mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 10:05:00 +08:00
bdea142295
Convert MSM8996 and similar (MSM8998/SDM845) MSS PIL bindings to schema. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117085840.32356-2-quic_sibis@quicinc.com
103 lines
2.8 KiB
Plaintext
103 lines
2.8 KiB
Plaintext
Qualcomm Hexagon Peripheral Image Loader
|
|
|
|
This document defines the binding for a component that loads and boots firmware
|
|
on the Qualcomm Hexagon core.
|
|
|
|
- compatible:
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: must be one of:
|
|
"qcom,ipq8074-wcss-pil"
|
|
"qcom,qcs404-wcss-pil"
|
|
|
|
- reg:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: must specify the base address and size of the qdsp6 and
|
|
rmb register blocks
|
|
|
|
- reg-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: must be "q6dsp" and "rmb"
|
|
|
|
- interrupts-extended:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: reference to the interrupts that match interrupt-names
|
|
|
|
- interrupt-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
|
|
|
|
- clocks:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the clocks that match clock-names
|
|
|
|
- clock-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: The clocks needed depend on the compatible string:
|
|
qcom,ipq8074-wcss-pil:
|
|
no clock names required
|
|
qcom,qcs404-wcss-pil:
|
|
must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr",
|
|
"gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
|
|
"lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
|
|
"lcc_axim_cbc", "lcc_bcr_sleep"
|
|
|
|
- resets:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the list of 3 reset-controllers for the
|
|
wcss sub-system
|
|
|
|
- reset-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
|
|
for the wcss sub-system
|
|
|
|
- memory-region:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to wcss reserved-memory region.
|
|
|
|
For the compatible string below the following supplies are required:
|
|
"qcom,qcs404-wcss-pil"
|
|
- cx-supply:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the regulators to be held on behalf of the
|
|
booting of the Hexagon core
|
|
|
|
- qcom,smem-states:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the smem state for requesting the Hexagon to
|
|
shut down
|
|
|
|
- qcom,smem-state-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: must be "stop"
|
|
|
|
- qcom,halt-regs:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: a phandle reference to a syscon representing TCSR followed
|
|
by the three offsets within syscon for q6, wcss and nc
|
|
halt registers.
|
|
|
|
- memory-region:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the reserved-memory for the region
|
|
|
|
The Hexagon node may also have an subnode named either "smd-edge" or
|
|
"glink-edge" that describes the communication edge, channels and devices
|
|
related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and
|
|
../soc/qcom/qcom,glink.txt for details on how to describe these.
|