mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-12 13:34:10 +08:00
accb9d05df
The pressure sensor BMP580 contains a non-volatile memory that stores trimming and configuration params. That memory provides an programmable user range of three 2-byte words. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/f3f453d9b2c0f7820ca9c56e24e2165b6c39bb67.1676823250.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
479 lines
13 KiB
C
479 lines
13 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
|
|
/* BMP580 specific registers */
|
|
#define BMP580_REG_CMD 0x7E
|
|
#define BMP580_REG_EFF_OSR 0x38
|
|
#define BMP580_REG_ODR_CONFIG 0x37
|
|
#define BMP580_REG_OSR_CONFIG 0x36
|
|
#define BMP580_REG_IF_CONFIG 0x13
|
|
#define BMP580_REG_REV_ID 0x02
|
|
#define BMP580_REG_CHIP_ID 0x01
|
|
/* OOR allows to configure a pressure alarm */
|
|
#define BMP580_REG_OOR_CONFIG 0x35
|
|
#define BMP580_REG_OOR_RANGE 0x34
|
|
#define BMP580_REG_OOR_THR_MSB 0x33
|
|
#define BMP580_REG_OOR_THR_LSB 0x32
|
|
/* DSP registers (IIR filters) */
|
|
#define BMP580_REG_DSP_IIR 0x31
|
|
#define BMP580_REG_DSP_CONFIG 0x30
|
|
/* NVM access registers */
|
|
#define BMP580_REG_NVM_DATA_MSB 0x2D
|
|
#define BMP580_REG_NVM_DATA_LSB 0x2C
|
|
#define BMP580_REG_NVM_ADDR 0x2B
|
|
/* Status registers */
|
|
#define BMP580_REG_STATUS 0x28
|
|
#define BMP580_REG_INT_STATUS 0x27
|
|
#define BMP580_REG_CHIP_STATUS 0x11
|
|
/* Data registers */
|
|
#define BMP580_REG_FIFO_DATA 0x29
|
|
#define BMP580_REG_PRESS_MSB 0x22
|
|
#define BMP580_REG_PRESS_LSB 0x21
|
|
#define BMP580_REG_PRESS_XLSB 0x20
|
|
#define BMP580_REG_TEMP_MSB 0x1F
|
|
#define BMP580_REG_TEMP_LSB 0x1E
|
|
#define BMP580_REG_TEMP_XLSB 0x1D
|
|
/* FIFO config registers */
|
|
#define BMP580_REG_FIFO_SEL 0x18
|
|
#define BMP580_REG_FIFO_COUNT 0x17
|
|
#define BMP580_REG_FIFO_CONFIG 0x16
|
|
/* Interruptions config registers */
|
|
#define BMP580_REG_INT_SOURCE 0x15
|
|
#define BMP580_REG_INT_CONFIG 0x14
|
|
|
|
#define BMP580_CMD_NOOP 0x00
|
|
#define BMP580_CMD_EXTMODE_SEQ_0 0x73
|
|
#define BMP580_CMD_EXTMODE_SEQ_1 0xB4
|
|
#define BMP580_CMD_EXTMODE_SEQ_2 0x69
|
|
#define BMP580_CMD_NVM_OP_SEQ_0 0x5D
|
|
#define BMP580_CMD_NVM_READ_SEQ_1 0xA5
|
|
#define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0
|
|
#define BMP580_CMD_SOFT_RESET 0xB6
|
|
|
|
#define BMP580_INT_STATUS_POR_MASK BIT(4)
|
|
|
|
#define BMP580_STATUS_CORE_RDY_MASK BIT(0)
|
|
#define BMP580_STATUS_NVM_RDY_MASK BIT(1)
|
|
#define BMP580_STATUS_NVM_ERR_MASK BIT(2)
|
|
#define BMP580_STATUS_NVM_CMD_ERR_MASK BIT(3)
|
|
|
|
#define BMP580_OSR_PRESS_MASK GENMASK(5, 3)
|
|
#define BMP580_OSR_TEMP_MASK GENMASK(2, 0)
|
|
#define BMP580_OSR_PRESS_EN BIT(6)
|
|
#define BMP580_EFF_OSR_PRESS_MASK GENMASK(5, 3)
|
|
#define BMP580_EFF_OSR_TEMP_MASK GENMASK(2, 0)
|
|
#define BMP580_EFF_OSR_VALID_ODR BIT(7)
|
|
|
|
#define BMP580_ODR_MASK GENMASK(6, 2)
|
|
#define BMP580_MODE_MASK GENMASK(1, 0)
|
|
#define BMP580_MODE_SLEEP 0
|
|
#define BMP580_MODE_NORMAL 1
|
|
#define BMP580_MODE_FORCED 2
|
|
#define BMP580_MODE_CONTINOUS 3
|
|
#define BMP580_ODR_DEEPSLEEP_DIS BIT(7)
|
|
|
|
#define BMP580_DSP_COMP_MASK GENMASK(1, 0)
|
|
#define BMP580_DSP_COMP_DIS 0
|
|
#define BMP580_DSP_TEMP_COMP_EN 1
|
|
/*
|
|
* In section 7.27 of datasheet, modes 2 and 3 are technically the same.
|
|
* Pressure compensation means also enabling temperature compensation
|
|
*/
|
|
#define BMP580_DSP_PRESS_COMP_EN 2
|
|
#define BMP580_DSP_PRESS_TEMP_COMP_EN 3
|
|
#define BMP580_DSP_IIR_FORCED_FLUSH BIT(2)
|
|
#define BMP580_DSP_SHDW_IIR_TEMP_EN BIT(3)
|
|
#define BMP580_DSP_FIFO_IIR_TEMP_EN BIT(4)
|
|
#define BMP580_DSP_SHDW_IIR_PRESS_EN BIT(5)
|
|
#define BMP580_DSP_FIFO_IIR_PRESS_EN BIT(6)
|
|
#define BMP580_DSP_OOR_IIR_PRESS_EN BIT(7)
|
|
|
|
#define BMP580_DSP_IIR_PRESS_MASK GENMASK(5, 3)
|
|
#define BMP580_DSP_IIR_TEMP_MASK GENMASK(2, 0)
|
|
#define BMP580_FILTER_OFF 0
|
|
#define BMP580_FILTER_1X 1
|
|
#define BMP580_FILTER_3X 2
|
|
#define BMP580_FILTER_7X 3
|
|
#define BMP580_FILTER_15X 4
|
|
#define BMP580_FILTER_31X 5
|
|
#define BMP580_FILTER_63X 6
|
|
#define BMP580_FILTER_127X 7
|
|
|
|
#define BMP580_NVM_ROW_ADDR_MASK GENMASK(5, 0)
|
|
#define BMP580_NVM_PROG_EN BIT(6)
|
|
|
|
#define BMP580_TEMP_SKIPPED 0x7f7f7f
|
|
#define BMP580_PRESS_SKIPPED 0x7f7f7f
|
|
|
|
/* BMP380 specific registers */
|
|
#define BMP380_REG_CMD 0x7E
|
|
#define BMP380_REG_CONFIG 0x1F
|
|
#define BMP380_REG_ODR 0x1D
|
|
#define BMP380_REG_OSR 0x1C
|
|
#define BMP380_REG_POWER_CONTROL 0x1B
|
|
#define BMP380_REG_IF_CONFIG 0x1A
|
|
#define BMP380_REG_INT_CONTROL 0x19
|
|
#define BMP380_REG_INT_STATUS 0x11
|
|
#define BMP380_REG_EVENT 0x10
|
|
#define BMP380_REG_STATUS 0x03
|
|
#define BMP380_REG_ERROR 0x02
|
|
#define BMP380_REG_ID 0x00
|
|
|
|
#define BMP380_REG_FIFO_CONFIG_1 0x18
|
|
#define BMP380_REG_FIFO_CONFIG_2 0x17
|
|
#define BMP380_REG_FIFO_WATERMARK_MSB 0x16
|
|
#define BMP380_REG_FIFO_WATERMARK_LSB 0x15
|
|
#define BMP380_REG_FIFO_DATA 0x14
|
|
#define BMP380_REG_FIFO_LENGTH_MSB 0x13
|
|
#define BMP380_REG_FIFO_LENGTH_LSB 0x12
|
|
|
|
#define BMP380_REG_SENSOR_TIME_MSB 0x0E
|
|
#define BMP380_REG_SENSOR_TIME_LSB 0x0D
|
|
#define BMP380_REG_SENSOR_TIME_XLSB 0x0C
|
|
|
|
#define BMP380_REG_TEMP_MSB 0x09
|
|
#define BMP380_REG_TEMP_LSB 0x08
|
|
#define BMP380_REG_TEMP_XLSB 0x07
|
|
|
|
#define BMP380_REG_PRESS_MSB 0x06
|
|
#define BMP380_REG_PRESS_LSB 0x05
|
|
#define BMP380_REG_PRESS_XLSB 0x04
|
|
|
|
#define BMP380_REG_CALIB_TEMP_START 0x31
|
|
#define BMP380_CALIB_REG_COUNT 21
|
|
|
|
#define BMP380_FILTER_MASK GENMASK(3, 1)
|
|
#define BMP380_FILTER_OFF 0
|
|
#define BMP380_FILTER_1X 1
|
|
#define BMP380_FILTER_3X 2
|
|
#define BMP380_FILTER_7X 3
|
|
#define BMP380_FILTER_15X 4
|
|
#define BMP380_FILTER_31X 5
|
|
#define BMP380_FILTER_63X 6
|
|
#define BMP380_FILTER_127X 7
|
|
|
|
#define BMP380_OSRS_TEMP_MASK GENMASK(5, 3)
|
|
#define BMP380_OSRS_PRESS_MASK GENMASK(2, 0)
|
|
|
|
#define BMP380_ODRS_MASK GENMASK(4, 0)
|
|
|
|
#define BMP380_CTRL_SENSORS_MASK GENMASK(1, 0)
|
|
#define BMP380_CTRL_SENSORS_PRESS_EN BIT(0)
|
|
#define BMP380_CTRL_SENSORS_TEMP_EN BIT(1)
|
|
#define BMP380_MODE_MASK GENMASK(5, 4)
|
|
#define BMP380_MODE_SLEEP 0
|
|
#define BMP380_MODE_FORCED 1
|
|
#define BMP380_MODE_NORMAL 3
|
|
|
|
#define BMP380_MIN_TEMP -4000
|
|
#define BMP380_MAX_TEMP 8500
|
|
#define BMP380_MIN_PRES 3000000
|
|
#define BMP380_MAX_PRES 12500000
|
|
|
|
#define BMP380_CMD_NOOP 0x00
|
|
#define BMP380_CMD_EXTMODE_EN_MID 0x34
|
|
#define BMP380_CMD_FIFO_FLUSH 0xB0
|
|
#define BMP380_CMD_SOFT_RESET 0xB6
|
|
|
|
#define BMP380_STATUS_CMD_RDY_MASK BIT(4)
|
|
#define BMP380_STATUS_DRDY_PRESS_MASK BIT(5)
|
|
#define BMP380_STATUS_DRDY_TEMP_MASK BIT(6)
|
|
|
|
#define BMP380_ERR_FATAL_MASK BIT(0)
|
|
#define BMP380_ERR_CMD_MASK BIT(1)
|
|
#define BMP380_ERR_CONF_MASK BIT(2)
|
|
|
|
#define BMP380_TEMP_SKIPPED 0x800000
|
|
#define BMP380_PRESS_SKIPPED 0x800000
|
|
|
|
/* BMP280 specific registers */
|
|
#define BMP280_REG_HUMIDITY_LSB 0xFE
|
|
#define BMP280_REG_HUMIDITY_MSB 0xFD
|
|
#define BMP280_REG_TEMP_XLSB 0xFC
|
|
#define BMP280_REG_TEMP_LSB 0xFB
|
|
#define BMP280_REG_TEMP_MSB 0xFA
|
|
#define BMP280_REG_PRESS_XLSB 0xF9
|
|
#define BMP280_REG_PRESS_LSB 0xF8
|
|
#define BMP280_REG_PRESS_MSB 0xF7
|
|
|
|
/* Helper mask to truncate excess 4 bits on pressure and temp readings */
|
|
#define BMP280_MEAS_TRIM_MASK GENMASK(24, 4)
|
|
|
|
#define BMP280_REG_CONFIG 0xF5
|
|
#define BMP280_REG_CTRL_MEAS 0xF4
|
|
#define BMP280_REG_STATUS 0xF3
|
|
#define BMP280_REG_CTRL_HUMIDITY 0xF2
|
|
|
|
/* Due to non linear mapping, and data sizes we can't do a bulk read */
|
|
#define BMP280_REG_COMP_H1 0xA1
|
|
#define BMP280_REG_COMP_H2 0xE1
|
|
#define BMP280_REG_COMP_H3 0xE3
|
|
#define BMP280_REG_COMP_H4 0xE4
|
|
#define BMP280_REG_COMP_H5 0xE5
|
|
#define BMP280_REG_COMP_H6 0xE7
|
|
|
|
#define BMP280_REG_COMP_TEMP_START 0x88
|
|
#define BMP280_COMP_TEMP_REG_COUNT 6
|
|
|
|
#define BMP280_REG_COMP_PRESS_START 0x8E
|
|
#define BMP280_COMP_PRESS_REG_COUNT 18
|
|
|
|
#define BMP280_COMP_H5_MASK GENMASK(15, 4)
|
|
|
|
#define BMP280_CONTIGUOUS_CALIB_REGS (BMP280_COMP_TEMP_REG_COUNT + \
|
|
BMP280_COMP_PRESS_REG_COUNT)
|
|
|
|
#define BMP280_FILTER_MASK GENMASK(4, 2)
|
|
#define BMP280_FILTER_OFF 0
|
|
#define BMP280_FILTER_2X 1
|
|
#define BMP280_FILTER_4X 2
|
|
#define BMP280_FILTER_8X 3
|
|
#define BMP280_FILTER_16X 4
|
|
|
|
#define BMP280_OSRS_HUMIDITY_MASK GENMASK(2, 0)
|
|
#define BMP280_OSRS_HUMIDITY_SKIP 0
|
|
#define BMP280_OSRS_HUMIDITY_1X 1
|
|
#define BMP280_OSRS_HUMIDITY_2X 2
|
|
#define BMP280_OSRS_HUMIDITY_4X 3
|
|
#define BMP280_OSRS_HUMIDITY_8X 4
|
|
#define BMP280_OSRS_HUMIDITY_16X 5
|
|
|
|
#define BMP280_OSRS_TEMP_MASK GENMASK(7, 5)
|
|
#define BMP280_OSRS_TEMP_SKIP 0
|
|
#define BMP280_OSRS_TEMP_1X 1
|
|
#define BMP280_OSRS_TEMP_2X 2
|
|
#define BMP280_OSRS_TEMP_4X 3
|
|
#define BMP280_OSRS_TEMP_8X 4
|
|
#define BMP280_OSRS_TEMP_16X 5
|
|
|
|
#define BMP280_OSRS_PRESS_MASK GENMASK(4, 2)
|
|
#define BMP280_OSRS_PRESS_SKIP 0
|
|
#define BMP280_OSRS_PRESS_1X 1
|
|
#define BMP280_OSRS_PRESS_2X 2
|
|
#define BMP280_OSRS_PRESS_4X 3
|
|
#define BMP280_OSRS_PRESS_8X 4
|
|
#define BMP280_OSRS_PRESS_16X 5
|
|
|
|
#define BMP280_MODE_MASK GENMASK(1, 0)
|
|
#define BMP280_MODE_SLEEP 0
|
|
#define BMP280_MODE_FORCED 1
|
|
#define BMP280_MODE_NORMAL 3
|
|
|
|
/* BMP180 specific registers */
|
|
#define BMP180_REG_OUT_XLSB 0xF8
|
|
#define BMP180_REG_OUT_LSB 0xF7
|
|
#define BMP180_REG_OUT_MSB 0xF6
|
|
|
|
#define BMP180_REG_CALIB_START 0xAA
|
|
#define BMP180_REG_CALIB_COUNT 22
|
|
|
|
#define BMP180_MEAS_CTRL_MASK GENMASK(4, 0)
|
|
#define BMP180_MEAS_TEMP 0x0E
|
|
#define BMP180_MEAS_PRESS 0x14
|
|
#define BMP180_MEAS_SCO BIT(5)
|
|
#define BMP180_OSRS_PRESS_MASK GENMASK(7, 6)
|
|
#define BMP180_MEAS_PRESS_1X 0
|
|
#define BMP180_MEAS_PRESS_2X 1
|
|
#define BMP180_MEAS_PRESS_4X 2
|
|
#define BMP180_MEAS_PRESS_8X 3
|
|
|
|
/* BMP180 and BMP280 common registers */
|
|
#define BMP280_REG_CTRL_MEAS 0xF4
|
|
#define BMP280_REG_RESET 0xE0
|
|
#define BMP280_REG_ID 0xD0
|
|
|
|
#define BMP380_CHIP_ID 0x50
|
|
#define BMP580_CHIP_ID 0x50
|
|
#define BMP580_CHIP_ID_ALT 0x51
|
|
#define BMP180_CHIP_ID 0x55
|
|
#define BMP280_CHIP_ID 0x58
|
|
#define BME280_CHIP_ID 0x60
|
|
#define BMP280_SOFT_RESET_VAL 0xB6
|
|
|
|
/* BMP280 register skipped special values */
|
|
#define BMP280_TEMP_SKIPPED 0x80000
|
|
#define BMP280_PRESS_SKIPPED 0x80000
|
|
#define BMP280_HUMIDITY_SKIPPED 0x8000
|
|
|
|
/* Core exported structs */
|
|
|
|
static const char *const bmp280_supply_names[] = {
|
|
"vddd", "vdda"
|
|
};
|
|
|
|
#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
|
|
|
|
struct bmp180_calib {
|
|
s16 AC1;
|
|
s16 AC2;
|
|
s16 AC3;
|
|
u16 AC4;
|
|
u16 AC5;
|
|
u16 AC6;
|
|
s16 B1;
|
|
s16 B2;
|
|
s16 MB;
|
|
s16 MC;
|
|
s16 MD;
|
|
};
|
|
|
|
/* See datasheet Section 4.2.2. */
|
|
struct bmp280_calib {
|
|
u16 T1;
|
|
s16 T2;
|
|
s16 T3;
|
|
u16 P1;
|
|
s16 P2;
|
|
s16 P3;
|
|
s16 P4;
|
|
s16 P5;
|
|
s16 P6;
|
|
s16 P7;
|
|
s16 P8;
|
|
s16 P9;
|
|
u8 H1;
|
|
s16 H2;
|
|
u8 H3;
|
|
s16 H4;
|
|
s16 H5;
|
|
s8 H6;
|
|
};
|
|
|
|
/* See datasheet Section 3.11.1. */
|
|
struct bmp380_calib {
|
|
u16 T1;
|
|
u16 T2;
|
|
s8 T3;
|
|
s16 P1;
|
|
s16 P2;
|
|
s8 P3;
|
|
s8 P4;
|
|
u16 P5;
|
|
u16 P6;
|
|
s8 P7;
|
|
s8 P8;
|
|
s16 P9;
|
|
s8 P10;
|
|
s8 P11;
|
|
};
|
|
|
|
struct bmp280_data {
|
|
struct device *dev;
|
|
struct mutex lock;
|
|
struct regmap *regmap;
|
|
struct completion done;
|
|
bool use_eoc;
|
|
const struct bmp280_chip_info *chip_info;
|
|
union {
|
|
struct bmp180_calib bmp180;
|
|
struct bmp280_calib bmp280;
|
|
struct bmp380_calib bmp380;
|
|
} calib;
|
|
struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
|
|
unsigned int start_up_time; /* in microseconds */
|
|
|
|
/* log of base 2 of oversampling rate */
|
|
u8 oversampling_press;
|
|
u8 oversampling_temp;
|
|
u8 oversampling_humid;
|
|
u8 iir_filter_coeff;
|
|
|
|
/*
|
|
* BMP380 devices introduce sampling frequency configuration. See
|
|
* datasheet sections 3.3.3. and 4.3.19 for more details.
|
|
*
|
|
* BMx280 devices allowed indirect configuration of sampling frequency
|
|
* changing the t_standby duration between measurements, as detailed on
|
|
* section 3.6.3 of the datasheet.
|
|
*/
|
|
int sampling_freq;
|
|
|
|
/*
|
|
* Carryover value from temperature conversion, used in pressure
|
|
* calculation.
|
|
*/
|
|
s32 t_fine;
|
|
|
|
/*
|
|
* DMA (thus cache coherency maintenance) may require the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
union {
|
|
/* Sensor data buffer */
|
|
u8 buf[3];
|
|
/* Calibration data buffers */
|
|
__le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2];
|
|
__be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2];
|
|
u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT];
|
|
/* Miscellaneous, endianess-aware data buffers */
|
|
__le16 le16;
|
|
__be16 be16;
|
|
} __aligned(IIO_DMA_MINALIGN);
|
|
};
|
|
|
|
struct bmp280_chip_info {
|
|
unsigned int id_reg;
|
|
const unsigned int chip_id;
|
|
|
|
const struct regmap_config *regmap_config;
|
|
|
|
const struct iio_chan_spec *channels;
|
|
int num_channels;
|
|
unsigned int start_up_time;
|
|
|
|
const int *oversampling_temp_avail;
|
|
int num_oversampling_temp_avail;
|
|
int oversampling_temp_default;
|
|
|
|
const int *oversampling_press_avail;
|
|
int num_oversampling_press_avail;
|
|
int oversampling_press_default;
|
|
|
|
const int *oversampling_humid_avail;
|
|
int num_oversampling_humid_avail;
|
|
int oversampling_humid_default;
|
|
|
|
const int *iir_filter_coeffs_avail;
|
|
int num_iir_filter_coeffs_avail;
|
|
int iir_filter_coeff_default;
|
|
|
|
const int (*sampling_freq_avail)[2];
|
|
int num_sampling_freq_avail;
|
|
int sampling_freq_default;
|
|
|
|
int (*chip_config)(struct bmp280_data *);
|
|
int (*read_temp)(struct bmp280_data *, int *, int *);
|
|
int (*read_press)(struct bmp280_data *, int *, int *);
|
|
int (*read_humid)(struct bmp280_data *, int *, int *);
|
|
int (*read_calib)(struct bmp280_data *);
|
|
int (*preinit)(struct bmp280_data *);
|
|
};
|
|
|
|
/* Chip infos for each variant */
|
|
extern const struct bmp280_chip_info bmp180_chip_info;
|
|
extern const struct bmp280_chip_info bmp280_chip_info;
|
|
extern const struct bmp280_chip_info bme280_chip_info;
|
|
extern const struct bmp280_chip_info bmp380_chip_info;
|
|
extern const struct bmp280_chip_info bmp580_chip_info;
|
|
|
|
/* Regmap configurations */
|
|
extern const struct regmap_config bmp180_regmap_config;
|
|
extern const struct regmap_config bmp280_regmap_config;
|
|
extern const struct regmap_config bmp380_regmap_config;
|
|
extern const struct regmap_config bmp580_regmap_config;
|
|
|
|
/* Probe called from different transports */
|
|
int bmp280_common_probe(struct device *dev,
|
|
struct regmap *regmap,
|
|
const struct bmp280_chip_info *,
|
|
const char *name,
|
|
int irq);
|
|
|
|
/* PM ops */
|
|
extern const struct dev_pm_ops bmp280_dev_pm_ops;
|