linux/drivers/serial
Maciej W. Rozycki ff11d07803 dz: clean up and improve the setup of termios settings
A set of changes to the way termios settings are propagated to the serial
port hardware.  The DZ11 only supports a selection of fixed baud settings,
so some requests may not be fulfilled.  Keep the old setting in such a case
and failing that resort to 9600bps.  Also add a missing update of the
transmit timeout.  And remove the explicit encoding of the line selected
from writes to the Line Parameters Register as it has been preencoded by
the ->set_termios() call already.  Finally, remove a duplicate macro for
the Receiver Enable bit.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
..
cpm_uart Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
jsm jsm: Remove further unneeded crud 2007-10-17 08:42:52 -07:00
8250_accent.c
8250_acorn.c [ARM] ecard: add ecardm_iomap() / ecardm_iounmap() 2007-05-11 17:19:02 +01:00
8250_au1x00.c
8250_boca.c
8250_early.c serial: fix compile warning about putc 2007-11-05 15:12:32 -08:00
8250_exar_st16c554.c [PATCH] Exar quad port serial 2006-12-07 08:39:35 -08:00
8250_fourport.c
8250_gsc.c [PARISC] Clean up asm-parisc/serial.h 2006-10-04 06:47:03 -06:00
8250_hp300.c serial: add early_serial_setup() back to header file 2007-07-18 08:38:22 -07:00
8250_hub6.c
8250_mca.c
8250_pci.c serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h 2008-02-05 09:44:09 -08:00
8250_pnp.c serial: Coding style 2008-02-05 09:44:10 -08:00
8250.c serial: Coding style 2008-02-05 09:44:10 -08:00
8250.h
21285.c [ARM] 21285 serial: fix build error 2008-02-04 13:14:06 +00:00
68328serial.c m68knommu: use IRQF_DISABLE in m68328serial.c 2008-02-01 21:00:01 +11:00
68328serial.h
68360serial.c 68360serial: remove broken optimisation 2007-07-16 09:05:51 -07:00
amba-pl010.c [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking 2007-06-05 19:39:49 +01:00
amba-pl011.c amba-pl011, rename BIT macro 2007-10-19 11:53:42 -07:00
atmel_serial.c [ARM] 4660/3: at91: allow selecting UART for early kernel messages 2008-02-04 13:16:39 +00:00
bfin_5xx.c [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option 2008-01-22 15:29:18 +08:00
clps711x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
crisv10.c CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
crisv10.h CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
dz.c dz: clean up and improve the setup of termios settings 2008-02-07 08:42:24 -08:00
dz.h dz: clean up and improve the setup of termios settings 2008-02-07 08:42:24 -08:00
icom.c kobject: convert icom to use kref, not kobject 2008-01-24 20:40:09 -08:00
icom.h Coding style fix drivers/serial/icom.h 2008-02-03 14:47:38 +02:00
imx.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
ioc3_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ioc4_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ip22zilog.c IP22ZILOG: fix lockup and sysrq 2007-11-29 09:24:53 -08:00
ip22zilog.h
Kconfig dz: update kconfig description 2008-02-07 08:42:24 -08:00
m32r_sio_reg.h
m32r_sio.c m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
m32r_sio.h m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
Makefile SC26XX: New serial driver for SC2681 uarts 2008-02-06 10:41:06 -08:00
mcf.c m68knommu: use ARRAY_SIZE in ColdFire serial driver 2008-02-05 09:44:21 -08:00
mcfserial.c [PATCH] m68knommu: fix work queues in mcfserial.c driver 2007-03-06 18:08:38 -08:00
mcfserial.h
mpc52xx_uart.c [POWERPC] mpc5200: normalize compatible property bindings 2008-01-26 15:26:01 -07:00
mpsc.c serial: MPSC: set baudrate when BRG divider is set. 2008-02-05 09:44:10 -08:00
mux.c drivers/serial/: Spelling fixes 2008-02-03 17:29:25 +02:00
netx-serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
of_serial.c [POWERPC] of_serial: add port type checking 2007-07-10 21:53:42 +10:00
pmac_zilog.c [POWERPC] Optionally use new device number for pmac_zilog 2007-09-22 14:49:21 +10:00
pmac_zilog.h [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c [PATCH] PNX8550 UART driver 2007-02-14 08:09:52 -08:00
pxa.c [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled 2007-11-26 14:39:12 +00:00
s3c2410.c drivers/serial/s3c2410.c: remove dead config symbols 2008-02-05 09:44:09 -08:00
sa1100.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
sb1250-duart.c BCM1480 serial build fix 2007-09-11 17:21:19 -07:00
sc26xx.c SC26XX: New serial driver for SC2681 uarts 2008-02-06 10:41:06 -08:00
serial_core.c serial: speed setup failure reporting 2008-02-05 09:44:10 -08:00
serial_cs.c pcmcia: replace kio_addr_t with unsigned int everywhere 2008-02-05 09:44:08 -08:00
serial_ks8695.c [ARM] 4411/1: KS8695: Another serial driver fix 2007-05-30 13:15:19 +01:00
serial_lh7a40x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_txx9.c serial: fix serial_txx9 console initialization 2007-10-30 08:06:55 -07:00
sh-sci.c sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sh-sci.h sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sn_console.c sn_console section mismatch warning 2007-07-16 09:05:53 -07:00
suncore.c [SERIAL]: Fix section mismatches in Sun serial console drivers. 2007-12-29 01:19:49 -08:00
suncore.h [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunhv.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.h
sunsu.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.h [SERIAL] sunzilog: Interrupt enable before ISR handler installed 2007-05-09 13:49:04 -07:00
uartlite.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
ucc_uart.c [POWERPC] qe-uart: add support for Freescale QUICCEngine UART 2008-01-23 19:34:12 -06:00
v850e_uart.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
vr41xx_siu.c serial: fix vr41xx_siu serial console support 2007-07-31 15:39:41 -07:00
zs.c zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
zs.h zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00