mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 11:34:50 +08:00
385895fef6
If Slot Status indicates changes in both Data Link Layer Status and Presence Detect, prioritize the Link status change. When both events are observed, pciehp currently relies on the Slot Status Presence Detect State (PDS) to agree with the Link Status Data Link Layer Active status. The Presence Detect State, however, may be set to 1 through out-of-band presence detect even if the link is down, which creates conflicting events. Since the Link Status accurately reflects the reachability of the downstream bus, the Link Status event should take precedence over a Presence Detect event. Skip checking the PDC status if we handled a link event in the same handler. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
893 lines
24 KiB
C
893 lines
24 KiB
C
/*
|
|
* PCI Express PCI Hot Plug Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/time.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "../pci.h"
|
|
#include "pciehp.h"
|
|
|
|
static inline struct pci_dev *ctrl_dev(struct controller *ctrl)
|
|
{
|
|
return ctrl->pcie->port;
|
|
}
|
|
|
|
static irqreturn_t pcie_isr(int irq, void *dev_id);
|
|
static void start_int_poll_timer(struct controller *ctrl, int sec);
|
|
|
|
/* This is the interrupt polling timeout function. */
|
|
static void int_poll_timeout(unsigned long data)
|
|
{
|
|
struct controller *ctrl = (struct controller *)data;
|
|
|
|
/* Poll for interrupt events. regs == NULL => polling */
|
|
pcie_isr(0, ctrl);
|
|
|
|
init_timer(&ctrl->poll_timer);
|
|
if (!pciehp_poll_time)
|
|
pciehp_poll_time = 2; /* default polling interval is 2 sec */
|
|
|
|
start_int_poll_timer(ctrl, pciehp_poll_time);
|
|
}
|
|
|
|
/* This function starts the interrupt polling timer. */
|
|
static void start_int_poll_timer(struct controller *ctrl, int sec)
|
|
{
|
|
/* Clamp to sane value */
|
|
if ((sec <= 0) || (sec > 60))
|
|
sec = 2;
|
|
|
|
ctrl->poll_timer.function = &int_poll_timeout;
|
|
ctrl->poll_timer.data = (unsigned long)ctrl;
|
|
ctrl->poll_timer.expires = jiffies + sec * HZ;
|
|
add_timer(&ctrl->poll_timer);
|
|
}
|
|
|
|
static inline int pciehp_request_irq(struct controller *ctrl)
|
|
{
|
|
int retval, irq = ctrl->pcie->irq;
|
|
|
|
/* Install interrupt polling timer. Start with 10 sec delay */
|
|
if (pciehp_poll_mode) {
|
|
init_timer(&ctrl->poll_timer);
|
|
start_int_poll_timer(ctrl, 10);
|
|
return 0;
|
|
}
|
|
|
|
/* Installs the interrupt handler */
|
|
retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl);
|
|
if (retval)
|
|
ctrl_err(ctrl, "Cannot get irq %d for the hotplug controller\n",
|
|
irq);
|
|
return retval;
|
|
}
|
|
|
|
static inline void pciehp_free_irq(struct controller *ctrl)
|
|
{
|
|
if (pciehp_poll_mode)
|
|
del_timer_sync(&ctrl->poll_timer);
|
|
else
|
|
free_irq(ctrl->pcie->irq, ctrl);
|
|
}
|
|
|
|
static int pcie_poll_cmd(struct controller *ctrl, int timeout)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
|
|
while (true) {
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (slot_status == (u16) ~0) {
|
|
ctrl_info(ctrl, "%s: no response from device\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
|
|
if (slot_status & PCI_EXP_SLTSTA_CC) {
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_CC);
|
|
return 1;
|
|
}
|
|
if (timeout < 0)
|
|
break;
|
|
msleep(10);
|
|
timeout -= 10;
|
|
}
|
|
return 0; /* timeout */
|
|
}
|
|
|
|
static void pcie_wait_cmd(struct controller *ctrl)
|
|
{
|
|
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
|
|
unsigned long duration = msecs_to_jiffies(msecs);
|
|
unsigned long cmd_timeout = ctrl->cmd_started + duration;
|
|
unsigned long now, timeout;
|
|
int rc;
|
|
|
|
/*
|
|
* If the controller does not generate notifications for command
|
|
* completions, we never need to wait between writes.
|
|
*/
|
|
if (NO_CMD_CMPL(ctrl))
|
|
return;
|
|
|
|
if (!ctrl->cmd_busy)
|
|
return;
|
|
|
|
/*
|
|
* Even if the command has already timed out, we want to call
|
|
* pcie_poll_cmd() so it can clear PCI_EXP_SLTSTA_CC.
|
|
*/
|
|
now = jiffies;
|
|
if (time_before_eq(cmd_timeout, now))
|
|
timeout = 1;
|
|
else
|
|
timeout = cmd_timeout - now;
|
|
|
|
if (ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE &&
|
|
ctrl->slot_ctrl & PCI_EXP_SLTCTL_CCIE)
|
|
rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout);
|
|
else
|
|
rc = pcie_poll_cmd(ctrl, jiffies_to_msecs(timeout));
|
|
|
|
/*
|
|
* Controllers with errata like Intel CF118 don't generate
|
|
* completion notifications unless the power/indicator/interlock
|
|
* control bits are changed. On such controllers, we'll emit this
|
|
* timeout message when we wait for completion of commands that
|
|
* don't change those bits, e.g., commands that merely enable
|
|
* interrupts.
|
|
*/
|
|
if (!rc)
|
|
ctrl_info(ctrl, "Timeout on hotplug command %#06x (issued %u msec ago)\n",
|
|
ctrl->slot_ctrl,
|
|
jiffies_to_msecs(jiffies - ctrl->cmd_started));
|
|
}
|
|
|
|
static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
|
|
u16 mask, bool wait)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
mutex_lock(&ctrl->ctrl_lock);
|
|
|
|
/*
|
|
* Always wait for any previous command that might still be in progress
|
|
*/
|
|
pcie_wait_cmd(ctrl);
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
if (slot_ctrl == (u16) ~0) {
|
|
ctrl_info(ctrl, "%s: no response from device\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
slot_ctrl &= ~mask;
|
|
slot_ctrl |= (cmd & mask);
|
|
ctrl->cmd_busy = 1;
|
|
smp_mb();
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, slot_ctrl);
|
|
ctrl->cmd_started = jiffies;
|
|
ctrl->slot_ctrl = slot_ctrl;
|
|
|
|
/*
|
|
* Optionally wait for the hardware to be ready for a new command,
|
|
* indicating completion of the above issued command.
|
|
*/
|
|
if (wait)
|
|
pcie_wait_cmd(ctrl);
|
|
|
|
out:
|
|
mutex_unlock(&ctrl->ctrl_lock);
|
|
}
|
|
|
|
/**
|
|
* pcie_write_cmd - Issue controller command
|
|
* @ctrl: controller to which the command is issued
|
|
* @cmd: command value written to slot control register
|
|
* @mask: bitmask of slot control register to be modified
|
|
*/
|
|
static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
|
|
{
|
|
pcie_do_write_cmd(ctrl, cmd, mask, true);
|
|
}
|
|
|
|
/* Same as above without waiting for the hardware to latch */
|
|
static void pcie_write_cmd_nowait(struct controller *ctrl, u16 cmd, u16 mask)
|
|
{
|
|
pcie_do_write_cmd(ctrl, cmd, mask, false);
|
|
}
|
|
|
|
bool pciehp_check_link_active(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 lnk_status;
|
|
bool ret;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
|
|
ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
|
|
|
|
if (ret)
|
|
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __pcie_wait_link_active(struct controller *ctrl, bool active)
|
|
{
|
|
int timeout = 1000;
|
|
|
|
if (pciehp_check_link_active(ctrl) == active)
|
|
return;
|
|
while (timeout > 0) {
|
|
msleep(10);
|
|
timeout -= 10;
|
|
if (pciehp_check_link_active(ctrl) == active)
|
|
return;
|
|
}
|
|
ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n",
|
|
active ? "set" : "cleared");
|
|
}
|
|
|
|
static void pcie_wait_link_active(struct controller *ctrl)
|
|
{
|
|
__pcie_wait_link_active(ctrl, true);
|
|
}
|
|
|
|
static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
|
|
{
|
|
u32 l;
|
|
int count = 0;
|
|
int delay = 1000, step = 20;
|
|
bool found = false;
|
|
|
|
do {
|
|
found = pci_bus_read_dev_vendor_id(bus, devfn, &l, 0);
|
|
count++;
|
|
|
|
if (found)
|
|
break;
|
|
|
|
msleep(step);
|
|
delay -= step;
|
|
} while (delay > 0);
|
|
|
|
if (count > 1 && pciehp_debug)
|
|
printk(KERN_DEBUG "pci %04x:%02x:%02x.%d id reading try %d times with interval %d ms to get %08x\n",
|
|
pci_domain_nr(bus), bus->number, PCI_SLOT(devfn),
|
|
PCI_FUNC(devfn), count, step, l);
|
|
|
|
return found;
|
|
}
|
|
|
|
int pciehp_check_link_status(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
bool found;
|
|
u16 lnk_status;
|
|
|
|
/*
|
|
* Data Link Layer Link Active Reporting must be capable for
|
|
* hot-plug capable downstream port. But old controller might
|
|
* not implement it. In this case, we wait for 1000 ms.
|
|
*/
|
|
if (ctrl->link_active_reporting)
|
|
pcie_wait_link_active(ctrl);
|
|
else
|
|
msleep(1000);
|
|
|
|
/* wait 100ms before read pci conf, and try in 1s */
|
|
msleep(100);
|
|
found = pci_bus_check_dev(ctrl->pcie->port->subordinate,
|
|
PCI_DEVFN(0, 0));
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
|
|
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
|
|
if ((lnk_status & PCI_EXP_LNKSTA_LT) ||
|
|
!(lnk_status & PCI_EXP_LNKSTA_NLW)) {
|
|
ctrl_err(ctrl, "link training error: status %#06x\n",
|
|
lnk_status);
|
|
return -1;
|
|
}
|
|
|
|
pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
|
|
|
|
if (!found)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __pciehp_link_set(struct controller *ctrl, bool enable)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 lnk_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &lnk_ctrl);
|
|
|
|
if (enable)
|
|
lnk_ctrl &= ~PCI_EXP_LNKCTL_LD;
|
|
else
|
|
lnk_ctrl |= PCI_EXP_LNKCTL_LD;
|
|
|
|
pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, lnk_ctrl);
|
|
ctrl_dbg(ctrl, "%s: lnk_ctrl = %x\n", __func__, lnk_ctrl);
|
|
return 0;
|
|
}
|
|
|
|
static int pciehp_link_enable(struct controller *ctrl)
|
|
{
|
|
return __pciehp_link_set(ctrl, true);
|
|
}
|
|
|
|
int pciehp_get_raw_indicator_status(struct hotplug_slot *hotplug_slot,
|
|
u8 *status)
|
|
{
|
|
struct slot *slot = hotplug_slot->private;
|
|
struct pci_dev *pdev = ctrl_dev(slot->ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
*status = (slot_ctrl & (PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC)) >> 6;
|
|
return 0;
|
|
}
|
|
|
|
void pciehp_get_attention_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x, value read %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
|
|
|
|
switch (slot_ctrl & PCI_EXP_SLTCTL_AIC) {
|
|
case PCI_EXP_SLTCTL_ATTN_IND_ON:
|
|
*status = 1; /* On */
|
|
break;
|
|
case PCI_EXP_SLTCTL_ATTN_IND_BLINK:
|
|
*status = 2; /* Blink */
|
|
break;
|
|
case PCI_EXP_SLTCTL_ATTN_IND_OFF:
|
|
*status = 0; /* Off */
|
|
break;
|
|
default:
|
|
*status = 0xFF;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void pciehp_get_power_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x value read %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
|
|
|
|
switch (slot_ctrl & PCI_EXP_SLTCTL_PCC) {
|
|
case PCI_EXP_SLTCTL_PWR_ON:
|
|
*status = 1; /* On */
|
|
break;
|
|
case PCI_EXP_SLTCTL_PWR_OFF:
|
|
*status = 0; /* Off */
|
|
break;
|
|
default:
|
|
*status = 0xFF;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void pciehp_get_latch_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(slot->ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
*status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS);
|
|
}
|
|
|
|
void pciehp_get_adapter_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(slot->ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
*status = !!(slot_status & PCI_EXP_SLTSTA_PDS);
|
|
}
|
|
|
|
int pciehp_query_power_fault(struct slot *slot)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(slot->ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
return !!(slot_status & PCI_EXP_SLTSTA_PFD);
|
|
}
|
|
|
|
int pciehp_set_raw_indicator_status(struct hotplug_slot *hotplug_slot,
|
|
u8 status)
|
|
{
|
|
struct slot *slot = hotplug_slot->private;
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
pcie_write_cmd_nowait(ctrl, status << 6,
|
|
PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC);
|
|
return 0;
|
|
}
|
|
|
|
void pciehp_set_attention_status(struct slot *slot, u8 value)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_cmd;
|
|
|
|
if (!ATTN_LED(ctrl))
|
|
return;
|
|
|
|
switch (value) {
|
|
case 0: /* turn off */
|
|
slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_OFF;
|
|
break;
|
|
case 1: /* turn on */
|
|
slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_ON;
|
|
break;
|
|
case 2: /* turn blink */
|
|
slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_BLINK;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
pcie_write_cmd_nowait(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
|
|
}
|
|
|
|
void pciehp_green_led_on(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
if (!PWR_LED(ctrl))
|
|
return;
|
|
|
|
pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON,
|
|
PCI_EXP_SLTCTL_PIC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_IND_ON);
|
|
}
|
|
|
|
void pciehp_green_led_off(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
if (!PWR_LED(ctrl))
|
|
return;
|
|
|
|
pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
|
|
PCI_EXP_SLTCTL_PIC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_IND_OFF);
|
|
}
|
|
|
|
void pciehp_green_led_blink(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
if (!PWR_LED(ctrl))
|
|
return;
|
|
|
|
pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK,
|
|
PCI_EXP_SLTCTL_PIC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_IND_BLINK);
|
|
}
|
|
|
|
int pciehp_power_on_slot(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
int retval;
|
|
|
|
/* Clear sticky power-fault bit from previous power failures */
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (slot_status & PCI_EXP_SLTSTA_PFD)
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_PFD);
|
|
ctrl->power_fault_detected = 0;
|
|
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_ON);
|
|
|
|
retval = pciehp_link_enable(ctrl);
|
|
if (retval)
|
|
ctrl_err(ctrl, "%s: Can not enable the link!\n", __func__);
|
|
|
|
return retval;
|
|
}
|
|
|
|
void pciehp_power_off_slot(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_OFF, PCI_EXP_SLTCTL_PCC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_OFF);
|
|
}
|
|
|
|
static irqreturn_t pciehp_isr(int irq, void *dev_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *)dev_id;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
struct pci_bus *subordinate = pdev->subordinate;
|
|
struct pci_dev *dev;
|
|
struct slot *slot = ctrl->slot;
|
|
u16 status, events;
|
|
u8 present;
|
|
bool link;
|
|
|
|
/* Interrupts cannot originate from a controller that's asleep */
|
|
if (pdev->current_state == PCI_D3cold)
|
|
return IRQ_NONE;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
|
|
if (status == (u16) ~0) {
|
|
ctrl_info(ctrl, "%s: no response from device\n", __func__);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/*
|
|
* Slot Status contains plain status bits as well as event
|
|
* notification bits; right now we only want the event bits.
|
|
*/
|
|
events = status & (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
|
|
PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_CC |
|
|
PCI_EXP_SLTSTA_DLLSC);
|
|
if (!events)
|
|
return IRQ_NONE;
|
|
|
|
/* Capture link status before clearing interrupts */
|
|
if (events & PCI_EXP_SLTSTA_DLLSC)
|
|
link = pciehp_check_link_active(ctrl);
|
|
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events);
|
|
ctrl_dbg(ctrl, "pending interrupts %#06x from Slot Status\n", events);
|
|
|
|
/* Check Command Complete Interrupt Pending */
|
|
if (events & PCI_EXP_SLTSTA_CC) {
|
|
ctrl->cmd_busy = 0;
|
|
smp_mb();
|
|
wake_up(&ctrl->queue);
|
|
}
|
|
|
|
if (subordinate) {
|
|
list_for_each_entry(dev, &subordinate->devices, bus_list) {
|
|
if (dev->ignore_hotplug) {
|
|
ctrl_dbg(ctrl, "ignoring hotplug event %#06x (%s requested no hotplug)\n",
|
|
events, pci_name(dev));
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Check Attention Button Pressed */
|
|
if (events & PCI_EXP_SLTSTA_ABP) {
|
|
ctrl_info(ctrl, "Slot(%s): Attention button pressed\n",
|
|
slot_name(slot));
|
|
pciehp_queue_interrupt_event(slot, INT_BUTTON_PRESS);
|
|
}
|
|
|
|
/*
|
|
* Check Link Status Changed at higher precedence than Presence
|
|
* Detect Changed. The PDS value may be set to "card present" from
|
|
* out-of-band detection, which may be in conflict with a Link Down
|
|
* and cause the wrong event to queue.
|
|
*/
|
|
if (events & PCI_EXP_SLTSTA_DLLSC) {
|
|
ctrl_info(ctrl, "Slot(%s): Link %s\n", slot_name(slot),
|
|
link ? "Up" : "Down");
|
|
pciehp_queue_interrupt_event(slot, link ? INT_LINK_UP :
|
|
INT_LINK_DOWN);
|
|
} else if (events & PCI_EXP_SLTSTA_PDC) {
|
|
present = !!(status & PCI_EXP_SLTSTA_PDS);
|
|
ctrl_info(ctrl, "Slot(%s): Card %spresent\n", slot_name(slot),
|
|
present ? "" : "not ");
|
|
pciehp_queue_interrupt_event(slot, present ? INT_PRESENCE_ON :
|
|
INT_PRESENCE_OFF);
|
|
}
|
|
|
|
/* Check Power Fault Detected */
|
|
if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
|
|
ctrl->power_fault_detected = 1;
|
|
ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(slot));
|
|
pciehp_queue_interrupt_event(slot, INT_POWER_FAULT);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t pcie_isr(int irq, void *dev_id)
|
|
{
|
|
irqreturn_t rc, handled = IRQ_NONE;
|
|
|
|
/*
|
|
* To guarantee that all interrupt events are serviced, we need to
|
|
* re-inspect Slot Status register after clearing what is presumed
|
|
* to be the last pending interrupt.
|
|
*/
|
|
do {
|
|
rc = pciehp_isr(irq, dev_id);
|
|
if (rc == IRQ_HANDLED)
|
|
handled = IRQ_HANDLED;
|
|
} while (rc == IRQ_HANDLED);
|
|
|
|
/* Return IRQ_HANDLED if we handled one or more events */
|
|
return handled;
|
|
}
|
|
|
|
void pcie_enable_notification(struct controller *ctrl)
|
|
{
|
|
u16 cmd, mask;
|
|
|
|
/*
|
|
* TBD: Power fault detected software notification support.
|
|
*
|
|
* Power fault detected software notification is not enabled
|
|
* now, because it caused power fault detected interrupt storm
|
|
* on some machines. On those machines, power fault detected
|
|
* bit in the slot status register was set again immediately
|
|
* when it is cleared in the interrupt service routine, and
|
|
* next power fault detected interrupt was notified again.
|
|
*/
|
|
|
|
/*
|
|
* Always enable link events: thus link-up and link-down shall
|
|
* always be treated as hotplug and unplug respectively. Enable
|
|
* presence detect only if Attention Button is not present.
|
|
*/
|
|
cmd = PCI_EXP_SLTCTL_DLLSCE;
|
|
if (ATTN_BUTTN(ctrl))
|
|
cmd |= PCI_EXP_SLTCTL_ABPE;
|
|
else
|
|
cmd |= PCI_EXP_SLTCTL_PDCE;
|
|
if (!pciehp_poll_mode)
|
|
cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
|
|
|
|
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
|
|
PCI_EXP_SLTCTL_PFDE |
|
|
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
|
|
PCI_EXP_SLTCTL_DLLSCE);
|
|
|
|
pcie_write_cmd_nowait(ctrl, cmd, mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, cmd);
|
|
}
|
|
|
|
static void pcie_disable_notification(struct controller *ctrl)
|
|
{
|
|
u16 mask;
|
|
|
|
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
|
|
PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE |
|
|
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
|
|
PCI_EXP_SLTCTL_DLLSCE);
|
|
pcie_write_cmd(ctrl, 0, mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0);
|
|
}
|
|
|
|
/*
|
|
* pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary
|
|
* bus reset of the bridge, but at the same time we want to ensure that it is
|
|
* not seen as a hot-unplug, followed by the hot-plug of the device. Thus,
|
|
* disable link state notification and presence detection change notification
|
|
* momentarily, if we see that they could interfere. Also, clear any spurious
|
|
* events after.
|
|
*/
|
|
int pciehp_reset_slot(struct slot *slot, int probe)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 stat_mask = 0, ctrl_mask = 0;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
if (!ATTN_BUTTN(ctrl)) {
|
|
ctrl_mask |= PCI_EXP_SLTCTL_PDCE;
|
|
stat_mask |= PCI_EXP_SLTSTA_PDC;
|
|
}
|
|
ctrl_mask |= PCI_EXP_SLTCTL_DLLSCE;
|
|
stat_mask |= PCI_EXP_SLTSTA_DLLSC;
|
|
|
|
pcie_write_cmd(ctrl, 0, ctrl_mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0);
|
|
if (pciehp_poll_mode)
|
|
del_timer_sync(&ctrl->poll_timer);
|
|
|
|
pci_reset_bridge_secondary_bus(ctrl->pcie->port);
|
|
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, stat_mask);
|
|
pcie_write_cmd_nowait(ctrl, ctrl_mask, ctrl_mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, ctrl_mask);
|
|
if (pciehp_poll_mode)
|
|
int_poll_timeout(ctrl->poll_timer.data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pcie_init_notification(struct controller *ctrl)
|
|
{
|
|
if (pciehp_request_irq(ctrl))
|
|
return -1;
|
|
pcie_enable_notification(ctrl);
|
|
ctrl->notification_enabled = 1;
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_shutdown_notification(struct controller *ctrl)
|
|
{
|
|
if (ctrl->notification_enabled) {
|
|
pcie_disable_notification(ctrl);
|
|
pciehp_free_irq(ctrl);
|
|
ctrl->notification_enabled = 0;
|
|
}
|
|
}
|
|
|
|
static int pcie_init_slot(struct controller *ctrl)
|
|
{
|
|
struct slot *slot;
|
|
|
|
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
|
|
if (!slot)
|
|
return -ENOMEM;
|
|
|
|
slot->wq = alloc_workqueue("pciehp-%u", 0, 0, PSN(ctrl));
|
|
if (!slot->wq)
|
|
goto abort;
|
|
|
|
slot->ctrl = ctrl;
|
|
mutex_init(&slot->lock);
|
|
mutex_init(&slot->hotplug_lock);
|
|
INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
|
|
ctrl->slot = slot;
|
|
return 0;
|
|
abort:
|
|
kfree(slot);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void pcie_cleanup_slot(struct controller *ctrl)
|
|
{
|
|
struct slot *slot = ctrl->slot;
|
|
cancel_delayed_work(&slot->work);
|
|
destroy_workqueue(slot->wq);
|
|
kfree(slot);
|
|
}
|
|
|
|
static inline void dbg_ctrl(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl->pcie->port;
|
|
u16 reg16;
|
|
|
|
if (!pciehp_debug)
|
|
return;
|
|
|
|
ctrl_info(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, ®16);
|
|
ctrl_info(ctrl, "Slot Status : 0x%04x\n", reg16);
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, ®16);
|
|
ctrl_info(ctrl, "Slot Control : 0x%04x\n", reg16);
|
|
}
|
|
|
|
#define FLAG(x, y) (((x) & (y)) ? '+' : '-')
|
|
|
|
struct controller *pcie_init(struct pcie_device *dev)
|
|
{
|
|
struct controller *ctrl;
|
|
u32 slot_cap, link_cap;
|
|
struct pci_dev *pdev = dev->port;
|
|
|
|
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
|
|
if (!ctrl) {
|
|
dev_err(&dev->device, "%s: Out of memory\n", __func__);
|
|
goto abort;
|
|
}
|
|
ctrl->pcie = dev;
|
|
pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap);
|
|
|
|
if (pdev->hotplug_user_indicators)
|
|
slot_cap &= ~(PCI_EXP_SLTCAP_AIP | PCI_EXP_SLTCAP_PIP);
|
|
|
|
ctrl->slot_cap = slot_cap;
|
|
mutex_init(&ctrl->ctrl_lock);
|
|
init_waitqueue_head(&ctrl->queue);
|
|
dbg_ctrl(ctrl);
|
|
|
|
/* Check if Data Link Layer Link Active Reporting is implemented */
|
|
pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap);
|
|
if (link_cap & PCI_EXP_LNKCAP_DLLLARC)
|
|
ctrl->link_active_reporting = 1;
|
|
|
|
/* Clear all remaining event bits in Slot Status register */
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
|
|
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
|
|
PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC);
|
|
|
|
ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c\n",
|
|
(slot_cap & PCI_EXP_SLTCAP_PSN) >> 19,
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_ABP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_PCP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_MRLSP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_AIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_PIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_HPC),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_HPS),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_EIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_NCCS),
|
|
FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC));
|
|
|
|
if (pcie_init_slot(ctrl))
|
|
goto abort_ctrl;
|
|
|
|
return ctrl;
|
|
|
|
abort_ctrl:
|
|
kfree(ctrl);
|
|
abort:
|
|
return NULL;
|
|
}
|
|
|
|
void pciehp_release_ctrl(struct controller *ctrl)
|
|
{
|
|
pcie_shutdown_notification(ctrl);
|
|
pcie_cleanup_slot(ctrl);
|
|
kfree(ctrl);
|
|
}
|