The boot sequence mentioned in the documentation referred to an older
boot flow. This patch updates the boot sequence to the TBBR boot flow
that is currently being followed.
Signed-off-by: Deepthi Peter <deepthi.peter@arm.com>
Change-Id: I183458cea6d43dcf8acba2e0422920ab5541fdfc
This patch fixes system suspend in OS-initiated mode by setting the
value of `last_at_pwrlvl` in the `psci_power_state_t` object to
`PLAT_MAX_PWR_LVL`, which otherwise would result in undefined behavior.
This is conditionally compiled into the build depending on the value of
the `PSCI_OS_INIT_MODE` build option.
Change-Id: Ib9ff606b7eebd8a8224891a0d239a4e13311fe2a
Signed-off-by: Wing Li <wingers@google.com>
This patch fixes system suspend in OS-initiated mode by setting the
value of `last_at_pwrlvl` in the `psci_power_state_t` object to
`PLAT_MAX_PWR_LVL`, which otherwise would result in undefined behavior.
This is conditionally compiled into the build depending on the value of
the `PSCI_OS_INIT_MODE` build option.
Change-Id: Ia0fb1e68af9320370325642b17c4569e9580aa3a
Signed-off-by: Wing Li <wingers@google.com>
Currently we have a large series of errata_refactor patches pending
and they are all failing on arm_fpga build when we add errata_framework.
Errata framework can cause the size to grow and thus causing build
failure on bl31 size. This as of today is blocking us from
merging most of our changes as it will introduce a CI failure.
As an workaround we try to just reduce the arm_fpga build by a710
platform, we have a715 and a720 which should be ok I think.
Once everyone are available for further discussion we could revert this
change back and discuss further whats the right approach.
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Change-Id: I96a821e10aaecf04db7407fb2df38012839bfb94
* changes:
feat(intel): platform enablement for Agilex5 SoC FPGA
feat(intel): ccu driver for Agilex5 SoC FPGA
feat(intel): vab support for Agilex5 SoC FPGA
feat(intel): sdmmc/nand/combo-phy/qspi driver for Agilex5 SoC FPGA
feat(intel): ddr driver for Agilex5 SoC FPGA
feat(intel): power manager for Agilex5 SoC FPGA
feat(intel): cold/warm reset and smp support for Agilex5 SoC FPGA
feat(intel): reset manager support for Agilex5 SoC FPGA
feat(intel): mailbox and SMC support for Agilex5 SoC FPGA
feat(intel): system manager support for Agilex5 SoC FPGA
feat(intel): memory controller support for Agilex5 SoC FPGA
feat(intel): clock manager support for Agilex5 SoC FPGA
feat(intel): mmc support for Agilex5 SoC FPGA
feat(intel): uart support for Agilex5 SoC FPGA
feat(intel): pinmux, peripheral and Handoff support for Agilex5 SoC FPGA
* changes:
docs(imx9): add imx93 platform
feat(imx93): add OPTEE support
feat(imx93): protect OPTEE memory to secure access only
feat(imx93): add cpuidle and basic suspend support
feat(imx93): add reset & poweroff support
feat(imx93): allow SoC masters access to system TCM
feat(imx93): update the ocram trdc config for did10
feat(imx93): add the basic support
feat(imx93): add the trdc driver
build(changelog): add new scopes for nxp imx platform
A separate design document for Measured Boot covers the porting
guidelines for the Measured Boot interfaces. As a result,
the Measured Boot interfaces have been removed from the porting
guide and a link to the Measured Boot design document has been
provided.
Change-Id: Ia6bd2620d830aea6aececab4af7e10a6d737f025
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
The code review guidelines have been updated to explain when
patches that do not receive a response to the review comments
will be abandoned.
Change-Id: I60539e16ca41245cf1b352f24557be1b3c67c367
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Update 'PSA_INITIAL_ATTEST_TOKEN_MAX_SIZE' to
'PSA_INITIAL_ATTEST_MAX_TOKEN_SIZE' which is defined
in the PSA Certified Attestation API spec.
Change-Id: I5837fea552e6fe18a203412eb90d41e2f90ad6f1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
The fact that this was void instead of int, as required, caused
the test-running code to assume that the tests always failed.
Fixing the return type fixes the always-tests-failing bug.
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Change-Id: Ief55fe15c437c87dac1d03419a8e148f5d864b8d
In their respective makefiles, cert_create, encrypt_fw and fiptool
depend on the --openssl phony target as a prerequisite. This forces
those tools to be re-linked each time.
Move the dependencies on the --openssl target from the tools to their
makefiles all targets, to avoid unnecessary linking while preserving the
OpenSSL version printing done in the --openssl targets when in debug.
Fixes: cf2dd17ddd ("refactor(security): add OpenSSL 1.x compatibility")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Change-Id: I98a3ab30f36dffc253cecaaf3a57d2712522135d
Add support to qemu "neoverse-v1" cpu for "qemu" ('virt') platform.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Change-Id: I4821115b54ca596fe27cb9d74a95429cd3cb21d9
This patch is used to enable platform enablement for
Agilex5 SoC FPGA.
New feature:
1. Added ATF->Zephyr boot option
2. Added xlat_v2 for MMU
3. Added ATF->Linux boot option
4. Added SMP support
5. Added HPS bridges support
6. Added EMULATOR support
7. Added DDR support
8. Added GICv3 Redistirbution init
9. Added SDMMC/NAND/Combo Phy support
10. Updated GIC as secure access
11. Added CCU driver support
12. Updated product name -> Agilex5
13. Updated register address based on y22ww52.2 RTL
14. Updated system counter freq to 400MHz
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ice82f3e4535527cfd01500d4d528402985f72009
This patch is used to implement CCU driver for
Agilex5 SoC FPGA.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ic5e38499c969486682761c00d9e050e60c883725
This patch is used to implement VAB to support for
Agilex5 SoC FPGA.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I421f11225cd549f35f06e87b8ad2c44b716b2a78
This patch is used to implement sdmmc/nand/combo-phy
driver to support Cadence IP for Agilex5 SoC FPGA.
1. Added SDMMC/NAND/COMBO-PHY support.
2. Updated product name -> Agilex5
3. Updated QSPI base address
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I6db689d2b784c9f59a25701ab34517f6f6b0a0e6
This patch is used to implement ddr driver to
support IO96b for Agilex5 SoC FPGA.
1. Added DDR support.
2. Updated product name -> Agilex5
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ibda053de6dbec4a0f12f011d8feeb6c5890fc7a4
This patch is used to implement power manager data
support for Agilex5 SoC FPGA.
1. Added power manager support.
2. Updated product name -> Agilex5
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: If0630c5088a1bc63dff64b1aab225fc70effa6e3
This patch is used to implement
1. Cold/Warm reset and SMP support for
Agilex5 SoC FPGA
2. Updated product name -> Agilex5
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I2c0645bcbf3a5907a4c79f35cffe674920b48f9d
This patch is used to enable reset manager support
for Agilex5 SoC FPGA.
1. Added HPS bridges support
a. SOC2FPGA
b. LWSOC2FPGA
c. F2SDRAM
d. F2SOC
2. Added EMULATOR support
3. Added WDT support
4. Updated product name -> Agilex5
5. Added SMP support
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Icab15b25f787fdccce1de75d102604db23beaf11
This patch is used to enable mailbox and SMC support
for Agilex5 SoC FPGA.
1. Enabled mailbox and SMC support.
2. Updated product name -> Agilex5
3. Updated register address based on y22ww52.2 RTL
4. Updated TSN register base address
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I152bee5668b96ef599ded09945167f27a71f23fe
This patch is used to implement system manager data
support for Agilex5 SoC FPGA.
1. Initial SM bring up
2. Support Candence SDMMC/NAND/COMBO PHY
3. Updated product name -> Agilex5
4. Updated register address based on y22ww52.2 RTL
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I12712bddfb67e36a2bf56d2d98ea4ca3037f0a82
This patch is used to enable memory controller support
for Agilex5 SoC FPGA.
1. Added memory controller support.
2. Updated product name -> Agilex5
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I8381b82eeed939b970a7410a6181a514f2c90caa
This patch is used to enable clock manager support
for Agilex5 SoC FPGA.
1. Added clock manager support.
2. Updated product name -> Agilex5
3. Updated register address based on y22ww52.2 RTL
4. Standardized handoff handler.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ic4c57a1955136ef7d22253c3ca52226e5620751b
This patch is used to enable MMC support for
Agilex5 SoC FPGA.
1. Added MMC support.
2. Updated product name -> Agilex5
3. Updated register address based on y22ww52.2 RTL
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I47f5c7f063fc443f29c2af612121abe672ed422b
This patch is used to enable UART & WDT support
for Agilex5 SoC FPGA.
1. Added watchdog support.
2. Updated product name -> Agilex5
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I9346cfde6e033026e4c1e612250e9521bc6b0d47
This patch is used to enable pinmux, peripheral and handoff support
for Agilex5 SoC FPGA.
1. Initial handoff bring up
2. Added power manager handoff implementation
3. Added sdram handoff implementation
4. Updated product name -> Agilex5
5. Updated register address based on y22ww52.2 RTL
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I4b0176bc86c57823127bf41086306015d702577d
