mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 03:24:55 +08:00
f5ac2b9eb5
The problem: "iwconfig ethX power on" returns error The cause: "ps_supported" flag was never set for SD8385/8686 The fix: check firmware capabilities returned by GET_HW_SPEC command. Set "ps_supported" to 1 if FW_CAPINFO_PS bit is on. This fix applies to SDIO interface only. Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
397 lines
12 KiB
C
397 lines
12 KiB
C
/**
|
|
* This header file contains global constant/enum definitions,
|
|
* global variable declaration.
|
|
*/
|
|
#ifndef _LBS_DEFS_H_
|
|
#define _LBS_DEFS_H_
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#ifdef CONFIG_LIBERTAS_DEBUG
|
|
#define DEBUG
|
|
#define PROC_DEBUG
|
|
#endif
|
|
|
|
#ifndef DRV_NAME
|
|
#define DRV_NAME "libertas"
|
|
#endif
|
|
|
|
|
|
#define LBS_DEB_ENTER 0x00000001
|
|
#define LBS_DEB_LEAVE 0x00000002
|
|
#define LBS_DEB_MAIN 0x00000004
|
|
#define LBS_DEB_NET 0x00000008
|
|
#define LBS_DEB_MESH 0x00000010
|
|
#define LBS_DEB_WEXT 0x00000020
|
|
#define LBS_DEB_IOCTL 0x00000040
|
|
#define LBS_DEB_SCAN 0x00000080
|
|
#define LBS_DEB_ASSOC 0x00000100
|
|
#define LBS_DEB_JOIN 0x00000200
|
|
#define LBS_DEB_11D 0x00000400
|
|
#define LBS_DEB_DEBUGFS 0x00000800
|
|
#define LBS_DEB_ETHTOOL 0x00001000
|
|
#define LBS_DEB_HOST 0x00002000
|
|
#define LBS_DEB_CMD 0x00004000
|
|
#define LBS_DEB_RX 0x00008000
|
|
#define LBS_DEB_TX 0x00010000
|
|
#define LBS_DEB_USB 0x00020000
|
|
#define LBS_DEB_CS 0x00040000
|
|
#define LBS_DEB_FW 0x00080000
|
|
#define LBS_DEB_THREAD 0x00100000
|
|
#define LBS_DEB_HEX 0x00200000
|
|
#define LBS_DEB_SDIO 0x00400000
|
|
#define LBS_DEB_SYSFS 0x00800000
|
|
#define LBS_DEB_SPI 0x01000000
|
|
|
|
extern unsigned int lbs_debug;
|
|
|
|
#ifdef DEBUG
|
|
#define LBS_DEB_LL(grp, grpnam, fmt, args...) \
|
|
do { if ((lbs_debug & (grp)) == (grp)) \
|
|
printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \
|
|
in_interrupt() ? " (INT)" : "", ## args); } while (0)
|
|
#else
|
|
#define LBS_DEB_LL(grp, grpnam, fmt, args...) do {} while (0)
|
|
#endif
|
|
|
|
#define lbs_deb_enter(grp) \
|
|
LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s()\n", __func__);
|
|
#define lbs_deb_enter_args(grp, fmt, args...) \
|
|
LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s(" fmt ")\n", __func__, ## args);
|
|
#define lbs_deb_leave(grp) \
|
|
LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s()\n", __func__);
|
|
#define lbs_deb_leave_args(grp, fmt, args...) \
|
|
LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s(), " fmt "\n", \
|
|
__func__, ##args);
|
|
#define lbs_deb_main(fmt, args...) LBS_DEB_LL(LBS_DEB_MAIN, " main", fmt, ##args)
|
|
#define lbs_deb_net(fmt, args...) LBS_DEB_LL(LBS_DEB_NET, " net", fmt, ##args)
|
|
#define lbs_deb_mesh(fmt, args...) LBS_DEB_LL(LBS_DEB_MESH, " mesh", fmt, ##args)
|
|
#define lbs_deb_wext(fmt, args...) LBS_DEB_LL(LBS_DEB_WEXT, " wext", fmt, ##args)
|
|
#define lbs_deb_ioctl(fmt, args...) LBS_DEB_LL(LBS_DEB_IOCTL, " ioctl", fmt, ##args)
|
|
#define lbs_deb_scan(fmt, args...) LBS_DEB_LL(LBS_DEB_SCAN, " scan", fmt, ##args)
|
|
#define lbs_deb_assoc(fmt, args...) LBS_DEB_LL(LBS_DEB_ASSOC, " assoc", fmt, ##args)
|
|
#define lbs_deb_join(fmt, args...) LBS_DEB_LL(LBS_DEB_JOIN, " join", fmt, ##args)
|
|
#define lbs_deb_11d(fmt, args...) LBS_DEB_LL(LBS_DEB_11D, " 11d", fmt, ##args)
|
|
#define lbs_deb_debugfs(fmt, args...) LBS_DEB_LL(LBS_DEB_DEBUGFS, " debugfs", fmt, ##args)
|
|
#define lbs_deb_ethtool(fmt, args...) LBS_DEB_LL(LBS_DEB_ETHTOOL, " ethtool", fmt, ##args)
|
|
#define lbs_deb_host(fmt, args...) LBS_DEB_LL(LBS_DEB_HOST, " host", fmt, ##args)
|
|
#define lbs_deb_cmd(fmt, args...) LBS_DEB_LL(LBS_DEB_CMD, " cmd", fmt, ##args)
|
|
#define lbs_deb_rx(fmt, args...) LBS_DEB_LL(LBS_DEB_RX, " rx", fmt, ##args)
|
|
#define lbs_deb_tx(fmt, args...) LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args)
|
|
#define lbs_deb_fw(fmt, args...) LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args)
|
|
#define lbs_deb_usb(fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args)
|
|
#define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args)
|
|
#define lbs_deb_cs(fmt, args...) LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args)
|
|
#define lbs_deb_thread(fmt, args...) LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args)
|
|
#define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
|
|
#define lbs_deb_sysfs(fmt, args...) LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
|
|
#define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
|
|
|
|
#define lbs_pr_info(format, args...) \
|
|
printk(KERN_INFO DRV_NAME": " format, ## args)
|
|
#define lbs_pr_err(format, args...) \
|
|
printk(KERN_ERR DRV_NAME": " format, ## args)
|
|
#define lbs_pr_alert(format, args...) \
|
|
printk(KERN_ALERT DRV_NAME": " format, ## args)
|
|
|
|
#ifdef DEBUG
|
|
static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len)
|
|
{
|
|
int i = 0;
|
|
|
|
if (len &&
|
|
(lbs_debug & LBS_DEB_HEX) &&
|
|
(lbs_debug & grp))
|
|
{
|
|
for (i = 1; i <= len; i++) {
|
|
if ((i & 0xf) == 1) {
|
|
if (i != 1)
|
|
printk("\n");
|
|
printk(DRV_NAME " %s: ", prompt);
|
|
}
|
|
printk("%02x ", (u8) * buf);
|
|
buf++;
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
#else
|
|
#define lbs_deb_hex(grp,prompt,buf,len) do {} while (0)
|
|
#endif
|
|
|
|
|
|
|
|
/** Buffer Constants */
|
|
|
|
/* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
|
|
* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
|
|
* driver has more local TxPDs. Each TxPD on the host memory is associated
|
|
* with a Tx control node. The driver maintains 8 RxPD descriptors for
|
|
* station firmware to store Rx packet information.
|
|
*
|
|
* Current version of MAC has a 32x6 multicast address buffer.
|
|
*
|
|
* 802.11b can have up to 14 channels, the driver keeps the
|
|
* BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
|
|
*/
|
|
|
|
#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
|
|
#define LBS_NUM_CMD_BUFFERS 10
|
|
#define LBS_CMD_BUFFER_SIZE (2 * 1024)
|
|
#define MRVDRV_MAX_CHANNEL_SIZE 14
|
|
#define MRVDRV_ASSOCIATION_TIME_OUT 255
|
|
#define MRVDRV_SNAP_HEADER_LEN 8
|
|
|
|
#define LBS_UPLD_SIZE 2312
|
|
#define DEV_NAME_LEN 32
|
|
|
|
/* Wake criteria for HOST_SLEEP_CFG command */
|
|
#define EHS_WAKE_ON_BROADCAST_DATA 0x0001
|
|
#define EHS_WAKE_ON_UNICAST_DATA 0x0002
|
|
#define EHS_WAKE_ON_MAC_EVENT 0x0004
|
|
#define EHS_WAKE_ON_MULTICAST_DATA 0x0008
|
|
#define EHS_REMOVE_WAKEUP 0xFFFFFFFF
|
|
/* Wake rules for Host_Sleep_CFG command */
|
|
#define WOL_RULE_NET_TYPE_INFRA_OR_IBSS 0x00
|
|
#define WOL_RULE_NET_TYPE_MESH 0x10
|
|
#define WOL_RULE_ADDR_TYPE_BCAST 0x01
|
|
#define WOL_RULE_ADDR_TYPE_MCAST 0x08
|
|
#define WOL_RULE_ADDR_TYPE_UCAST 0x02
|
|
#define WOL_RULE_OP_AND 0x01
|
|
#define WOL_RULE_OP_OR 0x02
|
|
#define WOL_RULE_OP_INVALID 0xFF
|
|
#define WOL_RESULT_VALID_CMD 0
|
|
#define WOL_RESULT_NOSPC_ERR 1
|
|
#define WOL_RESULT_EEXIST_ERR 2
|
|
|
|
/** Misc constants */
|
|
/* This section defines 802.11 specific contants */
|
|
|
|
#define MRVDRV_MAX_BSS_DESCRIPTS 16
|
|
#define MRVDRV_MAX_REGION_CODE 6
|
|
|
|
#define MRVDRV_IGNORE_MULTIPLE_DTIM 0xfffe
|
|
#define MRVDRV_MIN_MULTIPLE_DTIM 1
|
|
#define MRVDRV_MAX_MULTIPLE_DTIM 5
|
|
#define MRVDRV_DEFAULT_MULTIPLE_DTIM 1
|
|
|
|
#define MRVDRV_DEFAULT_LISTEN_INTERVAL 10
|
|
|
|
#define MRVDRV_CHANNELS_PER_SCAN 4
|
|
#define MRVDRV_MAX_CHANNELS_PER_SCAN 14
|
|
|
|
#define MRVDRV_MIN_BEACON_INTERVAL 20
|
|
#define MRVDRV_MAX_BEACON_INTERVAL 1000
|
|
#define MRVDRV_BEACON_INTERVAL 100
|
|
|
|
#define MARVELL_MESH_IE_LENGTH 9
|
|
|
|
/* Values used to populate the struct mrvl_mesh_ie. The only time you need this
|
|
* is when enabling the mesh using CMD_MESH_CONFIG.
|
|
*/
|
|
#define MARVELL_MESH_IE_TYPE 4
|
|
#define MARVELL_MESH_IE_SUBTYPE 0
|
|
#define MARVELL_MESH_IE_VERSION 0
|
|
#define MARVELL_MESH_PROTO_ID_HWMP 0
|
|
#define MARVELL_MESH_METRIC_ID 0
|
|
#define MARVELL_MESH_CAPABILITY 0
|
|
|
|
/** INT status Bit Definition*/
|
|
#define MRVDRV_TX_DNLD_RDY 0x0001
|
|
#define MRVDRV_RX_UPLD_RDY 0x0002
|
|
#define MRVDRV_CMD_DNLD_RDY 0x0004
|
|
#define MRVDRV_CMD_UPLD_RDY 0x0008
|
|
#define MRVDRV_CARDEVENT 0x0010
|
|
|
|
/* Automatic TX control default levels */
|
|
#define POW_ADAPT_DEFAULT_P0 13
|
|
#define POW_ADAPT_DEFAULT_P1 15
|
|
#define POW_ADAPT_DEFAULT_P2 18
|
|
#define TPC_DEFAULT_P0 5
|
|
#define TPC_DEFAULT_P1 10
|
|
#define TPC_DEFAULT_P2 13
|
|
|
|
/** TxPD status */
|
|
|
|
/* Station firmware use TxPD status field to report final Tx transmit
|
|
* result, Bit masks are used to present combined situations.
|
|
*/
|
|
|
|
#define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
|
|
#define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
|
|
|
|
/** Tx mesh flag */
|
|
/* Currently we are using normal WDS flag as mesh flag.
|
|
* TODO: change to proper mesh flag when MAC understands it.
|
|
*/
|
|
#define TxPD_CONTROL_WDS_FRAME (1<<17)
|
|
#define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
|
|
|
|
/** RxPD status */
|
|
|
|
#define MRVDRV_RXPD_STATUS_OK 0x0001
|
|
|
|
/** RxPD status - Received packet types */
|
|
/** Rx mesh flag */
|
|
/* Currently we are using normal WDS flag as mesh flag.
|
|
* TODO: change to proper mesh flag when MAC understands it.
|
|
*/
|
|
#define RxPD_CONTROL_WDS_FRAME (0x40)
|
|
#define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
|
|
|
|
/** RSSI-related defines */
|
|
/* RSSI constants are used to implement 802.11 RSSI threshold
|
|
* indication. if the Rx packet signal got too weak for 5 consecutive
|
|
* times, miniport driver (driver) will report this event to wrapper
|
|
*/
|
|
|
|
#define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
|
|
|
|
/** RTS/FRAG related defines */
|
|
#define MRVDRV_RTS_MIN_VALUE 0
|
|
#define MRVDRV_RTS_MAX_VALUE 2347
|
|
#define MRVDRV_FRAG_MIN_VALUE 256
|
|
#define MRVDRV_FRAG_MAX_VALUE 2346
|
|
|
|
/* This is for firmware specific length */
|
|
#define EXTRA_LEN 36
|
|
|
|
#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
|
|
(ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
|
|
|
|
#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
|
|
(ETH_FRAME_LEN + sizeof(struct rxpd) \
|
|
+ MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
|
|
|
|
#define CMD_F_HOSTCMD (1 << 0)
|
|
#define FW_CAPINFO_WPA (1 << 0)
|
|
#define FW_CAPINFO_PS (1 << 1)
|
|
#define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13)
|
|
#define FW_CAPINFO_BOOT2_UPGRADE (1<<14)
|
|
#define FW_CAPINFO_PERSISTENT_CONFIG (1<<15)
|
|
|
|
#define KEY_LEN_WPA_AES 16
|
|
#define KEY_LEN_WPA_TKIP 32
|
|
#define KEY_LEN_WEP_104 13
|
|
#define KEY_LEN_WEP_40 5
|
|
|
|
#define RF_ANTENNA_1 0x1
|
|
#define RF_ANTENNA_2 0x2
|
|
#define RF_ANTENNA_AUTO 0xFFFF
|
|
|
|
#define BAND_B (0x01)
|
|
#define BAND_G (0x02)
|
|
#define ALL_802_11_BANDS (BAND_B | BAND_G)
|
|
|
|
/** MACRO DEFINITIONS */
|
|
#define CAL_NF(NF) ((s32)(-(s32)(NF)))
|
|
#define CAL_RSSI(SNR, NF) ((s32)((s32)(SNR) + CAL_NF(NF)))
|
|
#define SCAN_RSSI(RSSI) (0x100 - ((u8)(RSSI)))
|
|
|
|
#define DEFAULT_BCN_AVG_FACTOR 8
|
|
#define DEFAULT_DATA_AVG_FACTOR 8
|
|
#define AVG_SCALE 100
|
|
#define CAL_AVG_SNR_NF(AVG, SNRNF, N) \
|
|
(((AVG) == 0) ? ((u16)(SNRNF) * AVG_SCALE) : \
|
|
((((int)(AVG) * (N -1)) + ((u16)(SNRNF) * \
|
|
AVG_SCALE)) / N))
|
|
|
|
#define MAX_RATES 14
|
|
|
|
#define MAX_LEDS 8
|
|
|
|
/** Global Variable Declaration */
|
|
extern const char lbs_driver_version[];
|
|
extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
|
|
|
|
extern u8 lbs_bg_rates[MAX_RATES];
|
|
|
|
/** ENUM definition*/
|
|
/** SNRNF_TYPE */
|
|
enum SNRNF_TYPE {
|
|
TYPE_BEACON = 0,
|
|
TYPE_RXPD,
|
|
MAX_TYPE_B
|
|
};
|
|
|
|
/** SNRNF_DATA*/
|
|
enum SNRNF_DATA {
|
|
TYPE_NOAVG = 0,
|
|
TYPE_AVG,
|
|
MAX_TYPE_AVG
|
|
};
|
|
|
|
/** LBS_802_11_POWER_MODE */
|
|
enum LBS_802_11_POWER_MODE {
|
|
LBS802_11POWERMODECAM,
|
|
LBS802_11POWERMODEMAX_PSP,
|
|
LBS802_11POWERMODEFAST_PSP,
|
|
/*not a real mode, defined as an upper bound */
|
|
LBS802_11POWEMODEMAX
|
|
};
|
|
|
|
/** PS_STATE */
|
|
enum PS_STATE {
|
|
PS_STATE_FULL_POWER,
|
|
PS_STATE_AWAKE,
|
|
PS_STATE_PRE_SLEEP,
|
|
PS_STATE_SLEEP
|
|
};
|
|
|
|
/** DNLD_STATE */
|
|
enum DNLD_STATE {
|
|
DNLD_RES_RECEIVED,
|
|
DNLD_DATA_SENT,
|
|
DNLD_CMD_SENT,
|
|
DNLD_BOOTCMD_SENT,
|
|
};
|
|
|
|
/** LBS_MEDIA_STATE */
|
|
enum LBS_MEDIA_STATE {
|
|
LBS_CONNECTED,
|
|
LBS_DISCONNECTED
|
|
};
|
|
|
|
/** LBS_802_11_PRIVACY_FILTER */
|
|
enum LBS_802_11_PRIVACY_FILTER {
|
|
LBS802_11PRIVFILTERACCEPTALL,
|
|
LBS802_11PRIVFILTER8021XWEP
|
|
};
|
|
|
|
/** mv_ms_type */
|
|
enum mv_ms_type {
|
|
MVMS_DAT = 0,
|
|
MVMS_CMD = 1,
|
|
MVMS_TXDONE = 2,
|
|
MVMS_EVENT
|
|
};
|
|
|
|
/** KEY_TYPE_ID */
|
|
enum KEY_TYPE_ID {
|
|
KEY_TYPE_ID_WEP = 0,
|
|
KEY_TYPE_ID_TKIP,
|
|
KEY_TYPE_ID_AES
|
|
};
|
|
|
|
/** KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
|
|
enum KEY_INFO_WPA {
|
|
KEY_INFO_WPA_MCAST = 0x01,
|
|
KEY_INFO_WPA_UNICAST = 0x02,
|
|
KEY_INFO_WPA_ENABLED = 0x04
|
|
};
|
|
|
|
/* Default values for fwt commands. */
|
|
#define FWT_DEFAULT_METRIC 0
|
|
#define FWT_DEFAULT_DIR 1
|
|
/* Default Rate, 11Mbps */
|
|
#define FWT_DEFAULT_RATE 3
|
|
#define FWT_DEFAULT_SSN 0xffffffff
|
|
#define FWT_DEFAULT_DSN 0
|
|
#define FWT_DEFAULT_HOPCOUNT 0
|
|
#define FWT_DEFAULT_TTL 0
|
|
#define FWT_DEFAULT_EXPIRATION 0
|
|
#define FWT_DEFAULT_SLEEPMODE 0
|
|
#define FWT_DEFAULT_SNR 0
|
|
|
|
#endif
|