mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-14 15:54:15 +08:00
ffe60fcfda
In case of a probe error, it is possible to abort after issuing clk_prepare_enable(). Ensure the clock is disabled and unprepared in that case. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
594 lines
15 KiB
C
594 lines
15 KiB
C
/*
|
|
* "RTT as Real Time Clock" driver for AT91SAM9 SoC family
|
|
*
|
|
* (C) 2007 Michel Benoit
|
|
*
|
|
* Based on rtc-at91rm9200.c by Rick Bronson
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/time.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_data/atmel.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/clk.h>
|
|
|
|
/*
|
|
* This driver uses two configurable hardware resources that live in the
|
|
* AT91SAM9 backup power domain (intended to be powered at all times)
|
|
* to implement the Real Time Clock interfaces
|
|
*
|
|
* - A "Real-time Timer" (RTT) counts up in seconds from a base time.
|
|
* We can't assign the counter value (CRTV) ... but we can reset it.
|
|
*
|
|
* - One of the "General Purpose Backup Registers" (GPBRs) holds the
|
|
* base time, normally an offset from the beginning of the POSIX
|
|
* epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the
|
|
* local timezone's offset.
|
|
*
|
|
* The RTC's value is the RTT counter plus that offset. The RTC's alarm
|
|
* is likewise a base (ALMV) plus that offset.
|
|
*
|
|
* Not all RTTs will be used as RTCs; some systems have multiple RTTs to
|
|
* choose from, or a "real" RTC module. All systems have multiple GPBR
|
|
* registers available, likewise usable for more than "RTC" support.
|
|
*/
|
|
|
|
#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
|
|
#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
|
|
#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
|
|
#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
|
|
#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
|
|
|
|
#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
|
|
#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
|
|
|
|
#define AT91_RTT_VR 0x08 /* Real-time Value Register */
|
|
#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
|
|
|
|
#define AT91_RTT_SR 0x0c /* Real-time Status Register */
|
|
#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
|
|
#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
|
|
|
|
/*
|
|
* We store ALARM_DISABLED in ALMV to record that no alarm is set.
|
|
* It's also the reset value for that field.
|
|
*/
|
|
#define ALARM_DISABLED ((u32)~0)
|
|
|
|
|
|
struct sam9_rtc {
|
|
void __iomem *rtt;
|
|
struct rtc_device *rtcdev;
|
|
u32 imr;
|
|
struct regmap *gpbr;
|
|
unsigned int gpbr_offset;
|
|
int irq;
|
|
struct clk *sclk;
|
|
bool suspended;
|
|
unsigned long events;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
#define rtt_readl(rtc, field) \
|
|
readl((rtc)->rtt + AT91_RTT_ ## field)
|
|
#define rtt_writel(rtc, field, val) \
|
|
writel((val), (rtc)->rtt + AT91_RTT_ ## field)
|
|
|
|
static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
|
|
{
|
|
unsigned int val;
|
|
|
|
regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
|
|
|
|
return val;
|
|
}
|
|
|
|
static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
|
|
{
|
|
regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
|
|
}
|
|
|
|
/*
|
|
* Read current time and date in RTC
|
|
*/
|
|
static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
u32 secs, secs2;
|
|
u32 offset;
|
|
|
|
/* read current time offset */
|
|
offset = gpbr_readl(rtc);
|
|
if (offset == 0)
|
|
return -EILSEQ;
|
|
|
|
/* reread the counter to help sync the two clock domains */
|
|
secs = rtt_readl(rtc, VR);
|
|
secs2 = rtt_readl(rtc, VR);
|
|
if (secs != secs2)
|
|
secs = rtt_readl(rtc, VR);
|
|
|
|
rtc_time_to_tm(offset + secs, tm);
|
|
|
|
dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
|
|
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
|
|
tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set current time and date in RTC
|
|
*/
|
|
static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
int err;
|
|
u32 offset, alarm, mr;
|
|
unsigned long secs;
|
|
|
|
dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
|
|
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
|
|
tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
|
|
err = rtc_tm_to_time(tm, &secs);
|
|
if (err != 0)
|
|
return err;
|
|
|
|
mr = rtt_readl(rtc, MR);
|
|
|
|
/* disable interrupts */
|
|
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
|
|
|
|
/* read current time offset */
|
|
offset = gpbr_readl(rtc);
|
|
|
|
/* store the new base time in a battery backup register */
|
|
secs += 1;
|
|
gpbr_writel(rtc, secs);
|
|
|
|
/* adjust the alarm time for the new base */
|
|
alarm = rtt_readl(rtc, AR);
|
|
if (alarm != ALARM_DISABLED) {
|
|
if (offset > secs) {
|
|
/* time jumped backwards, increase time until alarm */
|
|
alarm += (offset - secs);
|
|
} else if ((alarm + offset) > secs) {
|
|
/* time jumped forwards, decrease time until alarm */
|
|
alarm -= (secs - offset);
|
|
} else {
|
|
/* time jumped past the alarm, disable alarm */
|
|
alarm = ALARM_DISABLED;
|
|
mr &= ~AT91_RTT_ALMIEN;
|
|
}
|
|
rtt_writel(rtc, AR, alarm);
|
|
}
|
|
|
|
/* reset the timer, and re-enable interrupts */
|
|
rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
struct rtc_time *tm = &alrm->time;
|
|
u32 alarm = rtt_readl(rtc, AR);
|
|
u32 offset;
|
|
|
|
offset = gpbr_readl(rtc);
|
|
if (offset == 0)
|
|
return -EILSEQ;
|
|
|
|
memset(alrm, 0, sizeof(*alrm));
|
|
if (alarm != ALARM_DISABLED && offset != 0) {
|
|
rtc_time_to_tm(offset + alarm, tm);
|
|
|
|
dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
|
|
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
|
|
tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
|
|
if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
|
|
alrm->enabled = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
struct rtc_time *tm = &alrm->time;
|
|
unsigned long secs;
|
|
u32 offset;
|
|
u32 mr;
|
|
int err;
|
|
|
|
err = rtc_tm_to_time(tm, &secs);
|
|
if (err != 0)
|
|
return err;
|
|
|
|
offset = gpbr_readl(rtc);
|
|
if (offset == 0) {
|
|
/* time is not set */
|
|
return -EILSEQ;
|
|
}
|
|
mr = rtt_readl(rtc, MR);
|
|
rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
|
|
|
|
/* alarm in the past? finish and leave disabled */
|
|
if (secs <= offset) {
|
|
rtt_writel(rtc, AR, ALARM_DISABLED);
|
|
return 0;
|
|
}
|
|
|
|
/* else set alarm and maybe enable it */
|
|
rtt_writel(rtc, AR, secs - offset);
|
|
if (alrm->enabled)
|
|
rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
|
|
|
|
dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
|
|
tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
|
|
tm->tm_min, tm->tm_sec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
u32 mr = rtt_readl(rtc, MR);
|
|
|
|
dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr);
|
|
if (enabled)
|
|
rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
|
|
else
|
|
rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Provide additional RTC information in /proc/driver/rtc
|
|
*/
|
|
static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
|
|
{
|
|
struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
u32 mr = mr = rtt_readl(rtc, MR);
|
|
|
|
seq_printf(seq, "update_IRQ\t: %s\n",
|
|
(mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t at91_rtc_cache_events(struct sam9_rtc *rtc)
|
|
{
|
|
u32 sr, mr;
|
|
|
|
/* Shared interrupt may be for another device. Note: reading
|
|
* SR clears it, so we must only read it in this irq handler!
|
|
*/
|
|
mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
|
|
sr = rtt_readl(rtc, SR) & (mr >> 16);
|
|
if (!sr)
|
|
return IRQ_NONE;
|
|
|
|
/* alarm status */
|
|
if (sr & AT91_RTT_ALMS)
|
|
rtc->events |= (RTC_AF | RTC_IRQF);
|
|
|
|
/* timer update/increment */
|
|
if (sr & AT91_RTT_RTTINC)
|
|
rtc->events |= (RTC_UF | RTC_IRQF);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void at91_rtc_flush_events(struct sam9_rtc *rtc)
|
|
{
|
|
if (!rtc->events)
|
|
return;
|
|
|
|
rtc_update_irq(rtc->rtcdev, 1, rtc->events);
|
|
rtc->events = 0;
|
|
|
|
pr_debug("%s: num=%ld, events=0x%02lx\n", __func__,
|
|
rtc->events >> 8, rtc->events & 0x000000FF);
|
|
}
|
|
|
|
/*
|
|
* IRQ handler for the RTC
|
|
*/
|
|
static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
|
|
{
|
|
struct sam9_rtc *rtc = _rtc;
|
|
int ret;
|
|
|
|
spin_lock(&rtc->lock);
|
|
|
|
ret = at91_rtc_cache_events(rtc);
|
|
|
|
/* We're called in suspended state */
|
|
if (rtc->suspended) {
|
|
/* Mask irqs coming from this peripheral */
|
|
rtt_writel(rtc, MR,
|
|
rtt_readl(rtc, MR) &
|
|
~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
|
|
/* Trigger a system wakeup */
|
|
pm_system_wakeup();
|
|
} else {
|
|
at91_rtc_flush_events(rtc);
|
|
}
|
|
|
|
spin_unlock(&rtc->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct rtc_class_ops at91_rtc_ops = {
|
|
.read_time = at91_rtc_readtime,
|
|
.set_time = at91_rtc_settime,
|
|
.read_alarm = at91_rtc_readalarm,
|
|
.set_alarm = at91_rtc_setalarm,
|
|
.proc = at91_rtc_proc,
|
|
.alarm_irq_enable = at91_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static const struct regmap_config gpbr_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
};
|
|
|
|
/*
|
|
* Initialize and install RTC driver
|
|
*/
|
|
static int at91_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *r;
|
|
struct sam9_rtc *rtc;
|
|
int ret, irq;
|
|
u32 mr;
|
|
unsigned int sclk_rate;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "failed to get interrupt resource\n");
|
|
return irq;
|
|
}
|
|
|
|
rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
|
|
if (!rtc)
|
|
return -ENOMEM;
|
|
|
|
rtc->irq = irq;
|
|
|
|
/* platform setup code should have handled this; sigh */
|
|
if (!device_can_wakeup(&pdev->dev))
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
platform_set_drvdata(pdev, rtc);
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
rtc->rtt = devm_ioremap_resource(&pdev->dev, r);
|
|
if (IS_ERR(rtc->rtt))
|
|
return PTR_ERR(rtc->rtt);
|
|
|
|
if (!pdev->dev.of_node) {
|
|
/*
|
|
* TODO: Remove this code chunk when removing non DT board
|
|
* support. Remember to remove the gpbr_regmap_config
|
|
* variable too.
|
|
*/
|
|
void __iomem *gpbr;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
gpbr = devm_ioremap_resource(&pdev->dev, r);
|
|
if (IS_ERR(gpbr))
|
|
return PTR_ERR(gpbr);
|
|
|
|
rtc->gpbr = regmap_init_mmio(NULL, gpbr,
|
|
&gpbr_regmap_config);
|
|
} else {
|
|
struct of_phandle_args args;
|
|
|
|
ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
|
|
"atmel,rtt-rtc-time-reg", 1, 0,
|
|
&args);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rtc->gpbr = syscon_node_to_regmap(args.np);
|
|
rtc->gpbr_offset = args.args[0];
|
|
}
|
|
|
|
if (IS_ERR(rtc->gpbr)) {
|
|
dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rtc->sclk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(rtc->sclk))
|
|
return PTR_ERR(rtc->sclk);
|
|
|
|
sclk_rate = clk_get_rate(rtc->sclk);
|
|
if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
|
|
dev_err(&pdev->dev, "Invalid slow clock rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = clk_prepare_enable(rtc->sclk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Could not enable slow clock\n");
|
|
return ret;
|
|
}
|
|
|
|
mr = rtt_readl(rtc, MR);
|
|
|
|
/* unless RTT is counting at 1 Hz, re-initialize it */
|
|
if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
|
|
mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
|
|
gpbr_writel(rtc, 0);
|
|
}
|
|
|
|
/* disable all interrupts (same as on shutdown path) */
|
|
mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
|
|
rtt_writel(rtc, MR, mr);
|
|
|
|
rtc->rtcdev = devm_rtc_device_register(&pdev->dev, pdev->name,
|
|
&at91_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtc->rtcdev)) {
|
|
ret = PTR_ERR(rtc->rtcdev);
|
|
goto err_clk;
|
|
}
|
|
|
|
/* register irq handler after we know what name we'll use */
|
|
ret = devm_request_irq(&pdev->dev, rtc->irq, at91_rtc_interrupt,
|
|
IRQF_SHARED | IRQF_COND_SUSPEND,
|
|
dev_name(&rtc->rtcdev->dev), rtc);
|
|
if (ret) {
|
|
dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
|
|
goto err_clk;
|
|
}
|
|
|
|
/* NOTE: sam9260 rev A silicon has a ROM bug which resets the
|
|
* RTT on at least some reboots. If you have that chip, you must
|
|
* initialize the time from some external source like a GPS, wall
|
|
* clock, discrete RTC, etc
|
|
*/
|
|
|
|
if (gpbr_readl(rtc) == 0)
|
|
dev_warn(&pdev->dev, "%s: SET TIME!\n",
|
|
dev_name(&rtc->rtcdev->dev));
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
clk_disable_unprepare(rtc->sclk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Disable and remove the RTC driver
|
|
*/
|
|
static int at91_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct sam9_rtc *rtc = platform_get_drvdata(pdev);
|
|
u32 mr = rtt_readl(rtc, MR);
|
|
|
|
/* disable all interrupts */
|
|
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
|
|
|
|
if (!IS_ERR(rtc->sclk))
|
|
clk_disable_unprepare(rtc->sclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_rtc_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct sam9_rtc *rtc = platform_get_drvdata(pdev);
|
|
u32 mr = rtt_readl(rtc, MR);
|
|
|
|
rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
|
|
rtt_writel(rtc, MR, mr & ~rtc->imr);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
/* AT91SAM9 RTC Power management control */
|
|
|
|
static int at91_rtc_suspend(struct device *dev)
|
|
{
|
|
struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
u32 mr = rtt_readl(rtc, MR);
|
|
|
|
/*
|
|
* This IRQ is shared with DBGU and other hardware which isn't
|
|
* necessarily a wakeup event source.
|
|
*/
|
|
rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
|
|
if (rtc->imr) {
|
|
if (device_may_wakeup(dev) && (mr & AT91_RTT_ALMIEN)) {
|
|
unsigned long flags;
|
|
|
|
enable_irq_wake(rtc->irq);
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
rtc->suspended = true;
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
/* don't let RTTINC cause wakeups */
|
|
if (mr & AT91_RTT_RTTINCIEN)
|
|
rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
|
|
} else
|
|
rtt_writel(rtc, MR, mr & ~rtc->imr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_rtc_resume(struct device *dev)
|
|
{
|
|
struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
u32 mr;
|
|
|
|
if (rtc->imr) {
|
|
unsigned long flags;
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(rtc->irq);
|
|
mr = rtt_readl(rtc, MR);
|
|
rtt_writel(rtc, MR, mr | rtc->imr);
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
rtc->suspended = false;
|
|
at91_rtc_cache_events(rtc);
|
|
at91_rtc_flush_events(rtc);
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id at91_rtc_dt_ids[] = {
|
|
{ .compatible = "atmel,at91sam9260-rtt" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
|
|
#endif
|
|
|
|
static struct platform_driver at91_rtc_driver = {
|
|
.probe = at91_rtc_probe,
|
|
.remove = at91_rtc_remove,
|
|
.shutdown = at91_rtc_shutdown,
|
|
.driver = {
|
|
.name = "rtc-at91sam9",
|
|
.pm = &at91_rtc_pm_ops,
|
|
.of_match_table = of_match_ptr(at91_rtc_dt_ids),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(at91_rtc_driver);
|
|
|
|
MODULE_AUTHOR("Michel Benoit");
|
|
MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
|
|
MODULE_LICENSE("GPL");
|