mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 08:34:20 +08:00
79abca2b39
All implementations return 0 and the return value of mipi_dsi_drv_remove() is ignored anyhow. So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
370 lines
9.2 KiB
C
370 lines
9.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Mantix MLAF057WE51 5.7" MIPI-DSI panel driver
|
|
*
|
|
* Copyright (C) Purism SPC 2020
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/media-bus-format.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
#define DRV_NAME "panel-mantix-mlaf057we51"
|
|
|
|
/* Manufacturer specific Commands send via DSI */
|
|
#define MANTIX_CMD_OTP_STOP_RELOAD_MIPI 0x41
|
|
#define MANTIX_CMD_INT_CANCEL 0x4C
|
|
#define MANTIX_CMD_SPI_FINISH 0x90
|
|
|
|
struct mantix {
|
|
struct device *dev;
|
|
struct drm_panel panel;
|
|
|
|
struct gpio_desc *reset_gpio;
|
|
struct gpio_desc *tp_rstn_gpio;
|
|
|
|
struct regulator *avdd;
|
|
struct regulator *avee;
|
|
struct regulator *vddi;
|
|
|
|
const struct drm_display_mode *default_mode;
|
|
};
|
|
|
|
static inline struct mantix *panel_to_mantix(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct mantix, panel);
|
|
}
|
|
|
|
#define dsi_generic_write_seq(dsi, seq...) do { \
|
|
static const u8 d[] = { seq }; \
|
|
int ret; \
|
|
ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
|
|
if (ret < 0) \
|
|
return ret; \
|
|
} while (0)
|
|
|
|
static int mantix_init_sequence(struct mantix *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
struct device *dev = ctx->dev;
|
|
|
|
/*
|
|
* Init sequence was supplied by the panel vendor.
|
|
*/
|
|
dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A);
|
|
|
|
dsi_generic_write_seq(dsi, MANTIX_CMD_INT_CANCEL, 0x03);
|
|
dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A, 0x03);
|
|
dsi_generic_write_seq(dsi, 0x80, 0xA9, 0x00);
|
|
|
|
dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A, 0x09);
|
|
dsi_generic_write_seq(dsi, 0x80, 0x64, 0x00, 0x64, 0x00, 0x00);
|
|
msleep(20);
|
|
|
|
dsi_generic_write_seq(dsi, MANTIX_CMD_SPI_FINISH, 0xA5);
|
|
dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x00, 0x2F);
|
|
msleep(20);
|
|
|
|
dev_dbg(dev, "Panel init sequence done\n");
|
|
return 0;
|
|
}
|
|
|
|
static int mantix_enable(struct drm_panel *panel)
|
|
{
|
|
struct mantix *ctx = panel_to_mantix(panel);
|
|
struct device *dev = ctx->dev;
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
|
|
int ret;
|
|
|
|
ret = mantix_init_sequence(ctx);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to exit sleep mode\n");
|
|
return ret;
|
|
}
|
|
msleep(20);
|
|
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret)
|
|
return ret;
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = mipi_dsi_turn_on_peripheral(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to turn on peripheral\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mantix_disable(struct drm_panel *panel)
|
|
{
|
|
struct mantix *ctx = panel_to_mantix(panel);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
int ret;
|
|
|
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
|
if (ret < 0)
|
|
dev_err(ctx->dev, "Failed to turn off the display: %d\n", ret);
|
|
|
|
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
|
|
if (ret < 0)
|
|
dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mantix_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct mantix *ctx = panel_to_mantix(panel);
|
|
|
|
gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 1);
|
|
usleep_range(5000, 6000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
|
|
regulator_disable(ctx->avee);
|
|
regulator_disable(ctx->avdd);
|
|
/* T11 */
|
|
usleep_range(5000, 6000);
|
|
regulator_disable(ctx->vddi);
|
|
/* T14 */
|
|
msleep(50);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mantix_prepare(struct drm_panel *panel)
|
|
{
|
|
struct mantix *ctx = panel_to_mantix(panel);
|
|
int ret;
|
|
|
|
/* Focaltech FT8006P, section 7.3.1 and 7.3.4 */
|
|
dev_dbg(ctx->dev, "Resetting the panel\n");
|
|
ret = regulator_enable(ctx->vddi);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Failed to enable vddi supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* T1 + T2 */
|
|
usleep_range(8000, 10000);
|
|
|
|
ret = regulator_enable(ctx->avdd);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Failed to enable avdd supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* T2d */
|
|
usleep_range(3500, 4000);
|
|
ret = regulator_enable(ctx->avee);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Failed to enable avee supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* T3 + T4 + time for voltage to become stable: */
|
|
usleep_range(6000, 7000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 0);
|
|
|
|
/* T6 */
|
|
msleep(50);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_display_mode default_mode_mantix = {
|
|
.hdisplay = 720,
|
|
.hsync_start = 720 + 45,
|
|
.hsync_end = 720 + 45 + 14,
|
|
.htotal = 720 + 45 + 14 + 25,
|
|
.vdisplay = 1440,
|
|
.vsync_start = 1440 + 130,
|
|
.vsync_end = 1440 + 130 + 8,
|
|
.vtotal = 1440 + 130 + 8 + 106,
|
|
.clock = 85298,
|
|
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
|
.width_mm = 65,
|
|
.height_mm = 130,
|
|
};
|
|
|
|
static const struct drm_display_mode default_mode_ys = {
|
|
.hdisplay = 720,
|
|
.hsync_start = 720 + 45,
|
|
.hsync_end = 720 + 45 + 14,
|
|
.htotal = 720 + 45 + 14 + 25,
|
|
.vdisplay = 1440,
|
|
.vsync_start = 1440 + 175,
|
|
.vsync_end = 1440 + 175 + 8,
|
|
.vtotal = 1440 + 175 + 8 + 50,
|
|
.clock = 85298,
|
|
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
|
.width_mm = 65,
|
|
.height_mm = 130,
|
|
};
|
|
|
|
static const u32 mantix_bus_formats[] = {
|
|
MEDIA_BUS_FMT_RGB888_1X24,
|
|
};
|
|
|
|
static int mantix_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct mantix *ctx = panel_to_mantix(panel);
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, ctx->default_mode);
|
|
if (!mode) {
|
|
dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
|
|
ctx->default_mode->hdisplay, ctx->default_mode->vdisplay,
|
|
drm_mode_vrefresh(ctx->default_mode));
|
|
return -ENOMEM;
|
|
}
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
connector->display_info.width_mm = mode->width_mm;
|
|
connector->display_info.height_mm = mode->height_mm;
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
drm_display_info_set_bus_formats(&connector->display_info,
|
|
mantix_bus_formats,
|
|
ARRAY_SIZE(mantix_bus_formats));
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs mantix_drm_funcs = {
|
|
.disable = mantix_disable,
|
|
.unprepare = mantix_unprepare,
|
|
.prepare = mantix_prepare,
|
|
.enable = mantix_enable,
|
|
.get_modes = mantix_get_modes,
|
|
};
|
|
|
|
static int mantix_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct mantix *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
ctx->default_mode = of_device_get_match_data(dev);
|
|
|
|
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(ctx->reset_gpio)) {
|
|
dev_err(dev, "cannot get reset gpio\n");
|
|
return PTR_ERR(ctx->reset_gpio);
|
|
}
|
|
|
|
ctx->tp_rstn_gpio = devm_gpiod_get(dev, "mantix,tp-rstn", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(ctx->tp_rstn_gpio)) {
|
|
dev_err(dev, "cannot get tp-rstn gpio\n");
|
|
return PTR_ERR(ctx->tp_rstn_gpio);
|
|
}
|
|
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
ctx->dev = dev;
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
|
|
MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
|
|
|
|
ctx->avdd = devm_regulator_get(dev, "avdd");
|
|
if (IS_ERR(ctx->avdd))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->avdd), "Failed to request avdd regulator\n");
|
|
|
|
ctx->avee = devm_regulator_get(dev, "avee");
|
|
if (IS_ERR(ctx->avee))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->avee), "Failed to request avee regulator\n");
|
|
|
|
ctx->vddi = devm_regulator_get(dev, "vddi");
|
|
if (IS_ERR(ctx->vddi))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->vddi), "Failed to request vddi regulator\n");
|
|
|
|
drm_panel_init(&ctx->panel, dev, &mantix_drm_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
ret = drm_panel_of_backlight(&ctx->panel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "mipi_dsi_attach failed (%d). Is host ready?\n", ret);
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
dev_info(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
|
|
ctx->default_mode->hdisplay, ctx->default_mode->vdisplay,
|
|
drm_mode_vrefresh(ctx->default_mode),
|
|
mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mantix_shutdown(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct mantix *ctx = mipi_dsi_get_drvdata(dsi);
|
|
|
|
drm_panel_unprepare(&ctx->panel);
|
|
drm_panel_disable(&ctx->panel);
|
|
}
|
|
|
|
static void mantix_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct mantix *ctx = mipi_dsi_get_drvdata(dsi);
|
|
|
|
mantix_shutdown(dsi);
|
|
|
|
mipi_dsi_detach(dsi);
|
|
drm_panel_remove(&ctx->panel);
|
|
}
|
|
|
|
static const struct of_device_id mantix_of_match[] = {
|
|
{ .compatible = "mantix,mlaf057we51-x", .data = &default_mode_mantix },
|
|
{ .compatible = "ys,ys57pss36bh5gq", .data = &default_mode_ys },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mantix_of_match);
|
|
|
|
static struct mipi_dsi_driver mantix_driver = {
|
|
.probe = mantix_probe,
|
|
.remove = mantix_remove,
|
|
.shutdown = mantix_shutdown,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = mantix_of_match,
|
|
},
|
|
};
|
|
module_mipi_dsi_driver(mantix_driver);
|
|
|
|
MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
|
|
MODULE_DESCRIPTION("DRM driver for Mantix MLAF057WE51-X MIPI DSI panel");
|
|
MODULE_LICENSE("GPL v2");
|