mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
3f52b7e328
Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
64 lines
1.3 KiB
Makefile
64 lines
1.3 KiB
Makefile
obj-$(CONFIG_MAC80211) += mac80211.o
|
|
|
|
# mac80211 objects
|
|
mac80211-y := \
|
|
main.o status.o \
|
|
sta_info.o \
|
|
wep.o \
|
|
wpa.o \
|
|
scan.o offchannel.o \
|
|
ht.o agg-tx.o agg-rx.o \
|
|
vht.o \
|
|
ibss.o \
|
|
iface.o \
|
|
rate.o \
|
|
michael.o \
|
|
tkip.o \
|
|
aes_ccm.o \
|
|
aes_cmac.o \
|
|
cfg.o \
|
|
rx.o \
|
|
spectmgmt.o \
|
|
tx.o \
|
|
key.o \
|
|
util.o \
|
|
wme.o \
|
|
event.o \
|
|
chan.o \
|
|
trace.o mlme.o
|
|
|
|
mac80211-$(CONFIG_MAC80211_LEDS) += led.o
|
|
mac80211-$(CONFIG_MAC80211_DEBUGFS) += \
|
|
debugfs.o \
|
|
debugfs_sta.o \
|
|
debugfs_netdev.o \
|
|
debugfs_key.o
|
|
|
|
mac80211-$(CONFIG_MAC80211_MESH) += \
|
|
mesh.o \
|
|
mesh_pathtbl.o \
|
|
mesh_plink.o \
|
|
mesh_hwmp.o \
|
|
mesh_sync.o \
|
|
mesh_ps.o
|
|
|
|
mac80211-$(CONFIG_PM) += pm.o
|
|
|
|
CFLAGS_trace.o := -I$(src)
|
|
|
|
# objects for PID algorithm
|
|
rc80211_pid-y := rc80211_pid_algo.o
|
|
rc80211_pid-$(CONFIG_MAC80211_DEBUGFS) += rc80211_pid_debugfs.o
|
|
|
|
rc80211_minstrel-y := rc80211_minstrel.o
|
|
rc80211_minstrel-$(CONFIG_MAC80211_DEBUGFS) += rc80211_minstrel_debugfs.o
|
|
|
|
rc80211_minstrel_ht-y := rc80211_minstrel_ht.o
|
|
rc80211_minstrel_ht-$(CONFIG_MAC80211_DEBUGFS) += rc80211_minstrel_ht_debugfs.o
|
|
|
|
mac80211-$(CONFIG_MAC80211_RC_PID) += $(rc80211_pid-y)
|
|
mac80211-$(CONFIG_MAC80211_RC_MINSTREL) += $(rc80211_minstrel-y)
|
|
mac80211-$(CONFIG_MAC80211_RC_MINSTREL_HT) += $(rc80211_minstrel_ht-y)
|
|
|
|
ccflags-y += -D__CHECK_ENDIAN__ -DDEBUG
|