Bruce Allan ff847ac2d3 e1000e: 82577/82578 PHY register access issues ... The MAC-PHY interconnect on 82577/82578 uses a power management feature (called K1) which must be disabled when in 1Gbps due to a hardware issue on these parts. The #define bit setting used to enable/disable K1 is incorrect and can cause PHY register accesses to stop working altogether until the next device reset. This patch sets the register correctly. This issue is present in kernels since 2.6.32. CC: stable@kernel.org Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2010-07-27 21:06:26 -07:00
..
82571.c	drivers/net: Remove unnecessary returns from void function()s	2010-05-14 00:19:28 -07:00
defines.h	e1000e: fix checks for manageability enabled and management pass-through	2010-05-12 23:31:13 -07:00
e1000.h	e1000e: save skb counts in TX to avoid cache misses	2010-05-05 21:11:25 -07:00
es2lan.c	drivers/net: Remove unnecessary returns from void function()s	2010-05-14 00:19:28 -07:00
ethtool.c	e1000e: bad state after running ethtool diagnostics with AMT enabled	2010-05-12 23:31:09 -07:00
hw.h	e1000e: 82577/82578 PHY register access issues	2010-07-27 21:06:26 -07:00
ich8lan.c	drivers/net: Remove unnecessary returns from void function()s	2010-05-14 00:19:28 -07:00
lib.c	e1000e: fix checks for manageability enabled and management pass-through	2010-05-12 23:31:13 -07:00
Makefile	e1000e: reformat comment blocks, cosmetic changes only	2008-03-28 22:14:56 -04:00
netdev.c	e1000e: change logical negate to bitwise	2010-06-03 03:28:21 -07:00
param.c	e1000e: use static params to save stack space (part 2)	2010-05-12 23:31:09 -07:00
phy.c	e1000e: Incorrect function pointer set for force_speed_duplex on 82577	2010-05-12 23:31:12 -07:00