mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-26 20:44:32 +08:00
b5f8ffbb6f
Convert DRA7xx to use the new clockdomain based layout. Previously the clkctrl split was based on CM isntance boundaries. The new layout helps with introducing the interconnect driver instances. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
591 lines
12 KiB
Plaintext
591 lines
12 KiB
Plaintext
/*
|
|
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "dra74x.dtsi"
|
|
#include "am57xx-commercial-grade.dtsi"
|
|
#include "dra74x-mmc-iodelay.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
|
|
|
|
aliases {
|
|
rtc0 = &mcp_rtc;
|
|
rtc1 = &tps659038_rtc;
|
|
rtc2 = &rtc;
|
|
display0 = &hdmi0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart3;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x80000000 0x0 0x80000000>;
|
|
};
|
|
|
|
vdd_3v3: fixedregulator-vdd_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_3v3";
|
|
vin-supply = <®en1>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
aic_dvdd: fixedregulator-aic_dvdd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "aic_dvdd_fixed";
|
|
vin-supply = <&vdd_3v3>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vtt_fixed: fixedregulator-vtt {
|
|
/* TPS51200 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vtt_fixed";
|
|
vin-supply = <&smps3_reg>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led0 {
|
|
label = "beagle-x15:usr0";
|
|
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "off";
|
|
};
|
|
|
|
led1 {
|
|
label = "beagle-x15:usr1";
|
|
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "cpu0";
|
|
default-state = "off";
|
|
};
|
|
|
|
led2 {
|
|
label = "beagle-x15:usr2";
|
|
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "mmc0";
|
|
default-state = "off";
|
|
};
|
|
|
|
led3 {
|
|
label = "beagle-x15:usr3";
|
|
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "disk-activity";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
gpio_fan: gpio_fan {
|
|
/* Based on 5v 500mA AFB02505HHB */
|
|
compatible = "gpio-fan";
|
|
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
|
|
gpio-fan,speed-map = <0 0>,
|
|
<13000 1>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
hdmi0: connector {
|
|
compatible = "hdmi-connector";
|
|
label = "hdmi";
|
|
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&tpd12s015_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpd12s015: encoder {
|
|
compatible = "ti,tpd12s015";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tpd12s015_in: endpoint {
|
|
remote-endpoint = <&hdmi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tpd12s015_out: endpoint {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
sound0: sound0 {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "BeagleBoard-X15";
|
|
simple-audio-card,widgets =
|
|
"Line", "Line Out",
|
|
"Line", "Line In";
|
|
simple-audio-card,routing =
|
|
"Line Out", "LLOUT",
|
|
"Line Out", "RLOUT",
|
|
"MIC2L", "Line In",
|
|
"MIC2R", "Line In";
|
|
simple-audio-card,format = "dsp_b";
|
|
simple-audio-card,bitclock-master = <&sound0_master>;
|
|
simple-audio-card,frame-master = <&sound0_master>;
|
|
simple-audio-card,bitclock-inversion;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&mcasp3>;
|
|
};
|
|
|
|
sound0_master: simple-audio-card,codec {
|
|
sound-dai = <&tlv320aic3104>;
|
|
clocks = <&clkout2_clk>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tps659038: tps659038@58 {
|
|
compatible = "ti,tps659038";
|
|
reg = <0x58>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
|
|
ti,system-power-controller;
|
|
ti,palmas-override-powerhold;
|
|
|
|
tps659038_pmic {
|
|
compatible = "ti,tps659038-pmic";
|
|
|
|
regulators {
|
|
smps12_reg: smps12 {
|
|
/* VDD_MPU */
|
|
regulator-name = "smps12";
|
|
regulator-min-microvolt = < 850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps3_reg: smps3 {
|
|
/* VDD_DDR */
|
|
regulator-name = "smps3";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps45_reg: smps45 {
|
|
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
|
|
regulator-name = "smps45";
|
|
regulator-min-microvolt = < 850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps6_reg: smps6 {
|
|
/* VDD_CORE */
|
|
regulator-name = "smps6";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* SMPS7 unused */
|
|
|
|
smps8_reg: smps8 {
|
|
/* VDD_1V8 */
|
|
regulator-name = "smps8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* SMPS9 unused */
|
|
|
|
ldo1_reg: ldo1 {
|
|
/* VDD_SD / VDDSHV8 */
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: ldo2 {
|
|
/* VDD_SHV5 */
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo3_reg: ldo3 {
|
|
/* VDDA_1V8_PHYA */
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo4_reg: ldo4 {
|
|
/* VDDA_1V8_PHYB */
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo9_reg: ldo9 {
|
|
/* VDD_RTC */
|
|
regulator-name = "ldo9";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldoln_reg: ldoln {
|
|
/* VDDA_1V8_PLL */
|
|
regulator-name = "ldoln";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldousb_reg: ldousb {
|
|
/* VDDA_3V_USB: VDDA_USBHS33 */
|
|
regulator-name = "ldousb";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
regen1: regen1 {
|
|
/* VDD_3V3_ON */
|
|
regulator-name = "regen1";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
tps659038_rtc: tps659038_rtc {
|
|
compatible = "ti,palmas-rtc";
|
|
interrupt-parent = <&tps659038>;
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-source;
|
|
};
|
|
|
|
tps659038_pwr_button: tps659038_pwr_button {
|
|
compatible = "ti,palmas-pwrbutton";
|
|
interrupt-parent = <&tps659038>;
|
|
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-source;
|
|
ti,palmas-long-press-seconds = <12>;
|
|
};
|
|
|
|
tps659038_gpio: tps659038_gpio {
|
|
compatible = "ti,palmas-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
extcon_usb2: tps659038_usb {
|
|
compatible = "ti,palmas-usb-vid";
|
|
ti,enable-vbus-detection;
|
|
vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
};
|
|
|
|
tmp102: tmp102@48 {
|
|
compatible = "ti,tmp102";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
tlv320aic3104: tlv320aic3104@18 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "ti,tlv320aic3104";
|
|
reg = <0x18>;
|
|
assigned-clocks = <&clkoutmux2_clk_mux>;
|
|
assigned-clock-parents = <&sys_clk2_dclk_div>;
|
|
|
|
status = "okay";
|
|
adc-settle-ms = <40>;
|
|
|
|
AVDD-supply = <&vdd_3v3>;
|
|
IOVDD-supply = <&vdd_3v3>;
|
|
DRVDD-supply = <&vdd_3v3>;
|
|
DVDD-supply = <&aic_dvdd>;
|
|
};
|
|
|
|
eeprom: eeprom@50 {
|
|
compatible = "atmel,24c32";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
mcp_rtc: rtc@6f {
|
|
compatible = "microchip,mcp7941x";
|
|
reg = <0x6f>;
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&dra7_pmx_core 0x424>;
|
|
interrupt-names = "irq", "wakeup";
|
|
|
|
vcc-supply = <&vdd_3v3>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&gpio7 {
|
|
ti,no-reset-on-init;
|
|
ti,no-idle-on-init;
|
|
};
|
|
|
|
&cpu0 {
|
|
vdd-supply = <&smps12_reg>;
|
|
voltage-tolerance = <1>;
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&dra7_pmx_core 0x3f8>;
|
|
};
|
|
|
|
&davinci_mdio {
|
|
phy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@2 {
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
&mac {
|
|
status = "okay";
|
|
dual_emac;
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii";
|
|
dual_emac_res_vlan = <1>;
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy-handle = <&phy1>;
|
|
phy-mode = "rgmii";
|
|
dual_emac_res_vlan = <2>;
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
|
|
};
|
|
|
|
&mmc2 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins_default>;
|
|
|
|
vmmc-supply = <&vdd_3v3>;
|
|
vqmmc-supply = <&vdd_3v3>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
no-1-8-v;
|
|
};
|
|
|
|
&sata {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
phy-supply = <&ldousb_reg>;
|
|
};
|
|
|
|
&usb2_phy2 {
|
|
phy-supply = <&ldousb_reg>;
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&omap_dwc3_2 {
|
|
extcon = <&extcon_usb2>;
|
|
};
|
|
|
|
&usb2 {
|
|
/*
|
|
* Stand alone usage is peripheral only.
|
|
* However, with some resistor modifications
|
|
* this port can be used via expansion connectors
|
|
* as "host" or "dual-role". If so, provide
|
|
* the necessary dr_mode override in the expansion
|
|
* board's DT.
|
|
*/
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&cpu_trips {
|
|
cpu_alert1: cpu_alert1 {
|
|
temperature = <50000>; /* millicelsius */
|
|
hysteresis = <2000>; /* millicelsius */
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&cpu_cooling_maps {
|
|
map1 {
|
|
trip = <&cpu_alert1>;
|
|
cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&thermal_zones {
|
|
board_thermal: board_thermal {
|
|
polling-delay-passive = <1250>; /* milliseconds */
|
|
polling-delay = <1500>; /* milliseconds */
|
|
|
|
/* sensor ID */
|
|
thermal-sensors = <&tmp102 0>;
|
|
|
|
board_trips: trips {
|
|
board_alert0: board_alert {
|
|
temperature = <40000>; /* millicelsius */
|
|
hysteresis = <2000>; /* millicelsius */
|
|
type = "active";
|
|
};
|
|
|
|
board_crit: board_crit {
|
|
temperature = <105000>; /* millicelsius */
|
|
hysteresis = <0>; /* millicelsius */
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
board_cooling_maps: cooling-maps {
|
|
map0 {
|
|
trip = <&board_alert0>;
|
|
cooling-device =
|
|
<&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
|
|
vdda_video-supply = <&ldoln_reg>;
|
|
};
|
|
|
|
&hdmi {
|
|
status = "ok";
|
|
vdda-supply = <&ldo4_reg>;
|
|
|
|
port {
|
|
hdmi_out: endpoint {
|
|
remote-endpoint = <&tpd12s015_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie1_rc {
|
|
status = "ok";
|
|
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&pcie1_ep {
|
|
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&mcasp3 {
|
|
#sound-dai-cells = <0>;
|
|
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
|
|
assigned-clock-parents = <&sys_clkin2>;
|
|
status = "okay";
|
|
|
|
op-mode = <0>; /* MCASP_IIS_MODE */
|
|
tdm-slots = <2>;
|
|
/* 4 serializers */
|
|
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
|
1 2 0 0
|
|
>;
|
|
tx-num-evt = <32>;
|
|
rx-num-evt = <32>;
|
|
};
|
|
|
|
&mailbox5 {
|
|
status = "okay";
|
|
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
|
|
status = "okay";
|
|
};
|
|
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mailbox6 {
|
|
status = "okay";
|
|
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
|
|
status = "okay";
|
|
};
|
|
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
|
|
status = "okay";
|
|
};
|
|
};
|