mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 21:14:44 +08:00
e4e9bfb7c9
Calling ipa_cmd_pipeline_clear() after stopping the channel underlying the AP<-modem RX endpoint can lead to a deadlock. This occurs in the ->runtime_suspend device power operation for the IPA driver. While this callback is in progress, any other requests for power will block until the callback returns. Stopping the AP<-modem RX channel does not prevent the modem from sending another packet to this endpoint. If a packet arrives for an RX channel when the channel is stopped, an SUSPEND IPA interrupt condition will be pending. Handling an IPA interrupt requires power, so ipa_isr_thread() calls pm_runtime_get_sync() first thing. The problem occurs because a "pipeline clear" command will not complete while such a SUSPEND interrupt condition exists. So the SUSPEND IPA interrupt handler won't proceed until it gets power; that won't happen until the ->runtime_suspend callback (and its "pipeline clear" command) completes; and that can't happen while the SUSPEND interrupt condition exists. It turns out that in this case there is no need to use the "pipeline clear" command. There are scenarios in which clearing the pipeline is required while suspending, but those are not (yet) supported upstream. So a simple fix, avoiding the potential deadlock, is to stop calling ipa_cmd_pipeline_clear() in ipa_endpoint_suspend(). This removes the only user of ipa_cmd_pipeline_clear(), so get rid of that function. It can be restored again whenever it's needed. This is basically a manual revert along with an explanation for commit6cb63ea6a3
("net: ipa: introduce ipa_cmd_tag_process()"). Fixes:6cb63ea6a3
("net: ipa: introduce ipa_cmd_tag_process()") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
689 lines
22 KiB
C
689 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
|
|
* Copyright (C) 2019-2021 Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/dma-direction.h>
|
|
|
|
#include "gsi.h"
|
|
#include "gsi_trans.h"
|
|
#include "ipa.h"
|
|
#include "ipa_endpoint.h"
|
|
#include "ipa_table.h"
|
|
#include "ipa_cmd.h"
|
|
#include "ipa_mem.h"
|
|
|
|
/**
|
|
* DOC: IPA Immediate Commands
|
|
*
|
|
* The AP command TX endpoint is used to issue immediate commands to the IPA.
|
|
* An immediate command is generally used to request the IPA do something
|
|
* other than data transfer to another endpoint.
|
|
*
|
|
* Immediate commands are represented by GSI transactions just like other
|
|
* transfer requests, represented by a single GSI TRE. Each immediate
|
|
* command has a well-defined format, having a payload of a known length.
|
|
* This allows the transfer element's length field to be used to hold an
|
|
* immediate command's opcode. The payload for a command resides in DRAM
|
|
* and is described by a single scatterlist entry in its transaction.
|
|
* Commands do not require a transaction completion callback. To commit
|
|
* an immediate command transaction, either gsi_trans_commit_wait() or
|
|
* gsi_trans_commit_wait_timeout() is used.
|
|
*/
|
|
|
|
/* Some commands can wait until indicated pipeline stages are clear */
|
|
enum pipeline_clear_options {
|
|
pipeline_clear_hps = 0x0,
|
|
pipeline_clear_src_grp = 0x1,
|
|
pipeline_clear_full = 0x2,
|
|
};
|
|
|
|
/* IPA_CMD_IP_V{4,6}_{FILTER,ROUTING}_INIT */
|
|
|
|
struct ipa_cmd_hw_ip_fltrt_init {
|
|
__le64 hash_rules_addr;
|
|
__le64 flags;
|
|
__le64 nhash_rules_addr;
|
|
};
|
|
|
|
/* Field masks for ipa_cmd_hw_ip_fltrt_init structure fields */
|
|
#define IP_FLTRT_FLAGS_HASH_SIZE_FMASK GENMASK_ULL(11, 0)
|
|
#define IP_FLTRT_FLAGS_HASH_ADDR_FMASK GENMASK_ULL(27, 12)
|
|
#define IP_FLTRT_FLAGS_NHASH_SIZE_FMASK GENMASK_ULL(39, 28)
|
|
#define IP_FLTRT_FLAGS_NHASH_ADDR_FMASK GENMASK_ULL(55, 40)
|
|
|
|
/* IPA_CMD_HDR_INIT_LOCAL */
|
|
|
|
struct ipa_cmd_hw_hdr_init_local {
|
|
__le64 hdr_table_addr;
|
|
__le32 flags;
|
|
__le32 reserved;
|
|
};
|
|
|
|
/* Field masks for ipa_cmd_hw_hdr_init_local structure fields */
|
|
#define HDR_INIT_LOCAL_FLAGS_TABLE_SIZE_FMASK GENMASK(11, 0)
|
|
#define HDR_INIT_LOCAL_FLAGS_HDR_ADDR_FMASK GENMASK(27, 12)
|
|
|
|
/* IPA_CMD_REGISTER_WRITE */
|
|
|
|
/* For IPA v4.0+, the pipeline clear options are encoded in the opcode */
|
|
#define REGISTER_WRITE_OPCODE_SKIP_CLEAR_FMASK GENMASK(8, 8)
|
|
#define REGISTER_WRITE_OPCODE_CLEAR_OPTION_FMASK GENMASK(10, 9)
|
|
|
|
struct ipa_cmd_register_write {
|
|
__le16 flags; /* Unused/reserved prior to IPA v4.0 */
|
|
__le16 offset;
|
|
__le32 value;
|
|
__le32 value_mask;
|
|
__le32 clear_options; /* Unused/reserved for IPA v4.0+ */
|
|
};
|
|
|
|
/* Field masks for ipa_cmd_register_write structure fields */
|
|
/* The next field is present for IPA v4.0+ */
|
|
#define REGISTER_WRITE_FLAGS_OFFSET_HIGH_FMASK GENMASK(14, 11)
|
|
/* The next field is not present for IPA v4.0+ */
|
|
#define REGISTER_WRITE_FLAGS_SKIP_CLEAR_FMASK GENMASK(15, 15)
|
|
|
|
/* The next field and its values are not present for IPA v4.0+ */
|
|
#define REGISTER_WRITE_CLEAR_OPTIONS_FMASK GENMASK(1, 0)
|
|
|
|
/* IPA_CMD_IP_PACKET_INIT */
|
|
|
|
struct ipa_cmd_ip_packet_init {
|
|
u8 dest_endpoint;
|
|
u8 reserved[7];
|
|
};
|
|
|
|
/* Field masks for ipa_cmd_ip_packet_init dest_endpoint field */
|
|
#define IPA_PACKET_INIT_DEST_ENDPOINT_FMASK GENMASK(4, 0)
|
|
|
|
/* IPA_CMD_DMA_SHARED_MEM */
|
|
|
|
/* For IPA v4.0+, this opcode gets modified with pipeline clear options */
|
|
|
|
#define DMA_SHARED_MEM_OPCODE_SKIP_CLEAR_FMASK GENMASK(8, 8)
|
|
#define DMA_SHARED_MEM_OPCODE_CLEAR_OPTION_FMASK GENMASK(10, 9)
|
|
|
|
struct ipa_cmd_hw_dma_mem_mem {
|
|
__le16 clear_after_read; /* 0 or DMA_SHARED_MEM_CLEAR_AFTER_READ */
|
|
__le16 size;
|
|
__le16 local_addr;
|
|
__le16 flags;
|
|
__le64 system_addr;
|
|
};
|
|
|
|
/* Flag allowing atomic clear of target region after reading data (v4.0+)*/
|
|
#define DMA_SHARED_MEM_CLEAR_AFTER_READ GENMASK(15, 15)
|
|
|
|
/* Field masks for ipa_cmd_hw_dma_mem_mem structure fields */
|
|
#define DMA_SHARED_MEM_FLAGS_DIRECTION_FMASK GENMASK(0, 0)
|
|
/* The next two fields are not present for IPA v4.0+ */
|
|
#define DMA_SHARED_MEM_FLAGS_SKIP_CLEAR_FMASK GENMASK(1, 1)
|
|
#define DMA_SHARED_MEM_FLAGS_CLEAR_OPTIONS_FMASK GENMASK(3, 2)
|
|
|
|
/* IPA_CMD_IP_PACKET_TAG_STATUS */
|
|
|
|
struct ipa_cmd_ip_packet_tag_status {
|
|
__le64 tag;
|
|
};
|
|
|
|
#define IP_PACKET_TAG_STATUS_TAG_FMASK GENMASK_ULL(63, 16)
|
|
|
|
/* Immediate command payload */
|
|
union ipa_cmd_payload {
|
|
struct ipa_cmd_hw_ip_fltrt_init table_init;
|
|
struct ipa_cmd_hw_hdr_init_local hdr_init_local;
|
|
struct ipa_cmd_register_write register_write;
|
|
struct ipa_cmd_ip_packet_init ip_packet_init;
|
|
struct ipa_cmd_hw_dma_mem_mem dma_shared_mem;
|
|
struct ipa_cmd_ip_packet_tag_status ip_packet_tag_status;
|
|
};
|
|
|
|
static void ipa_cmd_validate_build(void)
|
|
{
|
|
/* The sizes of a filter and route tables need to fit into fields
|
|
* in the ipa_cmd_hw_ip_fltrt_init structure. Although hashed tables
|
|
* might not be used, non-hashed and hashed tables have the same
|
|
* maximum size. IPv4 and IPv6 filter tables have the same number
|
|
* of entries, as and IPv4 and IPv6 route tables have the same number
|
|
* of entries.
|
|
*/
|
|
#define TABLE_SIZE (TABLE_COUNT_MAX * sizeof(__le64))
|
|
#define TABLE_COUNT_MAX max_t(u32, IPA_ROUTE_COUNT_MAX, IPA_FILTER_COUNT_MAX)
|
|
BUILD_BUG_ON(TABLE_SIZE > field_max(IP_FLTRT_FLAGS_HASH_SIZE_FMASK));
|
|
BUILD_BUG_ON(TABLE_SIZE > field_max(IP_FLTRT_FLAGS_NHASH_SIZE_FMASK));
|
|
#undef TABLE_COUNT_MAX
|
|
#undef TABLE_SIZE
|
|
|
|
/* Hashed and non-hashed fields are assumed to be the same size */
|
|
BUILD_BUG_ON(field_max(IP_FLTRT_FLAGS_HASH_SIZE_FMASK) !=
|
|
field_max(IP_FLTRT_FLAGS_NHASH_SIZE_FMASK));
|
|
BUILD_BUG_ON(field_max(IP_FLTRT_FLAGS_HASH_ADDR_FMASK) !=
|
|
field_max(IP_FLTRT_FLAGS_NHASH_ADDR_FMASK));
|
|
|
|
/* Valid endpoint numbers must fit in the IP packet init command */
|
|
BUILD_BUG_ON(field_max(IPA_PACKET_INIT_DEST_ENDPOINT_FMASK) <
|
|
IPA_ENDPOINT_MAX - 1);
|
|
}
|
|
|
|
/* Validate a memory region holding a table */
|
|
bool ipa_cmd_table_valid(struct ipa *ipa, const struct ipa_mem *mem, bool route)
|
|
{
|
|
u32 offset_max = field_max(IP_FLTRT_FLAGS_NHASH_ADDR_FMASK);
|
|
u32 size_max = field_max(IP_FLTRT_FLAGS_NHASH_SIZE_FMASK);
|
|
const char *table = route ? "route" : "filter";
|
|
struct device *dev = &ipa->pdev->dev;
|
|
|
|
/* Size must fit in the immediate command field that holds it */
|
|
if (mem->size > size_max) {
|
|
dev_err(dev, "%s table region size too large\n", table);
|
|
dev_err(dev, " (0x%04x > 0x%04x)\n",
|
|
mem->size, size_max);
|
|
|
|
return false;
|
|
}
|
|
|
|
/* Offset must fit in the immediate command field that holds it */
|
|
if (mem->offset > offset_max ||
|
|
ipa->mem_offset > offset_max - mem->offset) {
|
|
dev_err(dev, "%s table region offset too large\n", table);
|
|
dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n",
|
|
ipa->mem_offset, mem->offset, offset_max);
|
|
|
|
return false;
|
|
}
|
|
|
|
/* Entire memory range must fit within IPA-local memory */
|
|
if (mem->offset > ipa->mem_size ||
|
|
mem->size > ipa->mem_size - mem->offset) {
|
|
dev_err(dev, "%s table region out of range\n", table);
|
|
dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n",
|
|
mem->offset, mem->size, ipa->mem_size);
|
|
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Validate the memory region that holds headers */
|
|
static bool ipa_cmd_header_valid(struct ipa *ipa)
|
|
{
|
|
struct device *dev = &ipa->pdev->dev;
|
|
const struct ipa_mem *mem;
|
|
u32 offset_max;
|
|
u32 size_max;
|
|
u32 offset;
|
|
u32 size;
|
|
|
|
/* In ipa_cmd_hdr_init_local_add() we record the offset and size of
|
|
* the header table memory area in an immediate command. Make sure
|
|
* the offset and size fit in the fields that need to hold them, and
|
|
* that the entire range is within the overall IPA memory range.
|
|
*/
|
|
offset_max = field_max(HDR_INIT_LOCAL_FLAGS_HDR_ADDR_FMASK);
|
|
size_max = field_max(HDR_INIT_LOCAL_FLAGS_TABLE_SIZE_FMASK);
|
|
|
|
/* The header memory area contains both the modem and AP header
|
|
* regions. The modem portion defines the address of the region.
|
|
*/
|
|
mem = ipa_mem_find(ipa, IPA_MEM_MODEM_HEADER);
|
|
offset = mem->offset;
|
|
size = mem->size;
|
|
|
|
/* Make sure the offset fits in the IPA command */
|
|
if (offset > offset_max || ipa->mem_offset > offset_max - offset) {
|
|
dev_err(dev, "header table region offset too large\n");
|
|
dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n",
|
|
ipa->mem_offset, offset, offset_max);
|
|
|
|
return false;
|
|
}
|
|
|
|
/* Add the size of the AP portion (if defined) to the combined size */
|
|
mem = ipa_mem_find(ipa, IPA_MEM_AP_HEADER);
|
|
if (mem)
|
|
size += mem->size;
|
|
|
|
/* Make sure the combined size fits in the IPA command */
|
|
if (size > size_max) {
|
|
dev_err(dev, "header table region size too large\n");
|
|
dev_err(dev, " (0x%04x > 0x%08x)\n", size, size_max);
|
|
|
|
return false;
|
|
}
|
|
|
|
/* Make sure the entire combined area fits in IPA memory */
|
|
if (size > ipa->mem_size || offset > ipa->mem_size - size) {
|
|
dev_err(dev, "header table region out of range\n");
|
|
dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n",
|
|
offset, size, ipa->mem_size);
|
|
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Indicate whether an offset can be used with a register_write command */
|
|
static bool ipa_cmd_register_write_offset_valid(struct ipa *ipa,
|
|
const char *name, u32 offset)
|
|
{
|
|
struct ipa_cmd_register_write *payload;
|
|
struct device *dev = &ipa->pdev->dev;
|
|
u32 offset_max;
|
|
u32 bit_count;
|
|
|
|
/* The maximum offset in a register_write immediate command depends
|
|
* on the version of IPA. A 16 bit offset is always supported,
|
|
* but starting with IPA v4.0 some additional high-order bits are
|
|
* allowed.
|
|
*/
|
|
bit_count = BITS_PER_BYTE * sizeof(payload->offset);
|
|
if (ipa->version >= IPA_VERSION_4_0)
|
|
bit_count += hweight32(REGISTER_WRITE_FLAGS_OFFSET_HIGH_FMASK);
|
|
BUILD_BUG_ON(bit_count > 32);
|
|
offset_max = ~0U >> (32 - bit_count);
|
|
|
|
/* Make sure the offset can be represented by the field(s)
|
|
* that holds it. Also make sure the offset is not outside
|
|
* the overall IPA memory range.
|
|
*/
|
|
if (offset > offset_max || ipa->mem_offset > offset_max - offset) {
|
|
dev_err(dev, "%s offset too large 0x%04x + 0x%04x > 0x%04x)\n",
|
|
name, ipa->mem_offset, offset, offset_max);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Check whether offsets passed to register_write are valid */
|
|
static bool ipa_cmd_register_write_valid(struct ipa *ipa)
|
|
{
|
|
const char *name;
|
|
u32 offset;
|
|
|
|
/* If hashed tables are supported, ensure the hash flush register
|
|
* offset will fit in a register write IPA immediate command.
|
|
*/
|
|
if (ipa_table_hash_support(ipa)) {
|
|
offset = ipa_reg_filt_rout_hash_flush_offset(ipa->version);
|
|
name = "filter/route hash flush";
|
|
if (!ipa_cmd_register_write_offset_valid(ipa, name, offset))
|
|
return false;
|
|
}
|
|
|
|
/* Each endpoint can have a status endpoint associated with it,
|
|
* and this is recorded in an endpoint register. If the modem
|
|
* crashes, we reset the status endpoint for all modem endpoints
|
|
* using a register write IPA immediate command. Make sure the
|
|
* worst case (highest endpoint number) offset of that endpoint
|
|
* fits in the register write command field(s) that must hold it.
|
|
*/
|
|
offset = IPA_REG_ENDP_STATUS_N_OFFSET(IPA_ENDPOINT_COUNT - 1);
|
|
name = "maximal endpoint status";
|
|
if (!ipa_cmd_register_write_offset_valid(ipa, name, offset))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
bool ipa_cmd_data_valid(struct ipa *ipa)
|
|
{
|
|
if (!ipa_cmd_header_valid(ipa))
|
|
return false;
|
|
|
|
if (!ipa_cmd_register_write_valid(ipa))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
|
|
int ipa_cmd_pool_init(struct gsi_channel *channel, u32 tre_max)
|
|
{
|
|
struct gsi_trans_info *trans_info = &channel->trans_info;
|
|
struct device *dev = channel->gsi->dev;
|
|
int ret;
|
|
|
|
/* This is as good a place as any to validate build constants */
|
|
ipa_cmd_validate_build();
|
|
|
|
/* Even though command payloads are allocated one at a time,
|
|
* a single transaction can require up to tlv_count of them,
|
|
* so we treat them as if that many can be allocated at once.
|
|
*/
|
|
ret = gsi_trans_pool_init_dma(dev, &trans_info->cmd_pool,
|
|
sizeof(union ipa_cmd_payload),
|
|
tre_max, channel->tlv_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Each TRE needs a command info structure */
|
|
ret = gsi_trans_pool_init(&trans_info->info_pool,
|
|
sizeof(struct ipa_cmd_info),
|
|
tre_max, channel->tlv_count);
|
|
if (ret)
|
|
gsi_trans_pool_exit_dma(dev, &trans_info->cmd_pool);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void ipa_cmd_pool_exit(struct gsi_channel *channel)
|
|
{
|
|
struct gsi_trans_info *trans_info = &channel->trans_info;
|
|
struct device *dev = channel->gsi->dev;
|
|
|
|
gsi_trans_pool_exit(&trans_info->info_pool);
|
|
gsi_trans_pool_exit_dma(dev, &trans_info->cmd_pool);
|
|
}
|
|
|
|
static union ipa_cmd_payload *
|
|
ipa_cmd_payload_alloc(struct ipa *ipa, dma_addr_t *addr)
|
|
{
|
|
struct gsi_trans_info *trans_info;
|
|
struct ipa_endpoint *endpoint;
|
|
|
|
endpoint = ipa->name_map[IPA_ENDPOINT_AP_COMMAND_TX];
|
|
trans_info = &ipa->gsi.channel[endpoint->channel_id].trans_info;
|
|
|
|
return gsi_trans_pool_alloc_dma(&trans_info->cmd_pool, addr);
|
|
}
|
|
|
|
/* If hash_size is 0, hash_offset and hash_addr ignored. */
|
|
void ipa_cmd_table_init_add(struct gsi_trans *trans,
|
|
enum ipa_cmd_opcode opcode, u16 size, u32 offset,
|
|
dma_addr_t addr, u16 hash_size, u32 hash_offset,
|
|
dma_addr_t hash_addr)
|
|
{
|
|
struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
|
|
enum dma_data_direction direction = DMA_TO_DEVICE;
|
|
struct ipa_cmd_hw_ip_fltrt_init *payload;
|
|
union ipa_cmd_payload *cmd_payload;
|
|
dma_addr_t payload_addr;
|
|
u64 val;
|
|
|
|
/* Record the non-hash table offset and size */
|
|
offset += ipa->mem_offset;
|
|
val = u64_encode_bits(offset, IP_FLTRT_FLAGS_NHASH_ADDR_FMASK);
|
|
val |= u64_encode_bits(size, IP_FLTRT_FLAGS_NHASH_SIZE_FMASK);
|
|
|
|
/* The hash table offset and address are zero if its size is 0 */
|
|
if (hash_size) {
|
|
/* Record the hash table offset and size */
|
|
hash_offset += ipa->mem_offset;
|
|
val |= u64_encode_bits(hash_offset,
|
|
IP_FLTRT_FLAGS_HASH_ADDR_FMASK);
|
|
val |= u64_encode_bits(hash_size,
|
|
IP_FLTRT_FLAGS_HASH_SIZE_FMASK);
|
|
}
|
|
|
|
cmd_payload = ipa_cmd_payload_alloc(ipa, &payload_addr);
|
|
payload = &cmd_payload->table_init;
|
|
|
|
/* Fill in all offsets and sizes and the non-hash table address */
|
|
if (hash_size)
|
|
payload->hash_rules_addr = cpu_to_le64(hash_addr);
|
|
payload->flags = cpu_to_le64(val);
|
|
payload->nhash_rules_addr = cpu_to_le64(addr);
|
|
|
|
gsi_trans_cmd_add(trans, payload, sizeof(*payload), payload_addr,
|
|
direction, opcode);
|
|
}
|
|
|
|
/* Initialize header space in IPA-local memory */
|
|
void ipa_cmd_hdr_init_local_add(struct gsi_trans *trans, u32 offset, u16 size,
|
|
dma_addr_t addr)
|
|
{
|
|
struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
|
|
enum ipa_cmd_opcode opcode = IPA_CMD_HDR_INIT_LOCAL;
|
|
enum dma_data_direction direction = DMA_TO_DEVICE;
|
|
struct ipa_cmd_hw_hdr_init_local *payload;
|
|
union ipa_cmd_payload *cmd_payload;
|
|
dma_addr_t payload_addr;
|
|
u32 flags;
|
|
|
|
offset += ipa->mem_offset;
|
|
|
|
/* With this command we tell the IPA where in its local memory the
|
|
* header tables reside. The content of the buffer provided is
|
|
* also written via DMA into that space. The IPA hardware owns
|
|
* the table, but the AP must initialize it.
|
|
*/
|
|
cmd_payload = ipa_cmd_payload_alloc(ipa, &payload_addr);
|
|
payload = &cmd_payload->hdr_init_local;
|
|
|
|
payload->hdr_table_addr = cpu_to_le64(addr);
|
|
flags = u32_encode_bits(size, HDR_INIT_LOCAL_FLAGS_TABLE_SIZE_FMASK);
|
|
flags |= u32_encode_bits(offset, HDR_INIT_LOCAL_FLAGS_HDR_ADDR_FMASK);
|
|
payload->flags = cpu_to_le32(flags);
|
|
|
|
gsi_trans_cmd_add(trans, payload, sizeof(*payload), payload_addr,
|
|
direction, opcode);
|
|
}
|
|
|
|
void ipa_cmd_register_write_add(struct gsi_trans *trans, u32 offset, u32 value,
|
|
u32 mask, bool clear_full)
|
|
{
|
|
struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
|
|
struct ipa_cmd_register_write *payload;
|
|
union ipa_cmd_payload *cmd_payload;
|
|
u32 opcode = IPA_CMD_REGISTER_WRITE;
|
|
dma_addr_t payload_addr;
|
|
u32 clear_option;
|
|
u32 options;
|
|
u16 flags;
|
|
|
|
/* pipeline_clear_src_grp is not used */
|
|
clear_option = clear_full ? pipeline_clear_full : pipeline_clear_hps;
|
|
|
|
/* IPA v4.0+ represents the pipeline clear options in the opcode. It
|
|
* also supports a larger offset by encoding additional high-order
|
|
* bits in the payload flags field.
|
|
*/
|
|
if (ipa->version >= IPA_VERSION_4_0) {
|
|
u16 offset_high;
|
|
u32 val;
|
|
|
|
/* Opcode encodes pipeline clear options */
|
|
/* SKIP_CLEAR is always 0 (don't skip pipeline clear) */
|
|
val = u16_encode_bits(clear_option,
|
|
REGISTER_WRITE_OPCODE_CLEAR_OPTION_FMASK);
|
|
opcode |= val;
|
|
|
|
/* Extract the high 4 bits from the offset */
|
|
offset_high = (u16)u32_get_bits(offset, GENMASK(19, 16));
|
|
offset &= (1 << 16) - 1;
|
|
|
|
/* Extract the top 4 bits and encode it into the flags field */
|
|
flags = u16_encode_bits(offset_high,
|
|
REGISTER_WRITE_FLAGS_OFFSET_HIGH_FMASK);
|
|
options = 0; /* reserved */
|
|
|
|
} else {
|
|
flags = 0; /* SKIP_CLEAR flag is always 0 */
|
|
options = u16_encode_bits(clear_option,
|
|
REGISTER_WRITE_CLEAR_OPTIONS_FMASK);
|
|
}
|
|
|
|
cmd_payload = ipa_cmd_payload_alloc(ipa, &payload_addr);
|
|
payload = &cmd_payload->register_write;
|
|
|
|
payload->flags = cpu_to_le16(flags);
|
|
payload->offset = cpu_to_le16((u16)offset);
|
|
payload->value = cpu_to_le32(value);
|
|
payload->value_mask = cpu_to_le32(mask);
|
|
payload->clear_options = cpu_to_le32(options);
|
|
|
|
gsi_trans_cmd_add(trans, payload, sizeof(*payload), payload_addr,
|
|
DMA_NONE, opcode);
|
|
}
|
|
|
|
/* Skip IP packet processing on the next data transfer on a TX channel */
|
|
static void ipa_cmd_ip_packet_init_add(struct gsi_trans *trans, u8 endpoint_id)
|
|
{
|
|
struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
|
|
enum ipa_cmd_opcode opcode = IPA_CMD_IP_PACKET_INIT;
|
|
enum dma_data_direction direction = DMA_TO_DEVICE;
|
|
struct ipa_cmd_ip_packet_init *payload;
|
|
union ipa_cmd_payload *cmd_payload;
|
|
dma_addr_t payload_addr;
|
|
|
|
cmd_payload = ipa_cmd_payload_alloc(ipa, &payload_addr);
|
|
payload = &cmd_payload->ip_packet_init;
|
|
|
|
payload->dest_endpoint = u8_encode_bits(endpoint_id,
|
|
IPA_PACKET_INIT_DEST_ENDPOINT_FMASK);
|
|
|
|
gsi_trans_cmd_add(trans, payload, sizeof(*payload), payload_addr,
|
|
direction, opcode);
|
|
}
|
|
|
|
/* Use a DMA command to read or write a block of IPA-resident memory */
|
|
void ipa_cmd_dma_shared_mem_add(struct gsi_trans *trans, u32 offset, u16 size,
|
|
dma_addr_t addr, bool toward_ipa)
|
|
{
|
|
struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
|
|
enum ipa_cmd_opcode opcode = IPA_CMD_DMA_SHARED_MEM;
|
|
struct ipa_cmd_hw_dma_mem_mem *payload;
|
|
union ipa_cmd_payload *cmd_payload;
|
|
enum dma_data_direction direction;
|
|
dma_addr_t payload_addr;
|
|
u16 flags;
|
|
|
|
/* size and offset must fit in 16 bit fields */
|
|
WARN_ON(!size);
|
|
WARN_ON(size > U16_MAX);
|
|
WARN_ON(offset > U16_MAX || ipa->mem_offset > U16_MAX - offset);
|
|
|
|
offset += ipa->mem_offset;
|
|
|
|
cmd_payload = ipa_cmd_payload_alloc(ipa, &payload_addr);
|
|
payload = &cmd_payload->dma_shared_mem;
|
|
|
|
/* payload->clear_after_read was reserved prior to IPA v4.0. It's
|
|
* never needed for current code, so it's 0 regardless of version.
|
|
*/
|
|
payload->size = cpu_to_le16(size);
|
|
payload->local_addr = cpu_to_le16(offset);
|
|
/* payload->flags:
|
|
* direction: 0 = write to IPA, 1 read from IPA
|
|
* Starting at v4.0 these are reserved; either way, all zero:
|
|
* pipeline clear: 0 = wait for pipeline clear (don't skip)
|
|
* clear_options: 0 = pipeline_clear_hps
|
|
* Instead, for v4.0+ these are encoded in the opcode. But again
|
|
* since both values are 0 we won't bother OR'ing them in.
|
|
*/
|
|
flags = toward_ipa ? 0 : DMA_SHARED_MEM_FLAGS_DIRECTION_FMASK;
|
|
payload->flags = cpu_to_le16(flags);
|
|
payload->system_addr = cpu_to_le64(addr);
|
|
|
|
direction = toward_ipa ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
|
|
|
|
gsi_trans_cmd_add(trans, payload, sizeof(*payload), payload_addr,
|
|
direction, opcode);
|
|
}
|
|
|
|
static void ipa_cmd_ip_tag_status_add(struct gsi_trans *trans)
|
|
{
|
|
struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
|
|
enum ipa_cmd_opcode opcode = IPA_CMD_IP_PACKET_TAG_STATUS;
|
|
enum dma_data_direction direction = DMA_TO_DEVICE;
|
|
struct ipa_cmd_ip_packet_tag_status *payload;
|
|
union ipa_cmd_payload *cmd_payload;
|
|
dma_addr_t payload_addr;
|
|
|
|
cmd_payload = ipa_cmd_payload_alloc(ipa, &payload_addr);
|
|
payload = &cmd_payload->ip_packet_tag_status;
|
|
|
|
payload->tag = le64_encode_bits(0, IP_PACKET_TAG_STATUS_TAG_FMASK);
|
|
|
|
gsi_trans_cmd_add(trans, payload, sizeof(*payload), payload_addr,
|
|
direction, opcode);
|
|
}
|
|
|
|
/* Issue a small command TX data transfer */
|
|
static void ipa_cmd_transfer_add(struct gsi_trans *trans)
|
|
{
|
|
struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
|
|
enum dma_data_direction direction = DMA_TO_DEVICE;
|
|
enum ipa_cmd_opcode opcode = IPA_CMD_NONE;
|
|
union ipa_cmd_payload *payload;
|
|
dma_addr_t payload_addr;
|
|
|
|
/* Just transfer a zero-filled payload structure */
|
|
payload = ipa_cmd_payload_alloc(ipa, &payload_addr);
|
|
|
|
gsi_trans_cmd_add(trans, payload, sizeof(*payload), payload_addr,
|
|
direction, opcode);
|
|
}
|
|
|
|
/* Add immediate commands to a transaction to clear the hardware pipeline */
|
|
void ipa_cmd_pipeline_clear_add(struct gsi_trans *trans)
|
|
{
|
|
struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
|
|
struct ipa_endpoint *endpoint;
|
|
|
|
/* This will complete when the transfer is received */
|
|
reinit_completion(&ipa->completion);
|
|
|
|
/* Issue a no-op register write command (mask 0 means no write) */
|
|
ipa_cmd_register_write_add(trans, 0, 0, 0, true);
|
|
|
|
/* Send a data packet through the IPA pipeline. The packet_init
|
|
* command says to send the next packet directly to the exception
|
|
* endpoint without any other IPA processing. The tag_status
|
|
* command requests that status be generated on completion of
|
|
* that transfer, and that it will be tagged with a value.
|
|
* Finally, the transfer command sends a small packet of data
|
|
* (instead of a command) using the command endpoint.
|
|
*/
|
|
endpoint = ipa->name_map[IPA_ENDPOINT_AP_LAN_RX];
|
|
ipa_cmd_ip_packet_init_add(trans, endpoint->endpoint_id);
|
|
ipa_cmd_ip_tag_status_add(trans);
|
|
ipa_cmd_transfer_add(trans);
|
|
}
|
|
|
|
/* Returns the number of commands required to clear the pipeline */
|
|
u32 ipa_cmd_pipeline_clear_count(void)
|
|
{
|
|
return 4;
|
|
}
|
|
|
|
void ipa_cmd_pipeline_clear_wait(struct ipa *ipa)
|
|
{
|
|
wait_for_completion(&ipa->completion);
|
|
}
|
|
|
|
static struct ipa_cmd_info *
|
|
ipa_cmd_info_alloc(struct ipa_endpoint *endpoint, u32 tre_count)
|
|
{
|
|
struct gsi_channel *channel;
|
|
|
|
channel = &endpoint->ipa->gsi.channel[endpoint->channel_id];
|
|
|
|
return gsi_trans_pool_alloc(&channel->trans_info.info_pool, tre_count);
|
|
}
|
|
|
|
/* Allocate a transaction for the command TX endpoint */
|
|
struct gsi_trans *ipa_cmd_trans_alloc(struct ipa *ipa, u32 tre_count)
|
|
{
|
|
struct ipa_endpoint *endpoint;
|
|
struct gsi_trans *trans;
|
|
|
|
endpoint = ipa->name_map[IPA_ENDPOINT_AP_COMMAND_TX];
|
|
|
|
trans = gsi_channel_trans_alloc(&ipa->gsi, endpoint->channel_id,
|
|
tre_count, DMA_NONE);
|
|
if (trans)
|
|
trans->info = ipa_cmd_info_alloc(endpoint, tre_count);
|
|
|
|
return trans;
|
|
}
|