/* * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public * License v2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public * License along with this program; if not, write to the * Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 021110-1307, USA. * * Modified to add field firmware update support, * those modifications are Copyright (c) 2016 SanDisk Corp. */ #include #include #include #include #include #include #include #include #include #include #include #include /* for BLKGETSIZE */ #include "mmc.h" #include "mmc_cmds.h" #include "3rdparty/hmac_sha/hmac_sha2.h" #ifndef MMC_IOC_MULTI_CMD #error "mmc-utils needs MMC_IOC_MULTI_CMD support (added in kernel v4.4)" #endif #ifndef offsetof #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) #endif #define WP_BLKS_PER_QUERY 32 #define USER_WP_PERM_PSWD_DIS 0x80 #define USER_WP_CD_PERM_WP_DIS 0x40 #define USER_WP_US_PERM_WP_DIS 0x10 #define USER_WP_US_PWR_WP_DIS 0x08 #define USER_WP_US_PERM_WP_EN 0x04 #define USER_WP_US_PWR_WP_EN 0x01 #define USER_WP_CLEAR (USER_WP_US_PERM_WP_DIS | USER_WP_US_PWR_WP_DIS \ | USER_WP_US_PERM_WP_EN | USER_WP_US_PWR_WP_EN) #define WPTYPE_NONE 0 #define WPTYPE_TEMP 1 #define WPTYPE_PWRON 2 #define WPTYPE_PERM 3 int read_extcsd(int fd, __u8 *ext_csd) { int ret = 0; struct mmc_ioc_cmd idata; memset(&idata, 0, sizeof(idata)); memset(ext_csd, 0, sizeof(__u8) * 512); idata.write_flag = 0; idata.opcode = MMC_SEND_EXT_CSD; idata.arg = 0; idata.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; idata.blksz = 512; idata.blocks = 1; mmc_ioc_cmd_set_data(idata, ext_csd); ret = ioctl(fd, MMC_IOC_CMD, &idata); if (ret) perror("ioctl"); return ret; } static void fill_switch_cmd(struct mmc_ioc_cmd *cmd, __u8 index, __u8 value) { cmd->opcode = MMC_SWITCH; cmd->write_flag = 1; cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | (index << 16) | (value << 8) | EXT_CSD_CMD_SET_NORMAL; cmd->flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; } int write_extcsd_value(int fd, __u8 index, __u8 value, unsigned int timeout_ms) { int ret = 0; struct mmc_ioc_cmd idata = {}; fill_switch_cmd(&idata, index, value); /* Kernel will set cmd_timeout_ms if 0 is set */ idata.cmd_timeout_ms = timeout_ms; ret = ioctl(fd, MMC_IOC_CMD, &idata); if (ret) perror("ioctl"); return ret; } int send_status(int fd, __u32 *response) { int ret = 0; struct mmc_ioc_cmd idata; memset(&idata, 0, sizeof(idata)); idata.opcode = MMC_SEND_STATUS; idata.arg = (1 << 16); idata.flags = MMC_RSP_R1 | MMC_CMD_AC; ret = ioctl(fd, MMC_IOC_CMD, &idata); if (ret) perror("ioctl"); *response = idata.response[0]; return ret; } static __u32 get_size_in_blks(int fd) { int res; int size; res = ioctl(fd, BLKGETSIZE, &size); if (res) { fprintf(stderr, "Error getting device size, errno: %d\n", errno); perror(""); return -1; } return size; } static int set_write_protect(int fd, __u32 blk_addr, int on_off) { int ret = 0; struct mmc_ioc_cmd idata; memset(&idata, 0, sizeof(idata)); idata.write_flag = 1; if (on_off) idata.opcode = MMC_SET_WRITE_PROT; else idata.opcode = MMC_CLEAR_WRITE_PROT; idata.arg = blk_addr; idata.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; ret = ioctl(fd, MMC_IOC_CMD, &idata); if (ret) perror("ioctl"); return ret; } static int send_write_protect_type(int fd, __u32 blk_addr, __u64 *group_bits) { int ret = 0; struct mmc_ioc_cmd idata; __u8 buf[8]; __u64 bits = 0; int x; memset(&idata, 0, sizeof(idata)); idata.write_flag = 0; idata.opcode = MMC_SEND_WRITE_PROT_TYPE; idata.blksz = 8, idata.blocks = 1, idata.arg = blk_addr; idata.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; mmc_ioc_cmd_set_data(idata, buf); ret = ioctl(fd, MMC_IOC_CMD, &idata); if (ret) perror("ioctl"); for (x = 0; x < sizeof(buf); x++) bits |= (__u64)(buf[7 - x]) << (x * 8); *group_bits = bits; return ret; } static void print_writeprotect_boot_status(__u8 *ext_csd) { __u8 reg; __u8 ext_csd_rev = ext_csd[EXT_CSD_REV]; /* A43: reserved [174:0] */ if (ext_csd_rev >= 5) { printf("Boot write protection status registers" " [BOOT_WP_STATUS]: 0x%02x\n", ext_csd[174]); reg = ext_csd[EXT_CSD_BOOT_WP]; printf("Boot Area Write protection [BOOT_WP]: 0x%02x\n", reg); printf(" Power ro locking: "); if (reg & EXT_CSD_BOOT_WP_B_PWR_WP_DIS) printf("not possible\n"); else printf("possible\n"); printf(" Permanent ro locking: "); if (reg & EXT_CSD_BOOT_WP_B_PERM_WP_DIS) printf("not possible\n"); else printf("possible\n"); reg = ext_csd[EXT_CSD_BOOT_WP_STATUS]; printf(" partition 0 ro lock status: "); if (reg & EXT_CSD_BOOT_WP_S_AREA_0_PERM) printf("locked permanently\n"); else if (reg & EXT_CSD_BOOT_WP_S_AREA_0_PWR) printf("locked until next power on\n"); else printf("not locked\n"); printf(" partition 1 ro lock status: "); if (reg & EXT_CSD_BOOT_WP_S_AREA_1_PERM) printf("locked permanently\n"); else if (reg & EXT_CSD_BOOT_WP_S_AREA_1_PWR) printf("locked until next power on\n"); else printf("not locked\n"); } } static int get_wp_group_size_in_blks(__u8 *ext_csd, __u32 *size) { __u8 ext_csd_rev = ext_csd[EXT_CSD_REV]; if ((ext_csd_rev < 5) || (ext_csd[EXT_CSD_ERASE_GROUP_DEF] == 0)) return 1; *size = ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * ext_csd[EXT_CSD_HC_WP_GRP_SIZE] * 1024; return 0; } int do_writeprotect_boot_get(int nargs, char **argv) { __u8 ext_csd[512]; int fd, ret; char *device; if (nargs != 2) { fprintf(stderr, "Usage: mmc writeprotect boot get \n"); exit(1); } device = argv[1]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } print_writeprotect_boot_status(ext_csd); close(fd); return ret; } int do_writeprotect_boot_set(int nargs, char **argv) { __u8 ext_csd[512], value; int fd, ret; char *device; char *end; int argi = 1; int permanent = 0; int partition = -1; #ifdef DANGEROUS_COMMANDS_ENABLED if (!strcmp(argv[argi], "-p")){ permanent = 1; argi++; } #endif if (nargs < 1 + argi || nargs > 2 + argi) { fprintf(stderr, "Usage: mmc writeprotect boot set " #ifdef DANGEROUS_COMMANDS_ENABLED "[-p] " #endif " [0|1]\n"); exit(1); } device = argv[argi++]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } if (nargs == 1 + argi) { partition = strtoul(argv[argi], &end, 0); if (*end != '\0' || !(partition == 0 || partition == 1)) { fprintf(stderr, "Invalid partition number (must be 0 or 1): %s\n", argv[argi]); exit(1); } } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } value = ext_csd[EXT_CSD_BOOT_WP]; /* * If permanent protection is already on for one partition and we're * trying to enable power-reset protection for the other we need to make * sure the selection bit for permanent protection still points to the * former or we'll accidentally permanently protect the latter. */ if ((value & EXT_CSD_BOOT_WP_B_PERM_WP_EN) && !permanent) { if (ext_csd[EXT_CSD_BOOT_WP_STATUS] & EXT_CSD_BOOT_WP_S_AREA_1_PERM) { value |= EXT_CSD_BOOT_WP_B_PERM_WP_SEC_SEL; if (partition != 1) partition = 0; } else { /* PERM_WP_SEC_SEL cleared -> pointing to partition 0 */ if (partition != 0) partition = 1; } } if (partition != -1) { value |= EXT_CSD_BOOT_WP_B_SEC_WP_SEL; if (partition == 1) value |= permanent ? EXT_CSD_BOOT_WP_B_PERM_WP_SEC_SEL : EXT_CSD_BOOT_WP_B_PWR_WP_SEC_SEL; } value |= permanent ? EXT_CSD_BOOT_WP_B_PERM_WP_EN : EXT_CSD_BOOT_WP_B_PWR_WP_EN; ret = write_extcsd_value(fd, EXT_CSD_BOOT_WP, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_BOOT_WP, device); exit(1); } close(fd); return ret; } static char *prot_desc[] = { "No", "Temporary", "Power-on", "Permanent" }; static void print_wp_status(__u32 wp_sizeblks, __u32 start_group, __u32 end_group, int rptype) { printf("Write Protect Groups %d-%d (Blocks %d-%d), ", start_group, end_group, start_group * wp_sizeblks, ((end_group + 1) * wp_sizeblks) - 1); printf("%s Write Protection\n", prot_desc[rptype]); } int do_writeprotect_user_get(int nargs, char **argv) { __u8 ext_csd[512]; int fd, ret; char *device; int x; int y = 0; __u32 wp_sizeblks; __u32 dev_sizeblks; __u32 cnt; __u64 bits; __u32 wpblk; __u32 last_wpblk = 0; __u32 prot; __u32 last_prot = -1; int remain; if (nargs != 2) { fprintf(stderr, "Usage: mmc writeprotect user get \n"); exit(1); } device = argv[1]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } ret = get_wp_group_size_in_blks(ext_csd, &wp_sizeblks); if (ret) exit(1); printf("Write Protect Group size in blocks/bytes: %d/%d\n", wp_sizeblks, wp_sizeblks * 512); dev_sizeblks = get_size_in_blks(fd); cnt = dev_sizeblks / wp_sizeblks; for (x = 0; x < cnt; x += WP_BLKS_PER_QUERY) { ret = send_write_protect_type(fd, x * wp_sizeblks, &bits); if (ret) break; remain = cnt - x; if (remain > WP_BLKS_PER_QUERY) remain = WP_BLKS_PER_QUERY; for (y = 0; y < remain; y++) { prot = (bits >> (y * 2)) & 0x3; if (prot != last_prot) { /* not first time */ if (last_prot != -1) { wpblk = x + y; print_wp_status(wp_sizeblks, last_wpblk, wpblk - 1, last_prot); last_wpblk = wpblk; } last_prot = prot; } } } if (last_wpblk != (x + y - 1)) print_wp_status(wp_sizeblks, last_wpblk, cnt - 1, last_prot); close(fd); return ret; } int do_writeprotect_user_set(int nargs, char **argv) { __u8 ext_csd[512]; int fd, ret; char *device; int blk_start; int blk_cnt; __u32 wp_blks; __u8 user_wp; int x; int wptype; if (nargs != 5) goto usage; device = argv[4]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } if (!strcmp(argv[1], "none")) { wptype = WPTYPE_NONE; } else if (!strcmp(argv[1], "temp")) { wptype = WPTYPE_TEMP; } else if (!strcmp(argv[1], "pwron")) { wptype = WPTYPE_PWRON; #ifdef DANGEROUS_COMMANDS_ENABLED } else if (!strcmp(argv[1], "perm")) { wptype = WPTYPE_PERM; #endif /* DANGEROUS_COMMANDS_ENABLED */ } else { fprintf(stderr, "Error, invalid \"type\"\n"); goto usage; } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } ret = get_wp_group_size_in_blks(ext_csd, &wp_blks); if (ret) { fprintf(stderr, "Operation not supported for this device\n"); exit(1); } blk_start = strtol(argv[2], NULL, 0); blk_cnt = strtol(argv[3], NULL, 0); if ((blk_start % wp_blks) || (blk_cnt % wp_blks)) { fprintf(stderr, " and must be a "); fprintf(stderr, "multiple of the Write Protect Group (%d)\n", wp_blks); exit(1); } if (wptype != WPTYPE_NONE) { user_wp = ext_csd[EXT_CSD_USER_WP]; user_wp &= ~USER_WP_CLEAR; switch (wptype) { case WPTYPE_TEMP: break; case WPTYPE_PWRON: user_wp |= USER_WP_US_PWR_WP_EN; break; case WPTYPE_PERM: user_wp |= USER_WP_US_PERM_WP_EN; break; } if (user_wp != ext_csd[EXT_CSD_USER_WP]) { ret = write_extcsd_value(fd, EXT_CSD_USER_WP, user_wp, 0); if (ret) { fprintf(stderr, "Error setting EXT_CSD\n"); exit(1); } } } for (x = 0; x < blk_cnt; x += wp_blks) { ret = set_write_protect(fd, blk_start + x, wptype != WPTYPE_NONE); if (ret) { fprintf(stderr, "Could not set write protect for %s\n", device); exit(1); } } if (wptype != WPTYPE_NONE) { ret = write_extcsd_value(fd, EXT_CSD_USER_WP, ext_csd[EXT_CSD_USER_WP], 0); if (ret) { fprintf(stderr, "Error restoring EXT_CSD\n"); exit(1); } } return ret; usage: fprintf(stderr, "Usage: mmc writeprotect user set \n"); exit(1); } int do_disable_512B_emulation(int nargs, char **argv) { __u8 ext_csd[512], native_sector_size, data_sector_size, wr_rel_param; int fd, ret; char *device; if (nargs != 2) { fprintf(stderr, "Usage: mmc disable 512B emulation \n"); exit(1); } device = argv[1]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } wr_rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; native_sector_size = ext_csd[EXT_CSD_NATIVE_SECTOR_SIZE]; data_sector_size = ext_csd[EXT_CSD_DATA_SECTOR_SIZE]; if (native_sector_size && !data_sector_size && (wr_rel_param & EN_REL_WR)) { ret = write_extcsd_value(fd, EXT_CSD_USE_NATIVE_SECTOR, 1, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", 1, EXT_CSD_NATIVE_SECTOR_SIZE, device); exit(1); } printf("MMC disable 512B emulation successful. Now reset the device to switch to 4KB native sector mode.\n"); } else if (native_sector_size && data_sector_size) { printf("MMC 512B emulation mode is already disabled; doing nothing.\n"); } else { printf("MMC does not support disabling 512B emulation mode.\n"); } close(fd); return ret; } int do_write_boot_en(int nargs, char **argv) { __u8 ext_csd[512]; __u8 value = 0; int fd, ret; char *device; int boot_area, send_ack; if (nargs != 4) { fprintf(stderr, "Usage: mmc bootpart enable \n"); exit(1); } /* * If is 1, the device will send acknowledgment * pattern "010" to the host when boot operation begins. * If is 0, it won't. */ boot_area = strtol(argv[1], NULL, 10); send_ack = strtol(argv[2], NULL, 10); device = argv[3]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } value = ext_csd[EXT_CSD_PART_CONFIG]; switch (boot_area) { case EXT_CSD_PART_CONFIG_ACC_NONE: value &= ~(7 << 3); break; case EXT_CSD_PART_CONFIG_ACC_BOOT0: value |= (1 << 3); value &= ~(3 << 4); break; case EXT_CSD_PART_CONFIG_ACC_BOOT1: value |= (1 << 4); value &= ~(1 << 3); value &= ~(1 << 5); break; case EXT_CSD_PART_CONFIG_ACC_USER_AREA: value |= (boot_area << 3); break; default: fprintf(stderr, "Cannot enable the boot area\n"); exit(1); } if (send_ack) value |= EXT_CSD_PART_CONFIG_ACC_ACK; else value &= ~EXT_CSD_PART_CONFIG_ACC_ACK; ret = write_extcsd_value(fd, EXT_CSD_PART_CONFIG, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_PART_CONFIG, device); exit(1); } close(fd); return ret; } int do_boot_bus_conditions_set(int nargs, char **argv) { __u8 ext_csd[512]; __u8 value = 0; int fd, ret; char *device; if (nargs != 5) { fprintf(stderr, "Usage: mmc: bootbus set \n"); exit(1); } if (strcmp(argv[1], "single_backward") == 0) value |= 0; else if (strcmp(argv[1], "single_hs") == 0) value |= 0x8; else if (strcmp(argv[1], "dual") == 0) value |= 0x10; else { fprintf(stderr, "illegal specified\n"); exit(1); } if (strcmp(argv[2], "x1") == 0) value |= 0; else if (strcmp(argv[2], "retain") == 0) value |= 0x4; else { fprintf(stderr, "illegal specified\n"); exit(1); } if (strcmp(argv[3], "x1") == 0) value |= 0; else if (strcmp(argv[3], "x4") == 0) value |= 0x1; else if (strcmp(argv[3], "x8") == 0) value |= 0x2; else { fprintf(stderr, "illegal specified\n"); exit(1); } device = argv[4]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } printf("Changing ext_csd[BOOT_BUS_CONDITIONS] from 0x%02x to 0x%02x\n", ext_csd[EXT_CSD_BOOT_BUS_CONDITIONS], value); ret = write_extcsd_value(fd, EXT_CSD_BOOT_BUS_CONDITIONS, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_BOOT_BUS_CONDITIONS, device); exit(1); } close(fd); return ret; } int do_hwreset(int value, int nargs, char **argv) { __u8 ext_csd[512]; int fd, ret; char *device; if (nargs != 2) { fprintf(stderr, "Usage: mmc hwreset enable \n"); exit(1); } device = argv[1]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } if ((ext_csd[EXT_CSD_RST_N_FUNCTION] & EXT_CSD_RST_N_EN_MASK) == EXT_CSD_HW_RESET_EN) { fprintf(stderr, "H/W Reset is already permanently enabled on %s\n", device); exit(1); } if ((ext_csd[EXT_CSD_RST_N_FUNCTION] & EXT_CSD_RST_N_EN_MASK) == EXT_CSD_HW_RESET_DIS) { fprintf(stderr, "H/W Reset is already permanently disabled on %s\n", device); exit(1); } ret = write_extcsd_value(fd, EXT_CSD_RST_N_FUNCTION, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", value, EXT_CSD_RST_N_FUNCTION, device); exit(1); } close(fd); return ret; } int do_hwreset_en(int nargs, char **argv) { return do_hwreset(EXT_CSD_HW_RESET_EN, nargs, argv); } int do_hwreset_dis(int nargs, char **argv) { return do_hwreset(EXT_CSD_HW_RESET_DIS, nargs, argv); } int do_write_bkops_en(int nargs, char **argv) { __u8 ext_csd[512], value = 0; int fd, ret; char *device; char *en_type; if (nargs != 3) { fprintf(stderr, "Usage: mmc bkops_en \n"); exit(1); } en_type = argv[1]; device = argv[2]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } if (strcmp(en_type, "auto") == 0) { if (ext_csd[EXT_CSD_REV] < EXT_CSD_REV_V5_0) { fprintf(stderr, "%s doesn't support AUTO_EN in the BKOPS_EN register\n", device); exit(1); } ret = write_extcsd_value(fd, EXT_CSD_BKOPS_EN, BKOPS_AUTO_ENABLE, 0); } else if (strcmp(en_type, "manual") == 0) { ret = write_extcsd_value(fd, EXT_CSD_BKOPS_EN, BKOPS_MAN_ENABLE, 0); } else { fprintf(stderr, "%s invalid mode for BKOPS_EN requested: %s. Valid options: auto or manual\n", en_type, device); exit(1); } if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", value, EXT_CSD_BKOPS_EN, device); exit(1); } close(fd); return ret; } int do_status_get(int nargs, char **argv) { __u32 response; int fd, ret; char *device; const char *str; __u8 state; if (nargs != 2) { fprintf(stderr, "Usage: mmc status get \n"); exit(1); } device = argv[1]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = send_status(fd, &response); if (ret) { fprintf(stderr, "Could not read response to SEND_STATUS from %s\n", device); exit(1); } printf("SEND_STATUS response: 0x%08x\n", response); if (response & R1_OUT_OF_RANGE) printf("ERROR: ADDRESS_OUT_OF_RANGE\n"); if (response & R1_ADDRESS_ERROR) printf("ERROR: ADDRESS_MISALIGN\n"); if (response & R1_BLOCK_LEN_ERROR) printf("ERROR: BLOCK_LEN_ERROR\n"); if (response & R1_ERASE_SEQ_ERROR) printf("ERROR: ERASE_SEQ_ERROR\n"); if (response & R1_ERASE_PARAM) printf("ERROR: ERASE_PARAM_ERROR\n"); if (response & R1_WP_VIOLATION) printf("ERROR: WP_VOILATION\n"); if (response & R1_CARD_IS_LOCKED) printf("STATUS: DEVICE_IS_LOCKED\n"); if (response & R1_LOCK_UNLOCK_FAILED) printf("ERROR: LOCK_UNLOCK_IS_FAILED\n"); if (response & R1_COM_CRC_ERROR) printf("ERROR: COM_CRC_ERROR\n"); if (response & R1_ILLEGAL_COMMAND) printf("ERROR: ILLEGAL_COMMAND\n"); if (response & R1_CARD_ECC_FAILED) printf("ERROR: DEVICE_ECC_FAILED\n"); if (response & R1_CC_ERROR) printf("ERROR: CC_ERROR\n"); if (response & R1_ERROR) printf("ERROR: ERROR\n"); if (response & R1_CID_CSD_OVERWRITE) printf("ERROR: CID/CSD OVERWRITE\n"); if (response & R1_WP_ERASE_SKIP) printf("ERROR: WP_ERASE_SKIP\n"); if (response & R1_ERASE_RESET) printf("ERROR: ERASE_RESET\n"); state = (response >> 9) & 0xF; switch (state) { case 0: str = "IDLE"; break; case 1: str = "READY"; break; case 2: str = "IDENT"; break; case 3: str = "STDBY"; break; case 4: str = "TRANS"; break; case 5: str = "DATA"; break; case 6: str = "RCV"; break; case 7: str = "PRG"; break; case 8: str = "DIS"; break; case 9: str = "BTST"; break; case 10: str = "SLP"; break; default: printf("Attention : Device state is INVALID: Kindly check the Response\n"); goto out_free; } printf("DEVICE STATE: %s\n", str); if (response & R1_READY_FOR_DATA) printf("STATUS: READY_FOR_DATA\n"); if (response & R1_SWITCH_ERROR) printf("ERROR: SWITCH_ERROR\n"); if (response & R1_EXCEPTION_EVENT) printf("STATUS: EXCEPTION_EVENT\n"); /* Check EXCEPTION_EVENTS_STATUS fields for further actions */ if (response & R1_APP_CMD) printf("STATUS: APP_CMD\n"); out_free: close(fd); return ret; } unsigned int get_sector_count(__u8 *ext_csd) { return (ext_csd[EXT_CSD_SEC_COUNT_3] << 24) | (ext_csd[EXT_CSD_SEC_COUNT_2] << 16) | (ext_csd[EXT_CSD_SEC_COUNT_1] << 8) | ext_csd[EXT_CSD_SEC_COUNT_0]; } int is_blockaddresed(__u8 *ext_csd) { unsigned int sectors = get_sector_count(ext_csd); /* over 2GiB devices are block-addressed */ return (sectors > (2u * 1024 * 1024 * 1024) / 512); } unsigned int get_hc_wp_grp_size(__u8 *ext_csd) { return ext_csd[221]; } unsigned int get_hc_erase_grp_size(__u8 *ext_csd) { return ext_csd[224]; } int set_partitioning_setting_completed(int dry_run, const char * const device, int fd) { int ret; if (dry_run == 1) { fprintf(stderr, "NOT setting PARTITION_SETTING_COMPLETED\n"); fprintf(stderr, "These changes will not take effect neither " "now nor after a power cycle\n"); return 1; } else if (dry_run == 2) { printf("-c given, expecting more partition settings before " "writing PARTITION_SETTING_COMPLETED\n"); return 0; } fprintf(stderr, "setting OTP PARTITION_SETTING_COMPLETED!\n"); ret = write_extcsd_value(fd, EXT_CSD_PARTITION_SETTING_COMPLETED, 0x1, 0); if (ret) { fprintf(stderr, "Could not write 0x1 to " "EXT_CSD[%d] in %s\n", EXT_CSD_PARTITION_SETTING_COMPLETED, device); return 1; } __u32 response; ret = send_status(fd, &response); if (ret) { fprintf(stderr, "Could not get response to SEND_STATUS " "from %s\n", device); return 1; } if (response & R1_SWITCH_ERROR) { fprintf(stderr, "Setting OTP PARTITION_SETTING_COMPLETED " "failed on %s\n", device); return 1; } fprintf(stderr, "Setting OTP PARTITION_SETTING_COMPLETED on " "%s SUCCESS\n", device); fprintf(stderr, "Device power cycle needed for settings to " "take effect.\n" "Confirm that PARTITION_SETTING_COMPLETED bit is set " "using 'extcsd read' after power cycle\n"); return 0; } int check_enhanced_area_total_limit(const char * const device, int fd) { __u8 ext_csd[512]; __u32 regl; unsigned long max_enh_area_sz, user_area_sz, enh_area_sz = 0; unsigned long gp4_part_sz, gp3_part_sz, gp2_part_sz, gp1_part_sz; unsigned long total_sz, total_gp_user_sz; unsigned int wp_sz, erase_sz; int ret; ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } wp_sz = get_hc_wp_grp_size(ext_csd); erase_sz = get_hc_erase_grp_size(ext_csd); regl = (ext_csd[EXT_CSD_GP_SIZE_MULT_4_2] << 16) | (ext_csd[EXT_CSD_GP_SIZE_MULT_4_1] << 8) | ext_csd[EXT_CSD_GP_SIZE_MULT_4_0]; gp4_part_sz = 512l * regl * erase_sz * wp_sz; if (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & EXT_CSD_ENH_4) { enh_area_sz += gp4_part_sz; printf("Enhanced GP4 Partition Size [GP_SIZE_MULT_4]: 0x%06x\n", regl); printf(" i.e. %lu KiB\n", gp4_part_sz); } regl = (ext_csd[EXT_CSD_GP_SIZE_MULT_3_2] << 16) | (ext_csd[EXT_CSD_GP_SIZE_MULT_3_1] << 8) | ext_csd[EXT_CSD_GP_SIZE_MULT_3_0]; gp3_part_sz = 512l * regl * erase_sz * wp_sz; if (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & EXT_CSD_ENH_3) { enh_area_sz += gp3_part_sz; printf("Enhanced GP3 Partition Size [GP_SIZE_MULT_3]: 0x%06x\n", regl); printf(" i.e. %lu KiB\n", gp3_part_sz); } regl = (ext_csd[EXT_CSD_GP_SIZE_MULT_2_2] << 16) | (ext_csd[EXT_CSD_GP_SIZE_MULT_2_1] << 8) | ext_csd[EXT_CSD_GP_SIZE_MULT_2_0]; gp2_part_sz = 512l * regl * erase_sz * wp_sz; if (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & EXT_CSD_ENH_2) { enh_area_sz += gp2_part_sz; printf("Enhanced GP2 Partition Size [GP_SIZE_MULT_2]: 0x%06x\n", regl); printf(" i.e. %lu KiB\n", gp2_part_sz); } regl = (ext_csd[EXT_CSD_GP_SIZE_MULT_1_2] << 16) | (ext_csd[EXT_CSD_GP_SIZE_MULT_1_1] << 8) | ext_csd[EXT_CSD_GP_SIZE_MULT_1_0]; gp1_part_sz = 512l * regl * erase_sz * wp_sz; if (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & EXT_CSD_ENH_1) { enh_area_sz += gp1_part_sz; printf("Enhanced GP1 Partition Size [GP_SIZE_MULT_1]: 0x%06x\n", regl); printf(" i.e. %lu KiB\n", gp1_part_sz); } regl = (ext_csd[EXT_CSD_ENH_SIZE_MULT_2] << 16) | (ext_csd[EXT_CSD_ENH_SIZE_MULT_1] << 8) | ext_csd[EXT_CSD_ENH_SIZE_MULT_0]; user_area_sz = 512l * regl * erase_sz * wp_sz; if (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & EXT_CSD_ENH_USR) { enh_area_sz += user_area_sz; printf("Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x%06x\n", regl); printf(" i.e. %lu KiB\n", user_area_sz); } regl = (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT_2] << 16) | (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT_1] << 8) | ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT_0]; max_enh_area_sz = 512l * regl * erase_sz * wp_sz; printf("Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x%06x\n", regl); printf(" i.e. %lu KiB\n", max_enh_area_sz); if (enh_area_sz > max_enh_area_sz) { fprintf(stderr, "Programmed total enhanced size %lu KiB cannot exceed max enhanced area %lu KiB %s\n", enh_area_sz, max_enh_area_sz, device); return 1; } total_sz = get_sector_count(ext_csd) / 2; total_gp_user_sz = gp4_part_sz + gp3_part_sz + gp2_part_sz + gp1_part_sz + user_area_sz; if (total_gp_user_sz > total_sz) { fprintf(stderr, "requested total partition size %lu KiB cannot exceed card capacity %lu KiB %s\n", total_gp_user_sz, total_sz, device); return 1; } return 0; } int do_create_gp_partition(int nargs, char **argv) { __u8 value; __u8 ext_csd[512]; __u8 address; int fd, ret; char *device; int dry_run = 1; int partition, enh_attr, ext_attr; unsigned int length_kib, gp_size_mult; unsigned long align; if (nargs != 7) { fprintf(stderr, "Usage: mmc gp create <-y|-n|-c> \n"); exit(1); } if (!strcmp("-y", argv[1])) { dry_run = 0; } else if (!strcmp("-c", argv[1])) { dry_run = 2; } length_kib = strtol(argv[2], NULL, 10); partition = strtol(argv[3], NULL, 10); enh_attr = strtol(argv[4], NULL, 10); ext_attr = strtol(argv[5], NULL, 10); device = argv[6]; if (partition < 1 || partition > 4) { printf("Invalid gp partition number; valid range [1-4].\n"); exit(1); } if (enh_attr && ext_attr) { printf("Not allowed to set both enhanced attribute and extended attribute\n"); exit(1); } fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } /* assert not PARTITION_SETTING_COMPLETED */ if (ext_csd[EXT_CSD_PARTITION_SETTING_COMPLETED]) { printf(" Device is already partitioned\n"); exit(1); } align = 512l * get_hc_wp_grp_size(ext_csd) * get_hc_erase_grp_size(ext_csd); gp_size_mult = (length_kib + align/2l) / align; /* set EXT_CSD_ERASE_GROUP_DEF bit 0 */ ret = write_extcsd_value(fd, EXT_CSD_ERASE_GROUP_DEF, 0x1, 0); if (ret) { fprintf(stderr, "Could not write 0x1 to EXT_CSD[%d] in %s\n", EXT_CSD_ERASE_GROUP_DEF, device); exit(1); } value = (gp_size_mult >> 16) & 0xff; address = EXT_CSD_GP_SIZE_MULT_1_2 + (partition - 1) * 3; ret = write_extcsd_value(fd, address, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", value, address, device); exit(1); } value = (gp_size_mult >> 8) & 0xff; address = EXT_CSD_GP_SIZE_MULT_1_1 + (partition - 1) * 3; ret = write_extcsd_value(fd, address, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", value, address, device); exit(1); } value = gp_size_mult & 0xff; address = EXT_CSD_GP_SIZE_MULT_1_0 + (partition - 1) * 3; ret = write_extcsd_value(fd, address, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", value, address, device); exit(1); } value = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE]; if (enh_attr) value |= (1 << partition); else value &= ~(1 << partition); ret = write_extcsd_value(fd, EXT_CSD_PARTITIONS_ATTRIBUTE, value, 0); if (ret) { fprintf(stderr, "Could not write EXT_CSD_ENH_%x to EXT_CSD[%d] in %s\n", partition, EXT_CSD_PARTITIONS_ATTRIBUTE, device); exit(1); } address = EXT_CSD_EXT_PARTITIONS_ATTRIBUTE_0 + (partition - 1) / 2; value = ext_csd[address]; if (ext_attr) value |= (ext_attr << (4 * ((partition - 1) % 2))); else value &= (0xF << (4 * ((partition % 2)))); ret = write_extcsd_value(fd, address, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%x to EXT_CSD[%d] in %s\n", value, address, device); exit(1); } ret = check_enhanced_area_total_limit(device, fd); if (ret) exit(1); if (set_partitioning_setting_completed(dry_run, device, fd)) exit(1); return 0; } int do_enh_area_set(int nargs, char **argv) { __u8 value; __u8 ext_csd[512]; int fd, ret; char *device; int dry_run = 1; unsigned int start_kib, length_kib, enh_start_addr, enh_size_mult; unsigned long align; if (nargs != 5) { fprintf(stderr, "Usage: mmc enh_area set <-y|-n|-c> \n"); exit(1); } if (!strcmp("-y", argv[1])) { dry_run = 0; } else if (!strcmp("-c", argv[1])) { dry_run = 2; } start_kib = strtol(argv[2], NULL, 10); length_kib = strtol(argv[3], NULL, 10); device = argv[4]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } /* assert ENH_ATTRIBUTE_EN */ if (!(ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & EXT_CSD_ENH_ATTRIBUTE_EN)) { printf(" Device cannot have enhanced tech.\n"); exit(1); } /* assert not PARTITION_SETTING_COMPLETED */ if (ext_csd[EXT_CSD_PARTITION_SETTING_COMPLETED]) { printf(" Device is already partitioned\n"); exit(1); } align = 512l * get_hc_wp_grp_size(ext_csd) * get_hc_erase_grp_size(ext_csd); enh_size_mult = (length_kib + align/2l) / align; enh_start_addr = start_kib * (1024 / (is_blockaddresed(ext_csd) ? 512 : 1)); enh_start_addr /= align; enh_start_addr *= align; /* set EXT_CSD_ERASE_GROUP_DEF bit 0 */ ret = write_extcsd_value(fd, EXT_CSD_ERASE_GROUP_DEF, 0x1, 0); if (ret) { fprintf(stderr, "Could not write 0x1 to " "EXT_CSD[%d] in %s\n", EXT_CSD_ERASE_GROUP_DEF, device); exit(1); } /* write to ENH_START_ADDR and ENH_SIZE_MULT and PARTITIONS_ATTRIBUTE's ENH_USR bit */ value = (enh_start_addr >> 24) & 0xff; ret = write_extcsd_value(fd, EXT_CSD_ENH_START_ADDR_3, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_ENH_START_ADDR_3, device); exit(1); } value = (enh_start_addr >> 16) & 0xff; ret = write_extcsd_value(fd, EXT_CSD_ENH_START_ADDR_2, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_ENH_START_ADDR_2, device); exit(1); } value = (enh_start_addr >> 8) & 0xff; ret = write_extcsd_value(fd, EXT_CSD_ENH_START_ADDR_1, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_ENH_START_ADDR_1, device); exit(1); } value = enh_start_addr & 0xff; ret = write_extcsd_value(fd, EXT_CSD_ENH_START_ADDR_0, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_ENH_START_ADDR_0, device); exit(1); } value = (enh_size_mult >> 16) & 0xff; ret = write_extcsd_value(fd, EXT_CSD_ENH_SIZE_MULT_2, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_ENH_SIZE_MULT_2, device); exit(1); } value = (enh_size_mult >> 8) & 0xff; ret = write_extcsd_value(fd, EXT_CSD_ENH_SIZE_MULT_1, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_ENH_SIZE_MULT_1, device); exit(1); } value = enh_size_mult & 0xff; ret = write_extcsd_value(fd, EXT_CSD_ENH_SIZE_MULT_0, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to " "EXT_CSD[%d] in %s\n", value, EXT_CSD_ENH_SIZE_MULT_0, device); exit(1); } value = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] | EXT_CSD_ENH_USR; ret = write_extcsd_value(fd, EXT_CSD_PARTITIONS_ATTRIBUTE, value, 0); if (ret) { fprintf(stderr, "Could not write EXT_CSD_ENH_USR to " "EXT_CSD[%d] in %s\n", EXT_CSD_PARTITIONS_ATTRIBUTE, device); exit(1); } ret = check_enhanced_area_total_limit(device, fd); if (ret) exit(1); printf("Done setting ENH_USR area on %s\n", device); if (set_partitioning_setting_completed(dry_run, device, fd)) exit(1); return 0; } int do_write_reliability_set(int nargs, char **argv) { __u8 value; __u8 ext_csd[512]; int fd, ret; int dry_run = 1; int partition; char *device; if (nargs != 4) { fprintf(stderr,"Usage: mmc write_reliability set <-y|-n|-c> \n"); exit(1); } if (!strcmp("-y", argv[1])) { dry_run = 0; } else if (!strcmp("-c", argv[1])) { dry_run = 2; } partition = strtol(argv[2], NULL, 10); device = argv[3]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } /* assert not PARTITION_SETTING_COMPLETED */ if (ext_csd[EXT_CSD_PARTITION_SETTING_COMPLETED]) { printf(" Device is already partitioned\n"); exit(1); } /* assert HS_CTRL_REL */ if (!(ext_csd[EXT_CSD_WR_REL_PARAM] & HS_CTRL_REL)) { printf("Cannot set write reliability parameters, WR_REL_SET is " "read-only\n"); exit(1); } value = ext_csd[EXT_CSD_WR_REL_SET] | (1<\n"); exit(1); } device = argv[1]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } ext_csd_rev = ext_csd[EXT_CSD_REV]; switch (ext_csd_rev) { case 8: str = "5.1"; break; case 7: str = "5.0"; break; case 6: str = "4.5"; break; case 5: str = "4.41"; break; case 3: str = "4.3"; break; case 2: str = "4.2"; break; case 1: str = "4.1"; break; case 0: str = "4.0"; break; default: goto out_free; } printf("=============================================\n"); printf(" Extended CSD rev 1.%d (MMC %s)\n", ext_csd_rev, str); printf("=============================================\n\n"); if (ext_csd_rev < 3) goto out_free; /* No ext_csd */ /* Parse the Extended CSD registers. * Reserved bit should be read as "0" in case of spec older * than A441. */ reg = ext_csd[EXT_CSD_S_CMD_SET]; printf("Card Supported Command sets [S_CMD_SET: 0x%02x]\n", reg); if (!reg) printf(" - Standard MMC command sets\n"); reg = ext_csd[EXT_CSD_HPI_FEATURE]; printf("HPI Features [HPI_FEATURE: 0x%02x]: ", reg); if (reg & EXT_CSD_HPI_SUPP) { if (reg & EXT_CSD_HPI_IMPL) printf("implementation based on CMD12\n"); else printf("implementation based on CMD13\n"); } printf("Background operations support [BKOPS_SUPPORT: 0x%02x]\n", ext_csd[502]); if (ext_csd_rev >= 6) { printf("Max Packet Read Cmd [MAX_PACKED_READS: 0x%02x]\n", ext_csd[501]); printf("Max Packet Write Cmd [MAX_PACKED_WRITES: 0x%02x]\n", ext_csd[500]); printf("Data TAG support [DATA_TAG_SUPPORT: 0x%02x]\n", ext_csd[499]); printf("Data TAG Unit Size [TAG_UNIT_SIZE: 0x%02x]\n", ext_csd[498]); printf("Tag Resources Size [TAG_RES_SIZE: 0x%02x]\n", ext_csd[497]); printf("Context Management Capabilities" " [CONTEXT_CAPABILITIES: 0x%02x]\n", ext_csd[496]); printf("Large Unit Size [LARGE_UNIT_SIZE_M1: 0x%02x]\n", ext_csd[495]); printf("Extended partition attribute support" " [EXT_SUPPORT: 0x%02x]\n", ext_csd[494]); printf("Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x%02x]\n", ext_csd[248]); printf("Power off notification [POWER_OFF_LONG_TIME: 0x%02x]\n", ext_csd[247]); printf("Cache Size [CACHE_SIZE] is %d KiB\n", (ext_csd[249] << 0 | (ext_csd[250] << 8) | (ext_csd[251] << 16) | (ext_csd[252] << 24)) / 8); } /* A441: Reserved [501:247] A43: reserved [246:229] */ if (ext_csd_rev >= 5) { printf("Background operations status" " [BKOPS_STATUS: 0x%02x]\n", ext_csd[246]); /* CORRECTLY_PRG_SECTORS_NUM [245:242] TODO */ printf("1st Initialisation Time after programmed sector" " [INI_TIMEOUT_AP: 0x%02x]\n", ext_csd[241]); /* A441: reserved [240] */ printf("Power class for 52MHz, DDR at 3.6V" " [PWR_CL_DDR_52_360: 0x%02x]\n", ext_csd[239]); printf("Power class for 52MHz, DDR at 1.95V" " [PWR_CL_DDR_52_195: 0x%02x]\n", ext_csd[238]); /* A441: reserved [237-236] */ if (ext_csd_rev >= 6) { printf("Power class for 200MHz at 3.6V" " [PWR_CL_200_360: 0x%02x]\n", ext_csd[237]); printf("Power class for 200MHz, at 1.95V" " [PWR_CL_200_195: 0x%02x]\n", ext_csd[236]); } printf("Minimum Performance for 8bit at 52MHz in DDR mode:\n"); printf(" [MIN_PERF_DDR_W_8_52: 0x%02x]\n", ext_csd[235]); printf(" [MIN_PERF_DDR_R_8_52: 0x%02x]\n", ext_csd[234]); /* A441: reserved [233] */ printf("TRIM Multiplier [TRIM_MULT: 0x%02x]\n", ext_csd[232]); printf("Secure Feature support [SEC_FEATURE_SUPPORT: 0x%02x]\n", ext_csd[231]); } if (ext_csd_rev == 5) { /* Obsolete in 4.5 */ printf("Secure Erase Multiplier [SEC_ERASE_MULT: 0x%02x]\n", ext_csd[230]); printf("Secure TRIM Multiplier [SEC_TRIM_MULT: 0x%02x]\n", ext_csd[229]); } reg = ext_csd[EXT_CSD_BOOT_INFO]; printf("Boot Information [BOOT_INFO: 0x%02x]\n", reg); if (reg & EXT_CSD_BOOT_INFO_ALT) printf(" Device supports alternative boot method\n"); if (reg & EXT_CSD_BOOT_INFO_DDR_DDR) printf(" Device supports dual data rate during boot\n"); if (reg & EXT_CSD_BOOT_INFO_HS_MODE) printf(" Device supports high speed timing during boot\n"); /* A441/A43: reserved [227] */ printf("Boot partition size [BOOT_SIZE_MULTI: 0x%02x]\n", ext_csd[226]); printf("Access size [ACC_SIZE: 0x%02x]\n", ext_csd[225]); reg = get_hc_erase_grp_size(ext_csd); printf("High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x%02x]\n", reg); printf(" i.e. %u KiB\n", 512 * reg); printf("High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x%02x]\n", ext_csd[223]); printf("Reliable write sector count [REL_WR_SEC_C: 0x%02x]\n", ext_csd[222]); reg = get_hc_wp_grp_size(ext_csd); printf("High-capacity W protect group size [HC_WP_GRP_SIZE: 0x%02x]\n", reg); printf(" i.e. %lu KiB\n", 512l * get_hc_erase_grp_size(ext_csd) * reg); printf("Sleep current (VCC) [S_C_VCC: 0x%02x]\n", ext_csd[220]); printf("Sleep current (VCCQ) [S_C_VCCQ: 0x%02x]\n", ext_csd[219]); /* A441/A43: reserved [218] */ printf("Sleep/awake timeout [S_A_TIMEOUT: 0x%02x]\n", ext_csd[217]); /* A441/A43: reserved [216] */ unsigned int sectors = get_sector_count(ext_csd); printf("Sector Count [SEC_COUNT: 0x%08x]\n", sectors); if (is_blockaddresed(ext_csd)) printf(" Device is block-addressed\n"); else printf(" Device is NOT block-addressed\n"); /* A441/A43: reserved [211] */ printf("Minimum Write Performance for 8bit:\n"); printf(" [MIN_PERF_W_8_52: 0x%02x]\n", ext_csd[210]); printf(" [MIN_PERF_R_8_52: 0x%02x]\n", ext_csd[209]); printf(" [MIN_PERF_W_8_26_4_52: 0x%02x]\n", ext_csd[208]); printf(" [MIN_PERF_R_8_26_4_52: 0x%02x]\n", ext_csd[207]); printf("Minimum Write Performance for 4bit:\n"); printf(" [MIN_PERF_W_4_26: 0x%02x]\n", ext_csd[206]); printf(" [MIN_PERF_R_4_26: 0x%02x]\n", ext_csd[205]); /* A441/A43: reserved [204] */ printf("Power classes registers:\n"); printf(" [PWR_CL_26_360: 0x%02x]\n", ext_csd[203]); printf(" [PWR_CL_52_360: 0x%02x]\n", ext_csd[202]); printf(" [PWR_CL_26_195: 0x%02x]\n", ext_csd[201]); printf(" [PWR_CL_52_195: 0x%02x]\n", ext_csd[200]); /* A43: reserved [199:198] */ if (ext_csd_rev >= 5) { printf("Partition switching timing " "[PARTITION_SWITCH_TIME: 0x%02x]\n", ext_csd[199]); printf("Out-of-interrupt busy timing" " [OUT_OF_INTERRUPT_TIME: 0x%02x]\n", ext_csd[198]); } /* A441/A43: reserved [197] [195] [193] [190] [188] * [186] [184] [182] [180] [176] */ if (ext_csd_rev >= 6) printf("I/O Driver Strength [DRIVER_STRENGTH: 0x%02x]\n", ext_csd[197]); /* DEVICE_TYPE in A45, CARD_TYPE in A441 */ reg = ext_csd[196]; printf("Card Type [CARD_TYPE: 0x%02x]\n", reg); if (reg & 0x80) printf(" HS400 Dual Data Rate eMMC @200MHz 1.2VI/O\n"); if (reg & 0x40) printf(" HS400 Dual Data Rate eMMC @200MHz 1.8VI/O\n"); if (reg & 0x20) printf(" HS200 Single Data Rate eMMC @200MHz 1.2VI/O\n"); if (reg & 0x10) printf(" HS200 Single Data Rate eMMC @200MHz 1.8VI/O\n"); if (reg & 0x08) printf(" HS Dual Data Rate eMMC @52MHz 1.2VI/O\n"); if (reg & 0x04) printf(" HS Dual Data Rate eMMC @52MHz 1.8V or 3VI/O\n"); if (reg & 0x02) printf(" HS eMMC @52MHz - at rated device voltage(s)\n"); if (reg & 0x01) printf(" HS eMMC @26MHz - at rated device voltage(s)\n"); printf("CSD structure version [CSD_STRUCTURE: 0x%02x]\n", ext_csd[194]); /* ext_csd_rev = ext_csd[EXT_CSD_REV] (already done!!!) */ printf("Command set [CMD_SET: 0x%02x]\n", ext_csd[191]); printf("Command set revision [CMD_SET_REV: 0x%02x]\n", ext_csd[189]); printf("Power class [POWER_CLASS: 0x%02x]\n", ext_csd[187]); printf("High-speed interface timing [HS_TIMING: 0x%02x]\n", ext_csd[185]); if (ext_csd_rev >= 8) printf("Enhanced Strobe mode [STROBE_SUPPORT: 0x%02x]\n", ext_csd[184]); /* bus_width: ext_csd[183] not readable */ printf("Erased memory content [ERASED_MEM_CONT: 0x%02x]\n", ext_csd[181]); reg = ext_csd[EXT_CSD_BOOT_CFG]; printf("Boot configuration bytes [PARTITION_CONFIG: 0x%02x]\n", reg); switch ((reg & EXT_CSD_BOOT_CFG_EN)>>3) { case 0x0: printf(" Not boot enable\n"); break; case 0x1: printf(" Boot Partition 1 enabled\n"); break; case 0x2: printf(" Boot Partition 2 enabled\n"); break; case 0x7: printf(" User Area Enabled for boot\n"); break; } switch (reg & EXT_CSD_BOOT_CFG_ACC) { case 0x0: printf(" No access to boot partition\n"); break; case 0x1: printf(" R/W Boot Partition 1\n"); break; case 0x2: printf(" R/W Boot Partition 2\n"); break; case 0x3: printf(" R/W Replay Protected Memory Block (RPMB)\n"); break; default: printf(" Access to General Purpose partition %d\n", (reg & EXT_CSD_BOOT_CFG_ACC) - 3); break; } printf("Boot config protection [BOOT_CONFIG_PROT: 0x%02x]\n", ext_csd[178]); printf("Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x%02x]\n", ext_csd[177]); printf("High-density erase group definition" " [ERASE_GROUP_DEF: 0x%02x]\n", ext_csd[EXT_CSD_ERASE_GROUP_DEF]); print_writeprotect_boot_status(ext_csd); if (ext_csd_rev >= 5) { /* A441]: reserved [172] */ printf("User area write protection register" " [USER_WP]: 0x%02x\n", ext_csd[171]); /* A441]: reserved [170] */ printf("FW configuration [FW_CONFIG]: 0x%02x\n", ext_csd[169]); printf("RPMB Size [RPMB_SIZE_MULT]: 0x%02x\n", ext_csd[168]); reg = ext_csd[EXT_CSD_WR_REL_SET]; const char * const fast = "existing data is at risk if a power " "failure occurs during a write operation"; const char * const reliable = "the device protects existing " "data if a power failure occurs during a write " "operation"; printf("Write reliability setting register" " [WR_REL_SET]: 0x%02x\n", reg); printf(" user area: %s\n", (reg & (1<<0)) ? reliable : fast); int i; for (i = 1; i <= 4; i++) { printf(" partition %d: %s\n", i, (reg & (1<= 6) { int j; /* tcase_support ext_csd[132] not readable */ printf("Periodic Wake-up [PERIODIC_WAKEUP]: 0x%02x\n", ext_csd[131]); printf("Program CID/CSD in DDR mode support" " [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x%02x\n", ext_csd[130]); for (j = 127; j >= 64; j--) printf("Vendor Specific Fields" " [VENDOR_SPECIFIC_FIELD[%d]]: 0x%02x\n", j, ext_csd[j]); printf("Native sector size [NATIVE_SECTOR_SIZE]: 0x%02x\n", ext_csd[63]); printf("Sector size emulation [USE_NATIVE_SECTOR]: 0x%02x\n", ext_csd[62]); printf("Sector size [DATA_SECTOR_SIZE]: 0x%02x\n", ext_csd[61]); printf("1st initialization after disabling sector" " size emulation [INI_TIMEOUT_EMU]: 0x%02x\n", ext_csd[60]); printf("Class 6 commands control [CLASS_6_CTRL]: 0x%02x\n", ext_csd[59]); printf("Number of addressed group to be Released" "[DYNCAP_NEEDED]: 0x%02x\n", ext_csd[58]); printf("Exception events control" " [EXCEPTION_EVENTS_CTRL]: 0x%04x\n", (ext_csd[57] << 8) | ext_csd[56]); printf("Exception events status" "[EXCEPTION_EVENTS_STATUS]: 0x%04x\n", (ext_csd[55] << 8) | ext_csd[54]); printf("Extended Partitions Attribute" " [EXT_PARTITIONS_ATTRIBUTE]: 0x%04x\n", (ext_csd[53] << 8) | ext_csd[52]); for (j = 51; j >= 37; j--) printf("Context configuration" " [CONTEXT_CONF[%d]]: 0x%02x\n", j, ext_csd[j]); printf("Packed command status" " [PACKED_COMMAND_STATUS]: 0x%02x\n", ext_csd[36]); printf("Packed command failure index" " [PACKED_FAILURE_INDEX]: 0x%02x\n", ext_csd[35]); printf("Power Off Notification" " [POWER_OFF_NOTIFICATION]: 0x%02x\n", ext_csd[34]); printf("Control to turn the Cache ON/OFF" " [CACHE_CTRL]: 0x%02x\n", ext_csd[33]); /* flush_cache ext_csd[32] not readable */ printf("Control to turn the Cache Barrier ON/OFF" " [BARRIER_CTRL]: 0x%02x\n", ext_csd[31]); /*Reserved [30:0] */ } if (ext_csd_rev >= 7) { printf("eMMC Firmware Version: %.8s\n", (char*)&ext_csd[EXT_CSD_FIRMWARE_VERSION]); printf("eMMC Life Time Estimation A [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A]: 0x%02x\n", ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A]); printf("eMMC Life Time Estimation B [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B]: 0x%02x\n", ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B]); printf("eMMC Pre EOL information [EXT_CSD_PRE_EOL_INFO]: 0x%02x\n", ext_csd[EXT_CSD_PRE_EOL_INFO]); reg = ext_csd[EXT_CSD_SECURE_REMOVAL_TYPE]; printf("Secure Removal Type [SECURE_REMOVAL_TYPE]: 0x%02x\n", reg); printf(" information is configured to be removed "); /* Bit [5:4]: Configure Secure Removal Type */ switch ((reg & EXT_CSD_CONFIG_SECRM_TYPE) >> 4) { case 0x0: printf("by an erase of the physical memory\n"); break; case 0x1: printf("by an overwriting the addressed locations" " with a character followed by an erase\n"); break; case 0x2: printf("by an overwriting the addressed locations" " with a character, its complement, then a random character\n"); break; case 0x3: printf("using a vendor defined\n"); break; } /* Bit [3:0]: Supported Secure Removal Type */ printf(" Supported Secure Removal Type:\n"); if (reg & 0x01) printf(" information removed by an erase of the physical memory\n"); if (reg & 0x02) printf(" information removed by an overwriting the addressed locations" " with a character followed by an erase\n"); if (reg & 0x04) printf(" information removed by an overwriting the addressed locations" " with a character, its complement, then a random character\n"); if (reg & 0x08) printf(" information removed using a vendor defined\n"); } if (ext_csd_rev >= 8) { printf("Command Queue Support [CMDQ_SUPPORT]: 0x%02x\n", ext_csd[EXT_CSD_CMDQ_SUPPORT]); printf("Command Queue Depth [CMDQ_DEPTH]: %u\n", (ext_csd[EXT_CSD_CMDQ_DEPTH] & 0x1f) + 1); printf("Command Enabled [CMDQ_MODE_EN]: 0x%02x\n", ext_csd[EXT_CSD_CMDQ_MODE_EN]); printf("Note: CMDQ_MODE_EN may not indicate the runtime CMDQ ON or OFF.\n" "Please check sysfs node '/sys/devices/.../mmc_host/mmcX/mmcX:XXXX/cmdq_en'\n"); } out_free: return ret; } int do_write_extcsd(int nargs, char **argv) { int fd, ret; int offset, value; char *device; if (nargs != 4) { fprintf(stderr, "Usage: mmc extcsd write \n"); exit(1); } offset = strtol(argv[1], NULL, 0); value = strtol(argv[2], NULL, 0); device = argv[3]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = write_extcsd_value(fd, offset, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", value, offset, device); exit(1); } return ret; } int do_sanitize(int nargs, char **argv) { int fd, ret; char *device; unsigned int timeout = 0; if (nargs != 2 && nargs != 3) { fprintf(stderr, "Usage: mmc sanitize [timeout_in_ms]\n"); exit(1); } if (nargs == 3) timeout = strtol(argv[2], NULL, 10); device = argv[1]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = write_extcsd_value(fd, EXT_CSD_SANITIZE_START, 1, timeout); if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", 1, EXT_CSD_SANITIZE_START, device); exit(1); } close(fd); return ret; } #define DO_IO(func, fd, buf, nbyte) \ ({ \ ssize_t ret = 0, r; \ do { \ r = func(fd, buf + ret, nbyte - ret); \ if (r < 0 && errno != EINTR) { \ ret = -1; \ break; \ } \ else if (r > 0) \ ret += r; \ } while (r != 0 && (size_t)ret != nbyte); \ \ ret; \ }) #define RPMB_MULTI_CMD_MAX_CMDS 3 enum rpmb_op_type { MMC_RPMB_WRITE_KEY = 0x01, MMC_RPMB_READ_CNT = 0x02, MMC_RPMB_WRITE = 0x03, MMC_RPMB_READ = 0x04, /* For internal usage only, do not use it directly */ MMC_RPMB_READ_RESP = 0x05 }; struct rpmb_frame { u_int8_t stuff[196]; u_int8_t key_mac[32]; u_int8_t data[256]; u_int8_t nonce[16]; u_int32_t write_counter; u_int16_t addr; u_int16_t block_count; u_int16_t result; u_int16_t req_resp; }; static inline void set_single_cmd(struct mmc_ioc_cmd *ioc, __u32 opcode, int write_flag, unsigned int blocks) { ioc->opcode = opcode; ioc->write_flag = write_flag; ioc->arg = 0x0; ioc->blksz = 512; ioc->blocks = blocks; ioc->flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; } /* Performs RPMB operation. * * @fd: RPMB device on which we should perform ioctl command * @frame_in: input RPMB frame, should be properly inited * @frame_out: output (result) RPMB frame. Caller is responsible for checking * result and req_resp for output frame. * @out_cnt: count of outer frames. Used only for multiple blocks reading, * in the other cases -EINVAL will be returned. */ static int do_rpmb_op(int fd, const struct rpmb_frame *frame_in, struct rpmb_frame *frame_out, unsigned int out_cnt) { int err; u_int16_t rpmb_type; struct mmc_ioc_multi_cmd *mioc; struct mmc_ioc_cmd *ioc; struct rpmb_frame frame_status; memset(&frame_status, 0, sizeof(frame_status)); if (!frame_in || !frame_out || !out_cnt) return -EINVAL; /* prepare arguments for MMC_IOC_MULTI_CMD ioctl */ mioc = (struct mmc_ioc_multi_cmd *) calloc(1, sizeof (struct mmc_ioc_multi_cmd) + RPMB_MULTI_CMD_MAX_CMDS * sizeof (struct mmc_ioc_cmd)); if (!mioc) { return -ENOMEM; } rpmb_type = be16toh(frame_in->req_resp); switch(rpmb_type) { case MMC_RPMB_WRITE: case MMC_RPMB_WRITE_KEY: if (out_cnt != 1) { err = -EINVAL; goto out; } mioc->num_of_cmds = 3; /* Write request */ ioc = &mioc->cmds[0]; set_single_cmd(ioc, MMC_WRITE_MULTIPLE_BLOCK, (1 << 31) | 1, 1); mmc_ioc_cmd_set_data((*ioc), frame_in); /* Result request */ ioc = &mioc->cmds[1]; frame_status.req_resp = htobe16(MMC_RPMB_READ_RESP); set_single_cmd(ioc, MMC_WRITE_MULTIPLE_BLOCK, 1, 1); mmc_ioc_cmd_set_data((*ioc), &frame_status); /* Get response */ ioc = &mioc->cmds[2]; set_single_cmd(ioc, MMC_READ_MULTIPLE_BLOCK, 0, 1); mmc_ioc_cmd_set_data((*ioc), frame_out); break; case MMC_RPMB_READ_CNT: if (out_cnt != 1) { err = -EINVAL; goto out; } /* fall through */ case MMC_RPMB_READ: mioc->num_of_cmds = 2; /* Read request */ ioc = &mioc->cmds[0]; set_single_cmd(ioc, MMC_WRITE_MULTIPLE_BLOCK, 1, 1); mmc_ioc_cmd_set_data((*ioc), frame_in); /* Get response */ ioc = &mioc->cmds[1]; set_single_cmd(ioc, MMC_READ_MULTIPLE_BLOCK, 0, out_cnt); mmc_ioc_cmd_set_data((*ioc), frame_out); break; default: err = -EINVAL; goto out; } err = ioctl(fd, MMC_IOC_MULTI_CMD, mioc); out: free(mioc); return err; } int do_rpmb_write_key(int nargs, char **argv) { int ret, dev_fd, key_fd; struct rpmb_frame frame_in = { .req_resp = htobe16(MMC_RPMB_WRITE_KEY) }, frame_out; if (nargs != 3) { fprintf(stderr, "Usage: mmc rpmb write-key \n"); exit(1); } dev_fd = open(argv[1], O_RDWR); if (dev_fd < 0) { perror("device open"); exit(1); } if (0 == strcmp(argv[2], "-")) key_fd = STDIN_FILENO; else { key_fd = open(argv[2], O_RDONLY); if (key_fd < 0) { perror("can't open key file"); exit(1); } } /* Read the auth key */ ret = DO_IO(read, key_fd, frame_in.key_mac, sizeof(frame_in.key_mac)); if (ret < 0) { perror("read the key"); exit(1); } else if (ret != sizeof(frame_in.key_mac)) { printf("Auth key must be %lu bytes length, but we read only %d, exit\n", (unsigned long)sizeof(frame_in.key_mac), ret); exit(1); } /* Execute RPMB op */ ret = do_rpmb_op(dev_fd, &frame_in, &frame_out, 1); if (ret != 0) { perror("RPMB ioctl failed"); exit(1); } /* Check RPMB response */ if (frame_out.result != 0) { printf("RPMB operation failed, retcode 0x%04x\n", be16toh(frame_out.result)); exit(1); } close(dev_fd); if (key_fd != STDIN_FILENO) close(key_fd); return ret; } int rpmb_read_counter(int dev_fd, unsigned int *cnt) { int ret; struct rpmb_frame frame_in = { .req_resp = htobe16(MMC_RPMB_READ_CNT) }, frame_out; /* Execute RPMB op */ ret = do_rpmb_op(dev_fd, &frame_in, &frame_out, 1); if (ret != 0) { perror("RPMB ioctl failed"); exit(1); } /* Check RPMB response */ if (frame_out.result != 0) { *cnt = 0; return be16toh(frame_out.result); } *cnt = be32toh(frame_out.write_counter); return 0; } int do_rpmb_read_counter(int nargs, char **argv) { int ret, dev_fd; unsigned int cnt; if (nargs != 2) { fprintf(stderr, "Usage: mmc rpmb read-counter \n"); exit(1); } dev_fd = open(argv[1], O_RDWR); if (dev_fd < 0) { perror("device open"); exit(1); } ret = rpmb_read_counter(dev_fd, &cnt); /* Check RPMB response */ if (ret != 0) { printf("RPMB operation failed, retcode 0x%04x\n", ret); exit(1); } close(dev_fd); printf("Counter value: 0x%08x\n", cnt); return ret; } int do_rpmb_read_block(int nargs, char **argv) { int i, ret, dev_fd, data_fd, key_fd = -1; uint16_t addr; /* * for reading RPMB, number of blocks is set by CMD23 only, the packet * frame field for that is set to 0. So, the type is not u16 but uint! */ unsigned int blocks_cnt; unsigned char key[32]; struct rpmb_frame frame_in = { .req_resp = htobe16(MMC_RPMB_READ), }, *frame_out_p; if (nargs != 5 && nargs != 6) { fprintf(stderr, "Usage: mmc rpmb read-block
[/path/to/key]\n"); exit(1); } dev_fd = open(argv[1], O_RDWR); if (dev_fd < 0) { perror("device open"); exit(1); } /* Get block address */ errno = 0; addr = strtol(argv[2], NULL, 0); if (errno) { perror("incorrect address"); exit(1); } frame_in.addr = htobe16(addr); /* Get blocks count */ errno = 0; blocks_cnt = strtol(argv[3], NULL, 0); if (errno) { perror("incorrect blocks count"); exit(1); } if (!blocks_cnt) { printf("please, specify valid blocks count number\n"); exit(1); } frame_out_p = calloc(sizeof(*frame_out_p), blocks_cnt); if (!frame_out_p) { printf("can't allocate memory for RPMB outer frames\n"); exit(1); } /* Write 256b data */ if (0 == strcmp(argv[4], "-")) data_fd = STDOUT_FILENO; else { data_fd = open(argv[4], O_WRONLY | O_CREAT | O_APPEND, S_IRUSR | S_IWUSR); if (data_fd < 0) { perror("can't open output file"); exit(1); } } /* Key is specified */ if (nargs == 6) { if (0 == strcmp(argv[5], "-")) key_fd = STDIN_FILENO; else { key_fd = open(argv[5], O_RDONLY); if (key_fd < 0) { perror("can't open input key file"); exit(1); } } ret = DO_IO(read, key_fd, key, sizeof(key)); if (ret < 0) { perror("read the key data"); exit(1); } else if (ret != sizeof(key)) { printf("Data must be %lu bytes length, but we read only %d, exit\n", (unsigned long)sizeof(key), ret); exit(1); } } /* Execute RPMB op */ ret = do_rpmb_op(dev_fd, &frame_in, frame_out_p, blocks_cnt); if (ret != 0) { perror("RPMB ioctl failed"); exit(1); } /* Check RPMB response */ if (frame_out_p[blocks_cnt - 1].result != 0) { printf("RPMB operation failed, retcode 0x%04x\n", be16toh(frame_out_p[blocks_cnt - 1].result)); exit(1); } /* Do we have to verify data against key? */ if (nargs == 6) { unsigned char mac[32]; hmac_sha256_ctx ctx; struct rpmb_frame *frame_out = NULL; hmac_sha256_init(&ctx, key, sizeof(key)); for (i = 0; i < blocks_cnt; i++) { frame_out = &frame_out_p[i]; hmac_sha256_update(&ctx, frame_out->data, sizeof(*frame_out) - offsetof(struct rpmb_frame, data)); } hmac_sha256_final(&ctx, mac, sizeof(mac)); /* Impossible */ assert(frame_out); /* Compare calculated MAC and MAC from last frame */ if (memcmp(mac, frame_out->key_mac, sizeof(mac))) { printf("RPMB MAC missmatch\n"); exit(1); } } /* Write data */ for (i = 0; i < blocks_cnt; i++) { struct rpmb_frame *frame_out = &frame_out_p[i]; ret = DO_IO(write, data_fd, frame_out->data, sizeof(frame_out->data)); if (ret < 0) { perror("write the data"); exit(1); } else if (ret != sizeof(frame_out->data)) { printf("Data must be %lu bytes length, but we wrote only %d, exit\n", (unsigned long)sizeof(frame_out->data), ret); exit(1); } } free(frame_out_p); close(dev_fd); if (data_fd != STDOUT_FILENO) close(data_fd); if (key_fd != -1 && key_fd != STDIN_FILENO) close(key_fd); return ret; } int do_rpmb_write_block(int nargs, char **argv) { int ret, dev_fd, key_fd, data_fd; unsigned char key[32]; uint16_t addr; unsigned int cnt; struct rpmb_frame frame_in = { .req_resp = htobe16(MMC_RPMB_WRITE), .block_count = htobe16(1) }, frame_out; if (nargs != 5) { fprintf(stderr, "Usage: mmc rpmb write-block
\n"); exit(1); } dev_fd = open(argv[1], O_RDWR); if (dev_fd < 0) { perror("device open"); exit(1); } ret = rpmb_read_counter(dev_fd, &cnt); /* Check RPMB response */ if (ret != 0) { printf("RPMB read counter operation failed, retcode 0x%04x\n", ret); exit(1); } frame_in.write_counter = htobe32(cnt); /* Get block address */ errno = 0; addr = strtol(argv[2], NULL, 0); if (errno) { perror("incorrect address"); exit(1); } frame_in.addr = htobe16(addr); /* Read 256b data */ if (0 == strcmp(argv[3], "-")) data_fd = STDIN_FILENO; else { data_fd = open(argv[3], O_RDONLY); if (data_fd < 0) { perror("can't open input file"); exit(1); } } ret = DO_IO(read, data_fd, frame_in.data, sizeof(frame_in.data)); if (ret < 0) { perror("read the data"); exit(1); } else if (ret != sizeof(frame_in.data)) { printf("Data must be %lu bytes length, but we read only %d, exit\n", (unsigned long)sizeof(frame_in.data), ret); exit(1); } /* Read the auth key */ if (0 == strcmp(argv[4], "-")) key_fd = STDIN_FILENO; else { key_fd = open(argv[4], O_RDONLY); if (key_fd < 0) { perror("can't open key file"); exit(1); } } ret = DO_IO(read, key_fd, key, sizeof(key)); if (ret < 0) { perror("read the key"); exit(1); } else if (ret != sizeof(key)) { printf("Auth key must be %lu bytes length, but we read only %d, exit\n", (unsigned long)sizeof(key), ret); exit(1); } /* Calculate HMAC SHA256 */ hmac_sha256( key, sizeof(key), frame_in.data, sizeof(frame_in) - offsetof(struct rpmb_frame, data), frame_in.key_mac, sizeof(frame_in.key_mac)); /* Execute RPMB op */ ret = do_rpmb_op(dev_fd, &frame_in, &frame_out, 1); if (ret != 0) { perror("RPMB ioctl failed"); exit(1); } /* Check RPMB response */ if (frame_out.result != 0) { printf("RPMB operation failed, retcode 0x%04x\n", be16toh(frame_out.result)); exit(1); } close(dev_fd); if (data_fd != STDIN_FILENO) close(data_fd); if (key_fd != STDIN_FILENO) close(key_fd); return ret; } int do_cache_ctrl(int value, int nargs, char **argv) { __u8 ext_csd[512]; int fd, ret; char *device; if (nargs != 2) { fprintf(stderr, "Usage: mmc cache enable \n"); exit(1); } device = argv[1]; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); exit(1); } if (ext_csd[EXT_CSD_REV] < EXT_CSD_REV_V4_5) { fprintf(stderr, "The CACHE option is only availabe on devices >= " "MMC 4.5 %s\n", device); exit(1); } /* If the cache size is zero, this device does not have a cache */ if (!(ext_csd[EXT_CSD_CACHE_SIZE_3] || ext_csd[EXT_CSD_CACHE_SIZE_2] || ext_csd[EXT_CSD_CACHE_SIZE_1] || ext_csd[EXT_CSD_CACHE_SIZE_0])) { fprintf(stderr, "The CACHE option is not available on %s\n", device); exit(1); } ret = write_extcsd_value(fd, EXT_CSD_CACHE_CTRL, value, 0); if (ret) { fprintf(stderr, "Could not write 0x%02x to EXT_CSD[%d] in %s\n", value, EXT_CSD_CACHE_CTRL, device); exit(1); } close(fd); return ret; } int do_cache_en(int nargs, char **argv) { return do_cache_ctrl(1, nargs, argv); } int do_cache_dis(int nargs, char **argv) { return do_cache_ctrl(0, nargs, argv); } static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end) { int ret = 0; struct mmc_ioc_multi_cmd *multi_cmd; __u8 ext_csd[512]; ret = read_extcsd(dev_fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD\n"); exit(1); } if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) { fprintf(stderr, "High Capacity Erase Unit Size=%d bytes\n" \ "High Capacity Erase Timeout=%d ms\n" \ "High Capacity Write Protect Group Size=%d bytes\n", ext_csd[224]*0x80000, ext_csd[223]*300, ext_csd[221]*ext_csd[224]*0x80000); } multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + 3 * sizeof(struct mmc_ioc_cmd)); if (!multi_cmd) { perror("Failed to allocate memory"); return -ENOMEM; } multi_cmd->num_of_cmds = 3; /* Set erase start address */ multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START; multi_cmd->cmds[0].arg = start; multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; multi_cmd->cmds[0].write_flag = 1; /* Set erase end address */ multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END; multi_cmd->cmds[1].arg = end; multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; multi_cmd->cmds[1].write_flag = 1; /* Send Erase Command */ multi_cmd->cmds[2].opcode = MMC_ERASE; multi_cmd->cmds[2].arg = argin; multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255; multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; multi_cmd->cmds[2].write_flag = 1; /* send erase cmd with multi-cmd */ ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd); if (ret) perror("Erase multi-cmd ioctl"); /* Does not work for SPI cards */ if (multi_cmd->cmds[1].response[0] & R1_ERASE_PARAM) { fprintf(stderr, "Erase start response: 0x%08x\n", multi_cmd->cmds[0].response[0]); ret = -EIO; } if (multi_cmd->cmds[2].response[0] & R1_ERASE_SEQ_ERROR) { fprintf(stderr, "Erase response: 0x%08x\n", multi_cmd->cmds[2].response[0]); ret = -EIO; } free(multi_cmd); return ret; } int do_erase(int nargs, char **argv) { int dev_fd, ret; char *print_str; __u8 ext_csd[512], checkup_mask = 0; __u32 arg, start, end; if (nargs != 5) { fprintf(stderr, "Usage: erase \n"); exit(1); } if (strstr(argv[2], "0x") || strstr(argv[2], "0X")) start = strtol(argv[2], NULL, 16); else start = strtol(argv[2], NULL, 10); if (strstr(argv[3], "0x") || strstr(argv[3], "0X")) end = strtol(argv[3], NULL, 16); else end = strtol(argv[3], NULL, 10); if (end < start) { fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n", start, end); exit(1); } if (strcmp(argv[1], "legacy") == 0) { arg = 0x00000000; print_str = "Legacy Erase"; } else if (strcmp(argv[1], "discard") == 0) { arg = 0x00000003; print_str = "Discard"; } else if (strcmp(argv[1], "secure-erase") == 0) { print_str = "Secure Erase"; checkup_mask = EXT_CSD_SEC_ER_EN; arg = 0x80000000; } else if (strcmp(argv[1], "secure-trim1") == 0) { print_str = "Secure Trim Step 1"; checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN; arg = 0x80000001; } else if (strcmp(argv[1], "secure-trim2") == 0) { print_str = "Secure Trim Step 2"; checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN; arg = 0x80008000; } else if (strcmp(argv[1], "trim") == 0) { print_str = "Trim"; checkup_mask = EXT_CSD_SEC_GB_CL_EN; arg = 0x00000001; } else { fprintf(stderr, "Unknown erase type: %s\n", argv[1]); exit(1); } dev_fd = open(argv[4], O_RDWR); if (dev_fd < 0) { perror(argv[4]); exit(1); } if (checkup_mask) { ret = read_extcsd(dev_fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", argv[4]); goto out; } if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) != checkup_mask) { fprintf(stderr, "%s is not supported in %s\n", print_str, argv[4]); ret = -ENOTSUP; goto out; } } printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end); ret = erase(dev_fd, arg, start, end); out: printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed"); close(dev_fd); return ret; } int do_ffu(int nargs, char **argv) { int dev_fd, img_fd; int sect_done = 0, retry = 3, ret = -EINVAL; unsigned int sect_size; __u8 ext_csd[512]; __u8 *buf = NULL; __u32 arg; off_t fw_size; char *device; struct mmc_ioc_multi_cmd *multi_cmd = NULL; if (nargs != 3) { fprintf(stderr, "Usage: ffu \n"); exit(1); } device = argv[2]; dev_fd = open(device, O_RDWR); if (dev_fd < 0) { perror("device open failed"); exit(1); } img_fd = open(argv[1], O_RDONLY); if (img_fd < 0) { perror("image open failed"); close(dev_fd); exit(1); } ret = read_extcsd(dev_fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); goto out; } if (ext_csd[EXT_CSD_REV] < EXT_CSD_REV_V5_0) { fprintf(stderr, "The FFU feature is only available on devices >= " "MMC 5.0, not supported in %s\n", device); goto out; } if (!(ext_csd[EXT_CSD_SUPPORTED_MODES] & EXT_CSD_FFU)) { fprintf(stderr, "FFU is not supported in %s\n", device); goto out; } if (ext_csd[EXT_CSD_FW_CONFIG] & EXT_CSD_UPDATE_DISABLE) { fprintf(stderr, "Firmware update was disabled in %s\n", device); goto out; } fw_size = lseek(img_fd, 0, SEEK_END); if (fw_size > MMC_IOC_MAX_BYTES || fw_size == 0) { fprintf(stderr, "Wrong firmware size"); goto out; } /* allocate maximum required */ buf = malloc(fw_size); multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + 4 * sizeof(struct mmc_ioc_cmd)); if (!buf || !multi_cmd) { perror("failed to allocate memory"); goto out; } /* ensure fw is multiple of native sector size */ sect_size = (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 0) ? 512 : 4096; if (fw_size % sect_size) { fprintf(stderr, "Firmware data size (%jd) is not aligned!\n", (intmax_t)fw_size); goto out; } /* set CMD ARG */ arg = ext_csd[EXT_CSD_FFU_ARG_0] | ext_csd[EXT_CSD_FFU_ARG_1] << 8 | ext_csd[EXT_CSD_FFU_ARG_2] << 16 | ext_csd[EXT_CSD_FFU_ARG_3] << 24; /* prepare multi_cmd for FFU based on cmd to be used */ /* prepare multi_cmd to be sent */ multi_cmd->num_of_cmds = 4; /* put device into ffu mode */ fill_switch_cmd(&multi_cmd->cmds[0], EXT_CSD_MODE_CONFIG, EXT_CSD_FFU_MODE); /* send block count */ multi_cmd->cmds[1].opcode = MMC_SET_BLOCK_COUNT; multi_cmd->cmds[1].arg = fw_size / 512; multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; /* send image chunk */ multi_cmd->cmds[2].opcode = MMC_WRITE_MULTIPLE_BLOCK; /* * blksz and blocks essentially do not matter, as long as the product * is fw_size, but some hosts don't handle larger blksz well. */ multi_cmd->cmds[2].blksz = 512; multi_cmd->cmds[2].blocks = fw_size / 512; multi_cmd->cmds[2].arg = arg; multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; multi_cmd->cmds[2].write_flag = 1; mmc_ioc_cmd_set_data(multi_cmd->cmds[2], buf); /* return device into normal mode */ fill_switch_cmd(&multi_cmd->cmds[3], EXT_CSD_MODE_CONFIG, EXT_CSD_NORMAL_MODE); /* read firmware */ lseek(img_fd, 0, SEEK_SET); if (read(img_fd, buf, fw_size) != fw_size) { perror("Could not read the firmware file: "); ret = -ENOSPC; goto out; } do_retry: /* send ioctl with multi-cmd */ ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd); if (ret) { perror("Multi-cmd ioctl"); /* In case multi-cmd ioctl failed before exiting from ffu mode */ ioctl(dev_fd, MMC_IOC_CMD, &multi_cmd->cmds[3]); goto out; } /* * By spec - check if mode operation codes are supported in ffu features, * if not then skip checking number of sectors programmed after install */ if (!ext_csd[EXT_CSD_FFU_FEATURES]) { fprintf(stderr, "Please reboot to complete firmware installation on %s\n", device); ret = 0; goto out; } ret = read_extcsd(dev_fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); goto out; } /* Test if we need to restart the download */ sect_done = ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG_0] | ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG_1] << 8 | ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG_2] << 16 | ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG_3] << 24; /* By spec, host should re-start download from the first sector if sect_done is 0 */ if (sect_done == 0) { if (retry--) { fprintf(stderr, "Programming failed. Retrying... (%d)\n", retry); goto do_retry; } fprintf(stderr, "Programming failed! Aborting...\n"); goto out; } if ((sect_done * sect_size) == fw_size) { fprintf(stderr, "Programmed %jd/%jd bytes\n", (intmax_t)fw_size, (intmax_t)fw_size); fprintf(stderr, "Programming finished with status %d \n", ret); } else { fprintf(stderr, "FW size and number of sectors written mismatch. Status return %d\n", ret); goto out; } fprintf(stderr, "Installing firmware on %s...\n", device); /* Re-enter ffu mode and install the firmware */ multi_cmd->num_of_cmds = 2; /* set ext_csd to install mode */ fill_switch_cmd(&multi_cmd->cmds[1], EXT_CSD_MODE_OPERATION_CODES, EXT_CSD_FFU_INSTALL); /* send ioctl with multi-cmd */ ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd); if (ret) { perror("Multi-cmd ioctl failed setting install mode"); /* In case multi-cmd ioctl failed before exiting from ffu mode */ ioctl(dev_fd, MMC_IOC_CMD, &multi_cmd->cmds[3]); goto out; } ret = read_extcsd(dev_fd, ext_csd); if (ret) { fprintf(stderr, "Could not read EXT_CSD from %s\n", device); goto out; } /* return status */ ret = ext_csd[EXT_CSD_FFU_STATUS]; if (ret) { fprintf(stderr, "%s: error %d during FFU install:\n", device, ret); goto out; } else { fprintf(stderr, "FFU finished successfully\n"); } out: free(buf); free(multi_cmd); close(img_fd); close(dev_fd); return ret; } int do_general_cmd_read(int nargs, char **argv) { int dev_fd; char *device; char *endptr; __u8 buf[512]; __u32 arg = 0x01; int ret = -EINVAL, i; struct mmc_ioc_cmd idata; if (nargs != 2 && nargs != 3) { fprintf(stderr, "Usage: gen_cmd read [arg]\n"); exit(1); } device = argv[1]; dev_fd = open(device, O_RDWR); if (dev_fd < 0) { perror("device open failed"); exit(1); } /* arg is specified */ if (nargs == 3) { arg = strtol(argv[2], &endptr, 16); if (errno != 0 || *endptr != '\0' || !(arg & 0x1)) { fprintf(stderr, "Wrong ARG, it should be Hex number and bit0 must be 1\n"); goto out; } } memset(&idata, 0, sizeof(idata)); idata.write_flag = 0; idata.opcode = MMC_GEN_CMD; idata.arg = arg; idata.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; idata.blksz = 512; idata.blocks = 1; mmc_ioc_cmd_set_data(idata, buf); ret = ioctl(dev_fd, MMC_IOC_CMD, &idata); if (ret) { perror("ioctl"); goto out; } printf("Data:\n"); for (i = 0; i < 512; i++) { printf("%2x ", buf[i]); if ((i + 1) % 16 == 0) printf("\n"); } out: close(dev_fd); return ret; } static void issue_cmd0(char *device, __u32 arg) { struct mmc_ioc_cmd idata; int fd; fd = open(device, O_RDWR); if (fd < 0) { perror("open"); exit(1); } memset(&idata, 0, sizeof(idata)); idata.opcode = MMC_GO_IDLE_STATE; idata.arg = arg; idata.flags = MMC_RSP_NONE | MMC_CMD_BC; /* No need to check for error, it is expected */ ioctl(fd, MMC_IOC_CMD, &idata); close(fd); } int do_softreset(int nargs, char **argv) { char *device; if (nargs != 2) { fprintf(stderr, "Usage: mmc softreset \n"); exit(1); } device = argv[1]; issue_cmd0(device, MMC_GO_IDLE_STATE_ARG); return 0; } int do_preidle(int nargs, char **argv) { char *device; if (nargs != 2) { fprintf(stderr, "Usage: mmc preidle \n"); exit(1); } device = argv[1]; issue_cmd0(device, MMC_GO_PRE_IDLE_STATE_ARG); return 0; } int do_alt_boot_op(int nargs, char **argv) { int fd, ret, boot_data_fd; char *device, *boot_data_file; struct mmc_ioc_multi_cmd *mioc; __u8 ext_csd[512]; __u8 *boot_buf; unsigned int boot_blocks, ext_csd_boot_size; if (nargs != 3) { fprintf(stderr, "Usage: mmc boot_op \n"); exit(1); } boot_data_file = argv[1]; device = argv[2]; fd = open(device, O_RDWR); if (fd < 0) { perror("open device"); exit(1); } ret = read_extcsd(fd, ext_csd); if (ret) { perror("read extcsd"); goto dev_fd_close; } if (!(ext_csd[EXT_CSD_BOOT_INFO] & EXT_CSD_BOOT_INFO_ALT)) { ret = -EINVAL; perror("Card does not support alternative boot mode"); goto dev_fd_close; } if (ext_csd[EXT_CSD_PART_CONFIG] & EXT_CSD_PART_CONFIG_ACC_ACK) { ret = -EINVAL; perror("Boot Ack must not be enabled"); goto dev_fd_close; } ext_csd_boot_size = ext_csd[EXT_CSD_BOOT_MULT] * 128 * 1024; boot_blocks = ext_csd_boot_size / 512; if (ext_csd_boot_size > MMC_IOC_MAX_BYTES) { printf("Boot partition size is bigger than IOCTL limit, limiting to 512K\n"); boot_blocks = MMC_IOC_MAX_BYTES / 512; } boot_data_fd = open(boot_data_file, O_WRONLY | O_CREAT, 0644); if (boot_data_fd < 0) { perror("open boot data file"); ret = 1; goto boot_data_close; } boot_buf = calloc(1, sizeof(__u8) * boot_blocks * 512); mioc = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + 2 * sizeof(struct mmc_ioc_cmd)); if (!mioc || !boot_buf) { perror("Failed to allocate memory"); ret = -ENOMEM; goto alloced_error; } mioc->num_of_cmds = 2; mioc->cmds[0].opcode = MMC_GO_IDLE_STATE; mioc->cmds[0].arg = MMC_GO_PRE_IDLE_STATE_ARG; mioc->cmds[0].flags = MMC_RSP_NONE | MMC_CMD_AC; mioc->cmds[0].write_flag = 0; mioc->cmds[1].opcode = MMC_GO_IDLE_STATE; mioc->cmds[1].arg = MMC_BOOT_INITIATION_ARG; mioc->cmds[1].flags = MMC_RSP_NONE | MMC_CMD_ADTC; mioc->cmds[1].write_flag = 0; mioc->cmds[1].blksz = 512; mioc->cmds[1].blocks = boot_blocks; /* Access time of boot part differs wildly, spec mandates 1s */ mioc->cmds[1].data_timeout_ns = 2 * 1000 * 1000 * 1000; mmc_ioc_cmd_set_data(mioc->cmds[1], boot_buf); ret = ioctl(fd, MMC_IOC_MULTI_CMD, mioc); if (ret) { perror("multi-cmd ioctl error\n"); goto alloced_error; } ret = DO_IO(write, boot_data_fd, boot_buf, boot_blocks * 512); if (ret < 0) { perror("Write error\n"); goto alloced_error; } ret = 0; alloced_error: if (mioc) free(mioc); if (boot_buf) free(boot_buf); boot_data_close: close(boot_data_fd); dev_fd_close: close(fd); if (ret) exit(1); return 0; }