Contribute sh64-elf.
2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13 DJ Delorie <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12 DJ Delorie <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes. Remove
"fsina".
2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s. Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair. Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto. Find out type of contents by calling
sh64_contents_type_disasm. Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols. Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
2002-02-08 13:51:04 +08:00
|
|
|
/* Declarations for SH64 opcodes.
|
2016-01-01 19:25:12 +08:00
|
|
|
Copyright (C) 2000-2016 Free Software Foundation, Inc.
|
Contribute sh64-elf.
2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13 DJ Delorie <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12 DJ Delorie <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes. Remove
"fsina".
2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s. Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair. Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto. Find out type of contents by calling
sh64_contents_type_disasm. Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols. Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
2002-02-08 13:51:04 +08:00
|
|
|
|
2007-07-05 17:49:03 +08:00
|
|
|
This file is part of the GNU opcodes library.
|
Contribute sh64-elf.
2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13 DJ Delorie <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12 DJ Delorie <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes. Remove
"fsina".
2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s. Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair. Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto. Find out type of contents by calling
sh64_contents_type_disasm. Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols. Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
2002-02-08 13:51:04 +08:00
|
|
|
|
2007-07-05 17:49:03 +08:00
|
|
|
This library is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3, or (at your option)
|
|
|
|
any later version.
|
Contribute sh64-elf.
2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13 DJ Delorie <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12 DJ Delorie <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes. Remove
"fsina".
2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s. Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair. Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto. Find out type of contents by calling
sh64_contents_type_disasm. Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols. Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
2002-02-08 13:51:04 +08:00
|
|
|
|
2007-07-05 17:49:03 +08:00
|
|
|
It is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
|
|
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
|
|
|
License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this file; see the file COPYING. If not, write to the
|
|
|
|
Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
|
|
|
|
MA 02110-1301, USA. */
|
Contribute sh64-elf.
2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13 DJ Delorie <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12 DJ Delorie <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes. Remove
"fsina".
2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s. Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair. Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto. Find out type of contents by calling
sh64_contents_type_disasm. Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols. Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
2002-02-08 13:51:04 +08:00
|
|
|
|
|
|
|
#ifndef _SH64_OPC_INCLUDED_H
|
|
|
|
#define _SH64_OPC_INCLUDED_H
|
|
|
|
|
|
|
|
typedef enum
|
|
|
|
{
|
|
|
|
/* A placeholder. */
|
|
|
|
OFFSET_NONE = 0,
|
|
|
|
|
|
|
|
/* Bit number for where to insert operand. */
|
|
|
|
OFFSET_4 = 4,
|
|
|
|
OFFSET_9 = 9,
|
|
|
|
OFFSET_10 = 10,
|
|
|
|
OFFSET_20 = 20
|
|
|
|
} shmedia_nibble_type;
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
/* First a placeholder. */
|
|
|
|
A_NONE = 0,
|
|
|
|
|
|
|
|
/* Registers. */
|
|
|
|
A_GREG_M,
|
|
|
|
A_GREG_N,
|
|
|
|
A_GREG_D,
|
|
|
|
A_FREG_G,
|
|
|
|
A_FREG_H,
|
|
|
|
A_FREG_F,
|
|
|
|
A_DREG_G,
|
|
|
|
A_DREG_H,
|
|
|
|
A_DREG_F,
|
|
|
|
A_FVREG_G,
|
|
|
|
A_FVREG_H,
|
|
|
|
A_FVREG_F,
|
|
|
|
A_FMREG_G,
|
|
|
|
A_FMREG_H,
|
|
|
|
A_FMREG_F,
|
|
|
|
A_FPREG_G,
|
|
|
|
A_FPREG_H,
|
|
|
|
A_FPREG_F,
|
|
|
|
A_TREG_A,
|
|
|
|
A_TREG_B,
|
|
|
|
A_CREG_K,
|
|
|
|
A_CREG_J,
|
|
|
|
|
|
|
|
/* This one is only used in a shmedia_get_operand. */
|
|
|
|
A_IMMM,
|
|
|
|
|
|
|
|
/* Copy of previous register. */
|
|
|
|
A_REUSE_PREV,
|
|
|
|
|
|
|
|
/* Unsigned 5-bit operand. */
|
|
|
|
A_IMMU5,
|
|
|
|
|
|
|
|
/* Signed 6-bit operand. */
|
|
|
|
A_IMMS6,
|
|
|
|
|
|
|
|
/* Signed operand, 6 bits << 5. */
|
|
|
|
A_IMMS6BY32,
|
|
|
|
|
|
|
|
/* Unsigned 6-bit operand. */
|
|
|
|
A_IMMU6,
|
|
|
|
|
|
|
|
/* Signed 10-bit operand. */
|
|
|
|
A_IMMS10,
|
|
|
|
|
|
|
|
/* Signed operand, 10 bits << 0. */
|
|
|
|
A_IMMS10BY1,
|
|
|
|
|
|
|
|
/* Signed operand, 10 bits << 1. */
|
|
|
|
A_IMMS10BY2,
|
|
|
|
|
|
|
|
/* Signed operand, 10 bits << 2. */
|
|
|
|
A_IMMS10BY4,
|
|
|
|
|
|
|
|
/* Signed operand, 10 bits << 3. */
|
|
|
|
A_IMMS10BY8,
|
|
|
|
|
|
|
|
/* Signed 16-bit operand. */
|
|
|
|
A_IMMS16,
|
|
|
|
|
|
|
|
/* Unsigned 16-bit operand. */
|
|
|
|
A_IMMU16,
|
|
|
|
|
|
|
|
/* PC-relative signed operand, 16 bits << 2, for PTA and PTB insns. */
|
|
|
|
A_PCIMMS16BY4,
|
|
|
|
|
|
|
|
/* PC relative signed operand, 16 bits << 2, for PT insns. Also adjusts
|
|
|
|
the opcode to be PTA or PTB. */
|
|
|
|
A_PCIMMS16BY4_PT,
|
|
|
|
} shmedia_arg_type;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
char *name;
|
|
|
|
shmedia_arg_type arg[4];
|
|
|
|
shmedia_nibble_type nibbles[4];
|
|
|
|
unsigned long opcode_base;
|
|
|
|
} shmedia_opcode_info;
|
|
|
|
|
|
|
|
extern const shmedia_opcode_info shmedia_table[];
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
int cregno;
|
|
|
|
char *name;
|
|
|
|
} shmedia_creg_info;
|
|
|
|
|
|
|
|
extern const shmedia_creg_info shmedia_creg_table[];
|
|
|
|
|
|
|
|
#define SHMEDIA_LIKELY_BIT 0x00000200
|
|
|
|
#define SHMEDIA_PT_OPC 0xe8000000
|
|
|
|
#define SHMEDIA_PTB_BIT 0x04000000
|
|
|
|
#define SHMEDIA_PTA_OPC 0xe8000000
|
|
|
|
#define SHMEDIA_PTB_OPC 0xec000000
|
|
|
|
|
|
|
|
/* Note that this is ptrel/u. "Or" in SHMEDIA_LIKELY_BIT for ptrel/l. */
|
|
|
|
#define SHMEDIA_PTREL_OPC 0x6bf50000
|
|
|
|
#define SHMEDIA_MOVI_OPC 0xcc000000
|
|
|
|
#define SHMEDIA_SHORI_OPC 0xc8000000
|
|
|
|
#define SHMEDIA_ADDI_OPC 0xd0000000
|
|
|
|
#define SHMEDIA_ADD_OPC 0x00090000
|
|
|
|
#define SHMEDIA_NOP_OPC 0x6ff0fff0
|
|
|
|
#define SHMEDIA_TEMP_REG 25
|
|
|
|
|
|
|
|
#endif /* _SH64_OPC_INCLUDED_H */
|