binutils-gdb/gdbserver/gdbreplay.cc

533 lines
11 KiB
C++
Raw Normal View History

/* Replay a remote debug session logfile for GDB.
Copyright (C) 1996-2020 Free Software Foundation, Inc.
Written by Fred Fish (fnf@cygnus.com) from pieces of gdbserver.
1999-07-08 04:19:36 +08:00
This file is part of GDB.
1999-07-08 04:19:36 +08:00
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
1999-07-08 04:19:36 +08:00
(at your option) any later version.
1999-07-08 04:19:36 +08:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
1999-07-08 04:19:36 +08:00
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
#include "gdbsupport/common-defs.h"
Move gdbsupport to the top level This patch moves the gdbsupport directory to the top level. This is the next step in the ongoing project to move gdbserver to the top level. The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport". This patch then adds a build system to gdbsupport and wires it into the top level. Then it changes gdb to use the top-level build. gdbserver, on the other hand, is not yet changed. It still does its own build of gdbsupport. ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport. * MAINTAINERS: Add gdbsupport. * configure: Rebuild. * configure.ac (configdirs): Add gdbsupport. * gdbsupport: New directory, move from gdb/gdbsupport. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * nat/x86-linux-dregs.c: Include configh.h. * nat/linux-ptrace.c: Include configh.h. * nat/linux-btrace.c: Include configh.h. * defs.h: Include config.h, bfd.h. * configure.ac: Don't source common.host. (CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files. * configure: Rebuild. * acinclude.m4: Update path. * Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables. (CONFIG_SRC_SUBDIR): Remove gdbsupport. (INTERNAL_CFLAGS_BASE): Add INCSUPPORT. (CLIBS): Add LIBSUPPORT. (CDEPS): Likewise. (COMMON_SFILES): Remove gdbsupport files. (HFILES_NO_SRCDIR): Likewise. (stamp-version): Update path to create-version.sh. (ALLDEPFILES): Remove gdbsupport files. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * server.h: Include config.h. * gdbreplay.c: Include config.h. * configure: Rebuild. * configure.ac: Don't source common.host. * acinclude.m4: Update path. * Makefile.in (INCSUPPORT): New variable. (INCLUDE_CFLAGS): Add INCSUPPORT. (SFILES): Update paths. (version-generated.c): Update path to create-version.sh. (gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * common-defs.h: Add GDBSERVER case. Update includes. * acinclude.m4, aclocal.m4, config.in, configure, configure.ac, Makefile.am, Makefile.in, README: New files. * Moved from ../gdb/gdbsupport/ Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
#undef PACKAGE
#undef PACKAGE_NAME
#undef PACKAGE_VERSION
#undef PACKAGE_STRING
#undef PACKAGE_TARNAME
#include <config.h>
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
#include "gdbsupport/version.h"
gdb/ * arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate.
2007-03-29 09:06:48 +08:00
#if HAVE_SYS_FILE_H
#include <sys/file.h>
gdb/ * arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate.
2007-03-29 09:06:48 +08:00
#endif
#if HAVE_SIGNAL_H
#include <signal.h>
gdb/ * arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate.
2007-03-29 09:06:48 +08:00
#endif
#include <ctype.h>
gdb/ * arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate.
2007-03-29 09:06:48 +08:00
#if HAVE_FCNTL_H
#include <fcntl.h>
gdb/ * arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate.
2007-03-29 09:06:48 +08:00
#endif
#include <unistd.h>
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#if HAVE_NETDB_H
#include <netdb.h>
#endif
#if HAVE_NETINET_TCP_H
#include <netinet/tcp.h>
#endif
#if USE_WIN32API
#include <ws2tcpip.h>
#endif
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
#include "gdbsupport/netstuff.h"
#include "gdbsupport/rsp-low.h"
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
* acconfig.h: Remove. * configure.ac: Add a test for socklen_t. Use three-argument AC_DEFINE throughout. * config.in: Regenerated using autoheader 2.59. * configure: Regenerated. * gdbreplay.c (socklen_t): Provide a default. (remote_open): Use socklen_t. * remote-utils.c (socklen_t): Provide a default. (remote_open): Use socklen_t. (convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use unsigned char. * i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned char for buffers. * linux-low.c (linux_read_memory, linux_write_memory) (linux_read_auxv): Likewise. * mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read) (check_mem_write): Likewise. * mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write): Likewise. * regcache.c (struct inferior_rgcache_data, registers_to_string) (registers_from_string, register_data): Likewise. * server.c (handle_query, main): Likewise. * server.h (convert_ascii_to_int, convert_int_to_ascii) (decode_M_packet): Likewise. * target.c (read_inferior_memory, write_inferior_memory): Likewise. * target.h (struct target_ops): Update read_memory, write_memory, and read_auxv. (read_inferior_memory, write_inferior_memory): Update. * linux-low.h (struct linux_target_ops): Change type of breakpoint to unsigned char *. * linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c, linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c, linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c, linux-s390-low.c, linux-sh-low.c: Update for changes in read_inferior_memory and the_low_target->breakpoint.
2005-06-13 09:59:22 +08:00
#ifndef HAVE_SOCKLEN_T
typedef int socklen_t;
#endif
/* Sort of a hack... */
#define EOL (EOF - 1)
static int remote_desc;
gdb/ * arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate.
2007-03-29 09:06:48 +08:00
#ifdef __MINGW32CE__
#ifndef COUNTOF
#define COUNTOF(STR) (sizeof (STR) / sizeof ((STR)[0]))
#endif
#define errno (GetLastError ())
char *
strerror (DWORD error)
{
static char buf[1024];
WCHAR *msgbuf;
DWORD lasterr = GetLastError ();
DWORD chars = FormatMessageW (FORMAT_MESSAGE_FROM_SYSTEM
| FORMAT_MESSAGE_ALLOCATE_BUFFER,
NULL,
error,
0, /* Default language */
(LPVOID)&msgbuf,
0,
NULL);
if (chars != 0)
{
/* If there is an \r\n appended, zap it. */
if (chars >= 2
&& msgbuf[chars - 2] == '\r'
&& msgbuf[chars - 1] == '\n')
{
chars -= 2;
msgbuf[chars] = 0;
}
if (chars > ((COUNTOF (buf)) - 1))
{
chars = COUNTOF (buf) - 1;
msgbuf [chars] = 0;
}
wcstombs (buf, msgbuf, chars + 1);
LocalFree (msgbuf);
}
else
sprintf (buf, "unknown win32 error (%ld)", error);
SetLastError (lasterr);
return buf;
}
#endif /* __MINGW32CE__ */
static void
-Wwrite-strings: The Rest This is the remainder boring constification that all looks more of less borderline obvious IMO. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * ada-exp.y (yyerror): Constify. * ada-lang.c (bound_name, get_selections) (ada_variant_discrim_type) (ada_variant_discrim_name, ada_value_struct_elt) (ada_lookup_struct_elt_type, is_unchecked_variant) (ada_which_variant_applies, standard_exc, ada_get_next_arg) (catch_ada_exception_command_split) (catch_ada_assert_command_split, catch_assert_command) (ada_op_name): Constify. * ada-lang.h (ada_yyerror, get_selections) (ada_variant_discrim_name, ada_value_struct_elt): Constify. * arc-tdep.c (arc_print_frame_cache): Constify. * arm-tdep.c (arm_skip_stub): Constify. * ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref) (gen_aggregate_elt_ref): Constify. * bcache.c (print_bcache_statistics): Constify. * bcache.h (print_bcache_statistics): Constify. * break-catch-throw.c (catch_exception_command_1): * breakpoint.c (struct ep_type_description::description): Constify. (add_solib_catchpoint): Constify. (catch_fork_command_1): Add cast. (add_catch_command): Constify. * breakpoint.h (add_catch_command, add_solib_catchpoint): Constify. * bsd-uthread.c (bsd_uthread_state): Constify. * buildsym.c (patch_subfile_names): Constify. * buildsym.h (next_symbol_text_func, patch_subfile_names): Constify. * c-exp.y (yyerror): Constify. (token::oper): Constify. * c-lang.h (c_yyerror, cp_print_class_member): Constify. * c-varobj.c (cplus_describe_child): Constify. * charset.c (find_charset_names): Add cast. (find_charset_names): Constify array and add const_cast. * cli/cli-cmds.c (complete_command, cd_command): Constify. (edit_command): Constify. * cli/cli-decode.c (lookup_cmd): Constify. * cli/cli-dump.c (dump_memory_command, dump_value_command): Constify. (struct dump_context): Constify. (add_dump_command, restore_command): Constify. * cli/cli-script.c (get_command_line): Constify. * cli/cli-script.h (get_command_line): Constify. * cli/cli-utils.c (check_for_argument): Constify. * cli/cli-utils.h (check_for_argument): Constify. * coff-pe-read.c (struct read_pe_section_data): Constify. * command.h (lookup_cmd): Constify. * common/print-utils.c (decimal2str): Constify. * completer.c (gdb_print_filename): Constify. * corefile.c (set_gnutarget): Constify. * cp-name-parser.y (yyerror): Constify. * cp-valprint.c (cp_print_class_member): Constify. * cris-tdep.c (cris_register_name, crisv32_register_name): Constify. * d-exp.y (yyerror): Constify. (struct token::oper): Constify. * d-lang.h (d_yyerror): Constify. * dbxread.c (struct header_file_location::name): Constify. (add_old_header_file, add_new_header_file, last_function_name) (dbx_next_symbol_text, add_bincl_to_list) (find_corresponding_bincl_psymtab, set_namestring) (find_stab_function_addr, read_dbx_symtab, start_psymtab) (dbx_end_psymtab, read_ofile_symtab, process_one_symbol): * defs.h (command_line_input, print_address_symbolic) (deprecated_readline_begin_hook): Constify. * dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name): Constify. * event-top.c (handle_line_of_input): Constify and add cast. * exceptions.c (catch_errors): Constify. * exceptions.h (catch_errors): Constify. * expprint.c (print_subexp_standard, op_string, op_name) (op_name_standard, dump_raw_expression, dump_raw_expression): * expression.h (op_name, op_string, dump_raw_expression): Constify. * f-exp.y (yyerror): Constify. (struct token::oper): Constify. (struct f77_boolean_val::name): Constify. * f-lang.c (f_word_break_characters): Constify. * f-lang.h (f_yyerror): Constify. * fork-child.c (fork_inferior): Add cast. * frv-tdep.c (struct gdbarch_tdep::register_names): Constify. (new_variant): Constify. * gdbarch.sh (pstring_ptr, pstring_list): Constify. * gdbarch.c: Regenerate. * gdbcore.h (set_gnutarget): Constify. * go-exp.y (yyerror): Constify. (token::oper): Constify. * go-lang.h (go_yyerror): Constify. * go32-nat.c (go32_sysinfo): Constify. * guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * guile/scm-param.c (pascm_param_value): Constify. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Constify. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Constify. * ia64-tdep.c (ia64_register_names): Constify. * infcmd.c (construct_inferior_arguments): Constify. (path_command, attach_post_wait): Constify. * language.c (show_range_command, show_case_command) (unk_lang_error): Constify. * language.h (language_defn::la_error) (language_defn::la_name_of_this): Constify. * linespec.c (decode_line_2): Constify. * linux-thread-db.c (thread_db_err_str): Constify. * lm32-tdep.c (lm32_register_name): Constify. * m2-exp.y (yyerror): Constify. * m2-lang.h (m2_yyerror): Constify. * m32r-tdep.c (m32r_register_names): Constify and make static. * m68hc11-tdep.c (m68hc11_register_names): Constify. * m88k-tdep.c (m88k_register_name): Constify. * macroexp.c (appendmem): Constify. * mdebugread.c (fdr_name, add_data_symbol, parse_type) (upgrade_type, parse_external, parse_partial_symbols) (mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab) (new_symbol): Constify. * memattr.c (mem_info_command): Constify. * mep-tdep.c (register_name_from_keyword): Constify. * mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env): Constify. * mi/mi-cmd-stack.c (list_args_or_locals): Constify. * mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify. * mi/mi-main.c (captured_mi_execute_command): Constify and add cast. (mi_execute_async_cli_command): Constify. * mips-tdep.c (mips_register_name): Constify. * mn10300-tdep.c (register_name, mn10300_generic_register_name) (am33_register_name, am33_2_register_name) * moxie-tdep.c (moxie_register_names): Constify. * nat/linux-osdata.c (osdata_type): Constify fields. * nto-tdep.c (nto_parse_redirection): Constify. * objc-lang.c (lookup_struct_typedef, lookup_objc_class) (lookup_child_selector): Constify. (objc_methcall::name): Constify. * objc-lang.h (lookup_objc_class, lookup_child_selector) (lookup_struct_typedef): Constify. * objfiles.c (pc_in_section): Constify. * objfiles.h (pc_in_section): Constify. * p-exp.y (struct token::oper): Constify. (yyerror): Constify. * p-lang.h (pascal_yyerror): Constify. * parser-defs.h (op_name_standard): Constify. (op_print::string): Constify. (exp_descriptor::op_name): Constify. * printcmd.c (print_address_symbolic): Constify. * psymtab.c (print_partial_symbols): Constify. * python/py-breakpoint.c (stop_func): Constify. (bppy_get_expression): Constify. * python/py-cmd.c (cmdpy_completer::name): Constify. (cmdpy_function): Constify. * python/py-event.c (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-event.h (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-evts.c (add_new_registry): Constify. * python/py-finishbreakpoint.c (outofscope_func): Constify. * python/py-framefilter.c (get_py_iter_from_func): Constify. * python/py-inferior.c (get_buffer): Add cast. * python/py-param.c (parm_constant::name): Constify. * python/py-unwind.c (fprint_frame_id): Constify. * python/python.c (gdbpy_parameter_value): Constify. * remote-fileio.c (remote_fio_func_map): Make 'name' const. * remote.c (memory_packet_config::name): Constify. (show_packet_config_cmd, remote_write_bytes) (remote_buffer_add_string): * reverse.c (exec_reverse_once): Constify. * rs6000-tdep.c (variant::name, variant::description): Constify. * rust-exp.y (rustyyerror): Constify. * rust-lang.c (rust_op_name): Constify. * rust-lang.h (rustyyerror): Constify. * serial.h (serial_ops::name): Constify. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name) (sh_sh2a_register_name, sh_sh2a_nofpu_register_name) (sh_sh_dsp_register_name, sh_sh3_dsp_register_name) (sh_sh4_register_name, sh_sh4_nofpu_register_name) (sh_sh4al_dsp_register_name): Constify. * sh64-tdep.c (sh64_register_name): Constify. * solib-darwin.c (lookup_symbol_from_bfd): Constify. * spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify. * stabsread.c (patch_block_stabs, read_type_number) (ref_map::stabs, ref_add, process_reference) (symbol_reference_defined, define_symbol, define_symbol) (error_type, read_type, read_member_functions, read_cpp_abbrev) (read_one_struct_field, read_struct_fields, read_baseclasses) (read_tilde_fields, read_struct_type, read_array_type) (read_enum_type, read_sun_builtin_type, read_sun_floating_type) (read_huge_number, read_range_type, read_args, common_block_start) (find_name_end): Constify. * stabsread.h (common_block_start, define_symbol) (process_one_symbol, symbol_reference_defined, ref_add): * symfile.c (get_section_index, add_symbol_file_command): * symfile.h (get_section_index): Constify. * target-descriptions.c (tdesc_type::name): Constify. (tdesc_free_type): Add cast. * target.c (find_default_run_target): (add_deprecated_target_alias, find_default_run_target) (target_announce_detach): Constify. (do_option): Constify. * target.h (add_deprecated_target_alias): Constify. * thread.c (print_thread_info_1): Constify. * top.c (deprecated_readline_begin_hook, command_line_input): Constify. (init_main): Add casts. * top.h (handle_line_of_input): Constify. * tracefile-tfile.c (tfile_write_uploaded_tsv): Constify. * tracepoint.c (tvariables_info_1, trace_status_mi): Constify. (tfind_command): Rename to ... (tfind_command_1): ... this and constify. (tfind_command): New function. (tfind_end_command, tfind_start_command): Adjust. (encode_source_string): Constify. * tracepoint.h (encode_source_string): Constify. * tui/tui-data.c (tui_partial_win_by_name): Constify. * tui/tui-data.h (tui_partial_win_by_name): Constify. * tui/tui-source.c (tui_set_source_content_nil): Constify. * tui/tui-source.h (tui_set_source_content_nil): Constify. * tui/tui-win.c (parse_scrolling_args): Constify. * tui/tui-windata.c (tui_erase_data_content): Constify. * tui/tui-windata.h (tui_erase_data_content): Constify. * tui/tui-winsource.c (tui_erase_source_content): Constify. * tui/tui.c (tui_enable): Add cast. * utils.c (defaulted_query): Constify. (init_page_info): Add cast. (puts_debug, subset_compare): Constify. * utils.h (subset_compare): Constify. * varobj.c (varobj_format_string): Constify. * varobj.h (varobj_format_string): Constify. * vax-tdep.c (vax_register_name): Constify. * windows-nat.c (windows_detach): Constify. * xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify. * xml-support.c (gdb_xml_end_element): Constify. * xml-tdesc.c (tdesc_start_reg): Constify. * xstormy16-tdep.c (xstormy16_register_name): Constify. * xtensa-tdep.c (xtensa_find_register_by_name): Constify. * xtensa-tdep.h (xtensa_register_t::name): Constify. gdb/gdbserver/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * gdbreplay.c (sync_error): Constify. * linux-x86-low.c (push_opcode): Constify.
2017-04-06 02:21:37 +08:00
sync_error (FILE *fp, const char *desc, int expect, int got)
{
fprintf (stderr, "\n%s\n", desc);
fprintf (stderr, "At logfile offset %ld, expected '0x%x' got '0x%x'\n",
ftell (fp), expect, got);
fflush (stderr);
exit (1);
}
static void
remote_error (const char *desc)
{
fprintf (stderr, "\n%s\n", desc);
fflush (stderr);
exit (1);
}
static void
2000-07-30 09:48:28 +08:00
remote_close (void)
{
#ifdef USE_WIN32API
closesocket (remote_desc);
#else
close (remote_desc);
#endif
}
/* Open a connection to a remote debugger.
NAME is the filename used for communication. */
static void
2000-07-30 09:48:28 +08:00
remote_open (char *name)
{
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
char *last_colon = strrchr (name, ':');
if (last_colon == NULL)
{
fprintf (stderr, "%s: Must specify tcp connection as host:addr\n", name);
fflush (stderr);
exit (1);
}
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
#ifdef USE_WIN32API
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
static int winsock_initialized;
#endif
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
int tmp;
int tmp_desc;
struct addrinfo hint;
struct addrinfo *ainfo;
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
memset (&hint, 0, sizeof (hint));
/* Assume no prefix will be passed, therefore we should use
AF_UNSPEC. */
hint.ai_family = AF_UNSPEC;
hint.ai_socktype = SOCK_STREAM;
hint.ai_protocol = IPPROTO_TCP;
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
parsed_connection_spec parsed = parse_connection_spec (name, &hint);
if (parsed.port_str.empty ())
error (_("Missing port on hostname '%s'"), name);
#ifdef USE_WIN32API
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
if (!winsock_initialized)
{
WSADATA wsad;
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
WSAStartup (MAKEWORD (1, 0), &wsad);
winsock_initialized = 1;
}
#endif
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
int r = getaddrinfo (parsed.host_str.c_str (), parsed.port_str.c_str (),
&hint, &ainfo);
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
if (r != 0)
{
fprintf (stderr, "%s:%s: cannot resolve name: %s\n",
parsed.host_str.c_str (), parsed.port_str.c_str (),
gai_strerror (r));
fflush (stderr);
exit (1);
}
scoped_free_addrinfo free_ainfo (ainfo);
struct addrinfo *p;
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
for (p = ainfo; p != NULL; p = p->ai_next)
{
tmp_desc = socket (p->ai_family, p->ai_socktype, p->ai_protocol);
if (tmp_desc >= 0)
break;
}
if (p == NULL)
perror_with_name ("Cannot open socket");
/* Allow rapid reuse of this port. */
tmp = 1;
setsockopt (tmp_desc, SOL_SOCKET, SO_REUSEADDR, (char *) &tmp,
sizeof (tmp));
switch (p->ai_family)
{
case AF_INET:
((struct sockaddr_in *) p->ai_addr)->sin_addr.s_addr = INADDR_ANY;
break;
case AF_INET6:
((struct sockaddr_in6 *) p->ai_addr)->sin6_addr = in6addr_any;
break;
default:
fprintf (stderr, "Invalid 'ai_family' %d\n", p->ai_family);
exit (1);
}
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
if (bind (tmp_desc, p->ai_addr, p->ai_addrlen) != 0)
perror_with_name ("Can't bind address");
if (p->ai_socktype == SOCK_DGRAM)
remote_desc = tmp_desc;
else
{
struct sockaddr_storage sockaddr;
socklen_t sockaddrsize = sizeof (sockaddr);
char orig_host[GDB_NI_MAX_ADDR], orig_port[GDB_NI_MAX_PORT];
if (listen (tmp_desc, 1) != 0)
perror_with_name ("Can't listen on socket");
remote_desc = accept (tmp_desc, (struct sockaddr *) &sockaddr,
&sockaddrsize);
if (remote_desc == -1)
perror_with_name ("Accept failed");
/* Enable TCP keep alive process. */
tmp = 1;
setsockopt (tmp_desc, SOL_SOCKET, SO_KEEPALIVE,
(char *) &tmp, sizeof (tmp));
/* Tell TCP not to delay small packets. This greatly speeds up
interactive response. */
tmp = 1;
setsockopt (remote_desc, IPPROTO_TCP, TCP_NODELAY,
1999-07-08 04:19:36 +08:00
(char *) &tmp, sizeof (tmp));
Implement IPv6 support for GDB/gdbserver This patch implements IPv6 support for both GDB and gdbserver. Based on my research, it is the fourth attempt to do that since 2006. Since I used ideas from all of the previous patches, I also added their authors's names on the ChangeLogs as a way to recognize their efforts. For reference sake, you can find the previous attempts at: https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html The basic idea behind the patch is to start using the new 'getaddrinfo'/'getnameinfo' calls, which are responsible for translating names and addresses in a protocol-independent way. This means that if we ever have a new version of the IP protocol, we won't need to change the code again (or, at least, won't have to change the majority of the code). The function 'getaddrinfo' returns a linked list of possible addresses to connect to. Dealing with multiple addresses proved to be a hard task with the current TCP auto-retry mechanism implemented on ser-tcp:net_open. For example, when gdbserver listened only on an IPv4 socket: $ ./gdbserver --once 127.0.0.1:1234 ./a.out and GDB was instructed to try to connect to both IPv6 and IPv4 sockets: $ ./gdb -ex 'target extended-remote localhost:1234' ./a.out the user would notice a somewhat big delay before GDB was able to connect to the IPv4 socket. This happened because GDB was trying to connect to the IPv6 socket first, and had to wait until the connection timed out before it tried to connect to the IPv4 socket. For that reason, I had to rewrite the main loop and implement a new method for handling multiple connections. After some discussion, Pedro and I agreed on the following algorithm: 1) For each entry returned by 'getaddrinfo', we try to open a socket and connect to it. 2.a) If we have a successful 'connect', we just use that connection. 2.b) If we don't have a successfull 'connect', but if we've got a ECONNREFUSED (meaning the the connection was refused), we keep track of this fact by using a flag. 2.c) If we don't have a successfull 'connect', but if we've got a EINPROGRESS (meaning that the connection is in progress), we perform a 'select' call on the socket until we have a result (either a successful connection, or an error on the socket). 3) If tcp_auto_retry is true, and we haven't gotten a successful connection, and at least one of our attempts failed with ECONNREFUSED, then we wait a little bit (i.e., call 'wait_for_connect'), check to see if there was a timeout/interruption (in which case we bail out), and then go back to (1). After multiple tests, I was able to connect without delay on the scenario described above, and was also able to connect in all other types of scenarios. I also implemented some hostname parsing functions (along with their corresponding unit tests) which are used to help GDB and gdbserver to parse hostname strings provided by the user. These new functions are living inside common/netstuff.[ch]. I've had to do that since IPv6 introduces a new URL scheme, which defines that square brackets can be used to enclose the host part and differentiate it from the port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some time thinking about a reasonable way to interpret what the user wants, and I came up with the following: - If the user has provided a prefix that doesn't specify the protocol version (i.e., "tcp:" or "udp:"), or if the user has not provided any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when dealing with 'getaddrinfo') *unless* the host starts with "[" (in which case, assume it's an IPv6 host). - If the user has provided a prefix that does specify the protocol version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect that. This method doesn't follow strictly what RFC 2732 proposes (that literal IPv6 addresses should be provided enclosed in "[" and "]") because IPv6 addresses still can be provided without square brackets in our case, but since we have prefixes to specify protocol versions I think this is not an issue. Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST' testcase parameter, which makes it possible to specify the hostname (without the port) to be used when testing GDB and gdbserver. For example, to run IPv6 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]' Or, to run IPv4 tests: $ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1' This required a few changes on the gdbserver-base.exp, and also a minimal adjustment on gdb.server/run-without-local-binary.exp. Finally, I've implemented a new testcase, gdb.server/server-connect.exp, which is supposed to run on the native host and perform various "smoke tests" using different connection methods. This patch has been regression-tested on BuildBot and locally, and also built using a x86_64-w64-mingw32 GCC, and no problems were found. gdb/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add 'unittests/parse-connection-spec-selftests.c'. (COMMON_SFILES): Add 'common/netstuff.c'. (HFILES_NO_SRCDIR): Add 'common/netstuff.h'. * NEWS (Changes since GDB 8.2): Mention IPv6 support. * common/netstuff.c: New file. * common/netstuff.h: New file. * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'. (wait_for_connect): Update comment. New parameter 'gdb::optional<int> sock' instead of 'struct serial *scb'. Use 'sock' directly instead of 'scb->fd'. (try_connect): New function, with code from 'net_open'. (net_open): Rewrite main loop to deal with multiple sockets/addresses. Handle IPv6-style hostnames; implement support for IPv6 connections. * unittests/parse-connection-spec-selftests.c: New file. gdb/gdbserver/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'. (OBS): Add 'common/netstuff.o'. (GDBREPLAY_OBS): Likewise. * gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'. (remote_open): Implement support for IPv6 connections. * remote-utils.c: Include 'netstuff.h', 'filestuff.h' and 'wspiapi.h'. (handle_accept_event): Accept connections from IPv6 sources. (remote_prepare): Handle IPv6-style hostnames; implement support for IPv6 connections. (remote_open): Implement support for printing connections from IPv6 sources. gdb/testsuite/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST' parameter. * boards/native-extended-gdbserver.exp: Do not set 'sockethost' by default. * boards/native-gdbserver.exp: Likewise. * gdb.server/run-without-local-binary.exp: Improve regexp used for detecting when a remote debugging connection succeeds. * gdb.server/server-connect.exp: New file. * lib/gdbserver-support.exp (gdbserver_default_get_comm_port): Do not prefix the port number with ":". (gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement support for detecting and using it. Add '$debughost_gdbserver' to the list of arguments used to start gdbserver. Handle case when gdbserver cannot resolve a network name. gdb/doc/ChangeLog: 2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Paul Fertser <fercerpav@gmail.com> Tsutomu Seki <sekiriki@gmail.com> * gdb.texinfo (Remote Connection Commands): Add explanation about new IPv6 support. Add new connection prefixes.
2018-05-18 13:29:24 +08:00
if (getnameinfo ((struct sockaddr *) &sockaddr, sockaddrsize,
orig_host, sizeof (orig_host),
orig_port, sizeof (orig_port),
NI_NUMERICHOST | NI_NUMERICSERV) == 0)
{
fprintf (stderr, "Remote debugging from host %s, port %s\n",
orig_host, orig_port);
fflush (stderr);
}
#ifndef USE_WIN32API
close (tmp_desc); /* No longer need this */
signal (SIGPIPE, SIG_IGN); /* If we don't do this, then
gdbreplay simply exits when
the remote side dies. */
#else
closesocket (tmp_desc); /* No longer need this */
#endif
}
#if defined(F_SETFL) && defined (FASYNC)
fcntl (remote_desc, F_SETFL, FASYNC);
#endif
fprintf (stderr, "Replay logfile using %s\n", name);
fflush (stderr);
}
static int
2000-07-30 09:48:28 +08:00
logchar (FILE *fp)
{
int ch;
int ch2;
ch = fgetc (fp);
if (ch != '\r')
{
fputc (ch, stdout);
fflush (stdout);
}
switch (ch)
{
/* Treat \r\n as a newline. */
case '\r':
ch = fgetc (fp);
if (ch == '\n')
ch = EOL;
else
{
ungetc (ch, fp);
ch = '\r';
}
fputc (ch == EOL ? '\n' : '\r', stdout);
fflush (stdout);
break;
case '\n':
ch = EOL;
break;
case '\\':
ch = fgetc (fp);
fputc (ch, stdout);
fflush (stdout);
switch (ch)
{
1999-07-08 04:19:36 +08:00
case '\\':
break;
case 'b':
ch = '\b';
break;
case 'f':
ch = '\f';
break;
case 'n':
ch = '\n';
break;
case 'r':
ch = '\r';
break;
case 't':
ch = '\t';
break;
case 'v':
ch = '\v';
break;
case 'x':
ch2 = fgetc (fp);
fputc (ch2, stdout);
fflush (stdout);
ch = fromhex (ch2) << 4;
ch2 = fgetc (fp);
fputc (ch2, stdout);
fflush (stdout);
ch |= fromhex (ch2);
break;
default:
/* Treat any other char as just itself */
break;
}
default:
break;
}
return (ch);
}
static int
gdbchar (int desc)
{
unsigned char fromgdb;
if (read (desc, &fromgdb, 1) != 1)
return -1;
else
return fromgdb;
}
/* Accept input from gdb and match with chars from fp (after skipping one
blank) up until a \n is read from fp (which is not matched) */
static void
2000-07-30 09:48:28 +08:00
expect (FILE *fp)
{
int fromlog;
int fromgdb;
if ((fromlog = logchar (fp)) != ' ')
{
sync_error (fp, "Sync error during gdb read of leading blank", ' ',
fromlog);
}
do
{
fromlog = logchar (fp);
if (fromlog == EOL)
break;
fromgdb = gdbchar (remote_desc);
if (fromgdb < 0)
remote_error ("Error during read from gdb");
1999-07-08 04:19:36 +08:00
}
while (fromlog == fromgdb);
if (fromlog != EOL)
{
sync_error (fp, "Sync error during read of gdb packet from log", fromlog,
fromgdb);
}
}
/* Play data back to gdb from fp (after skipping leading blank) up until a
\n is read from fp (which is discarded and not sent to gdb). */
static void
2000-07-30 09:48:28 +08:00
play (FILE *fp)
{
int fromlog;
char ch;
if ((fromlog = logchar (fp)) != ' ')
{
sync_error (fp, "Sync error skipping blank during write to gdb", ' ',
fromlog);
}
while ((fromlog = logchar (fp)) != EOL)
{
ch = fromlog;
if (write (remote_desc, &ch, 1) != 1)
remote_error ("Error during write to gdb");
}
}
2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * main.c (print_gdb_help): Use REPORT_BUGS_TO for bug-reporting address. * top.c (print_gdb_version): Use PKGVERSION and REPORT_BUGS_TO. doc: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Include ../../config/acx.m4. Use ACX_PKGVERSION and ACX_BUGURL. * configure: Regenerate. * Makefile.in (PKGVERSION, BUGURL_TEXI): Define. (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT. * gdb.texinfo: Use VERSION_PACKAGE and BUGURL. Remove mailing-list-specific text about bug reporting unless BUGURL_DEFAULT. gdbserver: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Makefile.in (gdbreplay$(EXEEXT)): Add version.o. * server.c (gdbserver_version): Print PKGVERSION. (gdbsrever_usage): Add stream parameter. Print REPORT_BUGS_TO. (main): Adjust gdbserver_usage calls. * gdbreplay.c (version, host_name): Add declarations. (gdbreplay_version, gdbreplay_usage): New. (main): Accept --version and --help options.
2008-06-06 06:36:57 +08:00
static void
gdbreplay_version (void)
{
printf ("GNU gdbreplay %s%s\n"
"Copyright (C) 2020 Free Software Foundation, Inc.\n"
"gdbreplay is free software, covered by "
"the GNU General Public License.\n"
"This gdbreplay was configured as \"%s\"\n",
2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * main.c (print_gdb_help): Use REPORT_BUGS_TO for bug-reporting address. * top.c (print_gdb_version): Use PKGVERSION and REPORT_BUGS_TO. doc: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Include ../../config/acx.m4. Use ACX_PKGVERSION and ACX_BUGURL. * configure: Regenerate. * Makefile.in (PKGVERSION, BUGURL_TEXI): Define. (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT. * gdb.texinfo: Use VERSION_PACKAGE and BUGURL. Remove mailing-list-specific text about bug reporting unless BUGURL_DEFAULT. gdbserver: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Makefile.in (gdbreplay$(EXEEXT)): Add version.o. * server.c (gdbserver_version): Print PKGVERSION. (gdbsrever_usage): Add stream parameter. Print REPORT_BUGS_TO. (main): Adjust gdbserver_usage calls. * gdbreplay.c (version, host_name): Add declarations. (gdbreplay_version, gdbreplay_usage): New. (main): Accept --version and --help options.
2008-06-06 06:36:57 +08:00
PKGVERSION, version, host_name);
}
static void
gdbreplay_usage (FILE *stream)
{
fprintf (stream, "Usage:\tgdbreplay LOGFILE HOST:PORT\n");
2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * main.c (print_gdb_help): Use REPORT_BUGS_TO for bug-reporting address. * top.c (print_gdb_version): Use PKGVERSION and REPORT_BUGS_TO. doc: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Include ../../config/acx.m4. Use ACX_PKGVERSION and ACX_BUGURL. * configure: Regenerate. * Makefile.in (PKGVERSION, BUGURL_TEXI): Define. (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT. * gdb.texinfo: Use VERSION_PACKAGE and BUGURL. Remove mailing-list-specific text about bug reporting unless BUGURL_DEFAULT. gdbserver: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Makefile.in (gdbreplay$(EXEEXT)): Add version.o. * server.c (gdbserver_version): Print PKGVERSION. (gdbsrever_usage): Add stream parameter. Print REPORT_BUGS_TO. (main): Adjust gdbserver_usage calls. * gdbreplay.c (version, host_name): Add declarations. (gdbreplay_version, gdbreplay_usage): New. (main): Accept --version and --help options.
2008-06-06 06:36:57 +08:00
if (REPORT_BUGS_TO[0] && stream == stdout)
fprintf (stream, "Report bugs to \"%s\".\n", REPORT_BUGS_TO);
}
/* Main function. This is called by the real "main" function,
wrapped in a TRY_CATCH that handles any uncaught exceptions. */
static void ATTRIBUTE_NORETURN
captured_main (int argc, char *argv[])
{
FILE *fp;
int ch;
2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * main.c (print_gdb_help): Use REPORT_BUGS_TO for bug-reporting address. * top.c (print_gdb_version): Use PKGVERSION and REPORT_BUGS_TO. doc: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Include ../../config/acx.m4. Use ACX_PKGVERSION and ACX_BUGURL. * configure: Regenerate. * Makefile.in (PKGVERSION, BUGURL_TEXI): Define. (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT. * gdb.texinfo: Use VERSION_PACKAGE and BUGURL. Remove mailing-list-specific text about bug reporting unless BUGURL_DEFAULT. gdbserver: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Makefile.in (gdbreplay$(EXEEXT)): Add version.o. * server.c (gdbserver_version): Print PKGVERSION. (gdbsrever_usage): Add stream parameter. Print REPORT_BUGS_TO. (main): Adjust gdbserver_usage calls. * gdbreplay.c (version, host_name): Add declarations. (gdbreplay_version, gdbreplay_usage): New. (main): Accept --version and --help options.
2008-06-06 06:36:57 +08:00
if (argc >= 2 && strcmp (argv[1], "--version") == 0)
{
gdbreplay_version ();
exit (0);
}
if (argc >= 2 && strcmp (argv[1], "--help") == 0)
{
gdbreplay_usage (stdout);
exit (0);
}
if (argc < 3)
{
2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * main.c (print_gdb_help): Use REPORT_BUGS_TO for bug-reporting address. * top.c (print_gdb_version): Use PKGVERSION and REPORT_BUGS_TO. doc: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Include ../../config/acx.m4. Use ACX_PKGVERSION and ACX_BUGURL. * configure: Regenerate. * Makefile.in (PKGVERSION, BUGURL_TEXI): Define. (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT. * gdb.texinfo: Use VERSION_PACKAGE and BUGURL. Remove mailing-list-specific text about bug reporting unless BUGURL_DEFAULT. gdbserver: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Makefile.in (gdbreplay$(EXEEXT)): Add version.o. * server.c (gdbserver_version): Print PKGVERSION. (gdbsrever_usage): Add stream parameter. Print REPORT_BUGS_TO. (main): Adjust gdbserver_usage calls. * gdbreplay.c (version, host_name): Add declarations. (gdbreplay_version, gdbreplay_usage): New. (main): Accept --version and --help options.
2008-06-06 06:36:57 +08:00
gdbreplay_usage (stderr);
exit (1);
}
fp = fopen (argv[1], "r");
if (fp == NULL)
{
perror_with_name (argv[1]);
1999-07-08 04:19:36 +08:00
}
remote_open (argv[2]);
while ((ch = logchar (fp)) != EOF)
{
switch (ch)
{
case 'w':
/* data sent from gdb to gdbreplay, accept and match it */
expect (fp);
break;
case 'r':
/* data sent from gdbreplay to gdb, play it */
play (fp);
break;
case 'c':
/* Command executed by gdb */
while ((ch = logchar (fp)) != EOL);
break;
}
}
remote_close ();
exit (0);
}
int
main (int argc, char *argv[])
{
Rewrite TRY/CATCH This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.
2019-04-04 06:02:42 +08:00
try
{
captured_main (argc, argv);
}
Rename gdb exception types This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.
2019-04-04 05:59:07 +08:00
catch (const gdb_exception &exception)
{
if (exception.reason == RETURN_ERROR)
{
fflush (stdout);
Make exceptions use std::string and be self-managing This changes the exception's "message" member to be a shared_ptr wrapping a std::string. This allows removing the stack of exception messages, because now exceptions will self-destruct when needed. This also adds a noexcept copy constructor and operator= to gdb_exception, plus a "what" method. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c (gdb_xml_parser::parse): Update. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * value.c (show_convenience): Update. * unittests/cli-utils-selftests.c (test_number_or_range_parser) (test_parse_flags_qcs): Update. * thread.c (thr_try_catch_cmd): Update. * target.c (target_translate_tls_address): Update. * stack.c (print_frame_arg, read_frame_local, read_frame_arg) (info_frame_command_core, frame_apply_command_count): Update. * rust-exp.y (rust_lex_exception_test): Update. * riscv-tdep.c (riscv_print_one_register_info): Update. * remote.c (remote_target::enable_btrace): Update. * record-btrace.c (record_btrace_enable_warn): Update. * python/py-utils.c (gdbpy_convert_exception): Update. * printcmd.c (do_one_display, print_variable_and_value): Update. * mi/mi-main.c (mi_print_exception): Update. * mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT. * mi/mi-cmd-stack.c (list_arg_or_local): Update. * linux-nat.c (linux_nat_target::attach): Update. * linux-fork.c (class scoped_switch_fork_info): Update. * infrun.c (displaced_step_prepare): Update. * infcall.c (call_function_by_hand_dummy): Update. * guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update. * gnu-v3-abi.c (print_one_vtable): Update. * frame.c (get_prev_frame_always): Update. * f-valprint.c (info_common_command_for_block): Update. * exec.c (try_open_exec_file): Update. * exceptions.c (print_exception, exception_print) (exception_fprintf, exception_print_same): Update. * dwarf2-frame.c (dwarf2_build_frame_info): Update. * dwarf-index-cache.c (index_cache::store) (index_cache::lookup_gdb_index): Update. * darwin-nat.c (maybe_cache_shell): Update. * cp-valprint.c (cp_print_value_fields): Update. * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol) (gcc_cplus_symbol_address): Update. * compile/compile-c-symbols.c (gcc_convert_symbol) (gcc_symbol_address, generate_c_for_for_one_variable): Update. * common/selftest.c: Update. * common/common-exceptions.h (struct gdb_exception) <message>: Now a std::string. (exception_try_scope_entry, exception_try_scope_exit): Don't declare. (struct exception_try_scope): Remove. (TRY): Don't use exception_try_scope. (struct gdb_exception): Add constructor, operator=. <what>: New method. (struct gdb_exception_RETURN_MASK_ALL) (struct gdb_exception_RETURN_MASK_ERROR) (struct gdb_exception_RETURN_MASK_QUIT): Add constructor. (struct gdb_quit_bad_alloc): Update. * common/common-exceptions.c (exception_none): Change initializer. (struct catcher) <state, exception>: Initialize inline. <prev>: Remove member. (current_catcher): Remove. (catchers): New global. (exceptions_state_mc_init): Simplify. (catcher_pop): Remove. (exceptions_state_mc, exceptions_state_mc_catch): Update. (try_scope_depth, exception_try_scope_entry) (exception_try_scope_exit): Remove. (throw_exception_sjlj): Update. (exception_messages, exception_messages_size): Remove. (throw_it): Simplify. (gdb_exception_sliced_copy): Remove. (throw_exception_cxx): Update. * cli/cli-script.c (script_from_file): Update. * breakpoint.c (insert_bp_location, update_breakpoint_locations): Update. * ada-valprint.c (ada_val_print): Update. * ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr) (create_excep_cond_exprs): Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c (handle_btrace_general_set, handle_qxfer_btrace) (handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup) (captured_main, main): Update. * gdbreplay.c (main): Update.
2019-01-29 01:11:10 +08:00
fprintf (stderr, "%s\n", exception.what ());
}
exit (1);
}
gdb_assert_not_reached ("captured_main should never return");
}