linux/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
Stefan Agner 1277f80271 drm/fsl-dcu: move layer initialization to plane file
Move the initialization code for layers into a separate function
in the plane file. This allows to reuse the function on resume.
Also move it at the very beginning which may not matter but makes
logically much more sense.

Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-06-18 18:34:22 -07:00

160 lines
4.8 KiB
C

/*
* Copyright 2015 Freescale Semiconductor, Inc.
*
* Freescale DCU drm device driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/clk.h>
#include <linux/regmap.h>
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include "fsl_dcu_drm_crtc.h"
#include "fsl_dcu_drm_drv.h"
#include "fsl_dcu_drm_plane.h"
static void fsl_dcu_drm_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
}
static int fsl_dcu_drm_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
return 0;
}
static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
}
static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
DCU_MODE_DCU_MODE_MASK,
DCU_MODE_DCU_MODE(DCU_MODE_OFF));
regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
DCU_UPDATE_MODE_READREG);
}
static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
DCU_MODE_DCU_MODE_MASK,
DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
DCU_UPDATE_MODE_READREG);
}
static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
struct drm_connector *con = &fsl_dev->connector.base;
struct drm_display_mode *mode = &crtc->state->mode;
unsigned int hbp, hfp, hsw, vbp, vfp, vsw, index, pol = 0;
index = drm_crtc_index(crtc);
clk_set_rate(fsl_dev->pix_clk, mode->clock * 1000);
/* Configure timings: */
hbp = mode->htotal - mode->hsync_end;
hfp = mode->hsync_start - mode->hdisplay;
hsw = mode->hsync_end - mode->hsync_start;
vbp = mode->vtotal - mode->vsync_end;
vfp = mode->vsync_start - mode->vdisplay;
vsw = mode->vsync_end - mode->vsync_start;
/* INV_PXCK as default (most display sample data on rising edge) */
if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE))
pol |= DCU_SYN_POL_INV_PXCK;
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
pol |= DCU_SYN_POL_INV_HS_LOW;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
pol |= DCU_SYN_POL_INV_VS_LOW;
regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
DCU_HSYN_PARA_BP(hbp) |
DCU_HSYN_PARA_PW(hsw) |
DCU_HSYN_PARA_FP(hfp));
regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
DCU_VSYN_PARA_BP(vbp) |
DCU_VSYN_PARA_PW(vsw) |
DCU_VSYN_PARA_FP(vfp));
regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
regmap_write(fsl_dev->regmap, DCU_SYN_POL, pol);
regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
DCU_BGND_G(0) | DCU_BGND_B(0));
regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
DCU_MODE_BLEND_ITER(1) | DCU_MODE_RASTER_EN);
regmap_write(fsl_dev->regmap, DCU_THRESHOLD,
DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) |
DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) |
DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL));
regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
DCU_UPDATE_MODE_READREG);
return;
}
static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs = {
.atomic_begin = fsl_dcu_drm_crtc_atomic_begin,
.atomic_check = fsl_dcu_drm_crtc_atomic_check,
.atomic_flush = fsl_dcu_drm_crtc_atomic_flush,
.disable = fsl_dcu_drm_disable_crtc,
.enable = fsl_dcu_drm_crtc_enable,
.mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb,
};
static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = {
.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
.destroy = drm_crtc_cleanup,
.page_flip = drm_atomic_helper_page_flip,
.reset = drm_atomic_helper_crtc_reset,
.set_config = drm_atomic_helper_set_config,
};
int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
{
struct drm_plane *primary;
struct drm_crtc *crtc = &fsl_dev->crtc;
int ret;
fsl_dcu_drm_init_planes(fsl_dev->drm);
primary = fsl_dcu_drm_primary_create_plane(fsl_dev->drm);
if (!primary)
return -ENOMEM;
ret = drm_crtc_init_with_planes(fsl_dev->drm, crtc, primary, NULL,
&fsl_dcu_drm_crtc_funcs, NULL);
if (ret) {
primary->funcs->destroy(primary);
return ret;
}
drm_crtc_helper_add(crtc, &fsl_dcu_drm_crtc_helper_funcs);
return 0;
}