linux/arch/arm64/mm/proc.S
Will Deacon fa0465fc07 arm64: assembler: Change order of macro arguments in phys_to_ttbr
Since AArch64 assembly instructions take the destination register as
their first operand, do the same thing for the phys_to_ttbr macro.

Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06 22:53:21 +00:00

454 lines
10 KiB
ArmAsm

/*
* Based on arch/arm/mm/proc.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
* Copyright (C) 2012 ARM Ltd.
* Author: Catalin Marinas <catalin.marinas@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/cpufeature.h>
#include <asm/alternative.h>
#ifdef CONFIG_ARM64_64K_PAGES
#define TCR_TG_FLAGS TCR_TG0_64K | TCR_TG1_64K
#elif defined(CONFIG_ARM64_16K_PAGES)
#define TCR_TG_FLAGS TCR_TG0_16K | TCR_TG1_16K
#else /* CONFIG_ARM64_4K_PAGES */
#define TCR_TG_FLAGS TCR_TG0_4K | TCR_TG1_4K
#endif
#define TCR_SMP_FLAGS TCR_SHARED
/* PTWs cacheable, inner/outer WBWA */
#define TCR_CACHE_FLAGS TCR_IRGN_WBWA | TCR_ORGN_WBWA
#define MAIR(attr, mt) ((attr) << ((mt) * 8))
/*
* cpu_do_idle()
*
* Idle the processor (wait for interrupt).
*/
ENTRY(cpu_do_idle)
dsb sy // WFI may enter a low-power mode
wfi
ret
ENDPROC(cpu_do_idle)
#ifdef CONFIG_CPU_PM
/**
* cpu_do_suspend - save CPU registers context
*
* x0: virtual address of context pointer
*/
ENTRY(cpu_do_suspend)
mrs x2, tpidr_el0
mrs x3, tpidrro_el0
mrs x4, contextidr_el1
mrs x5, cpacr_el1
mrs x6, tcr_el1
mrs x7, vbar_el1
mrs x8, mdscr_el1
mrs x9, oslsr_el1
mrs x10, sctlr_el1
alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
mrs x11, tpidr_el1
alternative_else
mrs x11, tpidr_el2
alternative_endif
mrs x12, sp_el0
stp x2, x3, [x0]
stp x4, xzr, [x0, #16]
stp x5, x6, [x0, #32]
stp x7, x8, [x0, #48]
stp x9, x10, [x0, #64]
stp x11, x12, [x0, #80]
ret
ENDPROC(cpu_do_suspend)
/**
* cpu_do_resume - restore CPU register context
*
* x0: Address of context pointer
*/
.pushsection ".idmap.text", "ax"
ENTRY(cpu_do_resume)
ldp x2, x3, [x0]
ldp x4, x5, [x0, #16]
ldp x6, x8, [x0, #32]
ldp x9, x10, [x0, #48]
ldp x11, x12, [x0, #64]
ldp x13, x14, [x0, #80]
msr tpidr_el0, x2
msr tpidrro_el0, x3
msr contextidr_el1, x4
msr cpacr_el1, x6
/* Don't change t0sz here, mask those bits when restoring */
mrs x5, tcr_el1
bfi x8, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
msr tcr_el1, x8
msr vbar_el1, x9
/*
* __cpu_setup() cleared MDSCR_EL1.MDE and friends, before unmasking
* debug exceptions. By restoring MDSCR_EL1 here, we may take a debug
* exception. Mask them until local_daif_restore() in cpu_suspend()
* resets them.
*/
disable_daif
msr mdscr_el1, x10
msr sctlr_el1, x12
alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
msr tpidr_el1, x13
alternative_else
msr tpidr_el2, x13
alternative_endif
msr sp_el0, x14
/*
* Restore oslsr_el1 by writing oslar_el1
*/
ubfx x11, x11, #1, #1
msr oslar_el1, x11
reset_pmuserenr_el0 x0 // Disable PMU access from EL0
alternative_if ARM64_HAS_RAS_EXTN
msr_s SYS_DISR_EL1, xzr
alternative_else_nop_endif
isb
ret
ENDPROC(cpu_do_resume)
.popsection
#endif
/*
* cpu_do_switch_mm(pgd_phys, tsk)
*
* Set the translation table base pointer to be pgd_phys.
*
* - pgd_phys - physical address of new TTB
*/
ENTRY(cpu_do_switch_mm)
mrs x2, ttbr1_el1
mmid x1, x1 // get mm->context.id
phys_to_ttbr x3, x0
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
bfi x3, x1, #48, #16 // set the ASID field in TTBR0
#endif
bfi x2, x1, #48, #16 // set the ASID
msr ttbr1_el1, x2 // in TTBR1 (since TCR.A1 is set)
isb
msr ttbr0_el1, x3 // now update TTBR0
isb
b post_ttbr_update_workaround // Back to C code...
ENDPROC(cpu_do_switch_mm)
.pushsection ".idmap.text", "ax"
.macro __idmap_cpu_set_reserved_ttbr1, tmp1, tmp2
adrp \tmp1, empty_zero_page
phys_to_ttbr \tmp2, \tmp1
msr ttbr1_el1, \tmp2
isb
tlbi vmalle1
dsb nsh
isb
.endm
/*
* void idmap_cpu_replace_ttbr1(phys_addr_t new_pgd)
*
* This is the low-level counterpart to cpu_replace_ttbr1, and should not be
* called by anything else. It can only be executed from a TTBR0 mapping.
*/
ENTRY(idmap_cpu_replace_ttbr1)
save_and_disable_daif flags=x2
__idmap_cpu_set_reserved_ttbr1 x1, x3
phys_to_ttbr x3, x0
msr ttbr1_el1, x3
isb
restore_daif x2
ret
ENDPROC(idmap_cpu_replace_ttbr1)
.popsection
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
.pushsection ".idmap.text", "ax"
.macro __idmap_kpti_get_pgtable_ent, type
dc cvac, cur_\()\type\()p // Ensure any existing dirty
dmb sy // lines are written back before
ldr \type, [cur_\()\type\()p] // loading the entry
tbz \type, #0, next_\()\type // Skip invalid entries
.endm
.macro __idmap_kpti_put_pgtable_ent_ng, type
orr \type, \type, #PTE_NG // Same bit for blocks and pages
str \type, [cur_\()\type\()p] // Update the entry and ensure it
dc civac, cur_\()\type\()p // is visible to all CPUs.
.endm
/*
* void __kpti_install_ng_mappings(int cpu, int num_cpus, phys_addr_t swapper)
*
* Called exactly once from stop_machine context by each CPU found during boot.
*/
__idmap_kpti_flag:
.long 1
ENTRY(idmap_kpti_install_ng_mappings)
cpu .req w0
num_cpus .req w1
swapper_pa .req x2
swapper_ttb .req x3
flag_ptr .req x4
cur_pgdp .req x5
end_pgdp .req x6
pgd .req x7
cur_pudp .req x8
end_pudp .req x9
pud .req x10
cur_pmdp .req x11
end_pmdp .req x12
pmd .req x13
cur_ptep .req x14
end_ptep .req x15
pte .req x16
mrs swapper_ttb, ttbr1_el1
adr flag_ptr, __idmap_kpti_flag
cbnz cpu, __idmap_kpti_secondary
/* We're the boot CPU. Wait for the others to catch up */
sevl
1: wfe
ldaxr w18, [flag_ptr]
eor w18, w18, num_cpus
cbnz w18, 1b
/* We need to walk swapper, so turn off the MMU. */
pre_disable_mmu_workaround
mrs x18, sctlr_el1
bic x18, x18, #SCTLR_ELx_M
msr sctlr_el1, x18
isb
/* Everybody is enjoying the idmap, so we can rewrite swapper. */
/* PGD */
mov cur_pgdp, swapper_pa
add end_pgdp, cur_pgdp, #(PTRS_PER_PGD * 8)
do_pgd: __idmap_kpti_get_pgtable_ent pgd
tbnz pgd, #1, walk_puds
__idmap_kpti_put_pgtable_ent_ng pgd
next_pgd:
add cur_pgdp, cur_pgdp, #8
cmp cur_pgdp, end_pgdp
b.ne do_pgd
/* Publish the updated tables and nuke all the TLBs */
dsb sy
tlbi vmalle1is
dsb ish
isb
/* We're done: fire up the MMU again */
mrs x18, sctlr_el1
orr x18, x18, #SCTLR_ELx_M
msr sctlr_el1, x18
isb
/* Set the flag to zero to indicate that we're all done */
str wzr, [flag_ptr]
ret
/* PUD */
walk_puds:
.if CONFIG_PGTABLE_LEVELS > 3
pte_to_phys cur_pudp, pgd
add end_pudp, cur_pudp, #(PTRS_PER_PUD * 8)
do_pud: __idmap_kpti_get_pgtable_ent pud
tbnz pud, #1, walk_pmds
__idmap_kpti_put_pgtable_ent_ng pud
next_pud:
add cur_pudp, cur_pudp, 8
cmp cur_pudp, end_pudp
b.ne do_pud
b next_pgd
.else /* CONFIG_PGTABLE_LEVELS <= 3 */
mov pud, pgd
b walk_pmds
next_pud:
b next_pgd
.endif
/* PMD */
walk_pmds:
.if CONFIG_PGTABLE_LEVELS > 2
pte_to_phys cur_pmdp, pud
add end_pmdp, cur_pmdp, #(PTRS_PER_PMD * 8)
do_pmd: __idmap_kpti_get_pgtable_ent pmd
tbnz pmd, #1, walk_ptes
__idmap_kpti_put_pgtable_ent_ng pmd
next_pmd:
add cur_pmdp, cur_pmdp, #8
cmp cur_pmdp, end_pmdp
b.ne do_pmd
b next_pud
.else /* CONFIG_PGTABLE_LEVELS <= 2 */
mov pmd, pud
b walk_ptes
next_pmd:
b next_pud
.endif
/* PTE */
walk_ptes:
pte_to_phys cur_ptep, pmd
add end_ptep, cur_ptep, #(PTRS_PER_PTE * 8)
do_pte: __idmap_kpti_get_pgtable_ent pte
__idmap_kpti_put_pgtable_ent_ng pte
next_pte:
add cur_ptep, cur_ptep, #8
cmp cur_ptep, end_ptep
b.ne do_pte
b next_pmd
/* Secondary CPUs end up here */
__idmap_kpti_secondary:
/* Uninstall swapper before surgery begins */
__idmap_cpu_set_reserved_ttbr1 x18, x17
/* Increment the flag to let the boot CPU we're ready */
1: ldxr w18, [flag_ptr]
add w18, w18, #1
stxr w17, w18, [flag_ptr]
cbnz w17, 1b
/* Wait for the boot CPU to finish messing around with swapper */
sevl
1: wfe
ldxr w18, [flag_ptr]
cbnz w18, 1b
/* All done, act like nothing happened */
msr ttbr1_el1, swapper_ttb
isb
ret
.unreq cpu
.unreq num_cpus
.unreq swapper_pa
.unreq swapper_ttb
.unreq flag_ptr
.unreq cur_pgdp
.unreq end_pgdp
.unreq pgd
.unreq cur_pudp
.unreq end_pudp
.unreq pud
.unreq cur_pmdp
.unreq end_pmdp
.unreq pmd
.unreq cur_ptep
.unreq end_ptep
.unreq pte
ENDPROC(idmap_kpti_install_ng_mappings)
.popsection
#endif
/*
* __cpu_setup
*
* Initialise the processor for turning the MMU on. Return in x0 the
* value of the SCTLR_EL1 register.
*/
.pushsection ".idmap.text", "ax"
ENTRY(__cpu_setup)
tlbi vmalle1 // Invalidate local TLB
dsb nsh
mov x0, #3 << 20
msr cpacr_el1, x0 // Enable FP/ASIMD
mov x0, #1 << 12 // Reset mdscr_el1 and disable
msr mdscr_el1, x0 // access to the DCC from EL0
isb // Unmask debug exceptions now,
enable_dbg // since this is per-cpu
reset_pmuserenr_el0 x0 // Disable PMU access from EL0
/*
* Memory region attributes for LPAE:
*
* n = AttrIndx[2:0]
* n MAIR
* DEVICE_nGnRnE 000 00000000
* DEVICE_nGnRE 001 00000100
* DEVICE_GRE 010 00001100
* NORMAL_NC 011 01000100
* NORMAL 100 11111111
* NORMAL_WT 101 10111011
*/
ldr x5, =MAIR(0x00, MT_DEVICE_nGnRnE) | \
MAIR(0x04, MT_DEVICE_nGnRE) | \
MAIR(0x0c, MT_DEVICE_GRE) | \
MAIR(0x44, MT_NORMAL_NC) | \
MAIR(0xff, MT_NORMAL) | \
MAIR(0xbb, MT_NORMAL_WT)
msr mair_el1, x5
/*
* Prepare SCTLR
*/
mov_q x0, SCTLR_EL1_SET
/*
* Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
* both user and kernel.
*/
ldr x10, =TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
TCR_TG_FLAGS | TCR_ASID16 | TCR_TBI0 | TCR_A1
tcr_set_idmap_t0sz x10, x9
/*
* Set the IPS bits in TCR_EL1.
*/
tcr_compute_pa_size x10, #TCR_IPS_SHIFT, x5, x6
#ifdef CONFIG_ARM64_HW_AFDBM
/*
* Hardware update of the Access and Dirty bits.
*/
mrs x9, ID_AA64MMFR1_EL1
and x9, x9, #0xf
cbz x9, 2f
cmp x9, #2
b.lt 1f
orr x10, x10, #TCR_HD // hardware Dirty flag update
1: orr x10, x10, #TCR_HA // hardware Access flag update
2:
#endif /* CONFIG_ARM64_HW_AFDBM */
msr tcr_el1, x10
ret // return to head.S
ENDPROC(__cpu_setup)