mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
f8cfa618dc
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.
With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:
int (*probe) (struct pcmcia_device *dev);
void (*remove) (struct pcmcia_device *dev);
int (*suspend) (struct pcmcia_device *dev);
int (*resume) (struct pcmcia_device *dev);
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
471 lines
14 KiB
C
471 lines
14 KiB
C
/*=======================================================/
|
|
Header file for nsp_cs.c
|
|
By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
|
|
|
|
Ver.1.0 : Cut unused lines.
|
|
Ver 0.1 : Initial version.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License.
|
|
|
|
=========================================================*/
|
|
|
|
/* $Id: nsp_cs.h,v 1.19 2003/08/18 11:09:19 elca Exp $ */
|
|
|
|
#ifndef __nsp_cs__
|
|
#define __nsp_cs__
|
|
|
|
/* for debugging */
|
|
//#define NSP_DEBUG 9
|
|
|
|
/*
|
|
#define static
|
|
#define inline
|
|
*/
|
|
|
|
/************************************
|
|
* Some useful macros...
|
|
*/
|
|
#define BIT(x) (1L << (x))
|
|
|
|
/* SCSI initiator must be ID 7 */
|
|
#define NSP_INITIATOR_ID 7
|
|
|
|
#define NSP_SELTIMEOUT 200
|
|
|
|
/***************************************************************************
|
|
* register definitions
|
|
***************************************************************************/
|
|
/*========================================================================
|
|
* base register
|
|
========================================================================*/
|
|
#define IRQCONTROL 0x00 /* R */
|
|
# define IRQCONTROL_RESELECT_CLEAR BIT(0)
|
|
# define IRQCONTROL_PHASE_CHANGE_CLEAR BIT(1)
|
|
# define IRQCONTROL_TIMER_CLEAR BIT(2)
|
|
# define IRQCONTROL_FIFO_CLEAR BIT(3)
|
|
# define IRQCONTROL_ALLMASK 0xff
|
|
# define IRQCONTROL_ALLCLEAR (IRQCONTROL_RESELECT_CLEAR | \
|
|
IRQCONTROL_PHASE_CHANGE_CLEAR | \
|
|
IRQCONTROL_TIMER_CLEAR | \
|
|
IRQCONTROL_FIFO_CLEAR )
|
|
# define IRQCONTROL_IRQDISABLE 0xf0
|
|
|
|
#define IRQSTATUS 0x00 /* W */
|
|
# define IRQSTATUS_SCSI BIT(0)
|
|
# define IRQSTATUS_TIMER BIT(2)
|
|
# define IRQSTATUS_FIFO BIT(3)
|
|
# define IRQSTATUS_MASK 0x0f
|
|
|
|
#define IFSELECT 0x01 /* W */
|
|
# define IF_IFSEL BIT(0)
|
|
# define IF_REGSEL BIT(2)
|
|
|
|
#define FIFOSTATUS 0x01 /* R */
|
|
# define FIFOSTATUS_CHIP_REVISION_MASK 0x0f
|
|
# define FIFOSTATUS_CHIP_ID_MASK 0x70
|
|
# define FIFOSTATUS_FULL_EMPTY BIT(7)
|
|
|
|
#define INDEXREG 0x02 /* R/W */
|
|
#define DATAREG 0x03 /* R/W */
|
|
#define FIFODATA 0x04 /* R/W */
|
|
#define FIFODATA1 0x05 /* R/W */
|
|
#define FIFODATA2 0x06 /* R/W */
|
|
#define FIFODATA3 0x07 /* R/W */
|
|
|
|
/*====================================================================
|
|
* indexed register
|
|
====================================================================*/
|
|
#define EXTBUSCTRL 0x10 /* R/W,deleted */
|
|
|
|
#define CLOCKDIV 0x11 /* R/W */
|
|
# define CLOCK_40M 0x02
|
|
# define CLOCK_20M 0x01
|
|
# define FAST_20 BIT(2)
|
|
|
|
#define TERMPWRCTRL 0x13 /* R/W */
|
|
# define POWER_ON BIT(0)
|
|
|
|
#define SCSIIRQMODE 0x15 /* R/W */
|
|
# define SCSI_PHASE_CHANGE_EI BIT(0)
|
|
# define RESELECT_EI BIT(4)
|
|
# define FIFO_IRQ_EI BIT(5)
|
|
# define SCSI_RESET_IRQ_EI BIT(6)
|
|
|
|
#define IRQPHASESENCE 0x16 /* R */
|
|
# define LATCHED_MSG BIT(0)
|
|
# define LATCHED_IO BIT(1)
|
|
# define LATCHED_CD BIT(2)
|
|
# define LATCHED_BUS_FREE BIT(3)
|
|
# define PHASE_CHANGE_IRQ BIT(4)
|
|
# define RESELECT_IRQ BIT(5)
|
|
# define FIFO_IRQ BIT(6)
|
|
# define SCSI_RESET_IRQ BIT(7)
|
|
|
|
#define TIMERCOUNT 0x17 /* R/W */
|
|
|
|
#define SCSIBUSCTRL 0x18 /* R/W */
|
|
# define SCSI_SEL BIT(0)
|
|
# define SCSI_RST BIT(1)
|
|
# define SCSI_DATAOUT_ENB BIT(2)
|
|
# define SCSI_ATN BIT(3)
|
|
# define SCSI_ACK BIT(4)
|
|
# define SCSI_BSY BIT(5)
|
|
# define AUTODIRECTION BIT(6)
|
|
# define ACKENB BIT(7)
|
|
|
|
#define SCSIBUSMON 0x19 /* R */
|
|
|
|
#define SETARBIT 0x1A /* W */
|
|
# define ARBIT_GO BIT(0)
|
|
# define ARBIT_FLAG_CLEAR BIT(1)
|
|
|
|
#define ARBITSTATUS 0x1A /* R */
|
|
/*# define ARBIT_GO BIT(0)*/
|
|
# define ARBIT_WIN BIT(1)
|
|
# define ARBIT_FAIL BIT(2)
|
|
# define RESELECT_FLAG BIT(3)
|
|
|
|
#define PARITYCTRL 0x1B /* W */
|
|
#define PARITYSTATUS 0x1B /* R */
|
|
|
|
#define COMMANDCTRL 0x1C /* W */
|
|
# define CLEAR_COMMAND_POINTER BIT(0)
|
|
# define AUTO_COMMAND_GO BIT(1)
|
|
|
|
#define RESELECTID 0x1C /* R */
|
|
#define COMMANDDATA 0x1D /* R/W */
|
|
|
|
#define POINTERCLR 0x1E /* W */
|
|
# define POINTER_CLEAR BIT(0)
|
|
# define ACK_COUNTER_CLEAR BIT(1)
|
|
# define REQ_COUNTER_CLEAR BIT(2)
|
|
# define HOST_COUNTER_CLEAR BIT(3)
|
|
# define READ_SOURCE (BIT(4) | BIT(5))
|
|
# define ACK_COUNTER (0)
|
|
# define REQ_COUNTER (BIT(4))
|
|
# define HOST_COUNTER (BIT(5))
|
|
|
|
#define TRANSFERCOUNT 0x1E /* R */
|
|
|
|
#define TRANSFERMODE 0x20 /* R/W */
|
|
# define MODE_MEM8 BIT(0)
|
|
# define MODE_MEM32 BIT(1)
|
|
# define MODE_ADR24 BIT(2)
|
|
# define MODE_ADR32 BIT(3)
|
|
# define MODE_IO8 BIT(4)
|
|
# define MODE_IO32 BIT(5)
|
|
# define TRANSFER_GO BIT(6)
|
|
# define BRAIND BIT(7)
|
|
|
|
#define SYNCREG 0x21 /* R/W */
|
|
# define SYNCREG_OFFSET_MASK 0x0f
|
|
# define SYNCREG_PERIOD_MASK 0xf0
|
|
# define SYNCREG_PERIOD_SHIFT 4
|
|
|
|
#define SCSIDATALATCH 0x22 /* W */
|
|
#define SCSIDATAIN 0x22 /* R */
|
|
#define SCSIDATAWITHACK 0x23 /* R/W */
|
|
#define SCAMCONTROL 0x24 /* W */
|
|
#define SCAMSTATUS 0x24 /* R */
|
|
#define SCAMDATA 0x25 /* R/W */
|
|
|
|
#define OTHERCONTROL 0x26 /* R/W */
|
|
# define TPL_ROM_WRITE_EN BIT(0)
|
|
# define TPWR_OUT BIT(1)
|
|
# define TPWR_SENSE BIT(2)
|
|
# define RA8_CONTROL BIT(3)
|
|
|
|
#define ACKWIDTH 0x27 /* R/W */
|
|
#define CLRTESTPNT 0x28 /* W */
|
|
#define ACKCNTLD 0x29 /* W */
|
|
#define REQCNTLD 0x2A /* W */
|
|
#define HSTCNTLD 0x2B /* W */
|
|
#define CHECKSUM 0x2C /* R/W */
|
|
|
|
/************************************************************************
|
|
* Input status bit definitions.
|
|
************************************************************************/
|
|
#define S_MESSAGE BIT(0) /* Message line from SCSI bus */
|
|
#define S_IO BIT(1) /* Input/Output line from SCSI bus */
|
|
#define S_CD BIT(2) /* Command/Data line from SCSI bus */
|
|
#define S_BUSY BIT(3) /* Busy line from SCSI bus */
|
|
#define S_ACK BIT(4) /* Acknowlege line from SCSI bus */
|
|
#define S_REQUEST BIT(5) /* Request line from SCSI bus */
|
|
#define S_SELECT BIT(6) /* */
|
|
#define S_ATN BIT(7) /* */
|
|
|
|
/***********************************************************************
|
|
* Useful Bus Monitor status combinations.
|
|
***********************************************************************/
|
|
#define BUSMON_SEL S_SELECT
|
|
#define BUSMON_BSY S_BUSY
|
|
#define BUSMON_REQ S_REQUEST
|
|
#define BUSMON_IO S_IO
|
|
#define BUSMON_ACK S_ACK
|
|
#define BUSMON_BUS_FREE 0
|
|
#define BUSMON_COMMAND ( S_BUSY | S_CD | S_REQUEST )
|
|
#define BUSMON_MESSAGE_IN ( S_BUSY | S_CD | S_IO | S_MESSAGE | S_REQUEST )
|
|
#define BUSMON_MESSAGE_OUT ( S_BUSY | S_CD | S_MESSAGE | S_REQUEST )
|
|
#define BUSMON_DATA_IN ( S_BUSY | S_IO | S_REQUEST )
|
|
#define BUSMON_DATA_OUT ( S_BUSY | S_REQUEST )
|
|
#define BUSMON_STATUS ( S_BUSY | S_CD | S_IO | S_REQUEST )
|
|
#define BUSMON_SELECT ( S_IO | S_SELECT )
|
|
#define BUSMON_RESELECT ( S_IO | S_SELECT )
|
|
#define BUSMON_PHASE_MASK ( S_CD | S_IO | S_MESSAGE | S_SELECT )
|
|
|
|
#define BUSPHASE_SELECT ( BUSMON_SELECT & BUSMON_PHASE_MASK )
|
|
#define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK )
|
|
#define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK )
|
|
#define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK )
|
|
#define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK )
|
|
#define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK )
|
|
#define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK )
|
|
|
|
/*====================================================================*/
|
|
|
|
typedef struct scsi_info_t {
|
|
dev_link_t link;
|
|
struct Scsi_Host *host;
|
|
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
|
|
dev_node_t node;
|
|
#else
|
|
int ndev;
|
|
dev_node_t node[8];
|
|
struct bus_operations *bus;
|
|
#endif
|
|
int stop;
|
|
} scsi_info_t;
|
|
|
|
|
|
/* synchronous transfer negotiation data */
|
|
typedef struct _sync_data {
|
|
unsigned int SyncNegotiation;
|
|
#define SYNC_NOT_YET 0
|
|
#define SYNC_OK 1
|
|
#define SYNC_NG 2
|
|
|
|
unsigned int SyncPeriod;
|
|
unsigned int SyncOffset;
|
|
unsigned char SyncRegister;
|
|
unsigned char AckWidth;
|
|
} sync_data;
|
|
|
|
typedef struct _nsp_hw_data {
|
|
unsigned int BaseAddress;
|
|
unsigned int NumAddress;
|
|
unsigned int IrqNumber;
|
|
|
|
unsigned long MmioAddress;
|
|
#define NSP_MMIO_OFFSET 0x0800
|
|
unsigned long MmioLength;
|
|
|
|
unsigned char ScsiClockDiv;
|
|
|
|
unsigned char TransferMode;
|
|
|
|
int TimerCount;
|
|
int SelectionTimeOut;
|
|
Scsi_Cmnd *CurrentSC;
|
|
//int CurrnetTarget;
|
|
|
|
int FifoCount;
|
|
|
|
#define MSGBUF_SIZE 20
|
|
unsigned char MsgBuffer[MSGBUF_SIZE];
|
|
int MsgLen;
|
|
|
|
#define N_TARGET 8
|
|
sync_data Sync[N_TARGET];
|
|
|
|
char nspinfo[110]; /* description */
|
|
spinlock_t Lock;
|
|
|
|
scsi_info_t *ScsiInfo; /* attach <-> detect glue */
|
|
|
|
|
|
#ifdef NSP_DEBUG
|
|
int CmdId; /* Accepted command serial number.
|
|
Used for debugging. */
|
|
#endif
|
|
} nsp_hw_data;
|
|
|
|
|
|
/****************************************************************************
|
|
*
|
|
*/
|
|
|
|
/* Card service functions */
|
|
static void nsp_cs_detach (struct pcmcia_device *p_dev);
|
|
static void nsp_cs_release(dev_link_t *link);
|
|
static void nsp_cs_config (dev_link_t *link);
|
|
|
|
/* Linux SCSI subsystem specific functions */
|
|
static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht);
|
|
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
|
|
static int nsp_detect_old (struct scsi_host_template *sht);
|
|
static int nsp_release_old(struct Scsi_Host *shpnt);
|
|
#endif
|
|
static const char *nsp_info (struct Scsi_Host *shpnt);
|
|
static int nsp_proc_info (
|
|
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
|
|
struct Scsi_Host *host,
|
|
#endif
|
|
char *buffer,
|
|
char **start,
|
|
off_t offset,
|
|
int length,
|
|
#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
|
|
int hostno,
|
|
#endif
|
|
int inout);
|
|
static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (* done)(Scsi_Cmnd *SCpnt));
|
|
|
|
/* Error handler */
|
|
/*static int nsp_eh_abort (Scsi_Cmnd *SCpnt);*/
|
|
/*static int nsp_eh_device_reset(Scsi_Cmnd *SCpnt);*/
|
|
static int nsp_eh_bus_reset (Scsi_Cmnd *SCpnt);
|
|
static int nsp_eh_host_reset (Scsi_Cmnd *SCpnt);
|
|
static int nsp_bus_reset (nsp_hw_data *data);
|
|
|
|
/* */
|
|
static int nsphw_init (nsp_hw_data *data);
|
|
static int nsphw_start_selection(Scsi_Cmnd *SCpnt);
|
|
static void nsp_start_timer (Scsi_Cmnd *SCpnt, int time);
|
|
static int nsp_fifo_count (Scsi_Cmnd *SCpnt);
|
|
static void nsp_pio_read (Scsi_Cmnd *SCpnt);
|
|
static void nsp_pio_write (Scsi_Cmnd *SCpnt);
|
|
static int nsp_nexus (Scsi_Cmnd *SCpnt);
|
|
static void nsp_scsi_done (Scsi_Cmnd *SCpnt);
|
|
static int nsp_analyze_sdtr (Scsi_Cmnd *SCpnt);
|
|
static int nsp_negate_signal (Scsi_Cmnd *SCpnt, unsigned char mask, char *str);
|
|
static int nsp_expect_signal (Scsi_Cmnd *SCpnt, unsigned char current_phase, unsigned char mask);
|
|
static int nsp_xfer (Scsi_Cmnd *SCpnt, int phase);
|
|
static int nsp_dataphase_bypass (Scsi_Cmnd *SCpnt);
|
|
static int nsp_reselected (Scsi_Cmnd *SCpnt);
|
|
static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht);
|
|
|
|
/* Interrupt handler */
|
|
//static irqreturn_t nspintr(int irq, void *dev_id, struct pt_regs *regs);
|
|
|
|
/* Module entry point*/
|
|
static int __init nsp_cs_init(void);
|
|
static void __exit nsp_cs_exit(void);
|
|
|
|
|
|
/* Debug */
|
|
#ifdef NSP_DEBUG
|
|
static void show_command (Scsi_Cmnd *SCpnt);
|
|
static void show_phase (Scsi_Cmnd *SCpnt);
|
|
static void show_busphase(unsigned char stat);
|
|
static void show_message (nsp_hw_data *data);
|
|
#else
|
|
# define show_command(ptr) /* */
|
|
# define show_phase(SCpnt) /* */
|
|
# define show_busphase(stat) /* */
|
|
# define show_message(data) /* */
|
|
#endif
|
|
|
|
/*
|
|
* SCSI phase
|
|
*/
|
|
enum _scsi_phase {
|
|
PH_UNDETERMINED ,
|
|
PH_ARBSTART ,
|
|
PH_SELSTART ,
|
|
PH_SELECTED ,
|
|
PH_COMMAND ,
|
|
PH_DATA ,
|
|
PH_STATUS ,
|
|
PH_MSG_IN ,
|
|
PH_MSG_OUT ,
|
|
PH_DISCONNECT ,
|
|
PH_RESELECT ,
|
|
PH_ABORT ,
|
|
PH_RESET
|
|
};
|
|
|
|
enum _data_in_out {
|
|
IO_UNKNOWN,
|
|
IO_IN,
|
|
IO_OUT
|
|
};
|
|
|
|
enum _burst_mode {
|
|
BURST_IO8 = 0,
|
|
BURST_IO32 = 1,
|
|
BURST_MEM32 = 2,
|
|
};
|
|
|
|
|
|
/**************************************************************************
|
|
* SCSI messaage
|
|
*/
|
|
#define MSG_COMMAND_COMPLETE 0x00
|
|
#define MSG_EXTENDED 0x01
|
|
#define MSG_ABORT 0x06
|
|
#define MSG_NO_OPERATION 0x08
|
|
#define MSG_BUS_DEVICE_RESET 0x0c
|
|
|
|
#define MSG_EXT_SDTR 0x01
|
|
|
|
|
|
/**************************************************************************
|
|
* Compatibility functions
|
|
*/
|
|
|
|
/* for Kernel 2.4 */
|
|
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
|
|
# define scsi_register_host(template) scsi_register_module(MODULE_SCSI_HA, template)
|
|
# define scsi_unregister_host(template) scsi_unregister_module(MODULE_SCSI_HA, template)
|
|
# define scsi_host_put(host) scsi_unregister(host)
|
|
|
|
typedef void irqreturn_t;
|
|
# define IRQ_NONE /* */
|
|
# define IRQ_HANDLED /* */
|
|
# define IRQ_RETVAL(x) /* */
|
|
|
|
/* This is ad-hoc version of scsi_host_get_next() */
|
|
static inline struct Scsi_Host *scsi_host_get_next(struct Scsi_Host *host)
|
|
{
|
|
if (host == NULL) {
|
|
return scsi_hostlist;
|
|
} else {
|
|
return host->next;
|
|
}
|
|
}
|
|
|
|
/* This is ad-hoc version of scsi_host_hn_get() */
|
|
static inline struct Scsi_Host *scsi_host_hn_get(unsigned short hostno)
|
|
{
|
|
struct Scsi_Host *host;
|
|
|
|
for (host = scsi_host_get_next(NULL); host != NULL;
|
|
host = scsi_host_get_next(host)) {
|
|
if (host->host_no == hostno) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return host;
|
|
}
|
|
|
|
static void cs_error(client_handle_t handle, int func, int ret)
|
|
{
|
|
error_info_t err = { func, ret };
|
|
pcmcia_report_error(handle, &err);
|
|
}
|
|
|
|
/* scatter-gather table */
|
|
# define BUFFER_ADDR (SCpnt->SCp.buffer->address)
|
|
#endif
|
|
|
|
/* for Kernel 2.6 */
|
|
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
|
|
/* scatter-gather table */
|
|
# define BUFFER_ADDR ((char *)((unsigned int)(SCpnt->SCp.buffer->page) + SCpnt->SCp.buffer->offset))
|
|
#endif
|
|
|
|
#endif /*__nsp_cs__*/
|
|
/* end */
|