mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 02:54:32 +08:00
f728f4bfc4
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs WDT endian mode ------------------------------------ IMX2+ LE Vybird LE LS1 BE LS2 LE Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
320 lines
8.8 KiB
C
320 lines
8.8 KiB
C
/*
|
|
* Watchdog driver for IMX2 and later processors
|
|
*
|
|
* Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de>
|
|
* Copyright (C) 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* some parts adapted by similar drivers from Darius Augulis and Vladimir
|
|
* Zapolskiy, additional improvements by Wim Van Sebroeck.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* NOTE: MX1 has a slightly different Watchdog than MX2 and later:
|
|
*
|
|
* MX1: MX2+:
|
|
* ---- -----
|
|
* Registers: 32-bit 16-bit
|
|
* Stopable timer: Yes No
|
|
* Need to enable clk: No Yes
|
|
* Halt on suspend: Manual Can be automatic
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define DRIVER_NAME "imx2-wdt"
|
|
|
|
#define IMX2_WDT_WCR 0x00 /* Control Register */
|
|
#define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */
|
|
#define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */
|
|
#define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */
|
|
#define IMX2_WDT_WCR_WDZST (1 << 0) /* -> Watchdog timer Suspend */
|
|
|
|
#define IMX2_WDT_WSR 0x02 /* Service Register */
|
|
#define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */
|
|
#define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */
|
|
|
|
#define IMX2_WDT_WRSR 0x04 /* Reset Status Register */
|
|
#define IMX2_WDT_WRSR_TOUT (1 << 1) /* -> Reset due to Timeout */
|
|
|
|
#define IMX2_WDT_MAX_TIME 128
|
|
#define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */
|
|
|
|
#define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8)
|
|
|
|
struct imx2_wdt_device {
|
|
struct clk *clk;
|
|
struct regmap *regmap;
|
|
struct timer_list timer; /* Pings the watchdog when closed */
|
|
struct watchdog_device wdog;
|
|
};
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
|
|
static unsigned timeout = IMX2_WDT_DEFAULT_TIME;
|
|
module_param(timeout, uint, 0);
|
|
MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
|
|
__MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")");
|
|
|
|
static const struct watchdog_info imx2_wdt_info = {
|
|
.identity = "imx2+ watchdog",
|
|
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
|
|
};
|
|
|
|
static inline void imx2_wdt_setup(struct watchdog_device *wdog)
|
|
{
|
|
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
|
|
u32 val;
|
|
|
|
regmap_read(wdev->regmap, IMX2_WDT_WCR, &val);
|
|
|
|
/* Suspend timer in low power mode, write once-only */
|
|
val |= IMX2_WDT_WCR_WDZST;
|
|
/* Strip the old watchdog Time-Out value */
|
|
val &= ~IMX2_WDT_WCR_WT;
|
|
/* Generate reset if WDOG times out */
|
|
val &= ~IMX2_WDT_WCR_WRE;
|
|
/* Keep Watchdog Disabled */
|
|
val &= ~IMX2_WDT_WCR_WDE;
|
|
/* Set the watchdog's Time-Out value */
|
|
val |= WDOG_SEC_TO_COUNT(wdog->timeout);
|
|
|
|
regmap_write(wdev->regmap, IMX2_WDT_WCR, val);
|
|
|
|
/* enable the watchdog */
|
|
val |= IMX2_WDT_WCR_WDE;
|
|
regmap_write(wdev->regmap, IMX2_WDT_WCR, val);
|
|
}
|
|
|
|
static inline bool imx2_wdt_is_running(struct imx2_wdt_device *wdev)
|
|
{
|
|
u32 val;
|
|
|
|
regmap_read(wdev->regmap, IMX2_WDT_WCR, &val);
|
|
|
|
return val & IMX2_WDT_WCR_WDE;
|
|
}
|
|
|
|
static int imx2_wdt_ping(struct watchdog_device *wdog)
|
|
{
|
|
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
|
|
|
|
regmap_write(wdev->regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ1);
|
|
regmap_write(wdev->regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ2);
|
|
return 0;
|
|
}
|
|
|
|
static void imx2_wdt_timer_ping(unsigned long arg)
|
|
{
|
|
struct watchdog_device *wdog = (struct watchdog_device *)arg;
|
|
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
|
|
|
|
/* ping it every wdog->timeout / 2 seconds to prevent reboot */
|
|
imx2_wdt_ping(wdog);
|
|
mod_timer(&wdev->timer, jiffies + wdog->timeout * HZ / 2);
|
|
}
|
|
|
|
static int imx2_wdt_set_timeout(struct watchdog_device *wdog,
|
|
unsigned int new_timeout)
|
|
{
|
|
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
|
|
|
|
regmap_update_bits(wdev->regmap, IMX2_WDT_WCR, IMX2_WDT_WCR_WT,
|
|
WDOG_SEC_TO_COUNT(new_timeout));
|
|
return 0;
|
|
}
|
|
|
|
static int imx2_wdt_start(struct watchdog_device *wdog)
|
|
{
|
|
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
|
|
|
|
if (imx2_wdt_is_running(wdev)) {
|
|
/* delete the timer that pings the watchdog after close */
|
|
del_timer_sync(&wdev->timer);
|
|
imx2_wdt_set_timeout(wdog, wdog->timeout);
|
|
} else
|
|
imx2_wdt_setup(wdog);
|
|
|
|
return imx2_wdt_ping(wdog);
|
|
}
|
|
|
|
static int imx2_wdt_stop(struct watchdog_device *wdog)
|
|
{
|
|
/*
|
|
* We don't need a clk_disable, it cannot be disabled once started.
|
|
* We use a timer to ping the watchdog while /dev/watchdog is closed
|
|
*/
|
|
imx2_wdt_timer_ping((unsigned long)wdog);
|
|
return 0;
|
|
}
|
|
|
|
static inline void imx2_wdt_ping_if_active(struct watchdog_device *wdog)
|
|
{
|
|
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
|
|
|
|
if (imx2_wdt_is_running(wdev)) {
|
|
imx2_wdt_set_timeout(wdog, wdog->timeout);
|
|
imx2_wdt_timer_ping((unsigned long)wdog);
|
|
}
|
|
}
|
|
|
|
static struct watchdog_ops imx2_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = imx2_wdt_start,
|
|
.stop = imx2_wdt_stop,
|
|
.ping = imx2_wdt_ping,
|
|
.set_timeout = imx2_wdt_set_timeout,
|
|
};
|
|
|
|
static struct regmap_config imx2_wdt_regmap_config = {
|
|
.reg_bits = 16,
|
|
.reg_stride = 2,
|
|
.val_bits = 16,
|
|
.max_register = 0x8,
|
|
};
|
|
|
|
static int __init imx2_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct imx2_wdt_device *wdev;
|
|
struct watchdog_device *wdog;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
bool big_endian;
|
|
int ret;
|
|
u32 val;
|
|
|
|
wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL);
|
|
if (!wdev)
|
|
return -ENOMEM;
|
|
|
|
big_endian = of_property_read_bool(np, "big-endian");
|
|
if (big_endian)
|
|
imx2_wdt_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
wdev->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
|
|
&imx2_wdt_regmap_config);
|
|
if (IS_ERR(wdev->regmap)) {
|
|
dev_err(&pdev->dev, "regmap init failed\n");
|
|
return PTR_ERR(wdev->regmap);
|
|
}
|
|
|
|
wdev->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(wdev->clk)) {
|
|
dev_err(&pdev->dev, "can't get Watchdog clock\n");
|
|
return PTR_ERR(wdev->clk);
|
|
}
|
|
|
|
wdog = &wdev->wdog;
|
|
wdog->info = &imx2_wdt_info;
|
|
wdog->ops = &imx2_wdt_ops;
|
|
wdog->min_timeout = 1;
|
|
wdog->max_timeout = IMX2_WDT_MAX_TIME;
|
|
|
|
clk_prepare_enable(wdev->clk);
|
|
|
|
regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val);
|
|
wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0;
|
|
|
|
wdog->timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME);
|
|
if (wdog->timeout != timeout)
|
|
dev_warn(&pdev->dev, "Initial timeout out of range! Clamped from %u to %u\n",
|
|
timeout, wdog->timeout);
|
|
|
|
platform_set_drvdata(pdev, wdog);
|
|
watchdog_set_drvdata(wdog, wdev);
|
|
watchdog_set_nowayout(wdog, nowayout);
|
|
watchdog_init_timeout(wdog, timeout, &pdev->dev);
|
|
|
|
setup_timer(&wdev->timer, imx2_wdt_timer_ping, (unsigned long)wdog);
|
|
|
|
imx2_wdt_ping_if_active(wdog);
|
|
|
|
ret = watchdog_register_device(wdog);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot register watchdog device\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "timeout %d sec (nowayout=%d)\n",
|
|
wdog->timeout, nowayout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __exit imx2_wdt_remove(struct platform_device *pdev)
|
|
{
|
|
struct watchdog_device *wdog = platform_get_drvdata(pdev);
|
|
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
|
|
|
|
watchdog_unregister_device(wdog);
|
|
|
|
if (imx2_wdt_is_running(wdev)) {
|
|
del_timer_sync(&wdev->timer);
|
|
imx2_wdt_ping(wdog);
|
|
dev_crit(&pdev->dev, "Device removed: Expect reboot!\n");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void imx2_wdt_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct watchdog_device *wdog = platform_get_drvdata(pdev);
|
|
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
|
|
|
|
if (imx2_wdt_is_running(wdev)) {
|
|
/*
|
|
* We are running, we need to delete the timer but will
|
|
* give max timeout before reboot will take place
|
|
*/
|
|
del_timer_sync(&wdev->timer);
|
|
imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);
|
|
imx2_wdt_ping(wdog);
|
|
dev_crit(&pdev->dev, "Device shutdown: Expect reboot!\n");
|
|
}
|
|
}
|
|
|
|
static const struct of_device_id imx2_wdt_dt_ids[] = {
|
|
{ .compatible = "fsl,imx21-wdt", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids);
|
|
|
|
static struct platform_driver imx2_wdt_driver = {
|
|
.remove = __exit_p(imx2_wdt_remove),
|
|
.shutdown = imx2_wdt_shutdown,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = imx2_wdt_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(imx2_wdt_driver, imx2_wdt_probe);
|
|
|
|
MODULE_AUTHOR("Wolfram Sang");
|
|
MODULE_DESCRIPTION("Watchdog driver for IMX2 and later");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|