mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-24 04:34:08 +08:00
7a29fa05ae
The core twl chip is probed via i2c and the dev->driver->of_match_table is NULL, causing the driver to fail to probe. This partially reverts: commit 1e0c866887f4 ("mfd: Use device_get_match_data() in a bunch of drivers") Fixes: 1e0c866887f4 ("mfd: Use device_get_match_data() in a bunch of drivers") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20231029114843.15553-1-peter.ujfalusi@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
458 lines
13 KiB
C
458 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* twl6030-irq.c - TWL6030 irq support
|
|
*
|
|
* Copyright (C) 2005-2009 Texas Instruments, Inc.
|
|
*
|
|
* Modifications to defer interrupt handling to a kernel thread:
|
|
* Copyright (C) 2006 MontaVista Software, Inc.
|
|
*
|
|
* Based on tlv320aic23.c:
|
|
* Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
|
|
*
|
|
* Code cleanup and modifications to IRQ handler.
|
|
* by syed khasim <x0khasim@ti.com>
|
|
*
|
|
* TWL6030 specific code and IRQ handling changes by
|
|
* Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
|
|
* Balaji T K <balajitk@ti.com>
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/mfd/twl.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/of.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include "twl-core.h"
|
|
|
|
/*
|
|
* TWL6030 (unlike its predecessors, which had two level interrupt handling)
|
|
* three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
|
|
* It exposes status bits saying who has raised an interrupt. There are
|
|
* three mask registers that corresponds to these status registers, that
|
|
* enables/disables these interrupts.
|
|
*
|
|
* We set up IRQs starting at a platform-specified base. An interrupt map table,
|
|
* specifies mapping between interrupt number and the associated module.
|
|
*/
|
|
#define TWL6030_NR_IRQS 20
|
|
|
|
static int twl6030_interrupt_mapping[24] = {
|
|
PWR_INTR_OFFSET, /* Bit 0 PWRON */
|
|
PWR_INTR_OFFSET, /* Bit 1 RPWRON */
|
|
PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */
|
|
RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
|
|
RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
|
|
HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
|
|
SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
|
|
SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */
|
|
|
|
SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */
|
|
BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
|
|
SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
|
|
MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
|
|
RSV_INTR_OFFSET, /* Bit 12 Reserved */
|
|
MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */
|
|
MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */
|
|
GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
|
|
|
|
USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
|
|
USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
|
|
USBOTG_INTR_OFFSET, /* Bit 18 ID */
|
|
USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
|
|
CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
|
|
CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
|
|
CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
|
|
RSV_INTR_OFFSET, /* Bit 23 Reserved */
|
|
};
|
|
|
|
static int twl6032_interrupt_mapping[24] = {
|
|
PWR_INTR_OFFSET, /* Bit 0 PWRON */
|
|
PWR_INTR_OFFSET, /* Bit 1 RPWRON */
|
|
PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */
|
|
RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
|
|
RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
|
|
HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
|
|
SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
|
|
PWR_INTR_OFFSET, /* Bit 7 SPDURATION */
|
|
|
|
PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */
|
|
BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
|
|
SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
|
|
MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
|
|
MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */
|
|
MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */
|
|
GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */
|
|
GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
|
|
|
|
USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
|
|
USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
|
|
USBOTG_INTR_OFFSET, /* Bit 18 ID */
|
|
USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
|
|
CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
|
|
CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
|
|
CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
|
|
RSV_INTR_OFFSET, /* Bit 23 Reserved */
|
|
};
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
struct twl6030_irq {
|
|
unsigned int irq_base;
|
|
int twl_irq;
|
|
bool irq_wake_enabled;
|
|
atomic_t wakeirqs;
|
|
struct notifier_block pm_nb;
|
|
struct irq_chip irq_chip;
|
|
struct irq_domain *irq_domain;
|
|
const int *irq_mapping_tbl;
|
|
};
|
|
|
|
static struct twl6030_irq *twl6030_irq;
|
|
|
|
static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
|
|
unsigned long pm_event, void *unused)
|
|
{
|
|
int chained_wakeups;
|
|
struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq,
|
|
pm_nb);
|
|
|
|
switch (pm_event) {
|
|
case PM_SUSPEND_PREPARE:
|
|
chained_wakeups = atomic_read(&pdata->wakeirqs);
|
|
|
|
if (chained_wakeups && !pdata->irq_wake_enabled) {
|
|
if (enable_irq_wake(pdata->twl_irq))
|
|
pr_err("twl6030 IRQ wake enable failed\n");
|
|
else
|
|
pdata->irq_wake_enabled = true;
|
|
} else if (!chained_wakeups && pdata->irq_wake_enabled) {
|
|
disable_irq_wake(pdata->twl_irq);
|
|
pdata->irq_wake_enabled = false;
|
|
}
|
|
|
|
disable_irq(pdata->twl_irq);
|
|
break;
|
|
|
|
case PM_POST_SUSPEND:
|
|
enable_irq(pdata->twl_irq);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/*
|
|
* Threaded irq handler for the twl6030 interrupt.
|
|
* We query the interrupt controller in the twl6030 to determine
|
|
* which module is generating the interrupt request and call
|
|
* handle_nested_irq for that module.
|
|
*/
|
|
static irqreturn_t twl6030_irq_thread(int irq, void *data)
|
|
{
|
|
int i, ret;
|
|
union {
|
|
u8 bytes[4];
|
|
__le32 int_sts;
|
|
} sts;
|
|
u32 int_sts; /* sts.int_sts converted to CPU endianness */
|
|
struct twl6030_irq *pdata = data;
|
|
|
|
/* read INT_STS_A, B and C in one shot using a burst read */
|
|
ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3);
|
|
if (ret) {
|
|
pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
sts.bytes[3] = 0; /* Only 24 bits are valid*/
|
|
|
|
/*
|
|
* Since VBUS status bit is not reliable for VBUS disconnect
|
|
* use CHARGER VBUS detection status bit instead.
|
|
*/
|
|
if (sts.bytes[2] & 0x10)
|
|
sts.bytes[2] |= 0x08;
|
|
|
|
int_sts = le32_to_cpu(sts.int_sts);
|
|
for (i = 0; int_sts; int_sts >>= 1, i++)
|
|
if (int_sts & 0x1) {
|
|
int module_irq =
|
|
irq_find_mapping(pdata->irq_domain,
|
|
pdata->irq_mapping_tbl[i]);
|
|
if (module_irq)
|
|
handle_nested_irq(module_irq);
|
|
else
|
|
pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n",
|
|
i);
|
|
pr_debug("twl6030_irq: PIH ISR %u, virq%u\n",
|
|
i, module_irq);
|
|
}
|
|
|
|
/*
|
|
* NOTE:
|
|
* Simulation confirms that documentation is wrong w.r.t the
|
|
* interrupt status clear operation. A single *byte* write to
|
|
* any one of STS_A to STS_C register results in all three
|
|
* STS registers being reset. Since it does not matter which
|
|
* value is written, all three registers are cleared on a
|
|
* single byte write, so we just use 0x0 to clear.
|
|
*/
|
|
ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A);
|
|
if (ret)
|
|
pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
|
|
{
|
|
struct twl6030_irq *pdata = irq_data_get_irq_chip_data(d);
|
|
|
|
if (on)
|
|
atomic_inc(&pdata->wakeirqs);
|
|
else
|
|
atomic_dec(&pdata->wakeirqs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
|
|
{
|
|
int ret;
|
|
u8 unmask_value;
|
|
|
|
ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
|
|
REG_INT_STS_A + offset);
|
|
unmask_value &= (~(bit_mask));
|
|
ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
|
|
REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(twl6030_interrupt_unmask);
|
|
|
|
int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
|
|
{
|
|
int ret;
|
|
u8 mask_value;
|
|
|
|
ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
|
|
REG_INT_STS_A + offset);
|
|
mask_value |= (bit_mask);
|
|
ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
|
|
REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(twl6030_interrupt_mask);
|
|
|
|
int twl6030_mmc_card_detect_config(void)
|
|
{
|
|
int ret;
|
|
u8 reg_val = 0;
|
|
|
|
/* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
|
|
twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
|
|
REG_INT_MSK_LINE_B);
|
|
twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
|
|
REG_INT_MSK_STS_B);
|
|
/*
|
|
* Initially Configuring MMC_CTRL for receiving interrupts &
|
|
* Card status on TWL6030 for MMC1
|
|
*/
|
|
ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
|
|
if (ret < 0) {
|
|
pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
|
|
return ret;
|
|
}
|
|
reg_val &= ~VMMC_AUTO_OFF;
|
|
reg_val |= SW_FC;
|
|
ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
|
|
if (ret < 0) {
|
|
pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Configuring PullUp-PullDown register */
|
|
ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
|
|
TWL6030_CFG_INPUT_PUPD3);
|
|
if (ret < 0) {
|
|
pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
reg_val &= ~(MMC_PU | MMC_PD);
|
|
ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
|
|
TWL6030_CFG_INPUT_PUPD3);
|
|
if (ret < 0) {
|
|
pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return irq_find_mapping(twl6030_irq->irq_domain,
|
|
MMCDETECT_INTR_OFFSET);
|
|
}
|
|
EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
|
|
|
|
int twl6030_mmc_card_detect(struct device *dev, int slot)
|
|
{
|
|
int ret = -EIO;
|
|
u8 read_reg = 0;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
if (pdev->id) {
|
|
/* TWL6030 provide's Card detect support for
|
|
* only MMC1 controller.
|
|
*/
|
|
pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
|
|
return ret;
|
|
}
|
|
/*
|
|
* BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
|
|
* 0 - Card not present ,1 - Card present
|
|
*/
|
|
ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
|
|
TWL6030_MMCCTRL);
|
|
if (ret >= 0)
|
|
ret = read_reg & STS_MMC;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(twl6030_mmc_card_detect);
|
|
|
|
static int twl6030_irq_map(struct irq_domain *d, unsigned int virq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct twl6030_irq *pdata = d->host_data;
|
|
|
|
irq_set_chip_data(virq, pdata);
|
|
irq_set_chip_and_handler(virq, &pdata->irq_chip, handle_simple_irq);
|
|
irq_set_nested_thread(virq, true);
|
|
irq_set_parent(virq, pdata->twl_irq);
|
|
irq_set_noprobe(virq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq)
|
|
{
|
|
irq_set_chip_and_handler(virq, NULL, NULL);
|
|
irq_set_chip_data(virq, NULL);
|
|
}
|
|
|
|
static const struct irq_domain_ops twl6030_irq_domain_ops = {
|
|
.map = twl6030_irq_map,
|
|
.unmap = twl6030_irq_unmap,
|
|
.xlate = irq_domain_xlate_onetwocell,
|
|
};
|
|
|
|
static const struct of_device_id twl6030_of_match[] __maybe_unused = {
|
|
{.compatible = "ti,twl6030", &twl6030_interrupt_mapping},
|
|
{.compatible = "ti,twl6032", &twl6032_interrupt_mapping},
|
|
{ },
|
|
};
|
|
|
|
int twl6030_init_irq(struct device *dev, int irq_num)
|
|
{
|
|
struct device_node *node = dev->of_node;
|
|
int nr_irqs;
|
|
int status;
|
|
u8 mask[3];
|
|
const struct of_device_id *of_id;
|
|
|
|
of_id = of_match_device(twl6030_of_match, dev);
|
|
if (!of_id || !of_id->data) {
|
|
dev_err(dev, "Unknown TWL device model\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
nr_irqs = TWL6030_NR_IRQS;
|
|
|
|
twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL);
|
|
if (!twl6030_irq)
|
|
return -ENOMEM;
|
|
|
|
mask[0] = 0xFF;
|
|
mask[1] = 0xFF;
|
|
mask[2] = 0xFF;
|
|
|
|
/* mask all int lines */
|
|
status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3);
|
|
/* mask all int sts */
|
|
status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3);
|
|
/* clear INT_STS_A,B,C */
|
|
status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3);
|
|
|
|
if (status < 0) {
|
|
dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* install an irq handler for each of the modules;
|
|
* clone dummy irq_chip since PIH can't *do* anything
|
|
*/
|
|
twl6030_irq->irq_chip = dummy_irq_chip;
|
|
twl6030_irq->irq_chip.name = "twl6030";
|
|
twl6030_irq->irq_chip.irq_set_type = NULL;
|
|
twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake;
|
|
|
|
twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier;
|
|
atomic_set(&twl6030_irq->wakeirqs, 0);
|
|
twl6030_irq->irq_mapping_tbl = of_id->data;
|
|
|
|
twl6030_irq->irq_domain =
|
|
irq_domain_add_linear(node, nr_irqs,
|
|
&twl6030_irq_domain_ops, twl6030_irq);
|
|
if (!twl6030_irq->irq_domain) {
|
|
dev_err(dev, "Can't add irq_domain\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num);
|
|
|
|
/* install an irq handler to demultiplex the TWL6030 interrupt */
|
|
status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread,
|
|
IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq);
|
|
if (status < 0) {
|
|
dev_err(dev, "could not claim irq %d: %d\n", irq_num, status);
|
|
goto fail_irq;
|
|
}
|
|
|
|
twl6030_irq->twl_irq = irq_num;
|
|
register_pm_notifier(&twl6030_irq->pm_nb);
|
|
return 0;
|
|
|
|
fail_irq:
|
|
irq_domain_remove(twl6030_irq->irq_domain);
|
|
return status;
|
|
}
|
|
|
|
void twl6030_exit_irq(void)
|
|
{
|
|
if (twl6030_irq && twl6030_irq->twl_irq) {
|
|
unregister_pm_notifier(&twl6030_irq->pm_nb);
|
|
free_irq(twl6030_irq->twl_irq, NULL);
|
|
/*
|
|
* TODO: IRQ domain and allocated nested IRQ descriptors
|
|
* should be freed somehow here. Now It can't be done, because
|
|
* child devices will not be deleted during removing of
|
|
* TWL Core driver and they will still contain allocated
|
|
* virt IRQs in their Resources tables.
|
|
* The same prevents us from using devm_request_threaded_irq()
|
|
* in this module.
|
|
*/
|
|
}
|
|
}
|
|
|