execute_dwarf_cfa_vendor_op" and migrate SPARC to it Recently a feature called "return address signing" has been added to GCC to prevent stack smash stack on AArch64. For details please refer: https://gcc.gnu.org/ml/gcc-patches/2017-01/msg00376.html GDB needs to be aware of this feature so it can restore the original return address which is critical for unwinding. On compiler side, whenever return address, i.e. LR register, is mangled or restored by hardware instruction, compiler is expected to generate a DW_CFA_AARCH64_negate_ra_state to toggle return address signing status. DW_CFA_AARCH64_negate_ra_state is using the same CFI number and therefore need to be multiplexed with DW_CFA_GNU_window_save which was designed for SPARC. A new gdbarch method "execute_dwarf_cfa_vendor_op" is introduced by this patch. It's parameters has been restricted to those only needed by SPARC and AArch64 for multiplexing DW_CFA_GNU_window_save which is a CFI operation takes none operand. Should any further DWARF CFI operation want to be multiplexed in the future, the parameter list can be extended. Below is the current function prototype. typedef int (gdbarch_execute_dwarf_cfa_vendor_op_ftype) (struct gdbarch *gdbarch, gdb_byte op, struct dwarf2_frame_state *fs); DW_CFA_GNU_window_save support for SPARC is migrated to this new gdbarch method by this patch. gdb/ * gdbarch.sh: New gdbarch method execute_dwarf_cfa_vendor_op. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * dwarf2-frame.c (dwarf2_frame_state_alloc_regs): Made the visibility external. (execute_cfa_program): Call execute_dwarf_cfa_vendor_op for CFI between DW_CFA_lo_user and DW_CFA_high_user inclusive. (enum cfa_how_kind): Move to ... (struct dwarf2_frame_state_reg_info): Likewise. (struct dwarf2_frame_state): Likewise. * dwarf2-frame.h: ... here. (dwarf2_frame_state_alloc_regs): New declaration. * sparc-tdep.c (sparc_execute_dwarf_cfa_vendor_op): New function. (sparc32_gdbarch_init): Register execute_dwarf_cfa_vendor_op hook.
2017-04-26 21:05:03 +08:00
/* Skip verify of execute_dwarf_cfa_vendor_op, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of address_class_name_to_type_flags, has predicate. */
/* Skip verify of register_reggroup_p, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of fetch_pointer_argument, has predicate. */
Replace 'core_regset_sections' by iterator method The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator.
2014-09-04 23:26:43 +08:00
/* Skip verify of iterate_over_regset_sections, has predicate. */
* gdbarch.sh (make_corefile_notes): New architecture callback. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes before target_make_corefile_notes. If NULL is returned, the target does not support core file generation. * linux-nat.c: Include "linux-tdep.h". (find_signalled_thread, find_stop_signal): Remove. (linux_nat_do_thread_registers): Likewise. (struct linux_nat_corefile_thread_data): Likewise. (linux_nat_corefile_thread_callback): Likewise. (iterate_over_spus): Likewise. (struct linux_spu_corefile_data): Likewise. (linux_spu_corefile_callback): Likewise. (linux_spu_make_corefile_notes): Likewise. (linux_nat_collect_thread_registers): New function. (linux_nat_make_corefile_notes): Replace contents by call to linux_make_corefile_notes passing linux_nat_collect_thread_registers as native-only callback. * linux-tdep.h: Include "bfd.h". (struct regcache): Add forward declaration. (linux_collect_thread_registers_ftype): New typedef. (linux_make_corefile_notes): Add prototype. * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h", "regset.h", and "elf-bfd.h". (find_signalled_thread, find_stop_signal): New functions. (linux_spu_make_corefile_notes): Likewise. (linux_collect_thread_registers): Likewise. (struct linux_corefile_thread_data): New data structure. (linux_corefile_thread_callback): New funcion. (linux_make_corefile_notes): Likewise. (linux_make_corefile_notes_1): Likewise. (linux_init_abi): Install it.
2012-01-20 17:56:56 +08:00
/* Skip verify of make_corefile_notes, has predicate. */
/* Skip verify of find_memory_regions, has predicate. */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of core_xfer_shared_libraries, has predicate. */
ppc-aix core file relocation. The current code attempts to provide relocation support when debugging core files via the rs6000_xfer_partial method of the rs6000-nat target_ops vector. However, this target_ops vector does not get pushed on the target stack at all when debugging core files, thus bypassing completely that part of the code. This patch fixes the problem by extending corelow's core_xfer_partial into handling the TARGET_OBJECT_LIBRARIES_AIX object. gdb/ChangeLog: * gdbarch.sh (core_xfer_shared_libraries_aix): New method. * gdbarch.h, gdbarch.c: Regenerate. * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX handling. * rs6000-aix-tdep.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h. * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and "xml-utils.h". (struct field_info, struct ld_info_desc): New types. (ld_info32_desc, ld_info64_desc): New static constants. (struct ld_info): New type. (rs6000_aix_extract_ld_info): New function. (rs6000_aix_shared_library_to_xml): Likewise. (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. (rs6000_aix_init_osabi): Add call to set_gdbarch_core_xfer_shared_libraries_aix. * rs6000-nat.c: Add "rs6000-aix-tdep.h" include. Remove "xml-utils.h" include. (LdInfo): Delete typedef. (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME): Delete macros. (rs6000_ptrace_ldinfo): Change return type to gdb_byte *. Adjust code accordingly. (rs6000_core_ldinfo): Delete, folded into rs6000_aix_core_xfer_shared_libraries_aix. (rs6000_xfer_shared_library): Delete. (rs6000_xfer_shared_libraries): Reimplement.
2013-05-15 20:26:14 +08:00
/* Skip verify of core_xfer_shared_libraries_aix, has predicate. */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of core_pid_to_str, has predicate. */
/* Skip verify of core_thread_name, has predicate. */
/* Skip verify of core_xfer_siginfo, has predicate. */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of gcore_bfd_target, has predicate. */
* NEWS: Mention pointer to member improvements. * Makefile.in (gnu-v3-abi.o): Delete special rule. (eval.o, gnu-v3-abi.o, ia64-tdep.o): Update. * ada-valprint.c (ada_print_scalar): Update for new type codes. * c-typeprint.c (c_print_type): Update for new type codes. (c_type_print_varspec_prefix, c_type_print_varspec_suffix) (c_type_print_base): Likewise. (c_type_print_args): Rewrite. * c-valprint.c (c_val_print): Update for new type codes. Remove support for references to members. Treat methods like functions. * cp-abi.c (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New. * cp-abi.h (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New prototypes. (struct cp_abi_ops): Add corresponding members. * cp-valprint.c (cp_print_class_method): Delete. (cp_find_class_member): New function. (cp_print_class_member): Use it. Simplify support for bogus member pointers. * dwarf2read.c (quirk_gcc_member_function_pointer): Use lookup_methodptr_type. (read_tag_ptr_to_member_type): Likewise, and lookup_memberptr_type. * eval.c (evaluate_subexp_standard): Implement EVAL_SKIP for OP_SCOPE. Update call to value_aggregate_elt. Rewrite member pointer support. (evaluate_subexp_for_address): Handle OP_SCOPE explicitly. Handle references returned by user defined operators. * f-typeprint.c (f_print_type, f_type_print_varspec_prefix) (f_type_print_varspec_suffix): Remove support for member pointers. * gdbtypes.c (lookup_memberptr_type): Renamed from lookup_member_type and adjusted. (smash_to_memberptr_type): Likewise, from smash_to_member_type. (lookup_methodptr_type): New. (rank_one_type): Adjust for TYPE_CODE_MEMBERPTR. (recursive_dump_type): Update for new types. * gdbtypes.h (enum type_code): Replace TYPE_CODE_MEMBER with TYPE_CODE_MEMBERPTR and TYPE_CODE_METHODPTR. (lookup_memberptr_type, lookup_methodptr_type) (smash_to_memberptr_type): New prototypes. (smash_to_method_type): Formatting fix. (lookup_member_type, smash_to_member_type): Delete prototypes. * gnu-v3-abi.c (gnuv3_get_vtable, gnuv3_get_virtual_fn): New. Do not rely on debug information for the vptr or the method's enclosing type. Handle function descriptors for IA64. (gnuv3_virtual_fn_field): Rewrite using the new functions. (gnuv3_find_method_in, gnuv3_print_method_ptr) (gnuv3_method_ptr_size, gnuv3_make_method_ptr) (gnuv3_method_ptr_to_value): New. (init_gnuv3_ops): Set new members of gnu_v3_abi_ops. * hpread.c (hpread_type_lookup): Update for new types. * infcall.c (value_arg_coerce): Likewise. * m2-typeprint.c (m2_print_type): Remove explicit support for member pointers. * m2-valprint.c (m2_val_print): Likewise. * p-typeprint.c (pascal_type_print_varspec_prefix) (pascal_type_print_varspec_suffix, pascal_type_print_base): Likewise. * p-valprint.c (pascal_val_print): Likewise. (pascal_object_print_class_method, pascal_object_print_class_member): Delete. * p-lang.h (pascal_object_print_class_method) (pascal_object_print_class_member): Delete prototypes. * stabsread.c (read_type): Update for new types. * typeprint.c (print_type_scalar): Likewise. * valops.c (value_struct_elt_for_reference, value_namespace_elt) (value_maybe_namespace_elt, value_aggregate_elt): Add want_address argument. Construct a pointer to member if the address of a function or data member is requested. (value_cast_pointers): Don't modify the input value. (value_cast): Adjust pointer to member handling for new types. Allow null pointer to member constants. Don't modify the input value. (value_ind): Remove pointer to member check. Handle function descriptors for function pointers. (value_struct_elt, value_find_oload_method_list, check_field): Remove pointer to member checks. * value.c (unpack_long): Allow pointers to data members. (value_from_longest): Allow member pointers. * value.h (value_aggregate_elt): Add want_address. * varobj.c (c_variable_editable): Remove check for members. * gdbarch.sh: Add vtable_function_descriptors and vbit_in_delta. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Handle descriptors in virtual tables. (ia64_gdbarch_init): Call set_gdbarch_vtable_function_descriptors. * c-lang.h (cp_print_class_method): Delete prototype. * arm-tdep.c (arm_gdbarch_init): Call set_gdbarch_vbit_in_delta. * mips-tdep.c (mips_gdbarch_init): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * gdb.cp/classes.exp (test_pointers_to_class_members): Update expected output. Test the types of members and member pointers. * gdb.cp/inherit.exp (test_print_mi_member_types): Remove KFAILs for gdb/2092. * gdb.cp/member-ptr.exp: Search for a comment instead of a statement. Enable for GCC. Update expected output for some tests and add new tests. Remove obsolete GCC KFAILs. Allow GCC's class layout. * gdb.cp/member-ptr.cc (Padding, Padding::vspacer, Base, Base::get_x) (Base::vget_base, Left, Left::vget, Right, Right::vget, Diamond) (Diamond::vget_base): New. (main): Add new tests. * gdb.cp/printmethod.exp: Update expected output for member functions. * gdb.cp/virtfunc.exp (test_virtual_calls): Add a KFAIL for print pEe->D::vg().
2007-01-04 02:05:45 +08:00
/* Skip verify of vtable_function_descriptors, invalid_p == 0 */
/* Skip verify of vbit_in_delta, invalid_p == 0 */
add a default method for gdbarch_skip_permanent_breakpoint breakpoint.c uses gdbarch_breakpoint_from_pc to determine whether a breakpoint location points at a permanent breakpoint: static int bp_loc_is_permanent (struct bp_location *loc) { ... addr = loc->address; bpoint = gdbarch_breakpoint_from_pc (loc->gdbarch, &addr, &len); ... if (target_read_memory (loc->address, target_mem, len) == 0 && memcmp (target_mem, bpoint, len) == 0) retval = 1; ... So I think we should default the gdbarch_skip_permanent_breakpoint hook to advancing the PC by the length of the breakpoint instruction, as determined by gdbarch_breakpoint_from_pc. I believe that simple implementation does the right thing for most architectures. If there's an oddball architecture where that doesn't work, then it should override the hook, just like it should be overriding the hook if there was no default anyway. The only two implementation of skip_permanent_breakpoint are i386_skip_permanent_breakpoint, for x86, and hppa_skip_permanent_breakpoint, for PA-RISC/HP-UX The x86 implementation is trivial, and can clearly be replaced by the new default. I don't know about the HP-UX one though, I know almost nothing about PA. It may well be advancing the PC ends up being equivalent. Otherwise, it must be that "jump $pc_after_bp" doesn't work either... Tested on x86_64 Fedora 20 native and gdbserver. gdb/ 2014-11-12 Pedro Alves <palves@redhat.com> * arch-utils.c (default_skip_permanent_breakpoint): New function. * arch-utils.h (default_skip_permanent_breakpoint): New declaration. * gdbarch.sh (skip_permanent_breakpoint): Now an 'f' function. Install default_skip_permanent_breakpoint as default method. * i386-tdep.c (i386_skip_permanent_breakpoint): Delete function. (i386_gdbarch_init): Don't install it. * infrun.c (resume): Assume there's always a gdbarch_skip_permanent_breakpoint implementation. * gdbarch.h, gdbarch.c: Regenerate.
2014-11-12 18:10:48 +08:00
/* Skip verify of skip_permanent_breakpoint, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of max_insn_length, has predicate. */
/* Skip verify of displaced_step_copy_insn, has predicate. */
/* Skip verify of displaced_step_hw_singlestep, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of displaced_step_fixup, has predicate. */
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
if ((! gdbarch->displaced_step_location) != (! gdbarch->displaced_step_copy_insn))
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.puts ("\n\tdisplaced_step_location");
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of relocate_instruction, has predicate. */
/* Skip verify of overlay_update, has predicate. */
/* Skip verify of core_read_description, has predicate. */
/* Skip verify of static_transform_name, has predicate. */
* gdbarch.sh (sofun_address_maybe_missing): New gdbarch variable. * gdbarch.c, gdbarch.h: Regenerate. * dbxread.c (find_stab_function_addr): Define unconditionally. (read_dbx_symtab): Use gdbarch_sofun_address_maybe_missing instead of SOFUN_ADDRESS_MAYBE_MISSING. (end_psymtab): Likewise. (process_one_symbol): Likewise. * mdebugread.c (parse_partial_symbols): Likewise. * symtab.h (struct minimal_symbol): Always define "filename" member. * elfread.c (elf_symtab_read): Use msym->filename unconditionally. * minsyms.c (lookup_minimal_symbol): Likewise. * symmisc.c (dump_msymbols): Likewise. * config/i386/i386sol2.mt (DEPRECATED_TM_FILE): Remove. * config/i386/linux.mt (DEPRECATED_TM_FILE): Remove. * config/i386/tm-i386sol2.h: Remove file. * config/i386/tm-linux.h: Remove file. * i386-linux-tdep.c (i386_linux_init_abi): Add call to set_gdbarch_sofun_address_maybe_missing. * i386-sol2-tdep.c (i386_sol2_init_abi): Likewise. * config/powerpc/linux.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/nbsd.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/ppc-eabi.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/ppc-sim.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/tm-ppc-eabi.h: Remove file. * rs6000-tdep.c (rs6000_gdbarch_init): Add call to set_gdbarch_sofun_address_maybe_missing. * config/sparc/sol2-64.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/sol2.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/tm-sol2.h: Remove file. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Add call to set_gdbarch_sofun_address_maybe_missing. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Likewise. doc/ChangeLog: * gdbarch.texi (Target Conditionals): Remove documentation of SOFUN_ADDRESS_MAYBE_MISSING, replaced by ... (Compiler Characteristics): ... documentation of set_gdbarch_sofun_address_maybe_missing.
2007-10-19 20:26:35 +08:00
/* Skip verify of sofun_address_maybe_missing, invalid_p == 0 */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of process_record, has predicate. */
/* Skip verify of process_record_signal, has predicate. */
/* Skip verify of gdb_signal_from_target, has predicate. */
This patch implements the new gdbarch method gdbarch_gdb_signal_to_target. It will be used when one wants to convert between the internal GDB signal representation (enum gdb_signal) and the target's representation. The idea of this patch came from a chat between Pedro and I on IRC, plus the discussion of my patches to add the new $_exitsignal convenience variable: <http://sourceware.org/ml/gdb-patches/2013-06/msg00452.html> <http://sourceware.org/ml/gdb-patches/2013-06/msg00352.html> What I did was to investigate, on the Linux kernel, which targets shared the signal numbers definition with the generic definition, present at <include/uapi/asm-generic/signal.h>. For the record, I used linux-3.10-rc7 as the main source of information, always looking at <arch/<ARCH_NAME>/include/uapi/asm/signal.h>. For SIGRTMAX (which defaults to _NSIG in most cases), I had to look at different signal-related files, but most of them (except MIPS) were defined to 64 anyway. Then, with all the differences in hand, I implemented the bits on each target. 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com> * linux-tdep.c: Define enum with generic signal numbers. (linux_gdb_signal_from_target): New function. (linux_gdb_signal_to_target): Likewise. (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target methods to the functions above. * linux-tdep.h (linux_gdb_signal_from_target): New prototype. (linux_gdb_signal_to_target): Likewise. * alpha-linux-tdep.c: Define new enum with signals different from generic Linux kernel. (alpha_linux_gdb_signal_from_target): New function. (alpha_linux_gdb_signal_to_target): Likewise. (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target with the functions mentioned above. * avr-tdep.c: Define enum with differences between Linux kernel and AVR signals. (avr_linux_gdb_signal_from_target): New function. (avr_linux_gdb_signal_to_target): Likewise. (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to the functions mentioned above. * sparc-linux-tdep.c: Define enum with differences between SPARC and generic Linux kernel signal numbers. (sparc32_linux_gdb_signal_from_target): New function. (sparc32_linux_gdb_signal_to_target): Likewise. (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target to the functions defined above. * xtensa-linux-tdep.c: Define enum with differences between Xtensa and Linux kernel generic signals. (xtensa_linux_gdb_signal_from_target): New function. (xtensa_linux_gdb_signal_to_target): Likewise. (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target to the functions defined above. * mips-linux-tdep.c: Define enum with differences between signals in MIPS and Linux kernel generic ones. (mips_gdb_signal_to_target): New function. (mips_gdb_signal_from_target): Redefine to use new enum, handle only different signals from the Linux kernel generic. (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target the functions defined above. * mips-linux-tdep.h (enum mips_signals): Remove.
2013-08-10 00:54:43 +08:00
/* Skip verify of gdb_signal_to_target, has predicate. */
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Skip verify of get_siginfo_type, has predicate. */
/* Skip verify of record_special_symbol, has predicate. */
/* Skip verify of get_syscall_number, has predicate. */
Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead of global This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function.
2014-11-21 01:28:18 +08:00
/* Skip verify of xml_syscall_file, invalid_p == 0 */
/* Skip verify of syscalls_info, invalid_p == 0 */
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
/* Skip verify of stap_integer_prefixes, invalid_p == 0 */
/* Skip verify of stap_integer_suffixes, invalid_p == 0 */
/* Skip verify of stap_register_prefixes, invalid_p == 0 */
/* Skip verify of stap_register_suffixes, invalid_p == 0 */
/* Skip verify of stap_register_indirection_prefixes, invalid_p == 0 */
/* Skip verify of stap_register_indirection_suffixes, invalid_p == 0 */
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
/* Skip verify of stap_gdb_register_prefix, invalid_p == 0 */
/* Skip verify of stap_gdb_register_suffix, invalid_p == 0 */
/* Skip verify of stap_is_single_operand, has predicate. */
/* Skip verify of stap_parse_special_token, has predicate. */
/* Skip verify of dtrace_parse_probe_argument, has predicate. */
/* Skip verify of dtrace_probe_is_enabled, has predicate. */
/* Skip verify of dtrace_enable_probe, has predicate. */
/* Skip verify of dtrace_disable_probe, has predicate. */
/* Skip verify of has_global_solist, invalid_p == 0 */
/* Skip verify of has_global_breakpoints, invalid_p == 0 */
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 17:51:43 +08:00
/* Skip verify of has_shared_address_space, invalid_p == 0 */
Add fast tracepoints. * arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-06 12:20:27 +08:00
/* Skip verify of fast_tracepoint_valid_at, invalid_p == 0 */
/* Skip verify of guess_tracepoint_registers, invalid_p == 0 */
gdb 2010-03-05 Corinna Vinschen <vinschen@redhat.com> Tom Tromey <tromey@redhat.com> * utils.c (host_char_to_target): Add 'gdbarch' argument. (parse_escape): Likewise. * python/py-utils.c (unicode_to_target_string): Update. (unicode_to_target_python_string): Update. (target_string_to_unicode): Update. * printcmd.c (printf_command): Update. * p-exp.y (yylex): Update. * objc-exp.y (yylex): Update. * mi/mi-parse.c: Include charset.h. (mi_parse_escape): New function. (mi_parse_argv): Use it. * jv-exp.y (yylex): Update. * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New function. (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset. * gdbarch.sh (auto_charset, auto_wide_charset): New. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * defs.h (parse_escape): Update. * cli/cli-setshow.c: Include arch-utils.h. (do_setshow_command): Update. * cli/cli-cmds.c (echo_command): Update. * charset.h (target_charset, target_wide_charset): Update. * charset.c: Include arch-utils.h. (target_charset_name): Default to "auto". (target_wide_charset_name): Likewise. (show_target_charset_name): Handle "auto". (show_target_wide_charset_name): Likewise. (be_le_arch): New global. (set_be_le_names): Add 'gdbarch' argument. (validate): Likewise. Don't call set_be_le_names. (set_charset_sfunc, set_host_charset_sfunc) (set_target_charset_sfunc, set_target_wide_charset_sfunc): Update. (target_charset): Add 'gdbarch' argument. (target_wide_charset): Likewise. Remove 'byte_order' argument. (auto_target_charset_name): New global. (default_auto_charset, default_auto_wide_charset): New functions. (_initialize_charset): Set auto_target_charset_name. Allow "auto" for target charsets. Copy result of nl_langinfo. Use GetACP if USE_WIN32API. * c-lang.c (charset_for_string_type): Add 'gdbarch' argument, remove 'byte_order' argument. Update. (classify_type): Likewise. (c_emit_char): Update. (c_printchar): Update. (c_printstr): Update. (c_get_string): Update. (evaluate_subexp_c): Update. * arch-utils.h (default_auto_charset, default_auto_wide_charset): Declare. * python/python.c (gdbpy_target_charset): New function. (gdbpy_target_wide_charset): Likewise. (GdbMethods): Update. * NEWS: Update. gdb/doc * gdb.texinfo (Basic Python): Document target_charset and target_wide_charset. gdb/testsuite * gdb.python/py-prettyprint.py (pp_nullstr.to_string): Use gdb.target_charset. (pp_ns.to_string): Likewise.
2010-03-06 04:18:19 +08:00
/* Skip verify of auto_charset, invalid_p == 0 */
/* Skip verify of auto_wide_charset, invalid_p == 0 */
/* Skip verify of has_dos_based_file_system, invalid_p == 0 */
/* Skip verify of gen_return_address, invalid_p == 0 */
/* Skip verify of info_proc, has predicate. */
/* Skip verify of core_info_proc, has predicate. */
New "iterate_over_objfiles_in_search_order" gdbarch method. This patch introduces the "iterate_over_objfiles_in_search_order" gdbarch method, as well as its default implementation, and converts the areas where it will matter to using this gdbarch method. The default method implementation is the only one installed, and the changes should have no functional impact in terms of behavior. This only paves the way for the architectures that will need their own version. gdb/ChangeLog: * gdbarch.sh: Add generation of "iterate_over_objfiles_in_search_order_cb_ftype" typedef in gdbarch.h. Add include of "objfiles.h" in gdbarch.c. (iterate_over_objfiles_in_search_order): New gdbarch method. * gdbarch.h, gdbarch.c: Regenerate. * objfiles.h (default_iterate_over_objfiles_in_search_order): Add declaration. * objfiles.c (default_iterate_over_objfiles_in_search_order): New function. * symtab.c (lookup_symbol_aux_objfile): New function, extracted out of lookup_symbol_aux_symtabs. (lookup_symbol_aux_symtabs): Replace extracted-out code by call to lookup_symbol_aux_objfile. (struct global_sym_lookup_data): New type. (lookup_symbol_global_iterator_cb): New function. (lookup_symbol_global): Search for symbol using gdbarch_iterate_over_objfiles_in_search_order and lookup_symbol_global_iterator_cb. * findvar.c (struct minsym_lookup_data): New type. (minsym_lookup_iterator_cb): New function. (default_read_var_value) [case LOC_UNRESOLVED]: Resolve the symbol's address via gdbarch_iterate_over_objfiles_in_search_order and minsym_lookup_iterator_cb.
2012-06-05 21:50:50 +08:00
/* Skip verify of iterate_over_objfiles_in_search_order, invalid_p == 0 */
/* Skip verify of ravenscar_ops, invalid_p == 0 */
/* Skip verify of insn_is_call, invalid_p == 0 */
/* Skip verify of insn_is_ret, invalid_p == 0 */
/* Skip verify of insn_is_jump, invalid_p == 0 */
/* Skip verify of auxv_parse, has predicate. */
/* Skip verify of print_auxv_entry, invalid_p == 0 */
/* Skip verify of vsyscall_range, invalid_p == 0 */
/* Skip verify of infcall_mmap, invalid_p == 0 */
compile: Use also inferior munmap Currently inferior memory is allocated by inferior mmap() but it is never deallocated; despite the injected objfile incl. its symbols is freed. This was intentional so that one can do for example: inferior: char *str = "foo"; GDB: (gdb) compile code str = "bar"; I believe later patches will be needed to introduce full control over keeping vs. discarding the injected module as being discussed in: compile: objfiles lifetime UI https://sourceware.org/ml/gdb/2015-04/msg00051.html Message-ID: <20150429135735.GA16974@host1.jankratochvil.net> https://sourceware.org/ml/gdb/2015-05/msg00007.html As decided by Phil it is better not to leak inferior pages as users can workaround the issue above for example by: (gdb) compile code str = strdup ("bar"); I have checked that in fact gdb/doc/ (written by Phil) already expects the injected code will be unmapped so that does not need to be changed: compile code int ff = 5; p = &ff; In this example, @code{p} would point to @code{ff} when the @code{compile} command is executing the source code provided to it. However, as variables in the (example) program persist with their assigned values, the variable @code{p} would point to an invalid location when the command exists. gdb/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * arch-utils.c (default_infcall_munmap): New. * arch-utils.h (default_infcall_munmap): New declaration. * compile/compile-object-load.c (struct munmap_list, munmap_list_add) (munmap_list_free, munmap_listp_free_cleanup): New. (struct setup_sections_data): Add field munmap_list_headp. (setup_sections): Call munmap_list_add. (compile_object_load): New variable munmap_list_head, initialize setup_sections_data.munmap_list_headp, return munmap_list_head. * compile/compile-object-load.h (struct munmap_list): New declaration. (struct compile_module): Add field munmap_list_head. (munmap_list_free): New declaration. * compile/compile-object-run.c (struct do_module_cleanup): Add field munmap_list_head. (do_module_cleanup): Call munmap_list_free. (compile_object_run): Pass munmap_list_head to do_module_cleanup. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (infcall_munmap): New. * linux-tdep.c (linux_infcall_munmap): New. (linux_init_abi): Install it. gdb/testsuite/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.compile/compile.exp (keep jit in memory): Rename to ... (do not keep jit in memory): ... this. (expect 5): Change it to ... (expect no 5): ... this.
2015-06-04 03:22:56 +08:00
/* Skip verify of infcall_munmap, invalid_p == 0 */
/* Skip verify of gcc_target_options, invalid_p == 0 */
add gnu_triplet_regexp gdbarch method gdb has to inform libcc1.so of the target being used, so that the correct compiler can be invoked. The compiler is invoked using the GNU configury triplet prefix, e.g., "x86_64-unknown-linux-gnu-gcc". In order for this to work we need to map the gdbarch to the GNU configury triplet arch. In most cases these are identical; however, the x86 family poses some problems, as the BFD arch names are quite different from the GNU triplet names. So, we introduce a new gdbarch method for this. A regular expression is used because there are various valid values for the arch prefix in the triplet. This patch also updates the osabi code to associate a regular expression with the OS ABI. I have only added a concrete value for Linux. Note that the "-gnu" part is optional, at least on Fedora it is omitted from the installed GCC executable's name. gdb/ChangeLog 2014-12-12 Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * osabi.h (osabi_triplet_regexp): Declare. * osabi.c (struct osabi_names): New. (gdb_osabi_names): Change type to struct osabi_names. Update values. (gdbarch_osabi_name): Update. (osabi_triplet_regexp): New function. (osabi_from_tdesc_string, _initialize_gdb_osabi): Update. * i386-tdep.c (i386_gnu_triplet_regexp): New method. (i386_elf_init_abi, i386_go32_init_abi, i386_gdbarch_init): Call set_gdbarch_gnu_triplet_regexp. * gdbarch.sh (gnu_triplet_regexp): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_gnu_triplet_regexp): Declare. * arch-utils.c (default_gnu_triplet_regexp): New function.
2014-06-13 23:28:24 +08:00
/* Skip verify of gnu_triplet_regexp, invalid_p == 0 */
/* Skip verify of addressable_memory_unit_size, invalid_p == 0 */
GDB: Add support for the new set/show disassembler-options commands. This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-03-01 02:32:07 +08:00
/* Skip verify of disassembler_options, invalid_p == 0 */
/* Skip verify of valid_disassembler_options, invalid_p == 0 */
/* Skip verify of type_align, invalid_p == 0 */
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
if (!log.empty ())
internal_error (__FILE__, __LINE__,
2005-02-11 Andrew Cagney <cagney@gnu.org> Mark up error_no_arg, query, perror_with_name, complaint, and internal_error. * breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update. * cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update. * dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update. * exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update. * frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update. * gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update. * go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update. * i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update. * i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update. * infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update. * interps.c, language.c, linespec.c, linux-nat.c: Update. * m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update. * m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update. * macrotab.c, maint.c, mdebugread.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update. * mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update. * objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update. * parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update. * ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update. * regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update. * remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update. * s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update. * sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update. * solib-aix5.c, solib-svr4.c, solib.c, source.c: Update. * sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update. * symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update. * utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update. * win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update. * cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update. * cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update. * mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update. * tui/tui-file.c, tui/tui-interp.c: Update.
2005-02-12 02:13:55 +08:00
_("verify_gdbarch: the following are invalid ...%s"),
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 19:11:47 +08:00
log.c_str ());
1999-06-15 02:08:47 +08:00
}
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Print out the details of the current architecture. */
1999-06-15 02:08:47 +08:00
void
gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file)
1999-06-15 02:08:47 +08:00
{
const char *gdb_nm_file = "<not-defined>";
#if defined (GDB_NM_FILE)
gdb_nm_file = GDB_NM_FILE;
#endif
fprintf_unfiltered (file,
"gdbarch_dump: GDB_NM_FILE = %s\n",
gdb_nm_file);
fprintf_unfiltered (file,
"gdbarch_dump: addr_bit = %s\n",
plongest (gdbarch->addr_bit));
fprintf_unfiltered (file,
"gdbarch_dump: addr_bits_remove = <%s>\n",
host_address_to_string (gdbarch->addr_bits_remove));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_address_class_name_to_type_flags_p() = %d\n",
gdbarch_address_class_name_to_type_flags_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: address_class_name_to_type_flags = <%s>\n",
host_address_to_string (gdbarch->address_class_name_to_type_flags));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_address_class_type_flags_p() = %d\n",
gdbarch_address_class_type_flags_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: address_class_type_flags = <%s>\n",
host_address_to_string (gdbarch->address_class_type_flags));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_address_class_type_flags_to_name_p() = %d\n",
gdbarch_address_class_type_flags_to_name_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: address_class_type_flags_to_name = <%s>\n",
host_address_to_string (gdbarch->address_class_type_flags_to_name));
fprintf_unfiltered (file,
"gdbarch_dump: address_to_pointer = <%s>\n",
host_address_to_string (gdbarch->address_to_pointer));
fprintf_unfiltered (file,
"gdbarch_dump: addressable_memory_unit_size = <%s>\n",
host_address_to_string (gdbarch->addressable_memory_unit_size));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_adjust_breakpoint_address_p() = %d\n",
gdbarch_adjust_breakpoint_address_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: adjust_breakpoint_address = <%s>\n",
host_address_to_string (gdbarch->adjust_breakpoint_address));
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: adjust_dwarf2_addr = <%s>\n",
host_address_to_string (gdbarch->adjust_dwarf2_addr));
fprintf_unfiltered (file,
"gdbarch_dump: adjust_dwarf2_line = <%s>\n",
host_address_to_string (gdbarch->adjust_dwarf2_line));
gdb 2010-03-05 Corinna Vinschen <vinschen@redhat.com> Tom Tromey <tromey@redhat.com> * utils.c (host_char_to_target): Add 'gdbarch' argument. (parse_escape): Likewise. * python/py-utils.c (unicode_to_target_string): Update. (unicode_to_target_python_string): Update. (target_string_to_unicode): Update. * printcmd.c (printf_command): Update. * p-exp.y (yylex): Update. * objc-exp.y (yylex): Update. * mi/mi-parse.c: Include charset.h. (mi_parse_escape): New function. (mi_parse_argv): Use it. * jv-exp.y (yylex): Update. * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New function. (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset. * gdbarch.sh (auto_charset, auto_wide_charset): New. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * defs.h (parse_escape): Update. * cli/cli-setshow.c: Include arch-utils.h. (do_setshow_command): Update. * cli/cli-cmds.c (echo_command): Update. * charset.h (target_charset, target_wide_charset): Update. * charset.c: Include arch-utils.h. (target_charset_name): Default to "auto". (target_wide_charset_name): Likewise. (show_target_charset_name): Handle "auto". (show_target_wide_charset_name): Likewise. (be_le_arch): New global. (set_be_le_names): Add 'gdbarch' argument. (validate): Likewise. Don't call set_be_le_names. (set_charset_sfunc, set_host_charset_sfunc) (set_target_charset_sfunc, set_target_wide_charset_sfunc): Update. (target_charset): Add 'gdbarch' argument. (target_wide_charset): Likewise. Remove 'byte_order' argument. (auto_target_charset_name): New global. (default_auto_charset, default_auto_wide_charset): New functions. (_initialize_charset): Set auto_target_charset_name. Allow "auto" for target charsets. Copy result of nl_langinfo. Use GetACP if USE_WIN32API. * c-lang.c (charset_for_string_type): Add 'gdbarch' argument, remove 'byte_order' argument. Update. (classify_type): Likewise. (c_emit_char): Update. (c_printchar): Update. (c_printstr): Update. (c_get_string): Update. (evaluate_subexp_c): Update. * arch-utils.h (default_auto_charset, default_auto_wide_charset): Declare. * python/python.c (gdbpy_target_charset): New function. (gdbpy_target_wide_charset): Likewise. (GdbMethods): Update. * NEWS: Update. gdb/doc * gdb.texinfo (Basic Python): Document target_charset and target_wide_charset. gdb/testsuite * gdb.python/py-prettyprint.py (pp_nullstr.to_string): Use gdb.target_charset. (pp_ns.to_string): Likewise.
2010-03-06 04:18:19 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: auto_charset = <%s>\n",
host_address_to_string (gdbarch->auto_charset));
fprintf_unfiltered (file,
"gdbarch_dump: auto_wide_charset = <%s>\n",
host_address_to_string (gdbarch->auto_wide_charset));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_auxv_parse_p() = %d\n",
gdbarch_auxv_parse_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: auxv_parse = <%s>\n",
host_address_to_string (gdbarch->auxv_parse));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_ax_pseudo_register_collect_p() = %d\n",
gdbarch_ax_pseudo_register_collect_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: ax_pseudo_register_collect = <%s>\n",
host_address_to_string (gdbarch->ax_pseudo_register_collect));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_ax_pseudo_register_push_stack_p() = %d\n",
gdbarch_ax_pseudo_register_push_stack_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: ax_pseudo_register_push_stack = <%s>\n",
host_address_to_string (gdbarch->ax_pseudo_register_push_stack));
fprintf_unfiltered (file,
"gdbarch_dump: believe_pcc_promotion = %s\n",
plongest (gdbarch->believe_pcc_promotion));
fprintf_unfiltered (file,
"gdbarch_dump: bfd_arch_info = %s\n",
gdbarch_bfd_arch_info (gdbarch)->printable_name);
fprintf_unfiltered (file,
"gdbarch_dump: bits_big_endian = %s\n",
plongest (gdbarch->bits_big_endian));
fprintf_unfiltered (file,
"gdbarch_dump: breakpoint_from_pc = <%s>\n",
host_address_to_string (gdbarch->breakpoint_from_pc));
fprintf_unfiltered (file,
"gdbarch_dump: breakpoint_kind_from_current_state = <%s>\n",
host_address_to_string (gdbarch->breakpoint_kind_from_current_state));
New gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind This patch adds two gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind, and uses target_info.placed_size as "kind" of the breakpoint. This patch updates the usages of target_info.placed_size. The "kind" of a breakpoint is determined by gdbarch rather than target, so we have gdbarch method breakpoint_kind_from_pc, and we should set target_info.placed_size out of each implementation of target to_insert_breakpoint. In this way, each target doesn't have to set target_info.placed_size any more. This patch also sets target_info.placed_address before target_insert_breakpoint too, so that target to_insert_breakpoint can use it, see record_full_insert_breakpoint. Before we call target_insert_breakpoint, we set target_info.placed_address and target_info.placed_size like this, CORE_ADDR addr = bl->target_info.reqstd_address; bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr); bl->target_info.placed_address = addr; return target_insert_breakpoint (bl->gdbarch, &bl->target_info); target_insert_breakpoint may fail, but it doesn't matter to the "kind" and "placed_address" of a breakpoint. They should be determined by gdbarch. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define breakpoint_kind_from_pc and sw_breakpoint_from_kind. (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call set_gdbarch_breakpoint_kind_from_pc and set_gdbarch_sw_breakpoint_from_kind. * arm-tdep.c: Add comments. * bfin-tdep.c: Likewise. * breakpoint.c (breakpoint_kind): New function. (insert_bp_location): Set target_info.placed_size and target_info.placed_address. (bkpt_insert_location): Likewise. * cris-tdep.c: Add comments. * gdbarch.sh (breakpoint_kind_from_pc): New. (sw_breakpoint_from_kind): New. * gdbarch.c, gdbarch.h: Regenerated. * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set bp_tgt->placed_size. (ia64_memory_remove_breakpoint): Don't assert bp_tgt->placed_size. (ia64_breakpoint_kind_from_pc): New function. (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc. * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set bp_tgt->placed_size. * mem-break.c (default_memory_insert_breakpoint): Don't set bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind. (default_memory_remove_breakpoint): Call gdbarch_sw_breakpoint_from_kind. (memory_validate_breakpoint): Don't check bp_tgt->placed_size. * mips-tdep.c: Add comments. * mt-tdep.c: Likewise. * nios2-tdep.c: Likewise. * record-full.c (record_full_insert_breakpoint): Don't call gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address and bp_tgt->placed_size. * remote.c (remote_insert_breakpoint): Don't call gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size. Don't set bp_tgt->placed_address and bp_tgt->placed_size. (remote_insert_hw_breakpoint): Likewise. * score-tdep.c: Likewise. * sh-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * v850-tdep.c: Likewise. * xtensa-tdep.c: Likewise.
2016-11-03 22:35:13 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: breakpoint_kind_from_pc = <%s>\n",
host_address_to_string (gdbarch->breakpoint_kind_from_pc));
fprintf_unfiltered (file,
"gdbarch_dump: byte_order = %s\n",
plongest (gdbarch->byte_order));
fprintf_unfiltered (file,
"gdbarch_dump: byte_order_for_code = %s\n",
plongest (gdbarch->byte_order_for_code));
fprintf_unfiltered (file,
"gdbarch_dump: call_dummy_location = %s\n",
plongest (gdbarch->call_dummy_location));
fprintf_unfiltered (file,
"gdbarch_dump: cannot_fetch_register = <%s>\n",
host_address_to_string (gdbarch->cannot_fetch_register));
fprintf_unfiltered (file,
"gdbarch_dump: cannot_step_breakpoint = %s\n",
plongest (gdbarch->cannot_step_breakpoint));
fprintf_unfiltered (file,
"gdbarch_dump: cannot_store_register = <%s>\n",
host_address_to_string (gdbarch->cannot_store_register));
fprintf_unfiltered (file,
"gdbarch_dump: char_signed = %s\n",
plongest (gdbarch->char_signed));
Skip unwritable frames in command "finish" Nowadays, GDB can't insert breakpoint on the return address of the exception handler on ARM M-profile, because the address is a magic one 0xfffffff9, (gdb) bt #0 CT32B1_IRQHandler () at ../src/timer.c:67 #1 <signal handler called> #2 main () at ../src/timer.c:127 (gdb) info frame Stack level 0, frame at 0x200ffa8: pc = 0x4ec in CT32B1_IRQHandler (../src/timer.c:67); saved pc = 0xfffffff9 called by frame at 0x200ffc8 source language c. Arglist at 0x200ffa0, args: Locals at 0x200ffa0, Previous frame's sp is 0x200ffa8 Saved registers: r7 at 0x200ffa0, lr at 0x200ffa4 (gdb) x/x 0xfffffff9 0xfffffff9: Cannot access memory at address 0xfffffff9 (gdb) finish Run till exit from #0 CT32B1_IRQHandler () at ../src/timer.c:67 Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 0. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. even some debug probe can't set hardware breakpoint on the magic address too, (gdb) hbreak *0xfffffff9 Hardware assisted breakpoint 2 at 0xfffffff9 (gdb) c Continuing. Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 2. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. The problem described above is quite similar to PR 8841, in which GDB can't set breakpoint on signal trampoline, which is mapped to a read-only page by kernel. The rationale of this patch is to skip "unwritable" frames when looking for caller frames in command "finish", and a new gdbarch method code_of_frame_writable is added. This patch fixes the problem on ARM cortex-m target, but it can be used to fix PR 8841 too. gdb: 2016-05-10 Yao Qi <yao.qi@arm.com> * arch-utils.c (default_code_of_frame_writable): New function. * arch-utils.h (default_code_of_frame_writable): Declare. * arm-tdep.c (arm_code_of_frame_writable): New function. (arm_gdbarch_init): Install gdbarch method code_of_frame_writable if the target is M-profile. * frame.c (skip_unwritable_frames): New function. * frame.h (skip_unwritable_frames): Declare. * gdbarch.sh (code_of_frame_writable): New. * gdbarch.c, gdbarch.h: Re-generated. * infcmd.c (finish_command): Call skip_unwritable_frames.
2016-05-24 00:32:56 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: code_of_frame_writable = <%s>\n",
host_address_to_string (gdbarch->code_of_frame_writable));
fprintf_unfiltered (file,
"gdbarch_dump: coff_make_msymbol_special = <%s>\n",
host_address_to_string (gdbarch->coff_make_msymbol_special));
fprintf_unfiltered (file,
"gdbarch_dump: convert_from_func_ptr_addr = <%s>\n",
host_address_to_string (gdbarch->convert_from_func_ptr_addr));
fprintf_unfiltered (file,
"gdbarch_dump: convert_register_p = <%s>\n",
host_address_to_string (gdbarch->convert_register_p));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_core_info_proc_p() = %d\n",
gdbarch_core_info_proc_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: core_info_proc = <%s>\n",
host_address_to_string (gdbarch->core_info_proc));
* corelow.c (get_core_registers): Adjust. (core_file_thread_alive): Rename to... (core_thread_alive): ... this. (core_pid_to_str): Try gdbarch_core_pid_to_str first. (init_core_ops): Adjust. (coreops_suppress_target): Delete. (_initialize_corelow): Unconditionally add core_ops. * procfs.c: Include "inf-child.h". (procfs_ops): Delete. (init_procfs_ops): Delete. Reimplement as... (procfs_target): ... this, inheriting from inf-child. (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust. (procfs_prepare_to_store): Delete. (procfs_store_registers, procfs_resume): Adjust. (procfs_open): Delete. (procfs_suppress_run): Delete. (procfs_can_run): Delete. (procfs_mourn_inferior): Adjust. (procfs_init_inferior): Add target_ops parameter. Adjust. (procfs_create_inferior): Don't pass procfs_init_inferior to fork_inferior. Instead call it after fork_inferior returns. (procfs_find_new_threads): Adjust. (_initialize_procfs): Adjust to use procfs_target instead of init_procfs_ops. * sol-thread.c (orig_core_ops, sol_core_ops): Delete. (lwp_to_thread): Use target_thread_alive. (sol_thread_open): Delete. (sol_thread_attach): Delete. (sol_thread_detach, sol_thread_resume, sol_thread_wait) (sol_thread_fetch_registers, sol_thread_store_registers): Adjust to use find_target_beneath. (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete. (sol_thread_xfer_partial): Adjust to use find_target_beneath. (sol_thread_files_info, sol_thread_kill_inferior): Delete. (check_for_thread_db): New. (sol_thread_notice_signals, sol_thread_create_inferior): Delete. (sol_thread_new_objfile): Call check_for_thread_db. (sol_thread_mourn_inferior): Adjust to use find_target_beneath. (sol_thread_can_run): Delete. (sol_thread_alive): Adjust to use find_target_beneath. (sol_thread_stop): Delete. (rw_common): Use target_write_memory or target_read_memory. (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers. (ps_lsetregs, ps_lsetfpregs): Use target_store_registers. (solaris_pid_to_str): Remove check for libthread_db initialization failing. (sol_find_new_threads): Remove check for libthread_db initialization failing, or for an invalid inferior_ptid. Adjust to use find_target_beneath. (sol_core_open, sol_core_close, sol_core_detach, sol_core_files_info, sol_find_memory_regions, sol_make_note_section, ignore): Delete. (init_sol_thread_ops): Make it a thread_stratum target. Remove unneeded callback settings. (init_sol_core_ops): Delete. (_initialize_sol_thread): No longer call init_sol_core_ops, set procfs_suppress_run, or hack with core_ops. * target.h (struct target_ops): Add a target_ops * parameter to to_resume, to_fetch_registers, to_store_registers, to_thread_alive and to_find_new_threads. (target_fetch_registers, target_store_registers) (target_thread_alive, target_find_new_threads): Redeclare as function. * target.c (update_current_target): Do not inherit or de_fault to_resume, to_fetch_registers, to_store_registers, to_thread_alive, to_find_new_threads. (target_resume): Adjust. (target_thread_alive, target_find_new_threads): New. (debug_to_resume, debug_to_fetch_registers): Delete. (target_fetch_registers): New. (debug_to_store_registers): Delete. (target_store_registers): New. (debug_to_thread_alive, debug_to_find_new_threads): Delete. (setup_target_debug): Adjust. * gdbcore.h (core_ops): Delete declaration. * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c, inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c, i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c, hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c, nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c, alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c, bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c, hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c, ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c, m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c, mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c, ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c, shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c, vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes. * gdbarch.sh (core_pid_to_str): New gdbarch callback. * gdbarch.h, gdbarch.c: Regenerate. * sol2-tdep.c: Include "inferior.h". (sol2_core_pid_to_str): New. * sol2-tdep.h (sol2_core_pid_to_str): Declare. * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it. * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-23 08:03:50 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_core_pid_to_str_p() = %d\n",
gdbarch_core_pid_to_str_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: core_pid_to_str = <%s>\n",
host_address_to_string (gdbarch->core_pid_to_str));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_core_read_description_p() = %d\n",
gdbarch_core_read_description_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: core_read_description = <%s>\n",
host_address_to_string (gdbarch->core_read_description));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_core_thread_name_p() = %d\n",
gdbarch_core_thread_name_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: core_thread_name = <%s>\n",
host_address_to_string (gdbarch->core_thread_name));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_core_xfer_shared_libraries_p() = %d\n",
gdbarch_core_xfer_shared_libraries_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: core_xfer_shared_libraries = <%s>\n",
host_address_to_string (gdbarch->core_xfer_shared_libraries));
ppc-aix core file relocation. The current code attempts to provide relocation support when debugging core files via the rs6000_xfer_partial method of the rs6000-nat target_ops vector. However, this target_ops vector does not get pushed on the target stack at all when debugging core files, thus bypassing completely that part of the code. This patch fixes the problem by extending corelow's core_xfer_partial into handling the TARGET_OBJECT_LIBRARIES_AIX object. gdb/ChangeLog: * gdbarch.sh (core_xfer_shared_libraries_aix): New method. * gdbarch.h, gdbarch.c: Regenerate. * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX handling. * rs6000-aix-tdep.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h. * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and "xml-utils.h". (struct field_info, struct ld_info_desc): New types. (ld_info32_desc, ld_info64_desc): New static constants. (struct ld_info): New type. (rs6000_aix_extract_ld_info): New function. (rs6000_aix_shared_library_to_xml): Likewise. (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. (rs6000_aix_init_osabi): Add call to set_gdbarch_core_xfer_shared_libraries_aix. * rs6000-nat.c: Add "rs6000-aix-tdep.h" include. Remove "xml-utils.h" include. (LdInfo): Delete typedef. (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME): Delete macros. (rs6000_ptrace_ldinfo): Change return type to gdb_byte *. Adjust code accordingly. (rs6000_core_ldinfo): Delete, folded into rs6000_aix_core_xfer_shared_libraries_aix. (rs6000_xfer_shared_library): Delete. (rs6000_xfer_shared_libraries): Reimplement.
2013-05-15 20:26:14 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_core_xfer_shared_libraries_aix_p() = %d\n",
gdbarch_core_xfer_shared_libraries_aix_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: core_xfer_shared_libraries_aix = <%s>\n",
host_address_to_string (gdbarch->core_xfer_shared_libraries_aix));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_core_xfer_siginfo_p() = %d\n",
gdbarch_core_xfer_siginfo_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: core_xfer_siginfo = <%s>\n",
host_address_to_string (gdbarch->core_xfer_siginfo));
fprintf_unfiltered (file,
"gdbarch_dump: decr_pc_after_break = %s\n",
core_addr_to_string_nz (gdbarch->decr_pc_after_break));
fprintf_unfiltered (file,
"gdbarch_dump: deprecated_fp_regnum = %s\n",
plongest (gdbarch->deprecated_fp_regnum));
fprintf_unfiltered (file,
"gdbarch_dump: deprecated_function_start_offset = %s\n",
core_addr_to_string_nz (gdbarch->deprecated_function_start_offset));
GDB: Add support for the new set/show disassembler-options commands. This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-03-01 02:32:07 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: disassembler_options = %s\n",
pstring_ptr (gdbarch->disassembler_options));
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_displaced_step_copy_insn_p() = %d\n",
gdbarch_displaced_step_copy_insn_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: displaced_step_copy_insn = <%s>\n",
host_address_to_string (gdbarch->displaced_step_copy_insn));
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_displaced_step_fixup_p() = %d\n",
gdbarch_displaced_step_fixup_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: displaced_step_fixup = <%s>\n",
host_address_to_string (gdbarch->displaced_step_fixup));
fprintf_unfiltered (file,
"gdbarch_dump: displaced_step_hw_singlestep = <%s>\n",
host_address_to_string (gdbarch->displaced_step_hw_singlestep));
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: displaced_step_location = <%s>\n",
host_address_to_string (gdbarch->displaced_step_location));
fprintf_unfiltered (file,
"gdbarch_dump: double_bit = %s\n",
plongest (gdbarch->double_bit));
fprintf_unfiltered (file,
"gdbarch_dump: double_format = %s\n",
pformat (gdbarch->double_format));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_dtrace_disable_probe_p() = %d\n",
gdbarch_dtrace_disable_probe_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: dtrace_disable_probe = <%s>\n",
host_address_to_string (gdbarch->dtrace_disable_probe));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_dtrace_enable_probe_p() = %d\n",
gdbarch_dtrace_enable_probe_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: dtrace_enable_probe = <%s>\n",
host_address_to_string (gdbarch->dtrace_enable_probe));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_dtrace_parse_probe_argument_p() = %d\n",
gdbarch_dtrace_parse_probe_argument_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: dtrace_parse_probe_argument = <%s>\n",
host_address_to_string (gdbarch->dtrace_parse_probe_argument));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_dtrace_probe_is_enabled_p() = %d\n",
gdbarch_dtrace_probe_is_enabled_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: dtrace_probe_is_enabled = <%s>\n",
host_address_to_string (gdbarch->dtrace_probe_is_enabled));
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_dummy_id_p() = %d\n",
gdbarch_dummy_id_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: dummy_id = <%s>\n",
host_address_to_string (gdbarch->dummy_id));
fprintf_unfiltered (file,
"gdbarch_dump: dwarf2_addr_size = %s\n",
plongest (gdbarch->dwarf2_addr_size));
fprintf_unfiltered (file,
"gdbarch_dump: dwarf2_reg_to_regnum = <%s>\n",
host_address_to_string (gdbarch->dwarf2_reg_to_regnum));
fprintf_unfiltered (file,
"gdbarch_dump: ecoff_reg_to_regnum = <%s>\n",
host_address_to_string (gdbarch->ecoff_reg_to_regnum));
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_elf_make_msymbol_special_p() = %d\n",
gdbarch_elf_make_msymbol_special_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: elf_make_msymbol_special = <%s>\n",
host_address_to_string (gdbarch->elf_make_msymbol_special));
[gdbarch] New method "execute_dwarf_cfa_vendor_op" and migrate SPARC to it Recently a feature called "return address signing" has been added to GCC to prevent stack smash stack on AArch64. For details please refer: https://gcc.gnu.org/ml/gcc-patches/2017-01/msg00376.html GDB needs to be aware of this feature so it can restore the original return address which is critical for unwinding. On compiler side, whenever return address, i.e. LR register, is mangled or restored by hardware instruction, compiler is expected to generate a DW_CFA_AARCH64_negate_ra_state to toggle return address signing status. DW_CFA_AARCH64_negate_ra_state is using the same CFI number and therefore need to be multiplexed with DW_CFA_GNU_window_save which was designed for SPARC. A new gdbarch method "execute_dwarf_cfa_vendor_op" is introduced by this patch. It's parameters has been restricted to those only needed by SPARC and AArch64 for multiplexing DW_CFA_GNU_window_save which is a CFI operation takes none operand. Should any further DWARF CFI operation want to be multiplexed in the future, the parameter list can be extended. Below is the current function prototype. typedef int (gdbarch_execute_dwarf_cfa_vendor_op_ftype) (struct gdbarch *gdbarch, gdb_byte op, struct dwarf2_frame_state *fs); DW_CFA_GNU_window_save support for SPARC is migrated to this new gdbarch method by this patch. gdb/ * gdbarch.sh: New gdbarch method execute_dwarf_cfa_vendor_op. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * dwarf2-frame.c (dwarf2_frame_state_alloc_regs): Made the visibility external. (execute_cfa_program): Call execute_dwarf_cfa_vendor_op for CFI between DW_CFA_lo_user and DW_CFA_high_user inclusive. (enum cfa_how_kind): Move to ... (struct dwarf2_frame_state_reg_info): Likewise. (struct dwarf2_frame_state): Likewise. * dwarf2-frame.h: ... here. (dwarf2_frame_state_alloc_regs): New declaration. * sparc-tdep.c (sparc_execute_dwarf_cfa_vendor_op): New function. (sparc32_gdbarch_init): Register execute_dwarf_cfa_vendor_op hook.
2017-04-26 21:05:03 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: execute_dwarf_cfa_vendor_op = <%s>\n",
host_address_to_string (gdbarch->execute_dwarf_cfa_vendor_op));
Add fast tracepoints. * arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-06 12:20:27 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: fast_tracepoint_valid_at = <%s>\n",
host_address_to_string (gdbarch->fast_tracepoint_valid_at));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_fetch_pointer_argument_p() = %d\n",
gdbarch_fetch_pointer_argument_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: fetch_pointer_argument = <%s>\n",
host_address_to_string (gdbarch->fetch_pointer_argument));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_fetch_tls_load_module_address_p() = %d\n",
gdbarch_fetch_tls_load_module_address_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: fetch_tls_load_module_address = <%s>\n",
host_address_to_string (gdbarch->fetch_tls_load_module_address));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_find_memory_regions_p() = %d\n",
gdbarch_find_memory_regions_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: find_memory_regions = <%s>\n",
host_address_to_string (gdbarch->find_memory_regions));
fprintf_unfiltered (file,
"gdbarch_dump: float_bit = %s\n",
plongest (gdbarch->float_bit));
fprintf_unfiltered (file,
"gdbarch_dump: float_format = %s\n",
pformat (gdbarch->float_format));
Add gdbarch callback to provide formats for debug info float types At this point, all TYPE_CODE_FLT types carry their floating-point format, except for those creating from reading DWARF or stabs debug info. Those will be addressed by this commit. The main issue here is that we actually have to determine which floating- point format to use. Currently, we only have the type length as input to this decision. In the future, we may hopefully get --at least in DWARF-- additional information to help disambiguate multiple different formats of the same length. For now, we can still look at the type name as a hint. This decision logic is encapsulated in a gdbarch callback to allow platform-specific overrides. The default implementation use the same logic (compare type length against the various gdbarch_..._bit sizes) that is currently implemented in floatformat_from_length. With this commit, all platforms still use the default logic, so there should be no actual change in behavior. A follow-on commit will add support for __float128 on Intel and Power. Once dwarf2read.c and stabsread.c make use of the new callback to determine floating-point formats, we're now sure every TYPE_CODE_FLT type will always carry its format. The commit therefore adds asserts to verify_floatformat to ensure new code will continue to always provide formats, and removes the code in floatformat_from_type that used to handle types with a NULL TYPE_FLOATFORMAT. gdb/ChangeLog: * gdbarch.sh (floatformat_for_type): New gdbarch callback. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (default_floatformat_for_type): New prototype. * arch-utils.c (default_floatformat_for_type): New function. * doublest.c (floatformat_from_length): Remove. (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL. * gdbtypes.c (verify_floatformat): Require non-NULL format. * dwarf2read.c (dwarf2_init_float_type): New function. (read_base_type): Use it. * stabsread.c (dbx_init_float_type): New function. (read_sun_floating_type): Use it. (read_range_type): Likewise. Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
2016-09-06 23:31:53 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: floatformat_for_type = <%s>\n",
host_address_to_string (gdbarch->floatformat_for_type));
fprintf_unfiltered (file,
"gdbarch_dump: fp0_regnum = %s\n",
plongest (gdbarch->fp0_regnum));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_frame_align_p() = %d\n",
gdbarch_frame_align_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: frame_align = <%s>\n",
host_address_to_string (gdbarch->frame_align));
fprintf_unfiltered (file,
"gdbarch_dump: frame_args_skip = %s\n",
core_addr_to_string_nz (gdbarch->frame_args_skip));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_frame_num_args_p() = %d\n",
gdbarch_frame_num_args_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: frame_num_args = <%s>\n",
host_address_to_string (gdbarch->frame_num_args));
fprintf_unfiltered (file,
"gdbarch_dump: frame_red_zone_size = %s\n",
plongest (gdbarch->frame_red_zone_size));
fprintf_unfiltered (file,
"gdbarch_dump: gcc_target_options = <%s>\n",
host_address_to_string (gdbarch->gcc_target_options));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_gcore_bfd_target_p() = %d\n",
gdbarch_gcore_bfd_target_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: gcore_bfd_target = %s\n",
pstring (gdbarch->gcore_bfd_target));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_gdb_signal_from_target_p() = %d\n",
gdbarch_gdb_signal_from_target_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: gdb_signal_from_target = <%s>\n",
host_address_to_string (gdbarch->gdb_signal_from_target));
This patch implements the new gdbarch method gdbarch_gdb_signal_to_target. It will be used when one wants to convert between the internal GDB signal representation (enum gdb_signal) and the target's representation. The idea of this patch came from a chat between Pedro and I on IRC, plus the discussion of my patches to add the new $_exitsignal convenience variable: <http://sourceware.org/ml/gdb-patches/2013-06/msg00452.html> <http://sourceware.org/ml/gdb-patches/2013-06/msg00352.html> What I did was to investigate, on the Linux kernel, which targets shared the signal numbers definition with the generic definition, present at <include/uapi/asm-generic/signal.h>. For the record, I used linux-3.10-rc7 as the main source of information, always looking at <arch/<ARCH_NAME>/include/uapi/asm/signal.h>. For SIGRTMAX (which defaults to _NSIG in most cases), I had to look at different signal-related files, but most of them (except MIPS) were defined to 64 anyway. Then, with all the differences in hand, I implemented the bits on each target. 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com> * linux-tdep.c: Define enum with generic signal numbers. (linux_gdb_signal_from_target): New function. (linux_gdb_signal_to_target): Likewise. (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target methods to the functions above. * linux-tdep.h (linux_gdb_signal_from_target): New prototype. (linux_gdb_signal_to_target): Likewise. * alpha-linux-tdep.c: Define new enum with signals different from generic Linux kernel. (alpha_linux_gdb_signal_from_target): New function. (alpha_linux_gdb_signal_to_target): Likewise. (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target with the functions mentioned above. * avr-tdep.c: Define enum with differences between Linux kernel and AVR signals. (avr_linux_gdb_signal_from_target): New function. (avr_linux_gdb_signal_to_target): Likewise. (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to the functions mentioned above. * sparc-linux-tdep.c: Define enum with differences between SPARC and generic Linux kernel signal numbers. (sparc32_linux_gdb_signal_from_target): New function. (sparc32_linux_gdb_signal_to_target): Likewise. (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target to the functions defined above. * xtensa-linux-tdep.c: Define enum with differences between Xtensa and Linux kernel generic signals. (xtensa_linux_gdb_signal_from_target): New function. (xtensa_linux_gdb_signal_to_target): Likewise. (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target to the functions defined above. * mips-linux-tdep.c: Define enum with differences between signals in MIPS and Linux kernel generic ones. (mips_gdb_signal_to_target): New function. (mips_gdb_signal_from_target): Redefine to use new enum, handle only different signals from the Linux kernel generic. (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target the functions defined above. * mips-linux-tdep.h (enum mips_signals): Remove.
2013-08-10 00:54:43 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_gdb_signal_to_target_p() = %d\n",
gdbarch_gdb_signal_to_target_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: gdb_signal_to_target = <%s>\n",
host_address_to_string (gdbarch->gdb_signal_to_target));
fprintf_unfiltered (file,
"gdbarch_dump: gen_return_address = <%s>\n",
host_address_to_string (gdbarch->gen_return_address));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_get_longjmp_target_p() = %d\n",
gdbarch_get_longjmp_target_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: get_longjmp_target = <%s>\n",
host_address_to_string (gdbarch->get_longjmp_target));
2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/ * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO. * infrun.c (siginfo_value_read, siginfo_value_write): New. (siginfo_value_funcs): New. (siginfo_make_value): New. (_initialize_infrun): Create the $_siginfo convenience variable. * gdbtypes.h (append_composite_type_field_aligned): Declare. * gdbtypes.c (append_composite_type_field): Rename to... (append_composite_type_field_aligned): ... this. Add ALIGNMENT argument. Handle it. (append_composite_type_field): Rewrite on top of append_composite_type_field_aligned. * value.h (internalvar_make_value): New typedef. (struct internalvar) <make_value>: New field. (create_internalvar_type_lazy): Declare. * value.c (create_internalvar): Clear make_value. (create_internalvar_type_lazy): New. (value_of_internalvar): If make_value is set use it. (preserve_values): Skip internal variables that don't have a value. * gdbarch.sh (get_siginfo_type): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.h, linux-tdep.c: New. * amd64-linux-tdep.c: Include "linux-tdep.h". (amd64_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * i386-linux-tdep.c: Include "linux-tdep.h". (i386_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * arm-linux-tdep.c: Include "linux-tdep.h". (i386_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * linux-nat.c (linux_xfer_siginfo): New. (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO. * remote.c (PACKET_qXfer_siginfo_read) (PACKET_qXfer_siginfo_write): New. (feature remote_protocol_features): Add "qXfer:siginfo:read" and "qXfer:siginfo:write" features. (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO. (_initialize_remote): Add "set/show remote read-siginfo-object" and "set/show remote write-siginfo-object" commands. * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o. (HFILES_NO_SRCDIR): Add linux-tdep.h. (ALLDEPFILES): Add linux-tdep.c. * configure.tgt (arm*-*-linux* | arm*-*-uclinux*) (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to gdb_target_obs. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/gdbserver/ * server.c (handle_query): Report qXfer:siginfo:read and qXfer:siginfo:write as supported and handle them. * target.h (struct target_ops) <qxfer_siginfo>: New field. * linux-low.c (linux_xfer_siginfo): New. (linux_target_ops): Set it. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/doc/ * gdb.texinfo (Signals): Document $_siginfo. (Convenience Variables): Mention $_siginfo. (Remote Configuration): Document qXfer:siginfo:read, qXfer:siginfo:write packets, and the read-siginfo-object, write-siginfo-object commands. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/testsuite/ * gdb.base/siginfo-obj.c, gdb.base/siginfo-obj.exp: New.
2009-02-07 06:59:01 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_get_siginfo_type_p() = %d\n",
gdbarch_get_siginfo_type_p (gdbarch));
fprintf_unfiltered (file,
2009-02-11 22:32:17 +08:00
"gdbarch_dump: get_siginfo_type = <%s>\n",
host_address_to_string (gdbarch->get_siginfo_type));
Implementing catch syscall. * amd64-linux-tdep.c: Include xml-syscall.h header, define the XML syscall name for the architecture. (amd64_linux_get_syscall_number): New function. (amd64_linux_init_abi): Register the correct functions for syscall catchpoint; set the correct syscall file name. * breakpoint.c: New include: xml-syscall.h. (set_raw_breakpoint_without_location): Setting the parameters for the catch syscall feature. (insert_catch_syscall): New. (remove_catch_syscall): New. (breakpoint_hit_catch_syscall): New. (print_it_catch_syscall): New. (print_one_catch_syscall): New. (print_mention_catch_syscall): New. (catch_syscall_breakpoint_ops): New. (syscall_catchpoint_p): New. (create_catchpoint_without_mention): New. (create_catchpoint): Modified in order to use create_catchpoint_without_mention. (create_syscall_event_catchpoint): New. (clean_up_filters): New. (catch_syscall_split_args): New. (catch_syscall_command_1): New. (delete_breakpoint): Add cleanup for catch syscall. (is_syscall_catchpoint_enabled): New. (catch_syscall_enabled): New. (catching_syscall_number): New. (catch_syscall_completer): New completer function. (add_catch_command): Add the completer function for catchpoints. * breakpoint.h (syscalls_to_be_caught): New vector. (catch_syscall_enabled): New. (catching_syscall_number): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * gdbarch.sh: Add syscall catchpoint functions and structures. (get_syscall_number): New. (UNKNOWN_SYSCALL): New definition. * i386-linux-nat.c (i386_linux_resume): Select the proper request to be made for ptrace() considering if we are catching syscalls or not. * i386-linux-tdep.c: Include xml-syscall.h header, define the XML syscall name for the architecture. (i386_linux_get_syscall_number): New. (i386_linux_init_abi): Register the correct functions for syscall catchpoint; set the correct syscall file name. * inf-child.c (inf_child_set_syscall_catchpoint): New. (inf_child_target): Assign default values to target_ops. * inf-ptrace.c (inf_ptrace_resume): Select the proper request to be made for ptrace() considering if we are catching syscalls or not. * inferior.h (struct inferior): Included new variables any_syscall_count, syscalls_counts and total_syscalls_count, used to keep track of requested syscall catchpoints. * infrun.c (resume): Add syscall catchpoint. (deal_with_syscall_event): New. (handle_inferior_event): Add syscall entry/return events. (inferior_has_called_syscall): New. * linux-nat.c: Define some helpful variables to track wether we have support for the needed ptrace option. (linux_test_for_tracesysgood): New. (linux_supports_tracesysgood): New. (linux_enable_tracesysgood): New. (linux_enable_event_reporting): Save the current used ptrace options. (linux_child_post_attach): Calling linux_enable_tracesysgood. (linux_child_post_startup_inferior): Likewise. (linux_child_set_syscall_catchpoint): New function. (linux_handle_extended_wait): Handle the case which the inferior stops because it has called or returned from a syscall. (linux_target_install_ops): Install the necessary functions to handle syscall catchpoints. * linux-nat.h (struct lwp_info): Include syscall_state into the structure, which indicates if we are in a syscall entry or return. * ppc-linux-tdep.c: Include xml-syscall.h header, define the XML syscall filename for the arch. (ppc_linux_get_syscall_number): New. (ppc_linux_init_abi): Register the correct functions for syscall catchpoint; setting the correct name for the XML syscall file. * target.c (update_current_target): Update/copy functions related to syscall catchpoint. (target_waitstatus_to_string): Add syscall catchpoint entry/return events. * target.h (struct target_waitstatus): Add syscall number. (struct syscall): New struct to hold information about syscalls in the system. (struct target_ops): Add ops for syscall catchpoint. (inferior_has_called_syscall): New. (target_set_syscall_catchpoint): New. * xml-support.c (xml_fetch_content_from_file): New function, transferred from xml-tdesc.c. * xml-support.h (xml_fetch_content_from_file): New. * xml-tdesc.c (fetch_xml_from_file): Function removed; transferred to xml-support.c. (file_read_description_xml): Updated to use the new xml_fetch_content_from_file function. * syscalls/gdb-syscalls.dtd: New definition file for syscall's XML support. * syscalls/amd64-linux.xml: New file containing information about syscalls for GNU/Linux systems that use amd64 architecture. * syscalls/i386-linux.xml: New file containing information about syscalls for GNU/Linux systems that use i386 architecture. * syscalls/ppc-linux.xml: New file containing information about syscalls for GNU/Linux systems that use PPC architecture. * syscalls/ppc64-linux.xml: New file containing information about syscalls for GNU/Linux systems that use PPC64 architecture. * xml-syscall.c: New file containing functions for manipulating syscall's XML files. * xml-syscall.h: New file, exporting the functions above mentioned. * Makefile.in: Support for relocatable GDB datadir and XML syscall. * NEWS: Added information about the catch syscall feature. * doc/gdb.texinfo (Set Catchpoints): Documentation about the new feature. * testsuite/Makefile.in: Inclusion of catch-syscall object. * testsuite/gdb.base/catch-syscall.c: New file. * testsuite/gdb.base/catch-syscall.exp: New file.
2009-09-15 11:30:08 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_get_syscall_number_p() = %d\n",
gdbarch_get_syscall_number_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: get_syscall_number = <%s>\n",
host_address_to_string (gdbarch->get_syscall_number));
add gnu_triplet_regexp gdbarch method gdb has to inform libcc1.so of the target being used, so that the correct compiler can be invoked. The compiler is invoked using the GNU configury triplet prefix, e.g., "x86_64-unknown-linux-gnu-gcc". In order for this to work we need to map the gdbarch to the GNU configury triplet arch. In most cases these are identical; however, the x86 family poses some problems, as the BFD arch names are quite different from the GNU triplet names. So, we introduce a new gdbarch method for this. A regular expression is used because there are various valid values for the arch prefix in the triplet. This patch also updates the osabi code to associate a regular expression with the OS ABI. I have only added a concrete value for Linux. Note that the "-gnu" part is optional, at least on Fedora it is omitted from the installed GCC executable's name. gdb/ChangeLog 2014-12-12 Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * osabi.h (osabi_triplet_regexp): Declare. * osabi.c (struct osabi_names): New. (gdb_osabi_names): Change type to struct osabi_names. Update values. (gdbarch_osabi_name): Update. (osabi_triplet_regexp): New function. (osabi_from_tdesc_string, _initialize_gdb_osabi): Update. * i386-tdep.c (i386_gnu_triplet_regexp): New method. (i386_elf_init_abi, i386_go32_init_abi, i386_gdbarch_init): Call set_gdbarch_gnu_triplet_regexp. * gdbarch.sh (gnu_triplet_regexp): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_gnu_triplet_regexp): Declare. * arch-utils.c (default_gnu_triplet_regexp): New function.
2014-06-13 23:28:24 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gnu_triplet_regexp = <%s>\n",
host_address_to_string (gdbarch->gnu_triplet_regexp));
fprintf_unfiltered (file,
"gdbarch_dump: guess_tracepoint_registers = <%s>\n",
host_address_to_string (gdbarch->guess_tracepoint_registers));
fprintf_unfiltered (file,
"gdbarch_dump: half_bit = %s\n",
plongest (gdbarch->half_bit));
fprintf_unfiltered (file,
"gdbarch_dump: half_format = %s\n",
pformat (gdbarch->half_format));
Intel MPX bound violation handling With Intel Memory Protection Extensions it was introduced the concept of boundary violation. A boundary violations is presented to the inferior as a segmentation fault having SIGCODE 3. This patch adds a handler for a boundary violation extending the information displayed when a bound violation is presented to the inferior. In the stop mode case the debugger will also display the kind of violation: "upper" or "lower", bounds and the address accessed. On no stop mode the information will still remain unchanged. Additional information about bound violations are not meaningful in that case user does not know the line in which violation occurred as well. When the segmentation fault handler is stop mode the out puts will be changed as exemplified below. The usual output of a segfault is: Program received signal SIGSEGV, Segmentation fault 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In case it is a bound violation it will be presented as: Program received signal SIGSEGV, Segmentation fault Upper bound violation while accessing address 0x7fffffffc3b3 Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3] 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In mi mode the output of a segfault is: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c", func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"} ,{name="b",value="0x603050"}, {name="c",value="0x603070"}, {name="d",value="0x603090"},{name="len",value="7"}], file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"}, thread-id="1",stopped-threads="all",core="6" in the case of a bound violation: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", sigcode-meaning="Upper bound violation", lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f", frame={addr="0x0000000000400d7c",func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"}, {name="c",value="0x603070"},{name="d",value="0x603090"}, {name="len",value="7"}],file="i386-mpx-sigsegv.c", fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1", stopped-threads="all",core="6" 2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com> gdb/ChangeLog: * NEWS: Add entry for bound violation. * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add handler for segmentation fault. * gdbarch.sh (handle_segmentation_fault): New. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New. (SIG_CODE_BONDARY_FAULT): New define. (i386_linux_init_abi): Use i386_mpx_bound_violation_handler. * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New. * i386-tdep.c (i386_mpx_enabled): Add as external. * i386-tdep.c (i386_mpx_enabled): Add as external. * infrun.c (handle_segmentation_fault): New function. (print_signal_received_reason): Use handle_segmentation_fault. gdb/testsuite/ChangeLog: * gdb.arch/i386-mpx-sigsegv.c: New file. * gdb.arch/i386-mpx-sigsegv.exp: New file. * gdb.arch/i386-mpx-simple_segv.c: New file. * gdb.arch/i386-mpx-simple_segv.exp: New file. gdb/doc/ChangeLog: * gdb.texinfo (Signals): Add bound violation display hints for a SIGSEGV.
2016-02-19 00:24:59 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_handle_segmentation_fault_p() = %d\n",
gdbarch_handle_segmentation_fault_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: handle_segmentation_fault = <%s>\n",
host_address_to_string (gdbarch->handle_segmentation_fault));
fprintf_unfiltered (file,
"gdbarch_dump: has_dos_based_file_system = %s\n",
plongest (gdbarch->has_dos_based_file_system));
fprintf_unfiltered (file,
"gdbarch_dump: has_global_breakpoints = %s\n",
plongest (gdbarch->has_global_breakpoints));
fprintf_unfiltered (file,
"gdbarch_dump: has_global_solist = %s\n",
plongest (gdbarch->has_global_solist));
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 17:51:43 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: has_shared_address_space = <%s>\n",
host_address_to_string (gdbarch->has_shared_address_space));
fprintf_unfiltered (file,
"gdbarch_dump: have_nonsteppable_watchpoint = %s\n",
plongest (gdbarch->have_nonsteppable_watchpoint));
infrun: step through indirect branch thunks With version 7.3 GCC supports new options -mindirect-branch=<choice> -mfunction-return=<choice> The choices are: keep behaves as before thunk jumps through a thunk thunk-external jumps through an external thunk thunk-inline jumps through an inlined thunk For thunk and thunk-external, GDB would, on a call to the thunk, step into the thunk and then resume to its caller assuming that this is an undebuggable function. On a return thunk, GDB would stop inside the thunk. Make GDB step through such thunks instead. Before: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) 30 } After: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) inc (x=41) at gdb.base/step-indirect-call-thunk.c:23 23 return x + 1; This is independent of the step-mode. In order to step into the thunk, you would need to use stepi. When stepping over an indirect call thunk, GDB would first step through the thunk, then recognize that it stepped into a sub-routine and resume to the caller (of the thunk). Not sure whether this is worth optimizing. Thunk detection is implemented via gdbarch. I implemented the methods for IA. Other architectures may run into unexpected fails. The tests assume a fixed number of instruction steps to reach a thunk. This depends on the compiler as well as the architecture. They may need adjustments when we add support for more architectures. Or we can simply drop those tests that cover being able to step into thunks using instruction stepping. When using an older GCC, the tests will fail to build and will be reported as untested: Running .../gdb.base/step-indirect-call-thunk.exp ... gdb compile failed, \ gcc: error: unrecognized command line option '-mindirect-branch=thunk' gcc: error: unrecognized command line option '-mfunction-return=thunk' === gdb Summary === # of untested testcases 1 gdb/ * infrun.c (process_event_stop_test): Call gdbarch_in_indirect_branch_thunk. * gdbarch.sh (in_indirect_branch_thunk): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * x86-tdep.h: New. * x86-tdep.c: New. * Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o. (HFILES_NO_SRCDIR): Add x86-tdep.h. (ALLDEPFILES): Add x86-tdep.c. * arch-utils.h (default_in_indirect_branch_thunk): New. * arch-utils.c (default_in_indirect_branch_thunk): New. * i386-tdep: Include x86-tdep.h. (i386_in_indirect_branch_thunk): New. (i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch function. * amd64-tdep: Include x86-tdep.h. (amd64_in_indirect_branch_thunk): New. (amd64_init_abi): Set in_indirect_branch_thunk gdbarch function. testsuite/ * gdb.base/step-indirect-call-thunk.exp: New. * gdb.base/step-indirect-call-thunk.c: New. * gdb.reverse/step-indirect-call-thunk.exp: New. * gdb.reverse/step-indirect-call-thunk.c: New.
2018-02-14 21:30:57 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: in_indirect_branch_thunk = <%s>\n",
host_address_to_string (gdbarch->in_indirect_branch_thunk));
fprintf_unfiltered (file,
"gdbarch_dump: in_solib_return_trampoline = <%s>\n",
host_address_to_string (gdbarch->in_solib_return_trampoline));
fprintf_unfiltered (file,
"gdbarch_dump: infcall_mmap = <%s>\n",
host_address_to_string (gdbarch->infcall_mmap));
compile: Use also inferior munmap Currently inferior memory is allocated by inferior mmap() but it is never deallocated; despite the injected objfile incl. its symbols is freed. This was intentional so that one can do for example: inferior: char *str = "foo"; GDB: (gdb) compile code str = "bar"; I believe later patches will be needed to introduce full control over keeping vs. discarding the injected module as being discussed in: compile: objfiles lifetime UI https://sourceware.org/ml/gdb/2015-04/msg00051.html Message-ID: <20150429135735.GA16974@host1.jankratochvil.net> https://sourceware.org/ml/gdb/2015-05/msg00007.html As decided by Phil it is better not to leak inferior pages as users can workaround the issue above for example by: (gdb) compile code str = strdup ("bar"); I have checked that in fact gdb/doc/ (written by Phil) already expects the injected code will be unmapped so that does not need to be changed: compile code int ff = 5; p = &ff; In this example, @code{p} would point to @code{ff} when the @code{compile} command is executing the source code provided to it. However, as variables in the (example) program persist with their assigned values, the variable @code{p} would point to an invalid location when the command exists. gdb/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * arch-utils.c (default_infcall_munmap): New. * arch-utils.h (default_infcall_munmap): New declaration. * compile/compile-object-load.c (struct munmap_list, munmap_list_add) (munmap_list_free, munmap_listp_free_cleanup): New. (struct setup_sections_data): Add field munmap_list_headp. (setup_sections): Call munmap_list_add. (compile_object_load): New variable munmap_list_head, initialize setup_sections_data.munmap_list_headp, return munmap_list_head. * compile/compile-object-load.h (struct munmap_list): New declaration. (struct compile_module): Add field munmap_list_head. (munmap_list_free): New declaration. * compile/compile-object-run.c (struct do_module_cleanup): Add field munmap_list_head. (do_module_cleanup): Call munmap_list_free. (compile_object_run): Pass munmap_list_head to do_module_cleanup. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (infcall_munmap): New. * linux-tdep.c (linux_infcall_munmap): New. (linux_init_abi): Install it. gdb/testsuite/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.compile/compile.exp (keep jit in memory): Rename to ... (do not keep jit in memory): ... this. (expect 5): Change it to ... (expect no 5): ... this.
2015-06-04 03:22:56 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: infcall_munmap = <%s>\n",
host_address_to_string (gdbarch->infcall_munmap));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_info_proc_p() = %d\n",
gdbarch_info_proc_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: info_proc = <%s>\n",
host_address_to_string (gdbarch->info_proc));
fprintf_unfiltered (file,
"gdbarch_dump: inner_than = <%s>\n",
host_address_to_string (gdbarch->inner_than));
fprintf_unfiltered (file,
"gdbarch_dump: insn_is_call = <%s>\n",
host_address_to_string (gdbarch->insn_is_call));
fprintf_unfiltered (file,
"gdbarch_dump: insn_is_jump = <%s>\n",
host_address_to_string (gdbarch->insn_is_jump));
fprintf_unfiltered (file,
"gdbarch_dump: insn_is_ret = <%s>\n",
host_address_to_string (gdbarch->insn_is_ret));
fprintf_unfiltered (file,
"gdbarch_dump: int_bit = %s\n",
plongest (gdbarch->int_bit));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_integer_to_address_p() = %d\n",
gdbarch_integer_to_address_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: integer_to_address = <%s>\n",
host_address_to_string (gdbarch->integer_to_address));
New "iterate_over_objfiles_in_search_order" gdbarch method. This patch introduces the "iterate_over_objfiles_in_search_order" gdbarch method, as well as its default implementation, and converts the areas where it will matter to using this gdbarch method. The default method implementation is the only one installed, and the changes should have no functional impact in terms of behavior. This only paves the way for the architectures that will need their own version. gdb/ChangeLog: * gdbarch.sh: Add generation of "iterate_over_objfiles_in_search_order_cb_ftype" typedef in gdbarch.h. Add include of "objfiles.h" in gdbarch.c. (iterate_over_objfiles_in_search_order): New gdbarch method. * gdbarch.h, gdbarch.c: Regenerate. * objfiles.h (default_iterate_over_objfiles_in_search_order): Add declaration. * objfiles.c (default_iterate_over_objfiles_in_search_order): New function. * symtab.c (lookup_symbol_aux_objfile): New function, extracted out of lookup_symbol_aux_symtabs. (lookup_symbol_aux_symtabs): Replace extracted-out code by call to lookup_symbol_aux_objfile. (struct global_sym_lookup_data): New type. (lookup_symbol_global_iterator_cb): New function. (lookup_symbol_global): Search for symbol using gdbarch_iterate_over_objfiles_in_search_order and lookup_symbol_global_iterator_cb. * findvar.c (struct minsym_lookup_data): New type. (minsym_lookup_iterator_cb): New function. (default_read_var_value) [case LOC_UNRESOLVED]: Resolve the symbol's address via gdbarch_iterate_over_objfiles_in_search_order and minsym_lookup_iterator_cb.
2012-06-05 21:50:50 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: iterate_over_objfiles_in_search_order = <%s>\n",
host_address_to_string (gdbarch->iterate_over_objfiles_in_search_order));
Replace 'core_regset_sections' by iterator method The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator.
2014-09-04 23:26:43 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_iterate_over_regset_sections_p() = %d\n",
gdbarch_iterate_over_regset_sections_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: iterate_over_regset_sections = <%s>\n",
host_address_to_string (gdbarch->iterate_over_regset_sections));
fprintf_unfiltered (file,
"gdbarch_dump: long_bit = %s\n",
plongest (gdbarch->long_bit));
fprintf_unfiltered (file,
"gdbarch_dump: long_double_bit = %s\n",
plongest (gdbarch->long_double_bit));
fprintf_unfiltered (file,
"gdbarch_dump: long_double_format = %s\n",
pformat (gdbarch->long_double_format));
fprintf_unfiltered (file,
"gdbarch_dump: long_long_bit = %s\n",
plongest (gdbarch->long_long_bit));
* gdbarch.sh (make_corefile_notes): New architecture callback. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes before target_make_corefile_notes. If NULL is returned, the target does not support core file generation. * linux-nat.c: Include "linux-tdep.h". (find_signalled_thread, find_stop_signal): Remove. (linux_nat_do_thread_registers): Likewise. (struct linux_nat_corefile_thread_data): Likewise. (linux_nat_corefile_thread_callback): Likewise. (iterate_over_spus): Likewise. (struct linux_spu_corefile_data): Likewise. (linux_spu_corefile_callback): Likewise. (linux_spu_make_corefile_notes): Likewise. (linux_nat_collect_thread_registers): New function. (linux_nat_make_corefile_notes): Replace contents by call to linux_make_corefile_notes passing linux_nat_collect_thread_registers as native-only callback. * linux-tdep.h: Include "bfd.h". (struct regcache): Add forward declaration. (linux_collect_thread_registers_ftype): New typedef. (linux_make_corefile_notes): Add prototype. * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h", "regset.h", and "elf-bfd.h". (find_signalled_thread, find_stop_signal): New functions. (linux_spu_make_corefile_notes): Likewise. (linux_collect_thread_registers): Likewise. (struct linux_corefile_thread_data): New data structure. (linux_corefile_thread_callback): New funcion. (linux_make_corefile_notes): Likewise. (linux_make_corefile_notes_1): Likewise. (linux_init_abi): Install it.
2012-01-20 17:56:56 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_make_corefile_notes_p() = %d\n",
gdbarch_make_corefile_notes_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: make_corefile_notes = <%s>\n",
host_address_to_string (gdbarch->make_corefile_notes));
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: make_symbol_special = <%s>\n",
host_address_to_string (gdbarch->make_symbol_special));
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_max_insn_length_p() = %d\n",
gdbarch_max_insn_length_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: max_insn_length = %s\n",
plongest (gdbarch->max_insn_length));
fprintf_unfiltered (file,
"gdbarch_dump: memory_insert_breakpoint = <%s>\n",
host_address_to_string (gdbarch->memory_insert_breakpoint));
fprintf_unfiltered (file,
"gdbarch_dump: memory_remove_breakpoint = <%s>\n",
host_address_to_string (gdbarch->memory_remove_breakpoint));
fprintf_unfiltered (file,
"gdbarch_dump: num_pseudo_regs = %s\n",
plongest (gdbarch->num_pseudo_regs));
fprintf_unfiltered (file,
"gdbarch_dump: num_regs = %s\n",
plongest (gdbarch->num_regs));
fprintf_unfiltered (file,
"gdbarch_dump: osabi = %s\n",
plongest (gdbarch->osabi));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_overlay_update_p() = %d\n",
gdbarch_overlay_update_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: overlay_update = <%s>\n",
host_address_to_string (gdbarch->overlay_update));
fprintf_unfiltered (file,
"gdbarch_dump: pc_regnum = %s\n",
plongest (gdbarch->pc_regnum));
fprintf_unfiltered (file,
"gdbarch_dump: pointer_to_address = <%s>\n",
host_address_to_string (gdbarch->pointer_to_address));
fprintf_unfiltered (file,
"gdbarch_dump: print_auxv_entry = <%s>\n",
host_address_to_string (gdbarch->print_auxv_entry));
fprintf_unfiltered (file,
"gdbarch_dump: print_float_info = <%s>\n",
host_address_to_string (gdbarch->print_float_info));
fprintf_unfiltered (file,
"gdbarch_dump: print_insn = <%s>\n",
host_address_to_string (gdbarch->print_insn));
fprintf_unfiltered (file,
"gdbarch_dump: print_registers_info = <%s>\n",
host_address_to_string (gdbarch->print_registers_info));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_print_vector_info_p() = %d\n",
gdbarch_print_vector_info_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: print_vector_info = <%s>\n",
host_address_to_string (gdbarch->print_vector_info));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_process_record_p() = %d\n",
gdbarch_process_record_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: process_record = <%s>\n",
host_address_to_string (gdbarch->process_record));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_process_record_signal_p() = %d\n",
gdbarch_process_record_signal_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: process_record_signal = <%s>\n",
host_address_to_string (gdbarch->process_record_signal));
fprintf_unfiltered (file,
"gdbarch_dump: ps_regnum = %s\n",
plongest (gdbarch->ps_regnum));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_pseudo_register_read_p() = %d\n",
gdbarch_pseudo_register_read_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: pseudo_register_read = <%s>\n",
host_address_to_string (gdbarch->pseudo_register_read));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_pseudo_register_read_value_p() = %d\n",
gdbarch_pseudo_register_read_value_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: pseudo_register_read_value = <%s>\n",
host_address_to_string (gdbarch->pseudo_register_read_value));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_pseudo_register_write_p() = %d\n",
gdbarch_pseudo_register_write_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: pseudo_register_write = <%s>\n",
host_address_to_string (gdbarch->pseudo_register_write));
fprintf_unfiltered (file,
"gdbarch_dump: ptr_bit = %s\n",
plongest (gdbarch->ptr_bit));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_push_dummy_call_p() = %d\n",
gdbarch_push_dummy_call_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: push_dummy_call = <%s>\n",
host_address_to_string (gdbarch->push_dummy_call));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_push_dummy_code_p() = %d\n",
gdbarch_push_dummy_code_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: push_dummy_code = <%s>\n",
host_address_to_string (gdbarch->push_dummy_code));
fprintf_unfiltered (file,
"gdbarch_dump: ravenscar_ops = %s\n",
host_address_to_string (gdbarch->ravenscar_ops));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_read_pc_p() = %d\n",
gdbarch_read_pc_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: read_pc = <%s>\n",
host_address_to_string (gdbarch->read_pc));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_record_special_symbol_p() = %d\n",
gdbarch_record_special_symbol_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: record_special_symbol = <%s>\n",
host_address_to_string (gdbarch->record_special_symbol));
fprintf_unfiltered (file,
"gdbarch_dump: register_name = <%s>\n",
host_address_to_string (gdbarch->register_name));
fprintf_unfiltered (file,
"gdbarch_dump: register_reggroup_p = <%s>\n",
host_address_to_string (gdbarch->register_reggroup_p));
fprintf_unfiltered (file,
"gdbarch_dump: register_sim_regno = <%s>\n",
host_address_to_string (gdbarch->register_sim_regno));
fprintf_unfiltered (file,
"gdbarch_dump: register_to_value = <%s>\n",
host_address_to_string (gdbarch->register_to_value));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_register_type_p() = %d\n",
gdbarch_register_type_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: register_type = <%s>\n",
host_address_to_string (gdbarch->register_type));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_relocate_instruction_p() = %d\n",
gdbarch_relocate_instruction_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: relocate_instruction = <%s>\n",
host_address_to_string (gdbarch->relocate_instruction));
* Makefile.in (arm-tdep.o, eval.o, target-descriptions.o) (xml-tdesc.o): Update. * xml-support.c: Add a comment. (gdb_xml_enums_boolean): New variable. (gdb_xml_parse_attr_enum): Use strcasecmp. * xml-support.h (gdb_xml_enums_boolean): Declare. * xml-tdesc.c (struct tdesc_parsing_data): Record current_feature, next_regnum, and current_union. (tdesc_start_feature, tdesc_start_reg, tdesc_start_union) (tdesc_end_union, tdesc_start_field, tdesc_start_vector) (field_attributes, union_children, reg_attributes, union_attributes) (vector_attributes, feature_attributes, feature_children): New. (target_children): Make static. Add <feature>. (tdesc_elements): Make static. * target-descriptions.c (struct tdesc_reg, tdesc_reg_p, type_p) (struct tdesc_feature, tdesc_feature_p): New types. (struct target_desc): Add features member. (struct tdesc_arch_data, tdesc_data): New. (target_find_description): Clarify error message. Warn about ignored register descriptions. (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_data_init, tdesc_data_alloc) (tdesc_data_cleanup, tdesc_numbered_register) (tdesc_numbered_register_choices, tdesc_find_register) (tdesc_register_name, tdesc_register_type) (tdesc_remote_register_number, tdesc_register_reggroup_p) (set_tdesc_pseudo_register_name, set_tdesc_pseudo_register_type) (set_tdesc_pseudo_register_reggroup_p, tdesc_use_registers) (tdesc_free_reg, tdesc_create_reg, tdesc_free_feature) (tdesc_create_feature, tdesc_record_type): New. (free_target_description): Free features. (_initialize_target_descriptions): Initialize tdesc_data. * arch-utils.c (default_remote_register_number): New. * arch-utils.h (default_remote_register_number): New prototype. * target-descriptions.h (set_tdesc_pseudo_register_name) (set_tdesc_pseudo_register_type, set_tdesc_pseudo_register_reggroup_p) (tdesc_use_registers, tdesc_data_alloc, tdesc_data_cleanup) (tdesc_numbered_register, tdesc_numbered_register_choices) (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_create_feature, tdesc_record_type) (tdesc_create_reg): Declare. * gdbarch.sh (remote_register_number): New entry. * gdbarch.c, gdbarch.h: Regenerate. * remote.c (init_remote_state): Use gdbarch_remote_register_number. * features/gdb-target.dtd: Add feature, reg, vector, union, and field. * arm-tdep.c (arm_register_aliases): New. (arm_register_name_strings): Rename to... (arm_register_names): ...this. Make const. Delete the old version. (current_option, arm_register_byte): Delete. (set_disassembly_style): Simplify. Do not adjust arm_register_names. (value_of_arm_user_reg): New. (arm_gdbarch_init): Verify any described registers. Call tdesc_use_registers. Don't use arm_register_byte. Create aliases for standard register names. (_initialize_arm_tdep): Do not adjust arm_register_names. * user-regs.c (struct user_reg): Add baton member. (append_user_reg, user_reg_add_builtin, user_regs_init) (user_reg_add, value_of_user_reg): Use a baton for user register functions. * std-regs.c: Update. * user-regs.h (user_reg_read_ftype, user_reg_add_builtin) (user_reg_add): Add baton argument. * NEWS: Mention target description register support. * features/arm-core.xml, features/arm-fpa.xml: New. * eval.c (evaluate_subexp_standard): Allow ptype $register when the program is not running. * gdb.texinfo (-target-disconnect): Use @smallexample. (Requirements): Add anchor for Expat. Update description. (Target Descriptions): Mention Expat. (Target Description Format): Document new elements. Use @smallexample. (Predefined Target Types, Standard Target Features): New sections. * doc/gdbint.texinfo (Target Descriptions): New section. * gdb.xml/single-reg.xml, gdb.xml/tdesc-regs.exp, gdb.xml/core-only.xml, gdb.xml/extra-regs.xml: New files.
2007-02-09 05:00:36 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: remote_register_number = <%s>\n",
host_address_to_string (gdbarch->remote_register_number));
fprintf_unfiltered (file,
"gdbarch_dump: return_in_first_hidden_param_p = <%s>\n",
host_address_to_string (gdbarch->return_in_first_hidden_param_p));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_return_value_p() = %d\n",
gdbarch_return_value_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: return_value = <%s>\n",
host_address_to_string (gdbarch->return_value));
fprintf_unfiltered (file,
"gdbarch_dump: sdb_reg_to_regnum = <%s>\n",
host_address_to_string (gdbarch->sdb_reg_to_regnum));
fprintf_unfiltered (file,
"gdbarch_dump: short_bit = %s\n",
plongest (gdbarch->short_bit));
Clear non-significant bits of address on memory access ARMv8 supports tagged address, that is, the top one byte in address is ignored. It is always enabled on aarch64-linux. See https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt The tag in the tagged address is modeled as non-significant bits in address, so this patch adds a new gdbarch method significant_addr_bit and clear the non-significant bits (the top byte in ARMv8) of the virtual address at the point before passing address to target cache layer. IOW, the address used in the target cache layer is already cleared. Before this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: Cannot access memory at address 0xf000000000411030 After this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: 0x00000000 Note that I used address_significant in paddress, but it causes a regression gdb.base/long_long.exp, because gdb clears the non-significant bits in address, but test still expects them. p/a val.oct^M $24 = 0x2ee53977053977^M (gdb) FAIL: gdb.base/long_long.exp: p/a val.oct so I defer the change there. gdb: 2017-12-08 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_gdbarch_init): Install gdbarch significant_addr_bit. * gdbarch.sh (significant_addr_bit): New. * gdbarch.c, gdbarch.h: Re-generated. * target.c (memory_xfer_partial): Call address_significant. * utils.c (address_significant): New function. * utils.h (address_significant): Declare. 2017-12-08 Yao Qi <yao.qi@linaro.org> gdb/testsuite: * gdb.arch/aarch64-tagged-pointer.c: New file. * gdb.arch/aarch64-tagged-pointer.exp: New file.
2017-12-09 01:27:03 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: significant_addr_bit = %s\n",
plongest (gdbarch->significant_addr_bit));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_single_step_through_delay_p() = %d\n",
gdbarch_single_step_through_delay_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: single_step_through_delay = <%s>\n",
host_address_to_string (gdbarch->single_step_through_delay));
PowerPC64 ELFv2 ABI: skip global entry point code This patch handles another aspect of the ELFv2 ABI, which unfortunately requires common code changes. In ELFv2, functions may provide both a global and a local entry point. The global entry point (where the function symbol points to) is intended to be used for function-pointer or cross-module (PLT) calls, and requires r12 to be set up to the entry point address itself. The local entry point (which is found at a fixed offset after the global entry point, as defined by bits in the symbol table entries' st_other field), instead expects r2 to be set up to the current TOC. Now, when setting a breakpoint on a function by name, you really want that breakpoint to trigger either way, no matter whether the function is called via its local or global entry point. Since the global entry point will always fall through into the local entry point, the way to achieve that is to simply set the breakpoint at the local entry point. One way to do that would be to have prologue parsing skip the code sequence that makes up the global entry point. Unfortunately, this does not work reliably, since -for optimized code- GDB these days will not actuall invoke the prologue parsing code but instead just set the breakpoint at the symbol address and rely on DWARF being correct at any point throughout the function ... Unfortunately, I don't really see any way to express the notion of local entry points with the current set of gdbarch callbacks. Thus this patch adds a new callback, skip_entrypoint, that is somewhat analogous to skip_prologue, but is called every time GDB needs to determine a function start address, even in those cases where GDB decides to not call skip_prologue. As a side effect, the skip_entrypoint implementation on ppc64 does not need to perform any instruction parsing; it can simply rely on the local entry point flags in the symbol table entry. With this implemented, two test cases would still fail to set the breakpoint correctly, but that's because they use the construct: gdb_test "break *hello" Now, using "*hello" explicitly instructs GDB to set the breakpoint at the numerical value of "hello" treated as function pointer, so it will by definition only hit the global entry point. I think this behaviour is unavoidable, but acceptable -- most people do not use this construct, and if they do, they get what they asked for ... In one of those two test cases, use of this construct is really not appropriate. I think this was added way back when as a means to work around prologue skipping problems on some platforms. These days that shouldn't really be necessary any more ... For the other (step-bt), we really want to make sure backtracing works on the very first instruction of the routine. To enable that test also on powerpc64le-linux, we can modify the code to call the test function via function pointer (which makes it use the global entry point in the ELFv2 ABI). gdb/ChangeLog: * gdbarch.sh (skip_entrypoint): New callback. * gdbarch.c, gdbarch.h: Regenerate. * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint. * infrun.c (fill_in_stop_func): Likewise. * ppc-linux-tdep.c: Include "elf/ppc64.h". (ppc_elfv2_elf_make_msymbol_special): New function. (ppc_elfv2_skip_entrypoint): Likewise. (ppc_linux_init_abi): Install them for ELFv2. gdb/testsuite/ChangeLog: * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint on a function. * gdb.base/step-bt.c: Call hello via function pointer to make sure its first instruction is executed on powerpc64le-linux.
2014-02-05 01:44:14 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_skip_entrypoint_p() = %d\n",
gdbarch_skip_entrypoint_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: skip_entrypoint = <%s>\n",
host_address_to_string (gdbarch->skip_entrypoint));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_skip_main_prologue_p() = %d\n",
gdbarch_skip_main_prologue_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: skip_main_prologue = <%s>\n",
host_address_to_string (gdbarch->skip_main_prologue));
fprintf_unfiltered (file,
"gdbarch_dump: skip_permanent_breakpoint = <%s>\n",
host_address_to_string (gdbarch->skip_permanent_breakpoint));
fprintf_unfiltered (file,
"gdbarch_dump: skip_prologue = <%s>\n",
host_address_to_string (gdbarch->skip_prologue));
fprintf_unfiltered (file,
"gdbarch_dump: skip_solib_resolver = <%s>\n",
host_address_to_string (gdbarch->skip_solib_resolver));
fprintf_unfiltered (file,
"gdbarch_dump: skip_trampoline_code = <%s>\n",
host_address_to_string (gdbarch->skip_trampoline_code));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_software_single_step_p() = %d\n",
gdbarch_software_single_step_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: software_single_step = <%s>\n",
host_address_to_string (gdbarch->software_single_step));
* gdbarch.sh (sofun_address_maybe_missing): New gdbarch variable. * gdbarch.c, gdbarch.h: Regenerate. * dbxread.c (find_stab_function_addr): Define unconditionally. (read_dbx_symtab): Use gdbarch_sofun_address_maybe_missing instead of SOFUN_ADDRESS_MAYBE_MISSING. (end_psymtab): Likewise. (process_one_symbol): Likewise. * mdebugread.c (parse_partial_symbols): Likewise. * symtab.h (struct minimal_symbol): Always define "filename" member. * elfread.c (elf_symtab_read): Use msym->filename unconditionally. * minsyms.c (lookup_minimal_symbol): Likewise. * symmisc.c (dump_msymbols): Likewise. * config/i386/i386sol2.mt (DEPRECATED_TM_FILE): Remove. * config/i386/linux.mt (DEPRECATED_TM_FILE): Remove. * config/i386/tm-i386sol2.h: Remove file. * config/i386/tm-linux.h: Remove file. * i386-linux-tdep.c (i386_linux_init_abi): Add call to set_gdbarch_sofun_address_maybe_missing. * i386-sol2-tdep.c (i386_sol2_init_abi): Likewise. * config/powerpc/linux.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/nbsd.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/ppc-eabi.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/ppc-sim.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/tm-ppc-eabi.h: Remove file. * rs6000-tdep.c (rs6000_gdbarch_init): Add call to set_gdbarch_sofun_address_maybe_missing. * config/sparc/sol2-64.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/sol2.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/tm-sol2.h: Remove file. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Add call to set_gdbarch_sofun_address_maybe_missing. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Likewise. doc/ChangeLog: * gdbarch.texi (Target Conditionals): Remove documentation of SOFUN_ADDRESS_MAYBE_MISSING, replaced by ... (Compiler Characteristics): ... documentation of set_gdbarch_sofun_address_maybe_missing.
2007-10-19 20:26:35 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: sofun_address_maybe_missing = %s\n",
plongest (gdbarch->sofun_address_maybe_missing));
fprintf_unfiltered (file,
"gdbarch_dump: solib_symbols_extension = %s\n",
pstring (gdbarch->solib_symbols_extension));
fprintf_unfiltered (file,
"gdbarch_dump: sp_regnum = %s\n",
plongest (gdbarch->sp_regnum));
fprintf_unfiltered (file,
"gdbarch_dump: stab_reg_to_regnum = <%s>\n",
host_address_to_string (gdbarch->stab_reg_to_regnum));
fprintf_unfiltered (file,
"gdbarch_dump: stabs_argument_has_addr = <%s>\n",
host_address_to_string (gdbarch->stabs_argument_has_addr));
fprintf_unfiltered (file,
"gdbarch_dump: stack_frame_destroyed_p = <%s>\n",
host_address_to_string (gdbarch->stack_frame_destroyed_p));
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: stap_gdb_register_prefix = %s\n",
pstring (gdbarch->stap_gdb_register_prefix));
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: stap_gdb_register_suffix = %s\n",
pstring (gdbarch->stap_gdb_register_suffix));
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
fprintf_unfiltered (file,
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
"gdbarch_dump: stap_integer_prefixes = %s\n",
pstring_list (gdbarch->stap_integer_prefixes));
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
fprintf_unfiltered (file,
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
"gdbarch_dump: stap_integer_suffixes = %s\n",
pstring_list (gdbarch->stap_integer_suffixes));
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_stap_is_single_operand_p() = %d\n",
gdbarch_stap_is_single_operand_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: stap_is_single_operand = <%s>\n",
host_address_to_string (gdbarch->stap_is_single_operand));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_stap_parse_special_token_p() = %d\n",
gdbarch_stap_parse_special_token_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: stap_parse_special_token = <%s>\n",
host_address_to_string (gdbarch->stap_parse_special_token));
fprintf_unfiltered (file,
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
"gdbarch_dump: stap_register_indirection_prefixes = %s\n",
pstring_list (gdbarch->stap_register_indirection_prefixes));
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
fprintf_unfiltered (file,
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
"gdbarch_dump: stap_register_indirection_suffixes = %s\n",
pstring_list (gdbarch->stap_register_indirection_suffixes));
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
fprintf_unfiltered (file,
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
"gdbarch_dump: stap_register_prefixes = %s\n",
pstring_list (gdbarch->stap_register_prefixes));
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
fprintf_unfiltered (file,
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
"gdbarch_dump: stap_register_suffixes = %s\n",
pstring_list (gdbarch->stap_register_suffixes));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_static_transform_name_p() = %d\n",
gdbarch_static_transform_name_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: static_transform_name = <%s>\n",
host_address_to_string (gdbarch->static_transform_name));
New gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind This patch adds two gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind, and uses target_info.placed_size as "kind" of the breakpoint. This patch updates the usages of target_info.placed_size. The "kind" of a breakpoint is determined by gdbarch rather than target, so we have gdbarch method breakpoint_kind_from_pc, and we should set target_info.placed_size out of each implementation of target to_insert_breakpoint. In this way, each target doesn't have to set target_info.placed_size any more. This patch also sets target_info.placed_address before target_insert_breakpoint too, so that target to_insert_breakpoint can use it, see record_full_insert_breakpoint. Before we call target_insert_breakpoint, we set target_info.placed_address and target_info.placed_size like this, CORE_ADDR addr = bl->target_info.reqstd_address; bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr); bl->target_info.placed_address = addr; return target_insert_breakpoint (bl->gdbarch, &bl->target_info); target_insert_breakpoint may fail, but it doesn't matter to the "kind" and "placed_address" of a breakpoint. They should be determined by gdbarch. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define breakpoint_kind_from_pc and sw_breakpoint_from_kind. (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call set_gdbarch_breakpoint_kind_from_pc and set_gdbarch_sw_breakpoint_from_kind. * arm-tdep.c: Add comments. * bfin-tdep.c: Likewise. * breakpoint.c (breakpoint_kind): New function. (insert_bp_location): Set target_info.placed_size and target_info.placed_address. (bkpt_insert_location): Likewise. * cris-tdep.c: Add comments. * gdbarch.sh (breakpoint_kind_from_pc): New. (sw_breakpoint_from_kind): New. * gdbarch.c, gdbarch.h: Regenerated. * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set bp_tgt->placed_size. (ia64_memory_remove_breakpoint): Don't assert bp_tgt->placed_size. (ia64_breakpoint_kind_from_pc): New function. (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc. * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set bp_tgt->placed_size. * mem-break.c (default_memory_insert_breakpoint): Don't set bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind. (default_memory_remove_breakpoint): Call gdbarch_sw_breakpoint_from_kind. (memory_validate_breakpoint): Don't check bp_tgt->placed_size. * mips-tdep.c: Add comments. * mt-tdep.c: Likewise. * nios2-tdep.c: Likewise. * record-full.c (record_full_insert_breakpoint): Don't call gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address and bp_tgt->placed_size. * remote.c (remote_insert_breakpoint): Don't call gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size. Don't set bp_tgt->placed_address and bp_tgt->placed_size. (remote_insert_hw_breakpoint): Likewise. * score-tdep.c: Likewise. * sh-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * v850-tdep.c: Likewise. * xtensa-tdep.c: Likewise.
2016-11-03 22:35:13 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: sw_breakpoint_from_kind = <%s>\n",
host_address_to_string (gdbarch->sw_breakpoint_from_kind));
Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead of global This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function.
2014-11-21 01:28:18 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: syscalls_info = %s\n",
host_address_to_string (gdbarch->syscalls_info));
fprintf_unfiltered (file,
"gdbarch_dump: target_desc = %s\n",
host_address_to_string (gdbarch->target_desc));
fprintf_unfiltered (file,
"gdbarch_dump: type_align = <%s>\n",
host_address_to_string (gdbarch->type_align));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_unwind_pc_p() = %d\n",
gdbarch_unwind_pc_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: unwind_pc = <%s>\n",
host_address_to_string (gdbarch->unwind_pc));
fprintf_unfiltered (file,
"gdbarch_dump: gdbarch_unwind_sp_p() = %d\n",
gdbarch_unwind_sp_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: unwind_sp = <%s>\n",
host_address_to_string (gdbarch->unwind_sp));
GDB: Add support for the new set/show disassembler-options commands. This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-03-01 02:32:07 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: valid_disassembler_options = %s\n",
host_address_to_string (gdbarch->valid_disassembler_options));
fprintf_unfiltered (file,
"gdbarch_dump: value_from_register = <%s>\n",
host_address_to_string (gdbarch->value_from_register));
fprintf_unfiltered (file,
"gdbarch_dump: value_to_register = <%s>\n",
host_address_to_string (gdbarch->value_to_register));
* NEWS: Mention pointer to member improvements. * Makefile.in (gnu-v3-abi.o): Delete special rule. (eval.o, gnu-v3-abi.o, ia64-tdep.o): Update. * ada-valprint.c (ada_print_scalar): Update for new type codes. * c-typeprint.c (c_print_type): Update for new type codes. (c_type_print_varspec_prefix, c_type_print_varspec_suffix) (c_type_print_base): Likewise. (c_type_print_args): Rewrite. * c-valprint.c (c_val_print): Update for new type codes. Remove support for references to members. Treat methods like functions. * cp-abi.c (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New. * cp-abi.h (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New prototypes. (struct cp_abi_ops): Add corresponding members. * cp-valprint.c (cp_print_class_method): Delete. (cp_find_class_member): New function. (cp_print_class_member): Use it. Simplify support for bogus member pointers. * dwarf2read.c (quirk_gcc_member_function_pointer): Use lookup_methodptr_type. (read_tag_ptr_to_member_type): Likewise, and lookup_memberptr_type. * eval.c (evaluate_subexp_standard): Implement EVAL_SKIP for OP_SCOPE. Update call to value_aggregate_elt. Rewrite member pointer support. (evaluate_subexp_for_address): Handle OP_SCOPE explicitly. Handle references returned by user defined operators. * f-typeprint.c (f_print_type, f_type_print_varspec_prefix) (f_type_print_varspec_suffix): Remove support for member pointers. * gdbtypes.c (lookup_memberptr_type): Renamed from lookup_member_type and adjusted. (smash_to_memberptr_type): Likewise, from smash_to_member_type. (lookup_methodptr_type): New. (rank_one_type): Adjust for TYPE_CODE_MEMBERPTR. (recursive_dump_type): Update for new types. * gdbtypes.h (enum type_code): Replace TYPE_CODE_MEMBER with TYPE_CODE_MEMBERPTR and TYPE_CODE_METHODPTR. (lookup_memberptr_type, lookup_methodptr_type) (smash_to_memberptr_type): New prototypes. (smash_to_method_type): Formatting fix. (lookup_member_type, smash_to_member_type): Delete prototypes. * gnu-v3-abi.c (gnuv3_get_vtable, gnuv3_get_virtual_fn): New. Do not rely on debug information for the vptr or the method's enclosing type. Handle function descriptors for IA64. (gnuv3_virtual_fn_field): Rewrite using the new functions. (gnuv3_find_method_in, gnuv3_print_method_ptr) (gnuv3_method_ptr_size, gnuv3_make_method_ptr) (gnuv3_method_ptr_to_value): New. (init_gnuv3_ops): Set new members of gnu_v3_abi_ops. * hpread.c (hpread_type_lookup): Update for new types. * infcall.c (value_arg_coerce): Likewise. * m2-typeprint.c (m2_print_type): Remove explicit support for member pointers. * m2-valprint.c (m2_val_print): Likewise. * p-typeprint.c (pascal_type_print_varspec_prefix) (pascal_type_print_varspec_suffix, pascal_type_print_base): Likewise. * p-valprint.c (pascal_val_print): Likewise. (pascal_object_print_class_method, pascal_object_print_class_member): Delete. * p-lang.h (pascal_object_print_class_method) (pascal_object_print_class_member): Delete prototypes. * stabsread.c (read_type): Update for new types. * typeprint.c (print_type_scalar): Likewise. * valops.c (value_struct_elt_for_reference, value_namespace_elt) (value_maybe_namespace_elt, value_aggregate_elt): Add want_address argument. Construct a pointer to member if the address of a function or data member is requested. (value_cast_pointers): Don't modify the input value. (value_cast): Adjust pointer to member handling for new types. Allow null pointer to member constants. Don't modify the input value. (value_ind): Remove pointer to member check. Handle function descriptors for function pointers. (value_struct_elt, value_find_oload_method_list, check_field): Remove pointer to member checks. * value.c (unpack_long): Allow pointers to data members. (value_from_longest): Allow member pointers. * value.h (value_aggregate_elt): Add want_address. * varobj.c (c_variable_editable): Remove check for members. * gdbarch.sh: Add vtable_function_descriptors and vbit_in_delta. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Handle descriptors in virtual tables. (ia64_gdbarch_init): Call set_gdbarch_vtable_function_descriptors. * c-lang.h (cp_print_class_method): Delete prototype. * arm-tdep.c (arm_gdbarch_init): Call set_gdbarch_vbit_in_delta. * mips-tdep.c (mips_gdbarch_init): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * gdb.cp/classes.exp (test_pointers_to_class_members): Update expected output. Test the types of members and member pointers. * gdb.cp/inherit.exp (test_print_mi_member_types): Remove KFAILs for gdb/2092. * gdb.cp/member-ptr.exp: Search for a comment instead of a statement. Enable for GCC. Update expected output for some tests and add new tests. Remove obsolete GCC KFAILs. Allow GCC's class layout. * gdb.cp/member-ptr.cc (Padding, Padding::vspacer, Base, Base::get_x) (Base::vget_base, Left, Left::vget, Right, Right::vget, Diamond) (Diamond::vget_base): New. (main): Add new tests. * gdb.cp/printmethod.exp: Update expected output for member functions. * gdb.cp/virtfunc.exp (test_virtual_calls): Add a KFAIL for print pEe->D::vg().
2007-01-04 02:05:45 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: vbit_in_delta = %s\n",
plongest (gdbarch->vbit_in_delta));
fprintf_unfiltered (file,
"gdbarch_dump: virtual_frame_pointer = <%s>\n",
host_address_to_string (gdbarch->virtual_frame_pointer));
fprintf_unfiltered (file,
"gdbarch_dump: vsyscall_range = <%s>\n",
host_address_to_string (gdbarch->vsyscall_range));
* NEWS: Mention pointer to member improvements. * Makefile.in (gnu-v3-abi.o): Delete special rule. (eval.o, gnu-v3-abi.o, ia64-tdep.o): Update. * ada-valprint.c (ada_print_scalar): Update for new type codes. * c-typeprint.c (c_print_type): Update for new type codes. (c_type_print_varspec_prefix, c_type_print_varspec_suffix) (c_type_print_base): Likewise. (c_type_print_args): Rewrite. * c-valprint.c (c_val_print): Update for new type codes. Remove support for references to members. Treat methods like functions. * cp-abi.c (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New. * cp-abi.h (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New prototypes. (struct cp_abi_ops): Add corresponding members. * cp-valprint.c (cp_print_class_method): Delete. (cp_find_class_member): New function. (cp_print_class_member): Use it. Simplify support for bogus member pointers. * dwarf2read.c (quirk_gcc_member_function_pointer): Use lookup_methodptr_type. (read_tag_ptr_to_member_type): Likewise, and lookup_memberptr_type. * eval.c (evaluate_subexp_standard): Implement EVAL_SKIP for OP_SCOPE. Update call to value_aggregate_elt. Rewrite member pointer support. (evaluate_subexp_for_address): Handle OP_SCOPE explicitly. Handle references returned by user defined operators. * f-typeprint.c (f_print_type, f_type_print_varspec_prefix) (f_type_print_varspec_suffix): Remove support for member pointers. * gdbtypes.c (lookup_memberptr_type): Renamed from lookup_member_type and adjusted. (smash_to_memberptr_type): Likewise, from smash_to_member_type. (lookup_methodptr_type): New. (rank_one_type): Adjust for TYPE_CODE_MEMBERPTR. (recursive_dump_type): Update for new types. * gdbtypes.h (enum type_code): Replace TYPE_CODE_MEMBER with TYPE_CODE_MEMBERPTR and TYPE_CODE_METHODPTR. (lookup_memberptr_type, lookup_methodptr_type) (smash_to_memberptr_type): New prototypes. (smash_to_method_type): Formatting fix. (lookup_member_type, smash_to_member_type): Delete prototypes. * gnu-v3-abi.c (gnuv3_get_vtable, gnuv3_get_virtual_fn): New. Do not rely on debug information for the vptr or the method's enclosing type. Handle function descriptors for IA64. (gnuv3_virtual_fn_field): Rewrite using the new functions. (gnuv3_find_method_in, gnuv3_print_method_ptr) (gnuv3_method_ptr_size, gnuv3_make_method_ptr) (gnuv3_method_ptr_to_value): New. (init_gnuv3_ops): Set new members of gnu_v3_abi_ops. * hpread.c (hpread_type_lookup): Update for new types. * infcall.c (value_arg_coerce): Likewise. * m2-typeprint.c (m2_print_type): Remove explicit support for member pointers. * m2-valprint.c (m2_val_print): Likewise. * p-typeprint.c (pascal_type_print_varspec_prefix) (pascal_type_print_varspec_suffix, pascal_type_print_base): Likewise. * p-valprint.c (pascal_val_print): Likewise. (pascal_object_print_class_method, pascal_object_print_class_member): Delete. * p-lang.h (pascal_object_print_class_method) (pascal_object_print_class_member): Delete prototypes. * stabsread.c (read_type): Update for new types. * typeprint.c (print_type_scalar): Likewise. * valops.c (value_struct_elt_for_reference, value_namespace_elt) (value_maybe_namespace_elt, value_aggregate_elt): Add want_address argument. Construct a pointer to member if the address of a function or data member is requested. (value_cast_pointers): Don't modify the input value. (value_cast): Adjust pointer to member handling for new types. Allow null pointer to member constants. Don't modify the input value. (value_ind): Remove pointer to member check. Handle function descriptors for function pointers. (value_struct_elt, value_find_oload_method_list, check_field): Remove pointer to member checks. * value.c (unpack_long): Allow pointers to data members. (value_from_longest): Allow member pointers. * value.h (value_aggregate_elt): Add want_address. * varobj.c (c_variable_editable): Remove check for members. * gdbarch.sh: Add vtable_function_descriptors and vbit_in_delta. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Handle descriptors in virtual tables. (ia64_gdbarch_init): Call set_gdbarch_vtable_function_descriptors. * c-lang.h (cp_print_class_method): Delete prototype. * arm-tdep.c (arm_gdbarch_init): Call set_gdbarch_vbit_in_delta. * mips-tdep.c (mips_gdbarch_init): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * gdb.cp/classes.exp (test_pointers_to_class_members): Update expected output. Test the types of members and member pointers. * gdb.cp/inherit.exp (test_print_mi_member_types): Remove KFAILs for gdb/2092. * gdb.cp/member-ptr.exp: Search for a comment instead of a statement. Enable for GCC. Update expected output for some tests and add new tests. Remove obsolete GCC KFAILs. Allow GCC's class layout. * gdb.cp/member-ptr.cc (Padding, Padding::vspacer, Base, Base::get_x) (Base::vget_base, Left, Left::vget, Right, Right::vget, Diamond) (Diamond::vget_base): New. (main): Add new tests. * gdb.cp/printmethod.exp: Update expected output for member functions. * gdb.cp/virtfunc.exp (test_virtual_calls): Add a KFAIL for print pEe->D::vg().
2007-01-04 02:05:45 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: vtable_function_descriptors = %s\n",
plongest (gdbarch->vtable_function_descriptors));
Teach GDB that wchar_t is a built-in type in C++ mode GDB is currently not aware that wchar_t is a built-in type in C++ mode. This is usually not a problem because the debug info describes the type, so when you have a program loaded, you don't notice this. However, if you try expressions involving wchar_t before a program is loaded, gdb errors out: (gdb) p (wchar_t)-1 No symbol table is loaded. Use the "file" command. (gdb) p L"hello" No type named wchar_t. (gdb) ptype L"hello" No type named wchar_t. This commit teaches gdb about the type. After: (gdb) p (wchar_t)-1 $1 = -1 L'\xffffffff' (gdb) p L"hello" $2 = L"hello" (gdb) ptype L"hello" type = wchar_t [6] Unlike char16_t/char32_t, unfortunately, the underlying type of wchar_t is implementation dependent, both size and signness. So this requires adding a couple new gdbarch hooks. I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it seems to me that the majority of the ABIs have a 4-byte signed wchar_t, so that's what I made the default for GDB too. And then I looked for which ports have a 16-bit and/or unsigned wchar_t, and made GDB follow suit. gdb/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>: New enum value. (cplus_language_arch_info): Register cplus_primitive_type_wchar_t. * gdbtypes.h (struct builtin_type) <builtin_wchar>: New field. * gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type. * gdbarch.sh (wchar_bit, wchar_signed): New per-arch values. * gdbarch.h, gdbarch.c: Regenerate. * aarch64-tdep.c (aarch64_gdbarch_init): Override gdbarch_wchar_bit and gdbarch_wchar_signed. * alpha-tdep.c (alpha_gdbarch_init): Likewise. * arm-tdep.c (arm_gdbarch_init): Likewise. * avr-tdep.c (avr_gdbarch_init): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * i386-nto-tdep.c (i386nto_init_abi): Likewise. * i386-tdep.c (i386_go32_init_abi): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * sparc64-tdep.c (sparc64_init_abi): Likewise. * windows-tdep.c (windows_init_abi): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. gdb/testsuite/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * gdb.cp/wide_char_types.c: Include <wchar.h>. (wchar): New global. * gdb.cp/wide_char_types.exp (wide_char_types_program) (do_test_wide_char, wide_char_types_no_program, top level): Add wchar_t testing.
2017-04-12 21:00:49 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: wchar_bit = %s\n",
plongest (gdbarch->wchar_bit));
fprintf_unfiltered (file,
"gdbarch_dump: wchar_signed = %s\n",
plongest (gdbarch->wchar_signed));
fprintf_unfiltered (file,
* gdbarch.sh (read_pc): Add REGCACHE argument. Remove PTID argument. (write_pc): Likewise. Remove default implementation, add predicate. * gdbarch.c, gdbarch.h: Regenerate. * regcache.c (read_pc_pid): Use current regcache instead of calling read_register_pid. (write_pc_pid): Check gdbarch_write_pc predicate, implement default case inline. (generic_target_write_pc): Remove. * inferior.h (generic_target_write_pc): Remove. * frv-tdep.c (frv_gdbarch_init): Do not install it. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * avr-tdep.c (avr_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_register_pid. * hppa-hpux-tdep.c (hppa_hpux_read_pc): Likewise. * hppa-tdep.c (hppa_read_pc): Likewise. * hppa-tdep.h (hppa_read_pc): Likewise. * ia64-tdep.c (ia64_read_pc): Likewise. * m32r-tdep.c (m32r_read_pc): Likewise. * mep-tdep.c (mep_read_pc): Likewise. * mn10300-tdep.c (mn10300_read_pc): Likewise. * spu-tdep.c (spu_read_pc): Likewise. * arm-tdep.c (arm_write_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling write_register_pid. * avr-tdep.c (avr_write_pc): Likewise. * hppa-hpux-tdep.c (hppa_hpux_write_pc): Likewise. * hppa-tdep.c (hppa_write_pc): Likewise. * hppa-tdep.h (hppa_write_pc): Likewise. * i386-linux-tdep.c (i386_linux_write_pc): Likewise. * amd64-linux-tdep.c (amd64_linux_write_pc): Likewise. * ia64-linux-tdep.c (ia64_linux_write_pc): Likewise. * ia64-tdep.c (ia64_write_pc): Likewise. * ia64-tdep.h (ia64_write_pc): Likewise. * m32r-tdep.c (m32r_write_pc): Likewise. * m88k-tdep.c (m88k_write_pc): Likewise. * mep-tdep.c (mep_write_pc): Likewise. * mips-tdep.c (mips_write_pc): Likewise. * mips-linux-tdep.c (mips_linux_write_pc): Likewise. * mn10300-tdep.c (mn10300_write_pc): Likewise. * sparc-tdep.c (sparc_write_pc): Likewise. * spu-tdep.c (spu_write_pc): Likewise. * mips-tdep.c (read_signed_register): Remove. (read_signed_register_pid): Likewise. (mips_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_signed_register_pid.
2007-06-16 06:44:56 +08:00
"gdbarch_dump: gdbarch_write_pc_p() = %d\n",
gdbarch_write_pc_p (gdbarch));
fprintf_unfiltered (file,
"gdbarch_dump: write_pc = <%s>\n",
host_address_to_string (gdbarch->write_pc));
Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead of global This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function.
2014-11-21 01:28:18 +08:00
fprintf_unfiltered (file,
"gdbarch_dump: xml_syscall_file = %s\n",
pstring (gdbarch->xml_syscall_file));
if (gdbarch->dump_tdep != NULL)
gdbarch->dump_tdep (gdbarch, file);
1999-06-15 02:08:47 +08:00
}
struct gdbarch_tdep *
1999-08-31 09:14:27 +08:00
gdbarch_tdep (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_tdep called\n");
return gdbarch->tdep;
}
const struct bfd_arch_info *
1999-08-31 09:14:27 +08:00
gdbarch_bfd_arch_info (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_bfd_arch_info called\n");
return gdbarch->bfd_arch_info;
}
enum bfd_endian
1999-08-31 09:14:27 +08:00
gdbarch_byte_order (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_byte_order called\n");
return gdbarch->byte_order;
}
enum bfd_endian
gdbarch_byte_order_for_code (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_byte_order_for_code called\n");
return gdbarch->byte_order_for_code;
}
enum gdb_osabi
gdbarch_osabi (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_osabi called\n");
return gdbarch->osabi;
}
const struct target_desc *
gdbarch_target_desc (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_target_desc called\n");
return gdbarch->target_desc;
}
int
gdbarch_bits_big_endian (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of bits_big_endian, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_bits_big_endian called\n");
return gdbarch->bits_big_endian;
}
void
set_gdbarch_bits_big_endian (struct gdbarch *gdbarch,
int bits_big_endian)
{
gdbarch->bits_big_endian = bits_big_endian;
}
1999-06-15 02:08:47 +08:00
int
1999-08-31 09:14:27 +08:00
gdbarch_short_bit (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
2000-08-11 10:55:38 +08:00
/* Skip verify of short_bit, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_short_bit called\n");
return gdbarch->short_bit;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_short_bit (struct gdbarch *gdbarch,
int short_bit)
1999-06-15 02:08:47 +08:00
{
gdbarch->short_bit = short_bit;
}
int
1999-08-31 09:14:27 +08:00
gdbarch_int_bit (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
2000-08-11 10:55:38 +08:00
/* Skip verify of int_bit, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_int_bit called\n");
return gdbarch->int_bit;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_int_bit (struct gdbarch *gdbarch,
int int_bit)
1999-06-15 02:08:47 +08:00
{
gdbarch->int_bit = int_bit;
}
int
1999-08-31 09:14:27 +08:00
gdbarch_long_bit (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
2000-08-11 10:55:38 +08:00
/* Skip verify of long_bit, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_long_bit called\n");
return gdbarch->long_bit;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_long_bit (struct gdbarch *gdbarch,
int long_bit)
1999-06-15 02:08:47 +08:00
{
gdbarch->long_bit = long_bit;
}
int
1999-08-31 09:14:27 +08:00
gdbarch_long_long_bit (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
2000-08-11 10:55:38 +08:00
/* Skip verify of long_long_bit, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_long_long_bit called\n");
return gdbarch->long_long_bit;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_long_long_bit (struct gdbarch *gdbarch,
int long_long_bit)
1999-06-15 02:08:47 +08:00
{
gdbarch->long_long_bit = long_long_bit;
}
int
gdbarch_half_bit (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of half_bit, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_half_bit called\n");
return gdbarch->half_bit;
}
void
set_gdbarch_half_bit (struct gdbarch *gdbarch,
int half_bit)
{
gdbarch->half_bit = half_bit;
}
const struct floatformat **
gdbarch_half_format (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_half_format called\n");
return gdbarch->half_format;
}
void
set_gdbarch_half_format (struct gdbarch *gdbarch,
const struct floatformat ** half_format)
{
gdbarch->half_format = half_format;
}
1999-06-15 02:08:47 +08:00
int
1999-08-31 09:14:27 +08:00
gdbarch_float_bit (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
2000-08-11 10:55:38 +08:00
/* Skip verify of float_bit, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_float_bit called\n");
return gdbarch->float_bit;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_float_bit (struct gdbarch *gdbarch,
int float_bit)
1999-06-15 02:08:47 +08:00
{
gdbarch->float_bit = float_bit;
}
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat **
gdbarch_float_format (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_float_format called\n");
return gdbarch->float_format;
}
void
set_gdbarch_float_format (struct gdbarch *gdbarch,
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat ** float_format)
{
gdbarch->float_format = float_format;
}
1999-06-15 02:08:47 +08:00
int
1999-08-31 09:14:27 +08:00
gdbarch_double_bit (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
2000-08-11 10:55:38 +08:00
/* Skip verify of double_bit, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_double_bit called\n");
return gdbarch->double_bit;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_double_bit (struct gdbarch *gdbarch,
int double_bit)
1999-06-15 02:08:47 +08:00
{
gdbarch->double_bit = double_bit;
}
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat **
gdbarch_double_format (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_double_format called\n");
return gdbarch->double_format;
}
void
set_gdbarch_double_format (struct gdbarch *gdbarch,
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat ** double_format)
{
gdbarch->double_format = double_format;
}
1999-06-15 02:08:47 +08:00
int
1999-08-31 09:14:27 +08:00
gdbarch_long_double_bit (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
2000-08-11 10:55:38 +08:00
/* Skip verify of long_double_bit, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_long_double_bit called\n");
return gdbarch->long_double_bit;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_long_double_bit (struct gdbarch *gdbarch,
int long_double_bit)
1999-06-15 02:08:47 +08:00
{
gdbarch->long_double_bit = long_double_bit;
}
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat **
gdbarch_long_double_format (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_long_double_format called\n");
return gdbarch->long_double_format;
}
void
set_gdbarch_long_double_format (struct gdbarch *gdbarch,
* doublest.c (floatformat_from_length): Use the right element from gdbarch floatformats. (floatformat_from_type, extract_typed_floating) (store_typed_floating): Likewise. * doublest.h: Remove declarations for undefined floatformat arrays. * gdbarch.sh (float_format, double_format, long_double_format): Change to pairs. (pformat): Update for pairs. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double) (floatformats_ieee_double_littlebyte_bigword) (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext) (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f) (floatformats_vax_d): New variables. (builtin_type_ieee_single, builtin_type_ieee_double) (builtin_type_arm_ext, builtin_type_ia64_spill) (builtin_type_ia64_quad): Replace arrays with individual types. (builtin_type_ieee_single_big, builtin_type_ieee_single_little) (builtin_type_ieee_double_big, builtin_type_ieee_double_little) (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext) (builtin_type_m88110_ext, builtin_type_m88110_harris_ext) (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword) (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little) (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete unused and endian-specific types. (recursive_dump_type): Update for floatformat pairs. (build_flt): Move higher. Handle bit == -1. Take a floatformat pair. (build_gdbtypes): Use build_flt. (_initialize_gdbtypes): Update set of initialized types. * gdbtypes.h: Update declarations to match gdbtypes.c. (struct main_type): Store a pointer to two floatformats. * arch-utils.c (default_float_format, default_double_format): Delete. * arch-utils.h (default_float_format, default_double_format): Delete. * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c, ia64-tdep.c, iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c, vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.
2007-01-30 01:31:06 +08:00
const struct floatformat ** long_double_format)
{
gdbarch->long_double_format = long_double_format;
}
Teach GDB that wchar_t is a built-in type in C++ mode GDB is currently not aware that wchar_t is a built-in type in C++ mode. This is usually not a problem because the debug info describes the type, so when you have a program loaded, you don't notice this. However, if you try expressions involving wchar_t before a program is loaded, gdb errors out: (gdb) p (wchar_t)-1 No symbol table is loaded. Use the "file" command. (gdb) p L"hello" No type named wchar_t. (gdb) ptype L"hello" No type named wchar_t. This commit teaches gdb about the type. After: (gdb) p (wchar_t)-1 $1 = -1 L'\xffffffff' (gdb) p L"hello" $2 = L"hello" (gdb) ptype L"hello" type = wchar_t [6] Unlike char16_t/char32_t, unfortunately, the underlying type of wchar_t is implementation dependent, both size and signness. So this requires adding a couple new gdbarch hooks. I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it seems to me that the majority of the ABIs have a 4-byte signed wchar_t, so that's what I made the default for GDB too. And then I looked for which ports have a 16-bit and/or unsigned wchar_t, and made GDB follow suit. gdb/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>: New enum value. (cplus_language_arch_info): Register cplus_primitive_type_wchar_t. * gdbtypes.h (struct builtin_type) <builtin_wchar>: New field. * gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type. * gdbarch.sh (wchar_bit, wchar_signed): New per-arch values. * gdbarch.h, gdbarch.c: Regenerate. * aarch64-tdep.c (aarch64_gdbarch_init): Override gdbarch_wchar_bit and gdbarch_wchar_signed. * alpha-tdep.c (alpha_gdbarch_init): Likewise. * arm-tdep.c (arm_gdbarch_init): Likewise. * avr-tdep.c (avr_gdbarch_init): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * i386-nto-tdep.c (i386nto_init_abi): Likewise. * i386-tdep.c (i386_go32_init_abi): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * sparc64-tdep.c (sparc64_init_abi): Likewise. * windows-tdep.c (windows_init_abi): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. gdb/testsuite/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * gdb.cp/wide_char_types.c: Include <wchar.h>. (wchar): New global. * gdb.cp/wide_char_types.exp (wide_char_types_program) (do_test_wide_char, wide_char_types_no_program, top level): Add wchar_t testing.
2017-04-12 21:00:49 +08:00
int
gdbarch_wchar_bit (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of wchar_bit, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_wchar_bit called\n");
return gdbarch->wchar_bit;
}
void
set_gdbarch_wchar_bit (struct gdbarch *gdbarch,
int wchar_bit)
{
gdbarch->wchar_bit = wchar_bit;
}
int
gdbarch_wchar_signed (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Check variable changed from pre-default. */
gdb_assert (gdbarch->wchar_signed != -1);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_wchar_signed called\n");
return gdbarch->wchar_signed;
}
void
set_gdbarch_wchar_signed (struct gdbarch *gdbarch,
int wchar_signed)
{
gdbarch->wchar_signed = wchar_signed;
}
Add gdbarch callback to provide formats for debug info float types At this point, all TYPE_CODE_FLT types carry their floating-point format, except for those creating from reading DWARF or stabs debug info. Those will be addressed by this commit. The main issue here is that we actually have to determine which floating- point format to use. Currently, we only have the type length as input to this decision. In the future, we may hopefully get --at least in DWARF-- additional information to help disambiguate multiple different formats of the same length. For now, we can still look at the type name as a hint. This decision logic is encapsulated in a gdbarch callback to allow platform-specific overrides. The default implementation use the same logic (compare type length against the various gdbarch_..._bit sizes) that is currently implemented in floatformat_from_length. With this commit, all platforms still use the default logic, so there should be no actual change in behavior. A follow-on commit will add support for __float128 on Intel and Power. Once dwarf2read.c and stabsread.c make use of the new callback to determine floating-point formats, we're now sure every TYPE_CODE_FLT type will always carry its format. The commit therefore adds asserts to verify_floatformat to ensure new code will continue to always provide formats, and removes the code in floatformat_from_type that used to handle types with a NULL TYPE_FLOATFORMAT. gdb/ChangeLog: * gdbarch.sh (floatformat_for_type): New gdbarch callback. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (default_floatformat_for_type): New prototype. * arch-utils.c (default_floatformat_for_type): New function. * doublest.c (floatformat_from_length): Remove. (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL. * gdbtypes.c (verify_floatformat): Require non-NULL format. * dwarf2read.c (dwarf2_init_float_type): New function. (read_base_type): Use it. * stabsread.c (dbx_init_float_type): New function. (read_sun_floating_type): Use it. (read_range_type): Likewise. Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
2016-09-06 23:31:53 +08:00
const struct floatformat **
gdbarch_floatformat_for_type (struct gdbarch *gdbarch, const char *name, int length)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->floatformat_for_type != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_floatformat_for_type called\n");
return gdbarch->floatformat_for_type (gdbarch, name, length);
}
void
set_gdbarch_floatformat_for_type (struct gdbarch *gdbarch,
gdbarch_floatformat_for_type_ftype floatformat_for_type)
{
gdbarch->floatformat_for_type = floatformat_for_type;
}
2000-08-11 10:55:38 +08:00
int
gdbarch_ptr_bit (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
2000-08-11 10:55:38 +08:00
/* Skip verify of ptr_bit, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_ptr_bit called\n");
return gdbarch->ptr_bit;
}
void
set_gdbarch_ptr_bit (struct gdbarch *gdbarch,
int ptr_bit)
{
gdbarch->ptr_bit = ptr_bit;
}
int
gdbarch_addr_bit (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Check variable changed from pre-default. */
gdb_assert (gdbarch->addr_bit != 0);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_addr_bit called\n");
return gdbarch->addr_bit;
}
void
set_gdbarch_addr_bit (struct gdbarch *gdbarch,
int addr_bit)
{
gdbarch->addr_bit = addr_bit;
}
int
gdbarch_dwarf2_addr_size (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Check variable changed from pre-default. */
gdb_assert (gdbarch->dwarf2_addr_size != 0);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_dwarf2_addr_size called\n");
return gdbarch->dwarf2_addr_size;
}
void
set_gdbarch_dwarf2_addr_size (struct gdbarch *gdbarch,
int dwarf2_addr_size)
{
gdbarch->dwarf2_addr_size = dwarf2_addr_size;
}
int
gdbarch_char_signed (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Check variable changed from pre-default. */
gdb_assert (gdbarch->char_signed != -1);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_char_signed called\n");
return gdbarch->char_signed;
}
void
set_gdbarch_char_signed (struct gdbarch *gdbarch,
int char_signed)
{
gdbarch->char_signed = char_signed;
}
int
gdbarch_read_pc_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->read_pc != NULL;
}
1999-06-15 02:08:47 +08:00
CORE_ADDR
gdbarch_read_pc (struct gdbarch *gdbarch, readable_regcache *regcache)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->read_pc != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_read_pc called\n");
* gdbarch.sh (read_pc): Add REGCACHE argument. Remove PTID argument. (write_pc): Likewise. Remove default implementation, add predicate. * gdbarch.c, gdbarch.h: Regenerate. * regcache.c (read_pc_pid): Use current regcache instead of calling read_register_pid. (write_pc_pid): Check gdbarch_write_pc predicate, implement default case inline. (generic_target_write_pc): Remove. * inferior.h (generic_target_write_pc): Remove. * frv-tdep.c (frv_gdbarch_init): Do not install it. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * avr-tdep.c (avr_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_register_pid. * hppa-hpux-tdep.c (hppa_hpux_read_pc): Likewise. * hppa-tdep.c (hppa_read_pc): Likewise. * hppa-tdep.h (hppa_read_pc): Likewise. * ia64-tdep.c (ia64_read_pc): Likewise. * m32r-tdep.c (m32r_read_pc): Likewise. * mep-tdep.c (mep_read_pc): Likewise. * mn10300-tdep.c (mn10300_read_pc): Likewise. * spu-tdep.c (spu_read_pc): Likewise. * arm-tdep.c (arm_write_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling write_register_pid. * avr-tdep.c (avr_write_pc): Likewise. * hppa-hpux-tdep.c (hppa_hpux_write_pc): Likewise. * hppa-tdep.c (hppa_write_pc): Likewise. * hppa-tdep.h (hppa_write_pc): Likewise. * i386-linux-tdep.c (i386_linux_write_pc): Likewise. * amd64-linux-tdep.c (amd64_linux_write_pc): Likewise. * ia64-linux-tdep.c (ia64_linux_write_pc): Likewise. * ia64-tdep.c (ia64_write_pc): Likewise. * ia64-tdep.h (ia64_write_pc): Likewise. * m32r-tdep.c (m32r_write_pc): Likewise. * m88k-tdep.c (m88k_write_pc): Likewise. * mep-tdep.c (mep_write_pc): Likewise. * mips-tdep.c (mips_write_pc): Likewise. * mips-linux-tdep.c (mips_linux_write_pc): Likewise. * mn10300-tdep.c (mn10300_write_pc): Likewise. * sparc-tdep.c (sparc_write_pc): Likewise. * spu-tdep.c (spu_write_pc): Likewise. * mips-tdep.c (read_signed_register): Remove. (read_signed_register_pid): Likewise. (mips_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_signed_register_pid.
2007-06-16 06:44:56 +08:00
return gdbarch->read_pc (regcache);
1999-06-15 02:08:47 +08:00
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_read_pc (struct gdbarch *gdbarch,
gdbarch_read_pc_ftype read_pc)
1999-06-15 02:08:47 +08:00
{
gdbarch->read_pc = read_pc;
}
* gdbarch.sh (read_pc): Add REGCACHE argument. Remove PTID argument. (write_pc): Likewise. Remove default implementation, add predicate. * gdbarch.c, gdbarch.h: Regenerate. * regcache.c (read_pc_pid): Use current regcache instead of calling read_register_pid. (write_pc_pid): Check gdbarch_write_pc predicate, implement default case inline. (generic_target_write_pc): Remove. * inferior.h (generic_target_write_pc): Remove. * frv-tdep.c (frv_gdbarch_init): Do not install it. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * avr-tdep.c (avr_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_register_pid. * hppa-hpux-tdep.c (hppa_hpux_read_pc): Likewise. * hppa-tdep.c (hppa_read_pc): Likewise. * hppa-tdep.h (hppa_read_pc): Likewise. * ia64-tdep.c (ia64_read_pc): Likewise. * m32r-tdep.c (m32r_read_pc): Likewise. * mep-tdep.c (mep_read_pc): Likewise. * mn10300-tdep.c (mn10300_read_pc): Likewise. * spu-tdep.c (spu_read_pc): Likewise. * arm-tdep.c (arm_write_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling write_register_pid. * avr-tdep.c (avr_write_pc): Likewise. * hppa-hpux-tdep.c (hppa_hpux_write_pc): Likewise. * hppa-tdep.c (hppa_write_pc): Likewise. * hppa-tdep.h (hppa_write_pc): Likewise. * i386-linux-tdep.c (i386_linux_write_pc): Likewise. * amd64-linux-tdep.c (amd64_linux_write_pc): Likewise. * ia64-linux-tdep.c (ia64_linux_write_pc): Likewise. * ia64-tdep.c (ia64_write_pc): Likewise. * ia64-tdep.h (ia64_write_pc): Likewise. * m32r-tdep.c (m32r_write_pc): Likewise. * m88k-tdep.c (m88k_write_pc): Likewise. * mep-tdep.c (mep_write_pc): Likewise. * mips-tdep.c (mips_write_pc): Likewise. * mips-linux-tdep.c (mips_linux_write_pc): Likewise. * mn10300-tdep.c (mn10300_write_pc): Likewise. * sparc-tdep.c (sparc_write_pc): Likewise. * spu-tdep.c (spu_write_pc): Likewise. * mips-tdep.c (read_signed_register): Remove. (read_signed_register_pid): Likewise. (mips_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_signed_register_pid.
2007-06-16 06:44:56 +08:00
int
gdbarch_write_pc_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->write_pc != NULL;
}
1999-06-15 02:08:47 +08:00
void
* gdbarch.sh (read_pc): Add REGCACHE argument. Remove PTID argument. (write_pc): Likewise. Remove default implementation, add predicate. * gdbarch.c, gdbarch.h: Regenerate. * regcache.c (read_pc_pid): Use current regcache instead of calling read_register_pid. (write_pc_pid): Check gdbarch_write_pc predicate, implement default case inline. (generic_target_write_pc): Remove. * inferior.h (generic_target_write_pc): Remove. * frv-tdep.c (frv_gdbarch_init): Do not install it. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * avr-tdep.c (avr_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_register_pid. * hppa-hpux-tdep.c (hppa_hpux_read_pc): Likewise. * hppa-tdep.c (hppa_read_pc): Likewise. * hppa-tdep.h (hppa_read_pc): Likewise. * ia64-tdep.c (ia64_read_pc): Likewise. * m32r-tdep.c (m32r_read_pc): Likewise. * mep-tdep.c (mep_read_pc): Likewise. * mn10300-tdep.c (mn10300_read_pc): Likewise. * spu-tdep.c (spu_read_pc): Likewise. * arm-tdep.c (arm_write_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling write_register_pid. * avr-tdep.c (avr_write_pc): Likewise. * hppa-hpux-tdep.c (hppa_hpux_write_pc): Likewise. * hppa-tdep.c (hppa_write_pc): Likewise. * hppa-tdep.h (hppa_write_pc): Likewise. * i386-linux-tdep.c (i386_linux_write_pc): Likewise. * amd64-linux-tdep.c (amd64_linux_write_pc): Likewise. * ia64-linux-tdep.c (ia64_linux_write_pc): Likewise. * ia64-tdep.c (ia64_write_pc): Likewise. * ia64-tdep.h (ia64_write_pc): Likewise. * m32r-tdep.c (m32r_write_pc): Likewise. * m88k-tdep.c (m88k_write_pc): Likewise. * mep-tdep.c (mep_write_pc): Likewise. * mips-tdep.c (mips_write_pc): Likewise. * mips-linux-tdep.c (mips_linux_write_pc): Likewise. * mn10300-tdep.c (mn10300_write_pc): Likewise. * sparc-tdep.c (sparc_write_pc): Likewise. * spu-tdep.c (spu_write_pc): Likewise. * mips-tdep.c (read_signed_register): Remove. (read_signed_register_pid): Likewise. (mips_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_signed_register_pid.
2007-06-16 06:44:56 +08:00
gdbarch_write_pc (struct gdbarch *gdbarch, struct regcache *regcache, CORE_ADDR val)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->write_pc != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_write_pc called\n");
* gdbarch.sh (read_pc): Add REGCACHE argument. Remove PTID argument. (write_pc): Likewise. Remove default implementation, add predicate. * gdbarch.c, gdbarch.h: Regenerate. * regcache.c (read_pc_pid): Use current regcache instead of calling read_register_pid. (write_pc_pid): Check gdbarch_write_pc predicate, implement default case inline. (generic_target_write_pc): Remove. * inferior.h (generic_target_write_pc): Remove. * frv-tdep.c (frv_gdbarch_init): Do not install it. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * avr-tdep.c (avr_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_register_pid. * hppa-hpux-tdep.c (hppa_hpux_read_pc): Likewise. * hppa-tdep.c (hppa_read_pc): Likewise. * hppa-tdep.h (hppa_read_pc): Likewise. * ia64-tdep.c (ia64_read_pc): Likewise. * m32r-tdep.c (m32r_read_pc): Likewise. * mep-tdep.c (mep_read_pc): Likewise. * mn10300-tdep.c (mn10300_read_pc): Likewise. * spu-tdep.c (spu_read_pc): Likewise. * arm-tdep.c (arm_write_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling write_register_pid. * avr-tdep.c (avr_write_pc): Likewise. * hppa-hpux-tdep.c (hppa_hpux_write_pc): Likewise. * hppa-tdep.c (hppa_write_pc): Likewise. * hppa-tdep.h (hppa_write_pc): Likewise. * i386-linux-tdep.c (i386_linux_write_pc): Likewise. * amd64-linux-tdep.c (amd64_linux_write_pc): Likewise. * ia64-linux-tdep.c (ia64_linux_write_pc): Likewise. * ia64-tdep.c (ia64_write_pc): Likewise. * ia64-tdep.h (ia64_write_pc): Likewise. * m32r-tdep.c (m32r_write_pc): Likewise. * m88k-tdep.c (m88k_write_pc): Likewise. * mep-tdep.c (mep_write_pc): Likewise. * mips-tdep.c (mips_write_pc): Likewise. * mips-linux-tdep.c (mips_linux_write_pc): Likewise. * mn10300-tdep.c (mn10300_write_pc): Likewise. * sparc-tdep.c (sparc_write_pc): Likewise. * spu-tdep.c (spu_write_pc): Likewise. * mips-tdep.c (read_signed_register): Remove. (read_signed_register_pid): Likewise. (mips_read_pc): Add REGCACHE argument. Remove PTID argument. Use REGCACHE instead of calling read_signed_register_pid.
2007-06-16 06:44:56 +08:00
gdbarch->write_pc (regcache, val);
1999-06-15 02:08:47 +08:00
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_write_pc (struct gdbarch *gdbarch,
gdbarch_write_pc_ftype write_pc)
1999-06-15 02:08:47 +08:00
{
gdbarch->write_pc = write_pc;
}
void
gdbarch_virtual_frame_pointer (struct gdbarch *gdbarch, CORE_ADDR pc, int *frame_regnum, LONGEST *frame_offset)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->virtual_frame_pointer != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_virtual_frame_pointer called\n");
gdbarch->virtual_frame_pointer (gdbarch, pc, frame_regnum, frame_offset);
}
void
set_gdbarch_virtual_frame_pointer (struct gdbarch *gdbarch,
gdbarch_virtual_frame_pointer_ftype virtual_frame_pointer)
{
gdbarch->virtual_frame_pointer = virtual_frame_pointer;
}
int
gdbarch_pseudo_register_read_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->pseudo_register_read != NULL;
}
gdb/ * regcache.h (regcache_raw_read, regcache_raw_read_signed) (regcache_raw_read_unsigned, regcache_raw_read_signed) (regcache_raw_read_unsigned, regcache_raw_read_part) (regcache_cooked_read, regcache_cooked_read_signed) (regcache_cooked_read_unsigned, regcache_cooked_read_part) (regcache_cooked_read_ftype): Change return to enum register_status. * regcache.c: Include exceptions.h (regcache_save): Adjust to handle REG_UNAVAILABLE registers. (do_cooked_read): Change return to enum register_status. Always forward to regcache_cooked_read. (regcache_raw_read): Change return to enum register_status. If the register is not REG_VALID, memset the buffer. Return the register's status. (regcache_raw_read_signed): Handle non-REG_VALID registers and return the register's status. (regcache_raw_read_unsigned): Ditto. (regcache_cooked_read): Change return to enum register_status. Assert that with read-only regcaches, the register's status must be known. If the regcache is read-only, and the register is not REG_VALID, memset the buffer. Return the register's status. (regcache_cooked_read_signed): Change return to enum register_status. Handle non-REG_VALID registers and return the register's status. (regcache_cooked_read_unsigned): Change return to enum register_status. Handle non-REG_VALID registers and return the register's status. (regcache_xfer_part, regcache_raw_read_part) (regcache_cooked_read_part): Change return to enum register_status. Return the register's status. (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is unavailable. (regcache_dump): Handle unavailable cooked registers. * frame.c (do_frame_register_read): Adjust interface to match regcache_cooked_read_ftype. * gdbarch.sh (pseudo_register_read): Change return to enum register_status. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.h (i386_pseudo_register_read): Change return to enum register_status. * i386-tdep.c (i386_pseudo_register_read): Change return to enum register_status. If reading a raw register indicates the raw register is not valid, return the raw register's status, otherwise, return REG_VALID. * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum register_status. Handle non-REG_VALID raw registers and return the register's status. * arm-tdep.c (arm_neon_quad_read) (arm_pseudo_read): Change return to enum register_status. Handle non-REG_VALID raw registers and return the register's status. * avr-tdep.c (avr_pseudo_register_read): Ditto. * frv-tdep.c (frv_pseudo_register_read): Ditto. * h8300-tdep.c (h8300_pseudo_register_read): Ditto. * hppa-tdep.c (hppa_pseudo_register_read): Ditto. * m32c-tdep.c (m32c_move_reg_t): Change return to enum register_status. (m32c_raw_read, m32c_raw_write, m32c_banked_read) (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read) (m32c_part_write, m32c_cat_read, m32c_cat_write) (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write) (m32c_pseudo_register_read): Change return to enum register_status. Adjust. * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to enum register_status. Return the register's status. * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum register_status. Return the register's status. (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto. * mips-tdep.c (mips_pseudo_register_read): Ditto. * mt-tdep.c (mt_pseudo_register_read): Ditto. * rs6000-tdep.c (move_ev_register_func): New typedef. (e500_move_ev_register): Use it. Change return to enum register_status. Return the register's status. (do_regcache_raw_read): New function. (do_regcache_raw_write): New function. (e500_pseudo_register_read): Change return to enum register_status. Return the register's status. Use do_regcache_raw_read. (e500_pseudo_register_write): Adjust. Use do_regcache_raw_write. (dfp_pseudo_register_read): Change return to enum register_status. Return the register's status. (vsx_pseudo_register_read): Ditto. (efpr_pseudo_register_read): Ditto. (rs6000_pseudo_register_read): Ditto. * s390-tdep.c (s390_pseudo_register_read): Change return to enum register_status. Return the register's status. * sh64-tdep.c (pseudo_register_read_portions): New function. (sh64_pseudo_register_read): Change return to enum register_status. Use pseudo_register_read_portions. Return the register's status. * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum register_status. Return the register's status. * sh-tdep.c (pseudo_register_read_portions): New function. (sh_pseudo_register_read): Change return to enum register_status. Use pseudo_register_read_portions. Return the register's status. * sparc-tdep.c (sparc32_pseudo_register_read): Change return to enum register_status. Return the register's status. * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto. * spu-tdep.c (spu_pseudo_register_read_spu) (spu_pseudo_register_read): Ditto. * xtensa-tdep.c (xtensa_register_read_masked) (xtensa_pseudo_register_read): Ditto. * bfin-tdep.c (bfin_pseudo_register_read): Ditto.
2011-03-19 02:38:44 +08:00
enum register_status
class readable_regcache and pass readable_regcache to gdbarch pseudo_register_read and pseudo_register_read_value pseudo registers are either from raw registers or memory, so gdbarch methods pseudo_register_read and pseudo_register_read_value should have regcache object which only have read methods. In other words, we should disallow writing to regcache in these two gdbarch methods. In order to apply this restriction, this patch adds a new class readable_regcache, derived from reg_buffer, and it only has raw_read and cooked_read methods. regcache is derived from readable_regcache. This patch also passes readable_regcache instead of regcache to gdbarch methods pseudo_register_read and pseudo_register_read_value. This patch moves raw_read* and cooked_read* methods to readable_regcache, which is straightforward. One thing not straightforward is that I split regcache::xfer_part to readable_regcache::read_part and regcache::write_part, because readable_regcache can only have methods to read. readable_regcache is an abstract base class, and it has a pure virtual function raw_update, because I don't want readable_regcache know where these raw registers are from. They can be from either the target (readwrite regcache) or the regcache itself (readonly regcache). gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_pseudo_register_read_value): Change parameter type to 'readable_regcache *'. * amd64-tdep.c (amd64_pseudo_register_read_value): Likewise. * arm-tdep.c (arm_neon_quad_read): Likewise. (arm_pseudo_read): Likewise. * avr-tdep.c (avr_pseudo_register_read): Likewise. * bfin-tdep.c (bfin_pseudo_register_read): Likewise. * frv-tdep.c (frv_pseudo_register_read): Likewise. * gdbarch.c: Re-generated. * gdbarch.h: Re-generated. * gdbarch.sh (pseudo_register_read): Change parameter type to 'readable_regcache *'. (pseudo_register_read_value): Likewise. * h8300-tdep.c (pseudo_from_raw_register): Likewise. (h8300_pseudo_register_read): Likewise. * hppa-tdep.c (hppa_pseudo_register_read): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_pseudo_register_read_into_value): Likewise. (i386_pseudo_register_read_value): Likewise. * i386-tdep.h (i386_pseudo_register_read_into_value): Update declaration. * ia64-tdep.c (ia64_pseudo_register_read): Likewise. * m32c-tdep.c (m32c_raw_read): Likewise. (m32c_read_flg): Likewise. (m32c_banked_register): Likewise. (m32c_banked_read): Likewise. (m32c_sb_read): Likewise. (m32c_part_read): Likewise. (m32c_cat_read): Likewise. (m32c_r3r2r1r0_read): Likewise. (m32c_pseudo_register_read): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise. * mep-tdep.c (mep_pseudo_cr32_read): Likewise. (mep_pseudo_cr64_read): Likewise. (mep_pseudo_register_read): Likewise. * mips-tdep.c (mips_pseudo_register_read): Likewise. * msp430-tdep.c (msp430_pseudo_register_read): Likewise. * nds32-tdep.c (nds32_pseudo_register_read): Likewise. * regcache.c (regcache::raw_read): Move it to readable_regcache. (regcache::cooked_read): Likewise. (regcache::cooked_read_value): Likewise. (regcache_cooked_read_signed): (regcache::cooked_read): Likewise. * regcache.h (readable_regcache): New class. (regcache): Inherit readable_regcache. Move some methods to readable_regcache. * rl78-tdep.c (rl78_pseudo_register_read): Change parameter type to 'readable_regcache *'. * rs6000-tdep.c (do_regcache_raw_read): Remove. (e500_pseudo_register_read): Change parameter type to 'readable_regcache *'. (dfp_pseudo_register_read): Likewise. (vsx_pseudo_register_read): Likewise. (efpr_pseudo_register_read): Likewise. * s390-tdep.c (s390_pseudo_register_read): Likewise. * sh-tdep.c (sh_pseudo_register_read): Likewise. * sh64-tdep.c (pseudo_register_read_portions): Likewise. (sh64_pseudo_register_read): Likewise. * sparc-tdep.c (sparc32_pseudo_register_read): Likewise. * sparc64-tdep.c (sparc64_pseudo_register_read): Likewise. * spu-tdep.c (spu_pseudo_register_read_spu): Likewise. (spu_pseudo_register_read): Likewise. * xtensa-tdep.c (xtensa_register_read_masked): Likewise. (xtensa_pseudo_register_read): Likewise.
2018-02-21 19:20:03 +08:00
gdbarch_pseudo_register_read (struct gdbarch *gdbarch, readable_regcache *regcache, int cookednum, gdb_byte *buf)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->pseudo_register_read != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_pseudo_register_read called\n");
gdb/ * regcache.h (regcache_raw_read, regcache_raw_read_signed) (regcache_raw_read_unsigned, regcache_raw_read_signed) (regcache_raw_read_unsigned, regcache_raw_read_part) (regcache_cooked_read, regcache_cooked_read_signed) (regcache_cooked_read_unsigned, regcache_cooked_read_part) (regcache_cooked_read_ftype): Change return to enum register_status. * regcache.c: Include exceptions.h (regcache_save): Adjust to handle REG_UNAVAILABLE registers. (do_cooked_read): Change return to enum register_status. Always forward to regcache_cooked_read. (regcache_raw_read): Change return to enum register_status. If the register is not REG_VALID, memset the buffer. Return the register's status. (regcache_raw_read_signed): Handle non-REG_VALID registers and return the register's status. (regcache_raw_read_unsigned): Ditto. (regcache_cooked_read): Change return to enum register_status. Assert that with read-only regcaches, the register's status must be known. If the regcache is read-only, and the register is not REG_VALID, memset the buffer. Return the register's status. (regcache_cooked_read_signed): Change return to enum register_status. Handle non-REG_VALID registers and return the register's status. (regcache_cooked_read_unsigned): Change return to enum register_status. Handle non-REG_VALID registers and return the register's status. (regcache_xfer_part, regcache_raw_read_part) (regcache_cooked_read_part): Change return to enum register_status. Return the register's status. (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is unavailable. (regcache_dump): Handle unavailable cooked registers. * frame.c (do_frame_register_read): Adjust interface to match regcache_cooked_read_ftype. * gdbarch.sh (pseudo_register_read): Change return to enum register_status. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.h (i386_pseudo_register_read): Change return to enum register_status. * i386-tdep.c (i386_pseudo_register_read): Change return to enum register_status. If reading a raw register indicates the raw register is not valid, return the raw register's status, otherwise, return REG_VALID. * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum register_status. Handle non-REG_VALID raw registers and return the register's status. * arm-tdep.c (arm_neon_quad_read) (arm_pseudo_read): Change return to enum register_status. Handle non-REG_VALID raw registers and return the register's status. * avr-tdep.c (avr_pseudo_register_read): Ditto. * frv-tdep.c (frv_pseudo_register_read): Ditto. * h8300-tdep.c (h8300_pseudo_register_read): Ditto. * hppa-tdep.c (hppa_pseudo_register_read): Ditto. * m32c-tdep.c (m32c_move_reg_t): Change return to enum register_status. (m32c_raw_read, m32c_raw_write, m32c_banked_read) (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read) (m32c_part_write, m32c_cat_read, m32c_cat_write) (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write) (m32c_pseudo_register_read): Change return to enum register_status. Adjust. * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to enum register_status. Return the register's status. * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum register_status. Return the register's status. (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto. * mips-tdep.c (mips_pseudo_register_read): Ditto. * mt-tdep.c (mt_pseudo_register_read): Ditto. * rs6000-tdep.c (move_ev_register_func): New typedef. (e500_move_ev_register): Use it. Change return to enum register_status. Return the register's status. (do_regcache_raw_read): New function. (do_regcache_raw_write): New function. (e500_pseudo_register_read): Change return to enum register_status. Return the register's status. Use do_regcache_raw_read. (e500_pseudo_register_write): Adjust. Use do_regcache_raw_write. (dfp_pseudo_register_read): Change return to enum register_status. Return the register's status. (vsx_pseudo_register_read): Ditto. (efpr_pseudo_register_read): Ditto. (rs6000_pseudo_register_read): Ditto. * s390-tdep.c (s390_pseudo_register_read): Change return to enum register_status. Return the register's status. * sh64-tdep.c (pseudo_register_read_portions): New function. (sh64_pseudo_register_read): Change return to enum register_status. Use pseudo_register_read_portions. Return the register's status. * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum register_status. Return the register's status. * sh-tdep.c (pseudo_register_read_portions): New function. (sh_pseudo_register_read): Change return to enum register_status. Use pseudo_register_read_portions. Return the register's status. * sparc-tdep.c (sparc32_pseudo_register_read): Change return to enum register_status. Return the register's status. * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto. * spu-tdep.c (spu_pseudo_register_read_spu) (spu_pseudo_register_read): Ditto. * xtensa-tdep.c (xtensa_register_read_masked) (xtensa_pseudo_register_read): Ditto. * bfin-tdep.c (bfin_pseudo_register_read): Ditto.
2011-03-19 02:38:44 +08:00
return gdbarch->pseudo_register_read (gdbarch, regcache, cookednum, buf);
}
void
set_gdbarch_pseudo_register_read (struct gdbarch *gdbarch,
gdbarch_pseudo_register_read_ftype pseudo_register_read)
{
gdbarch->pseudo_register_read = pseudo_register_read;
}
int
gdbarch_pseudo_register_read_value_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->pseudo_register_read_value != NULL;
}
struct value *
class readable_regcache and pass readable_regcache to gdbarch pseudo_register_read and pseudo_register_read_value pseudo registers are either from raw registers or memory, so gdbarch methods pseudo_register_read and pseudo_register_read_value should have regcache object which only have read methods. In other words, we should disallow writing to regcache in these two gdbarch methods. In order to apply this restriction, this patch adds a new class readable_regcache, derived from reg_buffer, and it only has raw_read and cooked_read methods. regcache is derived from readable_regcache. This patch also passes readable_regcache instead of regcache to gdbarch methods pseudo_register_read and pseudo_register_read_value. This patch moves raw_read* and cooked_read* methods to readable_regcache, which is straightforward. One thing not straightforward is that I split regcache::xfer_part to readable_regcache::read_part and regcache::write_part, because readable_regcache can only have methods to read. readable_regcache is an abstract base class, and it has a pure virtual function raw_update, because I don't want readable_regcache know where these raw registers are from. They can be from either the target (readwrite regcache) or the regcache itself (readonly regcache). gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_pseudo_register_read_value): Change parameter type to 'readable_regcache *'. * amd64-tdep.c (amd64_pseudo_register_read_value): Likewise. * arm-tdep.c (arm_neon_quad_read): Likewise. (arm_pseudo_read): Likewise. * avr-tdep.c (avr_pseudo_register_read): Likewise. * bfin-tdep.c (bfin_pseudo_register_read): Likewise. * frv-tdep.c (frv_pseudo_register_read): Likewise. * gdbarch.c: Re-generated. * gdbarch.h: Re-generated. * gdbarch.sh (pseudo_register_read): Change parameter type to 'readable_regcache *'. (pseudo_register_read_value): Likewise. * h8300-tdep.c (pseudo_from_raw_register): Likewise. (h8300_pseudo_register_read): Likewise. * hppa-tdep.c (hppa_pseudo_register_read): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_pseudo_register_read_into_value): Likewise. (i386_pseudo_register_read_value): Likewise. * i386-tdep.h (i386_pseudo_register_read_into_value): Update declaration. * ia64-tdep.c (ia64_pseudo_register_read): Likewise. * m32c-tdep.c (m32c_raw_read): Likewise. (m32c_read_flg): Likewise. (m32c_banked_register): Likewise. (m32c_banked_read): Likewise. (m32c_sb_read): Likewise. (m32c_part_read): Likewise. (m32c_cat_read): Likewise. (m32c_r3r2r1r0_read): Likewise. (m32c_pseudo_register_read): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise. * mep-tdep.c (mep_pseudo_cr32_read): Likewise. (mep_pseudo_cr64_read): Likewise. (mep_pseudo_register_read): Likewise. * mips-tdep.c (mips_pseudo_register_read): Likewise. * msp430-tdep.c (msp430_pseudo_register_read): Likewise. * nds32-tdep.c (nds32_pseudo_register_read): Likewise. * regcache.c (regcache::raw_read): Move it to readable_regcache. (regcache::cooked_read): Likewise. (regcache::cooked_read_value): Likewise. (regcache_cooked_read_signed): (regcache::cooked_read): Likewise. * regcache.h (readable_regcache): New class. (regcache): Inherit readable_regcache. Move some methods to readable_regcache. * rl78-tdep.c (rl78_pseudo_register_read): Change parameter type to 'readable_regcache *'. * rs6000-tdep.c (do_regcache_raw_read): Remove. (e500_pseudo_register_read): Change parameter type to 'readable_regcache *'. (dfp_pseudo_register_read): Likewise. (vsx_pseudo_register_read): Likewise. (efpr_pseudo_register_read): Likewise. * s390-tdep.c (s390_pseudo_register_read): Likewise. * sh-tdep.c (sh_pseudo_register_read): Likewise. * sh64-tdep.c (pseudo_register_read_portions): Likewise. (sh64_pseudo_register_read): Likewise. * sparc-tdep.c (sparc32_pseudo_register_read): Likewise. * sparc64-tdep.c (sparc64_pseudo_register_read): Likewise. * spu-tdep.c (spu_pseudo_register_read_spu): Likewise. (spu_pseudo_register_read): Likewise. * xtensa-tdep.c (xtensa_register_read_masked): Likewise. (xtensa_pseudo_register_read): Likewise.
2018-02-21 19:20:03 +08:00
gdbarch_pseudo_register_read_value (struct gdbarch *gdbarch, readable_regcache *regcache, int cookednum)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->pseudo_register_read_value != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_pseudo_register_read_value called\n");
return gdbarch->pseudo_register_read_value (gdbarch, regcache, cookednum);
}
void
set_gdbarch_pseudo_register_read_value (struct gdbarch *gdbarch,
gdbarch_pseudo_register_read_value_ftype pseudo_register_read_value)
{
gdbarch->pseudo_register_read_value = pseudo_register_read_value;
}
int
gdbarch_pseudo_register_write_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->pseudo_register_write != NULL;
}
void
gdbarch_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache, int cookednum, const gdb_byte *buf)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->pseudo_register_write != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_pseudo_register_write called\n");
gdbarch->pseudo_register_write (gdbarch, regcache, cookednum, buf);
}
void
set_gdbarch_pseudo_register_write (struct gdbarch *gdbarch,
gdbarch_pseudo_register_write_ftype pseudo_register_write)
{
gdbarch->pseudo_register_write = pseudo_register_write;
}
1999-06-15 02:08:47 +08:00
int
1999-08-31 09:14:27 +08:00
gdbarch_num_regs (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
/* Check variable changed from pre-default. */
gdb_assert (gdbarch->num_regs != -1);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_num_regs called\n");
return gdbarch->num_regs;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_num_regs (struct gdbarch *gdbarch,
int num_regs)
1999-06-15 02:08:47 +08:00
{
gdbarch->num_regs = num_regs;
}
int
gdbarch_num_pseudo_regs (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of num_pseudo_regs, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_num_pseudo_regs called\n");
return gdbarch->num_pseudo_regs;
}
void
set_gdbarch_num_pseudo_regs (struct gdbarch *gdbarch,
int num_pseudo_regs)
{
gdbarch->num_pseudo_regs = num_pseudo_regs;
}
int
gdbarch_ax_pseudo_register_collect_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->ax_pseudo_register_collect != NULL;
}
int
gdbarch_ax_pseudo_register_collect (struct gdbarch *gdbarch, struct agent_expr *ax, int reg)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->ax_pseudo_register_collect != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_ax_pseudo_register_collect called\n");
return gdbarch->ax_pseudo_register_collect (gdbarch, ax, reg);
}
void
set_gdbarch_ax_pseudo_register_collect (struct gdbarch *gdbarch,
gdbarch_ax_pseudo_register_collect_ftype ax_pseudo_register_collect)
{
gdbarch->ax_pseudo_register_collect = ax_pseudo_register_collect;
}
int
gdbarch_ax_pseudo_register_push_stack_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->ax_pseudo_register_push_stack != NULL;
}
int
gdbarch_ax_pseudo_register_push_stack (struct gdbarch *gdbarch, struct agent_expr *ax, int reg)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->ax_pseudo_register_push_stack != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_ax_pseudo_register_push_stack called\n");
return gdbarch->ax_pseudo_register_push_stack (gdbarch, ax, reg);
}
void
set_gdbarch_ax_pseudo_register_push_stack (struct gdbarch *gdbarch,
gdbarch_ax_pseudo_register_push_stack_ftype ax_pseudo_register_push_stack)
{
gdbarch->ax_pseudo_register_push_stack = ax_pseudo_register_push_stack;
}
Intel MPX bound violation handling With Intel Memory Protection Extensions it was introduced the concept of boundary violation. A boundary violations is presented to the inferior as a segmentation fault having SIGCODE 3. This patch adds a handler for a boundary violation extending the information displayed when a bound violation is presented to the inferior. In the stop mode case the debugger will also display the kind of violation: "upper" or "lower", bounds and the address accessed. On no stop mode the information will still remain unchanged. Additional information about bound violations are not meaningful in that case user does not know the line in which violation occurred as well. When the segmentation fault handler is stop mode the out puts will be changed as exemplified below. The usual output of a segfault is: Program received signal SIGSEGV, Segmentation fault 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In case it is a bound violation it will be presented as: Program received signal SIGSEGV, Segmentation fault Upper bound violation while accessing address 0x7fffffffc3b3 Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3] 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In mi mode the output of a segfault is: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c", func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"} ,{name="b",value="0x603050"}, {name="c",value="0x603070"}, {name="d",value="0x603090"},{name="len",value="7"}], file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"}, thread-id="1",stopped-threads="all",core="6" in the case of a bound violation: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", sigcode-meaning="Upper bound violation", lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f", frame={addr="0x0000000000400d7c",func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"}, {name="c",value="0x603070"},{name="d",value="0x603090"}, {name="len",value="7"}],file="i386-mpx-sigsegv.c", fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1", stopped-threads="all",core="6" 2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com> gdb/ChangeLog: * NEWS: Add entry for bound violation. * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add handler for segmentation fault. * gdbarch.sh (handle_segmentation_fault): New. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New. (SIG_CODE_BONDARY_FAULT): New define. (i386_linux_init_abi): Use i386_mpx_bound_violation_handler. * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New. * i386-tdep.c (i386_mpx_enabled): Add as external. * i386-tdep.c (i386_mpx_enabled): Add as external. * infrun.c (handle_segmentation_fault): New function. (print_signal_received_reason): Use handle_segmentation_fault. gdb/testsuite/ChangeLog: * gdb.arch/i386-mpx-sigsegv.c: New file. * gdb.arch/i386-mpx-sigsegv.exp: New file. * gdb.arch/i386-mpx-simple_segv.c: New file. * gdb.arch/i386-mpx-simple_segv.exp: New file. gdb/doc/ChangeLog: * gdb.texinfo (Signals): Add bound violation display hints for a SIGSEGV.
2016-02-19 00:24:59 +08:00
int
gdbarch_handle_segmentation_fault_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->handle_segmentation_fault != NULL;
}
void
gdbarch_handle_segmentation_fault (struct gdbarch *gdbarch, struct ui_out *uiout)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->handle_segmentation_fault != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_handle_segmentation_fault called\n");
gdbarch->handle_segmentation_fault (gdbarch, uiout);
}
void
set_gdbarch_handle_segmentation_fault (struct gdbarch *gdbarch,
gdbarch_handle_segmentation_fault_ftype handle_segmentation_fault)
{
gdbarch->handle_segmentation_fault = handle_segmentation_fault;
}
1999-06-15 02:08:47 +08:00
int
1999-08-31 09:14:27 +08:00
gdbarch_sp_regnum (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
/* Skip verify of sp_regnum, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_sp_regnum called\n");
return gdbarch->sp_regnum;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_sp_regnum (struct gdbarch *gdbarch,
int sp_regnum)
1999-06-15 02:08:47 +08:00
{
gdbarch->sp_regnum = sp_regnum;
}
int
1999-08-31 09:14:27 +08:00
gdbarch_pc_regnum (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
/* Skip verify of pc_regnum, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_pc_regnum called\n");
return gdbarch->pc_regnum;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_pc_regnum (struct gdbarch *gdbarch,
int pc_regnum)
1999-06-15 02:08:47 +08:00
{
gdbarch->pc_regnum = pc_regnum;
}
int
gdbarch_ps_regnum (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of ps_regnum, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_ps_regnum called\n");
return gdbarch->ps_regnum;
}
void
set_gdbarch_ps_regnum (struct gdbarch *gdbarch,
int ps_regnum)
{
gdbarch->ps_regnum = ps_regnum;
}
int
gdbarch_fp0_regnum (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of fp0_regnum, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_fp0_regnum called\n");
return gdbarch->fp0_regnum;
}
void
set_gdbarch_fp0_regnum (struct gdbarch *gdbarch,
int fp0_regnum)
{
gdbarch->fp0_regnum = fp0_regnum;
}
int
gdbarch_stab_reg_to_regnum (struct gdbarch *gdbarch, int stab_regnr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->stab_reg_to_regnum != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_stab_reg_to_regnum called\n");
return gdbarch->stab_reg_to_regnum (gdbarch, stab_regnr);
}
void
set_gdbarch_stab_reg_to_regnum (struct gdbarch *gdbarch,
gdbarch_stab_reg_to_regnum_ftype stab_reg_to_regnum)
{
gdbarch->stab_reg_to_regnum = stab_reg_to_regnum;
}
int
gdbarch_ecoff_reg_to_regnum (struct gdbarch *gdbarch, int ecoff_regnr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->ecoff_reg_to_regnum != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_ecoff_reg_to_regnum called\n");
return gdbarch->ecoff_reg_to_regnum (gdbarch, ecoff_regnr);
}
void
set_gdbarch_ecoff_reg_to_regnum (struct gdbarch *gdbarch,
gdbarch_ecoff_reg_to_regnum_ftype ecoff_reg_to_regnum)
{
gdbarch->ecoff_reg_to_regnum = ecoff_reg_to_regnum;
}
int
gdbarch_sdb_reg_to_regnum (struct gdbarch *gdbarch, int sdb_regnr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->sdb_reg_to_regnum != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_sdb_reg_to_regnum called\n");
return gdbarch->sdb_reg_to_regnum (gdbarch, sdb_regnr);
}
void
set_gdbarch_sdb_reg_to_regnum (struct gdbarch *gdbarch,
gdbarch_sdb_reg_to_regnum_ftype sdb_reg_to_regnum)
{
gdbarch->sdb_reg_to_regnum = sdb_reg_to_regnum;
}
int
gdbarch_dwarf2_reg_to_regnum (struct gdbarch *gdbarch, int dwarf2_regnr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->dwarf2_reg_to_regnum != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_dwarf2_reg_to_regnum called\n");
return gdbarch->dwarf2_reg_to_regnum (gdbarch, dwarf2_regnr);
}
void
set_gdbarch_dwarf2_reg_to_regnum (struct gdbarch *gdbarch,
gdbarch_dwarf2_reg_to_regnum_ftype dwarf2_reg_to_regnum)
{
gdbarch->dwarf2_reg_to_regnum = dwarf2_reg_to_regnum;
}
2002-06-18 07:32:36 +08:00
const char *
1999-06-15 02:08:47 +08:00
gdbarch_register_name (struct gdbarch *gdbarch, int regnr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->register_name != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_register_name called\n");
2007-11-02 Markus Deuling <deuling@de.ibm.com> * gdbarch.sh (register_name): Add gdbarch parameter. * gdbarch.{c,h}: Regenerate. * target-descriptions.c (tdesc_register_name): Add gdbarch parameter. (tdesc_register_name): Replace current_gdbarch by gdbarch. * target-descriptions.h (tdesc_register_name): Add gdbarch parameter. * xstormy16-tdep.c (xstormy16_register_name): Add gdbarch parameter. * vax-tdep.c (vax_register_name): Add gdbarch parameter. * spu-tdep.c (spu_register_name): Add gdbarch parameter. * s390-tdep.c (s390_register_name): Add gdbarch parameter. * mt-tdep.c (mt_register_name): Add gdbarch parameter. (mt_registers_info): Replace current_gdbarch by gdbarch. (mt_register_reggroup_p): Add gdbarch to mt_register_name call. * mips-tdep.c (mips_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (mips_register_name): Add gdbarch to tdesc_register_name call. * mep-tdep.c (mep_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (mep_register_reggroup_p): Add gdbarch to mep_register_name call. * m32c-tdep.c (m32c_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. * m88k-tdep.c (m88k_register_name): Add gdbarch parameter. * m68k-tdep.c (m68k_register_name): Add gdbarch parameter. * m32r-tdep.c (m32r_register_name): Add gdbarch parameter. (m32r_frame_unwind_cache): Use get_frame_arch to get at the current architecture by frame_info. * iq2000-tdep.c (iq2000_register_name): Add gdbarch parameter. * ia64-tdep.c (ia64_register_name): Add gdbarch parameter. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Add gdbarch parameter. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Add gdbarch parameter. * cris-tdep.c (cris_register_name, crisv32_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (cris_gdbarch_init): Replace current_gdbarch by gdbarch (comment). * avr-tdep.c (avr_register_name): Add gdbarch parameter. * arm-tdep.c (arm_register_name): Add gdbarch paramete * amd64-tdep.c (amd64_register_name): Add gdbarch parameter. Update caller. * amd64-tdep.h (amd64_register_name): Add gdbarch parameter. * amd64-linux-tdep.c (amd64_linux_register_name): Add gdbarch parameter. * alpha-tdep.c (alpha_register_name): Add gdbarch parameter. (alpha_cannot_fetch_register, alpha_cannot_store_register): Update call of alpha_register_name. * frv-tdep.c (frv_register_name): Add gdbarch parameter. * i386-tdep.c (i386_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (i386_register_type): Replace ?current_gdbarch by gdbarch. * i386-tdep.h (i386_register_name): Add gdbarch parameter. * i386-linux-tdep.c (i386_linux_register_name): Add gdbarch parameter. * m68hc11-tdep.c (m68hc11_register_name): Add gdbarch parameter. (m68hc11_register_reggroup_p): Add gdbarch to call of m68hc11_register_name. * mn10300-tdep.c (mn10300_generic_register_name, am33_register_name) (am33_2_register_name): Add gdbarch parameter. (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current architecture by frame_info. (mn10300_dump_tdep): Replace current_gdbarch by gdbarch. * rs6000-tdep.c (rs6000_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. * score-tdep.c (score_register_name): Add gdbarch parameter. (score_return_value, score_push_dummy_call): Replace current_gdbarch by gdbarch. * sh64-tdep.c (sh64_register_name): Add gdbarch parameter. (sh64_compact_reg_base_num, sh64_register_convert_to_virtual) (sh64_register_convert_to_raw, sh64_fv_reg_base_num) (sh64_dr_reg_base_num, sh64_fpp_reg_base_num): Add gdbarch parameter and update caller. Replace current_gdbarch by gdbarch. (sh64_extract_return_value, sh64_store_return_value): Use get_regcache_arch to get at the current architecture by regcache. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name, sh_sh2a_register_name) (sh_sh2a_nofpu_register_name, sh_sh_dsp_register_name) (sh_sh3_dsp_register_name, sh_sh4_register_name) (sh_sh4_nofpu_register_name, sh_sh4al_dsp_register_name): Add gdbarch parameter. (fv_reg_base_num, dr_reg_base_num, sh_justify_value_in_reg) (sh_next_flt_argreg): Add gdbarch parameter and update caller. Replace current_gdbarch by gdbarch. (sh_extract_return_value_fpu, sh_store_return_value_fpu): Use get_regcache_arch to get at the current architecture by regcache. * sparc-tdep.c (sparc32_register_name): Add gdbarch parameter. * sparc64-tdep.c (sparc64_register_name): Add gdbarch parameter. * v850-tdep.c (v850_register_name, v850e_register_name): Add gdbarch parameter. (v850_unwind_sp, v850_unwind_pc): Replace current_gdbarch by gdbarch. * xtensa-tdep.c (xtensa_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (xtensa_pseudo_register_read, xtensa_pseudo_register_write) (xtensa_frame_prev_register): Add gdbarch parameter to xtensa_register_name call.
2007-11-02 22:27:15 +08:00
return gdbarch->register_name (gdbarch, regnr);
1999-06-15 02:08:47 +08:00
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_register_name (struct gdbarch *gdbarch,
gdbarch_register_name_ftype register_name)
1999-06-15 02:08:47 +08:00
{
gdbarch->register_name = register_name;
}
int
gdbarch_register_type_p (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
return gdbarch->register_type != NULL;
}
struct type *
gdbarch_register_type (struct gdbarch *gdbarch, int reg_nr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->register_type != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_register_type called\n");
return gdbarch->register_type (gdbarch, reg_nr);
1999-06-15 02:08:47 +08:00
}
void
set_gdbarch_register_type (struct gdbarch *gdbarch,
gdbarch_register_type_ftype register_type)
1999-06-15 02:08:47 +08:00
{
gdbarch->register_type = register_type;
1999-06-15 02:08:47 +08:00
}
int
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
gdbarch_dummy_id_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
return gdbarch->dummy_id != NULL;
}
struct frame_id
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
gdbarch_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
{
gdb_assert (gdbarch != NULL);
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
gdb_assert (gdbarch->dummy_id != NULL);
if (gdbarch_debug >= 2)
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
fprintf_unfiltered (gdb_stdlog, "gdbarch_dummy_id called\n");
return gdbarch->dummy_id (gdbarch, this_frame);
}
void
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
set_gdbarch_dummy_id (struct gdbarch *gdbarch,
gdbarch_dummy_id_ftype dummy_id)
{
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-05-01 05:16:46 +08:00
gdbarch->dummy_id = dummy_id;
}
int
gdbarch_deprecated_fp_regnum (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of deprecated_fp_regnum, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_deprecated_fp_regnum called\n");
return gdbarch->deprecated_fp_regnum;
}
void
set_gdbarch_deprecated_fp_regnum (struct gdbarch *gdbarch,
int deprecated_fp_regnum)
{
gdbarch->deprecated_fp_regnum = deprecated_fp_regnum;
}
int
gdbarch_push_dummy_call_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->push_dummy_call != NULL;
}
CORE_ADDR
2004-06-06 Randolph Chung <tausq@debian.org> * gdbarch.sh (PUSH_DUMMY_CALL): Change CORE_ADDR func_addr argument to struct value *function. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * infcall.c (call_function_by_hand): Pass entire function value to push_dummy_call. * Makefile.in (alpha-tdep.o, frv-tdep.o, ia64-tdep.o, mips-tdep.o) (ppc-sysv-tdep.o, rs6000-tdep.o): Update dependencies. * alpha-tdep.c (alpha_push_dummy_call): Update call signature. * amd64-tdep.c (amd64_push_dummy_call): Likewise. * arm-tdep.c (arm_push_dummy_call): Likewise. * avr-tdep.c (avr_push_dummy_call): Likewise. * cris-tdep.c (cris_push_dummy_call): Likewise. * d10v-tdep.c (d10v_push_dummy_call): Likewise. * frv-tdep.c (frv_push_dummy_call): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (hppa32_push_dummy_call) (hppa64_push_dummy_call): Likewise. * i386-tdep.c (i386_push_dummy_call): Likewise. * ia64-tdep.c (ia64_push_dummy_call): Likewise. * m32r-tdep.c (m32r_push_dummy_call): Likewise. * m68hc11-tdep.c (m68hc11_push_dummy_call): Likewise. * m68k-tdep.c (m68k_push_dummy_call): Likewise. * m88k-tdep.c (m88k_push_dummy_call): Likewise. * mips-tdep.c (mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call) (mips_o32_push_dummy_call, mips_o64_push_dummy_call): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call) (ppc64_sysv_abi_push_dummy_call): Likewise. * ppc-tdep.h (ppc_sysv_abi_push_dummy_call) (ppc64_sysv_abi_push_dummy_call): Likewise. * rs6000-tdep.c (rs6000_push_dummy_call): Likewise. * s390-tdep.c (s390_push_dummy_call): Likewise. * sh-tdep.c (sh_push_dummy_call_fpu) (sh_push_dummy_call_nofpu): Likewise. * sparc-tdep.c (sparc32_push_dummy_call): Likewise. * sparc64-tdep.c (sparc64_push_dummy_call): Likewise. * vax-tdep.c (vax_push_dummy_call): Likewise.
2004-06-07 10:02:55 +08:00
gdbarch_push_dummy_call (struct gdbarch *gdbarch, struct value *function, struct regcache *regcache, CORE_ADDR bp_addr, int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->push_dummy_call != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_push_dummy_call called\n");
2004-06-06 Randolph Chung <tausq@debian.org> * gdbarch.sh (PUSH_DUMMY_CALL): Change CORE_ADDR func_addr argument to struct value *function. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * infcall.c (call_function_by_hand): Pass entire function value to push_dummy_call. * Makefile.in (alpha-tdep.o, frv-tdep.o, ia64-tdep.o, mips-tdep.o) (ppc-sysv-tdep.o, rs6000-tdep.o): Update dependencies. * alpha-tdep.c (alpha_push_dummy_call): Update call signature. * amd64-tdep.c (amd64_push_dummy_call): Likewise. * arm-tdep.c (arm_push_dummy_call): Likewise. * avr-tdep.c (avr_push_dummy_call): Likewise. * cris-tdep.c (cris_push_dummy_call): Likewise. * d10v-tdep.c (d10v_push_dummy_call): Likewise. * frv-tdep.c (frv_push_dummy_call): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (hppa32_push_dummy_call) (hppa64_push_dummy_call): Likewise. * i386-tdep.c (i386_push_dummy_call): Likewise. * ia64-tdep.c (ia64_push_dummy_call): Likewise. * m32r-tdep.c (m32r_push_dummy_call): Likewise. * m68hc11-tdep.c (m68hc11_push_dummy_call): Likewise. * m68k-tdep.c (m68k_push_dummy_call): Likewise. * m88k-tdep.c (m88k_push_dummy_call): Likewise. * mips-tdep.c (mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call) (mips_o32_push_dummy_call, mips_o64_push_dummy_call): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call) (ppc64_sysv_abi_push_dummy_call): Likewise. * ppc-tdep.h (ppc_sysv_abi_push_dummy_call) (ppc64_sysv_abi_push_dummy_call): Likewise. * rs6000-tdep.c (rs6000_push_dummy_call): Likewise. * s390-tdep.c (s390_push_dummy_call): Likewise. * sh-tdep.c (sh_push_dummy_call_fpu) (sh_push_dummy_call_nofpu): Likewise. * sparc-tdep.c (sparc32_push_dummy_call): Likewise. * sparc64-tdep.c (sparc64_push_dummy_call): Likewise. * vax-tdep.c (vax_push_dummy_call): Likewise.
2004-06-07 10:02:55 +08:00
return gdbarch->push_dummy_call (gdbarch, function, regcache, bp_addr, nargs, args, sp, struct_return, struct_addr);
}
void
set_gdbarch_push_dummy_call (struct gdbarch *gdbarch,
gdbarch_push_dummy_call_ftype push_dummy_call)
{
gdbarch->push_dummy_call = push_dummy_call;
}
2000-12-15 20:33:08 +08:00
int
gdbarch_call_dummy_location (struct gdbarch *gdbarch)
2000-12-15 20:33:08 +08:00
{
gdb_assert (gdbarch != NULL);
/* Skip verify of call_dummy_location, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_call_dummy_location called\n");
return gdbarch->call_dummy_location;
2000-12-15 20:33:08 +08:00
}
void
set_gdbarch_call_dummy_location (struct gdbarch *gdbarch,
int call_dummy_location)
{
gdbarch->call_dummy_location = call_dummy_location;
}
1999-06-15 02:08:47 +08:00
int
gdbarch_push_dummy_code_p (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
return gdbarch->push_dummy_code != NULL;
}
CORE_ADDR
gdbarch_push_dummy_code (struct gdbarch *gdbarch, CORE_ADDR sp, CORE_ADDR funaddr, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr, struct regcache *regcache)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->push_dummy_code != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_push_dummy_code called\n");
return gdbarch->push_dummy_code (gdbarch, sp, funaddr, args, nargs, value_type, real_pc, bp_addr, regcache);
1999-06-15 02:08:47 +08:00
}
void
set_gdbarch_push_dummy_code (struct gdbarch *gdbarch,
gdbarch_push_dummy_code_ftype push_dummy_code)
1999-06-15 02:08:47 +08:00
{
gdbarch->push_dummy_code = push_dummy_code;
1999-06-15 02:08:47 +08:00
}
Skip unwritable frames in command "finish" Nowadays, GDB can't insert breakpoint on the return address of the exception handler on ARM M-profile, because the address is a magic one 0xfffffff9, (gdb) bt #0 CT32B1_IRQHandler () at ../src/timer.c:67 #1 <signal handler called> #2 main () at ../src/timer.c:127 (gdb) info frame Stack level 0, frame at 0x200ffa8: pc = 0x4ec in CT32B1_IRQHandler (../src/timer.c:67); saved pc = 0xfffffff9 called by frame at 0x200ffc8 source language c. Arglist at 0x200ffa0, args: Locals at 0x200ffa0, Previous frame's sp is 0x200ffa8 Saved registers: r7 at 0x200ffa0, lr at 0x200ffa4 (gdb) x/x 0xfffffff9 0xfffffff9: Cannot access memory at address 0xfffffff9 (gdb) finish Run till exit from #0 CT32B1_IRQHandler () at ../src/timer.c:67 Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 0. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. even some debug probe can't set hardware breakpoint on the magic address too, (gdb) hbreak *0xfffffff9 Hardware assisted breakpoint 2 at 0xfffffff9 (gdb) c Continuing. Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 2. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. The problem described above is quite similar to PR 8841, in which GDB can't set breakpoint on signal trampoline, which is mapped to a read-only page by kernel. The rationale of this patch is to skip "unwritable" frames when looking for caller frames in command "finish", and a new gdbarch method code_of_frame_writable is added. This patch fixes the problem on ARM cortex-m target, but it can be used to fix PR 8841 too. gdb: 2016-05-10 Yao Qi <yao.qi@arm.com> * arch-utils.c (default_code_of_frame_writable): New function. * arch-utils.h (default_code_of_frame_writable): Declare. * arm-tdep.c (arm_code_of_frame_writable): New function. (arm_gdbarch_init): Install gdbarch method code_of_frame_writable if the target is M-profile. * frame.c (skip_unwritable_frames): New function. * frame.h (skip_unwritable_frames): Declare. * gdbarch.sh (code_of_frame_writable): New. * gdbarch.c, gdbarch.h: Re-generated. * infcmd.c (finish_command): Call skip_unwritable_frames.
2016-05-24 00:32:56 +08:00
int
gdbarch_code_of_frame_writable (struct gdbarch *gdbarch, struct frame_info *frame)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->code_of_frame_writable != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_code_of_frame_writable called\n");
return gdbarch->code_of_frame_writable (gdbarch, frame);
}
void
set_gdbarch_code_of_frame_writable (struct gdbarch *gdbarch,
gdbarch_code_of_frame_writable_ftype code_of_frame_writable)
{
gdbarch->code_of_frame_writable = code_of_frame_writable;
}
void
gdbarch_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file, struct frame_info *frame, int regnum, int all)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->print_registers_info != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_print_registers_info called\n");
gdbarch->print_registers_info (gdbarch, file, frame, regnum, all);
}
void
set_gdbarch_print_registers_info (struct gdbarch *gdbarch,
gdbarch_print_registers_info_ftype print_registers_info)
{
gdbarch->print_registers_info = print_registers_info;
1999-06-15 02:08:47 +08:00
}
void
gdbarch_print_float_info (struct gdbarch *gdbarch, struct ui_file *file, struct frame_info *frame, const char *args)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->print_float_info != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_print_float_info called\n");
gdbarch->print_float_info (gdbarch, file, frame, args);
1999-06-15 02:08:47 +08:00
}
void
set_gdbarch_print_float_info (struct gdbarch *gdbarch,
gdbarch_print_float_info_ftype print_float_info)
1999-06-15 02:08:47 +08:00
{
gdbarch->print_float_info = print_float_info;
}
int
gdbarch_print_vector_info_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->print_vector_info != NULL;
}
void
gdbarch_print_vector_info (struct gdbarch *gdbarch, struct ui_file *file, struct frame_info *frame, const char *args)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->print_vector_info != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_print_vector_info called\n");
gdbarch->print_vector_info (gdbarch, file, frame, args);
1999-06-15 02:08:47 +08:00
}
void
set_gdbarch_print_vector_info (struct gdbarch *gdbarch,
gdbarch_print_vector_info_ftype print_vector_info)
{
gdbarch->print_vector_info = print_vector_info;
}
int
gdbarch_register_sim_regno (struct gdbarch *gdbarch, int reg_nr)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->register_sim_regno != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_register_sim_regno called\n");
return gdbarch->register_sim_regno (gdbarch, reg_nr);
1999-06-15 02:08:47 +08:00
}
void
set_gdbarch_register_sim_regno (struct gdbarch *gdbarch,
gdbarch_register_sim_regno_ftype register_sim_regno)
1999-06-15 02:08:47 +08:00
{
gdbarch->register_sim_regno = register_sim_regno;
1999-06-15 02:08:47 +08:00
}
int
gdbarch_cannot_fetch_register (struct gdbarch *gdbarch, int regnum)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->cannot_fetch_register != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_cannot_fetch_register called\n");
return gdbarch->cannot_fetch_register (gdbarch, regnum);
}
void
set_gdbarch_cannot_fetch_register (struct gdbarch *gdbarch,
gdbarch_cannot_fetch_register_ftype cannot_fetch_register)
{
gdbarch->cannot_fetch_register = cannot_fetch_register;
1999-06-15 02:08:47 +08:00
}
int
gdbarch_cannot_store_register (struct gdbarch *gdbarch, int regnum)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->cannot_store_register != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_cannot_store_register called\n");
return gdbarch->cannot_store_register (gdbarch, regnum);
1999-06-15 02:08:47 +08:00
}
void
set_gdbarch_cannot_store_register (struct gdbarch *gdbarch,
gdbarch_cannot_store_register_ftype cannot_store_register)
1999-06-15 02:08:47 +08:00
{
gdbarch->cannot_store_register = cannot_store_register;
1999-06-15 02:08:47 +08:00
}
int
gdbarch_get_longjmp_target_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->get_longjmp_target != NULL;
}
int
gdbarch_get_longjmp_target (struct gdbarch *gdbarch, struct frame_info *frame, CORE_ADDR *pc)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->get_longjmp_target != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_get_longjmp_target called\n");
return gdbarch->get_longjmp_target (frame, pc);
1999-06-15 02:08:47 +08:00
}
void
set_gdbarch_get_longjmp_target (struct gdbarch *gdbarch,
gdbarch_get_longjmp_target_ftype get_longjmp_target)
1999-06-15 02:08:47 +08:00
{
gdbarch->get_longjmp_target = get_longjmp_target;
1999-06-15 02:08:47 +08:00
}
int
1999-08-31 09:14:27 +08:00
gdbarch_believe_pcc_promotion (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_believe_pcc_promotion called\n");
return gdbarch->believe_pcc_promotion;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_believe_pcc_promotion (struct gdbarch *gdbarch,
int believe_pcc_promotion)
1999-06-15 02:08:47 +08:00
{
gdbarch->believe_pcc_promotion = believe_pcc_promotion;
}
int
2003-06-14 Andrew Cagney <cagney@redhat.com> Mark Kettenis <kettenis@gnu.org> * gdbarch.sh (CONVERT_REGISTER_P): Add "type" parameter. (REGISTER_TO_VALUE, VALUE_TO_REGISTER): Replace raw buffer parameter with "frame". * gdbarch.h, gdbarch.c: Re-generate. * frame.h (put_frame_register): Declare. * frame.c (put_frame_register): New function. * arch-utils.c (legacy_convert_register_p): Add "type" parameter. (legacy_register_to_value): Rewrite, use "frame" to get the register value. (legacy_value_to_register): Rewrite, use "frame" to find the register's location before storing. * arch-utils.h (legacy_convert_register_p): Update. (legacy_register_to_value, legacy_value_to_register): Update. * findvar.c (value_from_register): Rewrite, eliminate use of REGISTER_CONVERT_TO_TYPE, pass "type" to CONVERT_REGISTER_P, pass "frame" to REGISTER_TO_VALUE. * valops.c (value_assign): Move the CONVERT_REGISTER code to the lval_reg_frame_relative + lval_register branch of the switch. Do not use REGISTER_CONVERT_FROM_TYPE. Use put_frame_register. * i386-tdep.c (I386_EBX_REGNUM, I386_ECX_REGNUM, I386_ESI_REGNUM, I386_EDI_REGNUM): New defines. (i386_next_regnum, i386_convert_register_p, i386_register_to_value, i386_value_to_register): New functions. (i386_register_convertible, i386_register_convert_to_virtual, i386_convert_to_raw): Remove functions. (i386_gdbarch_init): Set convert_register_p, register_to_value and value_to_register instead of register_convertible, register_convert_to_virtual and register_convert_to_raw. * mips-tdep.c (mips_convert_register_p): New function. (mips_value_to_register): Replace mips_register_convert_from_type. (mips_register_to_value): Replace mips_register_convert_to_type. (mips_gdbarch_init): Set conver_register_p, value_to_register and register_to_value. * alpha-tdep.c (alpha_convert_register_p): Update. (alpha_value_to_register): Update, store the register. (alpha_register_to_value): Update, fetch the register.
2003-06-15 06:35:25 +08:00
gdbarch_convert_register_p (struct gdbarch *gdbarch, int regnum, struct type *type)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->convert_register_p != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_convert_register_p called\n");
return gdbarch->convert_register_p (gdbarch, regnum, type);
}
void
set_gdbarch_convert_register_p (struct gdbarch *gdbarch,
gdbarch_convert_register_p_ftype convert_register_p)
{
gdbarch->convert_register_p = convert_register_p;
}
gdb/ * dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. (write_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out when doing a read-modify write of a bitfield. * findvar.c (value_from_register): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. * frame.c (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. Throw error on bad debug info. Use frame_register instead of frame_register_read, to fill in the new arguments. * frame.h (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. * valops.c: (value_assign): Adjust, and handle get_frame_register_bytes failing. * spu-tdep.c: Include exceptions.h. (spu_software_single_step): Adjust, and handle get_frame_register_bytes failing. (spu_get_longjmp_target): Ditto. * gdbarch.sh (register_to_value): Change to return int. New parameters `optimizedp' and `unavailablep'. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_register_to_value): Adjust to new gdbarch_register_to_value interface. * i387-tdep.c (i387_register_to_value): Ditto. * i387-tdep.h (i387_register_to_value): Ditto. * alpha-tdep.c (alpha_register_to_value): Ditto. * ia64-tdep.c (ia64_register_to_value): Ditto. * m68k-tdep.c (m68k_register_to_value): Ditto. * mips-tdep.c (mips_register_to_value): Ditto. * rs6000-tdep.c (rs6000_register_to_value): Ditto.
2011-03-19 02:42:41 +08:00
int
gdbarch_register_to_value (struct gdbarch *gdbarch, struct frame_info *frame, int regnum, struct type *type, gdb_byte *buf, int *optimizedp, int *unavailablep)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->register_to_value != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_register_to_value called\n");
gdb/ * dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. (write_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out when doing a read-modify write of a bitfield. * findvar.c (value_from_register): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. * frame.c (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. Throw error on bad debug info. Use frame_register instead of frame_register_read, to fill in the new arguments. * frame.h (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. * valops.c: (value_assign): Adjust, and handle get_frame_register_bytes failing. * spu-tdep.c: Include exceptions.h. (spu_software_single_step): Adjust, and handle get_frame_register_bytes failing. (spu_get_longjmp_target): Ditto. * gdbarch.sh (register_to_value): Change to return int. New parameters `optimizedp' and `unavailablep'. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_register_to_value): Adjust to new gdbarch_register_to_value interface. * i387-tdep.c (i387_register_to_value): Ditto. * i387-tdep.h (i387_register_to_value): Ditto. * alpha-tdep.c (alpha_register_to_value): Ditto. * ia64-tdep.c (ia64_register_to_value): Ditto. * m68k-tdep.c (m68k_register_to_value): Ditto. * mips-tdep.c (mips_register_to_value): Ditto. * rs6000-tdep.c (rs6000_register_to_value): Ditto.
2011-03-19 02:42:41 +08:00
return gdbarch->register_to_value (frame, regnum, type, buf, optimizedp, unavailablep);
}
void
set_gdbarch_register_to_value (struct gdbarch *gdbarch,
gdbarch_register_to_value_ftype register_to_value)
{
gdbarch->register_to_value = register_to_value;
}
void
gdbarch_value_to_register (struct gdbarch *gdbarch, struct frame_info *frame, int regnum, struct type *type, const gdb_byte *buf)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->value_to_register != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_value_to_register called\n");
2003-06-14 Andrew Cagney <cagney@redhat.com> Mark Kettenis <kettenis@gnu.org> * gdbarch.sh (CONVERT_REGISTER_P): Add "type" parameter. (REGISTER_TO_VALUE, VALUE_TO_REGISTER): Replace raw buffer parameter with "frame". * gdbarch.h, gdbarch.c: Re-generate. * frame.h (put_frame_register): Declare. * frame.c (put_frame_register): New function. * arch-utils.c (legacy_convert_register_p): Add "type" parameter. (legacy_register_to_value): Rewrite, use "frame" to get the register value. (legacy_value_to_register): Rewrite, use "frame" to find the register's location before storing. * arch-utils.h (legacy_convert_register_p): Update. (legacy_register_to_value, legacy_value_to_register): Update. * findvar.c (value_from_register): Rewrite, eliminate use of REGISTER_CONVERT_TO_TYPE, pass "type" to CONVERT_REGISTER_P, pass "frame" to REGISTER_TO_VALUE. * valops.c (value_assign): Move the CONVERT_REGISTER code to the lval_reg_frame_relative + lval_register branch of the switch. Do not use REGISTER_CONVERT_FROM_TYPE. Use put_frame_register. * i386-tdep.c (I386_EBX_REGNUM, I386_ECX_REGNUM, I386_ESI_REGNUM, I386_EDI_REGNUM): New defines. (i386_next_regnum, i386_convert_register_p, i386_register_to_value, i386_value_to_register): New functions. (i386_register_convertible, i386_register_convert_to_virtual, i386_convert_to_raw): Remove functions. (i386_gdbarch_init): Set convert_register_p, register_to_value and value_to_register instead of register_convertible, register_convert_to_virtual and register_convert_to_raw. * mips-tdep.c (mips_convert_register_p): New function. (mips_value_to_register): Replace mips_register_convert_from_type. (mips_register_to_value): Replace mips_register_convert_to_type. (mips_gdbarch_init): Set conver_register_p, value_to_register and register_to_value. * alpha-tdep.c (alpha_convert_register_p): Update. (alpha_value_to_register): Update, store the register. (alpha_register_to_value): Update, fetch the register.
2003-06-15 06:35:25 +08:00
gdbarch->value_to_register (frame, regnum, type, buf);
}
void
set_gdbarch_value_to_register (struct gdbarch *gdbarch,
gdbarch_value_to_register_ftype value_to_register)
{
gdbarch->value_to_register = value_to_register;
}
struct value *
Use address_from_register in dwarf2-frame.c:read_addr_from_reg This patch fixes a problem that prevented use of the Dwarf unwinders on SPU, because dwarf2-frame.c common code did not support the situation where the stack and/or frame pointer is maintained in a *vector* register. This is because read_addr_from_reg is hard-coded to assume that such pointers can be read from registers via a simple get_frame_register / unpack_pointer operation. Now, there *is* a routine address_from_register that calls into the appropriate tdep routines to handle pointer values in "weird" registers like on SPU, but it turns out I cannot simply change dwarf2-frame.c to use address_from_register. This is because address_from_register uses value_from_register to create a (temporary) value, and that routine at some point calls get_frame_id in order to set up that value's VALUE_FRAME_ID entry. However, the dwarf2-frame.c read_addr_from_reg routine will be called during early unwinding (to unwind the frame's CFA), at which point the frame's ID is not actually known yet! This would cause an assert. On the other hand, we may notice that VALUE_FRAME_ID is only needed in the value returned by value_from_register if that value is later used as an lvalue. But this is obviously never done to the temporary value used in address_from_register. So, if we could change address_from_register to not call value_from_register but instead accept constructing a value that doesn't have VALUE_FRAME_ID set, things should be fine. To do that, we can change the value_from_register callback to accept a FRAME_ID instead of a FRAME; the only existing uses of the FRAME argument were either to extract its frame ID, or its gdbarch. (To keep a way of getting at the latter, we also change the callback's type from "f" to "m".) Together with the required follow-on changes in the existing value_from_register implementations (including the default one), this seems to fix the problem. As another minor interface cleanup, I've removed the explicit TYPE argument from address_from_register. This routine really always uses a default pointer type, and in the new implementation it -to some extent- relies on that fact, in that it will now no longer handle types that require gdbarch_convert_register_p handling. gdb: 2014-04-17 Ulrich Weigand  <uweigand@de.ibm.com> * gdbarch.sh (value_from_register): Make class "m" instead of "f". Replace FRAME argument with FRAME_ID. * gdbarch.c, gdbarch.h: Regenerate. * findvar.c (default_value_from_register): Add GDBARCH argument; replace FRAME by FRAME_ID. No longer call get_frame_id. (value_from_register): Update call to gdbarch_value_from_register. * value.h (default_value_from_register): Update prototype. * s390-linux-tdep.c (s390_value_from_register): Update interface and call to default_value_from_register. * spu-tdep.c (spu_value_from_register): Likewise. * findvar.c (address_from_register): Remove TYPE argument. Do not call value_from_register; use gdbarch_value_from_register with null_frame_id instead. * value.h (address_from_register): Update prototype. * dwarf2-frame.c (read_addr_from_reg): Use address_from_register. * dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for address_from_register interface change.
2014-04-17 20:01:39 +08:00
gdbarch_value_from_register (struct gdbarch *gdbarch, struct type *type, int regnum, struct frame_id frame_id)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->value_from_register != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_value_from_register called\n");
Use address_from_register in dwarf2-frame.c:read_addr_from_reg This patch fixes a problem that prevented use of the Dwarf unwinders on SPU, because dwarf2-frame.c common code did not support the situation where the stack and/or frame pointer is maintained in a *vector* register. This is because read_addr_from_reg is hard-coded to assume that such pointers can be read from registers via a simple get_frame_register / unpack_pointer operation. Now, there *is* a routine address_from_register that calls into the appropriate tdep routines to handle pointer values in "weird" registers like on SPU, but it turns out I cannot simply change dwarf2-frame.c to use address_from_register. This is because address_from_register uses value_from_register to create a (temporary) value, and that routine at some point calls get_frame_id in order to set up that value's VALUE_FRAME_ID entry. However, the dwarf2-frame.c read_addr_from_reg routine will be called during early unwinding (to unwind the frame's CFA), at which point the frame's ID is not actually known yet! This would cause an assert. On the other hand, we may notice that VALUE_FRAME_ID is only needed in the value returned by value_from_register if that value is later used as an lvalue. But this is obviously never done to the temporary value used in address_from_register. So, if we could change address_from_register to not call value_from_register but instead accept constructing a value that doesn't have VALUE_FRAME_ID set, things should be fine. To do that, we can change the value_from_register callback to accept a FRAME_ID instead of a FRAME; the only existing uses of the FRAME argument were either to extract its frame ID, or its gdbarch. (To keep a way of getting at the latter, we also change the callback's type from "f" to "m".) Together with the required follow-on changes in the existing value_from_register implementations (including the default one), this seems to fix the problem. As another minor interface cleanup, I've removed the explicit TYPE argument from address_from_register. This routine really always uses a default pointer type, and in the new implementation it -to some extent- relies on that fact, in that it will now no longer handle types that require gdbarch_convert_register_p handling. gdb: 2014-04-17 Ulrich Weigand  <uweigand@de.ibm.com> * gdbarch.sh (value_from_register): Make class "m" instead of "f". Replace FRAME argument with FRAME_ID. * gdbarch.c, gdbarch.h: Regenerate. * findvar.c (default_value_from_register): Add GDBARCH argument; replace FRAME by FRAME_ID. No longer call get_frame_id. (value_from_register): Update call to gdbarch_value_from_register. * value.h (default_value_from_register): Update prototype. * s390-linux-tdep.c (s390_value_from_register): Update interface and call to default_value_from_register. * spu-tdep.c (spu_value_from_register): Likewise. * findvar.c (address_from_register): Remove TYPE argument. Do not call value_from_register; use gdbarch_value_from_register with null_frame_id instead. * value.h (address_from_register): Update prototype. * dwarf2-frame.c (read_addr_from_reg): Use address_from_register. * dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for address_from_register interface change.
2014-04-17 20:01:39 +08:00
return gdbarch->value_from_register (gdbarch, type, regnum, frame_id);
}
void
set_gdbarch_value_from_register (struct gdbarch *gdbarch,
gdbarch_value_from_register_ftype value_from_register)
{
gdbarch->value_from_register = value_from_register;
}
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
CORE_ADDR
gdbarch_pointer_to_address (struct gdbarch *gdbarch, struct type *type, const gdb_byte *buf)
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->pointer_to_address != NULL);
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_pointer_to_address called\n");
return gdbarch->pointer_to_address (gdbarch, type, buf);
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
}
void
set_gdbarch_pointer_to_address (struct gdbarch *gdbarch,
gdbarch_pointer_to_address_ftype pointer_to_address)
{
gdbarch->pointer_to_address = pointer_to_address;
}
void
gdbarch_address_to_pointer (struct gdbarch *gdbarch, struct type *type, gdb_byte *buf, CORE_ADDR addr)
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->address_to_pointer != NULL);
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_address_to_pointer called\n");
gdbarch->address_to_pointer (gdbarch, type, buf, addr);
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-15 02:43:41 +08:00
}
void
set_gdbarch_address_to_pointer (struct gdbarch *gdbarch,
gdbarch_address_to_pointer_ftype address_to_pointer)
{
gdbarch->address_to_pointer = address_to_pointer;
}
int
gdbarch_integer_to_address_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->integer_to_address != NULL;
}
CORE_ADDR
gdbarch_integer_to_address (struct gdbarch *gdbarch, struct type *type, const gdb_byte *buf)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->integer_to_address != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_integer_to_address called\n");
return gdbarch->integer_to_address (gdbarch, type, buf);
}
void
set_gdbarch_integer_to_address (struct gdbarch *gdbarch,
gdbarch_integer_to_address_ftype integer_to_address)
{
gdbarch->integer_to_address = integer_to_address;
}
int
gdbarch_return_value_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->return_value != NULL;
}
enum return_value_convention
gdb/ * breakpoint.h (bp_location): Add related_address member. * inferior.h (get_return_value): Take a pointer to struct value instead of struct type for the function requested. * value.h (using_struct_return): Likewise. * gdbarch.sh (return_value): Take a pointer to struct value instead of struct type for the function requested. * breakpoint.c (set_breakpoint_location_function): Initialize related_address for bp_gnu_ifunc_resolver breakpoints. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the requested function's address to gdbarch_return_value. * eval.c (evaluate_subexp_standard): Pass the requested function's address to using_struct_return. * infcall.c (call_function_by_hand): Pass the requested function's address to using_struct_return and gdbarch_return_value. * infcmd.c (get_return_value): Take a pointer to struct value instead of struct type for the function requested. (print_return_value): Update accordingly. (finish_command_continuation): Likewise. * stack.c (return_command): Pass the requested function's address to using_struct_return and gdbarch_return_value. * value.c (using_struct_return): Take a pointer to struct value instead of struct type for the function requested. Pass the requested function's address to gdbarch_return_value. * python/py-finishbreakpoint.c (finish_breakpoint_object): New function_value member, replacing function_type. (bpfinishpy_dealloc): Update accordingly. (bpfinishpy_pre_stop_hook): Likewise. (bpfinishpy_init): Likewise. Record the requested function's address. * mips-tdep.c (mips_fval_reg): New enum. (mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap words put in GP registers. (mips_o64_push_dummy_call): Update a comment. (mips_o32_return_value): Take a pointer to struct value instead of struct type for the function requested and use it to check if using the MIPS16 calling convention. Return the designated general purpose registers for floating-point values returned in MIPS16 mode. (mips_o64_return_value): Likewise. * ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_return_value): Likewise. * alpha-tdep.c (alpha_return_value): Take a pointer to struct value instead of struct type for the function requested. * amd64-tdep.c (amd64_return_value): Likewise. * amd64-windows-tdep.c (amd64_windows_return_value): Likewise. * arm-tdep.c (arm_return_value): Likewise. * avr-tdep.c (avr_return_value): Likewise. * bfin-tdep.c (bfin_return_value): Likewise. * cris-tdep.c (cris_return_value): Likewise. * frv-tdep.c (frv_return_value): Likewise. * h8300-tdep.c (h8300_return_value): Likewise. (h8300h_return_value): Likewise. * hppa-tdep.c (hppa32_return_value): Likewise. (hppa64_return_value): Likewise. * i386-tdep.c (i386_return_value): Likewise. * ia64-tdep.c (ia64_return_value): Likewise. * iq2000-tdep.c (iq2000_return_value): Likewise. * lm32-tdep.c (lm32_return_value): Likewise. * m32c-tdep.c (m32c_return_value): Likewise. * m32r-tdep.c (m32r_return_value): Likewise. * m68hc11-tdep.c (m68hc11_return_value): Likewise. * m68k-tdep.c (m68k_return_value): Likewise. (m68k_svr4_return_value): Likewise. * m88k-tdep.c (m88k_return_value): Likewise. * mep-tdep.c (mep_return_value): Likewise. * microblaze-tdep.c (microblaze_return_value): Likewise. * mn10300-tdep.c (mn10300_return_value): Likewise. * moxie-tdep.c (moxie_return_value): Likewise. * mt-tdep.c (mt_return_value): Likewise. * ppc-linux-tdep.c (ppc_linux_return_value): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_return_value): Likewise. * ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise. * rl78-tdep.c (rl78_return_value): Likewise. * rs6000-aix-tdep.c (rs6000_return_value): Likewise. * rx-tdep.c (rx_return_value): Likewise. * s390-tdep.c (s390_return_value): Likewise. * score-tdep.c (score_return_value): Likewise. * sh-tdep.c (sh_return_value_nofpu): Likewise. (sh_return_value_fpu): Likewise. * sh64-tdep.c (sh64_return_value): Likewise. * sparc-tdep.c (sparc32_return_value): Likewise. * sparc64-tdep.c (sparc64_return_value): Likewise. * spu-tdep.c (spu_return_value): Likewise. * tic6x-tdep.c (tic6x_return_value): Likewise. * v850-tdep.c (v850_return_value): Likewise. * vax-tdep.c (vax_return_value): Likewise. * xstormy16-tdep.c (xstormy16_return_value): Likewise. * xtensa-tdep.c (xtensa_return_value): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/testsuite/ * gdb.base/return-nodebug.exp: Also test float and double types.
2012-05-16 22:35:09 +08:00
gdbarch_return_value (struct gdbarch *gdbarch, struct value *function, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->return_value != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_return_value called\n");
gdb/ * breakpoint.h (bp_location): Add related_address member. * inferior.h (get_return_value): Take a pointer to struct value instead of struct type for the function requested. * value.h (using_struct_return): Likewise. * gdbarch.sh (return_value): Take a pointer to struct value instead of struct type for the function requested. * breakpoint.c (set_breakpoint_location_function): Initialize related_address for bp_gnu_ifunc_resolver breakpoints. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the requested function's address to gdbarch_return_value. * eval.c (evaluate_subexp_standard): Pass the requested function's address to using_struct_return. * infcall.c (call_function_by_hand): Pass the requested function's address to using_struct_return and gdbarch_return_value. * infcmd.c (get_return_value): Take a pointer to struct value instead of struct type for the function requested. (print_return_value): Update accordingly. (finish_command_continuation): Likewise. * stack.c (return_command): Pass the requested function's address to using_struct_return and gdbarch_return_value. * value.c (using_struct_return): Take a pointer to struct value instead of struct type for the function requested. Pass the requested function's address to gdbarch_return_value. * python/py-finishbreakpoint.c (finish_breakpoint_object): New function_value member, replacing function_type. (bpfinishpy_dealloc): Update accordingly. (bpfinishpy_pre_stop_hook): Likewise. (bpfinishpy_init): Likewise. Record the requested function's address. * mips-tdep.c (mips_fval_reg): New enum. (mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap words put in GP registers. (mips_o64_push_dummy_call): Update a comment. (mips_o32_return_value): Take a pointer to struct value instead of struct type for the function requested and use it to check if using the MIPS16 calling convention. Return the designated general purpose registers for floating-point values returned in MIPS16 mode. (mips_o64_return_value): Likewise. * ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_return_value): Likewise. * alpha-tdep.c (alpha_return_value): Take a pointer to struct value instead of struct type for the function requested. * amd64-tdep.c (amd64_return_value): Likewise. * amd64-windows-tdep.c (amd64_windows_return_value): Likewise. * arm-tdep.c (arm_return_value): Likewise. * avr-tdep.c (avr_return_value): Likewise. * bfin-tdep.c (bfin_return_value): Likewise. * cris-tdep.c (cris_return_value): Likewise. * frv-tdep.c (frv_return_value): Likewise. * h8300-tdep.c (h8300_return_value): Likewise. (h8300h_return_value): Likewise. * hppa-tdep.c (hppa32_return_value): Likewise. (hppa64_return_value): Likewise. * i386-tdep.c (i386_return_value): Likewise. * ia64-tdep.c (ia64_return_value): Likewise. * iq2000-tdep.c (iq2000_return_value): Likewise. * lm32-tdep.c (lm32_return_value): Likewise. * m32c-tdep.c (m32c_return_value): Likewise. * m32r-tdep.c (m32r_return_value): Likewise. * m68hc11-tdep.c (m68hc11_return_value): Likewise. * m68k-tdep.c (m68k_return_value): Likewise. (m68k_svr4_return_value): Likewise. * m88k-tdep.c (m88k_return_value): Likewise. * mep-tdep.c (mep_return_value): Likewise. * microblaze-tdep.c (microblaze_return_value): Likewise. * mn10300-tdep.c (mn10300_return_value): Likewise. * moxie-tdep.c (moxie_return_value): Likewise. * mt-tdep.c (mt_return_value): Likewise. * ppc-linux-tdep.c (ppc_linux_return_value): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_return_value): Likewise. * ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise. * rl78-tdep.c (rl78_return_value): Likewise. * rs6000-aix-tdep.c (rs6000_return_value): Likewise. * rx-tdep.c (rx_return_value): Likewise. * s390-tdep.c (s390_return_value): Likewise. * score-tdep.c (score_return_value): Likewise. * sh-tdep.c (sh_return_value_nofpu): Likewise. (sh_return_value_fpu): Likewise. * sh64-tdep.c (sh64_return_value): Likewise. * sparc-tdep.c (sparc32_return_value): Likewise. * sparc64-tdep.c (sparc64_return_value): Likewise. * spu-tdep.c (spu_return_value): Likewise. * tic6x-tdep.c (tic6x_return_value): Likewise. * v850-tdep.c (v850_return_value): Likewise. * vax-tdep.c (vax_return_value): Likewise. * xstormy16-tdep.c (xstormy16_return_value): Likewise. * xtensa-tdep.c (xtensa_return_value): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/testsuite/ * gdb.base/return-nodebug.exp: Also test float and double types.
2012-05-16 22:35:09 +08:00
return gdbarch->return_value (gdbarch, function, valtype, regcache, readbuf, writebuf);
}
void
set_gdbarch_return_value (struct gdbarch *gdbarch,
gdbarch_return_value_ftype return_value)
{
gdbarch->return_value = return_value;
}
int
gdbarch_return_in_first_hidden_param_p (struct gdbarch *gdbarch, struct type *type)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->return_in_first_hidden_param_p != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_return_in_first_hidden_param_p called\n");
return gdbarch->return_in_first_hidden_param_p (gdbarch, type);
}
void
set_gdbarch_return_in_first_hidden_param_p (struct gdbarch *gdbarch,
gdbarch_return_in_first_hidden_param_p_ftype return_in_first_hidden_param_p)
{
gdbarch->return_in_first_hidden_param_p = return_in_first_hidden_param_p;
}
1999-06-15 02:08:47 +08:00
CORE_ADDR
gdbarch_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR ip)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->skip_prologue != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_skip_prologue called\n");
* gdbarch.sh (skip_prologue): Add gdbarch as parameter. * gdbarch.{c,h}: Regenerate. * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter. * amd64-tdep.c (amd64_skip_prologue): Likewise. * avr-tdep.c (avr_skip_prologue): Likewise. * cris-tdep.c (cris_skip_prologue): Likewise. * frv-tdep.c (frv_skip_prologue): Likewise. * h8300-tdep.c (h8300_skip_prologue): Likewise. * hppa-tdep.c (hppa_skip_prologue): Likewise. * i386-tdep.c (i386_skip_prologue): Likewise. * ia64-tdep.c (ia64_skip_prologue): Likewise. * iq2000-tdep.c (iq2000_skip_prologue): Likewise. * m32r-tdep.c (m32r_skip_prologue): Likewise. * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise. * m68k-tdep.c (m68k_skip_prologue): Likewise. * m88k-tdep.c (m88k_skip_prologue): Likewise. * mep-tdep.c (mep_skip_prologue): Likewise. * mips-tdep.c (mips_skip_prologue): Likewise. * mn10300-tdep.c (mn10300_skip_prologue): Likewise. * mt-tdep.c (mt_skip_prologue): Likewise. * rs6000-tdep.c (rs6000_skip_prologue): Likewise. * score-tdep.c (score_skip_prologue): Likewise. * sh64-tdep.c (sh64_skip_prologue): Likewise. * sh-tdep.c (sh_skip_prologue): Likewise. * sparc64-tdep.c (sparc64_skip_prologue): Likewise. * sparc-tdep.c (sparc32_skip_prologue): Likewise. * spu-tdep.c (spu_skip_prologue): Likewise. * v850-tdep.c (v850_skip_prologue): Likewise. * vax-tdep.c (vax_skip_prologue): Likewise. * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise. * xtensa-tdep.c (xtensa_skip_prologue): Likewise. * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace current_gdbarch by gdbarch. * m32c-tdep.c (m32c_skip_prologue): Likewise. * s390-tdep.c (s390_skip_prologue): Likewise.
2008-01-11 21:20:02 +08:00
return gdbarch->skip_prologue (gdbarch, ip);
1999-06-15 02:08:47 +08:00
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_skip_prologue (struct gdbarch *gdbarch,
gdbarch_skip_prologue_ftype skip_prologue)
1999-06-15 02:08:47 +08:00
{
gdbarch->skip_prologue = skip_prologue;
}
int
gdbarch_skip_main_prologue_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->skip_main_prologue != NULL;
}
CORE_ADDR
gdbarch_skip_main_prologue (struct gdbarch *gdbarch, CORE_ADDR ip)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->skip_main_prologue != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_skip_main_prologue called\n");
return gdbarch->skip_main_prologue (gdbarch, ip);
}
void
set_gdbarch_skip_main_prologue (struct gdbarch *gdbarch,
gdbarch_skip_main_prologue_ftype skip_main_prologue)
{
gdbarch->skip_main_prologue = skip_main_prologue;
}
PowerPC64 ELFv2 ABI: skip global entry point code This patch handles another aspect of the ELFv2 ABI, which unfortunately requires common code changes. In ELFv2, functions may provide both a global and a local entry point. The global entry point (where the function symbol points to) is intended to be used for function-pointer or cross-module (PLT) calls, and requires r12 to be set up to the entry point address itself. The local entry point (which is found at a fixed offset after the global entry point, as defined by bits in the symbol table entries' st_other field), instead expects r2 to be set up to the current TOC. Now, when setting a breakpoint on a function by name, you really want that breakpoint to trigger either way, no matter whether the function is called via its local or global entry point. Since the global entry point will always fall through into the local entry point, the way to achieve that is to simply set the breakpoint at the local entry point. One way to do that would be to have prologue parsing skip the code sequence that makes up the global entry point. Unfortunately, this does not work reliably, since -for optimized code- GDB these days will not actuall invoke the prologue parsing code but instead just set the breakpoint at the symbol address and rely on DWARF being correct at any point throughout the function ... Unfortunately, I don't really see any way to express the notion of local entry points with the current set of gdbarch callbacks. Thus this patch adds a new callback, skip_entrypoint, that is somewhat analogous to skip_prologue, but is called every time GDB needs to determine a function start address, even in those cases where GDB decides to not call skip_prologue. As a side effect, the skip_entrypoint implementation on ppc64 does not need to perform any instruction parsing; it can simply rely on the local entry point flags in the symbol table entry. With this implemented, two test cases would still fail to set the breakpoint correctly, but that's because they use the construct: gdb_test "break *hello" Now, using "*hello" explicitly instructs GDB to set the breakpoint at the numerical value of "hello" treated as function pointer, so it will by definition only hit the global entry point. I think this behaviour is unavoidable, but acceptable -- most people do not use this construct, and if they do, they get what they asked for ... In one of those two test cases, use of this construct is really not appropriate. I think this was added way back when as a means to work around prologue skipping problems on some platforms. These days that shouldn't really be necessary any more ... For the other (step-bt), we really want to make sure backtracing works on the very first instruction of the routine. To enable that test also on powerpc64le-linux, we can modify the code to call the test function via function pointer (which makes it use the global entry point in the ELFv2 ABI). gdb/ChangeLog: * gdbarch.sh (skip_entrypoint): New callback. * gdbarch.c, gdbarch.h: Regenerate. * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint. * infrun.c (fill_in_stop_func): Likewise. * ppc-linux-tdep.c: Include "elf/ppc64.h". (ppc_elfv2_elf_make_msymbol_special): New function. (ppc_elfv2_skip_entrypoint): Likewise. (ppc_linux_init_abi): Install them for ELFv2. gdb/testsuite/ChangeLog: * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint on a function. * gdb.base/step-bt.c: Call hello via function pointer to make sure its first instruction is executed on powerpc64le-linux.
2014-02-05 01:44:14 +08:00
int
gdbarch_skip_entrypoint_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->skip_entrypoint != NULL;
}
CORE_ADDR
gdbarch_skip_entrypoint (struct gdbarch *gdbarch, CORE_ADDR ip)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->skip_entrypoint != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_skip_entrypoint called\n");
return gdbarch->skip_entrypoint (gdbarch, ip);
}
void
set_gdbarch_skip_entrypoint (struct gdbarch *gdbarch,
gdbarch_skip_entrypoint_ftype skip_entrypoint)
{
gdbarch->skip_entrypoint = skip_entrypoint;
}
1999-06-15 02:08:47 +08:00
int
gdbarch_inner_than (struct gdbarch *gdbarch, CORE_ADDR lhs, CORE_ADDR rhs)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->inner_than != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_inner_than called\n");
return gdbarch->inner_than (lhs, rhs);
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_inner_than (struct gdbarch *gdbarch,
gdbarch_inner_than_ftype inner_than)
1999-06-15 02:08:47 +08:00
{
gdbarch->inner_than = inner_than;
}
const gdb_byte *
1999-07-20 07:30:11 +08:00
gdbarch_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->breakpoint_from_pc != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_breakpoint_from_pc called\n");
2007-11-07 14:33:01 +08:00
return gdbarch->breakpoint_from_pc (gdbarch, pcptr, lenptr);
1999-06-15 02:08:47 +08:00
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_breakpoint_from_pc (struct gdbarch *gdbarch,
gdbarch_breakpoint_from_pc_ftype breakpoint_from_pc)
1999-06-15 02:08:47 +08:00
{
gdbarch->breakpoint_from_pc = breakpoint_from_pc;
}
New gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind This patch adds two gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind, and uses target_info.placed_size as "kind" of the breakpoint. This patch updates the usages of target_info.placed_size. The "kind" of a breakpoint is determined by gdbarch rather than target, so we have gdbarch method breakpoint_kind_from_pc, and we should set target_info.placed_size out of each implementation of target to_insert_breakpoint. In this way, each target doesn't have to set target_info.placed_size any more. This patch also sets target_info.placed_address before target_insert_breakpoint too, so that target to_insert_breakpoint can use it, see record_full_insert_breakpoint. Before we call target_insert_breakpoint, we set target_info.placed_address and target_info.placed_size like this, CORE_ADDR addr = bl->target_info.reqstd_address; bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr); bl->target_info.placed_address = addr; return target_insert_breakpoint (bl->gdbarch, &bl->target_info); target_insert_breakpoint may fail, but it doesn't matter to the "kind" and "placed_address" of a breakpoint. They should be determined by gdbarch. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define breakpoint_kind_from_pc and sw_breakpoint_from_kind. (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call set_gdbarch_breakpoint_kind_from_pc and set_gdbarch_sw_breakpoint_from_kind. * arm-tdep.c: Add comments. * bfin-tdep.c: Likewise. * breakpoint.c (breakpoint_kind): New function. (insert_bp_location): Set target_info.placed_size and target_info.placed_address. (bkpt_insert_location): Likewise. * cris-tdep.c: Add comments. * gdbarch.sh (breakpoint_kind_from_pc): New. (sw_breakpoint_from_kind): New. * gdbarch.c, gdbarch.h: Regenerated. * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set bp_tgt->placed_size. (ia64_memory_remove_breakpoint): Don't assert bp_tgt->placed_size. (ia64_breakpoint_kind_from_pc): New function. (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc. * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set bp_tgt->placed_size. * mem-break.c (default_memory_insert_breakpoint): Don't set bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind. (default_memory_remove_breakpoint): Call gdbarch_sw_breakpoint_from_kind. (memory_validate_breakpoint): Don't check bp_tgt->placed_size. * mips-tdep.c: Add comments. * mt-tdep.c: Likewise. * nios2-tdep.c: Likewise. * record-full.c (record_full_insert_breakpoint): Don't call gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address and bp_tgt->placed_size. * remote.c (remote_insert_breakpoint): Don't call gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size. Don't set bp_tgt->placed_address and bp_tgt->placed_size. (remote_insert_hw_breakpoint): Likewise. * score-tdep.c: Likewise. * sh-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * v850-tdep.c: Likewise. * xtensa-tdep.c: Likewise.
2016-11-03 22:35:13 +08:00
int
gdbarch_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->breakpoint_kind_from_pc != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_breakpoint_kind_from_pc called\n");
return gdbarch->breakpoint_kind_from_pc (gdbarch, pcptr);
}
void
set_gdbarch_breakpoint_kind_from_pc (struct gdbarch *gdbarch,
gdbarch_breakpoint_kind_from_pc_ftype breakpoint_kind_from_pc)
{
gdbarch->breakpoint_kind_from_pc = breakpoint_kind_from_pc;
}
const gdb_byte *
gdbarch_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->sw_breakpoint_from_kind != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_sw_breakpoint_from_kind called\n");
return gdbarch->sw_breakpoint_from_kind (gdbarch, kind, size);
}
void
set_gdbarch_sw_breakpoint_from_kind (struct gdbarch *gdbarch,
gdbarch_sw_breakpoint_from_kind_ftype sw_breakpoint_from_kind)
{
gdbarch->sw_breakpoint_from_kind = sw_breakpoint_from_kind;
}
int
gdbarch_breakpoint_kind_from_current_state (struct gdbarch *gdbarch, struct regcache *regcache, CORE_ADDR *pcptr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->breakpoint_kind_from_current_state != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_breakpoint_kind_from_current_state called\n");
return gdbarch->breakpoint_kind_from_current_state (gdbarch, regcache, pcptr);
}
void
set_gdbarch_breakpoint_kind_from_current_state (struct gdbarch *gdbarch,
gdbarch_breakpoint_kind_from_current_state_ftype breakpoint_kind_from_current_state)
{
gdbarch->breakpoint_kind_from_current_state = breakpoint_kind_from_current_state;
}
int
gdbarch_adjust_breakpoint_address_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->adjust_breakpoint_address != NULL;
}
CORE_ADDR
gdbarch_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->adjust_breakpoint_address != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_adjust_breakpoint_address called\n");
return gdbarch->adjust_breakpoint_address (gdbarch, bpaddr);
}
void
set_gdbarch_adjust_breakpoint_address (struct gdbarch *gdbarch,
gdbarch_adjust_breakpoint_address_ftype adjust_breakpoint_address)
{
gdbarch->adjust_breakpoint_address = adjust_breakpoint_address;
}
1999-10-19 10:47:02 +08:00
int
gdb/ * breakpoint.c (deprecated_read_memory_nobpt): Update to use shadow_len. (insert_bp_location, reattach_breakpoints, remove_breakpoint) (delete_breakpoint): Update calls to changed methods. (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) (single_step_breakpoints, insert_single_step_breakpoint) (remove_single_step_breakpoints): New. * breakpoint.h (struct bp_target_info): New. (struct bp_location): Replace shadow_contents with target_info and overlay_target_info. (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) (insert_single_step_breakpoint, remove_single_step_breakpoints): New prototypes. * gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h. (memory_insert_breakpoint, memory_remove_breakpoint): Update second argument. * mem-break.c (default_memory_insert_breakpoint): Update. Set placed_address, placed_size, and shadow_len. (default_memory_remove_breakpoint): Update. Don't use BREAKPOINT_FROM_PC. (memory_insert_breakpoint, memory_remove_breakpoint): Update. * target.c (update_current_target): Update prototypes for changed functions. (debug_to_insert_breakpoint, debug_to_remove_breakpoint) (debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Update. * target.h: Forward declare struct bp_target_info. (struct target_ops): Use a bp_target_info argument for to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint. (target_insert_breakpoint, target_remove_breakpoint) (target_insert_hw_breakpoint, target_remove_hw_breakpoint) (memory_insert_breakpoint, memory_remove_breakpoint) (default_memory_insert_breakpoint, default_memory_remove_breakpoint): Update. * config/i386/nm-i386.h: Forward declare struct bp_target_info. (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * alpha-tdep.c (alpha_software_single_step): Use insert_single_step_breakpoint and remove_single_step_breakpoints. Remove unused statics. * arm-tdep.c (arm_software_single_step): Likewise. Add a note. * cris-tdep.c (cris_software_single_step): Likewise. * mips-tdep.c (mips_software_single_step): Likewise. * rs6000-tdep.c (rs6000_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * wince.c (struct thread_info_struct): Remove step_prev. (undoSStep): Use remove_single_step_breakpoints. (wince_software_single_step): Use insert_single_step_breakpoint. * corelow.c (ignore): Remove unneeded prototype. Update arguments. * exec.c (ignore): Likewise. * sol-thread.c (ignore): Likewise. * procfs.c (dbx_link_shadow_contents): Delete. (dbx_link_bpt): New. (procfs_mourn_inferior): Remove it if necessary. (remove_dbx_link_breakpoint): Use it. (insert_dbx_link_bpt_in_file): Set it. (procfs_init_inferior): Don't update dbx_link_bpt_addr. * rs6000-nat.c (exec_one_dummy_insn): Use deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint. * solib-irix.c (shadow_contents, breakpoint_addr): Delete. (base_breakpoint): New. (disable_break): Use it. (enable_break): Set it. * i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint) (ia64_memory_remove_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint) (m32r_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Likewise. Remove unnecessary prototypes. Use placed_address and placed_size. Removed useless read from memory. * nto-procfs.c (procfs_insert_breakpoint) (procfs_remove_breakpoint, procfs_insert_hw_breakpoint) (procfs_remove_hw_breakpoint): Update. * ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. * ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise. * remote-e7000.c (e7000_insert_breakpoint) (e7000_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint) (mips_remove_breakpoint): Likewise. * remote-rdp.c (remote_rdp_insert_breakpoint) (remote_rdp_remove_breakpoint): Likewise. (rdp_step): Use deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint. * remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint): Update. * remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint): Delete. (init_gdbsim_ops): Use memory_insert_breakpoint and memory_remove_breakpoint. * remote-st.c (st2000_insert_breakpoint) (st2000_remove_breakpoint): Update. Remove unused BREAKPOINT_FROM_PC. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Update. Use placed_address and placed_size. (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise. gdb/doc/ * gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert and remove breakpoint prototypes. (Watchpoints): Move description of target_insert_hw_breakpoint and target_remove_hw_breakpoint ... (Breakpoints): ... to here. Document target_insert_breakpoint and target_remove_breakpoint.
2006-04-19 03:20:08 +08:00
gdbarch_memory_insert_breakpoint (struct gdbarch *gdbarch, struct bp_target_info *bp_tgt)
1999-10-19 10:47:02 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->memory_insert_breakpoint != NULL);
1999-10-19 10:47:02 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_memory_insert_breakpoint called\n");
return gdbarch->memory_insert_breakpoint (gdbarch, bp_tgt);
1999-10-19 10:47:02 +08:00
}
void
set_gdbarch_memory_insert_breakpoint (struct gdbarch *gdbarch,
gdbarch_memory_insert_breakpoint_ftype memory_insert_breakpoint)
{
gdbarch->memory_insert_breakpoint = memory_insert_breakpoint;
}
int
gdb/ * breakpoint.c (deprecated_read_memory_nobpt): Update to use shadow_len. (insert_bp_location, reattach_breakpoints, remove_breakpoint) (delete_breakpoint): Update calls to changed methods. (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) (single_step_breakpoints, insert_single_step_breakpoint) (remove_single_step_breakpoints): New. * breakpoint.h (struct bp_target_info): New. (struct bp_location): Replace shadow_contents with target_info and overlay_target_info. (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) (insert_single_step_breakpoint, remove_single_step_breakpoints): New prototypes. * gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h. (memory_insert_breakpoint, memory_remove_breakpoint): Update second argument. * mem-break.c (default_memory_insert_breakpoint): Update. Set placed_address, placed_size, and shadow_len. (default_memory_remove_breakpoint): Update. Don't use BREAKPOINT_FROM_PC. (memory_insert_breakpoint, memory_remove_breakpoint): Update. * target.c (update_current_target): Update prototypes for changed functions. (debug_to_insert_breakpoint, debug_to_remove_breakpoint) (debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Update. * target.h: Forward declare struct bp_target_info. (struct target_ops): Use a bp_target_info argument for to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint. (target_insert_breakpoint, target_remove_breakpoint) (target_insert_hw_breakpoint, target_remove_hw_breakpoint) (memory_insert_breakpoint, memory_remove_breakpoint) (default_memory_insert_breakpoint, default_memory_remove_breakpoint): Update. * config/i386/nm-i386.h: Forward declare struct bp_target_info. (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * alpha-tdep.c (alpha_software_single_step): Use insert_single_step_breakpoint and remove_single_step_breakpoints. Remove unused statics. * arm-tdep.c (arm_software_single_step): Likewise. Add a note. * cris-tdep.c (cris_software_single_step): Likewise. * mips-tdep.c (mips_software_single_step): Likewise. * rs6000-tdep.c (rs6000_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * wince.c (struct thread_info_struct): Remove step_prev. (undoSStep): Use remove_single_step_breakpoints. (wince_software_single_step): Use insert_single_step_breakpoint. * corelow.c (ignore): Remove unneeded prototype. Update arguments. * exec.c (ignore): Likewise. * sol-thread.c (ignore): Likewise. * procfs.c (dbx_link_shadow_contents): Delete. (dbx_link_bpt): New. (procfs_mourn_inferior): Remove it if necessary. (remove_dbx_link_breakpoint): Use it. (insert_dbx_link_bpt_in_file): Set it. (procfs_init_inferior): Don't update dbx_link_bpt_addr. * rs6000-nat.c (exec_one_dummy_insn): Use deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint. * solib-irix.c (shadow_contents, breakpoint_addr): Delete. (base_breakpoint): New. (disable_break): Use it. (enable_break): Set it. * i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint) (ia64_memory_remove_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint) (m32r_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Likewise. Remove unnecessary prototypes. Use placed_address and placed_size. Removed useless read from memory. * nto-procfs.c (procfs_insert_breakpoint) (procfs_remove_breakpoint, procfs_insert_hw_breakpoint) (procfs_remove_hw_breakpoint): Update. * ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. * ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise. * remote-e7000.c (e7000_insert_breakpoint) (e7000_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint) (mips_remove_breakpoint): Likewise. * remote-rdp.c (remote_rdp_insert_breakpoint) (remote_rdp_remove_breakpoint): Likewise. (rdp_step): Use deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint. * remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint): Update. * remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint): Delete. (init_gdbsim_ops): Use memory_insert_breakpoint and memory_remove_breakpoint. * remote-st.c (st2000_insert_breakpoint) (st2000_remove_breakpoint): Update. Remove unused BREAKPOINT_FROM_PC. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Update. Use placed_address and placed_size. (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise. gdb/doc/ * gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert and remove breakpoint prototypes. (Watchpoints): Move description of target_insert_hw_breakpoint and target_remove_hw_breakpoint ... (Breakpoints): ... to here. Document target_insert_breakpoint and target_remove_breakpoint.
2006-04-19 03:20:08 +08:00
gdbarch_memory_remove_breakpoint (struct gdbarch *gdbarch, struct bp_target_info *bp_tgt)
1999-10-19 10:47:02 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->memory_remove_breakpoint != NULL);
1999-10-19 10:47:02 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_memory_remove_breakpoint called\n");
return gdbarch->memory_remove_breakpoint (gdbarch, bp_tgt);
1999-10-19 10:47:02 +08:00
}
void
set_gdbarch_memory_remove_breakpoint (struct gdbarch *gdbarch,
gdbarch_memory_remove_breakpoint_ftype memory_remove_breakpoint)
{
gdbarch->memory_remove_breakpoint = memory_remove_breakpoint;
}
1999-06-15 02:08:47 +08:00
CORE_ADDR
1999-08-31 09:14:27 +08:00
gdbarch_decr_pc_after_break (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
/* Skip verify of decr_pc_after_break, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_decr_pc_after_break called\n");
return gdbarch->decr_pc_after_break;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_decr_pc_after_break (struct gdbarch *gdbarch,
CORE_ADDR decr_pc_after_break)
1999-06-15 02:08:47 +08:00
{
gdbarch->decr_pc_after_break = decr_pc_after_break;
}
CORE_ADDR
gdbarch_deprecated_function_start_offset (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
/* Skip verify of deprecated_function_start_offset, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_deprecated_function_start_offset called\n");
return gdbarch->deprecated_function_start_offset;
1999-06-15 02:08:47 +08:00
}
void
set_gdbarch_deprecated_function_start_offset (struct gdbarch *gdbarch,
CORE_ADDR deprecated_function_start_offset)
1999-06-15 02:08:47 +08:00
{
gdbarch->deprecated_function_start_offset = deprecated_function_start_offset;
1999-06-15 02:08:47 +08:00
}
* Makefile.in (arm-tdep.o, eval.o, target-descriptions.o) (xml-tdesc.o): Update. * xml-support.c: Add a comment. (gdb_xml_enums_boolean): New variable. (gdb_xml_parse_attr_enum): Use strcasecmp. * xml-support.h (gdb_xml_enums_boolean): Declare. * xml-tdesc.c (struct tdesc_parsing_data): Record current_feature, next_regnum, and current_union. (tdesc_start_feature, tdesc_start_reg, tdesc_start_union) (tdesc_end_union, tdesc_start_field, tdesc_start_vector) (field_attributes, union_children, reg_attributes, union_attributes) (vector_attributes, feature_attributes, feature_children): New. (target_children): Make static. Add <feature>. (tdesc_elements): Make static. * target-descriptions.c (struct tdesc_reg, tdesc_reg_p, type_p) (struct tdesc_feature, tdesc_feature_p): New types. (struct target_desc): Add features member. (struct tdesc_arch_data, tdesc_data): New. (target_find_description): Clarify error message. Warn about ignored register descriptions. (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_data_init, tdesc_data_alloc) (tdesc_data_cleanup, tdesc_numbered_register) (tdesc_numbered_register_choices, tdesc_find_register) (tdesc_register_name, tdesc_register_type) (tdesc_remote_register_number, tdesc_register_reggroup_p) (set_tdesc_pseudo_register_name, set_tdesc_pseudo_register_type) (set_tdesc_pseudo_register_reggroup_p, tdesc_use_registers) (tdesc_free_reg, tdesc_create_reg, tdesc_free_feature) (tdesc_create_feature, tdesc_record_type): New. (free_target_description): Free features. (_initialize_target_descriptions): Initialize tdesc_data. * arch-utils.c (default_remote_register_number): New. * arch-utils.h (default_remote_register_number): New prototype. * target-descriptions.h (set_tdesc_pseudo_register_name) (set_tdesc_pseudo_register_type, set_tdesc_pseudo_register_reggroup_p) (tdesc_use_registers, tdesc_data_alloc, tdesc_data_cleanup) (tdesc_numbered_register, tdesc_numbered_register_choices) (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_create_feature, tdesc_record_type) (tdesc_create_reg): Declare. * gdbarch.sh (remote_register_number): New entry. * gdbarch.c, gdbarch.h: Regenerate. * remote.c (init_remote_state): Use gdbarch_remote_register_number. * features/gdb-target.dtd: Add feature, reg, vector, union, and field. * arm-tdep.c (arm_register_aliases): New. (arm_register_name_strings): Rename to... (arm_register_names): ...this. Make const. Delete the old version. (current_option, arm_register_byte): Delete. (set_disassembly_style): Simplify. Do not adjust arm_register_names. (value_of_arm_user_reg): New. (arm_gdbarch_init): Verify any described registers. Call tdesc_use_registers. Don't use arm_register_byte. Create aliases for standard register names. (_initialize_arm_tdep): Do not adjust arm_register_names. * user-regs.c (struct user_reg): Add baton member. (append_user_reg, user_reg_add_builtin, user_regs_init) (user_reg_add, value_of_user_reg): Use a baton for user register functions. * std-regs.c: Update. * user-regs.h (user_reg_read_ftype, user_reg_add_builtin) (user_reg_add): Add baton argument. * NEWS: Mention target description register support. * features/arm-core.xml, features/arm-fpa.xml: New. * eval.c (evaluate_subexp_standard): Allow ptype $register when the program is not running. * gdb.texinfo (-target-disconnect): Use @smallexample. (Requirements): Add anchor for Expat. Update description. (Target Descriptions): Mention Expat. (Target Description Format): Document new elements. Use @smallexample. (Predefined Target Types, Standard Target Features): New sections. * doc/gdbint.texinfo (Target Descriptions): New section. * gdb.xml/single-reg.xml, gdb.xml/tdesc-regs.exp, gdb.xml/core-only.xml, gdb.xml/extra-regs.xml: New files.
2007-02-09 05:00:36 +08:00
int
gdbarch_remote_register_number (struct gdbarch *gdbarch, int regno)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->remote_register_number != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_remote_register_number called\n");
return gdbarch->remote_register_number (gdbarch, regno);
}
void
set_gdbarch_remote_register_number (struct gdbarch *gdbarch,
gdbarch_remote_register_number_ftype remote_register_number)
{
gdbarch->remote_register_number = remote_register_number;
}
int
gdbarch_fetch_tls_load_module_address_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->fetch_tls_load_module_address != NULL;
}
CORE_ADDR
gdbarch_fetch_tls_load_module_address (struct gdbarch *gdbarch, struct objfile *objfile)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->fetch_tls_load_module_address != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_fetch_tls_load_module_address called\n");
return gdbarch->fetch_tls_load_module_address (objfile);
}
void
set_gdbarch_fetch_tls_load_module_address (struct gdbarch *gdbarch,
gdbarch_fetch_tls_load_module_address_ftype fetch_tls_load_module_address)
{
gdbarch->fetch_tls_load_module_address = fetch_tls_load_module_address;
}
1999-06-15 02:08:47 +08:00
CORE_ADDR
1999-08-31 09:14:27 +08:00
gdbarch_frame_args_skip (struct gdbarch *gdbarch)
1999-06-15 02:08:47 +08:00
{
gdb_assert (gdbarch != NULL);
/* Skip verify of frame_args_skip, invalid_p == 0 */
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_frame_args_skip called\n");
return gdbarch->frame_args_skip;
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_frame_args_skip (struct gdbarch *gdbarch,
CORE_ADDR frame_args_skip)
1999-06-15 02:08:47 +08:00
{
gdbarch->frame_args_skip = frame_args_skip;
}
int
gdbarch_unwind_pc_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->unwind_pc != NULL;
}
CORE_ADDR
gdbarch_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->unwind_pc != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_unwind_pc called\n");
return gdbarch->unwind_pc (gdbarch, next_frame);
}
void
set_gdbarch_unwind_pc (struct gdbarch *gdbarch,
gdbarch_unwind_pc_ftype unwind_pc)
{
gdbarch->unwind_pc = unwind_pc;
}
int
gdbarch_unwind_sp_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->unwind_sp != NULL;
}
CORE_ADDR
gdbarch_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->unwind_sp != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_unwind_sp called\n");
return gdbarch->unwind_sp (gdbarch, next_frame);
}
void
set_gdbarch_unwind_sp (struct gdbarch *gdbarch,
gdbarch_unwind_sp_ftype unwind_sp)
{
gdbarch->unwind_sp = unwind_sp;
}
2003-06-09 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (FRAME_NUM_ARGS): Change to function with predicate. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (frame_num_args_unknown): Delete both declarations. * arch-utils.c (frame_num_args_unknown): Delete function. * stack.c (print_args_stub): Use FRAME_NUM_ARGS_P. (frame_info): Use FRAME_NUM_ARGS_P. * arm-tdep.c (arm_frame_num_args): Delete function. (arm_gdbarch_init): Do not set frame_num_args. * config/pa/tm-hppa64.h (FRAME_NUM_ARGS): Delete. * hppa-tdep.c (hppa_frame_num_args): Delete function. (hppa_gdbarch_init): Do not set frame_num_args. * config/sparc/tm-sparc.h (FRAME_NUM_ARGS): Delete. * xstormy16-tdep.c (xstormy16_gdbarch_init): Do not set frame_num_args to default frame_num_args_unknown. * v850-tdep.c (v850_gdbarch_init): Ditto. * sparc-tdep.c (sparc_gdbarch_init): Ditto. * sh-tdep.c (sh_gdbarch_init): Ditto. * s390-tdep.c (s390_gdbarch_init): Ditto. * rs6000-tdep.c (rs6000_gdbarch_init): Ditto. * mn10300-tdep.c (mn10300_gdbarch_init): Ditto. * mips-tdep.c (mips_gdbarch_init): Ditto. * mcore-tdep.c (mcore_gdbarch_init): Ditto. * m68k-tdep.c (m68k_gdbarch_init): Ditto. * m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto. * ia64-tdep.c (ia64_gdbarch_init): Ditto. * i386-tdep.c (i386_gdbarch_init): Ditto. * h8300-tdep.c (h8300_gdbarch_init): Ditto. * frv-tdep.c (frv_gdbarch_init): Ditto. * d10v-tdep.c (d10v_gdbarch_init): Ditto. * cris-tdep.c (cris_gdbarch_init): Ditto. * avr-tdep.c (avr_gdbarch_init): Ditto. * alpha-tdep.c (alpha_gdbarch_init): Ditto.
2003-06-10 01:35:59 +08:00
int
gdbarch_frame_num_args_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->frame_num_args != NULL;
2003-06-09 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (FRAME_NUM_ARGS): Change to function with predicate. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (frame_num_args_unknown): Delete both declarations. * arch-utils.c (frame_num_args_unknown): Delete function. * stack.c (print_args_stub): Use FRAME_NUM_ARGS_P. (frame_info): Use FRAME_NUM_ARGS_P. * arm-tdep.c (arm_frame_num_args): Delete function. (arm_gdbarch_init): Do not set frame_num_args. * config/pa/tm-hppa64.h (FRAME_NUM_ARGS): Delete. * hppa-tdep.c (hppa_frame_num_args): Delete function. (hppa_gdbarch_init): Do not set frame_num_args. * config/sparc/tm-sparc.h (FRAME_NUM_ARGS): Delete. * xstormy16-tdep.c (xstormy16_gdbarch_init): Do not set frame_num_args to default frame_num_args_unknown. * v850-tdep.c (v850_gdbarch_init): Ditto. * sparc-tdep.c (sparc_gdbarch_init): Ditto. * sh-tdep.c (sh_gdbarch_init): Ditto. * s390-tdep.c (s390_gdbarch_init): Ditto. * rs6000-tdep.c (rs6000_gdbarch_init): Ditto. * mn10300-tdep.c (mn10300_gdbarch_init): Ditto. * mips-tdep.c (mips_gdbarch_init): Ditto. * mcore-tdep.c (mcore_gdbarch_init): Ditto. * m68k-tdep.c (m68k_gdbarch_init): Ditto. * m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto. * ia64-tdep.c (ia64_gdbarch_init): Ditto. * i386-tdep.c (i386_gdbarch_init): Ditto. * h8300-tdep.c (h8300_gdbarch_init): Ditto. * frv-tdep.c (frv_gdbarch_init): Ditto. * d10v-tdep.c (d10v_gdbarch_init): Ditto. * cris-tdep.c (cris_gdbarch_init): Ditto. * avr-tdep.c (avr_gdbarch_init): Ditto. * alpha-tdep.c (alpha_gdbarch_init): Ditto.
2003-06-10 01:35:59 +08:00
}
1999-06-15 02:08:47 +08:00
int
gdbarch_frame_num_args (struct gdbarch *gdbarch, struct frame_info *frame)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->frame_num_args != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_frame_num_args called\n");
return gdbarch->frame_num_args (frame);
}
void
1999-08-31 09:14:27 +08:00
set_gdbarch_frame_num_args (struct gdbarch *gdbarch,
gdbarch_frame_num_args_ftype frame_num_args)
1999-06-15 02:08:47 +08:00
{
gdbarch->frame_num_args = frame_num_args;
}
int
gdbarch_frame_align_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->frame_align != NULL;
}
CORE_ADDR
gdbarch_frame_align (struct gdbarch *gdbarch, CORE_ADDR address)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->frame_align != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_frame_align called\n");
return gdbarch->frame_align (gdbarch, address);
}
void
set_gdbarch_frame_align (struct gdbarch *gdbarch,
gdbarch_frame_align_ftype frame_align)
{
gdbarch->frame_align = frame_align;
}
int
gdbarch_stabs_argument_has_addr (struct gdbarch *gdbarch, struct type *type)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->stabs_argument_has_addr != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_stabs_argument_has_addr called\n");
return gdbarch->stabs_argument_has_addr (gdbarch, type);
}
void
set_gdbarch_stabs_argument_has_addr (struct gdbarch *gdbarch,
gdbarch_stabs_argument_has_addr_ftype stabs_argument_has_addr)
{
gdbarch->stabs_argument_has_addr = stabs_argument_has_addr;
}
int
gdbarch_frame_red_zone_size (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_frame_red_zone_size called\n");
return gdbarch->frame_red_zone_size;
}
void
set_gdbarch_frame_red_zone_size (struct gdbarch *gdbarch,
int frame_red_zone_size)
{
gdbarch->frame_red_zone_size = frame_red_zone_size;
}
CORE_ADDR
gdbarch_convert_from_func_ptr_addr (struct gdbarch *gdbarch, CORE_ADDR addr, struct target_ops *targ)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->convert_from_func_ptr_addr != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_convert_from_func_ptr_addr called\n");
return gdbarch->convert_from_func_ptr_addr (gdbarch, addr, targ);
}
void
set_gdbarch_convert_from_func_ptr_addr (struct gdbarch *gdbarch,
gdbarch_convert_from_func_ptr_addr_ftype convert_from_func_ptr_addr)
{
gdbarch->convert_from_func_ptr_addr = convert_from_func_ptr_addr;
}
2001-06-16 06:10:21 +08:00
CORE_ADDR
gdbarch_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->addr_bits_remove != NULL);
2001-06-16 06:10:21 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_addr_bits_remove called\n");
return gdbarch->addr_bits_remove (gdbarch, addr);
2001-06-16 06:10:21 +08:00
}
void
set_gdbarch_addr_bits_remove (struct gdbarch *gdbarch,
gdbarch_addr_bits_remove_ftype addr_bits_remove)
{
gdbarch->addr_bits_remove = addr_bits_remove;
}
Clear non-significant bits of address on memory access ARMv8 supports tagged address, that is, the top one byte in address is ignored. It is always enabled on aarch64-linux. See https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt The tag in the tagged address is modeled as non-significant bits in address, so this patch adds a new gdbarch method significant_addr_bit and clear the non-significant bits (the top byte in ARMv8) of the virtual address at the point before passing address to target cache layer. IOW, the address used in the target cache layer is already cleared. Before this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: Cannot access memory at address 0xf000000000411030 After this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: 0x00000000 Note that I used address_significant in paddress, but it causes a regression gdb.base/long_long.exp, because gdb clears the non-significant bits in address, but test still expects them. p/a val.oct^M $24 = 0x2ee53977053977^M (gdb) FAIL: gdb.base/long_long.exp: p/a val.oct so I defer the change there. gdb: 2017-12-08 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_gdbarch_init): Install gdbarch significant_addr_bit. * gdbarch.sh (significant_addr_bit): New. * gdbarch.c, gdbarch.h: Re-generated. * target.c (memory_xfer_partial): Call address_significant. * utils.c (address_significant): New function. * utils.h (address_significant): Declare. 2017-12-08 Yao Qi <yao.qi@linaro.org> gdb/testsuite: * gdb.arch/aarch64-tagged-pointer.c: New file. * gdb.arch/aarch64-tagged-pointer.exp: New file.
2017-12-09 01:27:03 +08:00
int
gdbarch_significant_addr_bit (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_significant_addr_bit called\n");
return gdbarch->significant_addr_bit;
}
void
set_gdbarch_significant_addr_bit (struct gdbarch *gdbarch,
int significant_addr_bit)
{
gdbarch->significant_addr_bit = significant_addr_bit;
}
int
gdbarch_software_single_step_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->software_single_step != NULL;
}
Change return type of gdbarch_software_single_step to vector<CORE_ADDR> This is a relatively straightforward patch that changes gdbarch_software_single_step so it returns an std::vector<CORE_ADDR> instead of a VEC (CORE_ADDR). gdb/ChangeLog: * gdbarch.sh (software_single_step): Change return type to std::vector<CORE_ADDR>. * gdbarch.c, gdbarch.h: Re-generate. * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw): Adjust. (arm_deal_with_atomic_sequence_raw): Adjust. (thumb_get_next_pcs_raw): Adjust. (arm_get_next_pcs_raw): Adjust. (arm_get_next_pcs): Adjust. * arch/arm-get-next-pcs.h (arm_get_next_pcs): Adjust. * aarch64-tdep.c (aarch64_software_single_step): Adjust. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Adjust. (alpha_software_single_step): Adjust. * alpha-tdep.h (alpha_software_single_step): Adjust. * arm-linux-tdep.c (arm_linux_software_single_step): Adjust. * arm-tdep.c (arm_software_single_step): Adjust. (arm_breakpoint_kind_from_current_state): Adjust. * arm-tdep.h (arm_software_single_step): Adjust. * breakpoint.c (insert_single_step_breakpoint): Adjust. * cris-tdep.c (cris_software_single_step): Adjust. * mips-tdep.c (mips_deal_with_atomic_sequence): Adjust. (micromips_deal_with_atomic_sequence): Adjust. (deal_with_atomic_sequence): Adjust. (mips_software_single_step): Adjust. * mips-tdep.h (mips_software_single_step): Adjust. * moxie-tdep.c (moxie_software_single_step): Adjust. * nios2-tdep.c (nios2_software_single_step): Adjust. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * s390-linux-tdep.c (s390_software_single_step): Adjust. * sparc-tdep.c (sparc_software_single_step): Adjust. * spu-tdep.c (spu_software_single_step): Adjust. * tic6x-tdep.c (tic6x_software_single_step): Adjust. gdb/gdbserver/ChangeLog: * linux-arm-low.c (arm_gdbserver_get_next_pcs): Adjust to software_single_step change of return type to std::vector<CORE_ADDR>. * linux-low.c (install_software_single_step_breakpoints): Likewise. * linux-low.h (install_software_single_step_breakpoints): Likewise.
2017-05-03 01:30:07 +08:00
std::vector<CORE_ADDR>
Change gdbarch software_single_step frame_info to regcache This patch changes gdbarch method software_single_step's parameter from "struct frame_info *" to "struct regcache *, IOW, software_single_step starts to use current regcache rather than current frame for software single. gdb: 2016-11-22 Yao Qi <yao.qi@linaro.org> * gdbarch.sh (software_single_step): Change parameter from frame_info to regcache. * gdbarch.c, gdbarch.h: Regenerated. * aarch64-tdep.c (aarch64_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise. (alpha_software_single_step): Likewise. * alpha-tdep.h (alpha_software_single_step): Update declaration. * arm-linux-tdep.c (arm_linux_software_single_step): Likewise. * arm-tdep.c (arm_software_single_step): Likewise. * arm-tdep.h (arm_software_single_step): Likewise. * breakpoint.c (insert_single_step_breakpoint): Pass regcache to gdbarch_software_single_step. * cris-tdep.c (cris_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * mips-tdep.c (mips_software_single_step): Likewise. * mips-tdep.h (mips_software_single_step): Update declaration. * moxie-tdep.c (moxie_software_single_step): Likewise. * nios2-tdep.c (nios2_software_single_step): Likewise. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration. * rs6000-aix-tdep.c (rs6000_software_single_step): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * spu-tdep.c (spu_software_single_step): Likewise. * tic6x-tdep.c (tic6x_software_single_step): Likewise.
2016-11-22 22:05:06 +08:00
gdbarch_software_single_step (struct gdbarch *gdbarch, struct regcache *regcache)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->software_single_step != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_software_single_step called\n");
Change gdbarch software_single_step frame_info to regcache This patch changes gdbarch method software_single_step's parameter from "struct frame_info *" to "struct regcache *, IOW, software_single_step starts to use current regcache rather than current frame for software single. gdb: 2016-11-22 Yao Qi <yao.qi@linaro.org> * gdbarch.sh (software_single_step): Change parameter from frame_info to regcache. * gdbarch.c, gdbarch.h: Regenerated. * aarch64-tdep.c (aarch64_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise. (alpha_software_single_step): Likewise. * alpha-tdep.h (alpha_software_single_step): Update declaration. * arm-linux-tdep.c (arm_linux_software_single_step): Likewise. * arm-tdep.c (arm_software_single_step): Likewise. * arm-tdep.h (arm_software_single_step): Likewise. * breakpoint.c (insert_single_step_breakpoint): Pass regcache to gdbarch_software_single_step. * cris-tdep.c (cris_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * mips-tdep.c (mips_software_single_step): Likewise. * mips-tdep.h (mips_software_single_step): Update declaration. * moxie-tdep.c (moxie_software_single_step): Likewise. * nios2-tdep.c (nios2_software_single_step): Likewise. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration. * rs6000-aix-tdep.c (rs6000_software_single_step): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * spu-tdep.c (spu_software_single_step): Likewise. * tic6x-tdep.c (tic6x_software_single_step): Likewise.
2016-11-22 22:05:06 +08:00
return gdbarch->software_single_step (regcache);
}
void
set_gdbarch_software_single_step (struct gdbarch *gdbarch,
gdbarch_software_single_step_ftype software_single_step)
{
gdbarch->software_single_step = software_single_step;
}
int
gdbarch_single_step_through_delay_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->single_step_through_delay != NULL;
}
int
gdbarch_single_step_through_delay (struct gdbarch *gdbarch, struct frame_info *frame)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->single_step_through_delay != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_single_step_through_delay called\n");
return gdbarch->single_step_through_delay (gdbarch, frame);
}
void
set_gdbarch_single_step_through_delay (struct gdbarch *gdbarch,
gdbarch_single_step_through_delay_ftype single_step_through_delay)
{
gdbarch->single_step_through_delay = single_step_through_delay;
}
int
2003-09-04 Andrew Cagney <cagney@redhat.com> * avr-tdep.c: Include "dis-asm.h". * cris-tdep.c: Include "dis-asm.h". (cris_delayed_get_disassembler): Use "struct disassemble_info" instead of corresponding typedef. * h8300-tdep.c: Include "dis-asm.h". * ia64-tdep.c: Include "dis-asm.h". * i386-tdep.c: Include "dis-asm.h". (i386_print_insn): Use "struct disassemble_info" instead of corresponding typedef. * m68k-tdep.c: Include "dis-asm.h". * mcore-tdep.c: Include "dis-asm.h". * mips-tdep.c: Include "dis-asm.h". (gdb_print_insn_mips): Make static, use "struct disassemble_info" instead of corresponding typedef. * ns32k-tdep.c: Include "dis-asm.h". * s390-tdep.c: Include "dis-asm.h". * sparc-tdep.c: Include "dis-asm.h". * vax-tdep.c: Include "dis-asm.h". * v850-tdep.c: Include "dis-asm.h". * mn10300-tdep.c: Include "dis-asm.h". * rs6000-tdep.c: Include "dis-asm.h". * xstormy16-tdep.c: Include "dis-asm.h". (_initialize_xstormy16_tdep): Delete "extern" declaration of print_insn_xstormy16. * Makefile.in (v850-tdep.o): Update dependencies. (vax-tdep.o, sparc-tdep.o, s390-tdep.o): Ditto. (ns32k-tdep.o, mips-tdep.o, mcore-tdep.o): Ditto. (m68k-tdep.o, ia64-tdep.o, i386-tdep.o): Ditto. (h8300-tdep.o, cris-tdep.o, avr-tdep.o): Ditto. (mn10300-tdep.o, xstormy16-tdep.o, disasm.o): Ditto. (gdbarch_h): Remove $(dis_asm_h). * disasm.c: Include "dis-asm.h". (dis_asm_read_memory): Use "struct disassemble_info" instead of corresponding typedef. (dis_asm_memory_error, dump_insns, do_assembly_only): Ditto. (gdb_disassemble_info, gdb_disassembly, gdb_print_insn): Ditto. * gdbarch.sh: Do not include "dis-asm.h". (struct disassemble_info): Declare opaque. (TARGET_PRINT_INSN): Update declaration. * gdbarch.h, gdbarch.c: Re-generate.
2003-09-09 12:41:32 +08:00
gdbarch_print_insn (struct gdbarch *gdbarch, bfd_vma vma, struct disassemble_info *info)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->print_insn != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_print_insn called\n");
return gdbarch->print_insn (vma, info);
}
void
set_gdbarch_print_insn (struct gdbarch *gdbarch,
gdbarch_print_insn_ftype print_insn)
{
gdbarch->print_insn = print_insn;
}
CORE_ADDR
* gdbarch.sh (skip_trampoline_code): Add FRAME argument. * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.c (generic_skip_trampoline_code): Add FRAME argument. * arch-utils.h (generic_skip_trampoline_code): Likewise. * infrun.c (handle_inferior_event): Pass current frame to gdbarch_skip_trampoline_code and skip_language_trampoline. * language.c (unk_lang_trampoline): Add FRAME argument. (skip_language_trampoline): Add FRAME argument. Pass it to skip_trampoline callback. * language.h: Add forward declaration of struct frame_info. (struct language_defn): Add FRAME argument to skip_trampoline. (skip_language_trampoline): Add FRAME argument. * cp-abi.c (cplus_skip_trampoline): Add FRAME argument. Pass it to skip_trampoline callback. * cp-abi.h: Add forward declaration of struct frame_info. (cplus_skip_trampoline): Add FRAME argument. (struct cp_abi_ops): Add FRAME argument to skip_trampoline callback. * gnu-v3-abi.c (gnuv3_skip_trampoline): Add FRAME argument. Pass it to gdbarch_skip_trampoline_code. * objc-lang.c (objc_skip_trampoline): Add FRAME argument. Pass it to gdbarch_skip_trampoline_code. * minsyms.c (find_solib_trampoline_target): Add FRAME argument. * symtab.h (find_solib_trampoline_target): Likewise. * obsd-tdep.c (obsd_skip_solib_resolver): Pass current frame to find_solib_trampoline_target. * arm-tdep.c (arm_skip_stub): Add FRAME argument. Read registers from FRAME instead of calling read_register. * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Add FRAME argument. Read registers from FRAME instead of using read_register. * hppa-tdep.c (hppa_skip_trampoline_code): Likewise. * hppa-tdep.h (hppa_skip_trampoline_code): Add FRAME argument. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Add FRAME argument. * m32c-tdep.c (m32c_skip_trampoline_code): Add FRAME argument. * mips-tdep.c (mips_skip_trampoline_code): Add FRAME argument. Read registers from FRAME instead of using read_signed_register. * ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Add FRAME argument. (ppc64_standard_linkage_target): Likewise. Read registers from FRAME instead of using read_register. (ppc64_skip_trampoline_code): Add FRAME argument. Pass it to ppc64_standard_linkage_target. * rs6000-tdep.c (rs6000_skip_trampoline_code): Add FRAME argument. Pass it to find_solib_trampoline_target. Read registers from FRAME instead of using read_register. * xstormy16-tdep.c (xstormy16_skip_trampoline_code): Add FRAME argument.
2007-06-16 06:39:52 +08:00
gdbarch_skip_trampoline_code (struct gdbarch *gdbarch, struct frame_info *frame, CORE_ADDR pc)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->skip_trampoline_code != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_skip_trampoline_code called\n");
* gdbarch.sh (skip_trampoline_code): Add FRAME argument. * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.c (generic_skip_trampoline_code): Add FRAME argument. * arch-utils.h (generic_skip_trampoline_code): Likewise. * infrun.c (handle_inferior_event): Pass current frame to gdbarch_skip_trampoline_code and skip_language_trampoline. * language.c (unk_lang_trampoline): Add FRAME argument. (skip_language_trampoline): Add FRAME argument. Pass it to skip_trampoline callback. * language.h: Add forward declaration of struct frame_info. (struct language_defn): Add FRAME argument to skip_trampoline. (skip_language_trampoline): Add FRAME argument. * cp-abi.c (cplus_skip_trampoline): Add FRAME argument. Pass it to skip_trampoline callback. * cp-abi.h: Add forward declaration of struct frame_info. (cplus_skip_trampoline): Add FRAME argument. (struct cp_abi_ops): Add FRAME argument to skip_trampoline callback. * gnu-v3-abi.c (gnuv3_skip_trampoline): Add FRAME argument. Pass it to gdbarch_skip_trampoline_code. * objc-lang.c (objc_skip_trampoline): Add FRAME argument. Pass it to gdbarch_skip_trampoline_code. * minsyms.c (find_solib_trampoline_target): Add FRAME argument. * symtab.h (find_solib_trampoline_target): Likewise. * obsd-tdep.c (obsd_skip_solib_resolver): Pass current frame to find_solib_trampoline_target. * arm-tdep.c (arm_skip_stub): Add FRAME argument. Read registers from FRAME instead of calling read_register. * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Add FRAME argument. Read registers from FRAME instead of using read_register. * hppa-tdep.c (hppa_skip_trampoline_code): Likewise. * hppa-tdep.h (hppa_skip_trampoline_code): Add FRAME argument. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Add FRAME argument. * m32c-tdep.c (m32c_skip_trampoline_code): Add FRAME argument. * mips-tdep.c (mips_skip_trampoline_code): Add FRAME argument. Read registers from FRAME instead of using read_signed_register. * ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Add FRAME argument. (ppc64_standard_linkage_target): Likewise. Read registers from FRAME instead of using read_register. (ppc64_skip_trampoline_code): Add FRAME argument. Pass it to ppc64_standard_linkage_target. * rs6000-tdep.c (rs6000_skip_trampoline_code): Add FRAME argument. Pass it to find_solib_trampoline_target. Read registers from FRAME instead of using read_register. * xstormy16-tdep.c (xstormy16_skip_trampoline_code): Add FRAME argument.
2007-06-16 06:39:52 +08:00
return gdbarch->skip_trampoline_code (frame, pc);
}
void
set_gdbarch_skip_trampoline_code (struct gdbarch *gdbarch,
gdbarch_skip_trampoline_code_ftype skip_trampoline_code)
{
gdbarch->skip_trampoline_code = skip_trampoline_code;
}
CORE_ADDR
gdbarch_skip_solib_resolver (struct gdbarch *gdbarch, CORE_ADDR pc)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->skip_solib_resolver != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_skip_solib_resolver called\n");
return gdbarch->skip_solib_resolver (gdbarch, pc);
}
void
set_gdbarch_skip_solib_resolver (struct gdbarch *gdbarch,
gdbarch_skip_solib_resolver_ftype skip_solib_resolver)
{
gdbarch->skip_solib_resolver = skip_solib_resolver;
}
int
* blockframe.c (find_pc_partial_function_gnu_ifunc): Change type of "name" parameter to const char ** from char **. All callers updated. (find_pc_partial_function): Ditto. (cache_pc_function_name): Change type to const char * from char *. * symtab.h ((find_pc_partial_function_gnu_ifunc): Update. (find_pc_partial_function): Update. * alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change type of "name" parameter to const char * from char *. All uses updated. * arch-utils.c (generic_in_solib_return_trampoline): Change type of "name" parameter to const char * from char *. * arch-utils.h (generic_in_solib_return_trampoline): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change type of "name" parameter to const char * from char *. * gdbarch.sh (in_solib_return_trampoline): Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update. * m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change type of "name" parameter to const char * from char *. * skip.c (skip_function_pc): Ditto. * sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto. * sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update. * sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto. * sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto. * sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto. * sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto. * sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto. * nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name". * nbsd-tdep.h (nbsd_pc_in_sigtramp): Update.
2012-02-03 04:19:17 +08:00
gdbarch_in_solib_return_trampoline (struct gdbarch *gdbarch, CORE_ADDR pc, const char *name)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->in_solib_return_trampoline != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_in_solib_return_trampoline called\n");
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-03 01:25:59 +08:00
return gdbarch->in_solib_return_trampoline (gdbarch, pc, name);
}
void
set_gdbarch_in_solib_return_trampoline (struct gdbarch *gdbarch,
gdbarch_in_solib_return_trampoline_ftype in_solib_return_trampoline)
{
gdbarch->in_solib_return_trampoline = in_solib_return_trampoline;
}
infrun: step through indirect branch thunks With version 7.3 GCC supports new options -mindirect-branch=<choice> -mfunction-return=<choice> The choices are: keep behaves as before thunk jumps through a thunk thunk-external jumps through an external thunk thunk-inline jumps through an inlined thunk For thunk and thunk-external, GDB would, on a call to the thunk, step into the thunk and then resume to its caller assuming that this is an undebuggable function. On a return thunk, GDB would stop inside the thunk. Make GDB step through such thunks instead. Before: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) 30 } After: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) inc (x=41) at gdb.base/step-indirect-call-thunk.c:23 23 return x + 1; This is independent of the step-mode. In order to step into the thunk, you would need to use stepi. When stepping over an indirect call thunk, GDB would first step through the thunk, then recognize that it stepped into a sub-routine and resume to the caller (of the thunk). Not sure whether this is worth optimizing. Thunk detection is implemented via gdbarch. I implemented the methods for IA. Other architectures may run into unexpected fails. The tests assume a fixed number of instruction steps to reach a thunk. This depends on the compiler as well as the architecture. They may need adjustments when we add support for more architectures. Or we can simply drop those tests that cover being able to step into thunks using instruction stepping. When using an older GCC, the tests will fail to build and will be reported as untested: Running .../gdb.base/step-indirect-call-thunk.exp ... gdb compile failed, \ gcc: error: unrecognized command line option '-mindirect-branch=thunk' gcc: error: unrecognized command line option '-mfunction-return=thunk' === gdb Summary === # of untested testcases 1 gdb/ * infrun.c (process_event_stop_test): Call gdbarch_in_indirect_branch_thunk. * gdbarch.sh (in_indirect_branch_thunk): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * x86-tdep.h: New. * x86-tdep.c: New. * Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o. (HFILES_NO_SRCDIR): Add x86-tdep.h. (ALLDEPFILES): Add x86-tdep.c. * arch-utils.h (default_in_indirect_branch_thunk): New. * arch-utils.c (default_in_indirect_branch_thunk): New. * i386-tdep: Include x86-tdep.h. (i386_in_indirect_branch_thunk): New. (i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch function. * amd64-tdep: Include x86-tdep.h. (amd64_in_indirect_branch_thunk): New. (amd64_init_abi): Set in_indirect_branch_thunk gdbarch function. testsuite/ * gdb.base/step-indirect-call-thunk.exp: New. * gdb.base/step-indirect-call-thunk.c: New. * gdb.reverse/step-indirect-call-thunk.exp: New. * gdb.reverse/step-indirect-call-thunk.c: New.
2018-02-14 21:30:57 +08:00
bool
gdbarch_in_indirect_branch_thunk (struct gdbarch *gdbarch, CORE_ADDR pc)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->in_indirect_branch_thunk != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_in_indirect_branch_thunk called\n");
return gdbarch->in_indirect_branch_thunk (gdbarch, pc);
}
void
set_gdbarch_in_indirect_branch_thunk (struct gdbarch *gdbarch,
gdbarch_in_indirect_branch_thunk_ftype in_indirect_branch_thunk)
{
gdbarch->in_indirect_branch_thunk = in_indirect_branch_thunk;
}
int
gdbarch_stack_frame_destroyed_p (struct gdbarch *gdbarch, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->stack_frame_destroyed_p != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_stack_frame_destroyed_p called\n");
return gdbarch->stack_frame_destroyed_p (gdbarch, addr);
}
void
set_gdbarch_stack_frame_destroyed_p (struct gdbarch *gdbarch,
gdbarch_stack_frame_destroyed_p_ftype stack_frame_destroyed_p)
{
gdbarch->stack_frame_destroyed_p = stack_frame_destroyed_p;
}
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
int
gdbarch_elf_make_msymbol_special_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->elf_make_msymbol_special != NULL;
}
void
gdbarch_elf_make_msymbol_special (struct gdbarch *gdbarch, asymbol *sym, struct minimal_symbol *msym)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->elf_make_msymbol_special != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_elf_make_msymbol_special called\n");
gdbarch->elf_make_msymbol_special (sym, msym);
}
void
set_gdbarch_elf_make_msymbol_special (struct gdbarch *gdbarch,
gdbarch_elf_make_msymbol_special_ftype elf_make_msymbol_special)
{
gdbarch->elf_make_msymbol_special = elf_make_msymbol_special;
}
void
gdbarch_coff_make_msymbol_special (struct gdbarch *gdbarch, int val, struct minimal_symbol *msym)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->coff_make_msymbol_special != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_coff_make_msymbol_special called\n");
gdbarch->coff_make_msymbol_special (val, msym);
}
void
set_gdbarch_coff_make_msymbol_special (struct gdbarch *gdbarch,
gdbarch_coff_make_msymbol_special_ftype coff_make_msymbol_special)
{
gdbarch->coff_make_msymbol_special = coff_make_msymbol_special;
}
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 21:31:53 +08:00
void
gdbarch_make_symbol_special (struct gdbarch *gdbarch, struct symbol *sym, struct objfile *objfile)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->make_symbol_special != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_make_symbol_special called\n");
gdbarch->make_symbol_special (sym, objfile);
}
void
set_gdbarch_make_symbol_special (struct gdbarch *gdbarch,
gdbarch_make_symbol_special_ftype make_symbol_special)
{
gdbarch->make_symbol_special = make_symbol_special;
}
CORE_ADDR
gdbarch_adjust_dwarf2_addr (struct gdbarch *gdbarch, CORE_ADDR pc)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->adjust_dwarf2_addr != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_adjust_dwarf2_addr called\n");
return gdbarch->adjust_dwarf2_addr (pc);
}
void
set_gdbarch_adjust_dwarf2_addr (struct gdbarch *gdbarch,
gdbarch_adjust_dwarf2_addr_ftype adjust_dwarf2_addr)
{
gdbarch->adjust_dwarf2_addr = adjust_dwarf2_addr;
}
CORE_ADDR
gdbarch_adjust_dwarf2_line (struct gdbarch *gdbarch, CORE_ADDR addr, int rel)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->adjust_dwarf2_line != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_adjust_dwarf2_line called\n");
return gdbarch->adjust_dwarf2_line (addr, rel);
}
void
set_gdbarch_adjust_dwarf2_line (struct gdbarch *gdbarch,
gdbarch_adjust_dwarf2_line_ftype adjust_dwarf2_line)
{
gdbarch->adjust_dwarf2_line = adjust_dwarf2_line;
}
int
gdbarch_cannot_step_breakpoint (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of cannot_step_breakpoint, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_cannot_step_breakpoint called\n");
return gdbarch->cannot_step_breakpoint;
}
void
set_gdbarch_cannot_step_breakpoint (struct gdbarch *gdbarch,
int cannot_step_breakpoint)
{
gdbarch->cannot_step_breakpoint = cannot_step_breakpoint;
}
int
gdbarch_have_nonsteppable_watchpoint (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of have_nonsteppable_watchpoint, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_have_nonsteppable_watchpoint called\n");
return gdbarch->have_nonsteppable_watchpoint;
}
void
set_gdbarch_have_nonsteppable_watchpoint (struct gdbarch *gdbarch,
int have_nonsteppable_watchpoint)
{
gdbarch->have_nonsteppable_watchpoint = have_nonsteppable_watchpoint;
}
2002-10-17 04:50:22 +08:00
int
gdbarch_address_class_type_flags_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->address_class_type_flags != NULL;
2002-10-17 04:50:22 +08:00
}
int
gdbarch_address_class_type_flags (struct gdbarch *gdbarch, int byte_size, int dwarf2_addr_class)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->address_class_type_flags != NULL);
2002-10-17 04:50:22 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_address_class_type_flags called\n");
return gdbarch->address_class_type_flags (byte_size, dwarf2_addr_class);
}
void
set_gdbarch_address_class_type_flags (struct gdbarch *gdbarch,
gdbarch_address_class_type_flags_ftype address_class_type_flags)
{
gdbarch->address_class_type_flags = address_class_type_flags;
}
int
gdbarch_address_class_type_flags_to_name_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->address_class_type_flags_to_name != NULL;
2002-10-17 04:50:22 +08:00
}
const char *
2002-10-17 04:50:22 +08:00
gdbarch_address_class_type_flags_to_name (struct gdbarch *gdbarch, int type_flags)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->address_class_type_flags_to_name != NULL);
2002-10-17 04:50:22 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_address_class_type_flags_to_name called\n");
return gdbarch->address_class_type_flags_to_name (gdbarch, type_flags);
2002-10-17 04:50:22 +08:00
}
void
set_gdbarch_address_class_type_flags_to_name (struct gdbarch *gdbarch,
gdbarch_address_class_type_flags_to_name_ftype address_class_type_flags_to_name)
{
gdbarch->address_class_type_flags_to_name = address_class_type_flags_to_name;
}
[gdbarch] New method "execute_dwarf_cfa_vendor_op" and migrate SPARC to it Recently a feature called "return address signing" has been added to GCC to prevent stack smash stack on AArch64. For details please refer: https://gcc.gnu.org/ml/gcc-patches/2017-01/msg00376.html GDB needs to be aware of this feature so it can restore the original return address which is critical for unwinding. On compiler side, whenever return address, i.e. LR register, is mangled or restored by hardware instruction, compiler is expected to generate a DW_CFA_AARCH64_negate_ra_state to toggle return address signing status. DW_CFA_AARCH64_negate_ra_state is using the same CFI number and therefore need to be multiplexed with DW_CFA_GNU_window_save which was designed for SPARC. A new gdbarch method "execute_dwarf_cfa_vendor_op" is introduced by this patch. It's parameters has been restricted to those only needed by SPARC and AArch64 for multiplexing DW_CFA_GNU_window_save which is a CFI operation takes none operand. Should any further DWARF CFI operation want to be multiplexed in the future, the parameter list can be extended. Below is the current function prototype. typedef int (gdbarch_execute_dwarf_cfa_vendor_op_ftype) (struct gdbarch *gdbarch, gdb_byte op, struct dwarf2_frame_state *fs); DW_CFA_GNU_window_save support for SPARC is migrated to this new gdbarch method by this patch. gdb/ * gdbarch.sh: New gdbarch method execute_dwarf_cfa_vendor_op. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * dwarf2-frame.c (dwarf2_frame_state_alloc_regs): Made the visibility external. (execute_cfa_program): Call execute_dwarf_cfa_vendor_op for CFI between DW_CFA_lo_user and DW_CFA_high_user inclusive. (enum cfa_how_kind): Move to ... (struct dwarf2_frame_state_reg_info): Likewise. (struct dwarf2_frame_state): Likewise. * dwarf2-frame.h: ... here. (dwarf2_frame_state_alloc_regs): New declaration. * sparc-tdep.c (sparc_execute_dwarf_cfa_vendor_op): New function. (sparc32_gdbarch_init): Register execute_dwarf_cfa_vendor_op hook.
2017-04-26 21:05:03 +08:00
bool
gdbarch_execute_dwarf_cfa_vendor_op (struct gdbarch *gdbarch, gdb_byte op, struct dwarf2_frame_state *fs)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->execute_dwarf_cfa_vendor_op != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_execute_dwarf_cfa_vendor_op called\n");
return gdbarch->execute_dwarf_cfa_vendor_op (gdbarch, op, fs);
}
void
set_gdbarch_execute_dwarf_cfa_vendor_op (struct gdbarch *gdbarch,
gdbarch_execute_dwarf_cfa_vendor_op_ftype execute_dwarf_cfa_vendor_op)
{
gdbarch->execute_dwarf_cfa_vendor_op = execute_dwarf_cfa_vendor_op;
}
2002-10-17 04:50:22 +08:00
int
gdbarch_address_class_name_to_type_flags_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->address_class_name_to_type_flags != NULL;
2002-10-17 04:50:22 +08:00
}
int
gdbarch_address_class_name_to_type_flags (struct gdbarch *gdbarch, const char *name, int *type_flags_ptr)
2002-10-17 04:50:22 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->address_class_name_to_type_flags != NULL);
2002-10-17 04:50:22 +08:00
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_address_class_name_to_type_flags called\n");
return gdbarch->address_class_name_to_type_flags (gdbarch, name, type_flags_ptr);
2002-10-17 04:50:22 +08:00
}
void
set_gdbarch_address_class_name_to_type_flags (struct gdbarch *gdbarch,
gdbarch_address_class_name_to_type_flags_ftype address_class_name_to_type_flags)
{
gdbarch->address_class_name_to_type_flags = address_class_name_to_type_flags;
}
int
gdbarch_register_reggroup_p (struct gdbarch *gdbarch, int regnum, struct reggroup *reggroup)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->register_reggroup_p != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_register_reggroup_p called\n");
return gdbarch->register_reggroup_p (gdbarch, regnum, reggroup);
}
void
set_gdbarch_register_reggroup_p (struct gdbarch *gdbarch,
gdbarch_register_reggroup_p_ftype register_reggroup_p)
{
gdbarch->register_reggroup_p = register_reggroup_p;
}
int
gdbarch_fetch_pointer_argument_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->fetch_pointer_argument != NULL;
}
CORE_ADDR
gdbarch_fetch_pointer_argument (struct gdbarch *gdbarch, struct frame_info *frame, int argi, struct type *type)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->fetch_pointer_argument != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_fetch_pointer_argument called\n");
return gdbarch->fetch_pointer_argument (frame, argi, type);
}
void
set_gdbarch_fetch_pointer_argument (struct gdbarch *gdbarch,
gdbarch_fetch_pointer_argument_ftype fetch_pointer_argument)
{
gdbarch->fetch_pointer_argument = fetch_pointer_argument;
}
Replace 'core_regset_sections' by iterator method The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator.
2014-09-04 23:26:43 +08:00
int
gdbarch_iterate_over_regset_sections_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->iterate_over_regset_sections != NULL;
}
void
gdbarch_iterate_over_regset_sections (struct gdbarch *gdbarch, iterate_over_regset_sections_cb *cb, void *cb_data, const struct regcache *regcache)
{
gdb_assert (gdbarch != NULL);
Replace 'core_regset_sections' by iterator method The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator.
2014-09-04 23:26:43 +08:00
gdb_assert (gdbarch->iterate_over_regset_sections != NULL);
if (gdbarch_debug >= 2)
Replace 'core_regset_sections' by iterator method The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator.
2014-09-04 23:26:43 +08:00
fprintf_unfiltered (gdb_stdlog, "gdbarch_iterate_over_regset_sections called\n");
gdbarch->iterate_over_regset_sections (gdbarch, cb, cb_data, regcache);
}
void
Replace 'core_regset_sections' by iterator method The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator.
2014-09-04 23:26:43 +08:00
set_gdbarch_iterate_over_regset_sections (struct gdbarch *gdbarch,
gdbarch_iterate_over_regset_sections_ftype iterate_over_regset_sections)
{
Replace 'core_regset_sections' by iterator method The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator.
2014-09-04 23:26:43 +08:00
gdbarch->iterate_over_regset_sections = iterate_over_regset_sections;
}
* gdbarch.sh (make_corefile_notes): New architecture callback. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes before target_make_corefile_notes. If NULL is returned, the target does not support core file generation. * linux-nat.c: Include "linux-tdep.h". (find_signalled_thread, find_stop_signal): Remove. (linux_nat_do_thread_registers): Likewise. (struct linux_nat_corefile_thread_data): Likewise. (linux_nat_corefile_thread_callback): Likewise. (iterate_over_spus): Likewise. (struct linux_spu_corefile_data): Likewise. (linux_spu_corefile_callback): Likewise. (linux_spu_make_corefile_notes): Likewise. (linux_nat_collect_thread_registers): New function. (linux_nat_make_corefile_notes): Replace contents by call to linux_make_corefile_notes passing linux_nat_collect_thread_registers as native-only callback. * linux-tdep.h: Include "bfd.h". (struct regcache): Add forward declaration. (linux_collect_thread_registers_ftype): New typedef. (linux_make_corefile_notes): Add prototype. * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h", "regset.h", and "elf-bfd.h". (find_signalled_thread, find_stop_signal): New functions. (linux_spu_make_corefile_notes): Likewise. (linux_collect_thread_registers): Likewise. (struct linux_corefile_thread_data): New data structure. (linux_corefile_thread_callback): New funcion. (linux_make_corefile_notes): Likewise. (linux_make_corefile_notes_1): Likewise. (linux_init_abi): Install it.
2012-01-20 17:56:56 +08:00
int
gdbarch_make_corefile_notes_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->make_corefile_notes != NULL;
}
char *
gdbarch_make_corefile_notes (struct gdbarch *gdbarch, bfd *obfd, int *note_size)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->make_corefile_notes != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_make_corefile_notes called\n");
return gdbarch->make_corefile_notes (gdbarch, obfd, note_size);
}
void
set_gdbarch_make_corefile_notes (struct gdbarch *gdbarch,
gdbarch_make_corefile_notes_ftype make_corefile_notes)
{
gdbarch->make_corefile_notes = make_corefile_notes;
}
int
gdbarch_find_memory_regions_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->find_memory_regions != NULL;
}
int
gdbarch_find_memory_regions (struct gdbarch *gdbarch, find_memory_region_ftype func, void *data)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->find_memory_regions != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_find_memory_regions called\n");
return gdbarch->find_memory_regions (gdbarch, func, data);
}
void
set_gdbarch_find_memory_regions (struct gdbarch *gdbarch,
gdbarch_find_memory_regions_ftype find_memory_regions)
{
gdbarch->find_memory_regions = find_memory_regions;
}
int
gdbarch_core_xfer_shared_libraries_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->core_xfer_shared_libraries != NULL;
}
ULONGEST
gdbarch_core_xfer_shared_libraries (struct gdbarch *gdbarch, gdb_byte *readbuf, ULONGEST offset, ULONGEST len)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->core_xfer_shared_libraries != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_core_xfer_shared_libraries called\n");
return gdbarch->core_xfer_shared_libraries (gdbarch, readbuf, offset, len);
}
void
set_gdbarch_core_xfer_shared_libraries (struct gdbarch *gdbarch,
gdbarch_core_xfer_shared_libraries_ftype core_xfer_shared_libraries)
{
gdbarch->core_xfer_shared_libraries = core_xfer_shared_libraries;
}
ppc-aix core file relocation. The current code attempts to provide relocation support when debugging core files via the rs6000_xfer_partial method of the rs6000-nat target_ops vector. However, this target_ops vector does not get pushed on the target stack at all when debugging core files, thus bypassing completely that part of the code. This patch fixes the problem by extending corelow's core_xfer_partial into handling the TARGET_OBJECT_LIBRARIES_AIX object. gdb/ChangeLog: * gdbarch.sh (core_xfer_shared_libraries_aix): New method. * gdbarch.h, gdbarch.c: Regenerate. * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX handling. * rs6000-aix-tdep.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h. * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and "xml-utils.h". (struct field_info, struct ld_info_desc): New types. (ld_info32_desc, ld_info64_desc): New static constants. (struct ld_info): New type. (rs6000_aix_extract_ld_info): New function. (rs6000_aix_shared_library_to_xml): Likewise. (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. (rs6000_aix_init_osabi): Add call to set_gdbarch_core_xfer_shared_libraries_aix. * rs6000-nat.c: Add "rs6000-aix-tdep.h" include. Remove "xml-utils.h" include. (LdInfo): Delete typedef. (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME): Delete macros. (rs6000_ptrace_ldinfo): Change return type to gdb_byte *. Adjust code accordingly. (rs6000_core_ldinfo): Delete, folded into rs6000_aix_core_xfer_shared_libraries_aix. (rs6000_xfer_shared_library): Delete. (rs6000_xfer_shared_libraries): Reimplement.
2013-05-15 20:26:14 +08:00
int
gdbarch_core_xfer_shared_libraries_aix_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->core_xfer_shared_libraries_aix != NULL;
}
ULONGEST
gdbarch_core_xfer_shared_libraries_aix (struct gdbarch *gdbarch, gdb_byte *readbuf, ULONGEST offset, ULONGEST len)
ppc-aix core file relocation. The current code attempts to provide relocation support when debugging core files via the rs6000_xfer_partial method of the rs6000-nat target_ops vector. However, this target_ops vector does not get pushed on the target stack at all when debugging core files, thus bypassing completely that part of the code. This patch fixes the problem by extending corelow's core_xfer_partial into handling the TARGET_OBJECT_LIBRARIES_AIX object. gdb/ChangeLog: * gdbarch.sh (core_xfer_shared_libraries_aix): New method. * gdbarch.h, gdbarch.c: Regenerate. * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX handling. * rs6000-aix-tdep.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h. * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and "xml-utils.h". (struct field_info, struct ld_info_desc): New types. (ld_info32_desc, ld_info64_desc): New static constants. (struct ld_info): New type. (rs6000_aix_extract_ld_info): New function. (rs6000_aix_shared_library_to_xml): Likewise. (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. (rs6000_aix_init_osabi): Add call to set_gdbarch_core_xfer_shared_libraries_aix. * rs6000-nat.c: Add "rs6000-aix-tdep.h" include. Remove "xml-utils.h" include. (LdInfo): Delete typedef. (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME): Delete macros. (rs6000_ptrace_ldinfo): Change return type to gdb_byte *. Adjust code accordingly. (rs6000_core_ldinfo): Delete, folded into rs6000_aix_core_xfer_shared_libraries_aix. (rs6000_xfer_shared_library): Delete. (rs6000_xfer_shared_libraries): Reimplement.
2013-05-15 20:26:14 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->core_xfer_shared_libraries_aix != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_core_xfer_shared_libraries_aix called\n");
return gdbarch->core_xfer_shared_libraries_aix (gdbarch, readbuf, offset, len);
}
void
set_gdbarch_core_xfer_shared_libraries_aix (struct gdbarch *gdbarch,
gdbarch_core_xfer_shared_libraries_aix_ftype core_xfer_shared_libraries_aix)
{
gdbarch->core_xfer_shared_libraries_aix = core_xfer_shared_libraries_aix;
}
* corelow.c (get_core_registers): Adjust. (core_file_thread_alive): Rename to... (core_thread_alive): ... this. (core_pid_to_str): Try gdbarch_core_pid_to_str first. (init_core_ops): Adjust. (coreops_suppress_target): Delete. (_initialize_corelow): Unconditionally add core_ops. * procfs.c: Include "inf-child.h". (procfs_ops): Delete. (init_procfs_ops): Delete. Reimplement as... (procfs_target): ... this, inheriting from inf-child. (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust. (procfs_prepare_to_store): Delete. (procfs_store_registers, procfs_resume): Adjust. (procfs_open): Delete. (procfs_suppress_run): Delete. (procfs_can_run): Delete. (procfs_mourn_inferior): Adjust. (procfs_init_inferior): Add target_ops parameter. Adjust. (procfs_create_inferior): Don't pass procfs_init_inferior to fork_inferior. Instead call it after fork_inferior returns. (procfs_find_new_threads): Adjust. (_initialize_procfs): Adjust to use procfs_target instead of init_procfs_ops. * sol-thread.c (orig_core_ops, sol_core_ops): Delete. (lwp_to_thread): Use target_thread_alive. (sol_thread_open): Delete. (sol_thread_attach): Delete. (sol_thread_detach, sol_thread_resume, sol_thread_wait) (sol_thread_fetch_registers, sol_thread_store_registers): Adjust to use find_target_beneath. (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete. (sol_thread_xfer_partial): Adjust to use find_target_beneath. (sol_thread_files_info, sol_thread_kill_inferior): Delete. (check_for_thread_db): New. (sol_thread_notice_signals, sol_thread_create_inferior): Delete. (sol_thread_new_objfile): Call check_for_thread_db. (sol_thread_mourn_inferior): Adjust to use find_target_beneath. (sol_thread_can_run): Delete. (sol_thread_alive): Adjust to use find_target_beneath. (sol_thread_stop): Delete. (rw_common): Use target_write_memory or target_read_memory. (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers. (ps_lsetregs, ps_lsetfpregs): Use target_store_registers. (solaris_pid_to_str): Remove check for libthread_db initialization failing. (sol_find_new_threads): Remove check for libthread_db initialization failing, or for an invalid inferior_ptid. Adjust to use find_target_beneath. (sol_core_open, sol_core_close, sol_core_detach, sol_core_files_info, sol_find_memory_regions, sol_make_note_section, ignore): Delete. (init_sol_thread_ops): Make it a thread_stratum target. Remove unneeded callback settings. (init_sol_core_ops): Delete. (_initialize_sol_thread): No longer call init_sol_core_ops, set procfs_suppress_run, or hack with core_ops. * target.h (struct target_ops): Add a target_ops * parameter to to_resume, to_fetch_registers, to_store_registers, to_thread_alive and to_find_new_threads. (target_fetch_registers, target_store_registers) (target_thread_alive, target_find_new_threads): Redeclare as function. * target.c (update_current_target): Do not inherit or de_fault to_resume, to_fetch_registers, to_store_registers, to_thread_alive, to_find_new_threads. (target_resume): Adjust. (target_thread_alive, target_find_new_threads): New. (debug_to_resume, debug_to_fetch_registers): Delete. (target_fetch_registers): New. (debug_to_store_registers): Delete. (target_store_registers): New. (debug_to_thread_alive, debug_to_find_new_threads): Delete. (setup_target_debug): Adjust. * gdbcore.h (core_ops): Delete declaration. * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c, inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c, i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c, hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c, nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c, alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c, bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c, hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c, ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c, m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c, mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c, ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c, shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c, vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes. * gdbarch.sh (core_pid_to_str): New gdbarch callback. * gdbarch.h, gdbarch.c: Regenerate. * sol2-tdep.c: Include "inferior.h". (sol2_core_pid_to_str): New. * sol2-tdep.h (sol2_core_pid_to_str): Declare. * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it. * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-23 08:03:50 +08:00
int
gdbarch_core_pid_to_str_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->core_pid_to_str != NULL;
}
-Wwrite-strings: Constify target_pid_to_str and target_thread_extra_thread_info -Wwrite-strings flagged a missing cast for example here: static char * ravenscar_extra_thread_info (struct target_ops *self, struct thread_info *tp) { return "Ravenscar task"; Since callers are not supposed to free the string returned by these methods, change the methods' signature to return const strings. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * aix-thread.c (aix_thread_pid_to_str) (aix_thread_extra_thread_info): Constify. * bsd-kvm.c (bsd_kvm_pid_to_str): Constify. * bsd-uthread.c (bsd_uthread_extra_thread_info) (bsd_uthread_pid_to_str): Constify. * corelow.c (core_pid_to_str): Constify. * darwin-nat.c (darwin_pid_to_str): Constify. * fbsd-nat.c (fbsd_pid_to_str): Constify. * fbsd-tdep.c (fbsd_core_pid_to_str, gdbarch_core_pid_to_str): Constify. * gnu-nat.c (gnu_pid_to_str): Constify. * go32-nat.c (go32_pid_to_str): Constify. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Constify. * inf-ptrace.c (inf_ptrace_pid_to_str): Constify. * inferior.c (inferior_pid_to_str): Constify. * linux-nat.c (linux_nat_pid_to_str): Constify. * linux-tdep.c (linux_core_pid_to_str): Constify. * linux-thread-db.c (thread_db_pid_to_str) (thread_db_extra_thread_info): Constify. * nto-tdep.c (nto_extra_thread_info): Constify. * nto-tdep.h (nto_extra_thread_info): Constify. * obsd-nat.c (obsd_pid_to_str): Constify. * procfs.c (procfs_pid_to_str): Constify. * ravenscar-thread.c (ravenscar_extra_thread_info) (ravenscar_pid_to_str): Constify. * remote-sim.c (gdbsim_pid_to_str): Constify. * remote.c (remote_threads_extra_info, remote_pid_to_str): Constify. * sol-thread.c (solaris_pid_to_str): Constify. * sol2-tdep.c (sol2_core_pid_to_str): Constify. * sol2-tdep.h (sol2_core_pid_to_str): Constify. * target.c (default_pid_to_str, target_pid_to_str) (normal_pid_to_str, default_pid_to_str): Constify. * target.h (target_ops::to_pid_to_str) (target_ops::to_extra_thread_info): Constify. (target_pid_to_str, normal_pid_to_str): Constify. * windows-nat.c (windows_pid_to_str): Constify. * gdbarch.sh (core_pid_to_str): Constify. * target-delegates.c: Regenerate. * gdbarch.h, gdbarch.c: Regenerate.
2017-04-06 02:21:34 +08:00
const char *
* corelow.c (get_core_registers): Adjust. (core_file_thread_alive): Rename to... (core_thread_alive): ... this. (core_pid_to_str): Try gdbarch_core_pid_to_str first. (init_core_ops): Adjust. (coreops_suppress_target): Delete. (_initialize_corelow): Unconditionally add core_ops. * procfs.c: Include "inf-child.h". (procfs_ops): Delete. (init_procfs_ops): Delete. Reimplement as... (procfs_target): ... this, inheriting from inf-child. (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust. (procfs_prepare_to_store): Delete. (procfs_store_registers, procfs_resume): Adjust. (procfs_open): Delete. (procfs_suppress_run): Delete. (procfs_can_run): Delete. (procfs_mourn_inferior): Adjust. (procfs_init_inferior): Add target_ops parameter. Adjust. (procfs_create_inferior): Don't pass procfs_init_inferior to fork_inferior. Instead call it after fork_inferior returns. (procfs_find_new_threads): Adjust. (_initialize_procfs): Adjust to use procfs_target instead of init_procfs_ops. * sol-thread.c (orig_core_ops, sol_core_ops): Delete. (lwp_to_thread): Use target_thread_alive. (sol_thread_open): Delete. (sol_thread_attach): Delete. (sol_thread_detach, sol_thread_resume, sol_thread_wait) (sol_thread_fetch_registers, sol_thread_store_registers): Adjust to use find_target_beneath. (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete. (sol_thread_xfer_partial): Adjust to use find_target_beneath. (sol_thread_files_info, sol_thread_kill_inferior): Delete. (check_for_thread_db): New. (sol_thread_notice_signals, sol_thread_create_inferior): Delete. (sol_thread_new_objfile): Call check_for_thread_db. (sol_thread_mourn_inferior): Adjust to use find_target_beneath. (sol_thread_can_run): Delete. (sol_thread_alive): Adjust to use find_target_beneath. (sol_thread_stop): Delete. (rw_common): Use target_write_memory or target_read_memory. (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers. (ps_lsetregs, ps_lsetfpregs): Use target_store_registers. (solaris_pid_to_str): Remove check for libthread_db initialization failing. (sol_find_new_threads): Remove check for libthread_db initialization failing, or for an invalid inferior_ptid. Adjust to use find_target_beneath. (sol_core_open, sol_core_close, sol_core_detach, sol_core_files_info, sol_find_memory_regions, sol_make_note_section, ignore): Delete. (init_sol_thread_ops): Make it a thread_stratum target. Remove unneeded callback settings. (init_sol_core_ops): Delete. (_initialize_sol_thread): No longer call init_sol_core_ops, set procfs_suppress_run, or hack with core_ops. * target.h (struct target_ops): Add a target_ops * parameter to to_resume, to_fetch_registers, to_store_registers, to_thread_alive and to_find_new_threads. (target_fetch_registers, target_store_registers) (target_thread_alive, target_find_new_threads): Redeclare as function. * target.c (update_current_target): Do not inherit or de_fault to_resume, to_fetch_registers, to_store_registers, to_thread_alive, to_find_new_threads. (target_resume): Adjust. (target_thread_alive, target_find_new_threads): New. (debug_to_resume, debug_to_fetch_registers): Delete. (target_fetch_registers): New. (debug_to_store_registers): Delete. (target_store_registers): New. (debug_to_thread_alive, debug_to_find_new_threads): Delete. (setup_target_debug): Adjust. * gdbcore.h (core_ops): Delete declaration. * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c, inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c, i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c, hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c, nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c, alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c, bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c, hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c, ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c, m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c, mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c, ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c, shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c, vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes. * gdbarch.sh (core_pid_to_str): New gdbarch callback. * gdbarch.h, gdbarch.c: Regenerate. * sol2-tdep.c: Include "inferior.h". (sol2_core_pid_to_str): New. * sol2-tdep.h (sol2_core_pid_to_str): Declare. * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it. * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-23 08:03:50 +08:00
gdbarch_core_pid_to_str (struct gdbarch *gdbarch, ptid_t ptid)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->core_pid_to_str != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_core_pid_to_str called\n");
return gdbarch->core_pid_to_str (gdbarch, ptid);
}
void
set_gdbarch_core_pid_to_str (struct gdbarch *gdbarch,
gdbarch_core_pid_to_str_ftype core_pid_to_str)
{
gdbarch->core_pid_to_str = core_pid_to_str;
}
int
gdbarch_core_thread_name_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->core_thread_name != NULL;
}
const char *
gdbarch_core_thread_name (struct gdbarch *gdbarch, struct thread_info *thr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->core_thread_name != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_core_thread_name called\n");
return gdbarch->core_thread_name (gdbarch, thr);
}
void
set_gdbarch_core_thread_name (struct gdbarch *gdbarch,
gdbarch_core_thread_name_ftype core_thread_name)
{
gdbarch->core_thread_name = core_thread_name;
}
int
gdbarch_core_xfer_siginfo_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->core_xfer_siginfo != NULL;
}
LONGEST
gdbarch_core_xfer_siginfo (struct gdbarch *gdbarch, gdb_byte *readbuf, ULONGEST offset, ULONGEST len)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->core_xfer_siginfo != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_core_xfer_siginfo called\n");
return gdbarch->core_xfer_siginfo (gdbarch, readbuf, offset, len);
}
void
set_gdbarch_core_xfer_siginfo (struct gdbarch *gdbarch,
gdbarch_core_xfer_siginfo_ftype core_xfer_siginfo)
{
gdbarch->core_xfer_siginfo = core_xfer_siginfo;
}
int
gdbarch_gcore_bfd_target_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->gcore_bfd_target != 0;
}
const char *
gdbarch_gcore_bfd_target (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Check variable changed from pre-default. */
gdb_assert (gdbarch->gcore_bfd_target != 0);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_gcore_bfd_target called\n");
return gdbarch->gcore_bfd_target;
}
void
set_gdbarch_gcore_bfd_target (struct gdbarch *gdbarch,
const char * gcore_bfd_target)
{
gdbarch->gcore_bfd_target = gcore_bfd_target;
}
* NEWS: Mention pointer to member improvements. * Makefile.in (gnu-v3-abi.o): Delete special rule. (eval.o, gnu-v3-abi.o, ia64-tdep.o): Update. * ada-valprint.c (ada_print_scalar): Update for new type codes. * c-typeprint.c (c_print_type): Update for new type codes. (c_type_print_varspec_prefix, c_type_print_varspec_suffix) (c_type_print_base): Likewise. (c_type_print_args): Rewrite. * c-valprint.c (c_val_print): Update for new type codes. Remove support for references to members. Treat methods like functions. * cp-abi.c (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New. * cp-abi.h (cplus_print_method_ptr, cplus_method_ptr_size) (cplus_make_method_ptr, cplus_method_ptr_to_value): New prototypes. (struct cp_abi_ops): Add corresponding members. * cp-valprint.c (cp_print_class_method): Delete. (cp_find_class_member): New function. (cp_print_class_member): Use it. Simplify support for bogus member pointers. * dwarf2read.c (quirk_gcc_member_function_pointer): Use lookup_methodptr_type. (read_tag_ptr_to_member_type): Likewise, and lookup_memberptr_type. * eval.c (evaluate_subexp_standard): Implement EVAL_SKIP for OP_SCOPE. Update call to value_aggregate_elt. Rewrite member pointer support. (evaluate_subexp_for_address): Handle OP_SCOPE explicitly. Handle references returned by user defined operators. * f-typeprint.c (f_print_type, f_type_print_varspec_prefix) (f_type_print_varspec_suffix): Remove support for member pointers. * gdbtypes.c (lookup_memberptr_type): Renamed from lookup_member_type and adjusted. (smash_to_memberptr_type): Likewise, from smash_to_member_type. (lookup_methodptr_type): New. (rank_one_type): Adjust for TYPE_CODE_MEMBERPTR. (recursive_dump_type): Update for new types. * gdbtypes.h (enum type_code): Replace TYPE_CODE_MEMBER with TYPE_CODE_MEMBERPTR and TYPE_CODE_METHODPTR. (lookup_memberptr_type, lookup_methodptr_type) (smash_to_memberptr_type): New prototypes. (smash_to_method_type): Formatting fix. (lookup_member_type, smash_to_member_type): Delete prototypes. * gnu-v3-abi.c (gnuv3_get_vtable, gnuv3_get_virtual_fn): New. Do not rely on debug information for the vptr or the method's enclosing type. Handle function descriptors for IA64. (gnuv3_virtual_fn_field): Rewrite using the new functions. (gnuv3_find_method_in, gnuv3_print_method_ptr) (gnuv3_method_ptr_size, gnuv3_make_method_ptr) (gnuv3_method_ptr_to_value): New. (init_gnuv3_ops): Set new members of gnu_v3_abi_ops. * hpread.c (hpread_type_lookup): Update for new types. * infcall.c (value_arg_coerce): Likewise. * m2-typeprint.c (m2_print_type): Remove explicit support for member pointers. * m2-valprint.c (m2_val_print): Likewise. * p-typeprint.c (pascal_type_print_varspec_prefix) (pascal_type_print_varspec_suffix, pascal_type_print_base): Likewise. * p-valprint.c (pascal_val_print): Likewise. (pascal_object_print_class_method, pascal_object_print_class_member): Delete. * p-lang.h (pascal_object_print_class_method) (pascal_object_print_class_member): Delete prototypes. * stabsread.c (read_type): Update for new types. * typeprint.c (print_type_scalar): Likewise. * valops.c (value_struct_elt_for_reference, value_namespace_elt) (value_maybe_namespace_elt, value_aggregate_elt): Add want_address argument. Construct a pointer to member if the address of a function or data member is requested. (value_cast_pointers): Don't modify the input value. (value_cast): Adjust pointer to member handling for new types. Allow null pointer to member constants. Don't modify the input value. (value_ind): Remove pointer to member check. Handle function descriptors for function pointers. (value_struct_elt, value_find_oload_method_list, check_field): Remove pointer to member checks. * value.c (unpack_long): Allow pointers to data members. (value_from_longest): Allow member pointers. * value.h (value_aggregate_elt): Add want_address. * varobj.c (c_variable_editable): Remove check for members. * gdbarch.sh: Add vtable_function_descriptors and vbit_in_delta. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Handle descriptors in virtual tables. (ia64_gdbarch_init): Call set_gdbarch_vtable_function_descriptors. * c-lang.h (cp_print_class_method): Delete prototype. * arm-tdep.c (arm_gdbarch_init): Call set_gdbarch_vbit_in_delta. * mips-tdep.c (mips_gdbarch_init): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * gdb.cp/classes.exp (test_pointers_to_class_members): Update expected output. Test the types of members and member pointers. * gdb.cp/inherit.exp (test_print_mi_member_types): Remove KFAILs for gdb/2092. * gdb.cp/member-ptr.exp: Search for a comment instead of a statement. Enable for GCC. Update expected output for some tests and add new tests. Remove obsolete GCC KFAILs. Allow GCC's class layout. * gdb.cp/member-ptr.cc (Padding, Padding::vspacer, Base, Base::get_x) (Base::vget_base, Left, Left::vget, Right, Right::vget, Diamond) (Diamond::vget_base): New. (main): Add new tests. * gdb.cp/printmethod.exp: Update expected output for member functions. * gdb.cp/virtfunc.exp (test_virtual_calls): Add a KFAIL for print pEe->D::vg().
2007-01-04 02:05:45 +08:00
int
gdbarch_vtable_function_descriptors (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of vtable_function_descriptors, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_vtable_function_descriptors called\n");
return gdbarch->vtable_function_descriptors;
}
void
set_gdbarch_vtable_function_descriptors (struct gdbarch *gdbarch,
int vtable_function_descriptors)
{
gdbarch->vtable_function_descriptors = vtable_function_descriptors;
}
int
gdbarch_vbit_in_delta (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of vbit_in_delta, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_vbit_in_delta called\n");
return gdbarch->vbit_in_delta;
}
void
set_gdbarch_vbit_in_delta (struct gdbarch *gdbarch,
int vbit_in_delta)
{
gdbarch->vbit_in_delta = vbit_in_delta;
}
void
gdbarch_skip_permanent_breakpoint (struct gdbarch *gdbarch, struct regcache *regcache)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->skip_permanent_breakpoint != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_skip_permanent_breakpoint called\n");
gdbarch->skip_permanent_breakpoint (regcache);
}
void
set_gdbarch_skip_permanent_breakpoint (struct gdbarch *gdbarch,
gdbarch_skip_permanent_breakpoint_ftype skip_permanent_breakpoint)
{
gdbarch->skip_permanent_breakpoint = skip_permanent_breakpoint;
}
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
int
gdbarch_max_insn_length_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->max_insn_length != 0;
}
ULONGEST
gdbarch_max_insn_length (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Check variable changed from pre-default. */
gdb_assert (gdbarch->max_insn_length != 0);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_max_insn_length called\n");
return gdbarch->max_insn_length;
}
void
set_gdbarch_max_insn_length (struct gdbarch *gdbarch,
ULONGEST max_insn_length)
{
gdbarch->max_insn_length = max_insn_length;
}
int
gdbarch_displaced_step_copy_insn_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->displaced_step_copy_insn != NULL;
}
struct displaced_step_closure *
gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch, CORE_ADDR from, CORE_ADDR to, struct regcache *regs)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->displaced_step_copy_insn != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_displaced_step_copy_insn called\n");
return gdbarch->displaced_step_copy_insn (gdbarch, from, to, regs);
}
void
set_gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch,
gdbarch_displaced_step_copy_insn_ftype displaced_step_copy_insn)
{
gdbarch->displaced_step_copy_insn = displaced_step_copy_insn;
}
int
gdbarch_displaced_step_hw_singlestep (struct gdbarch *gdbarch, struct displaced_step_closure *closure)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->displaced_step_hw_singlestep != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_displaced_step_hw_singlestep called\n");
return gdbarch->displaced_step_hw_singlestep (gdbarch, closure);
}
void
set_gdbarch_displaced_step_hw_singlestep (struct gdbarch *gdbarch,
gdbarch_displaced_step_hw_singlestep_ftype displaced_step_hw_singlestep)
{
gdbarch->displaced_step_hw_singlestep = displaced_step_hw_singlestep;
}
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-03 00:49:54 +08:00
int
gdbarch_displaced_step_fixup_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->displaced_step_fixup != NULL;
}
void
gdbarch_displaced_step_fixup (struct gdbarch *gdbarch, struct displaced_step_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->displaced_step_fixup != NULL);
/* Do not check predicate: gdbarch->displaced_step_fixup != NULL, allow call. */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_displaced_step_fixup called\n");
gdbarch->displaced_step_fixup (gdbarch, closure, from, to, regs);
}
void
set_gdbarch_displaced_step_fixup (struct gdbarch *gdbarch,
gdbarch_displaced_step_fixup_ftype displaced_step_fixup)
{
gdbarch->displaced_step_fixup = displaced_step_fixup;
}
CORE_ADDR
gdbarch_displaced_step_location (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->displaced_step_location != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_displaced_step_location called\n");
return gdbarch->displaced_step_location (gdbarch);
}
void
set_gdbarch_displaced_step_location (struct gdbarch *gdbarch,
gdbarch_displaced_step_location_ftype displaced_step_location)
{
gdbarch->displaced_step_location = displaced_step_location;
}
int
gdbarch_relocate_instruction_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->relocate_instruction != NULL;
}
void
gdbarch_relocate_instruction (struct gdbarch *gdbarch, CORE_ADDR *to, CORE_ADDR from)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->relocate_instruction != NULL);
/* Do not check predicate: gdbarch->relocate_instruction != NULL, allow call. */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_relocate_instruction called\n");
gdbarch->relocate_instruction (gdbarch, to, from);
}
void
set_gdbarch_relocate_instruction (struct gdbarch *gdbarch,
gdbarch_relocate_instruction_ftype relocate_instruction)
{
gdbarch->relocate_instruction = relocate_instruction;
}
int
gdbarch_overlay_update_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->overlay_update != NULL;
}
void
gdbarch_overlay_update (struct gdbarch *gdbarch, struct obj_section *osect)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->overlay_update != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_overlay_update called\n");
gdbarch->overlay_update (osect);
}
void
set_gdbarch_overlay_update (struct gdbarch *gdbarch,
gdbarch_overlay_update_ftype overlay_update)
{
gdbarch->overlay_update = overlay_update;
}
int
gdbarch_core_read_description_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->core_read_description != NULL;
}
const struct target_desc *
gdbarch_core_read_description (struct gdbarch *gdbarch, struct target_ops *target, bfd *abfd)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->core_read_description != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_core_read_description called\n");
return gdbarch->core_read_description (gdbarch, target, abfd);
}
void
set_gdbarch_core_read_description (struct gdbarch *gdbarch,
gdbarch_core_read_description_ftype core_read_description)
{
gdbarch->core_read_description = core_read_description;
}
int
gdbarch_static_transform_name_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->static_transform_name != NULL;
}
* gdbtypes.h (struct main_type): Change type of name,tag_name, and fields.name members from char * to const char *. All uses updated. (struct cplus_struct_type): Change type of fn_fieldlists.name member from char * to const char *. All uses updated. (type_name_no_tag): Update. (lookup_unsigned_typename, lookup_signed_typename): Update. * gdbtypes.c (type_name_no_tag): Change result type from char * to const char *. All callers updated. (lookup_unsigned_typename, lookup_signed_typename): Change type of name parameter from char * to const char *. * symtab.h (struct cplus_specific): Change type of demangled_name member from char * to const char *. All uses updated. (struct general_symbol_info): Change type of name and mangled_lang.demangled_name members from char * to const char *. All uses updated. (symbol_get_demangled_name, symbol_natural_name): Update. (symbol_demangled_name, symbol_search_name): Update. * symtab.c (symbol_get_demangled_name): Change result type from char * to const char *. All callers updated. (symbol_natural_name, symbol_demangled_name): Ditto. (symbol_search_name): Ditto. (completion_list_add_name): Change type of symname,sym_text, text,word parameters from char * to const char *. (completion_list_objc_symbol): Change type of sym_text, text,word parameters from char * to const char *. * ada-lang.c (find_struct_field): Change type of name parameter from char * to const char *. (encoded_ordered_before): Similarly for N0,N1 parameters. (old_renaming_is_invisible): Similarly for function_name parameter. (ada_type_name): Change result type from char * to const char *. All callers updated. * ada-lang.h (ada_type_name): Update. * buildsym.c (hashname): Change type of name parameter from char * to const char *. * buildsym.h (hashname): Update. * dbxread.c (end_psymtab): Change type of include_list parameter from char ** to const char **. * dwarf2read.c (determine_prefix): Change result type from char * to const char *. All callers updated. * f-lang.c (find_common_for_function): Change type of name, funcname parameters from char * to const char *. * f-lang.c (find_common_for_function): Update. * f-valprint.c (list_all_visible_commons): Change type of funcname parameters from char * to const char *. * gdbarch.sh (static_transform_name): Change type of name parameter and result from char * to const char *. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * i386-sol2-tdep.c (i386_sol2_static_transform_name): Change type of name parameter from char * to const char *. * jv-lang.c (java_primitive_type_from_name): Ditto. (java_demangled_signature_length): Similarly for signature parameter. (java_demangled_signature_copy): Ditto. (java_demangle_type_signature): Ditto. * jv-lang.h (java_primitive_type_from_name): Update. (java_demangle_type_signature): Update. * objc-lang.c (specialcmp): Change type of a,b parameters from char * to const char *. * p-lang.c (is_pascal_string_type): Change type of arrayname parameter from char * to const char *. All callers updated. * p-lang.h (is_pascal_string_type): Update. * solib-frv.c (find_canonical_descriptor_in_load_object): Change type of name parameter from char * to const char *. * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Ditto. * utils.c (fprintf_symbol_filtered): Ditto. * defs.h (fprintf_symbol_filtered): Update. * sparc-tdep.h (sparc_sol2_static_transform_name): Update. * stabsread.h (end_psymtab): Update. * stack.c (find_frame_funname): Change type of funname parameter from char ** to const char **. * stack.h (find_frame_funname): Update. * typeprint.c (type_print): Change type of varstring parameter from char * to const char *. * value.h (type_print): Update. * xcoffread.c (xcoff_start_psymtab): Change type of filename parameter from char * to const char *. All callers updated. (xcoff_end_psymtab): Change type of include_list parameter from char ** to const char **. All callers updated. (swap_sym): Similarly for name parameter. All callers updated. * coffread.c (patch_type): Add (char*) cast to xfree parameter. Use xstrdup. (process_coff_symbol): Use xstrdup. * stabsread.c (stabs_method_name_from_physname): Renamed from update_method_name_from_physname. Change result type from void to char *. All callers updated. (read_member_functions): In has_destructor case, store name in objfile obstack instead of malloc space. In !has_stub case, fix mem leak.
2012-02-07 12:48:23 +08:00
const char *
gdbarch_static_transform_name (struct gdbarch *gdbarch, const char *name)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->static_transform_name != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_static_transform_name called\n");
return gdbarch->static_transform_name (name);
}
void
set_gdbarch_static_transform_name (struct gdbarch *gdbarch,
gdbarch_static_transform_name_ftype static_transform_name)
{
gdbarch->static_transform_name = static_transform_name;
}
* gdbarch.sh (sofun_address_maybe_missing): New gdbarch variable. * gdbarch.c, gdbarch.h: Regenerate. * dbxread.c (find_stab_function_addr): Define unconditionally. (read_dbx_symtab): Use gdbarch_sofun_address_maybe_missing instead of SOFUN_ADDRESS_MAYBE_MISSING. (end_psymtab): Likewise. (process_one_symbol): Likewise. * mdebugread.c (parse_partial_symbols): Likewise. * symtab.h (struct minimal_symbol): Always define "filename" member. * elfread.c (elf_symtab_read): Use msym->filename unconditionally. * minsyms.c (lookup_minimal_symbol): Likewise. * symmisc.c (dump_msymbols): Likewise. * config/i386/i386sol2.mt (DEPRECATED_TM_FILE): Remove. * config/i386/linux.mt (DEPRECATED_TM_FILE): Remove. * config/i386/tm-i386sol2.h: Remove file. * config/i386/tm-linux.h: Remove file. * i386-linux-tdep.c (i386_linux_init_abi): Add call to set_gdbarch_sofun_address_maybe_missing. * i386-sol2-tdep.c (i386_sol2_init_abi): Likewise. * config/powerpc/linux.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/nbsd.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/ppc-eabi.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/ppc-sim.mt (DEPRECATED_TM_FILE): Remove. * config/powerpc/tm-ppc-eabi.h: Remove file. * rs6000-tdep.c (rs6000_gdbarch_init): Add call to set_gdbarch_sofun_address_maybe_missing. * config/sparc/sol2-64.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/sol2.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/tm-sol2.h: Remove file. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Add call to set_gdbarch_sofun_address_maybe_missing. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Likewise. doc/ChangeLog: * gdbarch.texi (Target Conditionals): Remove documentation of SOFUN_ADDRESS_MAYBE_MISSING, replaced by ... (Compiler Characteristics): ... documentation of set_gdbarch_sofun_address_maybe_missing.
2007-10-19 20:26:35 +08:00
int
gdbarch_sofun_address_maybe_missing (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of sofun_address_maybe_missing, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_sofun_address_maybe_missing called\n");
return gdbarch->sofun_address_maybe_missing;
}
void
set_gdbarch_sofun_address_maybe_missing (struct gdbarch *gdbarch,
int sofun_address_maybe_missing)
{
gdbarch->sofun_address_maybe_missing = sofun_address_maybe_missing;
}
int
gdbarch_process_record_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->process_record != NULL;
}
int
gdbarch_process_record (struct gdbarch *gdbarch, struct regcache *regcache, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->process_record != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_process_record called\n");
return gdbarch->process_record (gdbarch, regcache, addr);
}
void
set_gdbarch_process_record (struct gdbarch *gdbarch,
gdbarch_process_record_ftype process_record)
{
gdbarch->process_record = process_record;
}
int
gdbarch_process_record_signal_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->process_record_signal != NULL;
}
int
gdbarch_process_record_signal (struct gdbarch *gdbarch, struct regcache *regcache, enum gdb_signal signal)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->process_record_signal != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_process_record_signal called\n");
return gdbarch->process_record_signal (gdbarch, regcache, signal);
}
void
set_gdbarch_process_record_signal (struct gdbarch *gdbarch,
gdbarch_process_record_signal_ftype process_record_signal)
{
gdbarch->process_record_signal = process_record_signal;
}
int
gdbarch_gdb_signal_from_target_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->gdb_signal_from_target != NULL;
}
enum gdb_signal
gdbarch_gdb_signal_from_target (struct gdbarch *gdbarch, int signo)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->gdb_signal_from_target != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_gdb_signal_from_target called\n");
return gdbarch->gdb_signal_from_target (gdbarch, signo);
}
void
set_gdbarch_gdb_signal_from_target (struct gdbarch *gdbarch,
gdbarch_gdb_signal_from_target_ftype gdb_signal_from_target)
{
gdbarch->gdb_signal_from_target = gdb_signal_from_target;
}
This patch implements the new gdbarch method gdbarch_gdb_signal_to_target. It will be used when one wants to convert between the internal GDB signal representation (enum gdb_signal) and the target's representation. The idea of this patch came from a chat between Pedro and I on IRC, plus the discussion of my patches to add the new $_exitsignal convenience variable: <http://sourceware.org/ml/gdb-patches/2013-06/msg00452.html> <http://sourceware.org/ml/gdb-patches/2013-06/msg00352.html> What I did was to investigate, on the Linux kernel, which targets shared the signal numbers definition with the generic definition, present at <include/uapi/asm-generic/signal.h>. For the record, I used linux-3.10-rc7 as the main source of information, always looking at <arch/<ARCH_NAME>/include/uapi/asm/signal.h>. For SIGRTMAX (which defaults to _NSIG in most cases), I had to look at different signal-related files, but most of them (except MIPS) were defined to 64 anyway. Then, with all the differences in hand, I implemented the bits on each target. 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com> * linux-tdep.c: Define enum with generic signal numbers. (linux_gdb_signal_from_target): New function. (linux_gdb_signal_to_target): Likewise. (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target methods to the functions above. * linux-tdep.h (linux_gdb_signal_from_target): New prototype. (linux_gdb_signal_to_target): Likewise. * alpha-linux-tdep.c: Define new enum with signals different from generic Linux kernel. (alpha_linux_gdb_signal_from_target): New function. (alpha_linux_gdb_signal_to_target): Likewise. (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target with the functions mentioned above. * avr-tdep.c: Define enum with differences between Linux kernel and AVR signals. (avr_linux_gdb_signal_from_target): New function. (avr_linux_gdb_signal_to_target): Likewise. (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to the functions mentioned above. * sparc-linux-tdep.c: Define enum with differences between SPARC and generic Linux kernel signal numbers. (sparc32_linux_gdb_signal_from_target): New function. (sparc32_linux_gdb_signal_to_target): Likewise. (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target to the functions defined above. * xtensa-linux-tdep.c: Define enum with differences between Xtensa and Linux kernel generic signals. (xtensa_linux_gdb_signal_from_target): New function. (xtensa_linux_gdb_signal_to_target): Likewise. (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target to the functions defined above. * mips-linux-tdep.c: Define enum with differences between signals in MIPS and Linux kernel generic ones. (mips_gdb_signal_to_target): New function. (mips_gdb_signal_from_target): Redefine to use new enum, handle only different signals from the Linux kernel generic. (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target the functions defined above. * mips-linux-tdep.h (enum mips_signals): Remove.
2013-08-10 00:54:43 +08:00
int
gdbarch_gdb_signal_to_target_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->gdb_signal_to_target != NULL;
}
int
gdbarch_gdb_signal_to_target (struct gdbarch *gdbarch, enum gdb_signal signal)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->gdb_signal_to_target != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_gdb_signal_to_target called\n");
return gdbarch->gdb_signal_to_target (gdbarch, signal);
}
void
set_gdbarch_gdb_signal_to_target (struct gdbarch *gdbarch,
gdbarch_gdb_signal_to_target_ftype gdb_signal_to_target)
{
gdbarch->gdb_signal_to_target = gdb_signal_to_target;
}
2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/ * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO. * infrun.c (siginfo_value_read, siginfo_value_write): New. (siginfo_value_funcs): New. (siginfo_make_value): New. (_initialize_infrun): Create the $_siginfo convenience variable. * gdbtypes.h (append_composite_type_field_aligned): Declare. * gdbtypes.c (append_composite_type_field): Rename to... (append_composite_type_field_aligned): ... this. Add ALIGNMENT argument. Handle it. (append_composite_type_field): Rewrite on top of append_composite_type_field_aligned. * value.h (internalvar_make_value): New typedef. (struct internalvar) <make_value>: New field. (create_internalvar_type_lazy): Declare. * value.c (create_internalvar): Clear make_value. (create_internalvar_type_lazy): New. (value_of_internalvar): If make_value is set use it. (preserve_values): Skip internal variables that don't have a value. * gdbarch.sh (get_siginfo_type): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.h, linux-tdep.c: New. * amd64-linux-tdep.c: Include "linux-tdep.h". (amd64_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * i386-linux-tdep.c: Include "linux-tdep.h". (i386_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * arm-linux-tdep.c: Include "linux-tdep.h". (i386_linux_init_abi): Register linux_get_siginfo_type and linux_get_siginfo_mapper. * linux-nat.c (linux_xfer_siginfo): New. (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO. * remote.c (PACKET_qXfer_siginfo_read) (PACKET_qXfer_siginfo_write): New. (feature remote_protocol_features): Add "qXfer:siginfo:read" and "qXfer:siginfo:write" features. (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO. (_initialize_remote): Add "set/show remote read-siginfo-object" and "set/show remote write-siginfo-object" commands. * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o. (HFILES_NO_SRCDIR): Add linux-tdep.h. (ALLDEPFILES): Add linux-tdep.c. * configure.tgt (arm*-*-linux* | arm*-*-uclinux*) (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to gdb_target_obs. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/gdbserver/ * server.c (handle_query): Report qXfer:siginfo:read and qXfer:siginfo:write as supported and handle them. * target.h (struct target_ops) <qxfer_siginfo>: New field. * linux-low.c (linux_xfer_siginfo): New. (linux_target_ops): Set it. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/doc/ * gdb.texinfo (Signals): Document $_siginfo. (Convenience Variables): Mention $_siginfo. (Remote Configuration): Document qXfer:siginfo:read, qXfer:siginfo:write packets, and the read-siginfo-object, write-siginfo-object commands. 2009-02-06 Pedro Alves <pedro@codesourcery.com> gdb/testsuite/ * gdb.base/siginfo-obj.c, gdb.base/siginfo-obj.exp: New.
2009-02-07 06:59:01 +08:00
int
gdbarch_get_siginfo_type_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->get_siginfo_type != NULL;
}
struct type *
gdbarch_get_siginfo_type (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->get_siginfo_type != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_get_siginfo_type called\n");
return gdbarch->get_siginfo_type (gdbarch);
}
void
set_gdbarch_get_siginfo_type (struct gdbarch *gdbarch,
gdbarch_get_siginfo_type_ftype get_siginfo_type)
{
gdbarch->get_siginfo_type = get_siginfo_type;
}
int
gdbarch_record_special_symbol_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->record_special_symbol != NULL;
}
void
gdbarch_record_special_symbol (struct gdbarch *gdbarch, struct objfile *objfile, asymbol *sym)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->record_special_symbol != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_record_special_symbol called\n");
gdbarch->record_special_symbol (gdbarch, objfile, sym);
}
void
set_gdbarch_record_special_symbol (struct gdbarch *gdbarch,
gdbarch_record_special_symbol_ftype record_special_symbol)
{
gdbarch->record_special_symbol = record_special_symbol;
}
Implementing catch syscall. * amd64-linux-tdep.c: Include xml-syscall.h header, define the XML syscall name for the architecture. (amd64_linux_get_syscall_number): New function. (amd64_linux_init_abi): Register the correct functions for syscall catchpoint; set the correct syscall file name. * breakpoint.c: New include: xml-syscall.h. (set_raw_breakpoint_without_location): Setting the parameters for the catch syscall feature. (insert_catch_syscall): New. (remove_catch_syscall): New. (breakpoint_hit_catch_syscall): New. (print_it_catch_syscall): New. (print_one_catch_syscall): New. (print_mention_catch_syscall): New. (catch_syscall_breakpoint_ops): New. (syscall_catchpoint_p): New. (create_catchpoint_without_mention): New. (create_catchpoint): Modified in order to use create_catchpoint_without_mention. (create_syscall_event_catchpoint): New. (clean_up_filters): New. (catch_syscall_split_args): New. (catch_syscall_command_1): New. (delete_breakpoint): Add cleanup for catch syscall. (is_syscall_catchpoint_enabled): New. (catch_syscall_enabled): New. (catching_syscall_number): New. (catch_syscall_completer): New completer function. (add_catch_command): Add the completer function for catchpoints. * breakpoint.h (syscalls_to_be_caught): New vector. (catch_syscall_enabled): New. (catching_syscall_number): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * gdbarch.sh: Add syscall catchpoint functions and structures. (get_syscall_number): New. (UNKNOWN_SYSCALL): New definition. * i386-linux-nat.c (i386_linux_resume): Select the proper request to be made for ptrace() considering if we are catching syscalls or not. * i386-linux-tdep.c: Include xml-syscall.h header, define the XML syscall name for the architecture. (i386_linux_get_syscall_number): New. (i386_linux_init_abi): Register the correct functions for syscall catchpoint; set the correct syscall file name. * inf-child.c (inf_child_set_syscall_catchpoint): New. (inf_child_target): Assign default values to target_ops. * inf-ptrace.c (inf_ptrace_resume): Select the proper request to be made for ptrace() considering if we are catching syscalls or not. * inferior.h (struct inferior): Included new variables any_syscall_count, syscalls_counts and total_syscalls_count, used to keep track of requested syscall catchpoints. * infrun.c (resume): Add syscall catchpoint. (deal_with_syscall_event): New. (handle_inferior_event): Add syscall entry/return events. (inferior_has_called_syscall): New. * linux-nat.c: Define some helpful variables to track wether we have support for the needed ptrace option. (linux_test_for_tracesysgood): New. (linux_supports_tracesysgood): New. (linux_enable_tracesysgood): New. (linux_enable_event_reporting): Save the current used ptrace options. (linux_child_post_attach): Calling linux_enable_tracesysgood. (linux_child_post_startup_inferior): Likewise. (linux_child_set_syscall_catchpoint): New function. (linux_handle_extended_wait): Handle the case which the inferior stops because it has called or returned from a syscall. (linux_target_install_ops): Install the necessary functions to handle syscall catchpoints. * linux-nat.h (struct lwp_info): Include syscall_state into the structure, which indicates if we are in a syscall entry or return. * ppc-linux-tdep.c: Include xml-syscall.h header, define the XML syscall filename for the arch. (ppc_linux_get_syscall_number): New. (ppc_linux_init_abi): Register the correct functions for syscall catchpoint; setting the correct name for the XML syscall file. * target.c (update_current_target): Update/copy functions related to syscall catchpoint. (target_waitstatus_to_string): Add syscall catchpoint entry/return events. * target.h (struct target_waitstatus): Add syscall number. (struct syscall): New struct to hold information about syscalls in the system. (struct target_ops): Add ops for syscall catchpoint. (inferior_has_called_syscall): New. (target_set_syscall_catchpoint): New. * xml-support.c (xml_fetch_content_from_file): New function, transferred from xml-tdesc.c. * xml-support.h (xml_fetch_content_from_file): New. * xml-tdesc.c (fetch_xml_from_file): Function removed; transferred to xml-support.c. (file_read_description_xml): Updated to use the new xml_fetch_content_from_file function. * syscalls/gdb-syscalls.dtd: New definition file for syscall's XML support. * syscalls/amd64-linux.xml: New file containing information about syscalls for GNU/Linux systems that use amd64 architecture. * syscalls/i386-linux.xml: New file containing information about syscalls for GNU/Linux systems that use i386 architecture. * syscalls/ppc-linux.xml: New file containing information about syscalls for GNU/Linux systems that use PPC architecture. * syscalls/ppc64-linux.xml: New file containing information about syscalls for GNU/Linux systems that use PPC64 architecture. * xml-syscall.c: New file containing functions for manipulating syscall's XML files. * xml-syscall.h: New file, exporting the functions above mentioned. * Makefile.in: Support for relocatable GDB datadir and XML syscall. * NEWS: Added information about the catch syscall feature. * doc/gdb.texinfo (Set Catchpoints): Documentation about the new feature. * testsuite/Makefile.in: Inclusion of catch-syscall object. * testsuite/gdb.base/catch-syscall.c: New file. * testsuite/gdb.base/catch-syscall.exp: New file.
2009-09-15 11:30:08 +08:00
int
gdbarch_get_syscall_number_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->get_syscall_number != NULL;
}
LONGEST
gdbarch_get_syscall_number (struct gdbarch *gdbarch, ptid_t ptid)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->get_syscall_number != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_get_syscall_number called\n");
return gdbarch->get_syscall_number (gdbarch, ptid);
}
void
set_gdbarch_get_syscall_number (struct gdbarch *gdbarch,
gdbarch_get_syscall_number_ftype get_syscall_number)
{
gdbarch->get_syscall_number = get_syscall_number;
}
Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead of global This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function.
2014-11-21 01:28:18 +08:00
const char *
gdbarch_xml_syscall_file (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of xml_syscall_file, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_xml_syscall_file called\n");
return gdbarch->xml_syscall_file;
}
void
set_gdbarch_xml_syscall_file (struct gdbarch *gdbarch,
const char * xml_syscall_file)
{
gdbarch->xml_syscall_file = xml_syscall_file;
}
struct syscalls_info *
gdbarch_syscalls_info (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of syscalls_info, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_syscalls_info called\n");
return gdbarch->syscalls_info;
}
void
set_gdbarch_syscalls_info (struct gdbarch *gdbarch,
struct syscalls_info * syscalls_info)
{
gdbarch->syscalls_info = syscalls_info;
}
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
const char *const *
gdbarch_stap_integer_prefixes (struct gdbarch *gdbarch)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
gdb_assert (gdbarch != NULL);
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
/* Skip verify of stap_integer_prefixes, invalid_p == 0 */
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
if (gdbarch_debug >= 2)
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_integer_prefixes called\n");
return gdbarch->stap_integer_prefixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
void
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
set_gdbarch_stap_integer_prefixes (struct gdbarch *gdbarch,
const char *const * stap_integer_prefixes)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
gdbarch->stap_integer_prefixes = stap_integer_prefixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
const char *const *
gdbarch_stap_integer_suffixes (struct gdbarch *gdbarch)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
gdb_assert (gdbarch != NULL);
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
/* Skip verify of stap_integer_suffixes, invalid_p == 0 */
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
if (gdbarch_debug >= 2)
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_integer_suffixes called\n");
return gdbarch->stap_integer_suffixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
void
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
set_gdbarch_stap_integer_suffixes (struct gdbarch *gdbarch,
const char *const * stap_integer_suffixes)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
gdbarch->stap_integer_suffixes = stap_integer_suffixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
const char *const *
gdbarch_stap_register_prefixes (struct gdbarch *gdbarch)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
gdb_assert (gdbarch != NULL);
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
/* Skip verify of stap_register_prefixes, invalid_p == 0 */
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
if (gdbarch_debug >= 2)
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_register_prefixes called\n");
return gdbarch->stap_register_prefixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
void
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
set_gdbarch_stap_register_prefixes (struct gdbarch *gdbarch,
const char *const * stap_register_prefixes)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
gdbarch->stap_register_prefixes = stap_register_prefixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
const char *const *
gdbarch_stap_register_suffixes (struct gdbarch *gdbarch)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
gdb_assert (gdbarch != NULL);
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
/* Skip verify of stap_register_suffixes, invalid_p == 0 */
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
if (gdbarch_debug >= 2)
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_register_suffixes called\n");
return gdbarch->stap_register_suffixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
void
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
set_gdbarch_stap_register_suffixes (struct gdbarch *gdbarch,
const char *const * stap_register_suffixes)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
gdbarch->stap_register_suffixes = stap_register_suffixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
const char *const *
gdbarch_stap_register_indirection_prefixes (struct gdbarch *gdbarch)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
gdb_assert (gdbarch != NULL);
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
/* Skip verify of stap_register_indirection_prefixes, invalid_p == 0 */
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
if (gdbarch_debug >= 2)
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_register_indirection_prefixes called\n");
return gdbarch->stap_register_indirection_prefixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
void
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
set_gdbarch_stap_register_indirection_prefixes (struct gdbarch *gdbarch,
const char *const * stap_register_indirection_prefixes)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
gdbarch->stap_register_indirection_prefixes = stap_register_indirection_prefixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
const char *const *
gdbarch_stap_register_indirection_suffixes (struct gdbarch *gdbarch)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
gdb_assert (gdbarch != NULL);
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
/* Skip verify of stap_register_indirection_suffixes, invalid_p == 0 */
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
if (gdbarch_debug >= 2)
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_register_indirection_suffixes called\n");
return gdbarch->stap_register_indirection_suffixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
void
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
set_gdbarch_stap_register_indirection_suffixes (struct gdbarch *gdbarch,
const char *const * stap_register_indirection_suffixes)
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
{
Extend SystemTap SDT probe argument parser This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise.
2013-12-20 04:53:40 +08:00
gdbarch->stap_register_indirection_suffixes = stap_register_indirection_suffixes;
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com> Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-04-28 04:47:57 +08:00
}
const char *
gdbarch_stap_gdb_register_prefix (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of stap_gdb_register_prefix, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_gdb_register_prefix called\n");
return gdbarch->stap_gdb_register_prefix;
}
void
set_gdbarch_stap_gdb_register_prefix (struct gdbarch *gdbarch,
const char * stap_gdb_register_prefix)
{
gdbarch->stap_gdb_register_prefix = stap_gdb_register_prefix;
}
const char *
gdbarch_stap_gdb_register_suffix (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of stap_gdb_register_suffix, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_gdb_register_suffix called\n");
return gdbarch->stap_gdb_register_suffix;
}
void
set_gdbarch_stap_gdb_register_suffix (struct gdbarch *gdbarch,
const char * stap_gdb_register_suffix)
{
gdbarch->stap_gdb_register_suffix = stap_gdb_register_suffix;
}
int
gdbarch_stap_is_single_operand_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->stap_is_single_operand != NULL;
}
int
gdbarch_stap_is_single_operand (struct gdbarch *gdbarch, const char *s)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->stap_is_single_operand != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_is_single_operand called\n");
return gdbarch->stap_is_single_operand (gdbarch, s);
}
void
set_gdbarch_stap_is_single_operand (struct gdbarch *gdbarch,
gdbarch_stap_is_single_operand_ftype stap_is_single_operand)
{
gdbarch->stap_is_single_operand = stap_is_single_operand;
}
int
gdbarch_stap_parse_special_token_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->stap_parse_special_token != NULL;
}
int
gdbarch_stap_parse_special_token (struct gdbarch *gdbarch, struct stap_parse_info *p)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->stap_parse_special_token != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_stap_parse_special_token called\n");
return gdbarch->stap_parse_special_token (gdbarch, p);
}
void
set_gdbarch_stap_parse_special_token (struct gdbarch *gdbarch,
gdbarch_stap_parse_special_token_ftype stap_parse_special_token)
{
gdbarch->stap_parse_special_token = stap_parse_special_token;
}
int
gdbarch_dtrace_parse_probe_argument_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->dtrace_parse_probe_argument != NULL;
}
void
gdbarch_dtrace_parse_probe_argument (struct gdbarch *gdbarch, struct parser_state *pstate, int narg)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->dtrace_parse_probe_argument != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_dtrace_parse_probe_argument called\n");
gdbarch->dtrace_parse_probe_argument (gdbarch, pstate, narg);
}
void
set_gdbarch_dtrace_parse_probe_argument (struct gdbarch *gdbarch,
gdbarch_dtrace_parse_probe_argument_ftype dtrace_parse_probe_argument)
{
gdbarch->dtrace_parse_probe_argument = dtrace_parse_probe_argument;
}
int
gdbarch_dtrace_probe_is_enabled_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->dtrace_probe_is_enabled != NULL;
}
int
gdbarch_dtrace_probe_is_enabled (struct gdbarch *gdbarch, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->dtrace_probe_is_enabled != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_dtrace_probe_is_enabled called\n");
return gdbarch->dtrace_probe_is_enabled (gdbarch, addr);
}
void
set_gdbarch_dtrace_probe_is_enabled (struct gdbarch *gdbarch,
gdbarch_dtrace_probe_is_enabled_ftype dtrace_probe_is_enabled)
{
gdbarch->dtrace_probe_is_enabled = dtrace_probe_is_enabled;
}
int
gdbarch_dtrace_enable_probe_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->dtrace_enable_probe != NULL;
}
void
gdbarch_dtrace_enable_probe (struct gdbarch *gdbarch, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->dtrace_enable_probe != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_dtrace_enable_probe called\n");
gdbarch->dtrace_enable_probe (gdbarch, addr);
}
void
set_gdbarch_dtrace_enable_probe (struct gdbarch *gdbarch,
gdbarch_dtrace_enable_probe_ftype dtrace_enable_probe)
{
gdbarch->dtrace_enable_probe = dtrace_enable_probe;
}
int
gdbarch_dtrace_disable_probe_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->dtrace_disable_probe != NULL;
}
void
gdbarch_dtrace_disable_probe (struct gdbarch *gdbarch, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->dtrace_disable_probe != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_dtrace_disable_probe called\n");
gdbarch->dtrace_disable_probe (gdbarch, addr);
}
void
set_gdbarch_dtrace_disable_probe (struct gdbarch *gdbarch,
gdbarch_dtrace_disable_probe_ftype dtrace_disable_probe)
{
gdbarch->dtrace_disable_probe = dtrace_disable_probe;
}
int
gdbarch_has_global_solist (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of has_global_solist, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_has_global_solist called\n");
return gdbarch->has_global_solist;
}
void
set_gdbarch_has_global_solist (struct gdbarch *gdbarch,
int has_global_solist)
{
gdbarch->has_global_solist = has_global_solist;
}
int
gdbarch_has_global_breakpoints (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of has_global_breakpoints, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_has_global_breakpoints called\n");
return gdbarch->has_global_breakpoints;
}
void
set_gdbarch_has_global_breakpoints (struct gdbarch *gdbarch,
int has_global_breakpoints)
{
gdbarch->has_global_breakpoints = has_global_breakpoints;
}
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 17:51:43 +08:00
int
gdbarch_has_shared_address_space (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->has_shared_address_space != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_has_shared_address_space called\n");
return gdbarch->has_shared_address_space (gdbarch);
}
void
set_gdbarch_has_shared_address_space (struct gdbarch *gdbarch,
gdbarch_has_shared_address_space_ftype has_shared_address_space)
{
gdbarch->has_shared_address_space = has_shared_address_space;
}
Add fast tracepoints. * arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-06 12:20:27 +08:00
int
gdbarch_fast_tracepoint_valid_at (struct gdbarch *gdbarch, CORE_ADDR addr, std::string *msg)
Add fast tracepoints. * arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-06 12:20:27 +08:00
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->fast_tracepoint_valid_at != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_fast_tracepoint_valid_at called\n");
Remove isize output argument from fast_tracepoint_valid_at This patch removes the isize output argument from the fast_tracepoint_valid_at gdbarch hook. It was used to return the size of the instruction that needs to be replaced when installing a fast tracepoint. Instead of getting this value from the fast_tracepoint_valid_at hook, we can call the gdb_insn_length function. If we do not do this, then architectures which do not have a restriction on where to install the fast tracepoint will send uninitialized memory off to GDBserver. See remote_download_tracepoint: ~~~ int isize; if (gdbarch_fast_tracepoint_valid_at (target_gdbarch (), tpaddr, &isize, NULL)) xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":F%x", isize); ~~~ The default implementation of fast_tracepoint_valid_at will not set isize resulting in uninitialized memory being sent. Later on, GDBserver could use this information to compute a jump offset. gdb/ChangeLog: * arch-utils.c (default_fast_tracepoint_valid_at): Remove unused isize argument. * arch-utils.h (default_fast_tracepoint_valid_at): Likewise. * breakpoint.c (check_fast_tracepoint_sals): Adjust call to gdbarch_fast_tracepoint_valid_at. * gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize argument. Do not set it. * remote.c (remote_download_tracepoint): Adjust call to gdbarch_fast_tracepoint_valid_at. Call gdb_insn_length to get the instruction length.
2015-07-31 01:05:00 +08:00
return gdbarch->fast_tracepoint_valid_at (gdbarch, addr, msg);
Add fast tracepoints. * arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-06 12:20:27 +08:00
}
void
set_gdbarch_fast_tracepoint_valid_at (struct gdbarch *gdbarch,
gdbarch_fast_tracepoint_valid_at_ftype fast_tracepoint_valid_at)
{
gdbarch->fast_tracepoint_valid_at = fast_tracepoint_valid_at;
}
void
gdbarch_guess_tracepoint_registers (struct gdbarch *gdbarch, struct regcache *regcache, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->guess_tracepoint_registers != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_guess_tracepoint_registers called\n");
gdbarch->guess_tracepoint_registers (gdbarch, regcache, addr);
}
void
set_gdbarch_guess_tracepoint_registers (struct gdbarch *gdbarch,
gdbarch_guess_tracepoint_registers_ftype guess_tracepoint_registers)
{
gdbarch->guess_tracepoint_registers = guess_tracepoint_registers;
}
gdb 2010-03-05 Corinna Vinschen <vinschen@redhat.com> Tom Tromey <tromey@redhat.com> * utils.c (host_char_to_target): Add 'gdbarch' argument. (parse_escape): Likewise. * python/py-utils.c (unicode_to_target_string): Update. (unicode_to_target_python_string): Update. (target_string_to_unicode): Update. * printcmd.c (printf_command): Update. * p-exp.y (yylex): Update. * objc-exp.y (yylex): Update. * mi/mi-parse.c: Include charset.h. (mi_parse_escape): New function. (mi_parse_argv): Use it. * jv-exp.y (yylex): Update. * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New function. (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset. * gdbarch.sh (auto_charset, auto_wide_charset): New. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * defs.h (parse_escape): Update. * cli/cli-setshow.c: Include arch-utils.h. (do_setshow_command): Update. * cli/cli-cmds.c (echo_command): Update. * charset.h (target_charset, target_wide_charset): Update. * charset.c: Include arch-utils.h. (target_charset_name): Default to "auto". (target_wide_charset_name): Likewise. (show_target_charset_name): Handle "auto". (show_target_wide_charset_name): Likewise. (be_le_arch): New global. (set_be_le_names): Add 'gdbarch' argument. (validate): Likewise. Don't call set_be_le_names. (set_charset_sfunc, set_host_charset_sfunc) (set_target_charset_sfunc, set_target_wide_charset_sfunc): Update. (target_charset): Add 'gdbarch' argument. (target_wide_charset): Likewise. Remove 'byte_order' argument. (auto_target_charset_name): New global. (default_auto_charset, default_auto_wide_charset): New functions. (_initialize_charset): Set auto_target_charset_name. Allow "auto" for target charsets. Copy result of nl_langinfo. Use GetACP if USE_WIN32API. * c-lang.c (charset_for_string_type): Add 'gdbarch' argument, remove 'byte_order' argument. Update. (classify_type): Likewise. (c_emit_char): Update. (c_printchar): Update. (c_printstr): Update. (c_get_string): Update. (evaluate_subexp_c): Update. * arch-utils.h (default_auto_charset, default_auto_wide_charset): Declare. * python/python.c (gdbpy_target_charset): New function. (gdbpy_target_wide_charset): Likewise. (GdbMethods): Update. * NEWS: Update. gdb/doc * gdb.texinfo (Basic Python): Document target_charset and target_wide_charset. gdb/testsuite * gdb.python/py-prettyprint.py (pp_nullstr.to_string): Use gdb.target_charset. (pp_ns.to_string): Likewise.
2010-03-06 04:18:19 +08:00
const char *
gdbarch_auto_charset (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->auto_charset != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_auto_charset called\n");
return gdbarch->auto_charset ();
}
void
set_gdbarch_auto_charset (struct gdbarch *gdbarch,
gdbarch_auto_charset_ftype auto_charset)
{
gdbarch->auto_charset = auto_charset;
}
const char *
gdbarch_auto_wide_charset (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->auto_wide_charset != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_auto_wide_charset called\n");
return gdbarch->auto_wide_charset ();
}
void
set_gdbarch_auto_wide_charset (struct gdbarch *gdbarch,
gdbarch_auto_wide_charset_ftype auto_wide_charset)
{
gdbarch->auto_wide_charset = auto_wide_charset;
}
const char *
gdbarch_solib_symbols_extension (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_solib_symbols_extension called\n");
return gdbarch->solib_symbols_extension;
}
void
set_gdbarch_solib_symbols_extension (struct gdbarch *gdbarch,
const char * solib_symbols_extension)
{
gdbarch->solib_symbols_extension = solib_symbols_extension;
}
int
gdbarch_has_dos_based_file_system (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of has_dos_based_file_system, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_has_dos_based_file_system called\n");
return gdbarch->has_dos_based_file_system;
}
void
set_gdbarch_has_dos_based_file_system (struct gdbarch *gdbarch,
int has_dos_based_file_system)
{
gdbarch->has_dos_based_file_system = has_dos_based_file_system;
}
void
gdbarch_gen_return_address (struct gdbarch *gdbarch, struct agent_expr *ax, struct axs_value *value, CORE_ADDR scope)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->gen_return_address != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_gen_return_address called\n");
gdbarch->gen_return_address (gdbarch, ax, value, scope);
}
void
set_gdbarch_gen_return_address (struct gdbarch *gdbarch,
gdbarch_gen_return_address_ftype gen_return_address)
{
gdbarch->gen_return_address = gen_return_address;
}
int
gdbarch_info_proc_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->info_proc != NULL;
}
void
gdbarch_info_proc (struct gdbarch *gdbarch, const char *args, enum info_proc_what what)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->info_proc != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_info_proc called\n");
gdbarch->info_proc (gdbarch, args, what);
}
void
set_gdbarch_info_proc (struct gdbarch *gdbarch,
gdbarch_info_proc_ftype info_proc)
{
gdbarch->info_proc = info_proc;
}
int
gdbarch_core_info_proc_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->core_info_proc != NULL;
}
void
gdbarch_core_info_proc (struct gdbarch *gdbarch, const char *args, enum info_proc_what what)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->core_info_proc != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_core_info_proc called\n");
gdbarch->core_info_proc (gdbarch, args, what);
}
void
set_gdbarch_core_info_proc (struct gdbarch *gdbarch,
gdbarch_core_info_proc_ftype core_info_proc)
{
gdbarch->core_info_proc = core_info_proc;
}
New "iterate_over_objfiles_in_search_order" gdbarch method. This patch introduces the "iterate_over_objfiles_in_search_order" gdbarch method, as well as its default implementation, and converts the areas where it will matter to using this gdbarch method. The default method implementation is the only one installed, and the changes should have no functional impact in terms of behavior. This only paves the way for the architectures that will need their own version. gdb/ChangeLog: * gdbarch.sh: Add generation of "iterate_over_objfiles_in_search_order_cb_ftype" typedef in gdbarch.h. Add include of "objfiles.h" in gdbarch.c. (iterate_over_objfiles_in_search_order): New gdbarch method. * gdbarch.h, gdbarch.c: Regenerate. * objfiles.h (default_iterate_over_objfiles_in_search_order): Add declaration. * objfiles.c (default_iterate_over_objfiles_in_search_order): New function. * symtab.c (lookup_symbol_aux_objfile): New function, extracted out of lookup_symbol_aux_symtabs. (lookup_symbol_aux_symtabs): Replace extracted-out code by call to lookup_symbol_aux_objfile. (struct global_sym_lookup_data): New type. (lookup_symbol_global_iterator_cb): New function. (lookup_symbol_global): Search for symbol using gdbarch_iterate_over_objfiles_in_search_order and lookup_symbol_global_iterator_cb. * findvar.c (struct minsym_lookup_data): New type. (minsym_lookup_iterator_cb): New function. (default_read_var_value) [case LOC_UNRESOLVED]: Resolve the symbol's address via gdbarch_iterate_over_objfiles_in_search_order and minsym_lookup_iterator_cb.
2012-06-05 21:50:50 +08:00
void
gdbarch_iterate_over_objfiles_in_search_order (struct gdbarch *gdbarch, iterate_over_objfiles_in_search_order_cb_ftype *cb, void *cb_data, struct objfile *current_objfile)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->iterate_over_objfiles_in_search_order != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_iterate_over_objfiles_in_search_order called\n");
gdbarch->iterate_over_objfiles_in_search_order (gdbarch, cb, cb_data, current_objfile);
}
void
set_gdbarch_iterate_over_objfiles_in_search_order (struct gdbarch *gdbarch,
gdbarch_iterate_over_objfiles_in_search_order_ftype iterate_over_objfiles_in_search_order)
{
gdbarch->iterate_over_objfiles_in_search_order = iterate_over_objfiles_in_search_order;
}
struct ravenscar_arch_ops *
gdbarch_ravenscar_ops (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of ravenscar_ops, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_ravenscar_ops called\n");
return gdbarch->ravenscar_ops;
}
void
set_gdbarch_ravenscar_ops (struct gdbarch *gdbarch,
struct ravenscar_arch_ops * ravenscar_ops)
{
gdbarch->ravenscar_ops = ravenscar_ops;
}
int
gdbarch_insn_is_call (struct gdbarch *gdbarch, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->insn_is_call != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_insn_is_call called\n");
return gdbarch->insn_is_call (gdbarch, addr);
}
void
set_gdbarch_insn_is_call (struct gdbarch *gdbarch,
gdbarch_insn_is_call_ftype insn_is_call)
{
gdbarch->insn_is_call = insn_is_call;
}
int
gdbarch_insn_is_ret (struct gdbarch *gdbarch, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->insn_is_ret != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_insn_is_ret called\n");
return gdbarch->insn_is_ret (gdbarch, addr);
}
void
set_gdbarch_insn_is_ret (struct gdbarch *gdbarch,
gdbarch_insn_is_ret_ftype insn_is_ret)
{
gdbarch->insn_is_ret = insn_is_ret;
}
int
gdbarch_insn_is_jump (struct gdbarch *gdbarch, CORE_ADDR addr)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->insn_is_jump != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_insn_is_jump called\n");
return gdbarch->insn_is_jump (gdbarch, addr);
}
void
set_gdbarch_insn_is_jump (struct gdbarch *gdbarch,
gdbarch_insn_is_jump_ftype insn_is_jump)
{
gdbarch->insn_is_jump = insn_is_jump;
}
int
gdbarch_auxv_parse_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
return gdbarch->auxv_parse != NULL;
}
int
gdbarch_auxv_parse (struct gdbarch *gdbarch, gdb_byte **readptr, gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->auxv_parse != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_auxv_parse called\n");
return gdbarch->auxv_parse (gdbarch, readptr, endptr, typep, valp);
}
void
set_gdbarch_auxv_parse (struct gdbarch *gdbarch,
gdbarch_auxv_parse_ftype auxv_parse)
{
gdbarch->auxv_parse = auxv_parse;
}
void
gdbarch_print_auxv_entry (struct gdbarch *gdbarch, struct ui_file *file, CORE_ADDR type, CORE_ADDR val)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->print_auxv_entry != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_print_auxv_entry called\n");
gdbarch->print_auxv_entry (gdbarch, file, type, val);
}
void
set_gdbarch_print_auxv_entry (struct gdbarch *gdbarch,
gdbarch_print_auxv_entry_ftype print_auxv_entry)
{
gdbarch->print_auxv_entry = print_auxv_entry;
}
int
gdbarch_vsyscall_range (struct gdbarch *gdbarch, struct mem_range *range)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->vsyscall_range != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_vsyscall_range called\n");
return gdbarch->vsyscall_range (gdbarch, range);
}
void
set_gdbarch_vsyscall_range (struct gdbarch *gdbarch,
gdbarch_vsyscall_range_ftype vsyscall_range)
{
gdbarch->vsyscall_range = vsyscall_range;
}
CORE_ADDR
gdbarch_infcall_mmap (struct gdbarch *gdbarch, CORE_ADDR size, unsigned prot)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->infcall_mmap != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_infcall_mmap called\n");
return gdbarch->infcall_mmap (size, prot);
}
void
set_gdbarch_infcall_mmap (struct gdbarch *gdbarch,
gdbarch_infcall_mmap_ftype infcall_mmap)
{
gdbarch->infcall_mmap = infcall_mmap;
}
compile: Use also inferior munmap Currently inferior memory is allocated by inferior mmap() but it is never deallocated; despite the injected objfile incl. its symbols is freed. This was intentional so that one can do for example: inferior: char *str = "foo"; GDB: (gdb) compile code str = "bar"; I believe later patches will be needed to introduce full control over keeping vs. discarding the injected module as being discussed in: compile: objfiles lifetime UI https://sourceware.org/ml/gdb/2015-04/msg00051.html Message-ID: <20150429135735.GA16974@host1.jankratochvil.net> https://sourceware.org/ml/gdb/2015-05/msg00007.html As decided by Phil it is better not to leak inferior pages as users can workaround the issue above for example by: (gdb) compile code str = strdup ("bar"); I have checked that in fact gdb/doc/ (written by Phil) already expects the injected code will be unmapped so that does not need to be changed: compile code int ff = 5; p = &ff; In this example, @code{p} would point to @code{ff} when the @code{compile} command is executing the source code provided to it. However, as variables in the (example) program persist with their assigned values, the variable @code{p} would point to an invalid location when the command exists. gdb/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * arch-utils.c (default_infcall_munmap): New. * arch-utils.h (default_infcall_munmap): New declaration. * compile/compile-object-load.c (struct munmap_list, munmap_list_add) (munmap_list_free, munmap_listp_free_cleanup): New. (struct setup_sections_data): Add field munmap_list_headp. (setup_sections): Call munmap_list_add. (compile_object_load): New variable munmap_list_head, initialize setup_sections_data.munmap_list_headp, return munmap_list_head. * compile/compile-object-load.h (struct munmap_list): New declaration. (struct compile_module): Add field munmap_list_head. (munmap_list_free): New declaration. * compile/compile-object-run.c (struct do_module_cleanup): Add field munmap_list_head. (do_module_cleanup): Call munmap_list_free. (compile_object_run): Pass munmap_list_head to do_module_cleanup. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (infcall_munmap): New. * linux-tdep.c (linux_infcall_munmap): New. (linux_init_abi): Install it. gdb/testsuite/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.compile/compile.exp (keep jit in memory): Rename to ... (do not keep jit in memory): ... this. (expect 5): Change it to ... (expect no 5): ... this.
2015-06-04 03:22:56 +08:00
void
gdbarch_infcall_munmap (struct gdbarch *gdbarch, CORE_ADDR addr, CORE_ADDR size)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->infcall_munmap != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_infcall_munmap called\n");
gdbarch->infcall_munmap (addr, size);
}
void
set_gdbarch_infcall_munmap (struct gdbarch *gdbarch,
gdbarch_infcall_munmap_ftype infcall_munmap)
{
gdbarch->infcall_munmap = infcall_munmap;
}
char *
gdbarch_gcc_target_options (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->gcc_target_options != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_gcc_target_options called\n");
return gdbarch->gcc_target_options (gdbarch);
}
void
set_gdbarch_gcc_target_options (struct gdbarch *gdbarch,
gdbarch_gcc_target_options_ftype gcc_target_options)
{
gdbarch->gcc_target_options = gcc_target_options;
}
add gnu_triplet_regexp gdbarch method gdb has to inform libcc1.so of the target being used, so that the correct compiler can be invoked. The compiler is invoked using the GNU configury triplet prefix, e.g., "x86_64-unknown-linux-gnu-gcc". In order for this to work we need to map the gdbarch to the GNU configury triplet arch. In most cases these are identical; however, the x86 family poses some problems, as the BFD arch names are quite different from the GNU triplet names. So, we introduce a new gdbarch method for this. A regular expression is used because there are various valid values for the arch prefix in the triplet. This patch also updates the osabi code to associate a regular expression with the OS ABI. I have only added a concrete value for Linux. Note that the "-gnu" part is optional, at least on Fedora it is omitted from the installed GCC executable's name. gdb/ChangeLog 2014-12-12 Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * osabi.h (osabi_triplet_regexp): Declare. * osabi.c (struct osabi_names): New. (gdb_osabi_names): Change type to struct osabi_names. Update values. (gdbarch_osabi_name): Update. (osabi_triplet_regexp): New function. (osabi_from_tdesc_string, _initialize_gdb_osabi): Update. * i386-tdep.c (i386_gnu_triplet_regexp): New method. (i386_elf_init_abi, i386_go32_init_abi, i386_gdbarch_init): Call set_gdbarch_gnu_triplet_regexp. * gdbarch.sh (gnu_triplet_regexp): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_gnu_triplet_regexp): Declare. * arch-utils.c (default_gnu_triplet_regexp): New function.
2014-06-13 23:28:24 +08:00
const char *
gdbarch_gnu_triplet_regexp (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->gnu_triplet_regexp != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_gnu_triplet_regexp called\n");
return gdbarch->gnu_triplet_regexp (gdbarch);
}
void
set_gdbarch_gnu_triplet_regexp (struct gdbarch *gdbarch,
gdbarch_gnu_triplet_regexp_ftype gnu_triplet_regexp)
{
gdbarch->gnu_triplet_regexp = gnu_triplet_regexp;
}
int
gdbarch_addressable_memory_unit_size (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->addressable_memory_unit_size != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_addressable_memory_unit_size called\n");
return gdbarch->addressable_memory_unit_size (gdbarch);
}
void
set_gdbarch_addressable_memory_unit_size (struct gdbarch *gdbarch,
gdbarch_addressable_memory_unit_size_ftype addressable_memory_unit_size)
{
gdbarch->addressable_memory_unit_size = addressable_memory_unit_size;
}
GDB: Add support for the new set/show disassembler-options commands. This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-03-01 02:32:07 +08:00
char **
gdbarch_disassembler_options (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of disassembler_options, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_disassembler_options called\n");
return gdbarch->disassembler_options;
}
void
set_gdbarch_disassembler_options (struct gdbarch *gdbarch,
char ** disassembler_options)
{
gdbarch->disassembler_options = disassembler_options;
}
const disasm_options_t *
gdbarch_valid_disassembler_options (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
/* Skip verify of valid_disassembler_options, invalid_p == 0 */
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_valid_disassembler_options called\n");
return gdbarch->valid_disassembler_options;
}
void
set_gdbarch_valid_disassembler_options (struct gdbarch *gdbarch,
const disasm_options_t * valid_disassembler_options)
{
gdbarch->valid_disassembler_options = valid_disassembler_options;
}
ULONGEST
gdbarch_type_align (struct gdbarch *gdbarch, struct type *type)
{
gdb_assert (gdbarch != NULL);
gdb_assert (gdbarch->type_align != NULL);
if (gdbarch_debug >= 2)
fprintf_unfiltered (gdb_stdlog, "gdbarch_type_align called\n");
return gdbarch->type_align (gdbarch, type);
}
void
set_gdbarch_type_align (struct gdbarch *gdbarch,
gdbarch_type_align_ftype type_align)
{
gdbarch->type_align = type_align;
}
1999-06-15 02:08:47 +08:00
2000-11-30 11:30:52 +08:00
/* Keep a registry of per-architecture data-pointers required by GDB
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
modules. */
1999-06-15 02:08:47 +08:00
struct gdbarch_data
{
unsigned index;
int init_p;
2004-03-15 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (gdbarch_data_pre_init_fytpe) (gdbarch_data_register_pre_init, gdbarch_data_post_init_fytpe) (gdbarch_data_register_post_init): Replace gdbarch_data_init_ftype and register_gdbarch_data. (deprecated_set_gdbarch_data): Rename set_gdbarch_data. (struct gdbarch_data): Replace "init" by "pre_init" and "post_init". * gdbarch.h, gdbarch.c: Re-generate. * dwarf2-frame.c (dwarf2_frame_init): Replace "gdbarch" paramter with"obstack", use OBSTACK_ZALLOC. (dwarf2_frame_ops): Delete. (dwarf2_frame_set_init_reg): Use gdbarch_data. (dwarf2_frame_init_reg): Use gdbarch_data. (_initialize_dwarf2_frame): Use gdbarch_data_register_pre_init. * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets) (_initialize_svr4_solib): Update. * user-regs.c (_initialize_user_regs): Update. * reggroups.c (_initialize_reggroup): Update. * regcache.c (_initialize_regcache): Update. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Update. * libunwind-frame.c (_initialize_libunwind_frame): Update. * gnu-v3-abi.c (init_gnuv3_ops): Update. * frame-unwind.c (_initialize_frame_unwind): Update. * frame-base.c (_initialize_frame_base): Update. * user-regs.c (user_reg_add): Update. * reggroups.c (reggroup_add): Update. * mips-linux-tdep.c (set_mips_linux_register_addr): Update. * libunwind-frame.c (libunwind_frame_set_descr): Update. * frame-unwind.c (frame_unwind_append_sniffer): Update. * frame-base.c (frame_base_table): Update. * remote.c (_initialize_remote): Update. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Define.
2004-03-16 04:38:08 +08:00
gdbarch_data_pre_init_ftype *pre_init;
gdbarch_data_post_init_ftype *post_init;
1999-06-15 02:08:47 +08:00
};
struct gdbarch_data_registration
1999-07-20 07:30:11 +08:00
{
struct gdbarch_data *data;
struct gdbarch_data_registration *next;
};
1999-06-15 02:08:47 +08:00
2000-11-30 11:30:52 +08:00
struct gdbarch_data_registry
1999-07-20 07:30:11 +08:00
{
unsigned nr;
1999-07-20 07:30:11 +08:00
struct gdbarch_data_registration *registrations;
};
1999-06-15 02:08:47 +08:00
2000-11-30 11:30:52 +08:00
struct gdbarch_data_registry gdbarch_data_registry =
1999-06-15 02:08:47 +08:00
{
0, NULL,
};
2004-03-15 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (gdbarch_data_pre_init_fytpe) (gdbarch_data_register_pre_init, gdbarch_data_post_init_fytpe) (gdbarch_data_register_post_init): Replace gdbarch_data_init_ftype and register_gdbarch_data. (deprecated_set_gdbarch_data): Rename set_gdbarch_data. (struct gdbarch_data): Replace "init" by "pre_init" and "post_init". * gdbarch.h, gdbarch.c: Re-generate. * dwarf2-frame.c (dwarf2_frame_init): Replace "gdbarch" paramter with"obstack", use OBSTACK_ZALLOC. (dwarf2_frame_ops): Delete. (dwarf2_frame_set_init_reg): Use gdbarch_data. (dwarf2_frame_init_reg): Use gdbarch_data. (_initialize_dwarf2_frame): Use gdbarch_data_register_pre_init. * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets) (_initialize_svr4_solib): Update. * user-regs.c (_initialize_user_regs): Update. * reggroups.c (_initialize_reggroup): Update. * regcache.c (_initialize_regcache): Update. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Update. * libunwind-frame.c (_initialize_libunwind_frame): Update. * gnu-v3-abi.c (init_gnuv3_ops): Update. * frame-unwind.c (_initialize_frame_unwind): Update. * frame-base.c (_initialize_frame_base): Update. * user-regs.c (user_reg_add): Update. * reggroups.c (reggroup_add): Update. * mips-linux-tdep.c (set_mips_linux_register_addr): Update. * libunwind-frame.c (libunwind_frame_set_descr): Update. * frame-unwind.c (frame_unwind_append_sniffer): Update. * frame-base.c (frame_base_table): Update. * remote.c (_initialize_remote): Update. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Define.
2004-03-16 04:38:08 +08:00
static struct gdbarch_data *
gdbarch_data_register (gdbarch_data_pre_init_ftype *pre_init,
gdbarch_data_post_init_ftype *post_init)
1999-06-15 02:08:47 +08:00
{
struct gdbarch_data_registration **curr;
/* Append the new registration. */
2000-11-30 11:30:52 +08:00
for (curr = &gdbarch_data_registry.registrations;
1999-06-15 02:08:47 +08:00
(*curr) != NULL;
curr = &(*curr)->next);
replace XMALLOC with XNEW This replaces XMALLOC with XNEW, and removes XMALLOC. The only non-mechanical bit here was remembering to edit gdbarch.sh. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise.
2013-12-29 06:31:23 +08:00
(*curr) = XNEW (struct gdbarch_data_registration);
1999-06-15 02:08:47 +08:00
(*curr)->next = NULL;
replace XMALLOC with XNEW This replaces XMALLOC with XNEW, and removes XMALLOC. The only non-mechanical bit here was remembering to edit gdbarch.sh. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise.
2013-12-29 06:31:23 +08:00
(*curr)->data = XNEW (struct gdbarch_data);
2000-11-30 11:30:52 +08:00
(*curr)->data->index = gdbarch_data_registry.nr++;
2004-03-15 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (gdbarch_data_pre_init_fytpe) (gdbarch_data_register_pre_init, gdbarch_data_post_init_fytpe) (gdbarch_data_register_post_init): Replace gdbarch_data_init_ftype and register_gdbarch_data. (deprecated_set_gdbarch_data): Rename set_gdbarch_data. (struct gdbarch_data): Replace "init" by "pre_init" and "post_init". * gdbarch.h, gdbarch.c: Re-generate. * dwarf2-frame.c (dwarf2_frame_init): Replace "gdbarch" paramter with"obstack", use OBSTACK_ZALLOC. (dwarf2_frame_ops): Delete. (dwarf2_frame_set_init_reg): Use gdbarch_data. (dwarf2_frame_init_reg): Use gdbarch_data. (_initialize_dwarf2_frame): Use gdbarch_data_register_pre_init. * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets) (_initialize_svr4_solib): Update. * user-regs.c (_initialize_user_regs): Update. * reggroups.c (_initialize_reggroup): Update. * regcache.c (_initialize_regcache): Update. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Update. * libunwind-frame.c (_initialize_libunwind_frame): Update. * gnu-v3-abi.c (init_gnuv3_ops): Update. * frame-unwind.c (_initialize_frame_unwind): Update. * frame-base.c (_initialize_frame_base): Update. * user-regs.c (user_reg_add): Update. * reggroups.c (reggroup_add): Update. * mips-linux-tdep.c (set_mips_linux_register_addr): Update. * libunwind-frame.c (libunwind_frame_set_descr): Update. * frame-unwind.c (frame_unwind_append_sniffer): Update. * frame-base.c (frame_base_table): Update. * remote.c (_initialize_remote): Update. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Define.
2004-03-16 04:38:08 +08:00
(*curr)->data->pre_init = pre_init;
(*curr)->data->post_init = post_init;
(*curr)->data->init_p = 1;
1999-06-15 02:08:47 +08:00
return (*curr)->data;
}
2004-03-15 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (gdbarch_data_pre_init_fytpe) (gdbarch_data_register_pre_init, gdbarch_data_post_init_fytpe) (gdbarch_data_register_post_init): Replace gdbarch_data_init_ftype and register_gdbarch_data. (deprecated_set_gdbarch_data): Rename set_gdbarch_data. (struct gdbarch_data): Replace "init" by "pre_init" and "post_init". * gdbarch.h, gdbarch.c: Re-generate. * dwarf2-frame.c (dwarf2_frame_init): Replace "gdbarch" paramter with"obstack", use OBSTACK_ZALLOC. (dwarf2_frame_ops): Delete. (dwarf2_frame_set_init_reg): Use gdbarch_data. (dwarf2_frame_init_reg): Use gdbarch_data. (_initialize_dwarf2_frame): Use gdbarch_data_register_pre_init. * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets) (_initialize_svr4_solib): Update. * user-regs.c (_initialize_user_regs): Update. * reggroups.c (_initialize_reggroup): Update. * regcache.c (_initialize_regcache): Update. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Update. * libunwind-frame.c (_initialize_libunwind_frame): Update. * gnu-v3-abi.c (init_gnuv3_ops): Update. * frame-unwind.c (_initialize_frame_unwind): Update. * frame-base.c (_initialize_frame_base): Update. * user-regs.c (user_reg_add): Update. * reggroups.c (reggroup_add): Update. * mips-linux-tdep.c (set_mips_linux_register_addr): Update. * libunwind-frame.c (libunwind_frame_set_descr): Update. * frame-unwind.c (frame_unwind_append_sniffer): Update. * frame-base.c (frame_base_table): Update. * remote.c (_initialize_remote): Update. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Define.
2004-03-16 04:38:08 +08:00
struct gdbarch_data *
gdbarch_data_register_pre_init (gdbarch_data_pre_init_ftype *pre_init)
{
return gdbarch_data_register (pre_init, NULL);
}
struct gdbarch_data *
gdbarch_data_register_post_init (gdbarch_data_post_init_ftype *post_init)
{
return gdbarch_data_register (NULL, post_init);
}
1999-06-15 02:08:47 +08:00
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Create/delete the gdbarch data vector. */
static void
alloc_gdbarch_data (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch->data == NULL);
gdbarch->nr_data = gdbarch_data_registry.nr;
gdbarch->data = GDBARCH_OBSTACK_CALLOC (gdbarch, gdbarch->nr_data, void *);
1999-06-15 02:08:47 +08:00
}
/* Initialize the current value of the specified per-architecture
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
data-pointer. */
void
2004-03-15 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (gdbarch_data_pre_init_fytpe) (gdbarch_data_register_pre_init, gdbarch_data_post_init_fytpe) (gdbarch_data_register_post_init): Replace gdbarch_data_init_ftype and register_gdbarch_data. (deprecated_set_gdbarch_data): Rename set_gdbarch_data. (struct gdbarch_data): Replace "init" by "pre_init" and "post_init". * gdbarch.h, gdbarch.c: Re-generate. * dwarf2-frame.c (dwarf2_frame_init): Replace "gdbarch" paramter with"obstack", use OBSTACK_ZALLOC. (dwarf2_frame_ops): Delete. (dwarf2_frame_set_init_reg): Use gdbarch_data. (dwarf2_frame_init_reg): Use gdbarch_data. (_initialize_dwarf2_frame): Use gdbarch_data_register_pre_init. * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets) (_initialize_svr4_solib): Update. * user-regs.c (_initialize_user_regs): Update. * reggroups.c (_initialize_reggroup): Update. * regcache.c (_initialize_regcache): Update. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Update. * libunwind-frame.c (_initialize_libunwind_frame): Update. * gnu-v3-abi.c (init_gnuv3_ops): Update. * frame-unwind.c (_initialize_frame_unwind): Update. * frame-base.c (_initialize_frame_base): Update. * user-regs.c (user_reg_add): Update. * reggroups.c (reggroup_add): Update. * mips-linux-tdep.c (set_mips_linux_register_addr): Update. * libunwind-frame.c (libunwind_frame_set_descr): Update. * frame-unwind.c (frame_unwind_append_sniffer): Update. * frame-base.c (frame_base_table): Update. * remote.c (_initialize_remote): Update. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Define.
2004-03-16 04:38:08 +08:00
deprecated_set_gdbarch_data (struct gdbarch *gdbarch,
struct gdbarch_data *data,
void *pointer)
{
gdb_assert (data->index < gdbarch->nr_data);
gdb_assert (gdbarch->data[data->index] == NULL);
2004-03-15 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (gdbarch_data_pre_init_fytpe) (gdbarch_data_register_pre_init, gdbarch_data_post_init_fytpe) (gdbarch_data_register_post_init): Replace gdbarch_data_init_ftype and register_gdbarch_data. (deprecated_set_gdbarch_data): Rename set_gdbarch_data. (struct gdbarch_data): Replace "init" by "pre_init" and "post_init". * gdbarch.h, gdbarch.c: Re-generate. * dwarf2-frame.c (dwarf2_frame_init): Replace "gdbarch" paramter with"obstack", use OBSTACK_ZALLOC. (dwarf2_frame_ops): Delete. (dwarf2_frame_set_init_reg): Use gdbarch_data. (dwarf2_frame_init_reg): Use gdbarch_data. (_initialize_dwarf2_frame): Use gdbarch_data_register_pre_init. * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets) (_initialize_svr4_solib): Update. * user-regs.c (_initialize_user_regs): Update. * reggroups.c (_initialize_reggroup): Update. * regcache.c (_initialize_regcache): Update. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Update. * libunwind-frame.c (_initialize_libunwind_frame): Update. * gnu-v3-abi.c (init_gnuv3_ops): Update. * frame-unwind.c (_initialize_frame_unwind): Update. * frame-base.c (_initialize_frame_base): Update. * user-regs.c (user_reg_add): Update. * reggroups.c (reggroup_add): Update. * mips-linux-tdep.c (set_mips_linux_register_addr): Update. * libunwind-frame.c (libunwind_frame_set_descr): Update. * frame-unwind.c (frame_unwind_append_sniffer): Update. * frame-base.c (frame_base_table): Update. * remote.c (_initialize_remote): Update. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Define.
2004-03-16 04:38:08 +08:00
gdb_assert (data->pre_init == NULL);
gdbarch->data[data->index] = pointer;
}
1999-06-15 02:08:47 +08:00
/* Return the current value of the specified per-architecture
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
data-pointer. */
1999-06-15 02:08:47 +08:00
void *
gdbarch_data (struct gdbarch *gdbarch, struct gdbarch_data *data)
1999-06-15 02:08:47 +08:00
{
gdb_assert (data->index < gdbarch->nr_data);
2004-03-15 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (gdbarch_data_pre_init_fytpe) (gdbarch_data_register_pre_init, gdbarch_data_post_init_fytpe) (gdbarch_data_register_post_init): Replace gdbarch_data_init_ftype and register_gdbarch_data. (deprecated_set_gdbarch_data): Rename set_gdbarch_data. (struct gdbarch_data): Replace "init" by "pre_init" and "post_init". * gdbarch.h, gdbarch.c: Re-generate. * dwarf2-frame.c (dwarf2_frame_init): Replace "gdbarch" paramter with"obstack", use OBSTACK_ZALLOC. (dwarf2_frame_ops): Delete. (dwarf2_frame_set_init_reg): Use gdbarch_data. (dwarf2_frame_init_reg): Use gdbarch_data. (_initialize_dwarf2_frame): Use gdbarch_data_register_pre_init. * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets) (_initialize_svr4_solib): Update. * user-regs.c (_initialize_user_regs): Update. * reggroups.c (_initialize_reggroup): Update. * regcache.c (_initialize_regcache): Update. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Update. * libunwind-frame.c (_initialize_libunwind_frame): Update. * gnu-v3-abi.c (init_gnuv3_ops): Update. * frame-unwind.c (_initialize_frame_unwind): Update. * frame-base.c (_initialize_frame_base): Update. * user-regs.c (user_reg_add): Update. * reggroups.c (reggroup_add): Update. * mips-linux-tdep.c (set_mips_linux_register_addr): Update. * libunwind-frame.c (libunwind_frame_set_descr): Update. * frame-unwind.c (frame_unwind_append_sniffer): Update. * frame-base.c (frame_base_table): Update. * remote.c (_initialize_remote): Update. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Define.
2004-03-16 04:38:08 +08:00
if (gdbarch->data[data->index] == NULL)
{
2004-03-15 Andrew Cagney <cagney@redhat.com> * gdbarch.sh (gdbarch_data_pre_init_fytpe) (gdbarch_data_register_pre_init, gdbarch_data_post_init_fytpe) (gdbarch_data_register_post_init): Replace gdbarch_data_init_ftype and register_gdbarch_data. (deprecated_set_gdbarch_data): Rename set_gdbarch_data. (struct gdbarch_data): Replace "init" by "pre_init" and "post_init". * gdbarch.h, gdbarch.c: Re-generate. * dwarf2-frame.c (dwarf2_frame_init): Replace "gdbarch" paramter with"obstack", use OBSTACK_ZALLOC. (dwarf2_frame_ops): Delete. (dwarf2_frame_set_init_reg): Use gdbarch_data. (dwarf2_frame_init_reg): Use gdbarch_data. (_initialize_dwarf2_frame): Use gdbarch_data_register_pre_init. * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets) (_initialize_svr4_solib): Update. * user-regs.c (_initialize_user_regs): Update. * reggroups.c (_initialize_reggroup): Update. * regcache.c (_initialize_regcache): Update. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Update. * libunwind-frame.c (_initialize_libunwind_frame): Update. * gnu-v3-abi.c (init_gnuv3_ops): Update. * frame-unwind.c (_initialize_frame_unwind): Update. * frame-base.c (_initialize_frame_base): Update. * user-regs.c (user_reg_add): Update. * reggroups.c (reggroup_add): Update. * mips-linux-tdep.c (set_mips_linux_register_addr): Update. * libunwind-frame.c (libunwind_frame_set_descr): Update. * frame-unwind.c (frame_unwind_append_sniffer): Update. * frame-base.c (frame_base_table): Update. * remote.c (_initialize_remote): Update. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Define.
2004-03-16 04:38:08 +08:00
/* The data-pointer isn't initialized, call init() to get a
value. */
if (data->pre_init != NULL)
/* Mid architecture creation: pass just the obstack, and not
the entire architecture, as that way it isn't possible for
pre-init code to refer to undefined architecture
fields. */
gdbarch->data[data->index] = data->pre_init (gdbarch->obstack);
else if (gdbarch->initialized_p
&& data->post_init != NULL)
/* Post architecture creation: pass the entire architecture
(as all fields are valid), but be careful to also detect
recursive references. */
{
gdb_assert (data->init_p);
data->init_p = 0;
gdbarch->data[data->index] = data->post_init (gdbarch);
data->init_p = 1;
}
else
/* The architecture initialization hasn't completed - punt -
hope that the caller knows what they are doing. Once
deprecated_set_gdbarch_data has been initialized, this can be
changed to an internal error. */
return NULL;
gdb_assert (gdbarch->data[data->index] != NULL);
}
return gdbarch->data[data->index];
1999-06-15 02:08:47 +08:00
}
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Keep a registry of the architectures known by GDB. */
1999-06-15 02:08:47 +08:00
struct gdbarch_registration
1999-06-15 02:08:47 +08:00
{
enum bfd_architecture bfd_architecture;
gdbarch_init_ftype *init;
gdbarch_dump_tdep_ftype *dump_tdep;
1999-06-15 02:08:47 +08:00
struct gdbarch_list *arches;
struct gdbarch_registration *next;
1999-06-15 02:08:47 +08:00
};
2000-11-30 11:30:52 +08:00
static struct gdbarch_registration *gdbarch_registry = NULL;
1999-06-15 02:08:47 +08:00
static void
append_name (const char ***buf, int *nr, const char *name)
{
*buf = XRESIZEVEC (const char *, *buf, *nr + 1);
(*buf)[*nr] = name;
*nr += 1;
}
const char **
gdbarch_printable_names (void)
{
/* Accumulate a list of names based on the registed list of
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
architectures. */
int nr_arches = 0;
const char **arches = NULL;
struct gdbarch_registration *rego;
for (rego = gdbarch_registry;
rego != NULL;
rego = rego->next)
{
const struct bfd_arch_info *ap;
ap = bfd_lookup_arch (rego->bfd_architecture, 0);
if (ap == NULL)
internal_error (__FILE__, __LINE__,
2005-02-11 Andrew Cagney <cagney@gnu.org> Mark up error_no_arg, query, perror_with_name, complaint, and internal_error. * breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update. * cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update. * dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update. * exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update. * frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update. * gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update. * go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update. * i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update. * i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update. * infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update. * interps.c, language.c, linespec.c, linux-nat.c: Update. * m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update. * m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update. * macrotab.c, maint.c, mdebugread.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update. * mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update. * objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update. * parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update. * ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update. * regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update. * remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update. * s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update. * sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update. * solib-aix5.c, solib-svr4.c, solib.c, source.c: Update. * sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update. * symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update. * utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update. * win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update. * cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update. * cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update. * mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update. * tui/tui-file.c, tui/tui-interp.c: Update.
2005-02-12 02:13:55 +08:00
_("gdbarch_architecture_names: multi-arch unknown"));
do
{
append_name (&arches, &nr_arches, ap->printable_name);
ap = ap->next;
}
while (ap != NULL);
}
append_name (&arches, &nr_arches, NULL);
return arches;
}
1999-06-15 02:08:47 +08:00
void
gdbarch_register (enum bfd_architecture bfd_architecture,
gdbarch_init_ftype *init,
gdbarch_dump_tdep_ftype *dump_tdep)
1999-06-15 02:08:47 +08:00
{
struct gdbarch_registration **curr;
1999-06-15 02:08:47 +08:00
const struct bfd_arch_info *bfd_arch_info;
/* Check that BFD recognizes this architecture */
1999-06-15 02:08:47 +08:00
bfd_arch_info = bfd_lookup_arch (bfd_architecture, 0);
if (bfd_arch_info == NULL)
{
internal_error (__FILE__, __LINE__,
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
_("gdbarch: Attempt to register "
"unknown architecture (%d)"),
bfd_architecture);
1999-06-15 02:08:47 +08:00
}
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Check that we haven't seen this architecture before. */
2000-11-30 11:30:52 +08:00
for (curr = &gdbarch_registry;
1999-06-15 02:08:47 +08:00
(*curr) != NULL;
curr = &(*curr)->next)
{
if (bfd_architecture == (*curr)->bfd_architecture)
internal_error (__FILE__, __LINE__,
_("gdbarch: Duplicate registration "
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
"of architecture (%s)"),
bfd_arch_info->printable_name);
1999-06-15 02:08:47 +08:00
}
/* log it */
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "register_gdbarch_init (%s, %s)\n",
1999-06-15 02:08:47 +08:00
bfd_arch_info->printable_name,
host_address_to_string (init));
1999-06-15 02:08:47 +08:00
/* Append it */
replace XMALLOC with XNEW This replaces XMALLOC with XNEW, and removes XMALLOC. The only non-mechanical bit here was remembering to edit gdbarch.sh. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise.
2013-12-29 06:31:23 +08:00
(*curr) = XNEW (struct gdbarch_registration);
1999-06-15 02:08:47 +08:00
(*curr)->bfd_architecture = bfd_architecture;
(*curr)->init = init;
(*curr)->dump_tdep = dump_tdep;
1999-06-15 02:08:47 +08:00
(*curr)->arches = NULL;
(*curr)->next = NULL;
}
void
register_gdbarch_init (enum bfd_architecture bfd_architecture,
gdbarch_init_ftype *init)
{
gdbarch_register (bfd_architecture, init, NULL);
1999-06-15 02:08:47 +08:00
}
/* Look for an architecture using gdbarch_info. */
1999-06-15 02:08:47 +08:00
struct gdbarch_list *
1999-08-31 09:14:27 +08:00
gdbarch_list_lookup_by_info (struct gdbarch_list *arches,
const struct gdbarch_info *info)
1999-06-15 02:08:47 +08:00
{
for (; arches != NULL; arches = arches->next)
{
if (info->bfd_arch_info != arches->gdbarch->bfd_arch_info)
continue;
if (info->byte_order != arches->gdbarch->byte_order)
continue;
if (info->osabi != arches->gdbarch->osabi)
continue;
if (info->target_desc != arches->gdbarch->target_desc)
continue;
1999-06-15 02:08:47 +08:00
return arches;
}
return NULL;
}
/* Find an architecture that matches the specified INFO. Create a new
architecture if needed. Return that new architecture. */
1999-06-15 02:08:47 +08:00
struct gdbarch *
gdbarch_find_by_info (struct gdbarch_info info)
1999-06-15 02:08:47 +08:00
{
struct gdbarch *new_gdbarch;
struct gdbarch_registration *rego;
1999-06-15 02:08:47 +08:00
/* Fill in missing parts of the INFO struct using a number of
sources: "set ..."; INFOabfd supplied; and the global
defaults. */
gdbarch_info_fill (&info);
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-08 03:36:19 +08:00
/* Must have found some sort of architecture. */
gdb_assert (info.bfd_arch_info != NULL);
1999-06-15 02:08:47 +08:00
if (gdbarch_debug)
{
fprintf_unfiltered (gdb_stdlog,
"gdbarch_find_by_info: info.bfd_arch_info %s\n",
1999-06-15 02:08:47 +08:00
(info.bfd_arch_info != NULL
? info.bfd_arch_info->printable_name
: "(null)"));
fprintf_unfiltered (gdb_stdlog,
"gdbarch_find_by_info: info.byte_order %d (%s)\n",
1999-06-15 02:08:47 +08:00
info.byte_order,
2002-01-05 12:30:46 +08:00
(info.byte_order == BFD_ENDIAN_BIG ? "big"
2001-12-16 00:53:24 +08:00
: info.byte_order == BFD_ENDIAN_LITTLE ? "little"
1999-06-15 02:08:47 +08:00
: "default"));
fprintf_unfiltered (gdb_stdlog,
"gdbarch_find_by_info: info.osabi %d (%s)\n",
info.osabi, gdbarch_osabi_name (info.osabi));
1999-06-15 02:08:47 +08:00
fprintf_unfiltered (gdb_stdlog,
"gdbarch_find_by_info: info.abfd %s\n",
host_address_to_string (info.abfd));
1999-06-15 02:08:47 +08:00
fprintf_unfiltered (gdb_stdlog,
"gdbarch_find_by_info: info.tdep_info %s\n",
host_address_to_string (info.tdep_info));
1999-06-15 02:08:47 +08:00
}
/* Find the tdep code that knows about this architecture. */
for (rego = gdbarch_registry;
rego != NULL;
rego = rego->next)
if (rego->bfd_architecture == info.bfd_arch_info->arch)
break;
if (rego == NULL)
{
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
"No matching architecture\n");
return 0;
}
/* Ask the tdep code for an architecture that matches "info". */
1999-06-15 02:08:47 +08:00
new_gdbarch = rego->init (info, rego->arches);
/* Did the tdep code like it? No. Reject the change and revert to
the old architecture. */
1999-06-15 02:08:47 +08:00
if (new_gdbarch == NULL)
{
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
"Target rejected architecture\n");
return NULL;
1999-06-15 02:08:47 +08:00
}
/* Is this a pre-existing architecture (as determined by already
being initialized)? Move it to the front of the architecture
list (keeping the list sorted Most Recently Used). */
if (new_gdbarch->initialized_p)
1999-06-15 02:08:47 +08:00
{
struct gdbarch_list **list;
struct gdbarch_list *self;
1999-06-15 02:08:47 +08:00
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
"Previous architecture %s (%s) selected\n",
host_address_to_string (new_gdbarch),
1999-06-15 02:08:47 +08:00
new_gdbarch->bfd_arch_info->printable_name);
/* Find the existing arch in the list. */
for (list = &rego->arches;
(*list) != NULL && (*list)->gdbarch != new_gdbarch;
list = &(*list)->next);
/* It had better be in the list of architectures. */
gdb_assert ((*list) != NULL && (*list)->gdbarch == new_gdbarch);
/* Unlink SELF. */
self = (*list);
(*list) = self->next;
/* Insert SELF at the front. */
self->next = rego->arches;
rego->arches = self;
/* Return it. */
return new_gdbarch;
1999-06-15 02:08:47 +08:00
}
/* It's a new architecture. */
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
"New architecture %s (%s) selected\n",
host_address_to_string (new_gdbarch),
new_gdbarch->bfd_arch_info->printable_name);
/* Insert the new architecture into the front of the architecture
list (keep the list sorted Most Recently Used). */
{
struct gdbarch_list *self = XNEW (struct gdbarch_list);
self->next = rego->arches;
self->gdbarch = new_gdbarch;
rego->arches = self;
}
1999-06-15 02:08:47 +08:00
/* Check that the newly installed architecture is valid. Plug in
any post init values. */
new_gdbarch->dump_tdep = rego->dump_tdep;
1999-06-15 02:08:47 +08:00
verify_gdbarch (new_gdbarch);
new_gdbarch->initialized_p = 1;
1999-06-15 02:08:47 +08:00
if (gdbarch_debug)
gdbarch_dump (new_gdbarch, gdb_stdlog);
return new_gdbarch;
1999-06-15 02:08:47 +08:00
}
/* Make the specified architecture current. */
void
set_target_gdbarch (struct gdbarch *new_gdbarch)
{
gdb_assert (new_gdbarch != NULL);
gdb_assert (new_gdbarch->initialized_p);
gdb/ 2012-11-09 Pedro Alves <palves@redhat.com> * gdbarch.sh (target_gdbarch) <gdbarch.h>: Reimplement as macro. (get_target_gdbarch) <gdbarch.h>: New function. (startup_gdbarch) <gdbarch.h>: Declare. <gdbarch.c> (target_gdbarch): Delete. <gdbarch.c> (deprecated_target_gdbarch_select_hack): Set the current inferior's gdbarch. <gdbarch.c> (get_target_gdbarch): New function. * inferior.c: Include target-descriptions.h. (free_inferior): Free target description info. (add_inferior_with_spaces): Set the inferior's initial architecture. (clone_inferior_command): Copy the original inferior's target description if it was user specified. (initialize_inferiors): Add comment. * inferior.h (struct target_desc_info): Forward declare. (struct inferior) <gdbarch>: New field. * linux-nat.c: Include target-descriptions.h. (linux_child_follow_fork): Copy the parent's architecture and target description to the child. * target-descriptions.c: Include inferior.h. (struct target_desc_info): New structure, holding the equivalents of ... (target_desc_fetched, current_target_desc) (target_description_filename): ... these removed globals. (get_tdesc_info, target_desc_info_from_user_p) (copy_inferior_target_desc_info, target_desc_info_free): New. (target_desc_fetched, current_target_desc) (target_description_filename): Reimplemented as convenience macros. (tdesc_filename_cmd_string): New global. (set_tdesc_filename_cmd): Copy the string manipulated by the "set tdescs filename ..." commands to the per-inferior equivalent. (show_tdesc_filename_cmd): Get the value to show from the per-inferior description filename. (_initilize_target_descriptions): Change the "set/show tdesc filename" commands' variable. * target-descriptions.h (struct target_desc, struct target_desc_info) (struct inferior): Forward declare. (target_find_description, target_clear_description) (target_current_description): Adjust comments. (copy_inferior_target_desc_info, target_desc_info_free) (target_desc_info_from_user_p). Declare. gdb/testsuite/ 2012-11-09 Pedro Alves <palves@redhat.com> * gdb.multi/multi-arch.exp: New.
2012-11-09 09:47:20 +08:00
current_inferior ()->gdbarch = new_gdbarch;
Convert observers to C++ This converts observers from using a special source-generating script to be plain C++. This version of the patch takes advantage of C++11 by using std::function and variadic templates; incorporates Pedro's patches; and renames the header file to "observable.h" (this change eliminates the need for a clean rebuild). Note that Pedro's patches used a template lambda in tui-hooks.c, but this failed to compile on some buildbot instances (presumably due to differing C++ versions); I replaced this with an ordinary template function. Regression tested on the buildbot. gdb/ChangeLog 2018-03-19 Pedro Alves <palves@redhat.com> Tom Tromey <tom@tromey.com> * unittests/observable-selftests.c: New file. * common/observable.h: New file. * observable.h: New file. * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c, arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c, breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c, corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c, extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c, infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c, linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c, mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c, ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c, python/py-breakpoint.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c, record-btrace.c, record-full.c, record.c, regcache.c, remote.c, riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c, spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c, symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c, tui/tui-interp.c, valops.c: Update all users. * tui/tui-hooks.c (tui_bp_created_observer) (tui_bp_deleted_observer, tui_bp_modified_observer) (tui_inferior_exit_observer, tui_before_prompt_observer) (tui_normal_stop_observer, tui_register_changed_observer): Remove. (tui_observers_token): New global. (attach_or_detach, tui_attach_detach_observers): New functions. (tui_install_hooks, tui_remove_hooks): Use tui_attach_detach_observers. * record-btrace.c (record_btrace_thread_observer): Remove. (record_btrace_thread_observer_token): New global. * observer.sh: Remove. * observer.c: Rename to observable.c. * observable.c (namespace gdb_observers): Define new objects. (observer_debug): Move into gdb_observers namespace. (struct observer, struct observer_list, xalloc_observer_list_node) (xfree_observer_list_node, generic_observer_attach) (generic_observer_detach, generic_observer_notify): Remove. (_initialize_observer): Update. Don't include observer.inc. * Makefile.in (generated_files): Remove observer.h, observer.inc. (clean mostlyclean): Likewise. (observer.h, observer.inc): Remove targets. (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c. (COMMON_SFILES): Use observable.c, not observer.c. * .gitignore: Remove observer.h. gdb/doc/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * observer.texi: Remove. gdb/testsuite/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * gdb.gdb/observer.exp: Remove.
2016-10-03 00:50:20 +08:00
gdb::observers::architecture_changed.notify (new_gdbarch);
registers_changed ();
}
/* Return the current inferior's arch. */
gdb/ 2012-11-09 Pedro Alves <palves@redhat.com> * gdbarch.sh (target_gdbarch) <gdbarch.h>: Reimplement as macro. (get_target_gdbarch) <gdbarch.h>: New function. (startup_gdbarch) <gdbarch.h>: Declare. <gdbarch.c> (target_gdbarch): Delete. <gdbarch.c> (deprecated_target_gdbarch_select_hack): Set the current inferior's gdbarch. <gdbarch.c> (get_target_gdbarch): New function. * inferior.c: Include target-descriptions.h. (free_inferior): Free target description info. (add_inferior_with_spaces): Set the inferior's initial architecture. (clone_inferior_command): Copy the original inferior's target description if it was user specified. (initialize_inferiors): Add comment. * inferior.h (struct target_desc_info): Forward declare. (struct inferior) <gdbarch>: New field. * linux-nat.c: Include target-descriptions.h. (linux_child_follow_fork): Copy the parent's architecture and target description to the child. * target-descriptions.c: Include inferior.h. (struct target_desc_info): New structure, holding the equivalents of ... (target_desc_fetched, current_target_desc) (target_description_filename): ... these removed globals. (get_tdesc_info, target_desc_info_from_user_p) (copy_inferior_target_desc_info, target_desc_info_free): New. (target_desc_fetched, current_target_desc) (target_description_filename): Reimplemented as convenience macros. (tdesc_filename_cmd_string): New global. (set_tdesc_filename_cmd): Copy the string manipulated by the "set tdescs filename ..." commands to the per-inferior equivalent. (show_tdesc_filename_cmd): Get the value to show from the per-inferior description filename. (_initilize_target_descriptions): Change the "set/show tdesc filename" commands' variable. * target-descriptions.h (struct target_desc, struct target_desc_info) (struct inferior): Forward declare. (target_find_description, target_clear_description) (target_current_description): Adjust comments. (copy_inferior_target_desc_info, target_desc_info_free) (target_desc_info_from_user_p). Declare. gdb/testsuite/ 2012-11-09 Pedro Alves <palves@redhat.com> * gdb.multi/multi-arch.exp: New.
2012-11-09 09:47:20 +08:00
struct gdbarch *
target_gdbarch (void)
gdb/ 2012-11-09 Pedro Alves <palves@redhat.com> * gdbarch.sh (target_gdbarch) <gdbarch.h>: Reimplement as macro. (get_target_gdbarch) <gdbarch.h>: New function. (startup_gdbarch) <gdbarch.h>: Declare. <gdbarch.c> (target_gdbarch): Delete. <gdbarch.c> (deprecated_target_gdbarch_select_hack): Set the current inferior's gdbarch. <gdbarch.c> (get_target_gdbarch): New function. * inferior.c: Include target-descriptions.h. (free_inferior): Free target description info. (add_inferior_with_spaces): Set the inferior's initial architecture. (clone_inferior_command): Copy the original inferior's target description if it was user specified. (initialize_inferiors): Add comment. * inferior.h (struct target_desc_info): Forward declare. (struct inferior) <gdbarch>: New field. * linux-nat.c: Include target-descriptions.h. (linux_child_follow_fork): Copy the parent's architecture and target description to the child. * target-descriptions.c: Include inferior.h. (struct target_desc_info): New structure, holding the equivalents of ... (target_desc_fetched, current_target_desc) (target_description_filename): ... these removed globals. (get_tdesc_info, target_desc_info_from_user_p) (copy_inferior_target_desc_info, target_desc_info_free): New. (target_desc_fetched, current_target_desc) (target_description_filename): Reimplemented as convenience macros. (tdesc_filename_cmd_string): New global. (set_tdesc_filename_cmd): Copy the string manipulated by the "set tdescs filename ..." commands to the per-inferior equivalent. (show_tdesc_filename_cmd): Get the value to show from the per-inferior description filename. (_initilize_target_descriptions): Change the "set/show tdesc filename" commands' variable. * target-descriptions.h (struct target_desc, struct target_desc_info) (struct inferior): Forward declare. (target_find_description, target_clear_description) (target_current_description): Adjust comments. (copy_inferior_target_desc_info, target_desc_info_free) (target_desc_info_from_user_p). Declare. gdb/testsuite/ 2012-11-09 Pedro Alves <palves@redhat.com> * gdb.multi/multi-arch.exp: New.
2012-11-09 09:47:20 +08:00
{
return current_inferior ()->gdbarch;
}
void
_initialize_gdbarch (void)
{
gdb/ * dwarf2loc.c (entry_values_debug): Add 'unsigned'. (_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * dwarf2loc.h: Update the declaration of 'entry_values_debug'. * dwarf2read.c (dwarf2_die_debug): Add 'unsigned'. (_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'. (_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.c (frame_debug): Add 'unsigned'. (_intialize_frame): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.h: Update the declaration of 'frame_debug'. * gdbtypes.c (overload_debug): Add 'unsigned'. (_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * inferior.h: Update declaration of 'debug_infrun'. * infrun.c (debug_infrun): Add 'unsigned'. (_initialize_infrun): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * jit.c (jit_debug): Add 'unsigned'. (_initialize_jit): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-nat.c (debug_linux_nat): Add 'unsigned'. (_initialize_linux_nat): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-thread-db.c (libthread_db_debug): Add 'unsigned'. (_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * machoread.c (mach_o_debug_level): Add 'unsigned'. (_initialize_machoread): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'. * microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'. (_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd intead of add_setshow_zinteger_cmd. * mips-tdep.c (mips_debug): Add 'unsigned'. (_initialize_mips_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * monitor.c (monitor_debug): Add 'unsigned'. (_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * observer.c (observer_debug): Add 'unsigned'. (_initialize_observer): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * parse.c (expressiondebug): Add 'unsigned'. (_initialize_parse): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.c (record_debug): Add 'unsigned'. (_initialize_record): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.h: Update the declaration of 'record_debug'. * stap-probe.c (stap_expression_debug): Add 'unsigned'. (_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * serial.c (global_serial_debug_p): Add 'unsigned'. (_initialize_serial): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'. (_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-frv.c (solib_frv_debug): Add 'unsigned'. (_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * target.c (targetdebug): Add 'unsigned'. (initialize_targets): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * valops.c (overload_debug): Add 'unsigned'. * varobj.c (varobjdebug): Add 'unsigned'. (_initialize_varobj): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'. (_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * arch-utils.h: Remove the declaration of 'gdbarch_debug'. * gdbarch.sh (gdbarch_debug): Add 'unsigned'. (extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * gdbarch.c, gdbarch.h: Re-generated.
2012-08-02 17:36:40 +08:00
add_setshow_zuinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\
Set architecture debugging."), _("\
Show architecture debugging."), _("\
When non-zero, architecture debugging is enabled."),
NULL,
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 21:51:36 +08:00
show_gdbarch_debug,
&setdebuglist, &showdebuglist);
}