linux/arch/openrisc/kernel/setup.c
Stafford Horne 94effcedaa openrisc: Fix compiler warnings in setup
This was pointed out with the recent name change of or32_early_setup to
or1k_early_setup.  Investigating the file I found a few other warnings
so cleaning them up here.

    arch/openrisc/kernel/setup.c:220:13: warning: no previous prototype for 'or1k_early_setup' [-Wmissing-prototypes]
      220 | void __init or1k_early_setup(void *fdt)
	  |             ^~~~~~~~~~~~~~~~

Fix this the missing or1k_early_setup prototype warning by adding an
asm/setup.h file to define the prototype.

    arch/openrisc/kernel/setup.c:246:13: warning: no previous prototype for 'detect_unit_config' [-Wmissing-prototypes]
      246 | void __init detect_unit_config(unsigned long upr, unsigned long mask,
	  |             ^~~~~~~~~~~~~~~~~~

The function detect_unit_config is not used, just remove it.

    arch/openrisc/kernel/setup.c:221: warning: Function parameter or member 'fdt' not described in 'or1k_early_setup'

Add @fdt docs to the function comment to suppress this warning.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2021-08-11 06:14:23 +09:00

393 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* OpenRISC setup.c
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* Modifications for the OpenRISC architecture:
* Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
*
* This file handles the architecture-dependent parts of initialization
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/init.h>
#include <linux/memblock.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/of.h>
#include <linux/device.h>
#include <asm/sections.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/cpuinfo.h>
#include <asm/delay.h>
#include "vmlinux.h"
static void __init setup_memory(void)
{
unsigned long ram_start_pfn;
unsigned long ram_end_pfn;
phys_addr_t memory_start, memory_end;
memory_end = memory_start = 0;
/* Find main memory where is the kernel, we assume its the only one */
memory_start = memblock_start_of_DRAM();
memory_end = memblock_end_of_DRAM();
if (!memory_end) {
panic("No memory!");
}
ram_start_pfn = PFN_UP(memory_start);
ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
/* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
min_low_pfn = ram_start_pfn;
max_low_pfn = ram_end_pfn;
max_pfn = ram_end_pfn;
/*
* initialize the boot-time allocator (with low memory only).
*
* This makes the memory from the end of the kernel to the end of
* RAM usable.
*/
memblock_reserve(__pa(_stext), _end - _stext);
#ifdef CONFIG_BLK_DEV_INITRD
/* Then reserve the initrd, if any */
if (initrd_start && (initrd_end > initrd_start)) {
unsigned long aligned_start = ALIGN_DOWN(initrd_start, PAGE_SIZE);
unsigned long aligned_end = ALIGN(initrd_end, PAGE_SIZE);
memblock_reserve(__pa(aligned_start), aligned_end - aligned_start);
}
#endif /* CONFIG_BLK_DEV_INITRD */
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
memblock_dump_all();
}
struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
static void print_cpuinfo(void)
{
unsigned long upr = mfspr(SPR_UPR);
unsigned long vr = mfspr(SPR_VR);
unsigned int version;
unsigned int revision;
struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
version = (vr & SPR_VR_VER) >> 24;
revision = (vr & SPR_VR_REV);
printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
version, revision, cpuinfo->clock_frequency / 1000000);
if (!(upr & SPR_UPR_UP)) {
printk(KERN_INFO
"-- no UPR register... unable to detect configuration\n");
return;
}
if (upr & SPR_UPR_DCP)
printk(KERN_INFO
"-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
cpuinfo->dcache_size, cpuinfo->dcache_block_size,
cpuinfo->dcache_ways);
else
printk(KERN_INFO "-- dcache disabled\n");
if (upr & SPR_UPR_ICP)
printk(KERN_INFO
"-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
cpuinfo->icache_size, cpuinfo->icache_block_size,
cpuinfo->icache_ways);
else
printk(KERN_INFO "-- icache disabled\n");
if (upr & SPR_UPR_DMP)
printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
if (upr & SPR_UPR_IMP)
printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
printk(KERN_INFO "-- additional features:\n");
if (upr & SPR_UPR_DUP)
printk(KERN_INFO "-- debug unit\n");
if (upr & SPR_UPR_PCUP)
printk(KERN_INFO "-- performance counters\n");
if (upr & SPR_UPR_PMP)
printk(KERN_INFO "-- power management\n");
if (upr & SPR_UPR_PICP)
printk(KERN_INFO "-- PIC\n");
if (upr & SPR_UPR_TTP)
printk(KERN_INFO "-- timer\n");
if (upr & SPR_UPR_CUP)
printk(KERN_INFO "-- custom unit(s)\n");
}
static struct device_node *setup_find_cpu_node(int cpu)
{
u32 hwid;
struct device_node *cpun;
for_each_of_cpu_node(cpun) {
if (of_property_read_u32(cpun, "reg", &hwid))
continue;
if (hwid == cpu)
return cpun;
}
return NULL;
}
void __init setup_cpuinfo(void)
{
struct device_node *cpu;
unsigned long iccfgr, dccfgr;
unsigned long cache_set_size;
int cpu_id = smp_processor_id();
struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id];
cpu = setup_find_cpu_node(cpu_id);
if (!cpu)
panic("Couldn't find CPU%d in device tree...\n", cpu_id);
iccfgr = mfspr(SPR_ICCFGR);
cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
cpuinfo->icache_size =
cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size;
dccfgr = mfspr(SPR_DCCFGR);
cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
cpuinfo->dcache_size =
cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size;
if (of_property_read_u32(cpu, "clock-frequency",
&cpuinfo->clock_frequency)) {
printk(KERN_WARNING
"Device tree missing CPU 'clock-frequency' parameter."
"Assuming frequency 25MHZ"
"This is probably not what you want.");
}
cpuinfo->coreid = mfspr(SPR_COREID);
of_node_put(cpu);
print_cpuinfo();
}
/**
* or1k_early_setup
* @fdt: pointer to the start of the device tree in memory or NULL
*
* Handles the pointer to the device tree that this kernel is to use
* for establishing the available platform devices.
*
* Falls back on built-in device tree in case null pointer is passed.
*/
void __init or1k_early_setup(void *fdt)
{
if (fdt)
pr_info("FDT at %p\n", fdt);
else {
fdt = __dtb_start;
pr_info("Compiled-in FDT at %p\n", fdt);
}
early_init_devtree(fdt);
}
static inline unsigned long extract_value_bits(unsigned long reg,
short bit_nr, short width)
{
return (reg >> bit_nr) & (0 << width);
}
static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
{
while (!(mask & 0x1)) {
reg = reg >> 1;
mask = mask >> 1;
}
return mask & reg;
}
/*
* calibrate_delay
*
* Lightweight calibrate_delay implementation that calculates loops_per_jiffy
* from the clock frequency passed in via the device tree
*
*/
void calibrate_delay(void)
{
const int *val;
struct device_node *cpu = setup_find_cpu_node(smp_processor_id());
val = of_get_property(cpu, "clock-frequency", NULL);
if (!val)
panic("no cpu 'clock-frequency' parameter in device tree");
loops_per_jiffy = *val / HZ;
pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
loops_per_jiffy / (500000 / HZ),
(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
of_node_put(cpu);
}
void __init setup_arch(char **cmdline_p)
{
unflatten_and_copy_device_tree();
setup_cpuinfo();
#ifdef CONFIG_SMP
smp_init_cpus();
#endif
/* process 1's initial memory region is the kernel code/data */
setup_initial_init_mm(_stext, _etext, _edata, _end);
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start == initrd_end) {
printk(KERN_INFO "Initial ramdisk not found\n");
initrd_start = 0;
initrd_end = 0;
} else {
printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n",
(void *)(initrd_start), initrd_end - initrd_start);
initrd_below_start_ok = 1;
}
#endif
/* setup memblock allocator */
setup_memory();
/* paging_init() sets up the MMU and marks all pages as reserved */
paging_init();
*cmdline_p = boot_command_line;
printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
}
static int show_cpuinfo(struct seq_file *m, void *v)
{
unsigned int vr, cpucfgr;
unsigned int avr;
unsigned int version;
struct cpuinfo_or1k *cpuinfo = v;
vr = mfspr(SPR_VR);
cpucfgr = mfspr(SPR_CPUCFGR);
#ifdef CONFIG_SMP
seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
#endif
if (vr & SPR_VR_UVRP) {
vr = mfspr(SPR_VR2);
version = vr & SPR_VR2_VER;
avr = mfspr(SPR_AVR);
seq_printf(m, "cpu architecture\t: "
"OpenRISC 1000 (%d.%d-rev%d)\n",
(avr >> 24) & 0xff,
(avr >> 16) & 0xff,
(avr >> 8) & 0xff);
seq_printf(m, "cpu implementation id\t: 0x%x\n",
(vr & SPR_VR2_CPUID) >> 24);
seq_printf(m, "cpu version\t\t: 0x%x\n", version);
} else {
version = (vr & SPR_VR_VER) >> 24;
seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version);
seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV);
}
seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ);
seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size);
seq_printf(m, "dcache block size\t: %d bytes\n",
cpuinfo->dcache_block_size);
seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways);
seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size);
seq_printf(m, "icache block size\t: %d bytes\n",
cpuinfo->icache_block_size);
seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways);
seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n",
1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n",
1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
seq_printf(m, "bogomips\t\t: %lu.%02lu\n",
(loops_per_jiffy * HZ) / 500000,
((loops_per_jiffy * HZ) / 5000) % 100);
seq_puts(m, "features\t\t: ");
seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : "");
seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : "");
seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : "");
seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : "");
seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : "");
seq_puts(m, "\n");
seq_puts(m, "\n");
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
*pos = cpumask_next(*pos - 1, cpu_online_mask);
if ((*pos) < nr_cpu_ids)
return &cpuinfo_or1k[*pos];
return NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
(*pos)++;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};