linux/drivers/phy
Peter Chen fe5516651e phy: cadence: salvo: add bist fix
Very limited parts may fail to work on full speed mode (both host and
device modes) for USB3 port due to higher threshold in full speed receiver
of USB2.0 PHY.

One example failure symptom is, the enumeration is failed when connecting
full speed USB mouse to USB3 port, especially under high temperature.

The workaround is to configure threshold voltage value of single ended
receiver by setting USB2.0 PHY register AFE_RX_REG5[2:0] to 3'b101.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230517161646.3418250-4-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-19 23:14:06 +05:30
..
allwinner phy: Use of_property_present() for testing DT property presence 2023-03-20 18:14:58 +05:30
amlogic phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit 2023-05-08 14:57:37 +05:30
broadcom phy: Use of_property_present() for testing DT property presence 2023-03-20 18:14:58 +05:30
cadence phy: cadence: salvo: add bist fix 2023-05-19 23:14:06 +05:30
freescale phy: freescale: imx8m-pcie: Use devm_platform_ioremap_resource() 2023-05-16 19:51:24 +05:30
hisilicon phy: hisilicon: Allow building phy-hisi-inno-usb2 on ARM32 2023-05-16 19:44:29 +05:30
ingenic phy: ingenic: Fix a typo in ingenic_usb_phy_probe() 2021-03-30 23:35:17 +05:30
intel phy-for-6.4 2023-05-03 11:17:34 -07:00
lantiq phy: lantiq: rcu-usb2: wait after clock enable 2021-01-13 19:29:03 +05:30
marvell phy: marvell: drop of_match_ptr for ID table 2023-03-20 18:14:59 +05:30
mediatek phy: mediatek: hdmi: mt8195: fix wrong pll calculus 2023-05-04 23:12:11 +05:30
microchip phy: sparx5-serdes: add skip_cmu_cfg check when configuring lanes 2023-05-08 17:13:01 +05:30
motorola phy: motorola: phy-mapphone-mdm6600: Convert to platform remove callback returning void 2023-03-20 18:14:56 +05:30
mscc phy: phy-ocelot-serdes: add ability to be used in a non-syscon configuration 2023-03-20 09:08:48 +00:00
qualcomm phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding 2023-05-17 13:44:02 +05:30
ralink phy: ralink: mt7621-pci: add sentinel to quirks table 2022-11-05 13:01:25 +05:30
renesas phy: renesas: r8a779f0-ether-serdes: Convert to platform remove callback returning void 2023-03-20 18:14:57 +05:30
rockchip phy: rockchip: remove unused hw_to_inno function 2023-04-12 21:47:50 +05:30
samsung phy: Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB" 2023-05-16 19:38:39 +05:30
socionext phy: uniphier-usb3ss: fix unintended writing zeros to PHY register 2021-12-24 10:06:38 +05:30
st phy: stm32-usphyc: add 200 to 300 us delay to fix timeout on some machines 2023-03-31 18:59:16 +05:30
sunplus phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe() 2023-01-12 23:43:35 +05:30
tegra phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port 2023-04-12 21:51:42 +05:30
ti phy: ti: gmii-sel: Enable USXGMII mode for J784S4 2023-05-16 20:01:44 +05:30
xilinx phy: xilinx: phy-zynqmp: mention SGMII as supported protocol 2023-03-31 19:08:48 +05:30
Kconfig phy: xgene: Depend on ARCH_XGENE rather than plain arm64 2023-03-20 18:14:59 +05:30
Makefile phy: usb: Add USB2.0 phy driver for Sunplus SP7021 2022-09-02 21:01:24 +05:30
phy-can-transceiver.c phy: fixes for 6.2 2023-02-14 19:25:45 +05:30
phy-core-mipi-dphy.c phy: dphy: add support to calculate the timing based on hs_clk_rate 2022-10-27 14:38:04 +03:00
phy-core.c driver core: class: remove module * from class_create() 2023-03-17 15:16:33 +01:00
phy-lgm-usb.c phy: phy-lgm-usb: Convert to platform remove callback returning void 2023-03-20 18:14:56 +05:30
phy-lpc18xx-usb-otg.c
phy-pistachio-usb.c
phy-xgene.c phy: phy-xgene.c: Fix alignment of comment 2021-05-31 14:08:55 +05:30