binutils-gdb/gdb/trad-frame.c

282 lines
7.9 KiB
C
Raw Normal View History

/* Traditional frame unwind support, for GDB the GNU Debugger.
Copyright (C) 2003-2019 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "frame.h"
#include "trad-frame.h"
#include "regcache.h"
#include "frame-unwind.h"
Add a helper function to trad_frame to support register cache maps. Currently, signal frame handlers require explicitly coded calls to trad_frame_set_reg_addr() to describe the location of saved registers within a signal frame. This change permits the regcache_map_entry arrays used with regcache::supply_regset and regcache::collect_regset to be used to describe a block of saved registers given an initial address for the register block. Some systems use the same layout for registers in core dump notes, native register sets with ptrace(), and the register contexts saved in signal frames. On these systems, a single register map can now be used to describe the layout of registers in all three places. If a register map entry's size does not match the native size of a register, try to match the semantics used by regcache::transfer_regset. If a register slot is too large, assume that the register's value is stored in the first N bytes and ignore the remaning bytes. If the register slot is smaller than the register, assume the slot holds the low N bytes of the register's value. Read these low N bytes from the target and zero-extend them to generate a register value. While here, document the semantics for both regcache::transfer_regset and trad_frame with respect to register slot's whose size does not match the register's size. gdb/ChangeLog: * regcache.h (struct regcache_map_entry): Note that this type can be used with traditional frame caches. * trad-frame.c (trad_frame_set_reg_regmap): New. * trad-frame.h (trad_frame_set_reg_regmap): New.
2018-10-09 05:47:33 +08:00
#include "target.h"
#include "value.h"
Don't include gdbarch.h from defs.h I touched symtab.h and was surprised to see how many files were rebuilt. I looked into it a bit, and found that defs.h includes gdbarch.h, which in turn includes many things. gdbarch.h is only needed by a minority ofthe files in gdb, so this patch removes the include from defs.h and updates the fallout. I did "wc -l" on the files in build/gdb/.deps; this patch reduces the line count from 139935 to 137030; so there are definitely future build-time savings here. Note that while I configured with --enable-targets=all, it's possible that some *-nat.c file needs an update. I could not test all of these. The buildbot caught a few problems along these lines. gdb/ChangeLog 2019-07-10 Tom Tromey <tom@tromey.com> * defs.h: Don't include gdbarch.h. * aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h, alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h, ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c, cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h, cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c, compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c, cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c, dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c, dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c, dwarf2expr.c, expression.h, f-lang.c, frame-base.c, frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h, go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c, i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c, linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c, mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c, objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c, parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c, record-btrace.c, record.h, regcache-dump.c, regcache.h, riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y, sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c, sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c, sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h, target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c, tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c, utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c, xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update. * s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
2019-06-10 05:21:02 +08:00
#include "gdbarch.h"
struct trad_frame_cache
{
struct frame_info *this_frame;
CORE_ADDR this_base;
struct trad_frame_saved_reg *prev_regs;
struct frame_id this_id;
};
struct trad_frame_cache *
trad_frame_cache_zalloc (struct frame_info *this_frame)
{
struct trad_frame_cache *this_trad_cache;
this_trad_cache = FRAME_OBSTACK_ZALLOC (struct trad_frame_cache);
this_trad_cache->prev_regs = trad_frame_alloc_saved_regs (this_frame);
this_trad_cache->this_frame = this_frame;
return this_trad_cache;
}
/* See trad-frame.h. */
void
trad_frame_reset_saved_regs (struct gdbarch *gdbarch,
struct trad_frame_saved_reg *regs)
{
int numregs = gdbarch_num_cooked_regs (gdbarch);
for (int regnum = 0; regnum < numregs; regnum++)
{
regs[regnum].realreg = regnum;
regs[regnum].addr = -1;
}
}
struct trad_frame_saved_reg *
Add unit test to aarch64 prologue analyzer We don't have an effective way to test prologue analyzer which is highly dependent on instruction patterns in prologue generated by compiler. GDB prologue analyzer may not handle the new sequences generated by new compiler, or may still handle some sequences that generated by very old compilers which are no longer used. The former is a functionality issue, while the latter is a maintenance issue. The input and output of prologue analyzer is quite clear, so it fits for unit test. The input is series of instructions, and the output are 1) where prologue end, 2) where registers are saved. In aarch64, they are represented in 'struct aarch64_prologue_cache'. This patch refactors aarch64_analyze_prologue so it can read instructions from either real target or test harness. In unit test aarch64_analyze_prologue_test, aarch64_analyze_prologue gets instructions we prepared in the test, as the input of prologue analyzer. Then, we checked various fields in 'struct aarch64_prologue_cache'. gdb: 2016-12-02 Yao Qi <yao.qi@linaro.org> Pedro Alves <palves@redhat.com> * aarch64-tdep.c: Include "selftest.h". (abstract_instruction_reader): New class. (instruction_reader): New class. (aarch64_analyze_prologue): Add new parameter reader. Call reader.read instead of read_memory_unsigned_integer. [GDB_SELF_TEST] (instruction_reader_test): New class. (aarch64_analyze_prologue_test): New function. (_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register selftests::aarch64_analyze_prologue_test. * trad-frame.c (trad_frame_cache_zalloc): (trad_frame_alloc_saved_regs): Add a new function. * trad-frame.h (trad_frame_alloc_saved_regs): Declare.
2016-12-02 17:37:30 +08:00
trad_frame_alloc_saved_regs (struct gdbarch *gdbarch)
{
Introduce gdbarch_num_cooked_regs The expression gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch) is used quite often to find the number of cooked registers (raw + pseudo registers). This patch introduces gdbarch_num_cooked_regs, which does the equivalent. It substantially reduces required wrapping in some places, so should improve readability. There is a for loop in m68hc11_frame_unwind_cache that had iterated until (the equivalent of) gdbarch_num_cooked_regs (gdbarch) - 1. During review, we concluded that this is most likely an off-by-one mistake, so I replaced it with gdbarch_num_cooked_regs (gdbarch). gdb/ChangeLog: * gdbarch.sh (gdbarch_num_cooked_regs): New. * gdbarch.h: Re-generate. * ax-gdb.c (gen_expr): Use gdbarch_num_cooked_regs. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * findvar.c (value_of_register): Likewise. (value_of_register_lazy): Likewise. (address_from_register): Likewise. * frame.c (get_frame_register_bytes): Likewise. * gdbarch-selftests.c (register_to_value_test): Likewise. * h8300-tdep.c (h8300_register_type): Likewise. * i386-tdep.c (i386_dbx_reg_to_regnum): Likewise. (i386_svr4_reg_to_regnum): Likewise. * infcmd.c (default_print_registers_info): Likewise. (registers_info): Likewise. (print_vector_info): Likewise. (default_print_float_info): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mdebugread.c (mdebug_reg_to_regnum): Likewise. * mi/mi-main.c (mi_cmd_data_list_register_names): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_list_register_values): Likewise. (mi_cmd_data_write_register_values): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mips-tdep.c (print_gp_register_row): Likewise. (mips_print_registers_info): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * regcache.c (init_regcache_descr): Likewise. (register_size): Likewise. (register_dump::dump): Likewise. (cooked_read_test): Likewise. (cooked_write_test): Likewise. * rs6000-tdep.c (rs6000_register_sim_regno): Likewise. (rs6000_gdbarch_init): Likewise. * stabsread.c (stab_reg_to_regnum): Likewise. * stack.c (info_frame_command): Likewise. * target-descriptions.c (tdesc_register_name): Likewise. * trad-frame.c (trad_frame_alloc_saved_regs): Likewise. * tui/tui-regs.c (tui_show_register_group): Likewise. * user-regs.c (user_reg_map_name_to_regnum): Likewise. (user_reg_map_regnum_to_name): Likewise. (value_of_user_reg): Likewise. (maintenance_print_user_registers): Likewise. * xtensa-tdep.c (xtensa_find_register_by_name): Likewise. (xtensa_register_name): Likewise. (xtensa_register_type): Likewise. (xtensa_reg_to_regnum): Likewise. (xtensa_pseudo_register_read): Likewise. (xtensa_pseudo_register_write): Likewise.
2018-10-22 10:29:21 +08:00
int numregs = gdbarch_num_cooked_regs (gdbarch);
struct trad_frame_saved_reg *this_saved_regs
= FRAME_OBSTACK_CALLOC (numregs, struct trad_frame_saved_reg);
trad_frame_reset_saved_regs (gdbarch, this_saved_regs);
return this_saved_regs;
}
Add unit test to aarch64 prologue analyzer We don't have an effective way to test prologue analyzer which is highly dependent on instruction patterns in prologue generated by compiler. GDB prologue analyzer may not handle the new sequences generated by new compiler, or may still handle some sequences that generated by very old compilers which are no longer used. The former is a functionality issue, while the latter is a maintenance issue. The input and output of prologue analyzer is quite clear, so it fits for unit test. The input is series of instructions, and the output are 1) where prologue end, 2) where registers are saved. In aarch64, they are represented in 'struct aarch64_prologue_cache'. This patch refactors aarch64_analyze_prologue so it can read instructions from either real target or test harness. In unit test aarch64_analyze_prologue_test, aarch64_analyze_prologue gets instructions we prepared in the test, as the input of prologue analyzer. Then, we checked various fields in 'struct aarch64_prologue_cache'. gdb: 2016-12-02 Yao Qi <yao.qi@linaro.org> Pedro Alves <palves@redhat.com> * aarch64-tdep.c: Include "selftest.h". (abstract_instruction_reader): New class. (instruction_reader): New class. (aarch64_analyze_prologue): Add new parameter reader. Call reader.read instead of read_memory_unsigned_integer. [GDB_SELF_TEST] (instruction_reader_test): New class. (aarch64_analyze_prologue_test): New function. (_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register selftests::aarch64_analyze_prologue_test. * trad-frame.c (trad_frame_cache_zalloc): (trad_frame_alloc_saved_regs): Add a new function. * trad-frame.h (trad_frame_alloc_saved_regs): Declare.
2016-12-02 17:37:30 +08:00
/* A traditional frame is unwound by analysing the function prologue
and using the information gathered to track registers. For
non-optimized frames, the technique is reliable (just need to check
for all potential instruction sequences). */
struct trad_frame_saved_reg *
trad_frame_alloc_saved_regs (struct frame_info *this_frame)
{
struct gdbarch *gdbarch = get_frame_arch (this_frame);
return trad_frame_alloc_saved_regs (gdbarch);
}
enum { TF_REG_VALUE = -1, TF_REG_UNKNOWN = -2 };
int
trad_frame_value_p (struct trad_frame_saved_reg this_saved_regs[], int regnum)
{
return (this_saved_regs[regnum].realreg == TF_REG_VALUE);
}
int
trad_frame_addr_p (struct trad_frame_saved_reg this_saved_regs[], int regnum)
{
return (this_saved_regs[regnum].realreg >= 0
&& this_saved_regs[regnum].addr != -1);
}
int
trad_frame_realreg_p (struct trad_frame_saved_reg this_saved_regs[],
int regnum)
{
return (this_saved_regs[regnum].realreg >= 0
&& this_saved_regs[regnum].addr == -1);
}
void
trad_frame_set_value (struct trad_frame_saved_reg this_saved_regs[],
int regnum, LONGEST val)
{
/* Make the REALREG invalid, indicating that the ADDR contains the
register's value. */
this_saved_regs[regnum].realreg = TF_REG_VALUE;
this_saved_regs[regnum].addr = val;
}
/* See trad-frame.h. */
void
trad_frame_set_realreg (struct trad_frame_saved_reg this_saved_regs[],
int regnum, int realreg)
{
this_saved_regs[regnum].realreg = realreg;
this_saved_regs[regnum].addr = -1;
}
/* See trad-frame.h. */
void
trad_frame_set_addr (struct trad_frame_saved_reg this_saved_regs[],
int regnum, CORE_ADDR addr)
{
this_saved_regs[regnum].realreg = regnum;
this_saved_regs[regnum].addr = addr;
}
void
trad_frame_set_reg_value (struct trad_frame_cache *this_trad_cache,
int regnum, LONGEST val)
{
/* External interface for users of trad_frame_cache
(who cannot access the prev_regs object directly). */
trad_frame_set_value (this_trad_cache->prev_regs, regnum, val);
}
void
trad_frame_set_reg_realreg (struct trad_frame_cache *this_trad_cache,
int regnum, int realreg)
{
trad_frame_set_realreg (this_trad_cache->prev_regs, regnum, realreg);
}
void
trad_frame_set_reg_addr (struct trad_frame_cache *this_trad_cache,
int regnum, CORE_ADDR addr)
{
trad_frame_set_addr (this_trad_cache->prev_regs, regnum, addr);
}
Add a helper function to trad_frame to support register cache maps. Currently, signal frame handlers require explicitly coded calls to trad_frame_set_reg_addr() to describe the location of saved registers within a signal frame. This change permits the regcache_map_entry arrays used with regcache::supply_regset and regcache::collect_regset to be used to describe a block of saved registers given an initial address for the register block. Some systems use the same layout for registers in core dump notes, native register sets with ptrace(), and the register contexts saved in signal frames. On these systems, a single register map can now be used to describe the layout of registers in all three places. If a register map entry's size does not match the native size of a register, try to match the semantics used by regcache::transfer_regset. If a register slot is too large, assume that the register's value is stored in the first N bytes and ignore the remaning bytes. If the register slot is smaller than the register, assume the slot holds the low N bytes of the register's value. Read these low N bytes from the target and zero-extend them to generate a register value. While here, document the semantics for both regcache::transfer_regset and trad_frame with respect to register slot's whose size does not match the register's size. gdb/ChangeLog: * regcache.h (struct regcache_map_entry): Note that this type can be used with traditional frame caches. * trad-frame.c (trad_frame_set_reg_regmap): New. * trad-frame.h (trad_frame_set_reg_regmap): New.
2018-10-09 05:47:33 +08:00
void
trad_frame_set_reg_regmap (struct trad_frame_cache *this_trad_cache,
const struct regcache_map_entry *regmap,
CORE_ADDR addr, size_t size)
{
struct gdbarch *gdbarch = get_frame_arch (this_trad_cache->this_frame);
int offs = 0, count;
for (; (count = regmap->count) != 0; regmap++)
{
int regno = regmap->regno;
int slot_size = regmap->size;
if (slot_size == 0 && regno != REGCACHE_MAP_SKIP)
slot_size = register_size (gdbarch, regno);
if (offs + slot_size > size)
break;
if (regno == REGCACHE_MAP_SKIP)
offs += count * slot_size;
else
for (; count--; regno++, offs += slot_size)
{
/* Mimic the semantics of regcache::transfer_regset if a
register slot's size does not match the size of a
register.
If a register slot is larger than a register, assume
the register's value is stored in the first N bytes of
the slot and ignore the remaining bytes.
If the register slot is smaller than the register,
assume that the slot contains the low N bytes of the
register's value. Since trad_frame assumes that
registers stored by address are sized according to the
register, read the low N bytes and zero-extend them to
generate a register value. */
if (slot_size >= register_size (gdbarch, regno))
trad_frame_set_reg_addr (this_trad_cache, regno, addr + offs);
else
{
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
gdb_byte buf[slot_size];
if (target_read_memory (addr + offs, buf, sizeof buf) == 0)
{
LONGEST val
= extract_unsigned_integer (buf, sizeof buf, byte_order);
trad_frame_set_reg_value (this_trad_cache, regno, val);
}
}
}
}
}
void
trad_frame_set_unknown (struct trad_frame_saved_reg this_saved_regs[],
int regnum)
{
/* Make the REALREG invalid, indicating that the value is not known. */
this_saved_regs[regnum].realreg = TF_REG_UNKNOWN;
this_saved_regs[regnum].addr = -1;
}
struct value *
trad_frame_get_prev_register (struct frame_info *this_frame,
2004-07-31 Andrew Cagney <cagney@gnu.org> * trad-frame.c (trad_frame_get_prev_register): Rename trad_frame_get_prev_register. * vax-tdep.c (vax_frame_prev_register): Update. * trad-frame.h: Update. * trad-frame.c (trad_frame_get_register): Update. * sparcobsd-tdep.c (sparc32obsd_frame_prev_register): Update. * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_prev_register): Update. * sparc64obsd-tdep.c (sparc64obsd_frame_prev_register): Update. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_prev_register): Update. * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_prev_register): Update. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_prev_register): Update. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_prev_register): Update. * sparc-linux-tdep.c (sparc32_linux_sigtramp_frame_prev_register): Update. * s390-tdep.c (s390_frame_prev_register) (s390_stub_frame_prev_register) (s390_sigtramp_frame_prev_register): Update. * rs6000-tdep.c (rs6000_frame_prev_register): Update. * ppc-linux-tdep.c (ppc_linux_sigtramp_prev_register): Update. * mips-tdep.c (mips_mdebug_frame_prev_register): Update. * m88k-tdep.c (m88k_frame_prev_register) * m68hc11-tdep.c (m68hc11_frame_prev_register) * m32r-tdep.c (m32r_frame_prev_register): Update. * hppa-tdep.c (hppa_frame_prev_register_helper) * frv-tdep.c (frv_frame_prev_register): Update. * d10v-tdep.c (d10v_frame_prev_register): Update. * cris-tdep.c (cris_frame_prev_register): Update. * avr-tdep.c (avr_frame_prev_register): Update. * arm-tdep.c (arm_prologue_prev_register) (arm_sigtramp_prev_register): Update.
2004-08-01 05:53:17 +08:00
struct trad_frame_saved_reg this_saved_regs[],
int regnum)
{
if (trad_frame_addr_p (this_saved_regs, regnum))
/* The register was saved in memory. */
return frame_unwind_got_memory (this_frame, regnum,
this_saved_regs[regnum].addr);
else if (trad_frame_realreg_p (this_saved_regs, regnum))
return frame_unwind_got_register (this_frame, regnum,
this_saved_regs[regnum].realreg);
else if (trad_frame_value_p (this_saved_regs, regnum))
/* The register's value is available. */
return frame_unwind_got_constant (this_frame, regnum,
this_saved_regs[regnum].addr);
else
return frame_unwind_got_optimized (this_frame, regnum);
}
struct value *
trad_frame_get_register (struct trad_frame_cache *this_trad_cache,
struct frame_info *this_frame,
int regnum)
{
return trad_frame_get_prev_register (this_frame, this_trad_cache->prev_regs,
regnum);
}
void
trad_frame_set_id (struct trad_frame_cache *this_trad_cache,
struct frame_id this_id)
{
this_trad_cache->this_id = this_id;
}
void
trad_frame_get_id (struct trad_frame_cache *this_trad_cache,
struct frame_id *this_id)
{
(*this_id) = this_trad_cache->this_id;
}
void
trad_frame_set_this_base (struct trad_frame_cache *this_trad_cache,
CORE_ADDR this_base)
{
this_trad_cache->this_base = this_base;
}
CORE_ADDR
trad_frame_get_this_base (struct trad_frame_cache *this_trad_cache)
{
return this_trad_cache->this_base;
}