Olliver Schinagl fdb0436c35 dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209 ... The AXP209 supports ramping up voltages on several regulators such as DCDC2 and LDO3, therefore we can use the standard 'regulator-ramp-delay' property for those 2 regulators. Note that the voltage ramp only works when the regulator is already enabled. E.g. when going from say 0.7 V to 3.6 V. When turning on the regulator, no voltage ramp is performed in hardware. What this means, is that if the bootloader brings up the voltage at 0.7 V, the ramp delay property is properly applied. If however, the bootloader leaves the power off, no ramp delay is applied when the power is enabled by the regulator framework. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>		2018-12-13 16:39:54 +00:00
..
bindings	dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209	2018-12-13 16:39:54 +00:00
booting-without-of.txt	dt: booting-without-of: DT fix s/#interrupt-cell/#interrupt-cells/	2018-01-22 05:48:34 +11:00
changesets.txt
dynamic-resolution-notes.txt	Documentation: remove dynamic-resolution-notes reference to non-existent file	2018-08-13 08:20:10 -06:00
of_unittest.txt
overlay-notes.txt	of: overlay: Stop leaking resources on overlay removal	2018-04-26 21:18:13 -05:00
todo.txt
usage-model.txt