Commit Graph

846 Commits

Author SHA1 Message Date
Simon McVittie
00b6db68de testevdev: Add some EVIOCGNAME and USB name strings to test data
We don't currently use these for anything, but we might start using
them as input to our heuristics as part of #7697.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-16 07:27:48 -07:00
Simon McVittie
3772d6cc99 testevdev: Add raw HID report descriptors where available
We don't currently use these in our device-classification heuristic,
but it could be a useful input in future.

Thanks to Sam Lantinga, Ben Fradella, kevenwyld and schlegp for
providing some of these.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-16 07:27:48 -07:00
Simon McVittie
2b7556fea2 testevdev: Correct typo in bus type for Xbox Series S|X via Bluetooth
All Bluetooth devices are bus type 0x0005.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-16 07:27:48 -07:00
Simon McVittie
c13e511844 testevdev: Try to correct Wii devices guessed from kernel source
The comments here disagreed with the actual bytes. According to
https://elixir.bootlin.com/linux/v6.3.7/source/drivers/hid/hid-wiimote-modules.c,
the Balance Board reports BTN_A and ABS_HAT0X, HAT0Y, HAT1X and HAT1Y.
This means the comments here were correct, but the .abs bits shown
were in the wrong byte.

Matching the Wii U Pro Controller against the same kernel source, it
appears to be correct: it's the same representation as a PS3 gamepad,
except that it lacks the Z and RZ axes for analogue triggers.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-16 06:38:12 -07:00
Simon McVittie
ffdafcd880 testevdev: Verify most Wii devices against real hardware
Some of the test data previously seen here was guessed from kernel
source code, and not all of it was correct. The following devices have
now been verified against `evemu-describe` output with Linux 6.3
(thanks to Jeremy Whiting for collecting this):

- basic Wiimote
    - buttons
    - 3-axis accelerometer
    - infra-red sensor for Sensor Bar location (precise aim)
- Motion Plus accessory (3-axis gyroscope)
- Nunchuck accessory (joystick, 2 buttons, second 3-axis accelerometer)
- Classic Controller accessory (a complete traditional gamepad)

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-16 06:38:12 -07:00
Simon McVittie
16b57d2ff1 testevdev: Add details of another driving simulator controller
Thanks to Ben Fradella.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-15 12:21:36 -07:00
Simon McVittie
2b00751206 testevdev: Expand test data for X-Box One Elite 2
This slightly newer device than the one from #7814 is functionally
equivalent when connected via USB. When connected via Bluetooth, it has
a different button mapping.

Thanks to Sam Lantinga.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-15 08:16:28 -07:00
Sam Lantinga
2e465ae31b Revert "Added SDL_nextafter() and SDL_nextafterf()"
This reverts commit bc5d074818.

It's not clear that we need these yet, so I'm going to remove them for now.
2023-06-14 11:05:10 -07:00
Sylvain
0f24956b0a testautomation_hints.c: free hint memory 2023-06-13 23:12:01 +02:00
Sylvain
2c3717881f testautomation_events.c: initialize "timestamp" to solve "conditional jump or move depends on uninitialised value" 2023-06-13 23:03:32 +02:00
Simon McVittie
56ba7f2ff0 testevdev: Add details of X-Box One Elite 2 via USB
Thanks to iacore for capturing these.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-13 10:33:13 -07:00
Simon McVittie
74484511eb testevdev: Provide a pointer to more information about adding test-cases
Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-13 10:33:13 -07:00
Sam Lantinga
bc5d074818 Added SDL_nextafter() and SDL_nextafterf() 2023-06-13 10:32:21 -07:00
Linus Probert
6ab846b688 clipboard: Fixes additional x11 clipboard bugs found in tests 2023-06-12 10:57:06 -07:00
Sam Lantinga
0103ec1126 Fixed accidental commit 2023-06-10 08:44:08 -07:00
Sam Lantinga
281018f169 Make it clear that you can't mix 2D rendering and the window surface API
Also added functions to query and destroy the window surface so you can switch between modes if you want.

See https://github.com/pygame-community/pygame-ce/issues/2190 for more details.
2023-06-10 08:39:20 -07:00
Simon McVittie
d9c17e7055 testevdev: Add details of some more 8BitDo devices
Thanks to Jeremy Whiting.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
a2ed083285 testevdev: Describe several equivalent devices
https://github.com/ValveSoftware/steam-devices/pull/34 lists several
more devices that are functionally equivalent to this one from the
point of view of their evdev metadata. Thanks to apgrc.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
f4a53e78c8 testevdev: Add test data for a DualSense (PS5) gamepad
Also make details of PS4 gamepads (which are very similar from an evdev
point of view) more specific.

Thanks to Sam Lantinga and Jeremy Whiting for recording these.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
2fb1df1551 testevdev: Add test data for Nintendo Switch Joy-Cons via Bluetooth
Thanks to Jeremy Whiting.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
8a82e06075 testevdev: Add test data for Microsoft Xbox Series S|X Controller
Like the Stadia controller, this is unusual because it represents the
Share button as the Record key from a multimedia keyboard (as of Linux
6.2.11 with the xpad driver). Thanks to Jeremy Whiting.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
ff01b43459 testevdev: Add Google Stadia controller
This is a bit unusual because it has a small number of what would
ordinarily be keyboard keys. Thanks to Jeremy Whiting for recording
this.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
9ad0b8b47f testevdev: Add test data for another Switch Pro Controller
A newer evemu-describe transcript has this same controller with its
buttons mapped differently, presumably a result of driver changes in
the Linux kernel. Either way, we should recognise it as a gamepad.
Thanks to Jeremy Whiting.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
7b526d0cad testevdev: Finish incomplete data for Switch Pro Controller via USB
This didn't include any buttons, which I assume was because I
transcribed them incorrectly rather than reflecting reality. Confirmed
against another Switch Pro Controller on a more recent kernel (thanks
to Jeremy Whiting).

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
4c33ef94c6 testevdev: Note a functionally-equivalent device
We don't need to re-test the heuristic with the same input data, but
knowing that another device has equivalent evdev metadata is useful
information to record. Thanks to Jeremy Whiting.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Simon McVittie
4c035dc1e3 testevdev: Add another laptop touchpad
This was reported by Rémi Bernon as an example of older SDL's non-udev
code path going wrong for touchpads when the invoking user happens to
be in the input group, which I believe was fixed by fdd945f2.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-06-08 11:03:10 -07:00
Ozkan Sezer
e9e4a9175f testautomation_guid.c: fix integer warning in 32 bit builds. 2023-05-31 04:50:02 +03:00
Anonymous Maarten
b4291412a4 tests: build tests with C90 standard
C90 mode is disabled for:
- testautomation: use of isnan/isfinite
- testlock: use of kill
- testvulkan: use of c++ style strings in vulkan.h
2023-05-27 01:49:07 +02:00
Sam Lantinga
128ca70160 Added support for printing wide strings using "%ls" syntax 2023-05-26 13:58:10 -07:00
Sam Lantinga
cb73bed6eb SDL API renaming: SDL TLS functions
Fixes https://github.com/libsdl-org/SDL/issues/7743
2023-05-26 08:33:15 -07:00
Sam Lantinga
c9d8a04945 Added SDL_swprintf() and SDL_vswprintf() 2023-05-26 08:19:04 -07:00
Simon McVittie
a828f5897e testevdev: Add some driving sim controllers from Proton issue reports
Ideally we'd detect these as "joysticks" (or more generally, gaming
controllers), but in most cases their evdev flags are indistinguishable
from an accelerometer or gyro, so the only way to achieve this would be
a table of known devices that doesn't currently exist.

One exception is the one that reports a THROTTLE axis and TRIGGER, THUMB
buttons, which would be reasonable to detect via the joystick heuristic.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-05-23 08:53:19 -07:00
Simon McVittie
c88b1d1ca0 testevdev: Add the ability to mark a device entry as unimplemented
There are some devices for which SDL's device classification heuristic
is known not to give the ideal result. Add a way to incorporate these
into our test data, so that when the heuristic is improved we can
detect them as their intended device type, without making the test fail
before that has been implemented.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-05-23 08:53:19 -07:00
Simon McVittie
22e6319fed testevdev: Add data for some game controllers submitted to steam-devices
This will ensure that detection of these devices doesn't regress.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-05-23 08:52:53 -07:00
Ozkan Sezer
5c019bc97e style fixes for SDL_PROC macros. 2023-05-19 14:10:02 +03:00
Sam Lantinga
a66cad79c1 SDL_GetClosestFullscreenDisplayMode() now takes a boolean whether to include high density modes
Also changed the match to prioritize resolution over refresh rate
2023-05-18 12:15:23 -07:00
Sam Lantinga
d1ee44b65e Add the pixel density to the display mode list in testwm 2023-05-18 07:34:16 -07:00
Sam Lantinga
c699f3d1d8 Updated SDL high DPI support
We have gotten feedback that abstracting the coordinate system based on the display scale is unexpected and it is difficult to adapt existing applications to the proposed API.

The new approach is to provide the coordinate systems that people expect, but provide additional information that will help applications properly handle high DPI situations.

The concepts needed for high DPI support are documented in README-highdpi.md. An example of automatically adapting the content to display scale changes can be found in SDL_test_common.c, where auto_scale_content is checked.

Also, the SDL_WINDOW_ALLOW_HIGHDPI window flag has been replaced by the SDL_HINT_VIDEO_ENABLE_HIGH_PIXEL_DENSITY hint.

Fixes https://github.com/libsdl-org/SDL/issues/7709
2023-05-17 12:58:00 -07:00
Linus Probert
19adfa3ad9 wayland: Add support for images in clipboard.
Re-writes the clipboard data handling in wayland to an on demand
solution where callbacks are provided to generate/provide the clipboard
data when requested by the OS.
2023-05-12 07:54:56 -07:00
Brick
079ae065f1 Added SDL prefix AUDIO_* constants 2023-05-02 08:09:06 -07:00
Sam Lantinga
87ad71f9b2 Rename SDL mutex, semaphore and condition variable types to match SDL 3.0 naming convention 2023-04-28 12:08:33 -07:00
Sam Lantinga
61c0c009ab Rename SDL semaphore and condition variable functions to match SDL 3.0 naming convention
Fixes https://github.com/libsdl-org/SDL/issues/7642
2023-04-28 12:08:33 -07:00
Ryan C. Gordon
e474047ff8 rwlock: Added SDL_rwlock API for shared locks. 2023-04-27 21:54:02 -04:00
Ryan C. Gordon
e5a6c24c82 audio: Redesigned audio conversion code for SDL3.
- SDL_AudioCVT is gone, even internally.
- libsamplerate is gone (I suspect our resampler is finally Good Enough).
- Cleanups and improvements to audio conversion interfaces.
- SDL_AudioStream can change its input/output format/rate/channels on the fly!
2023-04-27 18:35:15 -04:00
Sylvain
bbdde648d8 Android: let main return normally for testautomation 2023-04-14 12:26:12 +02:00
Simon McVittie
c335e3db82 test/template.test.in: Pass SDL_NONINTERACTIVE_ARGUMENTS to installed-tests
Otherwise they'll try to run with no arguments, and fail, when run by
ginsttest-runner.

Fixes: 81ca9d61 "cmake+test: add more automated tests + use properties"
Signed-off-by: Simon McVittie <smcv@collabora.com>
2023-04-12 15:04:11 +00:00
Ozkan Sezer
dfff017fc6 testaudiocapture.c: added missing return statement to main() 2023-04-12 12:56:10 +03:00
Sylvain
0a33ed7a2b testaudiocapture: let main exit normally 2023-04-12 11:43:20 +02:00
Sylvain
c101e719fd testprogram: let main() return normally, don't exit for platform (eg Android) where there is some cleanup afterward. 2023-04-12 11:37:26 +02:00
Sam Lantinga
2aa2fa5449 Added SDL_CreateWindowWithPosition()
It turns out there's a race condition on X11 where the window could be placed by the window manager while being placed by the application, so we need to have the initial position available at window creation.
2023-03-31 17:21:44 -07:00