binutils-gdb/gdb/build-id.c

244 lines
6.6 KiB
C
Raw Normal View History

fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
/* build-id-related functions.
Copyright (C) 1991-2023 Free Software Foundation, Inc.
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "bfd.h"
Revert the header-sorting patch Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.
2019-04-07 03:38:10 +08:00
#include "gdb_bfd.h"
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
#include "build-id.h"
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
#include "gdbsupport/gdb_vecs.h"
Revert the header-sorting patch Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.
2019-04-07 03:38:10 +08:00
#include "symfile.h"
#include "objfiles.h"
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
#include "filenames.h"
Convert "remote:" sysroots to "target:" and remove "remote:" The functionality of "target:" sysroots is a superset of the functionality of "remote:" sysroots. This commit causes the "set sysroot" command to rewrite "remote:" sysroots as "target:" sysroots and replaces "remote:" specific code with "target:" specific code where still necessary. gdb/ChangeLog: * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition. (remote_filename_p): Remove declaration. (remote_bfd_open): Likewise. * remote.c (remote_bfd_iovec_open): Remove function. (remote_bfd_iovec_close): Likewise. (remote_bfd_iovec_pread): Likewise. (remote_bfd_iovec_stat): Likewise. (remote_filename_p): Likewise. (remote_bfd_open): Likewise. * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration. * symfile.c (separate_debug_file_exists): Use gdb_bfd_open. (gdb_bfd_open_maybe_remote): Remove function. (symfile_bfd_open): Replace remote filename check with target filename check. (reread_symbols): Use gdb_bfd_open. * build-id.c (gdbcore.h): New include. (build_id_to_debug_bfd): Use gdb_bfd_open. * infcmd.c (attach_command_post_wait): Remove remote filename check. * solib.c (solib_find): Replace remote-specific handling with target-specific handling. Update comments where necessary. (solib_bfd_open): Replace remote-specific handling with target-specific handling. (gdb_sysroot_changed): New function. (_initialize_solib): Call the above when gdb_sysroot changes. * windows-tdep.c (gdbcore.h): New include. (windows_xfer_shared_library): Use gdb_bfd_open.
2015-04-02 20:38:29 +08:00
#include "gdbcore.h"
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
/* See build-id.h. */
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-08 03:49:08 +08:00
const struct bfd_build_id *
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
build_id_bfd_get (bfd *abfd)
{
/* Dynamic objfiles such as ones created by JIT reader API
have no underlaying bfd structure (that is, objfile->obfd
is NULL). */
if (abfd == nullptr)
return nullptr;
Core file build-id support This patch uses new BFD support for detecting build-ids in core files. After this patch, it is possible to run gdb with only the core file, and gdb will automatically load the executable and debug info [example from tests]: $ gdb -nx -q (gdb) core-file corefile-buildid.core [New LWP 29471] Reading symbols from gdb.base/corefile-buildid/debugdir-exec/.build-id/36/fe5722c5a7ca3ac746a84e223c6a2a69193a24... Core was generated by `outputs/gdb.base/coref'. Program terminated with signal SIGABRT, Aborted. (gdb) This work is based on functionality available in Fedora originally written by Jan Kratochvil. Regression tested on buildbot. gdb/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * build-id.c (build_id_bfd_get): Permit bfd_core, too. (build_id_to_debug_bfd): Make static, rewriting to use build_id_to_bfd_suffix. (build_id_to_bfd_suffix): Copy of build_id_to_debug_bfd, adding `suffix' parameter. Append SUFFIX to file names when searching for matching files. (build_id_to_debug_bfd): Use build_id_to_bfd_suffix. (build_id_to_exec_bfd): Likewise. * build-id.h (build_id_to_debug_bfd): Clarify that function searches for BFD of debug info file. (build_id_to_exec_bfd): Declare. * corelow.c: Include build-id.h. (locate_exec_from_corefile_build_id): New function. (core_target_open): If no executable BFD is found, search for a core file BFD using build-id. gdb/testsuite/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * gdb.base/corefile-buildid-shlib-shr.c: New file. * gdb.base/corefile-buildid-shlib.c: New file. * gdb.base/corefile-buildid.c: New file. * gdb.base/corefile-buildid.exp: New file. Change-Id: I15e9e8e58f10c68b5cae55e2eba58df1e8aef529
2019-12-08 01:35:03 +08:00
if (!bfd_check_format (abfd, bfd_object)
&& !bfd_check_format (abfd, bfd_core))
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
return NULL;
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-08 03:49:08 +08:00
if (abfd->build_id != NULL)
return abfd->build_id;
/* No build-id */
return NULL;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
}
/* See build-id.h. */
int
build_id_verify (bfd *abfd, size_t check_len, const bfd_byte *check)
{
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-08 03:49:08 +08:00
const struct bfd_build_id *found;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
int retval = 0;
found = build_id_bfd_get (abfd);
if (found == NULL)
warning (_("File \"%s\" has no build-id, file skipped"),
bfd_get_filename (abfd));
else if (found->size != check_len
gdb, gdbserver, gdbsupport: fix leading space vs tabs issues Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
2020-11-02 23:26:14 +08:00
|| memcmp (found->data, check, found->size) != 0)
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
warning (_("File \"%s\" has a different build-id, file skipped"),
bfd_get_filename (abfd));
else
retval = 1;
return retval;
}
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
/* Helper for build_id_to_debug_bfd. LINK is a path to a potential
build-id-based separate debug file, potentially a symlink to the real file.
If the file exists and matches BUILD_ID, return a BFD reference to it. */
static gdb_bfd_ref_ptr
build_id_to_debug_bfd_1 (const std::string &link, size_t build_id_len,
const bfd_byte *build_id)
{
if (separate_debug_file_debug)
{
gdb_printf (gdb_stdlog, _(" Trying %s..."), link.c_str ());
gdb_flush (gdb_stdlog);
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
}
/* lrealpath() is expensive even for the usually non-existent files. */
Fix PR gdb/17917 Lookup build-id in remote binaries GDB doesn't support loading debug files using build-id from remote target filesystems. This is the case when gdbserver attached to a process and a gdb target remote occurs over tcp. With this change we make build-id lookups possible: (gdb) show debug-file-directory The directory where separate debug symbols are searched for is "/usr/local/lib/debug". (gdb) set debug-file-directory /usr/lib/debug (gdb) show sysroot The current system root is "target:". (gdb) target extended-remote :46615 Remote debugging using :46615 warning: Can not parse XML target description; XML support was disabled at compile time Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading symbols from target:/usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug... Reading /lib/x86_64-linux-gnu/libpcre2-8.so.0 from remote target... ... Before this change, the lookups would have been (GNU gdb (GDB) Fedora 10.2-3.fc34): (gdb) target extended-remote :46615 Remote debugging using :46615 Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/sbin/.debug/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug//usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading target:/usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Missing separate debuginfo for target:/usr/sbin/mariadbd Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug (No debugging symbols found in target:/usr/sbin/mariadbd) Observe it didn't look for /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug on the remote target (where it is) and expected them to be installed locally. As a minor optimization, this also changes the build-id lookup such that if sysroot is empty, no second lookup of the same location is performed. Change-Id: I5181696d271c325a25a0805a8defb8ab7f9b3f55 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17917
2021-10-18 14:06:47 +08:00
gdb::unique_xmalloc_ptr<char> filename_holder;
const char *filename = nullptr;
if (startswith (link, TARGET_SYSROOT_PREFIX))
filename = link.c_str ();
else if (access (link.c_str (), F_OK) == 0)
{
filename_holder.reset (lrealpath (link.c_str ()));
filename = filename_holder.get ();
}
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
if (filename == NULL)
{
if (separate_debug_file_debug)
gdb_printf (gdb_stdlog,
_(" no, unable to compute real path\n"));
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
return {};
}
/* We expect to be silent on the non-existing files. */
Fix PR gdb/17917 Lookup build-id in remote binaries GDB doesn't support loading debug files using build-id from remote target filesystems. This is the case when gdbserver attached to a process and a gdb target remote occurs over tcp. With this change we make build-id lookups possible: (gdb) show debug-file-directory The directory where separate debug symbols are searched for is "/usr/local/lib/debug". (gdb) set debug-file-directory /usr/lib/debug (gdb) show sysroot The current system root is "target:". (gdb) target extended-remote :46615 Remote debugging using :46615 warning: Can not parse XML target description; XML support was disabled at compile time Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading symbols from target:/usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug... Reading /lib/x86_64-linux-gnu/libpcre2-8.so.0 from remote target... ... Before this change, the lookups would have been (GNU gdb (GDB) Fedora 10.2-3.fc34): (gdb) target extended-remote :46615 Remote debugging using :46615 Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/sbin/.debug/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug//usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading target:/usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Missing separate debuginfo for target:/usr/sbin/mariadbd Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug (No debugging symbols found in target:/usr/sbin/mariadbd) Observe it didn't look for /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug on the remote target (where it is) and expected them to be installed locally. As a minor optimization, this also changes the build-id lookup such that if sysroot is empty, no second lookup of the same location is performed. Change-Id: I5181696d271c325a25a0805a8defb8ab7f9b3f55 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17917
2021-10-18 14:06:47 +08:00
gdb_bfd_ref_ptr debug_bfd = gdb_bfd_open (filename, gnutarget);
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
if (debug_bfd == NULL)
{
if (separate_debug_file_debug)
gdb_printf (gdb_stdlog, _(" no, unable to open.\n"));
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
return {};
}
if (!build_id_verify (debug_bfd.get(), build_id_len, build_id))
{
if (separate_debug_file_debug)
gdb_printf (gdb_stdlog, _(" no, build-id does not match.\n"));
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
return {};
}
if (separate_debug_file_debug)
gdb_printf (gdb_stdlog, _(" yes!\n"));
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
return debug_bfd;
}
Core file build-id support This patch uses new BFD support for detecting build-ids in core files. After this patch, it is possible to run gdb with only the core file, and gdb will automatically load the executable and debug info [example from tests]: $ gdb -nx -q (gdb) core-file corefile-buildid.core [New LWP 29471] Reading symbols from gdb.base/corefile-buildid/debugdir-exec/.build-id/36/fe5722c5a7ca3ac746a84e223c6a2a69193a24... Core was generated by `outputs/gdb.base/coref'. Program terminated with signal SIGABRT, Aborted. (gdb) This work is based on functionality available in Fedora originally written by Jan Kratochvil. Regression tested on buildbot. gdb/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * build-id.c (build_id_bfd_get): Permit bfd_core, too. (build_id_to_debug_bfd): Make static, rewriting to use build_id_to_bfd_suffix. (build_id_to_bfd_suffix): Copy of build_id_to_debug_bfd, adding `suffix' parameter. Append SUFFIX to file names when searching for matching files. (build_id_to_debug_bfd): Use build_id_to_bfd_suffix. (build_id_to_exec_bfd): Likewise. * build-id.h (build_id_to_debug_bfd): Clarify that function searches for BFD of debug info file. (build_id_to_exec_bfd): Declare. * corelow.c: Include build-id.h. (locate_exec_from_corefile_build_id): New function. (core_target_open): If no executable BFD is found, search for a core file BFD using build-id. gdb/testsuite/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * gdb.base/corefile-buildid-shlib-shr.c: New file. * gdb.base/corefile-buildid-shlib.c: New file. * gdb.base/corefile-buildid.c: New file. * gdb.base/corefile-buildid.exp: New file. Change-Id: I15e9e8e58f10c68b5cae55e2eba58df1e8aef529
2019-12-08 01:35:03 +08:00
/* Common code for finding BFDs of a given build-id. This function
works with both debuginfo files (SUFFIX == ".debug") and executable
files (SUFFIX == ""). */
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
Core file build-id support This patch uses new BFD support for detecting build-ids in core files. After this patch, it is possible to run gdb with only the core file, and gdb will automatically load the executable and debug info [example from tests]: $ gdb -nx -q (gdb) core-file corefile-buildid.core [New LWP 29471] Reading symbols from gdb.base/corefile-buildid/debugdir-exec/.build-id/36/fe5722c5a7ca3ac746a84e223c6a2a69193a24... Core was generated by `outputs/gdb.base/coref'. Program terminated with signal SIGABRT, Aborted. (gdb) This work is based on functionality available in Fedora originally written by Jan Kratochvil. Regression tested on buildbot. gdb/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * build-id.c (build_id_bfd_get): Permit bfd_core, too. (build_id_to_debug_bfd): Make static, rewriting to use build_id_to_bfd_suffix. (build_id_to_bfd_suffix): Copy of build_id_to_debug_bfd, adding `suffix' parameter. Append SUFFIX to file names when searching for matching files. (build_id_to_debug_bfd): Use build_id_to_bfd_suffix. (build_id_to_exec_bfd): Likewise. * build-id.h (build_id_to_debug_bfd): Clarify that function searches for BFD of debug info file. (build_id_to_exec_bfd): Declare. * corelow.c: Include build-id.h. (locate_exec_from_corefile_build_id): New function. (core_target_open): If no executable BFD is found, search for a core file BFD using build-id. gdb/testsuite/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * gdb.base/corefile-buildid-shlib-shr.c: New file. * gdb.base/corefile-buildid-shlib.c: New file. * gdb.base/corefile-buildid.c: New file. * gdb.base/corefile-buildid.exp: New file. Change-Id: I15e9e8e58f10c68b5cae55e2eba58df1e8aef529
2019-12-08 01:35:03 +08:00
static gdb_bfd_ref_ptr
build_id_to_bfd_suffix (size_t build_id_len, const bfd_byte *build_id,
const char *suffix)
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
{
/* Keep backward compatibility so that DEBUG_FILE_DIRECTORY being "" will
cause "/.build-id/..." lookups. */
Make delim_string_to_char_ptr_vec return an std::vector This patch makes delim_string_to_char_ptr_vec and all related functions use std::vector of gdb::unique_xmalloc_ptr. This allows getting rid of make_cleanup_free_char_ptr_vec. Returning a vector of unique_xmalloc_ptr instead of std::string allows to minimize the impacts on the calling code. We can evaluate later whether we could/should return a vector of std::strings instead. gdb/ChangeLog: * common/gdb_vecs.h (make_cleanup_free_char_ptr_vec): Remove. (delim_string_to_char_ptr_vec): Return std::vector of gdb::unique_xmalloc_ptr. (dirnames_to_char_ptr_vec_append): Take std::vector of gdb::unique_xmalloc_ptr. (dirnames_to_char_ptr_vec): Return std::vector of gdb::unique_xmalloc_ptr. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Take std::vector of gdb::unique_xmalloc_ptr, adjust the code. (delim_string_to_char_ptr_vec): Return an std::vector of gdb::unique_xmalloc_ptr, adjust the code. (dirnames_to_char_ptr_vec_append): Take an std::vector of gdb::unique_xmalloc_ptr, adjust the code. (dirnames_to_char_ptr_vec): Return an std::vector of gdb::unique_xmalloc_ptr, adjust the code. * auto-load.c (auto_load_safe_path_vec): Change type to std::vector of gdb::unique_xmalloc_ptr. (auto_load_expand_dir_vars): Return an std::vector of gdb::unique_xmalloc_ptr, adjust the code. (auto_load_safe_path_vec_update): Adjust. (filename_is_in_auto_load_safe_path_vec): Adjust. (auto_load_objfile_script_1): Adjust. * build-id.c (build_id_to_debug_bfd): Adjust. * linux-thread-db.c (thread_db_load_search): Adjust. * source.c (add_path): Adjust. (openp): Adjust. * symfile.c (find_separate_debug_file): Adjust. * utils.c (do_free_char_ptr_vec): Remove. (make_cleanup_free_char_ptr_vec): Remove. gdb/gdbserver/ChangeLog: * server.c (parse_debug_format_options): Adjust to delim_string_to_char_ptr_vec changes. * thread-db.c (thread_db_load_search): Adjust to dirnames_to_char_ptr_vec changes.
2018-03-03 12:22:06 +08:00
std::vector<gdb::unique_xmalloc_ptr<char>> debugdir_vec
gdb: make string-like set show commands use std::string variable String-like settings (var_string, var_filename, var_optional_filename, var_string_noescape) currently take a pointer to a `char *` storage variable (typically global) that holds the setting's value. I'd like to "mordernize" this by changing them to use an std::string for storage. An obvious reason is that string operations on std::string are often easier to write than with C strings. And they avoid having to do any manual memory management. Another interesting reason is that, with `char *`, nullptr and an empty string often both have the same meaning of "no value". String settings are initially nullptr (unless initialized otherwise). But when doing "set foo" (where `foo` is a string setting), the setting now points to an empty string. For example, solib_search_path is nullptr at startup, but points to an empty string after doing "set solib-search-path". This leads to some code that needs to check for both to check for "no value". Or some code that converts back and forth between NULL and "" when getting or setting the value. I find this very error-prone, because it is very easy to forget one or the other. With std::string, we at least know that the variable is not "NULL". There is only one way of representing an empty string setting, that is with an empty string. I was wondering whether the distinction between NULL and "" would be important for some setting, but it doesn't seem so. If that ever happens, it would be more C++-y and self-descriptive to use optional<string> anyway. Actually, there's one spot where this distinction mattered, it's in init_history, for the test gdb.base/gdbinit-history.exp. init_history sets the history filename to the default ".gdb_history" if it sees that the setting was never set - if history_filename is nullptr. If history_filename is an empty string, it means the setting was explicitly cleared, so it leaves it as-is. With the change to std::string, this distinction doesn't exist anymore. This can be fixed by moving the code that chooses a good default value for history_filename to _initialize_top. This is ran before -ex commands are processed, so an -ex command can then clear that value if needed (what gdb.base/gdbinit-history.exp tests). Another small improvement, in my opinion is that we can now easily give string parameters initial values, by simply initializing the global variables, instead of xstrdup-ing it in the _initialize function. In Python and Guile, when registering a string-like parameter, we allocate (with new) an std::string that is owned by the param_smob (in Guile) and the parmpy_object (in Python) objects. This patch started by changing all relevant add_setshow_* commands to take an `std::string *` instead of a `char **` and fixing everything that failed to build. That includes of course all string setting variable and their uses. string_option_def now uses an std::string also, because there's a connection between options and settings (see add_setshow_cmds_for_options). The add_path function in source.c is really complex and twisted, I'd rather not try to change it to work on an std::string right now. Instead, I added an overload that copies the std:string to a `char *` and back. This means more copying, but this is not used in a hot path at all, so I think it is acceptable. Change-Id: I92c50a1bdd8307141cdbacb388248e4e4fc08c93 Co-authored-by: Lancelot SIX <lsix@lancelotsix.com>
2021-09-11 05:10:13 +08:00
= dirnames_to_char_ptr_vec (debug_file_directory.c_str ());
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
Make delim_string_to_char_ptr_vec return an std::vector This patch makes delim_string_to_char_ptr_vec and all related functions use std::vector of gdb::unique_xmalloc_ptr. This allows getting rid of make_cleanup_free_char_ptr_vec. Returning a vector of unique_xmalloc_ptr instead of std::string allows to minimize the impacts on the calling code. We can evaluate later whether we could/should return a vector of std::strings instead. gdb/ChangeLog: * common/gdb_vecs.h (make_cleanup_free_char_ptr_vec): Remove. (delim_string_to_char_ptr_vec): Return std::vector of gdb::unique_xmalloc_ptr. (dirnames_to_char_ptr_vec_append): Take std::vector of gdb::unique_xmalloc_ptr. (dirnames_to_char_ptr_vec): Return std::vector of gdb::unique_xmalloc_ptr. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Take std::vector of gdb::unique_xmalloc_ptr, adjust the code. (delim_string_to_char_ptr_vec): Return an std::vector of gdb::unique_xmalloc_ptr, adjust the code. (dirnames_to_char_ptr_vec_append): Take an std::vector of gdb::unique_xmalloc_ptr, adjust the code. (dirnames_to_char_ptr_vec): Return an std::vector of gdb::unique_xmalloc_ptr, adjust the code. * auto-load.c (auto_load_safe_path_vec): Change type to std::vector of gdb::unique_xmalloc_ptr. (auto_load_expand_dir_vars): Return an std::vector of gdb::unique_xmalloc_ptr, adjust the code. (auto_load_safe_path_vec_update): Adjust. (filename_is_in_auto_load_safe_path_vec): Adjust. (auto_load_objfile_script_1): Adjust. * build-id.c (build_id_to_debug_bfd): Adjust. * linux-thread-db.c (thread_db_load_search): Adjust. * source.c (add_path): Adjust. (openp): Adjust. * symfile.c (find_separate_debug_file): Adjust. * utils.c (do_free_char_ptr_vec): Remove. (make_cleanup_free_char_ptr_vec): Remove. gdb/gdbserver/ChangeLog: * server.c (parse_debug_format_options): Adjust to delim_string_to_char_ptr_vec changes. * thread-db.c (thread_db_load_search): Adjust to dirnames_to_char_ptr_vec changes.
2018-03-03 12:22:06 +08:00
for (const gdb::unique_xmalloc_ptr<char> &debugdir : debugdir_vec)
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
{
const gdb_byte *data = build_id;
size_t size = build_id_len;
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
/* Compute where the file named after the build-id would be.
If debugdir is "/usr/lib/debug" and the build-id is abcdef, this will
gdb, gdbserver, gdbsupport: fix leading space vs tabs issues Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
2020-11-02 23:26:14 +08:00
give "/usr/lib/debug/.build-id/ab/cdef.debug". */
std::string link = debugdir.get ();
link += "/.build-id/";
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
if (size > 0)
{
size--;
string_appendf (link, "%02x/", (unsigned) *data++);
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
}
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
while (size-- > 0)
string_appendf (link, "%02x", (unsigned) *data++);
Core file build-id support This patch uses new BFD support for detecting build-ids in core files. After this patch, it is possible to run gdb with only the core file, and gdb will automatically load the executable and debug info [example from tests]: $ gdb -nx -q (gdb) core-file corefile-buildid.core [New LWP 29471] Reading symbols from gdb.base/corefile-buildid/debugdir-exec/.build-id/36/fe5722c5a7ca3ac746a84e223c6a2a69193a24... Core was generated by `outputs/gdb.base/coref'. Program terminated with signal SIGABRT, Aborted. (gdb) This work is based on functionality available in Fedora originally written by Jan Kratochvil. Regression tested on buildbot. gdb/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * build-id.c (build_id_bfd_get): Permit bfd_core, too. (build_id_to_debug_bfd): Make static, rewriting to use build_id_to_bfd_suffix. (build_id_to_bfd_suffix): Copy of build_id_to_debug_bfd, adding `suffix' parameter. Append SUFFIX to file names when searching for matching files. (build_id_to_debug_bfd): Use build_id_to_bfd_suffix. (build_id_to_exec_bfd): Likewise. * build-id.h (build_id_to_debug_bfd): Clarify that function searches for BFD of debug info file. (build_id_to_exec_bfd): Declare. * corelow.c: Include build-id.h. (locate_exec_from_corefile_build_id): New function. (core_target_open): If no executable BFD is found, search for a core file BFD using build-id. gdb/testsuite/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * gdb.base/corefile-buildid-shlib-shr.c: New file. * gdb.base/corefile-buildid-shlib.c: New file. * gdb.base/corefile-buildid.c: New file. * gdb.base/corefile-buildid.exp: New file. Change-Id: I15e9e8e58f10c68b5cae55e2eba58df1e8aef529
2019-12-08 01:35:03 +08:00
link += suffix;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
gdb_bfd_ref_ptr debug_bfd
= build_id_to_debug_bfd_1 (link, build_id_len, build_id);
if (debug_bfd != NULL)
return debug_bfd;
Introduce "set debug separate-debug-file" I helped someone figure out why their separate debug info (debug link-based) was not found by gdb. It turns out that the debug file was not named properly. It made me realize that it is quite difficult to diagnose this kind of problems. This patch adds some debug output to show where GDB looks for those files, so that it should be (more) obvious to find what's wrong. Here's an example of the result, first with an example of unsuccessful lookup, and then a successful one. (gdb) set debug separate-debug-file on (gdb) file /usr/bin/gnome-calculator Reading symbols from /usr/bin/gnome-calculator... Looking for separate debug info (build-id) for /usr/bin/gnome-calculator Trying /usr/local/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Looking for separate debug info (debug link) for /usr/bin/gnome-calculator Trying /usr/bin/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Trying /usr/bin/.debug/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Trying /usr/local/lib/debug//usr/bin/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug (no debugging symbols found)...done. (gdb) set debug-file-directory /usr/lib/debug (gdb) file /usr/bin/gnome-calculator Reading symbols from /usr/bin/gnome-calculator... Looking for separate debug info by build-id for /usr/bin/gnome-calculator Trying /usr/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Reading symbols from /usr/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug...done. done. Note: here, the debug link happens to be named like the build-id, but it doesn't have to be this way. It puzzled me for a minute. gdb/ChangeLog: * NEWS (Changes since GDB 8.0): Announce {set,show} debug separate-debug-file commands. * symfile.h (separate_debug_file_debug): New global. * symfile.c (separate_debug_file_debug): New global. (separate_debug_file_exists, find_separate_debug_file): Add debug output. (_initialize_symfile): Add "set debug separate-debug-file" command. * build-id.c (build_id_to_debug_bfd, find_separate_debug_file_by_buildid): Add debug output. gdb/doc/ChangeLog: * gdb.texinfo (Optional Messages about Internal Happenings): Document {set,show} debug separate-debug-file commands.
2017-06-12 05:16:01 +08:00
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
/* Try to look under the sysroot as well. If the sysroot is
gdb, gdbserver, gdbsupport: fix leading space vs tabs issues Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
2020-11-02 23:26:14 +08:00
"/the/sysroot", it will give
Fix PR gdb/17917 Lookup build-id in remote binaries GDB doesn't support loading debug files using build-id from remote target filesystems. This is the case when gdbserver attached to a process and a gdb target remote occurs over tcp. With this change we make build-id lookups possible: (gdb) show debug-file-directory The directory where separate debug symbols are searched for is "/usr/local/lib/debug". (gdb) set debug-file-directory /usr/lib/debug (gdb) show sysroot The current system root is "target:". (gdb) target extended-remote :46615 Remote debugging using :46615 warning: Can not parse XML target description; XML support was disabled at compile time Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading symbols from target:/usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug... Reading /lib/x86_64-linux-gnu/libpcre2-8.so.0 from remote target... ... Before this change, the lookups would have been (GNU gdb (GDB) Fedora 10.2-3.fc34): (gdb) target extended-remote :46615 Remote debugging using :46615 Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/sbin/.debug/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug//usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading target:/usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Missing separate debuginfo for target:/usr/sbin/mariadbd Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug (No debugging symbols found in target:/usr/sbin/mariadbd) Observe it didn't look for /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug on the remote target (where it is) and expected them to be installed locally. As a minor optimization, this also changes the build-id lookup such that if sysroot is empty, no second lookup of the same location is performed. Change-Id: I5181696d271c325a25a0805a8defb8ab7f9b3f55 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17917
2021-10-18 14:06:47 +08:00
"/the/sysroot/usr/lib/debug/.build-id/ab/cdef.debug". */
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
Fix PR gdb/17917 Lookup build-id in remote binaries GDB doesn't support loading debug files using build-id from remote target filesystems. This is the case when gdbserver attached to a process and a gdb target remote occurs over tcp. With this change we make build-id lookups possible: (gdb) show debug-file-directory The directory where separate debug symbols are searched for is "/usr/local/lib/debug". (gdb) set debug-file-directory /usr/lib/debug (gdb) show sysroot The current system root is "target:". (gdb) target extended-remote :46615 Remote debugging using :46615 warning: Can not parse XML target description; XML support was disabled at compile time Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading symbols from target:/usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug... Reading /lib/x86_64-linux-gnu/libpcre2-8.so.0 from remote target... ... Before this change, the lookups would have been (GNU gdb (GDB) Fedora 10.2-3.fc34): (gdb) target extended-remote :46615 Remote debugging using :46615 Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/sbin/.debug/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug//usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading target:/usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Missing separate debuginfo for target:/usr/sbin/mariadbd Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug (No debugging symbols found in target:/usr/sbin/mariadbd) Observe it didn't look for /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug on the remote target (where it is) and expected them to be installed locally. As a minor optimization, this also changes the build-id lookup such that if sysroot is empty, no second lookup of the same location is performed. Change-Id: I5181696d271c325a25a0805a8defb8ab7f9b3f55 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17917
2021-10-18 14:06:47 +08:00
if (!gdb_sysroot.empty ())
{
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
link = gdb_sysroot + link;
debug_bfd = build_id_to_debug_bfd_1 (link, build_id_len, build_id);
if (debug_bfd != NULL)
return debug_bfd;
}
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
}
Look for build-id-based separate debug files under the sysroot When looking for a separate debug file that matches a given build-id, GDB only looks in the host's debug dir (typically /usr/lib/debug). This patch makes it look in the sysroot as well. This is to match the behavior of GDB when using debuglink-based separate debug files, introduced in : 402d2bfec42 ("Look for separate debug files in debug directories under a sysroot.") In the following example, my sysroot is "/tmp/sysroot" and I am trying to load symbols for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so. This is the current behavior: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path <snip> (No debugging symbols found in /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so) With this patch: (gdb) file /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Reading symbols from /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so... Looking for separate debug info (build-id) for /tmp/sysroot/usr/lib/arm-linux-gnueabihf/gconv/EBCDIC-AT-DE.so Trying /usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... no, unable to compute real path Trying /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... yes! Reading symbols from /tmp/sysroot/usr/lib/debug/.build-id/f3/d6594d2600e985812cd4ba2ad083ac2aceae22.debug... In the original code, there is a suspicious "abfd.release ()" in build_id_to_debug_bfd, that I don't understand. If a file with the right name exists but its build-id note doesn't match, we release (leak) our reference, meaning the file will stay open? I removed it in the new code, so that the reference is dropped if we end up not using that file. I tested briefly by corrupting a separate debug file to trigger this code, nothing exploded. gdb/ChangeLog: * build-id.c (build_id_to_debug_bfd_1): New function. (build_id_to_debug_bfd): Look for separate debug file in sysroot.
2019-02-23 04:09:23 +08:00
return {};
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
}
/* See build-id.h. */
Core file build-id support This patch uses new BFD support for detecting build-ids in core files. After this patch, it is possible to run gdb with only the core file, and gdb will automatically load the executable and debug info [example from tests]: $ gdb -nx -q (gdb) core-file corefile-buildid.core [New LWP 29471] Reading symbols from gdb.base/corefile-buildid/debugdir-exec/.build-id/36/fe5722c5a7ca3ac746a84e223c6a2a69193a24... Core was generated by `outputs/gdb.base/coref'. Program terminated with signal SIGABRT, Aborted. (gdb) This work is based on functionality available in Fedora originally written by Jan Kratochvil. Regression tested on buildbot. gdb/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * build-id.c (build_id_bfd_get): Permit bfd_core, too. (build_id_to_debug_bfd): Make static, rewriting to use build_id_to_bfd_suffix. (build_id_to_bfd_suffix): Copy of build_id_to_debug_bfd, adding `suffix' parameter. Append SUFFIX to file names when searching for matching files. (build_id_to_debug_bfd): Use build_id_to_bfd_suffix. (build_id_to_exec_bfd): Likewise. * build-id.h (build_id_to_debug_bfd): Clarify that function searches for BFD of debug info file. (build_id_to_exec_bfd): Declare. * corelow.c: Include build-id.h. (locate_exec_from_corefile_build_id): New function. (core_target_open): If no executable BFD is found, search for a core file BFD using build-id. gdb/testsuite/ChangeLog: 2019-12-07 Keith Seitz <keiths@redhat.com> * gdb.base/corefile-buildid-shlib-shr.c: New file. * gdb.base/corefile-buildid-shlib.c: New file. * gdb.base/corefile-buildid.c: New file. * gdb.base/corefile-buildid.exp: New file. Change-Id: I15e9e8e58f10c68b5cae55e2eba58df1e8aef529
2019-12-08 01:35:03 +08:00
gdb_bfd_ref_ptr
build_id_to_debug_bfd (size_t build_id_len, const bfd_byte *build_id)
{
return build_id_to_bfd_suffix (build_id_len, build_id, ".debug");
}
/* See build-id.h. */
gdb_bfd_ref_ptr
build_id_to_exec_bfd (size_t build_id_len, const bfd_byte *build_id)
{
return build_id_to_bfd_suffix (build_id_len, build_id, "");
}
/* See build-id.h. */
std::string
gdb: defer warnings when loading separate debug files Currently, when GDB loads debug information from a separate debug file, there are a couple of warnings that could be produced if things go wrong. In find_separate_debug_file_by_buildid (build-id.c) GDB can give a warning if the separate debug file doesn't include any actual debug information, and in separate_debug_file_exists (symfile.c) we can warn if the CRC checksum in the separate debug file doesn't match the checksum in the original executable. The problem here is that, when looking up debug information, GDB will try several different approaches, lookup by build-id, lookup by debug-link, and then a lookup from debuginfod. GDB can potentially give a warning from an earlier attempt, and then succeed with a later attempt. In the cases I have run into this is primarily a warning about some out of date debug information on my machine, but then GDB finds the correct information using debuginfod. This can be confusing to a user, they will see warnings from GDB when really everything is working just fine. For example: warning: the debug information found in "/usr/lib/debug//lib64/ld-2.32.so.debug" \ does not match "/lib64/ld-linux-x86-64.so.2" (CRC mismatch). This diagnostic was printed on Fedora 33 even when the correct debuginfo was downloaded. In this patch I propose that we defer any warnings related to looking up debug information from a separate debug file. If any of the approaches are successful then GDB will not print any of the warnings. As far as the user is concerned, everything "just worked". Only if GDB completely fails to find any suitable debug information will the warnings be printed. The crc_mismatch test compiles two executables: crc_mismatch and crc_mismatch-2 and then strips them of debuginfo creating separate debug files. The test then replaces crc_mismatch-2.debug with crc_mismatch.debug to trigger "CRC mismatch" warning. A local debuginfod server is setup to supply the correct debug file, now when GDB looks up the debug info no warning is given. The build-id-no-debug-warning.exp is similar to the previous test. It triggers the "separate debug info file has no debug info" warning by replacing the build-id based .debug file with the stripped binary and then loading it to GDB. It then also sets up local debuginfod server with the correct debug file to download to make sure no warnings are emitted.
2023-01-25 01:13:38 +08:00
find_separate_debug_file_by_buildid (struct objfile *objfile,
std::vector<std::string> *warnings_vector)
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
{
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-08 03:49:08 +08:00
const struct bfd_build_id *build_id;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
build_id = build_id_bfd_get (objfile->obfd.get ());
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
if (build_id != NULL)
{
Introduce "set debug separate-debug-file" I helped someone figure out why their separate debug info (debug link-based) was not found by gdb. It turns out that the debug file was not named properly. It made me realize that it is quite difficult to diagnose this kind of problems. This patch adds some debug output to show where GDB looks for those files, so that it should be (more) obvious to find what's wrong. Here's an example of the result, first with an example of unsuccessful lookup, and then a successful one. (gdb) set debug separate-debug-file on (gdb) file /usr/bin/gnome-calculator Reading symbols from /usr/bin/gnome-calculator... Looking for separate debug info (build-id) for /usr/bin/gnome-calculator Trying /usr/local/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Looking for separate debug info (debug link) for /usr/bin/gnome-calculator Trying /usr/bin/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Trying /usr/bin/.debug/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Trying /usr/local/lib/debug//usr/bin/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug (no debugging symbols found)...done. (gdb) set debug-file-directory /usr/lib/debug (gdb) file /usr/bin/gnome-calculator Reading symbols from /usr/bin/gnome-calculator... Looking for separate debug info by build-id for /usr/bin/gnome-calculator Trying /usr/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Reading symbols from /usr/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug...done. done. Note: here, the debug link happens to be named like the build-id, but it doesn't have to be this way. It puzzled me for a minute. gdb/ChangeLog: * NEWS (Changes since GDB 8.0): Announce {set,show} debug separate-debug-file commands. * symfile.h (separate_debug_file_debug): New global. * symfile.c (separate_debug_file_debug): New global. (separate_debug_file_exists, find_separate_debug_file): Add debug output. (_initialize_symfile): Add "set debug separate-debug-file" command. * build-id.c (build_id_to_debug_bfd, find_separate_debug_file_by_buildid): Add debug output. gdb/doc/ChangeLog: * gdb.texinfo (Optional Messages about Internal Happenings): Document {set,show} debug separate-debug-file commands.
2017-06-12 05:16:01 +08:00
if (separate_debug_file_debug)
gdb_printf (gdb_stdlog,
_("\nLooking for separate debug info (build-id) for "
"%s\n"), objfile_name (objfile));
Introduce "set debug separate-debug-file" I helped someone figure out why their separate debug info (debug link-based) was not found by gdb. It turns out that the debug file was not named properly. It made me realize that it is quite difficult to diagnose this kind of problems. This patch adds some debug output to show where GDB looks for those files, so that it should be (more) obvious to find what's wrong. Here's an example of the result, first with an example of unsuccessful lookup, and then a successful one. (gdb) set debug separate-debug-file on (gdb) file /usr/bin/gnome-calculator Reading symbols from /usr/bin/gnome-calculator... Looking for separate debug info (build-id) for /usr/bin/gnome-calculator Trying /usr/local/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Looking for separate debug info (debug link) for /usr/bin/gnome-calculator Trying /usr/bin/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Trying /usr/bin/.debug/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Trying /usr/local/lib/debug//usr/bin/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug (no debugging symbols found)...done. (gdb) set debug-file-directory /usr/lib/debug (gdb) file /usr/bin/gnome-calculator Reading symbols from /usr/bin/gnome-calculator... Looking for separate debug info by build-id for /usr/bin/gnome-calculator Trying /usr/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug Reading symbols from /usr/lib/debug/.build-id/0d/5c5e8c86dbe4f4f95f7a13de04f91d377f3c6a.debug...done. done. Note: here, the debug link happens to be named like the build-id, but it doesn't have to be this way. It puzzled me for a minute. gdb/ChangeLog: * NEWS (Changes since GDB 8.0): Announce {set,show} debug separate-debug-file commands. * symfile.h (separate_debug_file_debug): New global. * symfile.c (separate_debug_file_debug): New global. (separate_debug_file_exists, find_separate_debug_file): Add debug output. (_initialize_symfile): Add "set debug separate-debug-file" command. * build-id.c (build_id_to_debug_bfd, find_separate_debug_file_by_buildid): Add debug output. gdb/doc/ChangeLog: * gdb.texinfo (Optional Messages about Internal Happenings): Document {set,show} debug separate-debug-file commands.
2017-06-12 05:16:01 +08:00
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
gdb_bfd_ref_ptr abfd (build_id_to_debug_bfd (build_id->size,
build_id->data));
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
/* Prevent looping on a stripped .debug file. */
if (abfd != NULL
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
&& filename_cmp (bfd_get_filename (abfd.get ()),
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
objfile_name (objfile)) == 0)
gdb: defer warnings when loading separate debug files Currently, when GDB loads debug information from a separate debug file, there are a couple of warnings that could be produced if things go wrong. In find_separate_debug_file_by_buildid (build-id.c) GDB can give a warning if the separate debug file doesn't include any actual debug information, and in separate_debug_file_exists (symfile.c) we can warn if the CRC checksum in the separate debug file doesn't match the checksum in the original executable. The problem here is that, when looking up debug information, GDB will try several different approaches, lookup by build-id, lookup by debug-link, and then a lookup from debuginfod. GDB can potentially give a warning from an earlier attempt, and then succeed with a later attempt. In the cases I have run into this is primarily a warning about some out of date debug information on my machine, but then GDB finds the correct information using debuginfod. This can be confusing to a user, they will see warnings from GDB when really everything is working just fine. For example: warning: the debug information found in "/usr/lib/debug//lib64/ld-2.32.so.debug" \ does not match "/lib64/ld-linux-x86-64.so.2" (CRC mismatch). This diagnostic was printed on Fedora 33 even when the correct debuginfo was downloaded. In this patch I propose that we defer any warnings related to looking up debug information from a separate debug file. If any of the approaches are successful then GDB will not print any of the warnings. As far as the user is concerned, everything "just worked". Only if GDB completely fails to find any suitable debug information will the warnings be printed. The crc_mismatch test compiles two executables: crc_mismatch and crc_mismatch-2 and then strips them of debuginfo creating separate debug files. The test then replaces crc_mismatch-2.debug with crc_mismatch.debug to trigger "CRC mismatch" warning. A local debuginfod server is setup to supply the correct debug file, now when GDB looks up the debug info no warning is given. The build-id-no-debug-warning.exp is similar to the previous test. It triggers the "separate debug info file has no debug info" warning by replacing the build-id based .debug file with the stripped binary and then loading it to GDB. It then also sets up local debuginfod server with the correct debug file to download to make sure no warnings are emitted.
2023-01-25 01:13:38 +08:00
{
std::string msg
= string_printf (_("\"%s\": separate debug info file has no "
"debug info"), bfd_get_filename (abfd.get ()));
if (separate_debug_file_debug)
gdb_printf (gdb_stdlog, "%s", msg.c_str ());
warnings_vector->emplace_back (std::move (msg));
}
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
else if (abfd != NULL)
return std::string (bfd_get_filename (abfd.get ()));
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
}
return std::string ();
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-09 03:56:15 +08:00
}