mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 00:24:12 +08:00
f96576bd63
Currently the reset/power off handlers (POWER_RESET) and Adaptive Voltage Scaling class (POWER_AVS) are not built when POWER_SUPPLY is disabled. The POWER_RESET is also not visible in drivers main section of config. However they do not really depend on power supply so they can be built always. The objects for power supply drivers already depend on particular Kconfig symbols so there is no need for any changes in drivers/power/Makefile. This allows selecting POWER_RESET from main drivers config section and fixes following build warning (encountered on ARM exynos defconfig when POWER_SUPPLY is disabled manually): warning: (ARCH_HISI && ARCH_INTEGRATOR && ARCH_EXYNOS && ARCH_VEXPRESS && REALVIEW_DT) selects POWER_RESET which has unmet direct dependencies (POWER_SUPPLY) warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON_POWEROFF which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) Reported-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
509 lines
14 KiB
Plaintext
509 lines
14 KiB
Plaintext
menuconfig POWER_SUPPLY
|
|
bool "Power supply class support"
|
|
help
|
|
Say Y here to enable power supply class support. This allows
|
|
power supply (batteries, AC, USB) monitoring by userspace
|
|
via sysfs and uevent (if available) and/or APM kernel interface
|
|
(if selected below).
|
|
|
|
if POWER_SUPPLY
|
|
|
|
config POWER_SUPPLY_DEBUG
|
|
bool "Power supply debug"
|
|
help
|
|
Say Y here to enable debugging messages for power supply class
|
|
and drivers.
|
|
|
|
config PDA_POWER
|
|
tristate "Generic PDA/phone power driver"
|
|
depends on !S390
|
|
help
|
|
Say Y here to enable generic power driver for PDAs and phones with
|
|
one or two external power supplies (AC/USB) connected to main and
|
|
backup batteries, and optional builtin charger.
|
|
|
|
config APM_POWER
|
|
tristate "APM emulation for class batteries"
|
|
depends on APM_EMULATION
|
|
help
|
|
Say Y here to enable support APM status emulation using
|
|
battery class devices.
|
|
|
|
config GENERIC_ADC_BATTERY
|
|
tristate "Generic battery support using IIO"
|
|
depends on IIO
|
|
help
|
|
Say Y here to enable support for the generic battery driver
|
|
which uses IIO framework to read adc.
|
|
|
|
config MAX8925_POWER
|
|
tristate "MAX8925 battery charger support"
|
|
depends on MFD_MAX8925
|
|
help
|
|
Say Y here to enable support for the battery charger in the Maxim
|
|
MAX8925 PMIC.
|
|
|
|
config WM831X_BACKUP
|
|
tristate "WM831X backup battery charger support"
|
|
depends on MFD_WM831X
|
|
help
|
|
Say Y here to enable support for the backup battery charger
|
|
in the Wolfson Microelectronics WM831x PMICs.
|
|
|
|
config WM831X_POWER
|
|
tristate "WM831X PMU support"
|
|
depends on MFD_WM831X
|
|
help
|
|
Say Y here to enable support for the power management unit
|
|
provided by Wolfson Microelectronics WM831x PMICs.
|
|
|
|
config WM8350_POWER
|
|
tristate "WM8350 PMU support"
|
|
depends on MFD_WM8350
|
|
help
|
|
Say Y here to enable support for the power management unit
|
|
provided by the Wolfson Microelectronics WM8350 PMIC.
|
|
|
|
config TEST_POWER
|
|
tristate "Test power driver"
|
|
help
|
|
This driver is used for testing. It's safe to say M here.
|
|
|
|
config BATTERY_88PM860X
|
|
tristate "Marvell 88PM860x battery driver"
|
|
depends on MFD_88PM860X
|
|
help
|
|
Say Y here to enable battery monitor for Marvell 88PM860x chip.
|
|
|
|
config BATTERY_DS2760
|
|
tristate "DS2760 battery driver (HP iPAQ & others)"
|
|
depends on W1 && W1_SLAVE_DS2760
|
|
help
|
|
Say Y here to enable support for batteries with ds2760 chip.
|
|
|
|
config BATTERY_DS2780
|
|
tristate "DS2780 battery driver"
|
|
depends on HAS_IOMEM
|
|
select W1
|
|
select W1_SLAVE_DS2780
|
|
help
|
|
Say Y here to enable support for batteries with ds2780 chip.
|
|
|
|
config BATTERY_DS2781
|
|
tristate "DS2781 battery driver"
|
|
depends on HAS_IOMEM
|
|
select W1
|
|
select W1_SLAVE_DS2781
|
|
help
|
|
If you enable this you will have the DS2781 battery driver support.
|
|
|
|
The battery monitor chip is used in many batteries/devices
|
|
as the one who is responsible for charging/discharging/monitoring
|
|
Li+ batteries.
|
|
|
|
If you are unsure, say N.
|
|
|
|
config BATTERY_DS2782
|
|
tristate "DS2782/DS2786 standalone gas-gauge"
|
|
depends on I2C
|
|
help
|
|
Say Y here to enable support for the DS2782/DS2786 standalone battery
|
|
gas-gauge.
|
|
|
|
config BATTERY_PMU
|
|
tristate "Apple PMU battery"
|
|
depends on PPC32 && ADB_PMU
|
|
help
|
|
Say Y here to expose battery information on Apple machines
|
|
through the generic battery class.
|
|
|
|
config BATTERY_OLPC
|
|
tristate "One Laptop Per Child battery"
|
|
depends on X86_32 && OLPC
|
|
help
|
|
Say Y to enable support for the battery on the OLPC laptop.
|
|
|
|
config BATTERY_TOSA
|
|
tristate "Sharp SL-6000 (tosa) battery"
|
|
depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
|
|
help
|
|
Say Y to enable support for the battery on the Sharp Zaurus
|
|
SL-6000 (tosa) models.
|
|
|
|
config BATTERY_COLLIE
|
|
tristate "Sharp SL-5500 (collie) battery"
|
|
depends on SA1100_COLLIE && MCP_UCB1200
|
|
help
|
|
Say Y to enable support for the battery on the Sharp Zaurus
|
|
SL-5500 (collie) models.
|
|
|
|
config BATTERY_IPAQ_MICRO
|
|
tristate "iPAQ Atmel Micro ASIC battery driver"
|
|
depends on MFD_IPAQ_MICRO
|
|
help
|
|
Choose this option if you want to monitor battery status on
|
|
Compaq/HP iPAQ h3100 and h3600.
|
|
|
|
config BATTERY_WM97XX
|
|
bool "WM97xx generic battery driver"
|
|
depends on TOUCHSCREEN_WM97XX=y
|
|
help
|
|
Say Y to enable support for battery measured by WM97xx aux port.
|
|
|
|
config BATTERY_SBS
|
|
tristate "SBS Compliant gas gauge"
|
|
depends on I2C
|
|
help
|
|
Say Y to include support for SBS battery driver for SBS-compliant
|
|
gas gauges.
|
|
|
|
config BATTERY_BQ27XXX
|
|
tristate "BQ27xxx battery driver"
|
|
help
|
|
Say Y here to enable support for batteries with BQ27xxx chips.
|
|
|
|
config BATTERY_BQ27XXX_I2C
|
|
tristate "BQ27xxx I2C support"
|
|
depends on BATTERY_BQ27XXX
|
|
depends on I2C
|
|
default y
|
|
help
|
|
Say Y here to enable support for batteries with BQ27xxx chips
|
|
connected over an I2C bus.
|
|
|
|
config BATTERY_DA9030
|
|
tristate "DA9030 battery driver"
|
|
depends on PMIC_DA903X
|
|
help
|
|
Say Y here to enable support for batteries charger integrated into
|
|
DA9030 PMIC.
|
|
|
|
config BATTERY_DA9052
|
|
tristate "Dialog DA9052 Battery"
|
|
depends on PMIC_DA9052
|
|
help
|
|
Say Y here to enable support for batteries charger integrated into
|
|
DA9052 PMIC.
|
|
|
|
config CHARGER_DA9150
|
|
tristate "Dialog Semiconductor DA9150 Charger support"
|
|
depends on MFD_DA9150
|
|
depends on DA9150_GPADC
|
|
depends on IIO
|
|
help
|
|
Say Y here to enable support for charger unit of the DA9150
|
|
Integrated Charger & Fuel-Gauge IC.
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called da9150-charger.
|
|
|
|
config BATTERY_DA9150
|
|
tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
|
|
depends on MFD_DA9150
|
|
help
|
|
Say Y here to enable support for the Fuel-Gauge unit of the DA9150
|
|
Integrated Charger & Fuel-Gauge IC
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called da9150-fg.
|
|
|
|
config AXP288_CHARGER
|
|
tristate "X-Powers AXP288 Charger"
|
|
depends on MFD_AXP20X && EXTCON_AXP288
|
|
help
|
|
Say yes here to have support X-Power AXP288 power management IC (PMIC)
|
|
integrated charger.
|
|
|
|
config AXP288_FUEL_GAUGE
|
|
tristate "X-Powers AXP288 Fuel Gauge"
|
|
depends on MFD_AXP20X && IIO
|
|
help
|
|
Say yes here to have support for X-Power power management IC (PMIC)
|
|
Fuel Gauge. The device provides battery statistics and status
|
|
monitoring as well as alerts for battery over/under voltage and
|
|
over/under temperature.
|
|
|
|
config BATTERY_MAX17040
|
|
tristate "Maxim MAX17040 Fuel Gauge"
|
|
depends on I2C
|
|
help
|
|
MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
|
|
in handheld and portable equipment. The MAX17040 is configured
|
|
to operate with a single lithium cell
|
|
|
|
config BATTERY_MAX17042
|
|
tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
|
|
in handheld and portable equipment. The MAX17042 is configured
|
|
to operate with a single lithium cell. MAX8997 and MAX8966 are
|
|
multi-function devices that include fuel gauages that are compatible
|
|
with MAX17042. This driver also supports max17047/50 chips which are
|
|
improved version of max17042.
|
|
|
|
config BATTERY_Z2
|
|
tristate "Z2 battery driver"
|
|
depends on I2C && MACH_ZIPIT2
|
|
help
|
|
Say Y to include support for the battery on the Zipit Z2.
|
|
|
|
config BATTERY_S3C_ADC
|
|
tristate "Battery driver for Samsung ADC based monitoring"
|
|
depends on S3C_ADC
|
|
help
|
|
Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
|
|
|
|
config BATTERY_TWL4030_MADC
|
|
tristate "TWL4030 MADC battery driver"
|
|
depends on TWL4030_MADC
|
|
help
|
|
Say Y here to enable this dumb driver for batteries managed
|
|
through the TWL4030 MADC.
|
|
|
|
config CHARGER_88PM860X
|
|
tristate "Marvell 88PM860x Charger driver"
|
|
depends on MFD_88PM860X && BATTERY_88PM860X
|
|
help
|
|
Say Y here to enable charger for Marvell 88PM860x chip.
|
|
|
|
config CHARGER_PCF50633
|
|
tristate "NXP PCF50633 MBC"
|
|
depends on MFD_PCF50633
|
|
help
|
|
Say Y to include support for NXP PCF50633 Main Battery Charger.
|
|
|
|
config BATTERY_JZ4740
|
|
tristate "Ingenic JZ4740 battery"
|
|
depends on MACH_JZ4740
|
|
depends on MFD_JZ4740_ADC
|
|
help
|
|
Say Y to enable support for the battery on Ingenic JZ4740 based
|
|
boards.
|
|
|
|
This driver can be build as a module. If so, the module will be
|
|
called jz4740-battery.
|
|
|
|
config BATTERY_INTEL_MID
|
|
tristate "Battery driver for Intel MID platforms"
|
|
depends on INTEL_SCU_IPC && SPI
|
|
help
|
|
Say Y here to enable the battery driver on Intel MID
|
|
platforms.
|
|
|
|
config BATTERY_RX51
|
|
tristate "Nokia RX-51 (N900) battery driver"
|
|
depends on TWL4030_MADC
|
|
help
|
|
Say Y here to enable support for battery information on Nokia
|
|
RX-51, also known as N900 tablet.
|
|
|
|
config CHARGER_ISP1704
|
|
tristate "ISP1704 USB Charger Detection"
|
|
depends on USB_PHY
|
|
help
|
|
Say Y to enable support for USB Charger Detection with
|
|
ISP1707/ISP1704 USB transceivers.
|
|
|
|
config CHARGER_MAX8903
|
|
tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
|
|
help
|
|
Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
|
|
The driver supports controlling charger-enable and current-limit
|
|
pins based on the status of charger connections with interrupt
|
|
handlers.
|
|
|
|
config CHARGER_TWL4030
|
|
tristate "OMAP TWL4030 BCI charger driver"
|
|
depends on IIO && TWL4030_CORE
|
|
help
|
|
Say Y here to enable support for TWL4030 Battery Charge Interface.
|
|
|
|
config CHARGER_LP8727
|
|
tristate "TI/National Semiconductor LP8727 charger driver"
|
|
depends on I2C
|
|
help
|
|
Say Y here to enable support for LP8727 Charger Driver.
|
|
|
|
config CHARGER_LP8788
|
|
tristate "TI LP8788 charger driver"
|
|
depends on MFD_LP8788
|
|
depends on LP8788_ADC
|
|
depends on IIO
|
|
help
|
|
Say Y to enable support for the LP8788 linear charger.
|
|
|
|
config CHARGER_GPIO
|
|
tristate "GPIO charger"
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y to include support for chargers which report their online status
|
|
through a GPIO pin.
|
|
|
|
This driver can be build as a module. If so, the module will be
|
|
called gpio-charger.
|
|
|
|
config CHARGER_MANAGER
|
|
bool "Battery charger manager for multiple chargers"
|
|
depends on REGULATOR
|
|
select EXTCON
|
|
help
|
|
Say Y to enable charger-manager support, which allows multiple
|
|
chargers attached to a battery and multiple batteries attached to a
|
|
system. The charger-manager also can monitor charging status in
|
|
runtime and in suspend-to-RAM by waking up the system periodically
|
|
with help of suspend_again support.
|
|
|
|
config CHARGER_MAX14577
|
|
tristate "Maxim MAX14577/77836 battery charger driver"
|
|
depends on MFD_MAX14577
|
|
help
|
|
Say Y to enable support for the battery charger control sysfs and
|
|
platform data of MAX14577/77836 MUICs.
|
|
|
|
config CHARGER_MAX77693
|
|
tristate "Maxim MAX77693 battery charger driver"
|
|
depends on MFD_MAX77693
|
|
help
|
|
Say Y to enable support for the Maxim MAX77693 battery charger.
|
|
|
|
config CHARGER_MAX8997
|
|
tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
|
|
depends on MFD_MAX8997 && REGULATOR_MAX8997
|
|
help
|
|
Say Y to enable support for the battery charger control sysfs and
|
|
platform data of MAX8997/LP3974 PMICs.
|
|
|
|
config CHARGER_MAX8998
|
|
tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
|
|
depends on MFD_MAX8998 && REGULATOR_MAX8998
|
|
help
|
|
Say Y to enable support for the battery charger control sysfs and
|
|
platform data of MAX8998/LP3974 PMICs.
|
|
|
|
config CHARGER_QCOM_SMBB
|
|
tristate "Qualcomm Switch-Mode Battery Charger and Boost"
|
|
depends on MFD_SPMI_PMIC || COMPILE_TEST
|
|
depends on OF
|
|
help
|
|
Say Y to include support for the Switch-Mode Battery Charger and
|
|
Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
|
|
is an integrated, single-cell lithium-ion battery charger. DT
|
|
configuration is required for loading, see the devicetree
|
|
documentation for more detail. The base name for this driver is
|
|
'pm8941_charger'.
|
|
|
|
config CHARGER_BQ2415X
|
|
tristate "TI BQ2415x battery charger driver"
|
|
depends on I2C
|
|
help
|
|
Say Y to enable support for the TI BQ2415x battery charger
|
|
PMICs.
|
|
|
|
You'll need this driver to charge batteries on e.g. Nokia
|
|
RX-51/N900.
|
|
|
|
config CHARGER_BQ24190
|
|
tristate "TI BQ24190 battery charger driver"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y to enable support for the TI BQ24190 battery charger.
|
|
|
|
config CHARGER_BQ24257
|
|
tristate "TI BQ24250/24251/24257 battery charger driver"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
depends on REGMAP_I2C
|
|
help
|
|
Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
|
|
chargers.
|
|
|
|
config CHARGER_BQ24735
|
|
tristate "TI BQ24735 battery charger support"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y to enable support for the TI BQ24735 battery charger.
|
|
|
|
config CHARGER_BQ25890
|
|
tristate "TI BQ25890 battery charger driver"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select REGMAP_I2C
|
|
help
|
|
Say Y to enable support for the TI BQ25890 battery charger.
|
|
|
|
config CHARGER_SMB347
|
|
tristate "Summit Microelectronics SMB347 Battery Charger"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say Y to include support for Summit Microelectronics SMB347
|
|
Battery Charger.
|
|
|
|
config CHARGER_TPS65090
|
|
tristate "TPS65090 battery charger driver"
|
|
depends on MFD_TPS65090
|
|
help
|
|
Say Y here to enable support for battery charging with TPS65090
|
|
PMIC chips.
|
|
|
|
config CHARGER_TPS65217
|
|
tristate "TPS65217 battery charger driver"
|
|
depends on MFD_TPS65217
|
|
help
|
|
Say Y here to enable support for battery charging with TPS65217
|
|
PMIC chips.
|
|
|
|
config BATTERY_GAUGE_LTC2941
|
|
tristate "LTC2941/LTC2943 Battery Gauge Driver"
|
|
depends on I2C
|
|
help
|
|
Say Y here to include support for LTC2941 and LTC2943 Battery
|
|
Gauge IC. The driver reports the charge count continuously, and
|
|
measures the voltage and temperature every 10 seconds.
|
|
|
|
config AB8500_BM
|
|
bool "AB8500 Battery Management Driver"
|
|
depends on AB8500_CORE && AB8500_GPADC
|
|
help
|
|
Say Y to include support for AB8500 battery management.
|
|
|
|
config BATTERY_GOLDFISH
|
|
tristate "Goldfish battery driver"
|
|
depends on GOLDFISH || COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
Say Y to enable support for the battery and AC power in the
|
|
Goldfish emulator.
|
|
|
|
config BATTERY_RT5033
|
|
tristate "RT5033 fuel gauge support"
|
|
depends on MFD_RT5033
|
|
help
|
|
This adds support for battery fuel gauge in Richtek RT5033 PMIC.
|
|
The fuelgauge calculates and determines the battery state of charge
|
|
according to battery open circuit voltage.
|
|
|
|
config CHARGER_RT9455
|
|
tristate "Richtek RT9455 battery charger driver"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select REGMAP_I2C
|
|
help
|
|
Say Y to enable support for Richtek RT9455 battery charger.
|
|
|
|
config AXP20X_POWER
|
|
tristate "AXP20x power supply driver"
|
|
depends on MFD_AXP20X
|
|
help
|
|
This driver provides support for the power supply features of
|
|
AXP20x PMIC.
|
|
|
|
endif # POWER_SUPPLY
|
|
|
|
source "drivers/power/reset/Kconfig"
|
|
source "drivers/power/avs/Kconfig"
|