binutils-gdb/gdbsupport/safe-iterator.h

140 lines
3.6 KiB
C
Raw Normal View History

Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
/* A safe iterator for GDB, the GNU debugger.
Copyright (C) 2018-2023 Free Software Foundation, Inc.
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
Normalize include guards in gdb While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard.
2019-01-28 03:51:36 +08:00
#ifndef COMMON_SAFE_ITERATOR_H
#define COMMON_SAFE_ITERATOR_H
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
gdbsupport: make basic_safe_iterator::operator* return the same thing as underlying iterator Using the following patch that removes the reference_to_pointer_iterator from breakpoint_range, I would get: CXX breakpoint.o /home/smarchi/src/binutils-gdb/gdb/breakpoint.c: In function ‘void breakpoint_program_space_exit(program_space*)’: /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:3030:46: error: cannot allocate an object of abstract type ‘breakpoint’ 3030 | for (breakpoint &b : all_breakpoints_safe ()) | ^ In file included from /home/smarchi/src/binutils-gdb/gdb/gdbthread.h:26, from /home/smarchi/src/binutils-gdb/gdb/infrun.h:21, from /home/smarchi/src/binutils-gdb/gdb/gdbarch.h:28, from /home/smarchi/src/binutils-gdb/gdb/arch-utils.h:23, from /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:21: /home/smarchi/src/binutils-gdb/gdb/breakpoint.h:619:8: note: because the following virtual functions are pure within ‘breakpoint’: 619 | struct breakpoint : public intrusive_list_node<breakpoint> | ^~~~~~~~~~ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:250:1: note: ‘virtual breakpoint::~breakpoint()’ 250 | breakpoint::~breakpoint () | ^~~~~~~~~~ This is because the operator* method of the basic_safe_iterator iterator wrapper returns a value_type. So, even if the method of the underlying iterator (breakpoint_iterator, an intrusive_list iterator) returns a `breakpoint &`, the method of the wrapper returns a `breakpoint`. I think it would make sense for iterator wrappers such as basic_safe_iterator to return the exact same thing as the iterator they wrap. At least, it fixes my problem. Change-Id: Ibbcd390ac03d2fb6ae4854923750c8d7c3c04e8a Reviewed-By: Andrew Burgess <aburgess@redhat.com>
2023-05-09 02:49:33 +08:00
#include "gdbsupport/invoke-result.h"
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
/* A forward iterator that wraps Iterator, such that when iterating
with iterator IT, it is possible to delete *IT without invalidating
IT. Suitably wrapped in a range type and used with range-for, this
allow convenient patterns like this:
// range_safe() returns a range type whose begin()/end() methods
// return safe iterators.
for (foo *f : range_safe ())
{
if (f->should_delete ())
{
// The ++it operation implicitly done by the range-for is
// still OK after this.
delete f;
}
}
*/
template<typename Iterator>
class basic_safe_iterator
{
public:
typedef basic_safe_iterator self_type;
typedef typename Iterator::value_type value_type;
typedef typename Iterator::reference reference;
typedef typename Iterator::pointer pointer;
typedef typename Iterator::iterator_category iterator_category;
typedef typename Iterator::difference_type difference_type;
gdb: make all_inferiors_safe actually work The test gdb.threads/fork-plus-threads.exp fails since 08bdefb58b78 ("gdb: make inferior_list use intrusive_list"): FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left Looking at the log, we see that we are left with a bunch of inferiors in the detach-on-fork=off case: info inferiors^M Num Description Connection Executable ^M * 1 <null> <snip>/fork-plus-threads ^M 2 <null> <snip>/fork-plus-threads ^M 3 <null> <snip>/fork-plus-threads ^M 4 <null> <snip>/fork-plus-threads ^M 5 <null> <snip>/fork-plus-threads ^M 6 <null> <snip>/fork-plus-threads ^M 7 <null> <snip>/fork-plus-threads ^M 8 <null> <snip>/fork-plus-threads ^M 9 <null> <snip>/fork-plus-threads ^M 10 <null> <snip>/fork-plus-threads ^M 11 <null> <snip>/fork-plus-threads ^M (gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left when we expect to have just one. The problem is prune_inferiors not pruning inferiors. And this is caused by all_inferiors_safe not actually iterating on inferiors. The current implementation: inline all_inferiors_safe_range all_inferiors_safe () { return {}; } default-constructs an all_inferiors_safe_range, which default-constructs an all_inferiors_safe_iterator as its m_begin field, which default-constructs a all_inferiors_iterator. A default-constructed all_inferiors_iterator is an end iterator, which means we have constructed an (end,end) all_inferiors_safe_range. We actually need to pass down the list on which we want to iterator (that is the inferior_list global), so that all_inferiors_iterator's first constructor is chosen. We also pass nullptr as the proc_target filter. In this case, we don't do any filtering, but if in the future all_inferiors_safe needed to allow filtering on process target (like all_inferiors does), we could pass down a process target pointer. basic_safe_iterator's constructor needs to be changed to allow constructing the wrapped iterator with multiple arguments, not just one. With this, gdb.threads/fork-plus-threads.exp is passing once again for me. Change-Id: I650552ede596e3590c4b7606ce403690a0278a01
2021-07-15 00:31:36 +08:00
/* Construct the begin iterator using the given arguments; the end iterator is
default constructed. */
template<typename... Args>
explicit basic_safe_iterator (Args &&...args)
: m_it (std::forward<Args> (args)...),
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
m_next (m_it)
{
if (m_it != m_end)
++m_next;
}
/* Construct the iterator using the first argument, and construct
the end iterator using the second argument. */
template<typename Arg>
explicit basic_safe_iterator (Arg &&arg, Arg &&arg2)
: m_it (std::forward<Arg> (arg)),
m_next (m_it),
m_end (std::forward<Arg> (arg2))
{
if (m_it != m_end)
++m_next;
}
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
/* Create a one-past-end iterator. */
basic_safe_iterator ()
{}
gdbsupport: make basic_safe_iterator::operator* return the same thing as underlying iterator Using the following patch that removes the reference_to_pointer_iterator from breakpoint_range, I would get: CXX breakpoint.o /home/smarchi/src/binutils-gdb/gdb/breakpoint.c: In function ‘void breakpoint_program_space_exit(program_space*)’: /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:3030:46: error: cannot allocate an object of abstract type ‘breakpoint’ 3030 | for (breakpoint &b : all_breakpoints_safe ()) | ^ In file included from /home/smarchi/src/binutils-gdb/gdb/gdbthread.h:26, from /home/smarchi/src/binutils-gdb/gdb/infrun.h:21, from /home/smarchi/src/binutils-gdb/gdb/gdbarch.h:28, from /home/smarchi/src/binutils-gdb/gdb/arch-utils.h:23, from /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:21: /home/smarchi/src/binutils-gdb/gdb/breakpoint.h:619:8: note: because the following virtual functions are pure within ‘breakpoint’: 619 | struct breakpoint : public intrusive_list_node<breakpoint> | ^~~~~~~~~~ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:250:1: note: ‘virtual breakpoint::~breakpoint()’ 250 | breakpoint::~breakpoint () | ^~~~~~~~~~ This is because the operator* method of the basic_safe_iterator iterator wrapper returns a value_type. So, even if the method of the underlying iterator (breakpoint_iterator, an intrusive_list iterator) returns a `breakpoint &`, the method of the wrapper returns a `breakpoint`. I think it would make sense for iterator wrappers such as basic_safe_iterator to return the exact same thing as the iterator they wrap. At least, it fixes my problem. Change-Id: Ibbcd390ac03d2fb6ae4854923750c8d7c3c04e8a Reviewed-By: Andrew Burgess <aburgess@redhat.com>
2023-05-09 02:49:33 +08:00
typename gdb::invoke_result<decltype(&Iterator::operator*), Iterator>::type
operator* () const
{ return *m_it; }
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
self_type &operator++ ()
{
m_it = m_next;
if (m_it != m_end)
++m_next;
return *this;
}
bool operator== (const self_type &other) const
{ return m_it == other.m_it; }
bool operator!= (const self_type &other) const
{ return m_it != other.m_it; }
private:
/* The current element. */
Iterator m_it {};
/* The next element. Always one element ahead of M_IT. */
Iterator m_next {};
/* A one-past-end iterator. */
Iterator m_end {};
};
/* A range adapter that wraps another range, and then returns safe
iterators wrapping the original range's iterators. */
template<typename Range>
class basic_safe_range
{
public:
typedef basic_safe_iterator<typename Range::iterator> iterator;
explicit basic_safe_range (Range range)
: m_range (range)
{
}
iterator begin ()
{
return iterator (m_range.begin (), m_range.end ());
}
iterator end ()
{
return iterator (m_range.end (), m_range.end ());
}
private:
Range m_range;
};
Normalize include guards in gdb While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard.
2019-01-28 03:51:36 +08:00
#endif /* COMMON_SAFE_ITERATOR_H */