binutils-gdb/sim/h8300/compile.c

4852 lines
114 KiB
C
Raw Normal View History

/*
* Simulator for the Renesas (formerly Hitachi) H8/300 architecture.
*
* Written by Steve Chamberlain of Cygnus Support. sac@cygnus.com
*
* This file is part of H8/300 sim
*
*
* THIS SOFTWARE IS NOT COPYRIGHTED
*
* Cygnus offers the following for use in the public domain. Cygnus makes no
* warranty with regard to the software or its performance and the user
* accepts the software "AS IS" with all faults.
*
* CYGNUS DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD TO THIS
* SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#include "config.h"
#include <signal.h>
#include <time.h>
#include <stdlib.h>
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#include "bfd.h"
#include "sim-main.h"
#include "gdb/sim-h8300.h"
#include "sys/stat.h"
#include "sys/types.h"
#include "sim-options.h"
#ifndef SIGTRAP
# define SIGTRAP 5
#endif
int debug;
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
static int memory_size;
#define X(op, size) (op * 4 + size)
#define SP (h8300hmode && !h8300_normal_mode ? SL : SW)
#define h8_opcodes ops
#define DEFINE_TABLE
#include "opcode/h8300.h"
/* CPU data object: */
static unsigned int
h8_get_pc (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> pc;
}
1999-04-27 02:34:20 +08:00
static void
h8_set_pc (SIM_DESC sd, unsigned int val)
{
(STATE_CPU (sd, 0)) -> pc = val;
}
2002-05-18 03:19:24 +08:00
static unsigned int
h8_get_ccr (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[CCR_REGNUM];
}
static void
h8_set_ccr (SIM_DESC sd, unsigned int val)
{
(STATE_CPU (sd, 0)) -> regs[CCR_REGNUM] = val;
}
static unsigned int
h8_get_exr (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[EXR_REGNUM];
}
static void
h8_set_exr (SIM_DESC sd, unsigned int val)
{
(STATE_CPU (sd, 0)) -> regs[EXR_REGNUM] = val;
}
static int
h8_get_sbr (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[SBR_REGNUM];
}
static void
h8_set_sbr (SIM_DESC sd, int val)
{
(STATE_CPU (sd, 0)) -> regs[SBR_REGNUM] = val;
}
static int
h8_get_vbr (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[VBR_REGNUM];
}
static void
h8_set_vbr (SIM_DESC sd, int val)
{
(STATE_CPU (sd, 0)) -> regs[VBR_REGNUM] = val;
}
static int
h8_get_mask (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> mask;
}
static void
h8_set_mask (SIM_DESC sd, int val)
{
(STATE_CPU (sd, 0)) -> mask = val;
}
#if 0
static int
h8_get_exception (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> exception;
}
static void
h8_set_exception (SIM_DESC sd, int val)
{
(STATE_CPU (sd, 0)) -> exception = val;
}
static enum h8300_sim_state
h8_get_state (SIM_DESC sd)
{
return sd -> state;
}
static void
h8_set_state (SIM_DESC sd, enum h8300_sim_state val)
{
sd -> state = val;
}
#endif
static unsigned int
h8_get_cycles (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[CYCLE_REGNUM];
}
static void
h8_set_cycles (SIM_DESC sd, unsigned int val)
{
(STATE_CPU (sd, 0)) -> regs[CYCLE_REGNUM] = val;
}
static unsigned int
h8_get_insts (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[INST_REGNUM];
}
static void
h8_set_insts (SIM_DESC sd, unsigned int val)
{
(STATE_CPU (sd, 0)) -> regs[INST_REGNUM] = val;
}
static unsigned int
h8_get_ticks (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[TICK_REGNUM];
}
static void
h8_set_ticks (SIM_DESC sd, unsigned int val)
{
(STATE_CPU (sd, 0)) -> regs[TICK_REGNUM] = val;
}
static unsigned int
h8_get_mach (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[MACH_REGNUM];
}
static void
h8_set_mach (SIM_DESC sd, unsigned int val)
{
(STATE_CPU (sd, 0)) -> regs[MACH_REGNUM] = val;
}
static unsigned int
h8_get_macl (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> regs[MACL_REGNUM];
}
static void
h8_set_macl (SIM_DESC sd, unsigned int val)
{
(STATE_CPU (sd, 0)) -> regs[MACL_REGNUM] = val;
}
static unsigned int *
h8_get_reg_buf (SIM_DESC sd)
{
return &(((STATE_CPU (sd, 0)) -> regs)[0]);
}
static unsigned int
h8_get_reg (SIM_DESC sd, int regnum)
{
return (STATE_CPU (sd, 0)) -> regs[regnum];
}
static void
h8_set_reg (SIM_DESC sd, int regnum, int val)
{
(STATE_CPU (sd, 0)) -> regs[regnum] = val;
}
#ifdef ADEBUG
static int
h8_get_stats (SIM_DESC sd, int idx)
{
return sd -> stats[idx];
}
static void
h8_increment_stats (SIM_DESC sd, int idx)
{
sd -> stats[idx] ++;
}
#endif /* ADEBUG */
static unsigned char *
h8_get_memory_buf (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> memory;
}
static void
h8_set_memory_buf (SIM_DESC sd, unsigned char *ptr)
{
(STATE_CPU (sd, 0)) -> memory = ptr;
}
static unsigned char
h8_get_memory (SIM_DESC sd, int idx)
{
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
ASSERT (idx < memory_size);
return (STATE_CPU (sd, 0)) -> memory[idx];
}
static void
h8_set_memory (SIM_DESC sd, int idx, unsigned int val)
{
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
ASSERT (idx < memory_size);
(STATE_CPU (sd, 0)) -> memory[idx] = (unsigned char) val;
}
static unsigned int
h8_get_delayed_branch (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> delayed_branch;
}
static void
h8_set_delayed_branch (SIM_DESC sd, unsigned int dest)
{
(STATE_CPU (sd, 0)) -> delayed_branch = dest;
}
static char **
h8_get_command_line (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> command_line;
}
static void
h8_set_command_line (SIM_DESC sd, char ** val)
{
(STATE_CPU (sd, 0)) -> command_line = val;
}
static char *
h8_get_cmdline_arg (SIM_DESC sd, int index)
{
return (STATE_CPU (sd, 0)) -> command_line[index];
}
static void
h8_set_cmdline_arg (SIM_DESC sd, int index, char * val)
{
(STATE_CPU (sd, 0)) -> command_line[index] = val;
}
/* MAC Saturation Mode */
static int
h8_get_macS (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> macS;
}
static void
h8_set_macS (SIM_DESC sd, int val)
{
(STATE_CPU (sd, 0)) -> macS = (val != 0);
}
/* MAC Zero Flag */
static int
h8_get_macZ (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> macZ;
}
static void
h8_set_macZ (SIM_DESC sd, int val)
{
(STATE_CPU (sd, 0)) -> macZ = (val != 0);
}
/* MAC Negative Flag */
static int
h8_get_macN (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> macN;
}
static void
h8_set_macN (SIM_DESC sd, int val)
{
(STATE_CPU (sd, 0)) -> macN = (val != 0);
}
/* MAC Overflow Flag */
static int
h8_get_macV (SIM_DESC sd)
{
return (STATE_CPU (sd, 0)) -> macV;
}
static void
h8_set_macV (SIM_DESC sd, int val)
{
(STATE_CPU (sd, 0)) -> macV = (val != 0);
}
/* End CPU data object. */
/* The rate at which to call the host's poll_quit callback. */
enum { POLL_QUIT_INTERVAL = 0x80000 };
#define LOW_BYTE(x) ((x) & 0xff)
#define HIGH_BYTE(x) (((x) >> 8) & 0xff)
#define P(X, Y) ((X << 8) | Y)
#define C (c != 0)
#define Z (nz == 0)
#define V (v != 0)
#define N (n != 0)
#define U (u != 0)
#define H (h != 0)
#define UI (ui != 0)
#define I (intMaskBit != 0)
#define BUILDSR(SD) \
h8_set_ccr (SD, (I << 7) | (UI << 6) | (H << 5) | (U << 4) \
| (N << 3) | (Z << 2) | (V << 1) | C)
#define GETSR(SD) \
/* Get Status Register (flags). */ \
c = (h8_get_ccr (sd) >> 0) & 1; \
v = (h8_get_ccr (sd) >> 1) & 1; \
nz = !((h8_get_ccr (sd) >> 2) & 1); \
n = (h8_get_ccr (sd) >> 3) & 1; \
u = (h8_get_ccr (sd) >> 4) & 1; \
h = (h8_get_ccr (sd) >> 5) & 1; \
ui = ((h8_get_ccr (sd) >> 6) & 1); \
intMaskBit = (h8_get_ccr (sd) >> 7) & 1
#ifdef __CHAR_IS_SIGNED__
#define SEXTCHAR(x) ((char) (x))
#endif
#ifndef SEXTCHAR
#define SEXTCHAR(x) ((x & 0x80) ? (x | ~0xff) : x & 0xff)
#endif
#define UEXTCHAR(x) ((x) & 0xff)
#define UEXTSHORT(x) ((x) & 0xffff)
#define SEXTSHORT(x) ((short) (x))
int h8300hmode = 0;
int h8300smode = 0;
int h8300_normal_mode = 0;
int h8300sxmode = 0;
static int
get_now (void)
{
return time (0); /* WinXX HAS UNIX like 'time', so why not use it? */
}
static int
now_persec (void)
{
return 1;
}
static int
bitfrom (int x)
{
switch (x & SIZE)
{
case L_8:
return SB;
case L_16:
case L_16U:
return SW;
case L_32:
return SL;
case L_P:
return (h8300hmode && !h8300_normal_mode)? SL : SW;
}
return 0;
}
/* Simulate an indirection / dereference.
return 0 for success, -1 for failure.
*/
static unsigned int
lvalue (SIM_DESC sd, int x, int rn, unsigned int *val)
{
SIM_CPU *cpu = STATE_CPU (sd, 0);
if (val == NULL) /* Paranoia. */
return -1;
switch (x / 4)
{
case OP_DISP:
if (rn == ZERO_REGNUM)
*val = X (OP_IMM, SP);
else
*val = X (OP_REG, SP);
break;
case OP_MEM:
*val = X (OP_MEM, SP);
break;
default:
sim_engine_halt (sd, cpu, NULL, NULL_CIA, sim_stopped, SIM_SIGSEGV);
return -1;
}
return 0;
}
static int
cmdline_location()
{
if (h8300smode && !h8300_normal_mode)
return 0xffff00L;
else if (h8300hmode && !h8300_normal_mode)
return 0x2ff00L;
else
return 0xff00L;
}
2001-12-21 01:36:23 +08:00
static void
decode (SIM_DESC sd, int addr, unsigned char *data, decoded_inst *dst)
{
int cst[3] = {0, 0, 0};
int reg[3] = {0, 0, 0};
int rdisp[3] = {0, 0, 0};
int opnum;
const struct h8_opcode *q;
dst->dst.type = -1;
dst->src.type = -1;
/* Find the exact opcode/arg combo. */
for (q = h8_opcodes; q->name; q++)
{
const op_type *nib = q->data.nib;
unsigned int len = 0;
if ((q->available == AV_H8SX && !h8300sxmode) ||
(q->available == AV_H8S && !h8300smode) ||
(q->available == AV_H8H && !h8300hmode))
continue;
cst[0] = cst[1] = cst[2] = 0;
reg[0] = reg[1] = reg[2] = 0;
rdisp[0] = rdisp[1] = rdisp[2] = 0;
while (1)
{
op_type looking_for = *nib;
int thisnib = data[len / 2];
thisnib = (len & 1) ? (thisnib & 0xf) : ((thisnib >> 4) & 0xf);
opnum = ((looking_for & OP3) ? 2 :
(looking_for & DST) ? 1 : 0);
if (looking_for < 16 && looking_for >= 0)
{
if (looking_for != thisnib)
goto fail;
}
else
{
if (looking_for & B31)
{
if (!((thisnib & 0x8) != 0))
goto fail;
looking_for = (op_type) (looking_for & ~B31);
thisnib &= 0x7;
}
else if (looking_for & B30)
{
if (!((thisnib & 0x8) == 0))
goto fail;
looking_for = (op_type) (looking_for & ~B30);
}
if (looking_for & B21)
{
if (!((thisnib & 0x4) != 0))
goto fail;
looking_for = (op_type) (looking_for & ~B21);
thisnib &= 0xb;
}
else if (looking_for & B20)
{
if (!((thisnib & 0x4) == 0))
goto fail;
looking_for = (op_type) (looking_for & ~B20);
}
if (looking_for & B11)
{
if (!((thisnib & 0x2) != 0))
goto fail;
looking_for = (op_type) (looking_for & ~B11);
thisnib &= 0xd;
}
else if (looking_for & B10)
{
if (!((thisnib & 0x2) == 0))
goto fail;
looking_for = (op_type) (looking_for & ~B10);
}
if (looking_for & B01)
{
if (!((thisnib & 0x1) != 0))
goto fail;
looking_for = (op_type) (looking_for & ~B01);
thisnib &= 0xe;
}
else if (looking_for & B00)
{
if (!((thisnib & 0x1) == 0))
goto fail;
looking_for = (op_type) (looking_for & ~B00);
}
if (looking_for & IGNORE)
{
/* Hitachi has declared that IGNORE must be zero. */
if (thisnib != 0)
goto fail;
}
else if ((looking_for & MODE) == DATA)
{
; /* Skip embedded data. */
}
else if ((looking_for & MODE) == DBIT)
{
/* Exclude adds/subs by looking at bit 0 and 2, and
make sure the operand size, either w or l,
matches by looking at bit 1. */
if ((looking_for & 7) != (thisnib & 7))
goto fail;
cst[opnum] = (thisnib & 0x8) ? 2 : 1;
}
else if ((looking_for & MODE) == REG ||
(looking_for & MODE) == LOWREG ||
(looking_for & MODE) == IND ||
(looking_for & MODE) == PREINC ||
(looking_for & MODE) == POSTINC ||
(looking_for & MODE) == PREDEC ||
(looking_for & MODE) == POSTDEC)
{
reg[opnum] = thisnib;
}
else if (looking_for & CTRL)
{
thisnib &= 7;
if (((looking_for & MODE) == CCR && (thisnib != C_CCR)) ||
((looking_for & MODE) == EXR && (thisnib != C_EXR)) ||
((looking_for & MODE) == MACH && (thisnib != C_MACH)) ||
((looking_for & MODE) == MACL && (thisnib != C_MACL)) ||
((looking_for & MODE) == VBR && (thisnib != C_VBR)) ||
((looking_for & MODE) == SBR && (thisnib != C_SBR)))
goto fail;
if (((looking_for & MODE) == CCR_EXR &&
(thisnib != C_CCR && thisnib != C_EXR)) ||
((looking_for & MODE) == VBR_SBR &&
(thisnib != C_VBR && thisnib != C_SBR)) ||
((looking_for & MODE) == MACREG &&
(thisnib != C_MACH && thisnib != C_MACL)))
goto fail;
if (((looking_for & MODE) == CC_EX_VB_SB &&
(thisnib != C_CCR && thisnib != C_EXR &&
thisnib != C_VBR && thisnib != C_SBR)))
goto fail;
reg[opnum] = thisnib;
}
else if ((looking_for & MODE) == ABS)
{
/* Absolute addresses are unsigned. */
switch (looking_for & SIZE)
{
case L_8:
cst[opnum] = UEXTCHAR (data[len / 2]);
break;
case L_16:
case L_16U:
cst[opnum] = (data[len / 2] << 8) + data[len / 2 + 1];
break;
case L_32:
cst[opnum] =
(data[len / 2 + 0] << 24) +
(data[len / 2 + 1] << 16) +
(data[len / 2 + 2] << 8) +
(data[len / 2 + 3]);
break;
default:
printf ("decode: bad size ABS: %d\n",
(looking_for & SIZE));
goto end;
}
}
else if ((looking_for & MODE) == DISP ||
(looking_for & MODE) == PCREL ||
(looking_for & MODE) == INDEXB ||
(looking_for & MODE) == INDEXW ||
(looking_for & MODE) == INDEXL)
{
switch (looking_for & SIZE)
{
case L_2:
cst[opnum] = thisnib & 3;
break;
case L_8:
cst[opnum] = SEXTCHAR (data[len / 2]);
break;
case L_16:
cst[opnum] = (data[len / 2] << 8) + data[len / 2 + 1];
cst[opnum] = (short) cst[opnum]; /* Sign extend. */
break;
case L_16U:
cst[opnum] = (data[len / 2] << 8) + data[len / 2 + 1];
break;
case L_32:
cst[opnum] =
(data[len / 2 + 0] << 24) +
(data[len / 2 + 1] << 16) +
(data[len / 2 + 2] << 8) +
(data[len / 2 + 3]);
break;
default:
printf ("decode: bad size DISP/PCREL/INDEX: %d\n",
(looking_for & SIZE));
goto end;
}
}
else if ((looking_for & SIZE) == L_16 ||
(looking_for & SIZE) == L_16U)
{
cst[opnum] = (data[len / 2] << 8) + data[len / 2 + 1];
/* Immediates are always unsigned. */
if ((looking_for & SIZE) != L_16U &&
(looking_for & MODE) != IMM)
cst[opnum] = (short) cst[opnum]; /* Sign extend. */
}
else if (looking_for & ABSJMP)
{
switch (looking_for & SIZE) {
case L_24:
cst[opnum] = (data[1] << 16) | (data[2] << 8) | (data[3]);
break;
case L_32:
cst[opnum] =
(data[len / 2 + 0] << 24) +
(data[len / 2 + 1] << 16) +
(data[len / 2 + 2] << 8) +
(data[len / 2 + 3]);
break;
default:
printf ("decode: bad size ABSJMP: %d\n",
(looking_for & SIZE));
goto end;
}
}
else if ((looking_for & MODE) == MEMIND)
{
cst[opnum] = data[1];
}
else if ((looking_for & MODE) == VECIND)
{
if(h8300_normal_mode)
cst[opnum] = ((data[1] & 0x7f) + 0x80) * 2;
else
cst[opnum] = ((data[1] & 0x7f) + 0x80) * 4;
cst[opnum] += h8_get_vbr (sd); /* Add vector base reg. */
}
else if ((looking_for & SIZE) == L_32)
{
int i = len / 2;
cst[opnum] =
(data[i + 0] << 24) |
(data[i + 1] << 16) |
(data[i + 2] << 8) |
(data[i + 3]);
}
else if ((looking_for & SIZE) == L_24)
{
int i = len / 2;
cst[opnum] =
(data[i + 0] << 16) |
(data[i + 1] << 8) |
(data[i + 2]);
}
else if (looking_for & DISPREG)
{
rdisp[opnum] = thisnib & 0x7;
}
else if ((looking_for & MODE) == KBIT)
{
switch (thisnib)
{
case 9:
cst[opnum] = 4;
break;
case 8:
cst[opnum] = 2;
break;
case 0:
cst[opnum] = 1;
break;
default:
goto fail;
}
}
else if ((looking_for & SIZE) == L_8)
{
if ((looking_for & MODE) == ABS)
{
/* Will be combined with contents of SBR_REGNUM
by fetch (). For all modes except h8sx, this
will always contain the value 0xFFFFFF00. */
cst[opnum] = data[len / 2] & 0xff;
}
else
{
cst[opnum] = data[len / 2] & 0xff;
}
}
else if ((looking_for & SIZE) == L_2)
{
cst[opnum] = thisnib & 3;
}
else if ((looking_for & SIZE) == L_3 ||
(looking_for & SIZE) == L_3NZ)
{
cst[opnum] = thisnib & 7;
if (cst[opnum] == 0 && (looking_for & SIZE) == L_3NZ)
goto fail;
}
else if ((looking_for & SIZE) == L_4)
{
cst[opnum] = thisnib & 15;
}
else if ((looking_for & SIZE) == L_5)
{
cst[opnum] = data[len / 2] & 0x1f;
}
else if (looking_for == E)
{
#ifdef ADEBUG
dst->op = q;
#endif
/* Fill in the args. */
{
const op_type *args = q->args.nib;
int hadone = 0;
int nargs;
for (nargs = 0;
nargs < 3 && *args != E;
nargs++)
{
int x = *args;
ea_type *p;
opnum = ((x & OP3) ? 2 :
(x & DST) ? 1 : 0);
if (x & DST)
p = &dst->dst;
else if (x & OP3)
p = &dst->op3;
else
p = &dst->src;
if ((x & MODE) == IMM ||
(x & MODE) == KBIT ||
(x & MODE) == DBIT)
{
/* Use the instruction to determine
the operand size. */
p->type = X (OP_IMM, OP_SIZE (q->how));
p->literal = cst[opnum];
}
else if ((x & MODE) == CONST_2 ||
(x & MODE) == CONST_4 ||
(x & MODE) == CONST_8 ||
(x & MODE) == CONST_16)
{
/* Use the instruction to determine
the operand size. */
p->type = X (OP_IMM, OP_SIZE (q->how));
switch (x & MODE) {
case CONST_2: p->literal = 2; break;
case CONST_4: p->literal = 4; break;
case CONST_8: p->literal = 8; break;
case CONST_16: p->literal = 16; break;
}
}
else if ((x & MODE) == REG)
{
p->type = X (OP_REG, bitfrom (x));
p->reg = reg[opnum];
}
else if ((x & MODE) == LOWREG)
{
p->type = X (OP_LOWREG, bitfrom (x));
p->reg = reg[opnum];
}
else if ((x & MODE) == PREINC)
{
/* Use the instruction to determine
the operand size. */
p->type = X (OP_PREINC, OP_SIZE (q->how));
p->reg = reg[opnum] & 0x7;
}
else if ((x & MODE) == POSTINC)
{
/* Use the instruction to determine
the operand size. */
p->type = X (OP_POSTINC, OP_SIZE (q->how));
p->reg = reg[opnum] & 0x7;
}
else if ((x & MODE) == PREDEC)
{
/* Use the instruction to determine
the operand size. */
p->type = X (OP_PREDEC, OP_SIZE (q->how));
p->reg = reg[opnum] & 0x7;
}
else if ((x & MODE) == POSTDEC)
{
/* Use the instruction to determine
the operand size. */
p->type = X (OP_POSTDEC, OP_SIZE (q->how));
p->reg = reg[opnum] & 0x7;
}
else if ((x & MODE) == IND)
{
/* Note: an indirect is transformed into
a displacement of zero.
*/
/* Use the instruction to determine
the operand size. */
p->type = X (OP_DISP, OP_SIZE (q->how));
p->reg = reg[opnum] & 0x7;
p->literal = 0;
if (OP_KIND (q->how) == O_JSR ||
OP_KIND (q->how) == O_JMP)
if (lvalue (sd, p->type, p->reg, (unsigned int *)&p->type))
goto end;
}
else if ((x & MODE) == ABS)
{
/* Note: a 16 or 32 bit ABS is transformed into a
displacement from pseudo-register ZERO_REGNUM,
which is always zero. An 8 bit ABS becomes
a displacement from SBR_REGNUM.
*/
/* Use the instruction to determine
the operand size. */
p->type = X (OP_DISP, OP_SIZE (q->how));
p->literal = cst[opnum];
/* 8-bit ABS is displacement from SBR.
16 and 32-bit ABS are displacement from ZERO.
(SBR will always be zero except for h8/sx)
*/
if ((x & SIZE) == L_8)
p->reg = SBR_REGNUM;
else
p->reg = ZERO_REGNUM;;
}
else if ((x & MODE) == MEMIND ||
(x & MODE) == VECIND)
{
/* Size doesn't matter. */
p->type = X (OP_MEM, SB);
p->literal = cst[opnum];
if (OP_KIND (q->how) == O_JSR ||
OP_KIND (q->how) == O_JMP)
if (lvalue (sd, p->type, p->reg, (unsigned int *)&p->type))
goto end;
}
else if ((x & MODE) == PCREL)
{
/* Size doesn't matter. */
p->type = X (OP_PCREL, SB);
p->literal = cst[opnum];
}
else if (x & ABSJMP)
{
p->type = X (OP_IMM, SP);
p->literal = cst[opnum];
}
else if ((x & MODE) == INDEXB)
{
p->type = X (OP_INDEXB, OP_SIZE (q->how));
p->literal = cst[opnum];
p->reg = rdisp[opnum];
}
else if ((x & MODE) == INDEXW)
{
p->type = X (OP_INDEXW, OP_SIZE (q->how));
p->literal = cst[opnum];
p->reg = rdisp[opnum];
}
else if ((x & MODE) == INDEXL)
{
p->type = X (OP_INDEXL, OP_SIZE (q->how));
p->literal = cst[opnum];
p->reg = rdisp[opnum];
}
else if ((x & MODE) == DISP)
{
/* Yuck -- special for mova args. */
if (strncmp (q->name, "mova", 4) == 0 &&
(x & SIZE) == L_2)
{
/* Mova can have a DISP2 dest, with an
INDEXB or INDEXW src. The multiplier
for the displacement value is determined
by the src operand, not by the insn. */
switch (OP_KIND (dst->src.type))
{
case OP_INDEXB:
p->type = X (OP_DISP, SB);
p->literal = cst[opnum];
break;
case OP_INDEXW:
p->type = X (OP_DISP, SW);
p->literal = cst[opnum] * 2;
break;
default:
goto fail;
}
}
else
{
p->type = X (OP_DISP, OP_SIZE (q->how));
p->literal = cst[opnum];
/* DISP2 is special. */
if ((x & SIZE) == L_2)
switch (OP_SIZE (q->how))
{
case SB: break;
case SW: p->literal *= 2; break;
case SL: p->literal *= 4; break;
}
}
p->reg = rdisp[opnum];
}
else if (x & CTRL)
{
switch (reg[opnum])
{
case C_CCR:
p->type = X (OP_CCR, SB);
break;
case C_EXR:
p->type = X (OP_EXR, SB);
break;
case C_MACH:
p->type = X (OP_MACH, SL);
break;
case C_MACL:
p->type = X (OP_MACL, SL);
break;
case C_VBR:
p->type = X (OP_VBR, SL);
break;
case C_SBR:
p->type = X (OP_SBR, SL);
break;
}
}
else if ((x & MODE) == CCR)
{
p->type = OP_CCR;
}
else if ((x & MODE) == EXR)
{
p->type = OP_EXR;
}
else
printf ("Hmmmm 0x%x...\n", x);
args++;
}
}
/* Unary operators: treat src and dst as equivalent. */
if (dst->dst.type == -1)
dst->dst = dst->src;
if (dst->src.type == -1)
dst->src = dst->dst;
dst->opcode = q->how;
dst->cycles = q->time;
/* And jsr's to these locations are turned into
magic traps. */
2002-05-18 03:19:24 +08:00
if (OP_KIND (dst->opcode) == O_JSR)
{
switch (dst->src.literal)
{
case 0xc5:
dst->opcode = O (O_SYS_OPEN, SB);
break;
case 0xc6:
dst->opcode = O (O_SYS_READ, SB);
break;
case 0xc7:
dst->opcode = O (O_SYS_WRITE, SB);
break;
case 0xc8:
dst->opcode = O (O_SYS_LSEEK, SB);
break;
case 0xc9:
dst->opcode = O (O_SYS_CLOSE, SB);
break;
case 0xca:
dst->opcode = O (O_SYS_STAT, SB);
break;
case 0xcb:
dst->opcode = O (O_SYS_FSTAT, SB);
break;
case 0xcc:
dst->opcode = O (O_SYS_CMDLINE, SB);
break;
}
/* End of Processing for system calls. */
}
dst->next_pc = addr + len / 2;
return;
}
else
printf ("Don't understand 0x%x \n", looking_for);
}
len++;
nib++;
}
fail:
;
}
end:
/* Fell off the end. */
dst->opcode = O (O_ILL, SB);
}
static unsigned char *breg[32];
static unsigned short *wreg[16];
#define GET_B_REG(X) *(breg[X])
#define SET_B_REG(X, Y) (*(breg[X])) = (Y)
#define GET_W_REG(X) *(wreg[X])
#define SET_W_REG(X, Y) (*(wreg[X])) = (Y)
#define GET_L_REG(X) h8_get_reg (sd, X)
#define SET_L_REG(X, Y) h8_set_reg (sd, X, Y)
#define GET_MEMORY_L(X) \
((X) < memory_size \
? ((h8_get_memory (sd, (X)+0) << 24) | (h8_get_memory (sd, (X)+1) << 16) \
| (h8_get_memory (sd, (X)+2) << 8) | (h8_get_memory (sd, (X)+3) << 0)) \
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
: 0)
#define GET_MEMORY_W(X) \
((X) < memory_size \
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
? ((h8_get_memory (sd, (X)+0) << 8) | (h8_get_memory (sd, (X)+1) << 0)) \
: 0)
#define GET_MEMORY_B(X) \
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
((X) < memory_size ? h8_get_memory (sd, (X)) : 0)
#define SET_MEMORY_L(X, Y) \
{ register unsigned char *_p; register int __y = (Y); \
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
_p = ((X) < memory_size ? h8_get_memory_buf (sd) + (X) : 0); \
_p[0] = __y >> 24; _p[1] = __y >> 16; \
_p[2] = __y >> 8; _p[3] = __y >> 0; \
}
#define SET_MEMORY_W(X, Y) \
{ register unsigned char *_p; register int __y = (Y); \
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
_p = ((X) < memory_size ? h8_get_memory_buf (sd) + (X) : 0); \
_p[0] = __y >> 8; _p[1] = __y; \
}
#define SET_MEMORY_B(X, Y) \
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
((X) < memory_size ? h8_set_memory (sd, (X), (Y)) : 0)
/* Simulate a memory fetch.
Return 0 for success, -1 for failure.
*/
static int
fetch_1 (SIM_DESC sd, ea_type *arg, int *val, int twice)
{
SIM_CPU *cpu = STATE_CPU (sd, 0);
int rn = arg->reg;
int abs = arg->literal;
int r;
int t;
if (val == NULL)
return -1; /* Paranoia. */
switch (arg->type)
{
/* Indexed register plus displacement mode:
This new family of addressing modes are similar to OP_DISP
(register plus displacement), with two differences:
1) INDEXB uses only the least significant byte of the register,
INDEXW uses only the least significant word, and
INDEXL uses the entire register (just like OP_DISP).
and
2) The displacement value in abs is multiplied by two
for SW-sized operations, and by four for SL-size.
This gives nine possible variations.
*/
case X (OP_INDEXB, SB):
case X (OP_INDEXB, SW):
case X (OP_INDEXB, SL):
case X (OP_INDEXW, SB):
case X (OP_INDEXW, SW):
case X (OP_INDEXW, SL):
case X (OP_INDEXL, SB):
case X (OP_INDEXL, SW):
case X (OP_INDEXL, SL):
t = GET_L_REG (rn);
switch (OP_KIND (arg->type)) {
case OP_INDEXB: t &= 0xff; break;
case OP_INDEXW: t &= 0xffff; break;
case OP_INDEXL:
default: break;
}
switch (OP_SIZE (arg->type)) {
case SB:
*val = GET_MEMORY_B ((t * 1 + abs) & h8_get_mask (sd));
break;
case SW:
*val = GET_MEMORY_W ((t * 2 + abs) & h8_get_mask (sd));
break;
case SL:
*val = GET_MEMORY_L ((t * 4 + abs) & h8_get_mask (sd));
break;
}
break;
case X (OP_LOWREG, SB):
*val = GET_L_REG (rn) & 0xff;
break;
case X (OP_LOWREG, SW):
*val = GET_L_REG (rn) & 0xffff;
break;
case X (OP_REG, SB): /* Register direct, byte. */
*val = GET_B_REG (rn);
break;
case X (OP_REG, SW): /* Register direct, word. */
*val = GET_W_REG (rn);
break;
case X (OP_REG, SL): /* Register direct, long. */
*val = GET_L_REG (rn);
break;
case X (OP_IMM, SB): /* Immediate, byte. */
case X (OP_IMM, SW): /* Immediate, word. */
case X (OP_IMM, SL): /* Immediate, long. */
*val = abs;
break;
case X (OP_POSTINC, SB): /* Register indirect w/post-incr: byte. */
t = GET_L_REG (rn);
r = GET_MEMORY_B (t & h8_get_mask (sd));
if (!twice)
t += 1;
SET_L_REG (rn, t);
*val = r;
break;
case X (OP_POSTINC, SW): /* Register indirect w/post-incr: word. */
t = GET_L_REG (rn);
r = GET_MEMORY_W (t & h8_get_mask (sd));
if (!twice)
t += 2;
SET_L_REG (rn, t);
*val = r;
break;
case X (OP_POSTINC, SL): /* Register indirect w/post-incr: long. */
t = GET_L_REG (rn);
r = GET_MEMORY_L (t & h8_get_mask (sd));
if (!twice)
t += 4;
SET_L_REG (rn, t);
*val = r;
break;
case X (OP_POSTDEC, SB): /* Register indirect w/post-decr: byte. */
t = GET_L_REG (rn);
r = GET_MEMORY_B (t & h8_get_mask (sd));
if (!twice)
t -= 1;
SET_L_REG (rn, t);
*val = r;
break;
case X (OP_POSTDEC, SW): /* Register indirect w/post-decr: word. */
t = GET_L_REG (rn);
r = GET_MEMORY_W (t & h8_get_mask (sd));
if (!twice)
t -= 2;
SET_L_REG (rn, t);
*val = r;
break;
case X (OP_POSTDEC, SL): /* Register indirect w/post-decr: long. */
t = GET_L_REG (rn);
r = GET_MEMORY_L (t & h8_get_mask (sd));
if (!twice)
t -= 4;
SET_L_REG (rn, t);
*val = r;
break;
case X (OP_PREDEC, SB): /* Register indirect w/pre-decr: byte. */
t = GET_L_REG (rn) - 1;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
*val = GET_MEMORY_B (t);
break;
case X (OP_PREDEC, SW): /* Register indirect w/pre-decr: word. */
t = GET_L_REG (rn) - 2;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
*val = GET_MEMORY_W (t);
break;
case X (OP_PREDEC, SL): /* Register indirect w/pre-decr: long. */
t = GET_L_REG (rn) - 4;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
*val = GET_MEMORY_L (t);
break;
case X (OP_PREINC, SB): /* Register indirect w/pre-incr: byte. */
t = GET_L_REG (rn) + 1;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
*val = GET_MEMORY_B (t);
break;
case X (OP_PREINC, SW): /* Register indirect w/pre-incr: long. */
t = GET_L_REG (rn) + 2;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
*val = GET_MEMORY_W (t);
break;
case X (OP_PREINC, SL): /* Register indirect w/pre-incr: long. */
t = GET_L_REG (rn) + 4;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
*val = GET_MEMORY_L (t);
break;
case X (OP_DISP, SB): /* Register indirect w/displacement: byte. */
t = GET_L_REG (rn) + abs;
t &= h8_get_mask (sd);
*val = GET_MEMORY_B (t);
break;
case X (OP_DISP, SW): /* Register indirect w/displacement: word. */
t = GET_L_REG (rn) + abs;
t &= h8_get_mask (sd);
*val = GET_MEMORY_W (t);
break;
case X (OP_DISP, SL): /* Register indirect w/displacement: long. */
t = GET_L_REG (rn) + abs;
t &= h8_get_mask (sd);
*val =GET_MEMORY_L (t);
break;
case X (OP_MEM, SL): /* Absolute memory address, long. */
t = GET_MEMORY_L (abs);
t &= h8_get_mask (sd);
*val = t;
break;
case X (OP_MEM, SW): /* Absolute memory address, word. */
t = GET_MEMORY_W (abs);
t &= h8_get_mask (sd);
*val = t;
break;
case X (OP_PCREL, SB): /* PC relative (for jump, branch etc). */
case X (OP_PCREL, SW):
case X (OP_PCREL, SL):
case X (OP_PCREL, SN):
*val = abs;
break;
case X (OP_MEM, SB): /* Why isn't this implemented? */
default:
sim_engine_halt (sd, cpu, NULL, NULL_CIA, sim_stopped, SIM_SIGSEGV);
return -1;
}
return 0; /* Success. */
}
/* Normal fetch. */
static int
fetch (SIM_DESC sd, ea_type *arg, int *val)
{
return fetch_1 (sd, arg, val, 0);
}
/* Fetch which will be followed by a store to the same location.
The difference being that we don't want to do a post-increment
or post-decrement at this time: we'll do it when we store. */
static int
fetch2 (SIM_DESC sd, ea_type *arg, int *val)
{
return fetch_1 (sd, arg, val, 1);
}
/* Simulate a memory store.
Return 0 for success, -1 for failure.
*/
static int
store_1 (SIM_DESC sd, ea_type *arg, int n, int twice)
{
SIM_CPU *cpu = STATE_CPU (sd, 0);
int rn = arg->reg;
int abs = arg->literal;
int t;
switch (arg->type)
{
/* Indexed register plus displacement mode:
This new family of addressing modes are similar to OP_DISP
(register plus displacement), with two differences:
1) INDEXB uses only the least significant byte of the register,
INDEXW uses only the least significant word, and
INDEXL uses the entire register (just like OP_DISP).
and
2) The displacement value in abs is multiplied by two
for SW-sized operations, and by four for SL-size.
This gives nine possible variations.
*/
case X (OP_INDEXB, SB):
case X (OP_INDEXB, SW):
case X (OP_INDEXB, SL):
case X (OP_INDEXW, SB):
case X (OP_INDEXW, SW):
case X (OP_INDEXW, SL):
case X (OP_INDEXL, SB):
case X (OP_INDEXL, SW):
case X (OP_INDEXL, SL):
t = GET_L_REG (rn);
switch (OP_KIND (arg->type)) {
case OP_INDEXB: t &= 0xff; break;
case OP_INDEXW: t &= 0xffff; break;
case OP_INDEXL:
default: break;
}
switch (OP_SIZE (arg->type)) {
case SB:
SET_MEMORY_B ((t * 1 + abs) & h8_get_mask (sd), n);
break;
case SW:
SET_MEMORY_W ((t * 2 + abs) & h8_get_mask (sd), n);
break;
case SL:
SET_MEMORY_L ((t * 4 + abs) & h8_get_mask (sd), n);
break;
}
break;
case X (OP_REG, SB): /* Register direct, byte. */
SET_B_REG (rn, n);
break;
case X (OP_REG, SW): /* Register direct, word. */
SET_W_REG (rn, n);
break;
case X (OP_REG, SL): /* Register direct, long. */
SET_L_REG (rn, n);
break;
case X (OP_PREDEC, SB): /* Register indirect w/pre-decr, byte. */
t = GET_L_REG (rn);
if (!twice)
t -= 1;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
SET_MEMORY_B (t, n);
break;
case X (OP_PREDEC, SW): /* Register indirect w/pre-decr, word. */
t = GET_L_REG (rn);
if (!twice)
t -= 2;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
SET_MEMORY_W (t, n);
break;
case X (OP_PREDEC, SL): /* Register indirect w/pre-decr, long. */
t = GET_L_REG (rn);
if (!twice)
t -= 4;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
SET_MEMORY_L (t, n);
break;
case X (OP_PREINC, SB): /* Register indirect w/pre-incr, byte. */
t = GET_L_REG (rn);
if (!twice)
t += 1;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
SET_MEMORY_B (t, n);
break;
case X (OP_PREINC, SW): /* Register indirect w/pre-incr, word. */
t = GET_L_REG (rn);
if (!twice)
t += 2;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
SET_MEMORY_W (t, n);
break;
case X (OP_PREINC, SL): /* Register indirect w/pre-incr, long. */
t = GET_L_REG (rn);
if (!twice)
t += 4;
SET_L_REG (rn, t);
t &= h8_get_mask (sd);
SET_MEMORY_L (t, n);
break;
case X (OP_POSTDEC, SB): /* Register indirect w/post-decr, byte. */
t = GET_L_REG (rn);
SET_L_REG (rn, t - 1);
t &= h8_get_mask (sd);
SET_MEMORY_B (t, n);
break;
case X (OP_POSTDEC, SW): /* Register indirect w/post-decr, word. */
t = GET_L_REG (rn);
SET_L_REG (rn, t - 2);
t &= h8_get_mask (sd);
SET_MEMORY_W (t, n);
break;
case X (OP_POSTDEC, SL): /* Register indirect w/post-decr, long. */
t = GET_L_REG (rn);
SET_L_REG (rn, t - 4);
t &= h8_get_mask (sd);
SET_MEMORY_L (t, n);
break;
case X (OP_POSTINC, SB): /* Register indirect w/post-incr, byte. */
t = GET_L_REG (rn);
SET_L_REG (rn, t + 1);
t &= h8_get_mask (sd);
SET_MEMORY_B (t, n);
break;
case X (OP_POSTINC, SW): /* Register indirect w/post-incr, word. */
t = GET_L_REG (rn);
SET_L_REG (rn, t + 2);
t &= h8_get_mask (sd);
SET_MEMORY_W (t, n);
break;
case X (OP_POSTINC, SL): /* Register indirect w/post-incr, long. */
t = GET_L_REG (rn);
SET_L_REG (rn, t + 4);
t &= h8_get_mask (sd);
SET_MEMORY_L (t, n);
break;
case X (OP_DISP, SB): /* Register indirect w/displacement, byte. */
t = GET_L_REG (rn) + abs;
t &= h8_get_mask (sd);
SET_MEMORY_B (t, n);
break;
case X (OP_DISP, SW): /* Register indirect w/displacement, word. */
t = GET_L_REG (rn) + abs;
t &= h8_get_mask (sd);
SET_MEMORY_W (t, n);
break;
case X (OP_DISP, SL): /* Register indirect w/displacement, long. */
t = GET_L_REG (rn) + abs;
t &= h8_get_mask (sd);
SET_MEMORY_L (t, n);
break;
case X (OP_MEM, SB): /* Why isn't this implemented? */
case X (OP_MEM, SW): /* Why isn't this implemented? */
case X (OP_MEM, SL): /* Why isn't this implemented? */
default:
sim_engine_halt (sd, cpu, NULL, NULL_CIA, sim_stopped, SIM_SIGSEGV);
return -1;
}
return 0;
}
/* Normal store. */
static int
store (SIM_DESC sd, ea_type *arg, int n)
{
return store_1 (sd, arg, n, 0);
}
/* Store which follows a fetch from the same location.
The difference being that we don't want to do a pre-increment
or pre-decrement at this time: it was already done when we fetched. */
static int
store2 (SIM_DESC sd, ea_type *arg, int n)
{
return store_1 (sd, arg, n, 1);
}
/* Flag to be set whenever a new SIM_DESC object is created. */
static int init_pointers_needed = 1;
static void
init_pointers (SIM_DESC sd)
{
if (init_pointers_needed)
{
int i;
if (h8300smode && !h8300_normal_mode)
memory_size = H8300S_MSIZE;
else if (h8300hmode && !h8300_normal_mode)
memory_size = H8300H_MSIZE;
else
memory_size = H8300_MSIZE;
/* `msize' must be a power of two. */
if ((memory_size & (memory_size - 1)) != 0)
{
sim_io_printf
(sd,
"init_pointers: bad memory size %d, defaulting to %d.\n",
memory_size, memory_size = H8300S_MSIZE);
}
if (h8_get_memory_buf (sd))
free (h8_get_memory_buf (sd));
h8_set_memory_buf (sd, (unsigned char *)
calloc (sizeof (char), memory_size));
sd->memory_size = memory_size;
h8_set_mask (sd, memory_size - 1);
memset (h8_get_reg_buf (sd), 0, sizeof (((STATE_CPU (sd, 0))->regs)));
for (i = 0; i < 8; i++)
{
/* FIXME: rewrite using local buffer. */
unsigned char *p = (unsigned char *) (h8_get_reg_buf (sd) + i);
unsigned char *e = (unsigned char *) (h8_get_reg_buf (sd) + i + 1);
unsigned short *q = (unsigned short *) (h8_get_reg_buf (sd) + i);
unsigned short *u = (unsigned short *) (h8_get_reg_buf (sd) + i + 1);
h8_set_reg (sd, i, 0x00112233);
while (p < e)
{
if (*p == 0x22)
breg[i] = p;
if (*p == 0x33)
breg[i + 8] = p;
if (*p == 0x11)
breg[i + 16] = p;
if (*p == 0x00)
breg[i + 24] = p;
p++;
}
wreg[i] = wreg[i + 8] = 0;
while (q < u)
{
if (*q == 0x2233)
{
wreg[i] = q;
}
if (*q == 0x0011)
{
wreg[i + 8] = q;
}
q++;
}
if (wreg[i] == 0 || wreg[i + 8] == 0)
sim_io_printf (sd, "init_pointers: internal error.\n");
h8_set_reg (sd, i, 0);
}
init_pointers_needed = 0;
}
}
#define OBITOP(name, f, s, op) \
case O (name, SB): \
{ \
int m, tmp; \
\
if (f) \
if (fetch (sd, &code->dst, &ea)) \
goto end; \
if (fetch (sd, &code->src, &tmp)) \
goto end; \
m = 1 << (tmp & 7); \
op; \
if (s) \
if (store (sd, &code->dst,ea)) \
goto end; \
goto next; \
}
static void
step_once (SIM_DESC sd, SIM_CPU *cpu)
{
int cycles = 0;
int insts = 0;
int tick_start = get_now ();
int res;
int tmp;
int rd;
int ea;
int bit;
int pc;
int c, nz, v, n, u, h, ui, intMaskBit;
int trace, intMask;
int oldmask;
host_callback *sim_callback = STATE_CALLBACK (sd);
init_pointers (sd);
pc = h8_get_pc (sd);
/* The PC should never be odd. */
if (pc & 0x1)
{
sim_engine_halt (sd, cpu, NULL, NULL_CIA, sim_stopped, SIM_SIGBUS);
return;
}
/* Get Status Register (flags). */
GETSR (sd);
if (h8300smode) /* Get exr. */
{
trace = (h8_get_exr (sd) >> 7) & 1;
intMask = h8_get_exr (sd) & 7;
}
oldmask = h8_get_mask (sd);
if (!h8300hmode || h8300_normal_mode)
h8_set_mask (sd, 0xffff);
do
{
decoded_inst _code, *code = &_code;
memset (code, 0, sizeof (*code));
decode (sd, pc, h8_get_memory_buf (sd) + pc, code);
code->oldpc = pc;
#if ADEBUG
if (debug)
{
printf ("%x %d %s\n", pc, code->opcode,
code->op ? code->op->name : "**");
}
h8_increment_stats (sd, code->opcode);
#endif
if (code->opcode)
{
cycles += code->cycles;
insts++;
}
switch (code->opcode)
{
case O (O_MOVAB, SL):
case O (O_MOVAW, SL):
case O (O_MOVAL, SL):
/* 1) Evaluate 2nd argument (dst).
2) Mask / zero extend according to whether 1st argument (src)
is INDEXB, INDEXW, or INDEXL.
3) Left-shift the result by 0, 1 or 2, according to size of mova
(mova/b, mova/w, mova/l).
4) Add literal value of 1st argument (src).
5) Store result in 3rd argument (op3).
*/
/* Alas, since this is the only instruction with 3 arguments,
decode doesn't handle them very well. Some fix-up is required.
a) The size of dst is determined by whether src is
INDEXB or INDEXW. */
if (OP_KIND (code->src.type) == OP_INDEXB)
code->dst.type = X (OP_KIND (code->dst.type), SB);
else if (OP_KIND (code->src.type) == OP_INDEXW)
code->dst.type = X (OP_KIND (code->dst.type), SW);
/* b) If op3 == null, then this is the short form of the insn.
Dst is the dispreg of src, and op3 is the 32-bit form
of the same register.
*/
if (code->op3.type == 0)
{
/* Short form: src == INDEXB/INDEXW, dst == op3 == 0.
We get to compose dst and op3 as follows:
op3 is a 32-bit register, ID == src.reg.
dst is the same register, but 8 or 16 bits
depending on whether src is INDEXB or INDEXW.
*/
code->op3.type = X (OP_REG, SL);
code->op3.reg = code->src.reg;
code->op3.literal = 0;
if (OP_KIND (code->src.type) == OP_INDEXB)
{
code->dst.type = X (OP_REG, SB);
code->dst.reg = code->op3.reg + 8;
}
else
code->dst.type = X (OP_REG, SW);
}
if (fetch (sd, &code->dst, &ea))
goto end;
switch (OP_KIND (code->src.type)) {
case OP_INDEXB: ea = ea & 0xff; break;
case OP_INDEXW: ea = ea & 0xffff; break;
case OP_INDEXL: break;
default: goto illegal;
}
switch (code->opcode) {
case O (O_MOVAB, SL): break;
case O (O_MOVAW, SL): ea = ea << 1; break;
case O (O_MOVAL, SL): ea = ea << 2; break;
default: goto illegal;
}
ea = ea + code->src.literal;
if (store (sd, &code->op3, ea))
goto end;
goto next;
case O (O_SUBX, SB): /* subx, extended sub */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = -(ea + C);
res = rd + ea;
goto alu8;
case O (O_SUBX, SW): /* subx, extended sub */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = -(ea + C);
res = rd + ea;
goto alu16;
case O (O_SUBX, SL): /* subx, extended sub */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = -(ea + C);
res = rd + ea;
goto alu32;
case O (O_ADDX, SB): /* addx, extended add */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = ea + C;
res = rd + ea;
goto alu8;
case O (O_ADDX, SW): /* addx, extended add */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = ea + C;
res = rd + ea;
goto alu16;
case O (O_ADDX, SL): /* addx, extended add */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = ea + C;
res = rd + ea;
goto alu32;
case O (O_SUB, SB): /* sub.b */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
ea = -ea;
res = rd + ea;
goto alu8;
case O (O_SUB, SW): /* sub.w */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
ea = -ea;
res = rd + ea;
goto alu16;
case O (O_SUB, SL): /* sub.l */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
ea = -ea;
res = rd + ea;
goto alu32;
case O (O_NEG, SB): /* neg.b */
/* Fetch ea. */
if (fetch2 (sd, &code->src, &ea))
goto end;
ea = -ea;
rd = 0;
res = rd + ea;
goto alu8;
case O (O_NEG, SW): /* neg.w */
/* Fetch ea. */
if (fetch2 (sd, &code->src, &ea))
goto end;
ea = -ea;
rd = 0;
res = rd + ea;
goto alu16;
case O (O_NEG, SL): /* neg.l */
/* Fetch ea. */
if (fetch2 (sd, &code->src, &ea))
goto end;
ea = -ea;
rd = 0;
res = rd + ea;
goto alu32;
case O (O_ADD, SB): /* add.b */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
res = rd + ea;
goto alu8;
case O (O_ADD, SW): /* add.w */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
res = rd + ea;
goto alu16;
case O (O_ADD, SL): /* add.l */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
res = rd + ea;
goto alu32;
case O (O_AND, SB): /* and.b */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd & ea;
goto log8;
case O (O_AND, SW): /* and.w */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd & ea;
goto log16;
case O (O_AND, SL): /* and.l */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd & ea;
goto log32;
case O (O_OR, SB): /* or.b */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd | ea;
goto log8;
case O (O_OR, SW): /* or.w */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd | ea;
goto log16;
case O (O_OR, SL): /* or.l */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd | ea;
goto log32;
case O (O_XOR, SB): /* xor.b */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd ^ ea;
goto log8;
case O (O_XOR, SW): /* xor.w */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd ^ ea;
goto log16;
case O (O_XOR, SL): /* xor.l */
/* Fetch rd and ea. */
if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
goto end;
res = rd ^ ea;
goto log32;
case O (O_MOV, SB):
if (fetch (sd, &code->src, &res))
goto end;
if (store (sd, &code->dst, res))
goto end;
goto just_flags_log8;
case O (O_MOV, SW):
if (fetch (sd, &code->src, &res))
goto end;
if (store (sd, &code->dst, res))
goto end;
goto just_flags_log16;
case O (O_MOV, SL):
if (fetch (sd, &code->src, &res))
goto end;
if (store (sd, &code->dst, res))
goto end;
goto just_flags_log32;
case O (O_MOVMD, SB): /* movmd.b */
ea = GET_W_REG (4);
if (ea == 0)
ea = 0x10000;
while (ea--)
{
rd = GET_MEMORY_B (GET_L_REG (5));
SET_MEMORY_B (GET_L_REG (6), rd);
SET_L_REG (5, GET_L_REG (5) + 1);
SET_L_REG (6, GET_L_REG (6) + 1);
SET_W_REG (4, ea);
}
goto next;
case O (O_MOVMD, SW): /* movmd.w */
ea = GET_W_REG (4);
if (ea == 0)
ea = 0x10000;
while (ea--)
{
rd = GET_MEMORY_W (GET_L_REG (5));
SET_MEMORY_W (GET_L_REG (6), rd);
SET_L_REG (5, GET_L_REG (5) + 2);
SET_L_REG (6, GET_L_REG (6) + 2);
SET_W_REG (4, ea);
}
goto next;
case O (O_MOVMD, SL): /* movmd.l */
ea = GET_W_REG (4);
if (ea == 0)
ea = 0x10000;
while (ea--)
{
rd = GET_MEMORY_L (GET_L_REG (5));
SET_MEMORY_L (GET_L_REG (6), rd);
SET_L_REG (5, GET_L_REG (5) + 4);
SET_L_REG (6, GET_L_REG (6) + 4);
SET_W_REG (4, ea);
}
goto next;
case O (O_MOVSD, SB): /* movsd.b */
/* This instruction implements strncpy, with a conditional branch.
r4 contains n, r5 contains src, and r6 contains dst.
The 16-bit displacement operand is added to the pc
if and only if the end of string is reached before
n bytes are transferred. */
ea = GET_L_REG (4) & 0xffff;
if (ea == 0)
ea = 0x10000;
while (ea--)
{
rd = GET_MEMORY_B (GET_L_REG (5));
SET_MEMORY_B (GET_L_REG (6), rd);
SET_L_REG (5, GET_L_REG (5) + 1);
SET_L_REG (6, GET_L_REG (6) + 1);
SET_W_REG (4, ea);
if (rd == 0)
goto condtrue;
}
goto next;
case O (O_EEPMOV, SB): /* eepmov.b */
case O (O_EEPMOV, SW): /* eepmov.w */
if (h8300hmode || h8300smode)
{
register unsigned char *_src, *_dst;
unsigned int count = ((code->opcode == O (O_EEPMOV, SW))
? h8_get_reg (sd, R4_REGNUM) & 0xffff
: h8_get_reg (sd, R4_REGNUM) & 0xff);
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
_src = h8_get_memory_buf (sd) + h8_get_reg (sd, R5_REGNUM);
if ((_src + count) >= (h8_get_memory_buf (sd) + memory_size))
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
goto illegal;
_dst = h8_get_memory_buf (sd) + h8_get_reg (sd, R6_REGNUM);
if ((_dst + count) >= (h8_get_memory_buf (sd) + memory_size))
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
goto illegal;
memcpy (_dst, _src, count);
h8_set_reg (sd, R5_REGNUM, h8_get_reg (sd, R5_REGNUM) + count);
h8_set_reg (sd, R6_REGNUM, h8_get_reg (sd, R6_REGNUM) + count);
h8_set_reg (sd, R4_REGNUM, h8_get_reg (sd, R4_REGNUM) &
((code->opcode == O (O_EEPMOV, SW))
? (~0xffff) : (~0xff)));
cycles += 2 * count;
goto next;
}
goto illegal;
case O (O_ADDS, SL): /* adds (.l) */
/* FIXME fetch.
* This insn only uses register operands, but still
* it would be cleaner to use fetch and store... */
SET_L_REG (code->dst.reg,
GET_L_REG (code->dst.reg)
+ code->src.literal);
goto next;
case O (O_SUBS, SL): /* subs (.l) */
/* FIXME fetch.
* This insn only uses register operands, but still
* it would be cleaner to use fetch and store... */
SET_L_REG (code->dst.reg,
GET_L_REG (code->dst.reg)
- code->src.literal);
goto next;
case O (O_CMP, SB): /* cmp.b */
if (fetch (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = -ea;
res = rd + ea;
goto just_flags_alu8;
case O (O_CMP, SW): /* cmp.w */
if (fetch (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = -ea;
res = rd + ea;
goto just_flags_alu16;
case O (O_CMP, SL): /* cmp.l */
if (fetch (sd, &code->dst, &rd))
goto end;
if (fetch (sd, &code->src, &ea))
goto end;
ea = -ea;
res = rd + ea;
goto just_flags_alu32;
case O (O_DEC, SB): /* dec.b */
/* FIXME fetch.
* This insn only uses register operands, but still
* it would be cleaner to use fetch and store... */
rd = GET_B_REG (code->src.reg);
ea = -1;
res = rd + ea;
SET_B_REG (code->src.reg, res);
goto just_flags_inc8;
case O (O_DEC, SW): /* dec.w */
/* FIXME fetch.
* This insn only uses register operands, but still
* it would be cleaner to use fetch and store... */
rd = GET_W_REG (code->dst.reg);
ea = -code->src.literal;
res = rd + ea;
SET_W_REG (code->dst.reg, res);
goto just_flags_inc16;
case O (O_DEC, SL): /* dec.l */
/* FIXME fetch.
* This insn only uses register operands, but still
* it would be cleaner to use fetch and store... */
rd = GET_L_REG (code->dst.reg);
ea = -code->src.literal;
res = rd + ea;
SET_L_REG (code->dst.reg, res);
goto just_flags_inc32;
case O (O_INC, SB): /* inc.b */
/* FIXME fetch.
* This insn only uses register operands, but still
* it would be cleaner to use fetch and store... */
rd = GET_B_REG (code->src.reg);
ea = 1;
res = rd + ea;
SET_B_REG (code->src.reg, res);
goto just_flags_inc8;
case O (O_INC, SW): /* inc.w */
/* FIXME fetch.
* This insn only uses register operands, but still
* it would be cleaner to use fetch and store... */
rd = GET_W_REG (code->dst.reg);
ea = code->src.literal;
res = rd + ea;
SET_W_REG (code->dst.reg, res);
goto just_flags_inc16;
case O (O_INC, SL): /* inc.l */
/* FIXME fetch.
* This insn only uses register operands, but still
* it would be cleaner to use fetch and store... */
rd = GET_L_REG (code->dst.reg);
ea = code->src.literal;
res = rd + ea;
SET_L_REG (code->dst.reg, res);
goto just_flags_inc32;
case O (O_LDC, SB): /* ldc.b */
if (fetch (sd, &code->src, &res))
goto end;
goto setc;
case O (O_LDC, SW): /* ldc.w */
if (fetch (sd, &code->src, &res))
goto end;
/* Word operand, value from MSB, must be shifted. */
res >>= 8;
goto setc;
case O (O_LDC, SL): /* ldc.l */
if (fetch (sd, &code->src, &res))
goto end;
switch (code->dst.type) {
case X (OP_SBR, SL):
h8_set_sbr (sd, res);
break;
case X (OP_VBR, SL):
h8_set_vbr (sd, res);
break;
default:
goto illegal;
}
goto next;
case O (O_STC, SW): /* stc.w */
case O (O_STC, SB): /* stc.b */
if (code->src.type == X (OP_CCR, SB))
{
BUILDSR (sd);
res = h8_get_ccr (sd);
}
else if (code->src.type == X (OP_EXR, SB) && h8300smode)
{
if (h8300smode)
h8_set_exr (sd, (trace << 7) | intMask);
res = h8_get_exr (sd);
}
else
goto illegal;
/* Word operand, value to MSB, must be shifted. */
if (code->opcode == X (O_STC, SW))
res <<= 8;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_STC, SL): /* stc.l */
switch (code->src.type) {
case X (OP_SBR, SL):
res = h8_get_sbr (sd);
break;
case X (OP_VBR, SL):
res = h8_get_vbr (sd);
break;
default:
goto illegal;
}
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_ANDC, SB): /* andc.b */
if (code->dst.type == X (OP_CCR, SB))
{
BUILDSR (sd);
rd = h8_get_ccr (sd);
}
else if (code->dst.type == X (OP_EXR, SB) && h8300smode)
{
if (h8300smode)
h8_set_exr (sd, (trace << 7) | intMask);
rd = h8_get_exr (sd);
}
else
goto illegal;
ea = code->src.literal;
res = rd & ea;
goto setc;
case O (O_ORC, SB): /* orc.b */
if (code->dst.type == X (OP_CCR, SB))
{
BUILDSR (sd);
rd = h8_get_ccr (sd);
}
else if (code->dst.type == X (OP_EXR, SB) && h8300smode)
{
if (h8300smode)
h8_set_exr (sd, (trace << 7) | intMask);
rd = h8_get_exr (sd);
}
else
goto illegal;
ea = code->src.literal;
res = rd | ea;
goto setc;
case O (O_XORC, SB): /* xorc.b */
if (code->dst.type == X (OP_CCR, SB))
{
BUILDSR (sd);
rd = h8_get_ccr (sd);
}
else if (code->dst.type == X (OP_EXR, SB) && h8300smode)
{
if (h8300smode)
h8_set_exr (sd, (trace << 7) | intMask);
rd = h8_get_exr (sd);
}
else
goto illegal;
ea = code->src.literal;
res = rd ^ ea;
goto setc;
case O (O_BRAS, SB): /* bra/s */
/* This is basically an ordinary branch, with a delay slot. */
if (fetch (sd, &code->src, &res))
goto end;
if ((res & 1) == 0)
goto illegal;
res -= 1;
/* Execution continues at next instruction, but
delayed_branch is set up for next cycle. */
h8_set_delayed_branch (sd, code->next_pc + res);
pc = code->next_pc;
goto end;
case O (O_BRAB, SB): /* bra rd.b */
case O (O_BRAW, SW): /* bra rd.w */
case O (O_BRAL, SL): /* bra erd.l */
if (fetch (sd, &code->src, &rd))
goto end;
switch (OP_SIZE (code->opcode)) {
case SB: rd &= 0xff; break;
case SW: rd &= 0xffff; break;
case SL: rd &= 0xffffffff; break;
}
pc = code->next_pc + rd;
goto end;
case O (O_BRABC, SB): /* bra/bc, branch if bit clear */
case O (O_BRABS, SB): /* bra/bs, branch if bit set */
case O (O_BSRBC, SB): /* bsr/bc, call if bit clear */
case O (O_BSRBS, SB): /* bsr/bs, call if bit set */
if (fetch (sd, &code->dst, &rd) ||
fetch (sd, &code->src, &bit))
goto end;
if (code->opcode == O (O_BRABC, SB) || /* branch if clear */
code->opcode == O (O_BSRBC, SB)) /* call if clear */
{
if ((rd & (1 << bit))) /* no branch */
goto next;
}
else /* branch/call if set */
{
if (!(rd & (1 << bit))) /* no branch */
goto next;
}
if (fetch (sd, &code->op3, &res)) /* branch */
goto end;
pc = code->next_pc + res;
if (code->opcode == O (O_BRABC, SB) ||
code->opcode == O (O_BRABS, SB)) /* branch */
goto end;
else /* call */
goto call;
case O (O_BRA, SN):
case O (O_BRA, SL):
case O (O_BRA, SW):
case O (O_BRA, SB): /* bra, branch always */
if (1)
goto condtrue;
goto next;
case O (O_BRN, SB): /* brn, ;-/ branch never? */
if (0)
goto condtrue;
goto next;
case O (O_BHI, SB): /* bhi */
if ((C || Z) == 0)
goto condtrue;
goto next;
case O (O_BLS, SB): /* bls */
if ((C || Z))
goto condtrue;
goto next;
case O (O_BCS, SB): /* bcs, branch if carry set */
if ((C == 1))
goto condtrue;
goto next;
case O (O_BCC, SB): /* bcc, branch if carry clear */
if ((C == 0))
goto condtrue;
goto next;
case O (O_BEQ, SB): /* beq, branch if zero set */
if (Z)
goto condtrue;
goto next;
case O (O_BGT, SB): /* bgt */
if (((Z || (N ^ V)) == 0))
goto condtrue;
goto next;
case O (O_BLE, SB): /* ble */
if (((Z || (N ^ V)) == 1))
goto condtrue;
goto next;
case O (O_BGE, SB): /* bge */
if ((N ^ V) == 0)
goto condtrue;
goto next;
case O (O_BLT, SB): /* blt */
if ((N ^ V))
goto condtrue;
goto next;
case O (O_BMI, SB): /* bmi */
if ((N))
goto condtrue;
goto next;
case O (O_BNE, SB): /* bne, branch if zero clear */
if ((Z == 0))
goto condtrue;
goto next;
case O (O_BPL, SB): /* bpl */
if (N == 0)
goto condtrue;
goto next;
case O (O_BVC, SB): /* bvc */
if ((V == 0))
goto condtrue;
goto next;
case O (O_BVS, SB): /* bvs */
if ((V == 1))
goto condtrue;
goto next;
/* Trap for Command Line setup. */
case O (O_SYS_CMDLINE, SB):
{
int i = 0; /* Loop counter. */
int j = 0; /* Loop counter. */
int ind_arg_len = 0; /* Length of each argument. */
int no_of_args = 0; /* The no. or cmdline args. */
int current_location = 0; /* Location of string. */
int old_sp = 0; /* The Initial Stack Pointer. */
int no_of_slots = 0; /* No. of slots required on the stack
for storing cmdline args. */
int sp_move = 0; /* No. of locations by which the stack needs
to grow. */
int new_sp = 0; /* The final stack pointer location passed
back. */
int *argv_ptrs; /* Pointers of argv strings to be stored. */
int argv_ptrs_location = 0; /* Location of pointers to cmdline
args on the stack. */
int char_ptr_size = 0; /* Size of a character pointer on
target machine. */
int addr_cmdline = 0; /* Memory location where cmdline has
to be stored. */
int size_cmdline = 0; /* Size of cmdline. */
/* Set the address of 256 free locations where command line is
stored. */
addr_cmdline = cmdline_location();
h8_set_reg (sd, 0, addr_cmdline);
/* Counting the no. of commandline arguments. */
for (i = 0; h8_get_cmdline_arg (sd, i) != NULL; i++)
continue;
/* No. of arguments in the command line. */
no_of_args = i;
/* Current location is just a temporary variable,which we are
setting to the point to the start of our commandline string. */
current_location = addr_cmdline;
/* Allocating space for storing pointers of the command line
arguments. */
argv_ptrs = (int *) malloc (sizeof (int) * no_of_args);
/* Setting char_ptr_size to the sizeof (char *) on the different
architectures. */
if ((h8300hmode || h8300smode) && !h8300_normal_mode)
{
char_ptr_size = 4;
}
else
{
char_ptr_size = 2;
}
for (i = 0; i < no_of_args; i++)
{
ind_arg_len = 0;
/* The size of the commandline argument. */
ind_arg_len = strlen (h8_get_cmdline_arg (sd, i)) + 1;
/* The total size of the command line string. */
size_cmdline += ind_arg_len;
/* As we have only 256 bytes, we need to provide a graceful
exit. Anyways, a program using command line arguments
where we cannot store all the command line arguments
given may behave unpredictably. */
if (size_cmdline >= 256)
{
h8_set_reg (sd, 0, 0);
goto next;
}
else
{
/* current_location points to the memory where the next
commandline argument is stored. */
argv_ptrs[i] = current_location;
for (j = 0; j < ind_arg_len; j++)
{
SET_MEMORY_B ((current_location +
(sizeof (char) * j)),
*(h8_get_cmdline_arg (sd, i) +
sizeof (char) * j));
}
/* Setting current_location to the starting of next
argument. */
current_location += ind_arg_len;
}
}
/* This is the original position of the stack pointer. */
old_sp = h8_get_reg (sd, SP_REGNUM);
/* We need space from the stack to store the pointers to argvs. */
/* As we will infringe on the stack, we need to shift the stack
pointer so that the data is not overwritten. We calculate how
much space is required. */
sp_move = (no_of_args) * (char_ptr_size);
/* The final position of stack pointer, we have thus taken some
space from the stack. */
new_sp = old_sp - sp_move;
/* Temporary variable holding value where the argv pointers need
to be stored. */
argv_ptrs_location = new_sp;
/* The argv pointers are stored at sequential locations. As per
the H8300 ABI. */
for (i = 0; i < no_of_args; i++)
{
/* Saving the argv pointer. */
if ((h8300hmode || h8300smode) && !h8300_normal_mode)
{
SET_MEMORY_L (argv_ptrs_location, argv_ptrs[i]);
}
else
{
SET_MEMORY_W (argv_ptrs_location, argv_ptrs[i]);
}
/* The next location where the pointer to the next argv
string has to be stored. */
argv_ptrs_location += char_ptr_size;
}
/* Required by POSIX, Setting 0x0 at the end of the list of argv
pointers. */
if ((h8300hmode || h8300smode) && !h8300_normal_mode)
{
SET_MEMORY_L (old_sp, 0x0);
}
else
{
SET_MEMORY_W (old_sp, 0x0);
}
/* Freeing allocated memory. */
free (argv_ptrs);
for (i = 0; i <= no_of_args; i++)
{
free (h8_get_cmdline_arg (sd, i));
}
free (h8_get_command_line (sd));
/* The no. of argv arguments are returned in Reg 0. */
h8_set_reg (sd, 0, no_of_args);
/* The Pointer to argv in Register 1. */
h8_set_reg (sd, 1, new_sp);
/* Setting the stack pointer to the new value. */
h8_set_reg (sd, SP_REGNUM, new_sp);
}
goto next;
/* System call processing starts. */
case O (O_SYS_OPEN, SB):
{
int len = 0; /* Length of filename. */
char *filename; /* Filename would go here. */
char temp_char; /* Temporary character */
int mode = 0; /* Mode bits for the file. */
int open_return; /* Return value of open, file descriptor. */
int i; /* Loop counter */
int filename_ptr; /* Pointer to filename in cpu memory. */
/* Setting filename_ptr to first argument of open, */
/* and trying to get mode. */
if ((h8300sxmode || h8300hmode || h8300smode) && !h8300_normal_mode)
{
filename_ptr = GET_L_REG (0);
mode = GET_MEMORY_L (h8_get_reg (sd, SP_REGNUM) + 4);
}
else
{
filename_ptr = GET_W_REG (0);
mode = GET_MEMORY_W (h8_get_reg (sd, SP_REGNUM) + 2);
}
/* Trying to find the length of the filename. */
temp_char = GET_MEMORY_B (h8_get_reg (sd, 0));
len = 1;
while (temp_char != '\0')
{
temp_char = GET_MEMORY_B (filename_ptr + len);
len++;
}
/* Allocating space for the filename. */
filename = (char *) malloc (sizeof (char) * len);
/* String copying the filename from memory. */
for (i = 0; i < len; i++)
{
temp_char = GET_MEMORY_B (filename_ptr + i);
filename[i] = temp_char;
}
/* Callback to open and return the file descriptor. */
open_return = sim_callback->open (sim_callback, filename, mode);
/* Return value in register 0. */
h8_set_reg (sd, 0, open_return);
/* Freeing memory used for filename. */
free (filename);
}
goto next;
case O (O_SYS_READ, SB):
{
char *char_ptr; /* Where characters read would be stored. */
int fd; /* File descriptor */
int buf_size; /* BUF_SIZE parameter in read. */
int i = 0; /* Temporary Loop counter */
int read_return = 0; /* Return value from callback to
read. */
fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
buf_size = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (2) : GET_W_REG (2);
char_ptr = (char *) malloc (sizeof (char) * buf_size);
/* Callback to read and return the no. of characters read. */
read_return =
sim_callback->read (sim_callback, fd, char_ptr, buf_size);
/* The characters read are stored in cpu memory. */
for (i = 0; i < buf_size; i++)
{
SET_MEMORY_B ((h8_get_reg (sd, 1) + (sizeof (char) * i)),
*(char_ptr + (sizeof (char) * i)));
}
/* Return value in Register 0. */
h8_set_reg (sd, 0, read_return);
/* Freeing memory used as buffer. */
free (char_ptr);
}
goto next;
case O (O_SYS_WRITE, SB):
{
int fd; /* File descriptor */
char temp_char; /* Temporary character */
int len; /* Length of write, Parameter II to write. */
int char_ptr; /* Character Pointer, Parameter I of write. */
char *ptr; /* Where characters to be written are stored.
*/
int write_return; /* Return value from callback to write. */
int i = 0; /* Loop counter */
fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
char_ptr = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (1) : GET_W_REG (1);
len = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (2) : GET_W_REG (2);
/* Allocating space for the characters to be written. */
ptr = (char *) malloc (sizeof (char) * len);
/* Fetching the characters from cpu memory. */
for (i = 0; i < len; i++)
{
temp_char = GET_MEMORY_B (char_ptr + i);
ptr[i] = temp_char;
}
/* Callback write and return the no. of characters written. */
write_return = sim_callback->write (sim_callback, fd, ptr, len);
/* Return value in Register 0. */
h8_set_reg (sd, 0, write_return);
/* Freeing memory used as buffer. */
free (ptr);
}
goto next;
case O (O_SYS_LSEEK, SB):
{
int fd; /* File descriptor */
int offset; /* Offset */
int origin; /* Origin */
int lseek_return; /* Return value from callback to lseek. */
fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
offset = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (1) : GET_W_REG (1);
origin = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (2) : GET_W_REG (2);
/* Callback lseek and return offset. */
lseek_return =
sim_callback->lseek (sim_callback, fd, offset, origin);
/* Return value in register 0. */
h8_set_reg (sd, 0, lseek_return);
}
goto next;
case O (O_SYS_CLOSE, SB):
{
int fd; /* File descriptor */
int close_return; /* Return value from callback to close. */
fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
/* Callback close and return. */
close_return = sim_callback->close (sim_callback, fd);
/* Return value in register 0. */
h8_set_reg (sd, 0, close_return);
}
goto next;
case O (O_SYS_FSTAT, SB):
{
int fd; /* File descriptor */
struct stat stat_rec; /* Stat record */
int fstat_return; /* Return value from callback to stat. */
int stat_ptr; /* Pointer to stat record. */
char *temp_stat_ptr; /* Temporary stat_rec pointer. */
fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
/* Setting stat_ptr to second argument of stat. */
stat_ptr = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (1) : GET_W_REG (1);
/* Callback stat and return. */
callback.h:struct host_callback_struct compilation error on Windows hosts. On Windows, a recent gnulib update imported the lstat module, and this caused a remote-sim.c build failure in struct host_callback_struct: In file included from /[...]/gdb/remote-sim.c:34:0: /[...]/gdb/../include/gdb/callback.h:93:9: error: duplicate member '_stati64' int (*lstat) (host_callback *, const char *, struct stat *); ^ What happens it that gnulib's stat.h makes the following defines: /* Large File Support on native Windows. */ #if 1 # define stat _stati64 #endif and then: #if 1 # if ! 0 /* mingw does not support symlinks, therefore it does not have lstat. But without links, stat does just fine. */ # if !(defined __cplusplus && defined GNULIB_NAMESPACE) # define lstat stat # endif So, the following fields in struct host_callback_struct... int (*stat) (host_callback *, const char *, struct stat *); int (*fstat) (host_callback *, int, struct stat *); int (*lstat) (host_callback *, const char *, struct stat *); ... get translated to... int (*_stati64) (host_callback *, const char *, struct _stati64 *); int (*_fstati64) (host_callback *, int, struct _stati64 *); int (*_stati64) (host_callback *, const char *, struct _stati64 *); ... which causes two fields to have the same name. This patch fixes the issue by renaming the stat-related fields by adding a "to_" prefix, similar to what is done in GDB's target_ops vector. include/gdb/ChangeLog: * callback.h (struct host_callback_struct) <to_stat>: Renamed from "stat". <to_fstat>: Renamed from "fstat". <to_lstat>: Renamed from "lstat". sim/common/ChangeLog: * sim-io.c (sim_io_stat, sim_io_fstat): Adjust calls to "stat" and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks following renaming in callback.h. * syscall.c (cb_syscall): Likewise. Adjust calls to "lstat" callback by call to "to_lstat" callback sim/cris/ChangeLog: * traps.c (cris_break_13_handler): Adjust call to "fstat" callback by call to "to_fstat" following renaming in callback.h. sim/h8300/ChangeLog: * compile.c (sim_resume): Adjust calls to "stat" and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks following renaming in callback.h.
2014-12-03 15:33:13 +08:00
fstat_return = sim_callback->to_fstat (sim_callback, fd,
&stat_rec);
/* Have stat_ptr point to starting of stat_rec. */
temp_stat_ptr = (char *) (&stat_rec);
/* Setting up the stat structure returned. */
SET_MEMORY_W (stat_ptr, stat_rec.st_dev);
stat_ptr += 2;
SET_MEMORY_W (stat_ptr, stat_rec.st_ino);
stat_ptr += 2;
SET_MEMORY_L (stat_ptr, stat_rec.st_mode);
stat_ptr += 4;
SET_MEMORY_W (stat_ptr, stat_rec.st_nlink);
stat_ptr += 2;
SET_MEMORY_W (stat_ptr, stat_rec.st_uid);
stat_ptr += 2;
SET_MEMORY_W (stat_ptr, stat_rec.st_gid);
stat_ptr += 2;
SET_MEMORY_W (stat_ptr, stat_rec.st_rdev);
stat_ptr += 2;
SET_MEMORY_L (stat_ptr, stat_rec.st_size);
stat_ptr += 4;
SET_MEMORY_L (stat_ptr, stat_rec.st_atime);
stat_ptr += 8;
SET_MEMORY_L (stat_ptr, stat_rec.st_mtime);
stat_ptr += 8;
SET_MEMORY_L (stat_ptr, stat_rec.st_ctime);
/* Return value in register 0. */
h8_set_reg (sd, 0, fstat_return);
}
goto next;
case O (O_SYS_STAT, SB):
{
int len = 0; /* Length of filename. */
char *filename; /* Filename would go here. */
char temp_char; /* Temporary character */
int filename_ptr; /* Pointer to filename in cpu memory. */
struct stat stat_rec; /* Stat record */
int stat_return; /* Return value from callback to stat */
int stat_ptr; /* Pointer to stat record. */
char *temp_stat_ptr; /* Temporary stat_rec pointer. */
int i = 0; /* Loop Counter */
/* Setting filename_ptr to first argument of open. */
filename_ptr = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
/* Trying to find the length of the filename. */
temp_char = GET_MEMORY_B (h8_get_reg (sd, 0));
len = 1;
while (temp_char != '\0')
{
temp_char = GET_MEMORY_B (filename_ptr + len);
len++;
}
/* Allocating space for the filename. */
filename = (char *) malloc (sizeof (char) * len);
2002-05-18 19:40:19 +08:00
/* String copying the filename from memory. */
for (i = 0; i < len; i++)
{
temp_char = GET_MEMORY_B (filename_ptr + i);
filename[i] = temp_char;
}
/* Setting stat_ptr to second argument of stat. */
/* stat_ptr = h8_get_reg (sd, 1); */
stat_ptr = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (1) : GET_W_REG (1);
/* Callback stat and return. */
stat_return =
callback.h:struct host_callback_struct compilation error on Windows hosts. On Windows, a recent gnulib update imported the lstat module, and this caused a remote-sim.c build failure in struct host_callback_struct: In file included from /[...]/gdb/remote-sim.c:34:0: /[...]/gdb/../include/gdb/callback.h:93:9: error: duplicate member '_stati64' int (*lstat) (host_callback *, const char *, struct stat *); ^ What happens it that gnulib's stat.h makes the following defines: /* Large File Support on native Windows. */ #if 1 # define stat _stati64 #endif and then: #if 1 # if ! 0 /* mingw does not support symlinks, therefore it does not have lstat. But without links, stat does just fine. */ # if !(defined __cplusplus && defined GNULIB_NAMESPACE) # define lstat stat # endif So, the following fields in struct host_callback_struct... int (*stat) (host_callback *, const char *, struct stat *); int (*fstat) (host_callback *, int, struct stat *); int (*lstat) (host_callback *, const char *, struct stat *); ... get translated to... int (*_stati64) (host_callback *, const char *, struct _stati64 *); int (*_fstati64) (host_callback *, int, struct _stati64 *); int (*_stati64) (host_callback *, const char *, struct _stati64 *); ... which causes two fields to have the same name. This patch fixes the issue by renaming the stat-related fields by adding a "to_" prefix, similar to what is done in GDB's target_ops vector. include/gdb/ChangeLog: * callback.h (struct host_callback_struct) <to_stat>: Renamed from "stat". <to_fstat>: Renamed from "fstat". <to_lstat>: Renamed from "lstat". sim/common/ChangeLog: * sim-io.c (sim_io_stat, sim_io_fstat): Adjust calls to "stat" and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks following renaming in callback.h. * syscall.c (cb_syscall): Likewise. Adjust calls to "lstat" callback by call to "to_lstat" callback sim/cris/ChangeLog: * traps.c (cris_break_13_handler): Adjust call to "fstat" callback by call to "to_fstat" following renaming in callback.h. sim/h8300/ChangeLog: * compile.c (sim_resume): Adjust calls to "stat" and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks following renaming in callback.h.
2014-12-03 15:33:13 +08:00
sim_callback->to_stat (sim_callback, filename, &stat_rec);
/* Have stat_ptr point to starting of stat_rec. */
temp_stat_ptr = (char *) (&stat_rec);
/* Freeing memory used for filename. */
free (filename);
/* Setting up the stat structure returned. */
SET_MEMORY_W (stat_ptr, stat_rec.st_dev);
stat_ptr += 2;
SET_MEMORY_W (stat_ptr, stat_rec.st_ino);
stat_ptr += 2;
SET_MEMORY_L (stat_ptr, stat_rec.st_mode);
stat_ptr += 4;
SET_MEMORY_W (stat_ptr, stat_rec.st_nlink);
stat_ptr += 2;
SET_MEMORY_W (stat_ptr, stat_rec.st_uid);
stat_ptr += 2;
SET_MEMORY_W (stat_ptr, stat_rec.st_gid);
stat_ptr += 2;
SET_MEMORY_W (stat_ptr, stat_rec.st_rdev);
stat_ptr += 2;
SET_MEMORY_L (stat_ptr, stat_rec.st_size);
stat_ptr += 4;
SET_MEMORY_L (stat_ptr, stat_rec.st_atime);
stat_ptr += 8;
SET_MEMORY_L (stat_ptr, stat_rec.st_mtime);
stat_ptr += 8;
SET_MEMORY_L (stat_ptr, stat_rec.st_ctime);
/* Return value in register 0. */
h8_set_reg (sd, 0, stat_return);
}
goto next;
/* End of system call processing. */
case O (O_NOT, SB): /* not.b */
if (fetch2 (sd, &code->src, &rd))
goto end;
rd = ~rd;
v = 0;
goto shift8;
case O (O_NOT, SW): /* not.w */
if (fetch2 (sd, &code->src, &rd))
goto end;
rd = ~rd;
v = 0;
goto shift16;
case O (O_NOT, SL): /* not.l */
if (fetch2 (sd, &code->src, &rd))
goto end;
rd = ~rd;
v = 0;
goto shift32;
case O (O_SHLL, SB): /* shll.b */
case O (O_SHLR, SB): /* shlr.b */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (memcmp (&code->src, &code->dst, sizeof (code->src)) == 0)
ea = 1; /* unary op */
else /* binary op */
fetch (sd, &code->src, &ea);
if (code->opcode == O (O_SHLL, SB))
{
v = (ea > 8);
c = rd & (0x80 >> (ea - 1));
rd <<= ea;
}
else
{
v = 0;
c = rd & (1 << (ea - 1));
rd = (unsigned char) rd >> ea;
}
goto shift8;
case O (O_SHLL, SW): /* shll.w */
case O (O_SHLR, SW): /* shlr.w */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (memcmp (&code->src, &code->dst, sizeof (code->src)) == 0)
ea = 1; /* unary op */
else
fetch (sd, &code->src, &ea);
if (code->opcode == O (O_SHLL, SW))
{
v = (ea > 16);
c = rd & (0x8000 >> (ea - 1));
rd <<= ea;
}
else
{
v = 0;
c = rd & (1 << (ea - 1));
rd = (unsigned short) rd >> ea;
}
goto shift16;
case O (O_SHLL, SL): /* shll.l */
case O (O_SHLR, SL): /* shlr.l */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (memcmp (&code->src, &code->dst, sizeof (code->src)) == 0)
ea = 1; /* unary op */
else
fetch (sd, &code->src, &ea);
if (code->opcode == O (O_SHLL, SL))
2002-05-18 19:40:19 +08:00
{
v = (ea > 32);
c = rd & (0x80000000 >> (ea - 1));
rd <<= ea;
2002-05-18 19:40:19 +08:00
}
else
2002-05-18 19:40:19 +08:00
{
v = 0;
c = rd & (1 << (ea - 1));
rd = (unsigned int) rd >> ea;
2002-05-18 19:40:19 +08:00
}
goto shift32;
case O (O_SHAL, SB):
case O (O_SHAR, SB):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SB))
fetch (sd, &code->src, &ea);
2002-05-18 19:40:19 +08:00
else
ea = 1;
if (code->opcode == O (O_SHAL, SB))
2002-05-18 19:40:19 +08:00
{
c = rd & (0x80 >> (ea - 1));
res = rd >> (7 - ea);
v = ((res & 1) && !(res & 2))
|| (!(res & 1) && (res & 2));
rd <<= ea;
2002-05-18 19:40:19 +08:00
}
else
2002-05-18 19:40:19 +08:00
{
c = rd & (1 << (ea - 1));
v = 0;
rd = ((signed char) rd) >> ea;
2002-05-18 19:40:19 +08:00
}
goto shift8;
case O (O_SHAL, SW):
case O (O_SHAR, SW):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SW))
fetch (sd, &code->src, &ea);
2002-05-18 19:40:19 +08:00
else
ea = 1;
if (code->opcode == O (O_SHAL, SW))
2002-05-18 19:40:19 +08:00
{
c = rd & (0x8000 >> (ea - 1));
res = rd >> (15 - ea);
v = ((res & 1) && !(res & 2))
|| (!(res & 1) && (res & 2));
rd <<= ea;
2002-05-18 19:40:19 +08:00
}
else
2002-05-18 19:40:19 +08:00
{
c = rd & (1 << (ea - 1));
v = 0;
rd = ((signed short) rd) >> ea;
2002-05-18 19:40:19 +08:00
}
goto shift16;
case O (O_SHAL, SL):
case O (O_SHAR, SL):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SL))
fetch (sd, &code->src, &ea);
else
ea = 1;
if (code->opcode == O (O_SHAL, SL))
2002-05-18 19:40:19 +08:00
{
c = rd & (0x80000000 >> (ea - 1));
res = rd >> (31 - ea);
v = ((res & 1) && !(res & 2))
|| (!(res & 1) && (res & 2));
rd <<= ea;
2002-05-18 19:40:19 +08:00
}
else
2002-05-18 19:40:19 +08:00
{
c = rd & (1 << (ea - 1));
v = 0;
rd = ((signed int) rd) >> ea;
2002-05-18 19:40:19 +08:00
}
goto shift32;
case O (O_ROTL, SB):
case O (O_ROTR, SB):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SB))
fetch (sd, &code->src, &ea);
else
ea = 1;
while (ea--)
if (code->opcode == O (O_ROTL, SB))
{
c = rd & 0x80;
rd <<= 1;
if (c)
rd |= 1;
}
else
{
c = rd & 1;
rd = ((unsigned char) rd) >> 1;
if (c)
rd |= 0x80;
}
v = 0;
goto shift8;
case O (O_ROTL, SW):
case O (O_ROTR, SW):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SW))
fetch (sd, &code->src, &ea);
else
ea = 1;
while (ea--)
if (code->opcode == O (O_ROTL, SW))
{
c = rd & 0x8000;
rd <<= 1;
if (c)
rd |= 1;
}
else
{
c = rd & 1;
rd = ((unsigned short) rd) >> 1;
if (c)
rd |= 0x8000;
}
v = 0;
goto shift16;
case O (O_ROTL, SL):
case O (O_ROTR, SL):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SL))
fetch (sd, &code->src, &ea);
else
ea = 1;
while (ea--)
if (code->opcode == O (O_ROTL, SL))
{
c = rd & 0x80000000;
rd <<= 1;
if (c)
rd |= 1;
}
else
{
c = rd & 1;
rd = ((unsigned int) rd) >> 1;
if (c)
rd |= 0x80000000;
}
v = 0;
goto shift32;
case O (O_ROTXL, SB):
case O (O_ROTXR, SB):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SB))
fetch (sd, &code->src, &ea);
else
ea = 1;
while (ea--)
if (code->opcode == O (O_ROTXL, SB))
{
res = rd & 0x80;
rd <<= 1;
if (C)
rd |= 1;
c = res;
}
else
{
res = rd & 1;
rd = ((unsigned char) rd) >> 1;
if (C)
rd |= 0x80;
c = res;
}
v = 0;
goto shift8;
case O (O_ROTXL, SW):
case O (O_ROTXR, SW):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SW))
fetch (sd, &code->src, &ea);
else
ea = 1;
while (ea--)
if (code->opcode == O (O_ROTXL, SW))
{
res = rd & 0x8000;
rd <<= 1;
if (C)
rd |= 1;
c = res;
}
else
{
res = rd & 1;
rd = ((unsigned short) rd) >> 1;
if (C)
rd |= 0x8000;
c = res;
}
v = 0;
goto shift16;
case O (O_ROTXL, SL):
case O (O_ROTXR, SL):
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SL))
fetch (sd, &code->src, &ea);
else
ea = 1;
while (ea--)
if (code->opcode == O (O_ROTXL, SL))
{
res = rd & 0x80000000;
rd <<= 1;
if (C)
rd |= 1;
c = res;
}
else
{
res = rd & 1;
rd = ((unsigned int) rd) >> 1;
if (C)
rd |= 0x80000000;
c = res;
}
v = 0;
goto shift32;
case O (O_JMP, SN):
case O (O_JMP, SL):
case O (O_JMP, SB): /* jmp */
case O (O_JMP, SW):
fetch (sd, &code->src, &pc);
goto end;
case O (O_JSR, SN):
case O (O_JSR, SL):
case O (O_JSR, SB): /* jsr, jump to subroutine */
case O (O_JSR, SW):
if (fetch (sd, &code->src, &pc))
goto end;
call:
tmp = h8_get_reg (sd, SP_REGNUM);
if (h8300hmode && !h8300_normal_mode)
{
tmp -= 4;
SET_MEMORY_L (tmp, code->next_pc);
}
else
{
tmp -= 2;
SET_MEMORY_W (tmp, code->next_pc);
}
h8_set_reg (sd, SP_REGNUM, tmp);
goto end;
case O (O_BSR, SW):
case O (O_BSR, SL):
case O (O_BSR, SB): /* bsr, branch to subroutine */
if (fetch (sd, &code->src, &res))
goto end;
pc = code->next_pc + res;
goto call;
case O (O_RTE, SN): /* rte, return from exception */
rte:
/* Pops exr and ccr before pc -- otherwise identical to rts. */
tmp = h8_get_reg (sd, SP_REGNUM);
if (h8300smode) /* pop exr */
{
h8_set_exr (sd, GET_MEMORY_L (tmp));
tmp += 4;
}
if (h8300hmode && !h8300_normal_mode)
{
h8_set_ccr (sd, GET_MEMORY_L (tmp));
tmp += 4;
pc = GET_MEMORY_L (tmp);
tmp += 4;
}
else
{
h8_set_ccr (sd, GET_MEMORY_W (tmp));
tmp += 2;
pc = GET_MEMORY_W (tmp);
tmp += 2;
}
GETSR (sd);
h8_set_reg (sd, SP_REGNUM, tmp);
goto end;
case O (O_RTS, SN): /* rts, return from subroutine */
rts:
tmp = h8_get_reg (sd, SP_REGNUM);
if (h8300hmode && !h8300_normal_mode)
{
pc = GET_MEMORY_L (tmp);
tmp += 4;
}
else
{
pc = GET_MEMORY_W (tmp);
tmp += 2;
}
h8_set_reg (sd, SP_REGNUM, tmp);
goto end;
case O (O_ILL, SB): /* illegal */
sim_engine_halt (sd, cpu, NULL, pc, sim_stopped, SIM_SIGILL);
goto end;
case O (O_SLEEP, SN): /* sleep */
/* Check for magic numbers in r1 and r2. */
if ((h8_get_reg (sd, R1_REGNUM) & 0xffff) == LIBC_EXIT_MAGIC1 &&
(h8_get_reg (sd, R2_REGNUM) & 0xffff) == LIBC_EXIT_MAGIC2 &&
SIM_WIFEXITED (h8_get_reg (sd, 0)))
{
/* This trap comes from _exit, not from gdb. */
sim_engine_halt (sd, cpu, NULL, pc, sim_exited,
SIM_WEXITSTATUS (h8_get_reg (sd, 0)));
}
#if 0
/* Unfortunately this won't really work, because
when we take a breakpoint trap, R0 has a "random",
user-defined value. Don't see any immediate solution. */
else if (SIM_WIFSTOPPED (h8_get_reg (sd, 0)))
{
/* Pass the stop signal up to gdb. */
sim_engine_halt (sd, cpu, NULL, pc, sim_stopped,
SIM_WSTOPSIG (h8_get_reg (sd, 0)));
}
#endif
else
{
/* Treat it as a sigtrap. */
sim_engine_halt (sd, cpu, NULL, pc, sim_stopped, SIM_SIGTRAP);
}
goto end;
case O (O_TRAPA, SB): /* trapa */
if (fetch (sd, &code->src, &res))
goto end; /* res is vector number. */
tmp = h8_get_reg (sd, SP_REGNUM);
if(h8300_normal_mode)
{
tmp -= 2;
SET_MEMORY_W (tmp, code->next_pc);
tmp -= 2;
SET_MEMORY_W (tmp, h8_get_ccr (sd));
}
else
{
tmp -= 4;
SET_MEMORY_L (tmp, code->next_pc);
tmp -= 4;
SET_MEMORY_L (tmp, h8_get_ccr (sd));
}
intMaskBit = 1;
BUILDSR (sd);
if (h8300smode)
{
tmp -= 4;
SET_MEMORY_L (tmp, h8_get_exr (sd));
}
h8_set_reg (sd, SP_REGNUM, tmp);
if(h8300_normal_mode)
pc = GET_MEMORY_L (0x10 + res * 2); /* Vector addresses are 0x10,0x12,0x14 and 0x16 */
else
pc = GET_MEMORY_L (0x20 + res * 4);
goto end;
case O (O_BPT, SN):
sim_engine_halt (sd, cpu, NULL, pc, sim_stopped, SIM_SIGTRAP);
goto end;
case O (O_BSETEQ, SB):
if (Z)
goto bset;
goto next;
case O (O_BSETNE, SB):
if (!Z)
goto bset;
goto next;
case O (O_BCLREQ, SB):
if (Z)
goto bclr;
goto next;
case O (O_BCLRNE, SB):
if (!Z)
goto bclr;
goto next;
OBITOP (O_BNOT, 1, 1, ea ^= m); /* bnot */
OBITOP (O_BTST, 1, 0, nz = ea & m); /* btst */
bset:
OBITOP (O_BSET, 1, 1, ea |= m); /* bset */
bclr:
OBITOP (O_BCLR, 1, 1, ea &= ~m); /* bclr */
OBITOP (O_BLD, 1, 0, c = ea & m); /* bld */
OBITOP (O_BILD, 1, 0, c = !(ea & m)); /* bild */
OBITOP (O_BST, 1, 1, ea &= ~m;
if (C) ea |= m); /* bst */
OBITOP (O_BIST, 1, 1, ea &= ~m;
if (!C) ea |= m); /* bist */
OBITOP (O_BSTZ, 1, 1, ea &= ~m;
if (Z) ea |= m); /* bstz */
OBITOP (O_BISTZ, 1, 1, ea &= ~m;
if (!Z) ea |= m); /* bistz */
OBITOP (O_BAND, 1, 0, c = (ea & m) && C); /* band */
OBITOP (O_BIAND, 1, 0, c = !(ea & m) && C); /* biand */
OBITOP (O_BOR, 1, 0, c = (ea & m) || C); /* bor */
OBITOP (O_BIOR, 1, 0, c = !(ea & m) || C); /* bior */
OBITOP (O_BXOR, 1, 0, c = ((ea & m) != 0)!= C); /* bxor */
OBITOP (O_BIXOR, 1, 0, c = !(ea & m) != C); /* bixor */
case O (O_BFLD, SB): /* bfld */
/* bitfield load */
ea = 0;
if (fetch (sd, &code->src, &bit))
goto end;
if (bit != 0)
{
if (fetch (sd, &code->dst, &ea))
goto end;
ea &= bit;
while (!(bit & 1))
{
ea >>= 1;
bit >>= 1;
}
}
if (store (sd, &code->op3, ea))
goto end;
goto next;
case O(O_BFST, SB): /* bfst */
/* bitfield store */
/* NOTE: the imm8 value is in dst, and the ea value
(which is actually the destination) is in op3.
It has to be that way, to avoid breaking the assembler. */
if (fetch (sd, &code->dst, &bit)) /* imm8 */
goto end;
if (bit == 0) /* noop -- nothing to do. */
goto next;
if (fetch (sd, &code->src, &rd)) /* reg8 src */
goto end;
if (fetch2 (sd, &code->op3, &ea)) /* ea dst */
goto end;
/* Left-shift the register data into position. */
for (tmp = bit; !(tmp & 1); tmp >>= 1)
rd <<= 1;
/* Combine it with the neighboring bits. */
ea = (ea & ~bit) | (rd & bit);
/* Put it back. */
if (store2 (sd, &code->op3, ea))
goto end;
goto next;
case O (O_CLRMAC, SN): /* clrmac */
h8_set_mach (sd, 0);
h8_set_macl (sd, 0);
h8_set_macZ (sd, 1);
h8_set_macV (sd, 0);
h8_set_macN (sd, 0);
goto next;
case O (O_STMAC, SL): /* stmac, 260 */
switch (code->src.type) {
case X (OP_MACH, SL):
res = h8_get_mach (sd);
if (res & 0x200) /* sign extend */
res |= 0xfffffc00;
break;
case X (OP_MACL, SL):
res = h8_get_macl (sd);
break;
default: goto illegal;
}
nz = !h8_get_macZ (sd);
n = h8_get_macN (sd);
v = h8_get_macV (sd);
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_LDMAC, SL): /* ldmac, 179 */
if (fetch (sd, &code->src, &rd))
goto end;
switch (code->dst.type) {
case X (OP_MACH, SL):
rd &= 0x3ff; /* Truncate to 10 bits */
h8_set_mach (sd, rd);
break;
case X (OP_MACL, SL):
h8_set_macl (sd, rd);
break;
default: goto illegal;
}
h8_set_macV (sd, 0);
goto next;
case O (O_MAC, SW):
if (fetch (sd, &code->src, &rd) ||
fetch (sd, &code->dst, &res))
goto end;
/* Ye gods, this is non-portable!
However, the existing mul/div code is similar. */
res = SEXTSHORT (res) * SEXTSHORT (rd);
if (h8_get_macS (sd)) /* Saturating mode */
{
long long mac = h8_get_macl (sd);
if (mac & 0x80000000) /* sign extend */
mac |= 0xffffffff00000000LL;
mac += res;
if (mac > 0x7fffffff || mac < 0xffffffff80000000LL)
h8_set_macV (sd, 1);
h8_set_macZ (sd, (mac == 0));
h8_set_macN (sd, (mac < 0));
h8_set_macl (sd, (int) mac);
}
else /* "Less Saturating" mode */
{
long long mac = h8_get_mach (sd);
mac <<= 32;
mac += h8_get_macl (sd);
if (mac & 0x20000000000LL) /* sign extend */
mac |= 0xfffffc0000000000LL;
mac += res;
if (mac > 0x1ffffffffffLL ||
mac < (long long) 0xfffffe0000000000LL)
h8_set_macV (sd, 1);
h8_set_macZ (sd, (mac == 0));
h8_set_macN (sd, (mac < 0));
h8_set_macl (sd, (int) mac);
mac >>= 32;
h8_set_mach (sd, (int) (mac & 0x3ff));
}
goto next;
case O (O_MULS, SW): /* muls.w */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
ea = SEXTSHORT (ea);
res = SEXTSHORT (ea * SEXTSHORT (rd));
n = res & 0x8000;
nz = res & 0xffff;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULS, SL): /* muls.l */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
res = ea * rd;
n = res & 0x80000000;
nz = res & 0xffffffff;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULSU, SL): /* muls/u.l */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
/* Compute upper 32 bits of the 64-bit result. */
res = (((long long) ea) * ((long long) rd)) >> 32;
n = res & 0x80000000;
nz = res & 0xffffffff;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULU, SW): /* mulu.w */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
res = UEXTSHORT ((UEXTSHORT (ea) * UEXTSHORT (rd)));
/* Don't set Z or N. */
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULU, SL): /* mulu.l */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
res = ea * rd;
/* Don't set Z or N. */
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULUU, SL): /* mulu/u.l */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
/* Compute upper 32 bits of the 64-bit result. */
res = (((unsigned long long) (unsigned) ea) *
((unsigned long long) (unsigned) rd)) >> 32;
/* Don't set Z or N. */
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULXS, SB): /* mulxs.b */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
ea = SEXTCHAR (ea);
res = ea * SEXTCHAR (rd);
n = res & 0x8000;
nz = res & 0xffff;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULXS, SW): /* mulxs.w */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
ea = SEXTSHORT (ea);
res = ea * SEXTSHORT (rd & 0xffff);
n = res & 0x80000000;
nz = res & 0xffffffff;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULXU, SB): /* mulxu.b */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
res = UEXTCHAR (ea) * UEXTCHAR (rd);
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_MULXU, SW): /* mulxu.w */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
res = UEXTSHORT (ea) * UEXTSHORT (rd);
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_TAS, SB): /* tas (test and set) */
if (!h8300sxmode) /* h8sx can use any register. */
switch (code->src.reg)
{
case R0_REGNUM:
case R1_REGNUM:
case R4_REGNUM:
case R5_REGNUM:
break;
default:
goto illegal;
}
if (fetch (sd, &code->src, &res))
goto end;
if (store (sd, &code->src, res | 0x80))
goto end;
goto just_flags_log8;
case O (O_DIVU, SW): /* divu.w */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
n = ea & 0x8000;
nz = ea & 0xffff;
if (ea)
res = (unsigned) (UEXTSHORT (rd) / UEXTSHORT (ea));
else
res = 0;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_DIVU, SL): /* divu.l */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
n = ea & 0x80000000;
nz = ea & 0xffffffff;
if (ea)
res = (unsigned) rd / ea;
else
res = 0;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_DIVS, SW): /* divs.w */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
if (ea)
{
res = SEXTSHORT (rd) / SEXTSHORT (ea);
nz = 1;
}
else
{
res = 0;
nz = 0;
}
n = res & 0x8000;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_DIVS, SL): /* divs.l */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
if (ea)
{
res = rd / ea;
nz = 1;
}
else
{
res = 0;
nz = 0;
}
n = res & 0x80000000;
if (store (sd, &code->dst, res))
goto end;
goto next;
case O (O_DIVXU, SB): /* divxu.b */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
rd = UEXTSHORT (rd);
ea = UEXTCHAR (ea);
n = ea & 0x80;
nz = ea & 0xff;
if (ea)
{
tmp = (unsigned) rd % ea;
res = (unsigned) rd / ea;
}
else
{
tmp = 0;
res = 0;
}
if (store (sd, &code->dst, (res & 0xff) | (tmp << 8)))
goto end;
goto next;
case O (O_DIVXU, SW): /* divxu.w */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
ea = UEXTSHORT (ea);
n = ea & 0x8000;
nz = ea & 0xffff;
if (ea)
{
tmp = (unsigned) rd % ea;
res = (unsigned) rd / ea;
}
else
{
tmp = 0;
res = 0;
}
if (store (sd, &code->dst, (res & 0xffff) | (tmp << 16)))
goto end;
goto next;
case O (O_DIVXS, SB): /* divxs.b */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
rd = SEXTSHORT (rd);
ea = SEXTCHAR (ea);
if (ea)
{
tmp = (int) rd % (int) ea;
res = (int) rd / (int) ea;
nz = 1;
}
else
{
tmp = 0;
res = 0;
nz = 0;
}
n = res & 0x8000;
if (store (sd, &code->dst, (res & 0xff) | (tmp << 8)))
goto end;
goto next;
case O (O_DIVXS, SW): /* divxs.w */
if (fetch (sd, &code->src, &ea) ||
fetch (sd, &code->dst, &rd))
goto end;
ea = SEXTSHORT (ea);
if (ea)
{
tmp = (int) rd % (int) ea;
res = (int) rd / (int) ea;
nz = 1;
}
else
{
tmp = 0;
res = 0;
nz = 0;
}
n = res & 0x80000000;
if (store (sd, &code->dst, (res & 0xffff) | (tmp << 16)))
goto end;
goto next;
case O (O_EXTS, SW): /* exts.w, signed extend */
if (fetch2 (sd, &code->dst, &rd))
goto end;
ea = rd & 0x80 ? -256 : 0;
res = (rd & 0xff) + ea;
goto log16;
case O (O_EXTS, SL): /* exts.l, signed extend */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SL))
{
if (fetch (sd, &code->src, &ea))
goto end;
if (ea == 2) /* exts.l #2, nn */
{
/* Sign-extend from 8-bit to 32-bit. */
ea = rd & 0x80 ? -256 : 0;
res = (rd & 0xff) + ea;
goto log32;
}
}
/* Sign-extend from 16-bit to 32-bit. */
ea = rd & 0x8000 ? -65536 : 0;
res = (rd & 0xffff) + ea;
goto log32;
case O (O_EXTU, SW): /* extu.w, unsigned extend */
if (fetch2 (sd, &code->dst, &rd))
goto end;
ea = 0;
res = (rd & 0xff) + ea;
goto log16;
case O (O_EXTU, SL): /* extu.l, unsigned extend */
if (fetch2 (sd, &code->dst, &rd))
goto end;
if (code->src.type == X (OP_IMM, SL))
{
if (fetch (sd, &code->src, &ea))
goto end;
if (ea == 2) /* extu.l #2, nn */
{
/* Zero-extend from 8-bit to 32-bit. */
ea = 0;
res = (rd & 0xff) + ea;
goto log32;
}
}
/* Zero-extend from 16-bit to 32-bit. */
ea = 0;
res = (rd & 0xffff) + ea;
goto log32;
case O (O_NOP, SN): /* nop */
goto next;
case O (O_STM, SL): /* stm, store to memory */
{
int nregs, firstreg, i;
nregs = GET_MEMORY_B (pc + 1);
nregs >>= 4;
nregs &= 0xf;
firstreg = code->src.reg;
firstreg &= 0xf;
for (i = firstreg; i <= firstreg + nregs; i++)
{
h8_set_reg (sd, SP_REGNUM, h8_get_reg (sd, SP_REGNUM) - 4);
SET_MEMORY_L (h8_get_reg (sd, SP_REGNUM), h8_get_reg (sd, i));
}
}
goto next;
case O (O_LDM, SL): /* ldm, load from memory */
case O (O_RTEL, SN): /* rte/l, ldm plus rte */
case O (O_RTSL, SN): /* rts/l, ldm plus rts */
{
int nregs, firstreg, i;
nregs = ((GET_MEMORY_B (pc + 1) >> 4) & 0xf);
firstreg = code->dst.reg & 0xf;
for (i = firstreg; i >= firstreg - nregs; i--)
{
h8_set_reg (sd, i, GET_MEMORY_L (h8_get_reg (sd, SP_REGNUM)));
h8_set_reg (sd, SP_REGNUM, h8_get_reg (sd, SP_REGNUM) + 4);
}
}
switch (code->opcode) {
case O (O_RTEL, SN):
goto rte;
case O (O_RTSL, SN):
goto rts;
case O (O_LDM, SL):
goto next;
default:
goto illegal;
}
case O (O_DAA, SB):
/* Decimal Adjust Addition. This is for BCD arithmetic. */
res = GET_B_REG (code->src.reg); /* FIXME fetch? */
if (!c && (0 <= (res >> 4) && (res >> 4) <= 9) &&
!h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
res = res; /* Value added == 0. */
else if (!c && (0 <= (res >> 4) && (res >> 4) <= 8) &&
!h && (10 <= (res & 0xf) && (res & 0xf) <= 15))
res = res + 0x6; /* Value added == 6. */
else if (!c && (0 <= (res >> 4) && (res >> 4) <= 9) &&
h && (0 <= (res & 0xf) && (res & 0xf) <= 3))
res = res + 0x6; /* Value added == 6. */
else if (!c && (10 <= (res >> 4) && (res >> 4) <= 15) &&
!h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
res = res + 0x60; /* Value added == 60. */
else if (!c && (9 <= (res >> 4) && (res >> 4) <= 15) &&
!h && (10 <= (res & 0xf) && (res & 0xf) <= 15))
res = res + 0x66; /* Value added == 66. */
else if (!c && (10 <= (res >> 4) && (res >> 4) <= 15) &&
h && (0 <= (res & 0xf) && (res & 0xf) <= 3))
res = res + 0x66; /* Value added == 66. */
else if ( c && (1 <= (res >> 4) && (res >> 4) <= 2) &&
!h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
res = res + 0x60; /* Value added == 60. */
else if ( c && (1 <= (res >> 4) && (res >> 4) <= 2) &&
!h && (10 <= (res & 0xf) && (res & 0xf) <= 15))
res = res + 0x66; /* Value added == 66. */
else if (c && (1 <= (res >> 4) && (res >> 4) <= 3) &&
h && (0 <= (res & 0xf) && (res & 0xf) <= 3))
res = res + 0x66; /* Value added == 66. */
goto alu8;
case O (O_DAS, SB):
/* Decimal Adjust Subtraction. This is for BCD arithmetic. */
res = GET_B_REG (code->src.reg); /* FIXME fetch, fetch2... */
if (!c && (0 <= (res >> 4) && (res >> 4) <= 9) &&
!h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
res = res; /* Value added == 0. */
else if (!c && (0 <= (res >> 4) && (res >> 4) <= 8) &&
h && (6 <= (res & 0xf) && (res & 0xf) <= 15))
res = res + 0xfa; /* Value added == 0xfa. */
else if ( c && (7 <= (res >> 4) && (res >> 4) <= 15) &&
!h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
res = res + 0xa0; /* Value added == 0xa0. */
else if (c && (6 <= (res >> 4) && (res >> 4) <= 15) &&
h && (6 <= (res & 0xf) && (res & 0xf) <= 15))
res = res + 0x9a; /* Value added == 0x9a. */
goto alu8;
default:
illegal:
sim_engine_halt (sd, cpu, NULL, pc, sim_stopped, SIM_SIGILL);
goto end;
}
sim_io_printf (sd, "sim_resume: internal error.\n");
sim_engine_halt (sd, cpu, NULL, pc, sim_stopped, SIM_SIGILL);
goto end;
setc:
if (code->dst.type == X (OP_CCR, SB) ||
code->dst.type == X (OP_CCR, SW))
2002-05-18 19:40:19 +08:00
{
h8_set_ccr (sd, res);
GETSR (sd);
2002-05-18 19:40:19 +08:00
}
else if (h8300smode &&
(code->dst.type == X (OP_EXR, SB) ||
code->dst.type == X (OP_EXR, SW)))
2002-05-18 19:40:19 +08:00
{
h8_set_exr (sd, res);
if (h8300smode) /* Get exr. */
{
trace = (h8_get_exr (sd) >> 7) & 1;
intMask = h8_get_exr (sd) & 7;
}
2002-05-18 19:40:19 +08:00
}
2002-05-18 03:19:24 +08:00
else
2002-05-18 19:40:19 +08:00
goto illegal;
2002-05-18 03:19:24 +08:00
goto next;
condtrue:
/* When a branch works */
if (fetch (sd, &code->src, &res))
goto end;
if (res & 1) /* bad address */
goto illegal;
pc = code->next_pc + res;
goto end;
/* Set the cond codes from res */
bitop:
/* Set the flags after an 8 bit inc/dec operation */
just_flags_inc8:
n = res & 0x80;
nz = res & 0xff;
v = (rd & 0x7f) == 0x7f;
goto next;
/* Set the flags after an 16 bit inc/dec operation */
just_flags_inc16:
n = res & 0x8000;
nz = res & 0xffff;
v = (rd & 0x7fff) == 0x7fff;
goto next;
/* Set the flags after an 32 bit inc/dec operation */
just_flags_inc32:
n = res & 0x80000000;
nz = res & 0xffffffff;
v = (rd & 0x7fffffff) == 0x7fffffff;
goto next;
shift8:
/* Set flags after an 8 bit shift op, carry,overflow set in insn */
n = (rd & 0x80);
nz = rd & 0xff;
if (store2 (sd, &code->dst, rd))
goto end;
goto next;
shift16:
/* Set flags after an 16 bit shift op, carry,overflow set in insn */
n = (rd & 0x8000);
nz = rd & 0xffff;
if (store2 (sd, &code->dst, rd))
goto end;
goto next;
shift32:
/* Set flags after an 32 bit shift op, carry,overflow set in insn */
n = (rd & 0x80000000);
nz = rd & 0xffffffff;
if (store2 (sd, &code->dst, rd))
goto end;
goto next;
log32:
if (store2 (sd, &code->dst, res))
goto end;
just_flags_log32:
/* flags after a 32bit logical operation */
n = res & 0x80000000;
nz = res & 0xffffffff;
v = 0;
goto next;
log16:
if (store2 (sd, &code->dst, res))
goto end;
just_flags_log16:
/* flags after a 16bit logical operation */
n = res & 0x8000;
nz = res & 0xffff;
v = 0;
goto next;
log8:
if (store2 (sd, &code->dst, res))
goto end;
just_flags_log8:
n = res & 0x80;
nz = res & 0xff;
v = 0;
goto next;
alu8:
if (store2 (sd, &code->dst, res))
goto end;
just_flags_alu8:
n = res & 0x80;
nz = res & 0xff;
c = (res & 0x100);
switch (code->opcode / 4)
{
case O_ADD:
case O_ADDX:
v = ((rd & 0x80) == (ea & 0x80)
&& (rd & 0x80) != (res & 0x80));
break;
case O_SUB:
case O_SUBX:
case O_CMP:
v = ((rd & 0x80) != (-ea & 0x80)
&& (rd & 0x80) != (res & 0x80));
break;
case O_NEG:
v = (rd == 0x80);
break;
case O_DAA:
case O_DAS:
break; /* No effect on v flag. */
}
goto next;
alu16:
if (store2 (sd, &code->dst, res))
goto end;
just_flags_alu16:
n = res & 0x8000;
nz = res & 0xffff;
c = (res & 0x10000);
switch (code->opcode / 4)
{
case O_ADD:
case O_ADDX:
v = ((rd & 0x8000) == (ea & 0x8000)
&& (rd & 0x8000) != (res & 0x8000));
break;
case O_SUB:
case O_SUBX:
case O_CMP:
v = ((rd & 0x8000) != (-ea & 0x8000)
&& (rd & 0x8000) != (res & 0x8000));
break;
case O_NEG:
v = (rd == 0x8000);
break;
}
goto next;
alu32:
if (store2 (sd, &code->dst, res))
goto end;
just_flags_alu32:
n = res & 0x80000000;
nz = res & 0xffffffff;
switch (code->opcode / 4)
{
case O_ADD:
case O_ADDX:
v = ((rd & 0x80000000) == (ea & 0x80000000)
&& (rd & 0x80000000) != (res & 0x80000000));
c = ((unsigned) res < (unsigned) rd) ||
((unsigned) res < (unsigned) ea);
break;
case O_SUB:
case O_SUBX:
case O_CMP:
v = ((rd & 0x80000000) != (-ea & 0x80000000)
&& (rd & 0x80000000) != (res & 0x80000000));
c = (unsigned) rd < (unsigned) -ea;
break;
case O_NEG:
v = (rd == 0x80000000);
c = res != 0;
break;
}
goto next;
next:
if ((res = h8_get_delayed_branch (sd)) != 0)
{
pc = res;
h8_set_delayed_branch (sd, 0);
}
else
pc = code->next_pc;
} while (0);
end:
h8_set_ticks (sd, h8_get_ticks (sd) + get_now () - tick_start);
h8_set_cycles (sd, h8_get_cycles (sd) + cycles);
h8_set_insts (sd, h8_get_insts (sd) + insts);
h8_set_pc (sd, pc);
BUILDSR (sd);
if (h8300smode)
h8_set_exr (sd, (trace<<7) | intMask);
h8_set_mask (sd, oldmask);
}
void
sim_engine_run (SIM_DESC sd,
int next_cpu_nr, /* ignore */
int nr_cpus, /* ignore */
int siggnal)
{
sim_cpu *cpu;
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
cpu = STATE_CPU (sd, 0);
while (1)
{
step_once (sd, cpu);
if (sim_events_tick (sd))
sim_events_process (sd);
}
}
int
sim_write (SIM_DESC sd, SIM_ADDR addr, const unsigned char *buffer, int size)
{
int i;
init_pointers (sd);
if (addr < 0)
return 0;
for (i = 0; i < size; i++)
{
if (addr < memory_size)
{
h8_set_memory (sd, addr + i, buffer[i]);
}
else
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
break;
}
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
return i;
}
int
sim_read (SIM_DESC sd, SIM_ADDR addr, unsigned char *buffer, int size)
{
init_pointers (sd);
if (addr < 0)
return 0;
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
if (addr + size < memory_size)
memcpy (buffer, h8_get_memory_buf (sd) + addr, size);
else
sim: h8300: drop separate eightbit memory buffer The h8300 sim has its own implementation for memory handling that I'd like to replace with the common sim memory code. However, it's got a weird bit of code it calls "eightbit mem" that makes this not as easy as it would otherwise be. The code has this comment: /* These define the size of main memory for the simulator. Note the size of main memory for the H8/300H is only 256k. Keeping it small makes the simulator run much faster and consume less memory. The linker knows about the limited size of the simulator's main memory on the H8/300H (via the h8300h.sc linker script). So if you change H8300H_MSIZE, be sure to fix the linker script too. Also note that there's a separate "eightbit" area aside from main memory. For simplicity, the simulator assumes any data memory reference outside of main memory refers to the eightbit area (in theory, this can only happen when simulating H8/300H programs). We make no attempt to catch overlapping addresses, wrapped addresses, etc etc. */ I've read the H8/300 Programming Manual and the H8/300H Software Manual and can't find documentation on it. The closest I can find is the bits about the exception vectors, but that sounds like a convention where the first 256 bytes of memory are used for a special purpose. The sim will actually allocate a sep memory buffer of 256 bytes and you address it by accessing anywhere outside of main memory. e.g. I would expect code to access it like: uint32_t *data = (void *)0; data[0] = reset_exception_vector; not like the sim expects like: uint8_t *data = (void *)0x1000000; data[0] = ...; The gcc manual has an "eightbit_data" attribute: Use this attribute on the H8/300, H8/300H, and H8S to indicate that the specified variable should be placed into the eight-bit data section. The compiler generates more efficient code for certain operations on data in the eight-bit data area. Note the eight-bit data area is limited to 256 bytes of data. And the gcc code implies that it's accessed via special addressing: eightbit_data: This variable lives in the 8-bit data area and can be referenced with 8-bit absolute memory addresses. I'm fairly certain these are referring to the 8-bit addressing modes that allow access to 0xff00 - 0xffff with only an 8-bit immediate. They aren't completely separate address spaces which this eightbit memory buffer occupies. But the sim doesn't access its eightbit memory based on specific insns, it does it purely on the addresses requested. Unfortunately, much of this code was authored by Michael Snyder, so I can't ask him :(. I asked Renesas support and they didn't know: https://renesasrulz.com/the_vault/f/archive-forum/6952/question-about-eightbit-memory So I've come to the conclusion that this was a little sim-specific hack done for <some convenience> and has no relation to real hardware. And as such, let's drop it until someone notices and can provide a reason for why we need to support it.
2016-08-18 14:05:03 +08:00
return 0;
return size;
}
static int
h8300_reg_store (SIM_CPU *cpu, int rn, unsigned char *value, int length)
{
int longval;
int shortval;
int intval;
longval = (value[0] << 24) | (value[1] << 16) | (value[2] << 8) | value[3];
shortval = (value[0] << 8) | (value[1]);
intval = h8300hmode ? longval : shortval;
init_pointers (CPU_STATE (cpu));
switch (rn)
{
case PC_REGNUM:
if(h8300_normal_mode)
cpu->pc = shortval; /* PC for Normal mode is 2 bytes */
else
cpu->pc = intval;
break;
default:
return -1;
case R0_REGNUM:
case R1_REGNUM:
case R2_REGNUM:
case R3_REGNUM:
case R4_REGNUM:
case R5_REGNUM:
case R6_REGNUM:
case R7_REGNUM:
case CCR_REGNUM:
2002-05-18 03:19:24 +08:00
case EXR_REGNUM:
case SBR_REGNUM:
case VBR_REGNUM:
case MACH_REGNUM:
case MACL_REGNUM:
cpu->regs[rn] = intval;
break;
case CYCLE_REGNUM:
case INST_REGNUM:
case TICK_REGNUM:
cpu->regs[rn] = longval;
break;
}
return length;
}
static int
h8300_reg_fetch (SIM_CPU *cpu, int rn, unsigned char *buf, int length)
{
int v;
int longreg = 0;
init_pointers (CPU_STATE (cpu));
if (!h8300smode && rn >= EXR_REGNUM)
2002-05-18 19:40:19 +08:00
rn++;
switch (rn)
{
default:
return -1;
case PC_REGNUM:
v = cpu->pc;
break;
case CCR_REGNUM:
2002-05-18 03:19:24 +08:00
case EXR_REGNUM:
case SBR_REGNUM:
case VBR_REGNUM:
case MACH_REGNUM:
case MACL_REGNUM:
case R0_REGNUM:
case R1_REGNUM:
case R2_REGNUM:
case R3_REGNUM:
case R4_REGNUM:
case R5_REGNUM:
case R6_REGNUM:
case R7_REGNUM:
v = cpu->regs[rn];
break;
case CYCLE_REGNUM:
case TICK_REGNUM:
case INST_REGNUM:
v = cpu->regs[rn];
longreg = 1;
break;
case ZERO_REGNUM:
v = 0;
break;
}
/* In Normal mode PC is 2 byte, but other registers are 4 byte */
if ((h8300hmode || longreg) && !(rn == PC_REGNUM && h8300_normal_mode))
{
buf[0] = v >> 24;
buf[1] = v >> 16;
buf[2] = v >> 8;
buf[3] = v >> 0;
return 4;
}
else
{
buf[0] = v >> 8;
buf[1] = v;
return 2;
}
}
void
sim_info (SIM_DESC sd, int verbose)
{
double timetaken = (double) h8_get_ticks (sd) / (double) now_persec ();
double virttime = h8_get_cycles (sd) / 10.0e6;
sim_io_printf (sd, "\n\n#instructions executed %10d\n", h8_get_insts (sd));
sim_io_printf (sd, "#cycles (v approximate) %10d\n", h8_get_cycles (sd));
sim_io_printf (sd, "#real time taken %10.4f\n", timetaken);
sim_io_printf (sd, "#virtual time taken %10.4f\n", virttime);
if (timetaken != 0.0)
sim_io_printf (sd, "#simulation ratio %10.4f\n", virttime / timetaken);
#ifdef ADEBUG
/* This to be conditional on `what' (aka `verbose'),
however it was never passed as non-zero. */
if (1)
{
int i;
for (i = 0; i < O_LAST; i++)
{
if (h8_get_stats (sd, i))
sim_io_printf (sd, "%d: %d\n", i, h8_get_stats (sd, i));
}
}
#endif
}
2001-12-21 00:47:52 +08:00
/* Indicate whether the cpu is an H8/300 or H8/300H.
FLAG is non-zero for the H8/300H. */
void
set_h8300h (unsigned long machine)
{
/* FIXME: Much of the code in sim_load can be moved to sim_open.
This function being replaced by a sim_open:ARGV configuration
2001-12-21 00:47:52 +08:00
option. */
h8300hmode = h8300smode = h8300sxmode = h8300_normal_mode = 0;
if (machine == bfd_mach_h8300sx || machine == bfd_mach_h8300sxn)
h8300sxmode = 1;
if (machine == bfd_mach_h8300s || machine == bfd_mach_h8300sn || h8300sxmode)
h8300smode = 1;
if (machine == bfd_mach_h8300h || machine == bfd_mach_h8300hn || h8300smode)
h8300hmode = 1;
if(machine == bfd_mach_h8300hn || machine == bfd_mach_h8300sn || machine == bfd_mach_h8300sxn)
h8300_normal_mode = 1;
}
/* H8300-specific options.
TODO: These really should be merged into the common model modules. */
typedef enum {
OPTION_H8300H,
OPTION_H8300S,
OPTION_H8300SX
} H8300_OPTIONS;
static SIM_RC
h8300_option_handler (SIM_DESC sd, sim_cpu *cpu ATTRIBUTE_UNUSED, int opt,
char *arg, int is_command ATTRIBUTE_UNUSED)
{
switch ((H8300_OPTIONS) opt)
{
case OPTION_H8300H:
set_h8300h (bfd_mach_h8300h);
break;
case OPTION_H8300S:
set_h8300h (bfd_mach_h8300s);
break;
case OPTION_H8300SX:
set_h8300h (bfd_mach_h8300sx);
break;
default:
/* We'll actually never get here; the caller handles the error
case. */
sim_io_eprintf (sd, "Unknown option `%s'\n", arg);
return SIM_RC_FAIL;
}
return SIM_RC_OK;
}
static const OPTION h8300_options[] =
{
{ {"h8300h", no_argument, NULL, OPTION_H8300H},
'h', NULL, "Indicate the CPU is H8/300H",
h8300_option_handler },
{ {"h8300s", no_argument, NULL, OPTION_H8300S},
'S', NULL, "Indicate the CPU is H8S",
h8300_option_handler },
{ {"h8300sx", no_argument, NULL, OPTION_H8300SX},
'x', NULL, "Indicate the CPU is H8SX",
h8300_option_handler },
{ {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL, NULL }
};
static sim_cia
h8300_pc_get (sim_cpu *cpu)
{
return cpu->pc;
}
static void
h8300_pc_set (sim_cpu *cpu, sim_cia pc)
{
cpu->pc = pc;
}
/* Cover function of sim_state_free to free the cpu buffers as well. */
static void
free_state (SIM_DESC sd)
{
if (STATE_MODULES (sd) != NULL)
sim_module_uninstall (sd);
/* Fixme: free buffers in _sim_cpu. */
sim_state_free (sd);
}
SIM_DESC
sim_open (SIM_OPEN_KIND kind,
struct host_callback_struct *callback,
Index: arm/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * wrapper.c (sim_create_inferior, sim_open): Rename _bfd to bfd. Index: common/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * sim-utils.h (sim_analyze_program, sim_load_file): Rename _bfd to bfd. * sim-hload.c (sim_load), sim-base.h (sim_state_base): Ditto. * nrun.c (main): Ditto. Index: d10v/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: erc32/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interf.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: h8300/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * compile.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: h8500/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * compile.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: i960/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * sim-if.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: m32r/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * sim-if.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: m68hc11/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interp.c (sim_prepare_for_program, sim_open) (sim_create_inferior): Rename _bfd to bfd. Index: mcore/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: mips/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interp.c (sim_open): (sim_create_inferior): Index: mn10200/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: mn10300/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interp.c (sim_open, sim_create_inferior, sim_open) (sim_create_inferior): Rename _bfd to bfd. Index: ppc/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * sim_calls.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: sh/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interp.c (init_dsp, sim_open, sim_create_inferior): Rename _bfd to bfd. Index: v850/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd. Index: z8k/ChangeLog 2003-02-27 Andrew Cagney <cagney@redhat.com> * iface.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
2003-02-28 07:26:34 +08:00
struct bfd *abfd,
char * const *argv)
{
int i;
SIM_DESC sd;
sim_cpu *cpu;
sd = sim_state_alloc (kind, callback);
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1, /*cgen_cpu_max_extra_bytes ()*/0) != SIM_RC_OK)
{
free_state (sd);
return 0;
}
cpu = STATE_CPU (sd, 0);
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
cpu->regs[SBR_REGNUM] = 0xFFFFFF00;
/* sim_cpu object is new, so some initialization is needed. */
init_pointers_needed = 1;
if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
{
free_state (sd);
return 0;
}
if (sim_add_option_table (sd, NULL, h8300_options) != SIM_RC_OK)
{
free_state (sd);
return 0;
}
/* The parser will print an error message for us, so we silently return. */
if (sim_parse_args (sd, argv) != SIM_RC_OK)
{
/* Uninstall the modules to avoid memory leaks,
file descriptor leaks, etc. */
free_state (sd);
return 0;
}
/* Check for/establish the a reference program image. */
if (sim_analyze_program (sd,
(STATE_PROG_ARGV (sd) != NULL
? *STATE_PROG_ARGV (sd)
: NULL), abfd) != SIM_RC_OK)
{
free_state (sd);
return 0;
}
/* Establish any remaining configuration options. */
if (sim_config (sd) != SIM_RC_OK)
{
free_state (sd);
return 0;
}
if (sim_post_argv_init (sd) != SIM_RC_OK)
{
/* Uninstall the modules to avoid memory leaks,
file descriptor leaks, etc. */
free_state (sd);
return 0;
}
/* CPU specific initialization. */
for (i = 0; i < MAX_NR_PROCESSORS; ++i)
{
SIM_CPU *cpu = STATE_CPU (sd, i);
CPU_REG_FETCH (cpu) = h8300_reg_fetch;
CPU_REG_STORE (cpu) = h8300_reg_store;
CPU_PC_FETCH (cpu) = h8300_pc_get;
CPU_PC_STORE (cpu) = h8300_pc_set;
}
/* sim_hw_configure (sd); */
2001-12-21 00:47:52 +08:00
/* FIXME: Much of the code in sim_load can be moved here. */
return sd;
}
/* Called by gdb to load a program into memory. */
SIM_RC
sim_load (SIM_DESC sd, const char *prog, bfd *abfd, int from_tty)
{
bfd *prog_bfd;
2001-12-21 00:47:52 +08:00
/* FIXME: The code below that sets a specific variant of the H8/300
being simulated should be moved to sim_open(). */
2001-12-21 00:47:52 +08:00
/* See if the file is for the H8/300 or H8/300H. */
/* ??? This may not be the most efficient way. The z8k simulator
does this via a different mechanism (INIT_EXTRA_SYMTAB_INFO). */
if (abfd != NULL)
prog_bfd = abfd;
else
prog_bfd = bfd_openr (prog, NULL);
if (prog_bfd != NULL)
{
/* Set the cpu type. We ignore failure from bfd_check_format
and bfd_openr as sim_load_file checks too. */
2001-12-21 01:36:23 +08:00
if (bfd_check_format (prog_bfd, bfd_object))
{
set_h8300h (bfd_get_mach (prog_bfd));
}
}
/* If we're using gdb attached to the simulator, then we have to
reallocate memory for the simulator.
When gdb first starts, it calls fetch_registers (among other
functions), which in turn calls init_pointers, which allocates
simulator memory.
The problem is when we do that, we don't know whether we're
2001-12-21 00:47:52 +08:00
debugging an H8/300 or H8/300H program.
This is the first point at which we can make that determination,
so we just reallocate memory now; this will also allow us to handle
2001-12-21 00:47:52 +08:00
switching between H8/300 and H8/300H programs without exiting
gdb. */
if (h8300smode && !h8300_normal_mode)
memory_size = H8300S_MSIZE;
else if (h8300hmode && !h8300_normal_mode)
memory_size = H8300H_MSIZE;
else
memory_size = H8300_MSIZE;
if (h8_get_memory_buf (sd))
free (h8_get_memory_buf (sd));
h8_set_memory_buf (sd, (unsigned char *)
calloc (sizeof (char), memory_size));
sd->memory_size = memory_size;
2001-12-21 00:47:52 +08:00
/* `msize' must be a power of two. */
if ((memory_size & (memory_size - 1)) != 0)
{
sim_io_printf (sd, "sim_load: bad memory size.\n");
return SIM_RC_FAIL;
}
h8_set_mask (sd, memory_size - 1);
if (sim_load_file (sd, STATE_MY_NAME (sd), STATE_CALLBACK (sd), prog,
prog_bfd, STATE_OPEN_KIND (sd) == SIM_OPEN_DEBUG,
0, sim_write)
== NULL)
{
/* Close the bfd if we opened it. */
if (abfd == NULL && prog_bfd != NULL)
bfd_close (prog_bfd);
return SIM_RC_FAIL;
}
/* Close the bfd if we opened it. */
if (abfd == NULL && prog_bfd != NULL)
bfd_close (prog_bfd);
return SIM_RC_OK;
}
SIM_RC
sim_create_inferior (SIM_DESC sd, struct bfd *abfd,
char * const *argv, char * const *env)
{
int i = 0;
int len_arg = 0;
int no_of_args = 0;
if (abfd != NULL)
h8_set_pc (sd, bfd_get_start_address (abfd));
else
h8_set_pc (sd, 0);
/* Command Line support. */
if (argv != NULL)
{
/* Counting the no. of commandline arguments. */
for (no_of_args = 0; argv[no_of_args] != NULL; no_of_args++)
continue;
/* Allocating memory for the argv pointers. */
h8_set_command_line (sd, (char **) malloc ((sizeof (char *))
* (no_of_args + 1)));
for (i = 0; i < no_of_args; i++)
{
/* Copying the argument string. */
h8_set_cmdline_arg (sd, i, (char *) strdup (argv[i]));
}
h8_set_cmdline_arg (sd, i, NULL);
}
return SIM_RC_OK;
}