linux/drivers/misc/habanalabs/hw_queue.c
Oded Gabbay 926ba4cce1 habanalabs: handle barriers in DMA QMAN streams
When we have DMA QMAN with multiple streams, we need to know whether the
command buffer contains at least one DMA packet in order to configure the
barriers correctly when adding the 2xMSG_PROT at the end of the JOB. If
there is no DMA packet, then there is no need to put engine barrier. This
is relevant only for GAUDI as GOYA doesn't have streams so the engine can't
be busy by another stream.

Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17 12:06:22 +03:00

797 lines
20 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2016-2019 HabanaLabs, Ltd.
* All Rights Reserved.
*/
#include "habanalabs.h"
#include <linux/slab.h>
/*
* hl_queue_add_ptr - add to pi or ci and checks if it wraps around
*
* @ptr: the current pi/ci value
* @val: the amount to add
*
* Add val to ptr. It can go until twice the queue length.
*/
inline u32 hl_hw_queue_add_ptr(u32 ptr, u16 val)
{
ptr += val;
ptr &= ((HL_QUEUE_LENGTH << 1) - 1);
return ptr;
}
static inline int queue_free_slots(struct hl_hw_queue *q, u32 queue_len)
{
int delta = (q->pi - q->ci);
if (delta >= 0)
return (queue_len - delta);
else
return (abs(delta) - queue_len);
}
void hl_int_hw_queue_update_ci(struct hl_cs *cs)
{
struct hl_device *hdev = cs->ctx->hdev;
struct hl_hw_queue *q;
int i;
hdev->asic_funcs->hw_queues_lock(hdev);
if (hdev->disabled)
goto out;
q = &hdev->kernel_queues[0];
for (i = 0 ; i < HL_MAX_QUEUES ; i++, q++) {
if (q->queue_type == QUEUE_TYPE_INT) {
q->ci += cs->jobs_in_queue_cnt[i];
q->ci &= ((q->int_queue_len << 1) - 1);
}
}
out:
hdev->asic_funcs->hw_queues_unlock(hdev);
}
/*
* ext_and_hw_queue_submit_bd() - Submit a buffer descriptor to an external or a
* H/W queue.
* @hdev: pointer to habanalabs device structure
* @q: pointer to habanalabs queue structure
* @ctl: BD's control word
* @len: BD's length
* @ptr: BD's pointer
*
* This function assumes there is enough space on the queue to submit a new
* BD to it. It initializes the next BD and calls the device specific
* function to set the pi (and doorbell)
*
* This function must be called when the scheduler mutex is taken
*
*/
static void ext_and_hw_queue_submit_bd(struct hl_device *hdev,
struct hl_hw_queue *q, u32 ctl, u32 len, u64 ptr)
{
struct hl_bd *bd;
bd = (struct hl_bd *) (uintptr_t) q->kernel_address;
bd += hl_pi_2_offset(q->pi);
bd->ctl = cpu_to_le32(ctl);
bd->len = cpu_to_le32(len);
bd->ptr = cpu_to_le64(ptr);
q->pi = hl_queue_inc_ptr(q->pi);
hdev->asic_funcs->ring_doorbell(hdev, q->hw_queue_id, q->pi);
}
/*
* ext_queue_sanity_checks - perform some sanity checks on external queue
*
* @hdev : pointer to hl_device structure
* @q : pointer to hl_hw_queue structure
* @num_of_entries : how many entries to check for space
* @reserve_cq_entry : whether to reserve an entry in the cq
*
* H/W queues spinlock should be taken before calling this function
*
* Perform the following:
* - Make sure we have enough space in the h/w queue
* - Make sure we have enough space in the completion queue
* - Reserve space in the completion queue (needs to be reversed if there
* is a failure down the road before the actual submission of work). Only
* do this action if reserve_cq_entry is true
*
*/
static int ext_queue_sanity_checks(struct hl_device *hdev,
struct hl_hw_queue *q, int num_of_entries,
bool reserve_cq_entry)
{
atomic_t *free_slots =
&hdev->completion_queue[q->cq_id].free_slots_cnt;
int free_slots_cnt;
/* Check we have enough space in the queue */
free_slots_cnt = queue_free_slots(q, HL_QUEUE_LENGTH);
if (free_slots_cnt < num_of_entries) {
dev_dbg(hdev->dev, "Queue %d doesn't have room for %d CBs\n",
q->hw_queue_id, num_of_entries);
return -EAGAIN;
}
if (reserve_cq_entry) {
/*
* Check we have enough space in the completion queue
* Add -1 to counter (decrement) unless counter was already 0
* In that case, CQ is full so we can't submit a new CB because
* we won't get ack on its completion
* atomic_add_unless will return 0 if counter was already 0
*/
if (atomic_add_negative(num_of_entries * -1, free_slots)) {
dev_dbg(hdev->dev, "No space for %d on CQ %d\n",
num_of_entries, q->hw_queue_id);
atomic_add(num_of_entries, free_slots);
return -EAGAIN;
}
}
return 0;
}
/*
* int_queue_sanity_checks - perform some sanity checks on internal queue
*
* @hdev : pointer to hl_device structure
* @q : pointer to hl_hw_queue structure
* @num_of_entries : how many entries to check for space
*
* H/W queues spinlock should be taken before calling this function
*
* Perform the following:
* - Make sure we have enough space in the h/w queue
*
*/
static int int_queue_sanity_checks(struct hl_device *hdev,
struct hl_hw_queue *q,
int num_of_entries)
{
int free_slots_cnt;
/* Check we have enough space in the queue */
free_slots_cnt = queue_free_slots(q, q->int_queue_len);
if (free_slots_cnt < num_of_entries) {
dev_dbg(hdev->dev, "Queue %d doesn't have room for %d CBs\n",
q->hw_queue_id, num_of_entries);
return -EAGAIN;
}
return 0;
}
/*
* hw_queue_sanity_checks() - Perform some sanity checks on a H/W queue.
* @hdev: Pointer to hl_device structure.
* @q: Pointer to hl_hw_queue structure.
* @num_of_entries: How many entries to check for space.
*
* Perform the following:
* - Make sure we have enough space in the completion queue.
* This check also ensures that there is enough space in the h/w queue, as
* both queues are of the same size.
* - Reserve space in the completion queue (needs to be reversed if there
* is a failure down the road before the actual submission of work).
*
* Both operations are done using the "free_slots_cnt" field of the completion
* queue. The CI counters of the queue and the completion queue are not
* needed/used for the H/W queue type.
*/
static int hw_queue_sanity_checks(struct hl_device *hdev, struct hl_hw_queue *q,
int num_of_entries)
{
atomic_t *free_slots =
&hdev->completion_queue[q->cq_id].free_slots_cnt;
/*
* Check we have enough space in the completion queue.
* Add -1 to counter (decrement) unless counter was already 0.
* In that case, CQ is full so we can't submit a new CB.
* atomic_add_unless will return 0 if counter was already 0.
*/
if (atomic_add_negative(num_of_entries * -1, free_slots)) {
dev_dbg(hdev->dev, "No space for %d entries on CQ %d\n",
num_of_entries, q->hw_queue_id);
atomic_add(num_of_entries, free_slots);
return -EAGAIN;
}
return 0;
}
/*
* hl_hw_queue_send_cb_no_cmpl - send a single CB (not a JOB) without completion
*
* @hdev: pointer to hl_device structure
* @hw_queue_id: Queue's type
* @cb_size: size of CB
* @cb_ptr: pointer to CB location
*
* This function sends a single CB, that must NOT generate a completion entry
*
*/
int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
u32 cb_size, u64 cb_ptr)
{
struct hl_hw_queue *q = &hdev->kernel_queues[hw_queue_id];
int rc = 0;
/*
* The CPU queue is a synchronous queue with an effective depth of
* a single entry (although it is allocated with room for multiple
* entries). Therefore, there is a different lock, called
* send_cpu_message_lock, that serializes accesses to the CPU queue.
* As a result, we don't need to lock the access to the entire H/W
* queues module when submitting a JOB to the CPU queue
*/
if (q->queue_type != QUEUE_TYPE_CPU)
hdev->asic_funcs->hw_queues_lock(hdev);
if (hdev->disabled) {
rc = -EPERM;
goto out;
}
/*
* hl_hw_queue_send_cb_no_cmpl() is called for queues of a H/W queue
* type only on init phase, when the queues are empty and being tested,
* so there is no need for sanity checks.
*/
if (q->queue_type != QUEUE_TYPE_HW) {
rc = ext_queue_sanity_checks(hdev, q, 1, false);
if (rc)
goto out;
}
ext_and_hw_queue_submit_bd(hdev, q, 0, cb_size, cb_ptr);
out:
if (q->queue_type != QUEUE_TYPE_CPU)
hdev->asic_funcs->hw_queues_unlock(hdev);
return rc;
}
/*
* ext_queue_schedule_job - submit a JOB to an external queue
*
* @job: pointer to the job that needs to be submitted to the queue
*
* This function must be called when the scheduler mutex is taken
*
*/
static void ext_queue_schedule_job(struct hl_cs_job *job)
{
struct hl_device *hdev = job->cs->ctx->hdev;
struct hl_hw_queue *q = &hdev->kernel_queues[job->hw_queue_id];
struct hl_cq_entry cq_pkt;
struct hl_cq *cq;
u64 cq_addr;
struct hl_cb *cb;
u32 ctl;
u32 len;
u64 ptr;
/*
* Update the JOB ID inside the BD CTL so the device would know what
* to write in the completion queue
*/
ctl = ((q->pi << BD_CTL_SHADOW_INDEX_SHIFT) & BD_CTL_SHADOW_INDEX_MASK);
cb = job->patched_cb;
len = job->job_cb_size;
ptr = cb->bus_address;
cq_pkt.data = cpu_to_le32(
((q->pi << CQ_ENTRY_SHADOW_INDEX_SHIFT)
& CQ_ENTRY_SHADOW_INDEX_MASK) |
(1 << CQ_ENTRY_SHADOW_INDEX_VALID_SHIFT) |
(1 << CQ_ENTRY_READY_SHIFT));
/*
* No need to protect pi_offset because scheduling to the
* H/W queues is done under the scheduler mutex
*
* No need to check if CQ is full because it was already
* checked in ext_queue_sanity_checks
*/
cq = &hdev->completion_queue[q->cq_id];
cq_addr = cq->bus_address + cq->pi * sizeof(struct hl_cq_entry);
hdev->asic_funcs->add_end_of_cb_packets(hdev, cb->kernel_address, len,
cq_addr,
le32_to_cpu(cq_pkt.data),
q->msi_vec,
job->contains_dma_pkt);
q->shadow_queue[hl_pi_2_offset(q->pi)] = job;
cq->pi = hl_cq_inc_ptr(cq->pi);
ext_and_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
}
/*
* int_queue_schedule_job - submit a JOB to an internal queue
*
* @job: pointer to the job that needs to be submitted to the queue
*
* This function must be called when the scheduler mutex is taken
*
*/
static void int_queue_schedule_job(struct hl_cs_job *job)
{
struct hl_device *hdev = job->cs->ctx->hdev;
struct hl_hw_queue *q = &hdev->kernel_queues[job->hw_queue_id];
struct hl_bd bd;
__le64 *pi;
bd.ctl = 0;
bd.len = cpu_to_le32(job->job_cb_size);
bd.ptr = cpu_to_le64((u64) (uintptr_t) job->user_cb);
pi = (__le64 *) (uintptr_t) (q->kernel_address +
((q->pi & (q->int_queue_len - 1)) * sizeof(bd)));
q->pi++;
q->pi &= ((q->int_queue_len << 1) - 1);
hdev->asic_funcs->pqe_write(hdev, pi, &bd);
hdev->asic_funcs->ring_doorbell(hdev, q->hw_queue_id, q->pi);
}
/*
* hw_queue_schedule_job - submit a JOB to a H/W queue
*
* @job: pointer to the job that needs to be submitted to the queue
*
* This function must be called when the scheduler mutex is taken
*
*/
static void hw_queue_schedule_job(struct hl_cs_job *job)
{
struct hl_device *hdev = job->cs->ctx->hdev;
struct hl_hw_queue *q = &hdev->kernel_queues[job->hw_queue_id];
struct hl_cq *cq;
u64 ptr;
u32 offset, ctl, len;
/*
* Upon PQE completion, COMP_DATA is used as the write data to the
* completion queue (QMAN HBW message), and COMP_OFFSET is used as the
* write address offset in the SM block (QMAN LBW message).
* The write address offset is calculated as "COMP_OFFSET << 2".
*/
offset = job->cs->sequence & (HL_MAX_PENDING_CS - 1);
ctl = ((offset << BD_CTL_COMP_OFFSET_SHIFT) & BD_CTL_COMP_OFFSET_MASK) |
((q->pi << BD_CTL_COMP_DATA_SHIFT) & BD_CTL_COMP_DATA_MASK);
len = job->job_cb_size;
/*
* A patched CB is created only if a user CB was allocated by driver and
* MMU is disabled. If MMU is enabled, the user CB should be used
* instead. If the user CB wasn't allocated by driver, assume that it
* holds an address.
*/
if (job->patched_cb)
ptr = job->patched_cb->bus_address;
else if (job->is_kernel_allocated_cb)
ptr = job->user_cb->bus_address;
else
ptr = (u64) (uintptr_t) job->user_cb;
/*
* No need to protect pi_offset because scheduling to the
* H/W queues is done under the scheduler mutex
*
* No need to check if CQ is full because it was already
* checked in hw_queue_sanity_checks
*/
cq = &hdev->completion_queue[q->cq_id];
cq->pi = hl_cq_inc_ptr(cq->pi);
ext_and_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
}
/*
* hl_hw_queue_schedule_cs - schedule a command submission
*
* @job : pointer to the CS
*
*/
int hl_hw_queue_schedule_cs(struct hl_cs *cs)
{
struct hl_device *hdev = cs->ctx->hdev;
struct hl_cs_job *job, *tmp;
struct hl_hw_queue *q;
int rc = 0, i, cq_cnt;
hdev->asic_funcs->hw_queues_lock(hdev);
if (hl_device_disabled_or_in_reset(hdev)) {
dev_err(hdev->dev,
"device is disabled or in reset, CS rejected!\n");
rc = -EPERM;
goto out;
}
q = &hdev->kernel_queues[0];
for (i = 0, cq_cnt = 0 ; i < HL_MAX_QUEUES ; i++, q++) {
if (cs->jobs_in_queue_cnt[i]) {
switch (q->queue_type) {
case QUEUE_TYPE_EXT:
rc = ext_queue_sanity_checks(hdev, q,
cs->jobs_in_queue_cnt[i], true);
break;
case QUEUE_TYPE_INT:
rc = int_queue_sanity_checks(hdev, q,
cs->jobs_in_queue_cnt[i]);
break;
case QUEUE_TYPE_HW:
rc = hw_queue_sanity_checks(hdev, q,
cs->jobs_in_queue_cnt[i]);
break;
default:
dev_err(hdev->dev, "Queue type %d is invalid\n",
q->queue_type);
rc = -EINVAL;
break;
}
if (rc)
goto unroll_cq_resv;
if (q->queue_type == QUEUE_TYPE_EXT ||
q->queue_type == QUEUE_TYPE_HW)
cq_cnt++;
}
}
spin_lock(&hdev->hw_queues_mirror_lock);
list_add_tail(&cs->mirror_node, &hdev->hw_queues_mirror_list);
/* Queue TDR if the CS is the first entry and if timeout is wanted */
if ((hdev->timeout_jiffies != MAX_SCHEDULE_TIMEOUT) &&
(list_first_entry(&hdev->hw_queues_mirror_list,
struct hl_cs, mirror_node) == cs)) {
cs->tdr_active = true;
schedule_delayed_work(&cs->work_tdr, hdev->timeout_jiffies);
spin_unlock(&hdev->hw_queues_mirror_lock);
} else {
spin_unlock(&hdev->hw_queues_mirror_lock);
}
if (!hdev->cs_active_cnt++) {
struct hl_device_idle_busy_ts *ts;
ts = &hdev->idle_busy_ts_arr[hdev->idle_busy_ts_idx];
ts->busy_to_idle_ts = ktime_set(0, 0);
ts->idle_to_busy_ts = ktime_get();
}
list_for_each_entry_safe(job, tmp, &cs->job_list, cs_node)
switch (job->queue_type) {
case QUEUE_TYPE_EXT:
ext_queue_schedule_job(job);
break;
case QUEUE_TYPE_INT:
int_queue_schedule_job(job);
break;
case QUEUE_TYPE_HW:
hw_queue_schedule_job(job);
break;
default:
break;
}
cs->submitted = true;
goto out;
unroll_cq_resv:
q = &hdev->kernel_queues[0];
for (i = 0 ; (i < HL_MAX_QUEUES) && (cq_cnt > 0) ; i++, q++) {
if ((q->queue_type == QUEUE_TYPE_EXT ||
q->queue_type == QUEUE_TYPE_HW) &&
cs->jobs_in_queue_cnt[i]) {
atomic_t *free_slots =
&hdev->completion_queue[i].free_slots_cnt;
atomic_add(cs->jobs_in_queue_cnt[i], free_slots);
cq_cnt--;
}
}
out:
hdev->asic_funcs->hw_queues_unlock(hdev);
return rc;
}
/*
* hl_hw_queue_inc_ci_kernel - increment ci for kernel's queue
*
* @hdev: pointer to hl_device structure
* @hw_queue_id: which queue to increment its ci
*/
void hl_hw_queue_inc_ci_kernel(struct hl_device *hdev, u32 hw_queue_id)
{
struct hl_hw_queue *q = &hdev->kernel_queues[hw_queue_id];
q->ci = hl_queue_inc_ptr(q->ci);
}
static int ext_and_cpu_queue_init(struct hl_device *hdev, struct hl_hw_queue *q,
bool is_cpu_queue)
{
void *p;
int rc;
if (is_cpu_queue)
p = hdev->asic_funcs->cpu_accessible_dma_pool_alloc(hdev,
HL_QUEUE_SIZE_IN_BYTES,
&q->bus_address);
else
p = hdev->asic_funcs->asic_dma_alloc_coherent(hdev,
HL_QUEUE_SIZE_IN_BYTES,
&q->bus_address,
GFP_KERNEL | __GFP_ZERO);
if (!p)
return -ENOMEM;
q->kernel_address = (u64) (uintptr_t) p;
q->shadow_queue = kmalloc_array(HL_QUEUE_LENGTH,
sizeof(*q->shadow_queue),
GFP_KERNEL);
if (!q->shadow_queue) {
dev_err(hdev->dev,
"Failed to allocate shadow queue for H/W queue %d\n",
q->hw_queue_id);
rc = -ENOMEM;
goto free_queue;
}
/* Make sure read/write pointers are initialized to start of queue */
q->ci = 0;
q->pi = 0;
return 0;
free_queue:
if (is_cpu_queue)
hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev,
HL_QUEUE_SIZE_IN_BYTES,
(void *) (uintptr_t) q->kernel_address);
else
hdev->asic_funcs->asic_dma_free_coherent(hdev,
HL_QUEUE_SIZE_IN_BYTES,
(void *) (uintptr_t) q->kernel_address,
q->bus_address);
return rc;
}
static int int_queue_init(struct hl_device *hdev, struct hl_hw_queue *q)
{
void *p;
p = hdev->asic_funcs->get_int_queue_base(hdev, q->hw_queue_id,
&q->bus_address, &q->int_queue_len);
if (!p) {
dev_err(hdev->dev,
"Failed to get base address for internal queue %d\n",
q->hw_queue_id);
return -EFAULT;
}
q->kernel_address = (u64) (uintptr_t) p;
q->pi = 0;
q->ci = 0;
return 0;
}
static int cpu_queue_init(struct hl_device *hdev, struct hl_hw_queue *q)
{
return ext_and_cpu_queue_init(hdev, q, true);
}
static int ext_queue_init(struct hl_device *hdev, struct hl_hw_queue *q)
{
return ext_and_cpu_queue_init(hdev, q, false);
}
static int hw_queue_init(struct hl_device *hdev, struct hl_hw_queue *q)
{
void *p;
p = hdev->asic_funcs->asic_dma_alloc_coherent(hdev,
HL_QUEUE_SIZE_IN_BYTES,
&q->bus_address,
GFP_KERNEL | __GFP_ZERO);
if (!p)
return -ENOMEM;
q->kernel_address = (u64) (uintptr_t) p;
/* Make sure read/write pointers are initialized to start of queue */
q->ci = 0;
q->pi = 0;
return 0;
}
/*
* queue_init - main initialization function for H/W queue object
*
* @hdev: pointer to hl_device device structure
* @q: pointer to hl_hw_queue queue structure
* @hw_queue_id: The id of the H/W queue
*
* Allocate dma-able memory for the queue and initialize fields
* Returns 0 on success
*/
static int queue_init(struct hl_device *hdev, struct hl_hw_queue *q,
u32 hw_queue_id)
{
int rc;
BUILD_BUG_ON(HL_QUEUE_SIZE_IN_BYTES > HL_PAGE_SIZE);
q->hw_queue_id = hw_queue_id;
switch (q->queue_type) {
case QUEUE_TYPE_EXT:
rc = ext_queue_init(hdev, q);
break;
case QUEUE_TYPE_INT:
rc = int_queue_init(hdev, q);
break;
case QUEUE_TYPE_CPU:
rc = cpu_queue_init(hdev, q);
break;
case QUEUE_TYPE_HW:
rc = hw_queue_init(hdev, q);
break;
case QUEUE_TYPE_NA:
q->valid = 0;
return 0;
default:
dev_crit(hdev->dev, "wrong queue type %d during init\n",
q->queue_type);
rc = -EINVAL;
break;
}
if (rc)
return rc;
q->valid = 1;
return 0;
}
/*
* hw_queue_fini - destroy queue
*
* @hdev: pointer to hl_device device structure
* @q: pointer to hl_hw_queue queue structure
*
* Free the queue memory
*/
static void queue_fini(struct hl_device *hdev, struct hl_hw_queue *q)
{
if (!q->valid)
return;
/*
* If we arrived here, there are no jobs waiting on this queue
* so we can safely remove it.
* This is because this function can only called when:
* 1. Either a context is deleted, which only can occur if all its
* jobs were finished
* 2. A context wasn't able to be created due to failure or timeout,
* which means there are no jobs on the queue yet
*
* The only exception are the queues of the kernel context, but
* if they are being destroyed, it means that the entire module is
* being removed. If the module is removed, it means there is no open
* user context. It also means that if a job was submitted by
* the kernel driver (e.g. context creation), the job itself was
* released by the kernel driver when a timeout occurred on its
* Completion. Thus, we don't need to release it again.
*/
if (q->queue_type == QUEUE_TYPE_INT)
return;
kfree(q->shadow_queue);
if (q->queue_type == QUEUE_TYPE_CPU)
hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev,
HL_QUEUE_SIZE_IN_BYTES,
(void *) (uintptr_t) q->kernel_address);
else
hdev->asic_funcs->asic_dma_free_coherent(hdev,
HL_QUEUE_SIZE_IN_BYTES,
(void *) (uintptr_t) q->kernel_address,
q->bus_address);
}
int hl_hw_queues_create(struct hl_device *hdev)
{
struct asic_fixed_properties *asic = &hdev->asic_prop;
struct hl_hw_queue *q;
int i, rc, q_ready_cnt;
hdev->kernel_queues = kcalloc(HL_MAX_QUEUES,
sizeof(*hdev->kernel_queues), GFP_KERNEL);
if (!hdev->kernel_queues) {
dev_err(hdev->dev, "Not enough memory for H/W queues\n");
return -ENOMEM;
}
/* Initialize the H/W queues */
for (i = 0, q_ready_cnt = 0, q = hdev->kernel_queues;
i < HL_MAX_QUEUES ; i++, q_ready_cnt++, q++) {
q->queue_type = asic->hw_queues_props[i].type;
rc = queue_init(hdev, q, i);
if (rc) {
dev_err(hdev->dev,
"failed to initialize queue %d\n", i);
goto release_queues;
}
}
return 0;
release_queues:
for (i = 0, q = hdev->kernel_queues ; i < q_ready_cnt ; i++, q++)
queue_fini(hdev, q);
kfree(hdev->kernel_queues);
return rc;
}
void hl_hw_queues_destroy(struct hl_device *hdev)
{
struct hl_hw_queue *q;
int i;
for (i = 0, q = hdev->kernel_queues ; i < HL_MAX_QUEUES ; i++, q++)
queue_fini(hdev, q);
kfree(hdev->kernel_queues);
}
void hl_hw_queue_reset(struct hl_device *hdev, bool hard_reset)
{
struct hl_hw_queue *q;
int i;
for (i = 0, q = hdev->kernel_queues ; i < HL_MAX_QUEUES ; i++, q++) {
if ((!q->valid) ||
((!hard_reset) && (q->queue_type == QUEUE_TYPE_CPU)))
continue;
q->pi = q->ci = 0;
}
}