s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
/* Target-dependent code for s390.
|
|
|
|
|
2023-01-01 20:49:04 +08:00
|
|
|
Copyright (C) 2003-2023 Free Software Foundation, Inc.
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
|
|
#ifndef S390_TDEP_H
|
|
|
|
#define S390_TDEP_H
|
|
|
|
|
|
|
|
#include "prologue-value.h"
|
2021-11-18 01:13:47 +08:00
|
|
|
#include "gdbarch.h"
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
|
|
|
|
enum s390_abi_kind
|
|
|
|
{
|
|
|
|
ABI_NONE,
|
|
|
|
ABI_LINUX_S390,
|
|
|
|
ABI_LINUX_ZSERIES
|
|
|
|
};
|
|
|
|
|
|
|
|
enum s390_vector_abi_kind
|
|
|
|
{
|
|
|
|
S390_VECTOR_ABI_NONE,
|
|
|
|
S390_VECTOR_ABI_128
|
|
|
|
};
|
|
|
|
|
|
|
|
/* The tdep structure. */
|
|
|
|
|
2022-07-25 19:07:11 +08:00
|
|
|
struct s390_gdbarch_tdep : gdbarch_tdep_base
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
{
|
|
|
|
/* Target description. */
|
gdb: fix gdbarch_tdep ODR violation
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
2021-11-16 00:29:39 +08:00
|
|
|
const struct target_desc *tdesc = nullptr;
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
|
|
|
|
/* ABI version. */
|
gdb: fix gdbarch_tdep ODR violation
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
2021-11-16 00:29:39 +08:00
|
|
|
enum s390_abi_kind abi {};
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
|
|
|
|
/* Vector ABI. */
|
gdb: fix gdbarch_tdep ODR violation
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
2021-11-16 00:29:39 +08:00
|
|
|
enum s390_vector_abi_kind vector_abi {};
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
|
|
|
|
/* Pseudo register numbers. */
|
gdb: fix gdbarch_tdep ODR violation
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
2021-11-16 00:29:39 +08:00
|
|
|
int gpr_full_regnum = 0;
|
|
|
|
int pc_regnum = 0;
|
|
|
|
int cc_regnum = 0;
|
|
|
|
int v0_full_regnum = 0;
|
|
|
|
|
|
|
|
bool have_upper = 0;
|
|
|
|
bool have_linux_v1 = 0;
|
|
|
|
bool have_linux_v2 = 0;
|
|
|
|
bool have_tdb = 0;
|
|
|
|
bool have_vx = 0;
|
|
|
|
bool have_gs = 0;
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
|
|
|
|
/* Hook to record OS specific systemcall. */
|
gdb: fix gdbarch_tdep ODR violation
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
2021-11-16 00:29:39 +08:00
|
|
|
int (*s390_syscall_record) (struct regcache *regcache, LONGEST svc_number)
|
|
|
|
= nullptr;
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
};
|
|
|
|
|
gdb: make gdbarch_alloc take ownership of the tdep
It's currently not clear how the ownership of gdbarch_tdep objects
works. In fact, nothing ever takes ownership of it. This is mostly
fine because we never free gdbarch objects, and thus we never free
gdbarch_tdep objects. There is an exception to that however: when
initialization fails, we do free the gdbarch object that is not going to
be used, and we free the tdep too. Currently, i386 and s390 do it.
To make things clearer, change gdbarch_alloc so that it takes ownership
of the tdep. The tdep is thus automatically freed if the gdbarch is
freed.
Change all gdbarch initialization functions to pass a new gdbarch_tdep
object to gdbarch_alloc and then retrieve a non-owning reference from
the gdbarch object.
Before this patch, the xtensa architecture had a single global instance
of xtensa_gdbarch_tdep. Since we need to pass a dynamically allocated
gdbarch_tdep_base instance to gdbarch_alloc, remove this global
instance, and dynamically allocate one as needed, like we do for all
other architectures. Make the `rmap` array externally visible and
rename it to the less collision-prone `xtensa_rmap` name.
Change-Id: Id3d70493ef80ce4bdff701c57636f4c79ed8aea2
Approved-By: Andrew Burgess <aburgess@redhat.com>
2022-10-03 23:15:14 +08:00
|
|
|
using s390_gdbarch_tdep_up = std::unique_ptr<s390_gdbarch_tdep>;
|
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
/* Decoding S/390 instructions. */
|
|
|
|
|
|
|
|
/* Named opcode values for the S/390 instructions we recognize. Some
|
|
|
|
instructions have their opcode split across two fields; those are the
|
|
|
|
op1_* and op2_* enums. */
|
|
|
|
|
|
|
|
enum
|
|
|
|
{
|
|
|
|
op1_lhi = 0xa7, op2_lhi = 0x08,
|
|
|
|
op1_lghi = 0xa7, op2_lghi = 0x09,
|
|
|
|
op1_lgfi = 0xc0, op2_lgfi = 0x01,
|
|
|
|
op_lr = 0x18,
|
|
|
|
op_lgr = 0xb904,
|
|
|
|
op_l = 0x58,
|
|
|
|
op1_ly = 0xe3, op2_ly = 0x58,
|
|
|
|
op1_lg = 0xe3, op2_lg = 0x04,
|
|
|
|
op_lm = 0x98,
|
|
|
|
op1_lmy = 0xeb, op2_lmy = 0x98,
|
|
|
|
op1_lmg = 0xeb, op2_lmg = 0x04,
|
|
|
|
op_st = 0x50,
|
|
|
|
op1_sty = 0xe3, op2_sty = 0x50,
|
|
|
|
op1_stg = 0xe3, op2_stg = 0x24,
|
|
|
|
op_std = 0x60,
|
|
|
|
op_stm = 0x90,
|
|
|
|
op1_stmy = 0xeb, op2_stmy = 0x90,
|
|
|
|
op1_stmg = 0xeb, op2_stmg = 0x24,
|
|
|
|
op1_aghi = 0xa7, op2_aghi = 0x0b,
|
|
|
|
op1_ahi = 0xa7, op2_ahi = 0x0a,
|
|
|
|
op1_agfi = 0xc2, op2_agfi = 0x08,
|
|
|
|
op1_afi = 0xc2, op2_afi = 0x09,
|
|
|
|
op1_algfi= 0xc2, op2_algfi= 0x0a,
|
|
|
|
op1_alfi = 0xc2, op2_alfi = 0x0b,
|
|
|
|
op_ar = 0x1a,
|
|
|
|
op_agr = 0xb908,
|
|
|
|
op_a = 0x5a,
|
|
|
|
op1_ay = 0xe3, op2_ay = 0x5a,
|
|
|
|
op1_ag = 0xe3, op2_ag = 0x08,
|
|
|
|
op1_slgfi= 0xc2, op2_slgfi= 0x04,
|
|
|
|
op1_slfi = 0xc2, op2_slfi = 0x05,
|
|
|
|
op_sr = 0x1b,
|
|
|
|
op_sgr = 0xb909,
|
|
|
|
op_s = 0x5b,
|
|
|
|
op1_sy = 0xe3, op2_sy = 0x5b,
|
|
|
|
op1_sg = 0xe3, op2_sg = 0x09,
|
|
|
|
op_nr = 0x14,
|
|
|
|
op_ngr = 0xb980,
|
|
|
|
op_la = 0x41,
|
|
|
|
op1_lay = 0xe3, op2_lay = 0x71,
|
|
|
|
op1_larl = 0xc0, op2_larl = 0x00,
|
|
|
|
op_basr = 0x0d,
|
|
|
|
op_bas = 0x4d,
|
|
|
|
op_bcr = 0x07,
|
2020-12-06 18:27:52 +08:00
|
|
|
op_bc = 0x47,
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
op_bctr = 0x06,
|
|
|
|
op_bctgr = 0xb946,
|
|
|
|
op_bct = 0x46,
|
|
|
|
op1_bctg = 0xe3, op2_bctg = 0x46,
|
|
|
|
op_bxh = 0x86,
|
|
|
|
op1_bxhg = 0xeb, op2_bxhg = 0x44,
|
|
|
|
op_bxle = 0x87,
|
|
|
|
op1_bxleg= 0xeb, op2_bxleg= 0x45,
|
|
|
|
op1_bras = 0xa7, op2_bras = 0x05,
|
|
|
|
op1_brasl= 0xc0, op2_brasl= 0x05,
|
|
|
|
op1_brc = 0xa7, op2_brc = 0x04,
|
|
|
|
op1_brcl = 0xc0, op2_brcl = 0x04,
|
|
|
|
op1_brct = 0xa7, op2_brct = 0x06,
|
|
|
|
op1_brctg= 0xa7, op2_brctg= 0x07,
|
|
|
|
op_brxh = 0x84,
|
|
|
|
op1_brxhg= 0xec, op2_brxhg= 0x44,
|
|
|
|
op_brxle = 0x85,
|
|
|
|
op1_brxlg= 0xec, op2_brxlg= 0x45,
|
|
|
|
op_svc = 0x0a,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Hardware capabilities. */
|
|
|
|
|
|
|
|
#ifndef HWCAP_S390_HIGH_GPRS
|
|
|
|
#define HWCAP_S390_HIGH_GPRS 512
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef HWCAP_S390_TE
|
|
|
|
#define HWCAP_S390_TE 1024
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef HWCAP_S390_VX
|
|
|
|
#define HWCAP_S390_VX 2048
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef HWCAP_S390_GS
|
|
|
|
#define HWCAP_S390_GS 16384
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Register information. */
|
|
|
|
|
|
|
|
/* Program Status Word. */
|
|
|
|
#define S390_PSWM_REGNUM 0
|
|
|
|
#define S390_PSWA_REGNUM 1
|
|
|
|
/* General Purpose Registers. */
|
|
|
|
#define S390_R0_REGNUM 2
|
|
|
|
#define S390_R1_REGNUM 3
|
|
|
|
#define S390_R2_REGNUM 4
|
|
|
|
#define S390_R3_REGNUM 5
|
|
|
|
#define S390_R4_REGNUM 6
|
|
|
|
#define S390_R5_REGNUM 7
|
|
|
|
#define S390_R6_REGNUM 8
|
|
|
|
#define S390_R7_REGNUM 9
|
|
|
|
#define S390_R8_REGNUM 10
|
|
|
|
#define S390_R9_REGNUM 11
|
|
|
|
#define S390_R10_REGNUM 12
|
|
|
|
#define S390_R11_REGNUM 13
|
|
|
|
#define S390_R12_REGNUM 14
|
|
|
|
#define S390_R13_REGNUM 15
|
|
|
|
#define S390_R14_REGNUM 16
|
|
|
|
#define S390_R15_REGNUM 17
|
|
|
|
/* Access Registers. */
|
|
|
|
#define S390_A0_REGNUM 18
|
|
|
|
#define S390_A1_REGNUM 19
|
|
|
|
#define S390_A2_REGNUM 20
|
|
|
|
#define S390_A3_REGNUM 21
|
|
|
|
#define S390_A4_REGNUM 22
|
|
|
|
#define S390_A5_REGNUM 23
|
|
|
|
#define S390_A6_REGNUM 24
|
|
|
|
#define S390_A7_REGNUM 25
|
|
|
|
#define S390_A8_REGNUM 26
|
|
|
|
#define S390_A9_REGNUM 27
|
|
|
|
#define S390_A10_REGNUM 28
|
|
|
|
#define S390_A11_REGNUM 29
|
|
|
|
#define S390_A12_REGNUM 30
|
|
|
|
#define S390_A13_REGNUM 31
|
|
|
|
#define S390_A14_REGNUM 32
|
|
|
|
#define S390_A15_REGNUM 33
|
|
|
|
/* Floating Point Control Word. */
|
|
|
|
#define S390_FPC_REGNUM 34
|
|
|
|
/* Floating Point Registers. */
|
|
|
|
#define S390_F0_REGNUM 35
|
|
|
|
#define S390_F1_REGNUM 36
|
|
|
|
#define S390_F2_REGNUM 37
|
|
|
|
#define S390_F3_REGNUM 38
|
|
|
|
#define S390_F4_REGNUM 39
|
|
|
|
#define S390_F5_REGNUM 40
|
|
|
|
#define S390_F6_REGNUM 41
|
|
|
|
#define S390_F7_REGNUM 42
|
|
|
|
#define S390_F8_REGNUM 43
|
|
|
|
#define S390_F9_REGNUM 44
|
|
|
|
#define S390_F10_REGNUM 45
|
|
|
|
#define S390_F11_REGNUM 46
|
|
|
|
#define S390_F12_REGNUM 47
|
|
|
|
#define S390_F13_REGNUM 48
|
|
|
|
#define S390_F14_REGNUM 49
|
|
|
|
#define S390_F15_REGNUM 50
|
|
|
|
/* General Purpose Register Upper Halves. */
|
|
|
|
#define S390_R0_UPPER_REGNUM 51
|
|
|
|
#define S390_R1_UPPER_REGNUM 52
|
|
|
|
#define S390_R2_UPPER_REGNUM 53
|
|
|
|
#define S390_R3_UPPER_REGNUM 54
|
|
|
|
#define S390_R4_UPPER_REGNUM 55
|
|
|
|
#define S390_R5_UPPER_REGNUM 56
|
|
|
|
#define S390_R6_UPPER_REGNUM 57
|
|
|
|
#define S390_R7_UPPER_REGNUM 58
|
|
|
|
#define S390_R8_UPPER_REGNUM 59
|
|
|
|
#define S390_R9_UPPER_REGNUM 60
|
|
|
|
#define S390_R10_UPPER_REGNUM 61
|
|
|
|
#define S390_R11_UPPER_REGNUM 62
|
|
|
|
#define S390_R12_UPPER_REGNUM 63
|
|
|
|
#define S390_R13_UPPER_REGNUM 64
|
|
|
|
#define S390_R14_UPPER_REGNUM 65
|
|
|
|
#define S390_R15_UPPER_REGNUM 66
|
|
|
|
/* GNU/Linux-specific optional registers. */
|
|
|
|
#define S390_ORIG_R2_REGNUM 67
|
|
|
|
#define S390_LAST_BREAK_REGNUM 68
|
|
|
|
#define S390_SYSTEM_CALL_REGNUM 69
|
|
|
|
/* Transaction diagnostic block. */
|
|
|
|
#define S390_TDB_DWORD0_REGNUM 70
|
|
|
|
#define S390_TDB_ABORT_CODE_REGNUM 71
|
|
|
|
#define S390_TDB_CONFLICT_TOKEN_REGNUM 72
|
|
|
|
#define S390_TDB_ATIA_REGNUM 73
|
|
|
|
#define S390_TDB_R0_REGNUM 74
|
|
|
|
#define S390_TDB_R1_REGNUM 75
|
|
|
|
#define S390_TDB_R2_REGNUM 76
|
|
|
|
#define S390_TDB_R3_REGNUM 77
|
|
|
|
#define S390_TDB_R4_REGNUM 78
|
|
|
|
#define S390_TDB_R5_REGNUM 79
|
|
|
|
#define S390_TDB_R6_REGNUM 80
|
|
|
|
#define S390_TDB_R7_REGNUM 81
|
|
|
|
#define S390_TDB_R8_REGNUM 82
|
|
|
|
#define S390_TDB_R9_REGNUM 83
|
|
|
|
#define S390_TDB_R10_REGNUM 84
|
|
|
|
#define S390_TDB_R11_REGNUM 85
|
|
|
|
#define S390_TDB_R12_REGNUM 86
|
|
|
|
#define S390_TDB_R13_REGNUM 87
|
|
|
|
#define S390_TDB_R14_REGNUM 88
|
|
|
|
#define S390_TDB_R15_REGNUM 89
|
|
|
|
/* Vector registers. */
|
|
|
|
#define S390_V0_LOWER_REGNUM 90
|
|
|
|
#define S390_V1_LOWER_REGNUM 91
|
|
|
|
#define S390_V2_LOWER_REGNUM 92
|
|
|
|
#define S390_V3_LOWER_REGNUM 93
|
|
|
|
#define S390_V4_LOWER_REGNUM 94
|
|
|
|
#define S390_V5_LOWER_REGNUM 95
|
|
|
|
#define S390_V6_LOWER_REGNUM 96
|
|
|
|
#define S390_V7_LOWER_REGNUM 97
|
|
|
|
#define S390_V8_LOWER_REGNUM 98
|
|
|
|
#define S390_V9_LOWER_REGNUM 99
|
|
|
|
#define S390_V10_LOWER_REGNUM 100
|
|
|
|
#define S390_V11_LOWER_REGNUM 101
|
|
|
|
#define S390_V12_LOWER_REGNUM 102
|
|
|
|
#define S390_V13_LOWER_REGNUM 103
|
|
|
|
#define S390_V14_LOWER_REGNUM 104
|
|
|
|
#define S390_V15_LOWER_REGNUM 105
|
|
|
|
#define S390_V16_REGNUM 106
|
|
|
|
#define S390_V17_REGNUM 107
|
|
|
|
#define S390_V18_REGNUM 108
|
|
|
|
#define S390_V19_REGNUM 109
|
|
|
|
#define S390_V20_REGNUM 110
|
|
|
|
#define S390_V21_REGNUM 111
|
|
|
|
#define S390_V22_REGNUM 112
|
|
|
|
#define S390_V23_REGNUM 113
|
|
|
|
#define S390_V24_REGNUM 114
|
|
|
|
#define S390_V25_REGNUM 115
|
|
|
|
#define S390_V26_REGNUM 116
|
|
|
|
#define S390_V27_REGNUM 117
|
|
|
|
#define S390_V28_REGNUM 118
|
|
|
|
#define S390_V29_REGNUM 119
|
|
|
|
#define S390_V30_REGNUM 120
|
|
|
|
#define S390_V31_REGNUM 121
|
|
|
|
#define S390_GSD_REGNUM 122
|
|
|
|
#define S390_GSSM_REGNUM 123
|
|
|
|
#define S390_GSEPLA_REGNUM 124
|
|
|
|
#define S390_BC_GSD_REGNUM 125
|
|
|
|
#define S390_BC_GSSM_REGNUM 126
|
|
|
|
#define S390_BC_GSEPLA_REGNUM 127
|
|
|
|
/* Total. */
|
|
|
|
#define S390_NUM_REGS 128
|
|
|
|
|
|
|
|
#define S390_NUM_GPRS 16
|
|
|
|
#define S390_NUM_FPRS 16
|
|
|
|
|
|
|
|
#define S390_MAX_INSTR_SIZE 6
|
|
|
|
|
|
|
|
/* Special register usage. */
|
|
|
|
#define S390_SP_REGNUM S390_R15_REGNUM
|
|
|
|
#define S390_RETADDR_REGNUM S390_R14_REGNUM
|
|
|
|
#define S390_FRAME_REGNUM S390_R11_REGNUM
|
|
|
|
|
|
|
|
/* Frame unwinding. */
|
|
|
|
|
|
|
|
extern struct value *s390_trad_frame_prev_register
|
2022-07-26 01:06:35 +08:00
|
|
|
(frame_info_ptr this_frame, struct trad_frame_saved_reg saved_regs[],
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
int regnum);
|
|
|
|
|
Constify target_desc declarations
This patch changes various global target_desc declarations to const, thereby
correcting a prominent source of ODR violations in PowerPC-related target code.
The majority of files/changes are mechanical const-ifications accomplished by
regenerating the C files in features/.
This also required manually updating mips-linux-tdep.h, s390-linux-tdep.h,
nios2-tdep.h, s390-tdep.h, arch/ppc-linux-tdesc.h, arch/ppc-linux-common.c,
and rs6000-tdep.c.
Patch tested against the sourceware trybot, and fully regression tested against
our (Red Hat's) internal test infrastructure on Rawhide aarch64, s390x, x86_64,
and powerpcle.
With this patch, I can finally enable LTO in our GDB package builds. [Tested
with a rawhide scratch build containing this patch.]
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24835
2022-09-09 23:44:50 +08:00
|
|
|
extern const struct target_desc *tdesc_s390_linux32;
|
|
|
|
extern const struct target_desc *tdesc_s390x_linux64;
|
2018-01-31 00:10:08 +08:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 20:37:43 +08:00
|
|
|
#endif /* S390_TDEP_H */
|